. QAQC Inspector (Fabrication /Welding)

Responsibilities:

• Preparing or establishing that a welding procedure is available, has been approved as

required by the appropriate authority and is being employed in production.

• Witnessing of welder and procedure approval tests that including of the preparation of test

pieces and destructive tests and verifying compliance with appropriate standards and

specifications.

• Verification that adequate and valid welder approvals are available, and that only approved

welders as required are used in production.

• Interpretation of weld drawings and weld symbols.

• Performing of visual inspection and ensure that all finished goods are checked and approved

prior to any delivery of handover.

• Verification that post weld heat treatment has been conducted in accordance with

specification requirements.

• Appreciation of the factors influencing the formation of weld defects and their acceptability

in relation to the written specification.

• Coordination with QC Inspector (Hull/Structure and Piping) and NDT Coordinator, to verify

and ensure that all finished welds are checked and approved prior to any delivery of

handover.

• Ensure that quality assurance standards and procedures are maintained.

• Ensure that reports that are required are completed accordingly to the project

specifications.

• Liaise with Contractor, Production and Client’s representative to ensure the product is

checked and complied with the project quality plan and specifications.

• Perform any other tasks as may be assigned by the supervisor.

• Ensure compliance to relevant government regulations and company’s quality, safety, health

and environmental (QSHE) policies, practices and procedures at all times.

Requirements:

• Minimum Diploma in Engineering or relevant field of International certification (e.g. AWSCWI or CSWIP 3.1 WI).

• Physically fit since some of tasks require lifting of some equipment.

• A team player with the ability to work independently as well as in a team

• Good communication skills, meticulous, resourceful, able to multi-task

• Computer literary (MS. Office).

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

JOB DESCRIPTION:

• UAT testing of existing products and driver/firmware
• Perform functional test, regression test, performance test, sanity test and other tests
• Liase with internal teams (e.g. project lead/developer/team members) to on bugs and product quality
• Co-work with R&D team to reproduce customer issues and verify fixes
• Track and isolate problems, verify resolutions, and qualify bug fixes

JOB REQUIREMENTS:

• Any engineering diploma holder or any engineering bachelor's degree holder who are interested in the testing field
• Good problem solver, ability to troubleshoot and think out of box
• Inquisitive mind, paying attention to small details and good observer
• Strong attention to detail, able to identify discrepancies during the test process
• Analytical mind to correctly judge product behaviour
• Excellent time-management skills and commitment to meet deadlines
• Good communication skills and a team player

Job Title for Posting

Assistant Laser Ablation Engineer

KEY JOB PURPOSE

You are required to ensure the smooth operation of his/her assigned process unit. Your primary responsibility will be to assist our research team in conducting experiments (including coating process) and providing technical support to advance the understanding and performance of the solar cell fabrication processes. You will work closely with researchers and process engineers to contribute to cutting-edge research in the field and help drive the development of next-generation photovoltaics.

KEY RESPONSIBILITIES

The job scope includes:

• Able to work from 8.30am - 5.30pm / 2:30pm - 11:30pm / 9:00pm - 6.00am.
• Prepares substrates/precursors, loads samples, in charge of laser ablation process, and prepares material coating process for experimentation in time and quality
• Evaluates performance of process system.
• Interface with team members, understand their detailed plan and requirement.
• Monitor process and hardware performance.
• Records process conditions and experimental observations.
• Report data to the research team.
• Assist in laboratory and equipment maintenance.
• Perform routine shut down procedure, if needed.
• Ensure cleanliness of work area, upkeep equipment and assists in maintenance program and operating of equipment.

COMPETENCIES AND QUALIFICATION REQUIREMENTS

• Diploma or Bachelor's degree in materials science, chemistry, electrical engineering, chemical engineering, or a related field.
• Enjoy hands-on duties daily (non-desk bound) which may include carrying items, walking, working etc.
• Capable to work in a clean laboratory environment daily
• No disciplinary issues history
• Self-disciplined, good team player
• Responsible and independent worker
• Reactive to malfunctions
• High self-motivated and effective team player with good communication skills
• Attentive to details
• Good written and verbal communication skills (both in Mandarin and English)
• Knowledge of safety protocols and practices in a laboratory setting.

ABRIDGED VERSION OF JOB DESCRIPTION AND REQUIREMENTS

We are looking for a focused and highly motivated individual to contribute to a dynamic and growing team. This team focuses on the fabrication of next-generation photovoltaic technology in our flagship project. We regret that only shortlisted candidates will be notified.

Job Title for Posting

Assistant Process Engineer

KEY JOB PURPOSE

You are required to ensure the smooth operation of his/her assigned process unit. Your primary responsibility will be to assist our research team in conducting experiments (including coating process) and providing technical support to advance the understanding and performance of the solar cell fabrication processes. You will work closely with researchers and process engineers to contribute to cutting-edge research in the field and help drive the development of next-generation photovoltaics.

KEY RESPONSIBILITIES

The job scope includes:

• Able to work from 1:00pm - 10:00pm
• Prepares substrates/precursors, loads samples, in charge of coating process, and prepares material coating process for experimentation in time and quality
• Evaluates performance of process system.
• Interface with team members, understand their detailed plan and requirement.
• Monitor process and hardware performance.
• Records process conditions and experimental observations.
• Report data to the research team.
• Assist in laboratory and equipment maintenance.
• Perform routine shut down procedure, if needed.
• Ensure cleanliness of work area, upkeep equipment and assists in maintenance program and operating of equipment.

COMPETENCIES AND QUALIFICATION REQUIREMENTS

• Diploma or Bachelor's degree in materials science, chemistry, electrical engineering, chemical engineering, or a related field.
• Enjoy hands-on duties daily (non-desk bound) which may include carrying items, walking, working etc.
• Capable to work in a clean laboratory environment daily
• No disciplinary issues history
• Self-disciplined, good team player
• Responsible and independent worker
• Reactive to malfunctions
• High self-motivated and effective team player with good communication skills
• Attentive to details
• Good written and verbal communication skills (both in Mandarin and English)
• Knowledge of safety protocols and practices in a laboratory setting.

ABRIDGED VERSION OF JOB DESCRIPTION AND REQUIREMENTS

We are looking for a focused and highly motivated individual to contribute to a dynamic and growing team. This team focuses on the fabrication of next-generation photovoltaic technology in our flagship project. We regret that only shortlisted candidates will be notified.

Job Description:-

• Assist in managing the overall project from concept to completion, including support in planning, scheduling, budgeting, and coordinating with stakeholders, while following the Project Quality Plan, Safety Management Plan, and Building Execution Plan.
• Assist in the preparation and management of project documentation, including drawings, specifications, and weekly progress reports.
• Work with design engineers for as-built drawings, section drawings.
• Supervise and monitor workers / welders on site for installation or maintenance.
• attend site meetings with clients / architects and authorities on project technical matters.

Requirements:-

• Minmum Diploma in either mechanical, Electrical or Construction Engineering or other relevant discipline.
• Required skill(s), MS Office, MS Project AutoCad.
• Has work experience in construction sites.
• Responsible team player with the ability to work independently in challenging projects and timelines.

• 5 days, MNC, Boon Lay, transport provided (2 ways)
• Salary: $4000 - $4800, 1mth AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Minimum 1 year to 2 years of relevant experience
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals

Role Description:

VS1

This position reports to the Production Superintendent and is an integral member of Production Shift Team. GSK is committed to an employee-orientated, high performance culture that emphasises process automation, quality compliance and continuous improvement.

Trainee to be involved in:

• To execute key process operations in accordance to established batch instructions and schedule to make APIs and intermediates as well as plant changeover
• To learn Process and Workplace Safety and cGMP knowledge for manufacturing and to demonstrate understanding during execution
• To identify opportunity for improvements and able to carry out short term improvement projects to achieve benefit
• Inspects and maintains house-keeping of his assigned area for clean and safe working conditions as well as ensuring that personal protection equipment and safety equipment are maintained ready for use.
• Perform plant trouble shooting using appropriate problem- solving tool to minimize plant stoppages and safety or quality incidents.

VS2

This position reports to the Shift Operations Superintendent and is an integral member of Operations Team. GSK is committed to an employee-orientated, high performance culture that emphasises process automation, quality compliance and continuous improvement.

Trainee will be trained to operate all API manufacturing related equipment and facilities in his assigned area in compliance with GMP and EHS requirements. Trainee to adhere to strict recording and filling of batch / manufacturing records, process safety and general housekeeping of all work areas. To provide practical processing inputs to identify opportunities for process improvement.

Trainee to be involved in:

• Involve in hands-on execution of the plant operations and assist in trouble-shooting
• Monitor and analyze processing parameters for atypical trends and improvement opportunities
• Perform raw material dispensing and equipment configuration with additional logistical support responsibility
• Prior experience with analytical instrument will be a plus point
• Actively support continuous improvement initiative
• Support quality or safety related investigation using appropriate problem-solving tool to determine the root causes and implement CAPA to prevent recurrence.
• Support Quality & Safety audits
• Adhere to any applicable EHS requirements
• Ability to adhere to regulatory requirements, written procedures and safety guidelines
• Ability to evaluate documentation/data according to company and regulatory guidelines
• Ability to interact with inspectors (internal and external)
• Ability to interpret and apply Good Manufacturing Practice (GMP) knowledge
• Basic mathematical skills
• Ability to organize work and handle multiple priorities and meet deadlines
• Ability to understand, apply and evaluate basic chemistry and physical principles

We are looking for you with below attributes:

VS1

• ITE/ Diploma in Chemical Process/ Technology/ Engineering related

VS2

• NTC/ITC/Diploma/Degree in Science or Engineering

What you will learn:

VS1

• Foundational on-the-job training experience working in cGMP and key Global Supply API manufacturing site with state of art manufacturing facilities, including first in class Continuous Manufacturing facility
• To train to be an advocate for Continuous Improvement, with introductory basics on Lean Sigma concepts and coaching by supervisors to complete practical application through completion of improvement project

VS2

• Demonstrate commitment to cGMP, EHS compliance aspects of pharmaceutical plant operation
• Excellent self-motivated team player with hands-on attitude and good communication skills
• Ability to understand, apply and evaluate basic chemistry and physical principles
• Ability and willingness to work on 12-hour shift operations

This will be a 12-hours shift work.

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Jurong.

How can I apply?

Applications are now open, please apply via this link: https://gsk.wd5.myworkdayjobs.com/GSKCareers/job/Singapore---Jurong/TnP-Trainee---Operations-Technician_379975-1

We recommend you apply as soon as possible, because we accept ongoing applications and offer positions on a first come, first served basis!

At GSK we value diversity and treat all candidates equally. We strive to make our recruitment process free of bias of any kind and aim to create an inclusive workplace at GSK. If you require any assistance, either to attend an interview or during the course of the recruitment process, please let us know

• 5 days, MNC, Boon Lay, transport provided (2 ways)
• Salary: $4000 - $4800, 1mth AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Minimum 1 year to 2 years of relevant experience
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• 5 days, MNC, Boon Lay, transport provided (2 ways)
• Salary: $4000 - $4800, 1mth AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Minimum 1 year to 2 years of relevant experience
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• 5 days, MNC, Boon Lay, transport provided (2 ways)
• Salary: $4000 - $4800, 1mth AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Minimum 1 year to 2 years of relevant experience
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Responsibilities:

• To cover design aspects for systems such as Radars, Navigation Comms, Integrated Comms, Integrated Combat Systems and Layout designs
• Work with other trades on integration design between Platform and Systems
• To prepare the General Arrangement Plan (GAP)
• Preparation of tender proposal and technical specifications for tender submission
• Establish Major Equipment Specifications and Selections
• To check and ensure equipment specification, technical information, functional description document, installation control document and interface design specification are correct and properly maintained, disseminate and use for the preparation of design work activities
• Planning and control of Basic design document schedule to support project milestone
• To develop of new designs and design concepts;
• To source for new design tools;
• To provide specialist technical assessment and analysis other in-house departments and external parties
• To continue updating the developing and expanding of the design database
• To participate in tests and sea trials, including HAT and SAT, where required
• Perform detail design calculation where necessary
• To follow up and resolve all the design issues raised by Owner, Classification and Statutory Authorities on all design documents promptly and timely to support the schedule, including on site checking and discussions
• To generate 2D arrangement drawings for major equipment
• To generate list of design drawing / document specific to each project
• To check working drawings and ensure that they conform to contractual technical specification, installation control documents, Classification and Statutory Rules/Regulations
• To keep abreast with current technological developments and products, Classification rules, military and industrial standards and other standards relevant to design activities.

Requirements:

• Degree in Electrical & Electronics Engineering
• 3 to 5 years of relevant experience in Marine related projects on Navigation Communications Systems and Radars (Fire Contol & Surveillance) will be advantageous
• Possess both project management and man management experience
• Ability to manage external and internal stakeholders will be critical for this role
• Proficiency in AutoCAD
• Only Singaporeans will be considered for this role

Additional Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

Job Purpose :

Engineer produces specifications for, design, develop technical drawings. He/she is expected to service and give technical advice to customers and fellow colleagues. He/she will be the main contact person for shutdown projects.

Duties and Responsibilities :

* Attend site / plant shutdown meeting

* Relay information to sales to work on preliminary quotation

* Liaise with Customers and Sales to carry out production of work orders as specified

* Liaise with Sales with regards to availability of raw materials for production or request purchase of required material when necessary.

* Monitoring progress reports on gasket usage by Customers during plan shutdown (container service) and generate weekly consumption report for customer.

* Compile and consolidate all expenses incurred by the Company (ie. manpower, overtime, meals and transportation) during shutdown project period.

* Attend to quality and technical problems at client's site and recommend the use of appropriate substitutes.

* Attend to quality and technical questions from fellow colleagues.

* Planning of work schedule for shutdown projects.

* Allocation of manpower for shutdown projects.

* Conduct product presentation to customer.

* Verify materials for use in manufacturing as specified in the work orders.

* Ensure smooth running of projects from beginning to the end.

* Ensure to meet customer's project deadline within time frame given.

* Ensure stocks are sufficient to support customers during the shutdown project.

* Maintain and housekeep all records of equipment drawings.

* Handle customer's complaint, if any

* Determine and plan training requirement needs of subordinating staff.

* Plan for the staffing requirements and recruitment of new employees if needed.

* Design technical training materials for other departments.

* Any other duties assigned by Business Unit Manager.

Responsibilities

• Support and maintain organization’s computer systems, desktops, and peripherals.
• Perform end user supports.
• Install and maintain IT equipment and software.
• Troubleshoot hardware and software issues.
• Generating MIS reports
• Strong problem-solving and troubleshooting skills.
• Strong communication and customer service skills.
• Ability to work independently as well as in a team environment.
• Flexibility to work outside of normal business hours, if required.

Job Specification

• 1 - 2 years of experience in desktop support, maintenance, and basic infrastructure/network troubleshooting.
• Those who have strong technical knowledge of desktop operating systems, desktop applications, and IT hardware but without the working experiences are welcome to apply.
• Perform onsite and remote troubleshooting to resolve end users’ issues.
• Ask questions to pinpoint problem.
• Setup workstations for new employees.
• New user account creation.
• Setup and provide support for Microsoft Outlook on Users’ workstations.
• Assist in IT report generation.
• Purchase of IT equipment, including getting the quotations.
• Maintain IT asset inventory documents.

Yee Jie Ling Jaslin | EA Reg. no.: R1440114

RS Recruitment Agency LLP | EA Licence no.: 17C8809

Purpose and Scope

We are seeking a highly skilled and motivated E&I Engineer to lead the E&I Maintenance team. The ideal candidate will possess extensive experience in electrical and instrumentation systems within power or utilities plant environments. This role involves ensuring optimal performance, safety, and reliability of E&I equipment while leading maintenance initiatives and improvements.

Key Roles and Responsibilities

• HSSE Compliance: Ensure adherence to plant Health, Safety, Security, and Environment (HSSE) standards. Actively participate in HSSE walkdowns and initiatives to maintain high safety standards.
• Methodology Preparation: Develop, review, and implement Method Statements (MS) and Risk Assessments (RA) for all electrical and instrumentation work activities to mitigate risks and enhance safety.
• Maintenance Planning: Plan and schedule both corrective and preventive maintenance works. Collaborate with operations, OEMs, and contractors to prioritize tasks, mobilize workforce, allocate resources, and procure necessary spare parts.
• Team Leadership: Lead and mentor technicians in executing preventive and corrective maintenance tasks, ensuring adherence to procedures and standards.
• Issue Troubleshooting: Diagnose and troubleshoot critical and major plant issues, participate in Root Cause Analysis (RCA) to identify solutions, and drive continuous plant improvement initiatives while managing costs effectively.
• Shutdown Management: Plan, schedule, and coordinate vendor/OEM shutdown maintenance of E&I systems. Lead shutdown activities and ensure thorough documentation is maintained.
• Procedure Development: Establish and optimize maintenance procedures for all electrical and instrumentation systems, promoting best practices.
• Instrumentation Expertise: Conduct maintenance and troubleshooting on field instrumentation, including control valves, performing loop checks, and executing calibration of instrumentation systems.
• Control Systems Proficiency: Troubleshoot and maintain PLC (Programmable Logic Controller) and DCS (Distributed Control Systems), with a strong emphasis on experience with Yokogawa Centum DCS systems.
• Electrical Systems Maintenance: Provide expertise in maintaining electrical systems, including switchgear, transformers, MV/LV switchboards, Fire alarm and CCTV systems.
• Spare Parts Management: Oversee the review and maintenance of plant critical spare parts inventory, ensuring availability and readiness.
• Documentation and Reporting: Maintain accurate records of maintenance activities and contribute to the preparation of technical documentation, standard operating procedures (SOPs), and maintenance manuals.
• Ad-hoc Duties: Execute other tasks and responsibilities as assigned to support operational objectives.

Qualification, Skills and Experience

• Bachelor’s degree or diploma in Electrical, Instrumentation, or Control System Engineering.
• Minimum of 8 years of relevant experience in a power plant or utilities plant environment.
• Technical Proficiency: Strong knowledge of field instrumentation, electrical systems, control systems, and industry standards.
• Problem Solving: Excellent analytical and troubleshooting abilities with a methodical approach to problem resolution.
• Team Collaboration: Proven ability to work effectively in a team environment, fostering collaboration and teamwork.
• Communication Skills: Strong communication and interpersonal skills, with the ability to present technical information clearly to various stakeholders.
• Proactive Attitude: Demonstrated ability to stay current with new technologies and apply innovative solutions to optimize plant operations.
• Leadership Qualities: Effective leadership and mentoring skills with a commitment to developing team members.
• Adaptability: Flexible and resourceful, with a positive attitude and willingness to learn from experienced colleagues.

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Descriptions:

• To ensure all the maintenance works carried out systematically, efficiently & safely.
• By improving existing preventive maintenance system thus reduce maintenance cost and improve performance of equipment.
• To be the initiator and coordinator of MOC for any addition, modification and replacement in the system.
• To assist the Section Manager and Supervisor to co-ordinate and supervise the day to day activities.
• To troubleshoot Mechanical Equipment / Systems’ problems when it runs abnormally malfunction.
• To work closely with the operation team for daily, weekly and monthly maintenance programmed to maintain all equipment running efficiently, safely and smoothly.
• To train all technician and staffs on equipment maintenance and monitor the 5S and TPM activities carried out in the section.
• To assist the Section Manager to propose and implement action plans to rectify faults occurring in the system/processes.
• To be involved in new project management time to time and be responsible for document preparation and other paper works, as well as co-ordination with contractors & Vendors.
• To manage all Mechanical & electrical Instruments spare parts and tools.

Job Requirements:

• Bachelor Degree in Mechanical Engineering
• Self-motivated, able to work independently and with a team to completion of tasks

Remuneration:

• Working hours - Monday to Friday: 8am to 5pm ,Alternate Saturday: 8am to 5pm
• Company Transport / Transport Allowance $120 if possess own transport
• AWS
• Performance Bonus
• Medical Benefits
• Sign-on Bonus

• Responsible for all on-site technical and engineering matters
• Ensuring works carried out meet company's quality standards &contractual requirements
• Involved in project planning, monitoring project progress and schedule
• To co-ordinate with the client, sub-contractors on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• Assisting Project Manager in monthly progress claims and monthly progress reports.
• Ensuring supervisors & foremen meets client &regulatory work requirements.
• Ensuring Environmental, Safety and Health practices are carried out at all times.

Job Requirements

• Min 3 years in precast work planning, coordination is a must.
• Degree in Civil or Structural Engineering recognized by Professional Engineers Board Singapore or Building Construction Authority Singapore is a must.
• Min 3-5 years of Civil Engineering Experience
• Required skill(s): Precast will be preferred.
• Proficient in Microsoft Office
• Organised, meticulous with positive work attitude
• Good interpersonal and analytical skills
• BCSS or equivalent
• Able to start work on short notice
• Candidates will also be considered for Project Engineer (Planning- Civil Engineering) position based on education level and working experience.

Responsibilities:

1. To supervise and manage the functions of Repacking/Containment/ICW operations and Maintenance.
2. To monitor the safe process flow and backlog level of TIW waste.
3. Ensure all staff are well trained according to OJT programme and following the safe work procedures and SOPs.
4. To ensure the effectiveness and smoothness of coordination with operation and sales team and customer service maintaining high quality of services.
5. To monitor the outgoing containment purchase budget and encourage the recycling of used containment to save cost.
6. Daily and regular inspection of the operation processes and monitor the plant 5S and TPM activities, safety and discipline at works, machineries and equipment conditions.
7. Work with Lab chemists to evaluate and develop new treatment methods and handing procedures for new and unknown wastes, and review of operation costs and regular update to management.

Requirements:

• Degree in Chemical Engineering or Chemistry
• At least 2 year relevant experience

Remuneration:

• Basic salary: $3,400 – $3,800
• Company Transport / Transport Allowance $120 if candidate possess own transport
• Working Hours: Monday to Friday: 8am to 5pm
• AWS & VB
• Sign-on bonus

Job Description:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• At least a Bachelor in Chemical Engineering
• Min 1 years of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Others:

• Working hours : Mon to Fri (8am to 5pm)
• Company Transport / Transport Allowance if candidate travel to work by him/herself (S$120)

Element has an opportunity for Lab Engineer for Singapore. In this role, you will be involved in project plan, coordination, operation for soil investigation works. Attend the project meeting if required. Day-to-day site operation to ensure works are constructed as per project & safety requirement. Identify the soil/rock & record the field log. Take the soil sample for lab test. Supervise site works. Liaise with clients on site works / projects. Plan and arrange the Logistics

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Schedule the testing programmes according to priority
• Execute the soil testing works to determine the physical and mechanical of the soil samples: Supervise the technicians to prepare the correct samples for soil testing (e.g., check the assignment and UD soil samples)
• Carry out extrusion of the soil samples
• Liaise with clients for samples that are unable to meet their requirements for their decision-making
• Carry out the soil tests according to BS standards or standards specified by clien and submit the approved soil testing reports to clients

Job Requirements:

• Degree in civil engineering or geology, certificate in Site Investigation for Supervisors (BCA) is an advantage with 2 years’ relevant experience in major infrastructure projects
• SEC(K) Higher skill will be an advantage
• Physically fit and able to withstand the challenging working conditions
• Strong and determined quality focus with indefatigable determination to get the job done under the most challenging conditions and meet tight deadlines with minimum supervision
• Self-motivated team player with excellent organisational and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Job Description

• Responsible for all on-site technical and engineering matters
• Ensuring works carried out meet company's quality standards & contractual requirements
• Involved in project planning, monitoring project progress and schedule
• To co-ordinate with the client, sub-contractors on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• Assisting Project Manager in monthly progress claims and monthly progress reports.
• Ensuring supervisors & foremen meets client & regulatory work requirements.
• Ensuring Environmental, Safety and Health practices are carried out at all times.

Job Requirements

• Min 3 years in Project planning, coordination is a must.
• Degree in Civil or Structural Engineering recognized by Professional Engineers Board Singapore or Building Construction Authority Singapore is a must.
• Min 3-5 years of Civil Engineering Experience
• Required skill(s): Precast will be preferred.
• Proficient in Microsoft Office
• Organised, meticulous with positive work attitude
• Good interpersonal and analytical skills
• BCSS or equivalent
• Able to start work on short notice
• Candidates will also be considered for Project Engineer (Planning- Civil Engineering) position based on education level and working experience.

Job Description

• Responsible for all on-site technical and engineering matters
• Ensuring works carried out meet company's quality standards & contractual requirements
• Involved in project planning, monitoring project progress and schedule
• To co-ordinate with the client, sub-contractors on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• Assisting Project Manager in monthly progress claims and monthly progress reports.
• Ensuring supervisors & foremen meets client & regulatory work requirements.
• Ensuring Environmental, Safety and Health practices are carried out at all times.

Job Requirements

• Min 3 years in Project planning, coordination is a must.
• Degree in Civil or Structural Engineering recognized by Professional Engineers Board Singapore or Building Construction Authority Singapore is a must.
• Min 3-5 years of Civil Engineering Experience
• Required skill(s): Precast will be preferred.
• Proficient in Microsoft Office
• Organised, meticulous with positive work attitude
• Good interpersonal and analytical skills
• BCSS or equivalent
• Able to start work on short notice
• Candidates will also be considered for Project Engineer (Planning- Civil Engineering) position based on education level and working experience.

Responsibilities:

Project Planning & Coordination

• Collaborate with project managers to define project scope, goals, and deliverables.
• Develop detailed project plans, including timelines, budgets, and resource allocation.
• Coordinate with internal teams and external stakeholders to align on project requirements.

Technical Oversight

• Review and interpret technical drawings, specifications and contracts.
• Provide engineering solutions to technical challenges and ensure compliance with industry standards.
• Oversee procurement and ensure materials meet project specifications.

Take-Off and Budget Management

• Prepare accurate Bills of Quantities (BQ) and cost estimates for projects.
• Conduct quantity take-offs from technical drawings and specifications.
• Monitor project costs, manage budgets and implement cost control measures to minimize overruns.

Tendering Assistance

• Support the tendering process by preparing bid documents, reviewing contractor bids, and evaluating technical and financial submissions.
• Assist in drafting and reviewing contracts and agreements.
• Work closely with procurement teams to ensure alignment with project goals and timelines.

Project Execution

• Monitor project progress, ensuring adherence to quality standards, timelines, and budgets.
• Manage changes to the project scope, schedule, and costs through appropriate processes.
• Conduct site visits to oversee construction, installations, or implementations as required.

Communication & Reporting

• Act as the point of contact between clients, contractors, and other stakeholders.
• Prepare and present regular progress reports, technical updates, and cost analyses.
• Address and resolve project-related issues and conflicts.

Risk Management

• Identify potential project risks and develop mitigation plans.
• Ensure safety protocols and compliance with environmental regulations.

Requirements:

• Bachelor’s degree in Engineering (Civil, Mechanical, Electrical, or related field).
• Preferable 3 years experience in project management or engineering roles in oil and gas industry.
• Strong knowledge of engineering principles, budget control, and tendering processes.
• Excellent communication, problem-solving and leadership skills.
• Proficiency in project management software (e.g., MS Project, Primavera), Excel Worksheet, Word Document, Power Point Presentation, AutoCAD, cost estimation tools and BQ preparation software.
• Experience in tender evaluation and contract management.
• Strong organizational and multitasking abilities.
• Wiling to work at project sites and may require extended hours to meet deadlines.
• This role is well-suited for a detail-oriented professional with expertise in project costing, budget management, and tendering who is passionate about engineering project delivery.

• 5 days, MNC, Boon Lay, transport provided (2 ways)
• Salary: $4000 - $4800, 1mth AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186