Responsibilities

Mechanical

• Prepares list of daily job activities and provide clear job instructions before delegating the jobs to subordinates.
• Supervises job coordination, monitor conformity towards quality, environmental and safety management system policies and procedure.
• Monitors and ensure all mechanical works are carried out according to the latest revision mechanical drawing and complies with contract specification, class requirements and quality management system.
• Arranges coordinate and carry out all the inspection inspections and testing with customer representative and / or classification surveyor as per the Inspection and Test Plan (ITP).
• Performs material equipment incoming are as per Vendor document;
• Verifies tools and equipment used are as per procedures;
• Familiarizes with mechanical inspection process;
• Verifies NDT are done as per approved NDT plan & procedures.
• Verifies preservation are being performed as per preservation plan & procedures.
• Monitors the progress of work and report the status of completion of the official inspections such as accepted, rejected, postponed or cancelled to the respective project manager.
• Prepares review and document inspection records, certificates and NDT reports for the submission to relevant party.
• Checks and endorse inspection record prior to issue to customers.
• Ensures subordinates comply with company’s procedure and work instructions.
• Reports any non-conformance (NC) and issue corrective action request (CAR), where necessary.
• Ensures response timing for NC/CAR are within acceptance period;
• Ensures close-out response for NC/CAR is of sound reasoning and evidence.
• Maintains good relationship with the customers as to full fill part of company’s core value to ensure customer satisfaction.
• Implements and compile the monthly key performance indicators (KPI) related to mechanical.
• Verifies mechanical MDR is as per construction prior to release the product back to Singapore.
• Conducts and participate in audit.

Dimension Controller

• Implements dimensional control methods and procedures throughout the fabrication and integration process of the modules to meet the requirements of project specifications and codes.
• Conducts dimensional checking using latest electronic total stations before and after welding of the main deck frame and main column of the modules to ensure that the dimensions are within specifications.
• Reviews design drawings, do necessary best fit calculations, prepare professional dimensional control reports using AutoCAD and get approval by the clients and/or certifying authority.
• Maintains dimensional survey equipment and keep proper documentation of dimensional control reports to meet project requirements and QA/QC audit standards.
• Gives guidance and advice to sub-contractors on how they can increase their productivity.
• Liaises with key stakeholders including Client on the dimensional control methods, acceptance criteria in accordance to project requirements.
• Prepares and compile final dimensional control survey reports as part of the final documentation report.

Electrical

• Takes charge of projects, coordinate and carry out all E& I QA/QC activities for the projects including hazardous zone equipment’s inspection (ATEX/CompEx/IECEx Certified).
• Review and evaluate the drawings as per Classification Societies and Client’s requirement.
• Prepares the QA procedures and get it approved with Classification Societies and Client.
• Witness the testing of HV/LV circuit breaker/starter, neutral earthing resister/fuses and cable megger-ing.
• Coordinates all termination inspection of electrical installation of equipment.
• Preparations of electrical or mechanical completion for equipment.
• Carries out the inspection and testing with Class Surveyors and Class Representatives.
• Ensures all quality control documents are compiled and information’s are handed over for as-build.
• Coordinates daily job activities and provide clear job instructions before delegating the jobs to subordinates.
• Monitors and ensure all work is carried out according to the latest revision electrical drawing and complies with contract specifications, Class requirements and Quality Management System procedures.
• Checks and endorse inspection record prior to issue to Client.
• Ensures subordinates comply with Company’s procedure and work instruction
• Reports any non-conformance (NC) and issue Corrective Action Request (CAR), where necessary.
• Ensures response timing for NC/CAR are within acceptance period;
• Ensures close-out response for NC/CAR is of sound reasoning and evidence.
• Coordinates with yard QA/QC team for all Quality documentation submission to SCM with the construction completion.
• Maintains good relationship with the customers as to full fill part of company’s core value to ensure customer satisfaction.
• Implements and compile the monthly Key Performance Indicators (KPI) related to electrical and instrumentation.
• Verifies electrical and instrumentation MDR is as per construction prior to release the product back to Singapore.
• Conducts and participate in audit.
• Performs others duties as signed by the superior(s) from time-to-time.

Coating

• Goods knowledge of all international surface preparation standards, painting/coating application standards, inspection standards, contract, specifications, material technical data sheet, material safety data sheet, documentation etc.
• Witness prequalification of painting system, painter, blaster and adhesion testing subjected for project approval before commencement of painting activities.
• Coordinates in-coming coating materials (e.g. paints, thinners, abrasives etc) conditions, data sheet and batch certificates in accordance with project.
• Inspects correct type of blasting equipment and tools to be used to meet the paint quality according to the paint specification.
• Inspects pre-cleaning or solvent cleaning of surface, metal surface imperfection/defects, surface profile of blast cleaned surface using right inspection tools.
• Assesses surface cleanliness soluble salt contamination on blast-cleaned surface and related test such as pull-off test & reports.
• Able to handle painting inspections in blasting and painting inspection of tank coatings, ship hull painting, and structural items
• Coordinates Request for inspection (RFI) to third party and client paint inspectors on hold point and witness point as per project inspection test plan (ITP).
• ·Able to send enquiries to Paint manufacturers for Painting Specification in accordance with project Requirements and Secure Quality document for painting; Inspection & Test plan, blasting and coating procedure.
• Ensures calibration certificates of painting instruments are valid & available for reference
• Supervises the workplace and workers safety.
• Ensures coating is practical and in accordance with the specified requirements by preparing or reviewing drawings, specification, job instruction and material selection notes etc.
• Reviews Inspection Test Plan (ITP) as per project specification and procedures
• Coordinates and perform Coating inspection of structural, piping and outfit works etc. of the assigned project as per approved ITP.
• To monitor all painting/coating related works and ensure all final products meet project specification requirement.
• Conducts surveillance inspection of surface preparation, paint mixing, WFT, DFT adhesion and curing of paints.
• Coordinates with yard QA/QC team for all quality documentation submission to SCM with the construction completion.
• Conducts onsite audit as per relevant specification and customer requirement.

Structural

• Takes charge of project and carry out all QA functions for the assigned project.
• Prepares list of daily job activities and provide clear job instructions before delegating the jobs to subordinates.
• Supervises job coordination, monitor conformity towards quality, environmental and safety management system policies and procedure.
• Monitors and ensure all piping works are carried out according to the latest revision piping drawing and complies with contract specification, class requirements and quality management system.
• Coordinates all the inspections and testing with customer representative and / or classification surveyor as per the Inspection and Test Plan (ITP).
• Materials verification done with the specified mill certificates and codes;
• PMI testing on incoming, welder material;
• Verifies material use on sites are approved project materials;
• Familiarizes with piping inspection process;
• Verifies NDT are done as per approved NDT plan & procedures.
• Monitors the progress of work and report the status of completion of the official inspections such as accepted, rejected, postponed or cancelled to the respective project manager.
• Ensures project documents including inspection, traceability records, certificates, radiography films, and NDT reports are submitted to relevant party to signing.
• Checks and endorse inspection record prior to issue to customers.
• Ensures subordinates comply with company’s procedure and work instructions.
• Reports any non-conformance (NC) and issue corrective action request (CAR), where necessary.
• Ensures response timing for NC/CAR are within acceptance period;
• Ensures close-out response for NC/CAR is of sound reasoning and evidence.
• Coordinates with yard QA/QC team for all Quality documentation submission to SCM with the construction completion.
• Implements and compile the monthly key performance indicators (KPI) related to piping.
• Verifies piping MDR is as per construction prior to release the product back to Singapore.
• Conducts and participate in audit.
• Performs others duties as signed by the superior(s) from time-to-time.

Requirements

• Degree or Diploma in Mechanical Engineering / Marine and Offshore or equivalent.
• Minimum 5 years of relevant work experiences in shipbuilding / oil and gas / offshore projects as QA/QC Structural Inspector.
• Working in FPSO/FSO/FPU Project will be added advantage.
• Shall be familiar with AWS D1.1, API 2X, ASME Section II, and ABS Class rules.
• Certified Welding Inspector (AWS CWI or CSWIP 3.1)
• NDT Level II in RT/UT/MPI/PT

Our Address and Working Hours:

Seatrium Limited

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Fri: 8am - 5:30pm

Seatrium Limited

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 7:30am - 5:15pm

Fri: 7:30am - 4:15pm

Seatrium Limited

(Pioneer Yard)

50 Gul Road, Singapore 629353

(Islandwide transport provided)

Mon - Fri: 7:30am - 5:30pm

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Fri: 7:30am - 5:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Ltd and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

1. Diploma or above, major in marketing and business management is preferred.

2. Have more than 2 years working experience in market development or sales. Familiar with medical equipment, aviation equipment and semiconductor equipment industry is preferred.

3. Proficient in English, with good communication and negotiation skills.

4. Be familiar with the Singapore market and understand the local business culture and consumption habits.

5. Have strong market analysis and judgment ability, and be able to formulate effective market development strategies.

6. Have good team spirit and ability to work independently.

7. Be able to adapt to business trip and work pressure, and have strong self-drive and sense of achieving goals.

8. Skillful use of office software and sales tools.

Responsibilities of marketing salesman:

1. Be responsible for investigating Singapore market and global market, collecting and analyzing market information and competing products.

2. Develop Singapore and global customer resources, establish and maintain good customer relationships.

3. Formulate and implement the market development plan and achieve the sales target.

4. Promote the company's products or services, and enhance the brand's popularity and influence in the Singapore market.

5. Coordinate internal and external resources to ensure the smooth progress of the project and meet customer needs.

6. Feedback the market dynamics and customer demand in time, and provide a basis for the company's strategic adjustment.

If you are interested in this job, please contact Mr.Ning @ [email protected] ASAP.

Our client is a distributor of automotive and industrial solutions.

• Manage and configure infrastructure systems and applications, network devices, desktops, mobile devices, and remote devices.
• Ensure automatic system backups, successful execution of recovery and disaster recovery plans, application of patches, and closely monitor system resource usage.
• Collaborate with external vendors to ensure compliance with Service Level Agreements (SLA).
• Research and source products, solutions, and vendors for ongoing projects.

Requirements:

• Diploma in Computer Science/Information Technology or equivalent.
• At least 2 years of relevant working experience.
• Skilled in enterprise networking, with expertise in WAN, LAN, and VPN optimization, implementation, and support.
• Knowledgeable about Alcatel PABX, FortiGate devices, Cisco Systems, and Unifi Wireless AP Controllers.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

We are seeking a skilled and experienced Deployment Engineer to join our dynamic IT team. The ideal candidate will have extensive experience with hypervisors, network infrastructure, and system services, with a strong focus on deployment and implementation. This role requires a proactive individual who can manage and optimize our IT environment to ensure smooth and efficient deployments.

REQUIRED SKILL SET and RESPONSIBILITIES:

· Plan, coordinate, and execute the deployment of virtual environments using vSphere, Nutanix, and Hyper-V.

· Ensure seamless integration and deployment of network switches, firewalls, and storage solutions.

· Implement and manage deployment processes for system services such as Active Directory, DHCP, DNS, failover clusters, file servers, and Certificate Authority.

· Configure and manage deployment environments to ensure optimal performance and security.

· Maintain detailed documentation of deployment configurations, processes, and procedures.

· Monitor deployment processes and environments to identify and resolve issues promptly.

· Perform post-deployment validation to ensure systems are functioning as expected.

· Work closely with development, operations, and security teams to ensure successful deployments.

· Communicate deployment status, issues, and resolutions to stakeholders.

· Develop and maintain automation scripts to streamline deployment processes is a plus.

· Utilize tools such as PowerShell, Ansible etc to automate repetitive tasks and ensure consistency is a plus.

Job Requirements:

· Bachelor’s degree in computer science, Information Technology, or a related field.

· Proven experience with hypervisors (vSphere, Nutanix, Hyper-V) and deployment processes.

· Strong knowledge of network switches, firewalls, and storage solutions.

· Hands-on experience with system services such as Active Directory, DHCP, DNS, failover clusters, file servers, and Certificate Authority.

· Proficiency in automation and scripting tools (e.g., PowerShell, Ansible).

· Excellent troubleshooting and problem-solving skills.

· Strong communication and teamwork abilities.

· Relevant certifications (e.g., VMware Certified Professional, Microsoft Certified: Azure Solutions Architect, Nutanix) are a plus.

Main Duties:

• Involves in all aspects relating to the Tender, Design and Construction Management of all types of Civil and Structural Systems for Industrial Facilities Buildings.
• In-charge of the design of Concrete and Steel Structures.
• Assists Project Managers in achieving project completion within budget and on schedule and quality.
• Prepares, Issues and Evaluates Tender packages.
• Coordinates with Architectural and Process, Mechanical, Electrical disciplines, and Quantity surveyors.
• Address site issues related to design.
• Liaises with Consultants and sub-contractors.
• Provides direction and coaching to other junior team members.
• Manages timely submission and approvals from local authorities.
• Mentoring Civil & Structural engineers during tendering, design and construction phase based on best practices defined in the engineering efficiency checklist.
• Other Duties:
• Responsible for ensuring to remain familiar with current practices and engineering trends within the industry and remain technically competent.
• Ad hoc duties as determined by management.

Qualifications:

• Degree in Civil/Structural Engineering; master’s degree in Structural Engineering preferred
• Diploma holders with additional 2 - 3 years’ experience unless equated with professional certifications.
• 6 - 8 years of Design and Construction experience
• 1 - 2 years additional experience for each higher grade of progression

Types of Experience:

• Design and Construction experience preferably in industrial buildings with Precast and Long span roof trusses experiences.
• Site experience on piling works, Sub-structure and Super structure works for reinforce concrete and Steel structures and Precast structures.
• Experience working closely with Process, Mechanical and Electrical disciplines, and Quantity surveyor.
• Experience of liaising with consultants and contractors.
• Experience with checking of shop drawings for Precast and steel structures and able to do detailed Design and work in a team and able to provide details for cad.
• Able to do Tender / preliminary Design, Detailed Design, Preparation and Managing the subcontract tender packages and lead the team of Engineers and Computer Aided Design
• Conversant with the Local Authorities requirements for Civil and Structural submissions
• Conversing with other country codes is preferable.
• Willing to travel, if required

Job Description

• Industry/ Organization Type: Precision Engineering
• Position Title: Maintenance Engineer
• Working Location: Bukit Batok
• Working Hours: 5 days (Mon – Fri, 8.00am – 5.30pm)
• Salary Package: Basic salary up to $3,000 + Variable Bonus + OT
• Duration: Permanent Role

Key Responsibilities

• Create and execute regular maintenance plans for all machinery and equipment.
• Identify and fix issues with mechanical, electrical, and pneumatic systems in CNC machines and other equipment.
• Help with setting up and starting new equipment.
• Keep detailed records of all maintenance work, including logs, reports, and manuals.
• Follow all health and safety rules and foster a safe workplace.
• Spot areas for improvement and introduce changes to better equipment efficiency and reliability.
• Manage spare parts inventory and handle ordering as required.
• Cooperate closely with production, quality, and engineering teams to meet operational objectives.

APPLY NOW!!!

• Bachelor's degree or Diploma in Electrical or Mechanical Engineering or related field.
• 3-5 years in maintenance engineering in related field
• Good understanding of CNC machines (Fanuc control) and PLC programming.
• Experienced with AUTOCAD and Microsoft Office Suite.
• Willingness to work outside regular hours if necessary

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67933 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Validation Engineer
• Working Location: Tai Seng
• Working Hours: 5 days (Monday to Friday, 8.30 AM – 6 PM)
• Salary Package: Basic Salary up to $6,000 + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Assist Quality and Validation Manager Asia to complete the tasks on time with good quality.
• Responsible for the successful execution of the Validation functions for customer projects, as required – Quality, Cost, and Time.
• Responsible for driving and supporting the project team for projects where validation is required and ensuring execution complies with company's standards.
• Provide training on qualification activities.
• Responsible for maintaining qualification documentation standards and procedures.
• Create and maintain qualification/validation documentation from the design phase of projects for mechanical, software, and hardware parts.
• Lead the qualification/validation activities of projects (risk analysis, protocol drafting, and test execution during FAT/SAT) internally and at our partners' sites (approximately 20% of the time on travel throughout the year).
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent
• Has 2 years of working experience in quality or validation of automated systems (mechanical, software, hardware) or equivalent
• Prior work experience in control systems design is advantageous
• Excellent understanding of assembly, test & debug procedures

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69403 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Your Company

We are a future forward advanced mechanical precision manufacturing company with an outstanding & proven track record for innovation, agility, growth & stability. We are poised for our next phase of growth in the semi-conductor, medical, oil & gas, aerospace, automotive & optics sectors. Our team is rapidly expanding to fill the next generation leadership roles & advance our current operational capabilities.

Your Role

As our Sales Engineer, you will play a vital role in the company’s revenue growth through obtaining new sales from existing and new customers, as well as maintaining strong business relationship with customers.

Your Calling

· Plan and carry out sales activities (quotation, price negotiation, delivery, etc.)

· Exploring new potential customers and obtain new businesses

· Execute sales and marketing strategies to improve/increase sales revenue

· Liaise with customers and address their feedbacks/issues

· Establish and maintain strong business relationships with existing and potential customers

· Provide sales and technical/engineering support to customers

· Prepare and deliver technical presentation to explain and promote company’s services

· Keep track of orders and ensure timely delivery

· Monitoring competition by gathering current market information on pricing, delivery lead time etc.

· Any other ad-hoc duties as assigned

Your Success Factors

· Min. ITE in Precision/Manufacturing Engineering or similar field

· Able to read and interpret technical drawings

· Experience in Precision Engineering or related field advantageous

· Have experience in using ERP Systems advantageous

· Outgoing personality with strong interpersonal and communication skills

· Initiative and results driven

· Entry level candidate are welcome

Summary:

Co-ordinate with respective factory teams including CLS Tech Support, CLS Production, HPE Procurement, Material team, HPE Product Engineering team, Test team etc. to ensure all area of focus are well prepared and ready for factory inspection.

Detailed Description:

Performs tasks such as, but not limited to, the following:

• Prepare product sample for agency inspection.
• Perform internal product compliance audits.
• Verify relevant documentation revision and content.
• Prepare and host Factory tour (Incoming Inspection/Production Lines/Finished Products/Lab/Testing areas) with auditor/HPE representative.
• Coordinate product safety factory inspection with relevant engineers (Test/PE/Procurement) and Production to ensure compliance to applicable HPE standards and product regulatory requirements.
• Pursue Supplier CoC availability by purchased batches as “verification of purchased parts” for critical component materials from relevant Proc Engr (e.g. power supply/ PCB/ plastic materials/ batteries/labels) that is requested by the agency auditor.
• Traceability of manufacturer and flame rating for incoming material e.g. plastic material/PCB used in products.
• Keep in touch with relevant Global Product Regulatory team to track and understand the updates to requirements.
• Report any regulatory changes/escalation to management and inform applicable departments.
• Track and maintain the latest version certificates and test reports from the certification body.
• Ensures that the processes are carried out and comply with the specifications required by customers and that it complies with the local requirements of the organization and the requirements of MPS (Manufacturing Process Standards)
• Ensures that the specifications, the acceptance criteria of the products by the operational staff are known and respected; ensures that operators comply with product quality inspection procedures in accordance with customer requirements
• Provides support in order to optimize processes, identifies and initiates opportunities to reduce costs
• Prepares and collects data from the key points of the processes and prepares the internal quality reports
• Monitors product yields, process (yield) and scrap rate (scrap) or other quality indicators
• Participates in the activities of PFMEA, 8D analysis and elaboration of Control Plan
• Assesses and updates working instructions for specific products

Requirements:

• Bachelor's Degree in relevant fields
• 4 to 6 years relevant experience
• Strong knowledge in manufacturing operations Understand quality tools such as FMEA, PMP, SPC, 8D methodology, etc
• Good understanding and familiarity with safety regulations such as UL, CSA, TUV, CCC and standards (60950-1, 62368-1), China standard GB 4943.1, GB 9254.1, GB 17625.1
• Good understanding in ISO 9001:2015 Quality Management System (Certified ISO Internal Auditor Preferred)
• Attention to Detail: Strong attention to detail is crucial for identifying potential safety issues.
• Team Collaboration: Ability to work effectively with cross-functional teams, including design, manufacturing, and quality assurance.
• Technical Knowledge: Understanding of product design, materials, and manufacturing processes, as well as quality and process improvements techniques and tools.
• Problem-Solving Skills: Strong analytical skills to identify potential safety issues and develop solutions.
• Communication: Excellent verbal and written communication skills for reporting and training, effectively communicate with a wide variety of internal and external customers teamwork skills;

OTHER INFO:-

• Work Location: 452 Alexandra Road, Singapore 119961 [Near Labrador Park MRT]
• Working Days / Hours: 8am to 5.30pm / 8.30am to 6pm (Mondays to Fridays)

-----------------------------------------------------------------------------

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).

At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

COMPANY OVERVIEW:
Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.

Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Our vision is to transform how the world uses information to enrich life for all.

Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever.

This position focuses on strategy and modeling creation, improving global standardizations, enable sustainability through automation, synchronizing the processes and scaling the solutions to transform the inline interdiction and operation system automation for RAM Quality and Operation Engineering sections.

Responsibilities:

• Establish and improve BKM (Best Known Method) for RAM quality defense line, sampling methodology, sampling systems and operation efficiency.
• Improve quality and yield performance by reducing defect OOC% variation.
• Keen to learn new skills, initiate proactive and continuous improvement projects, in areas across the Front-End including manufacturing methods and processes, quality, software systems, cycle time, key tool metrics (utilization, and performance efficiency), maintenance and routine tasks, and other manufacturing support operation.
• Establish metrics that can efficiently audit adoption rate and compliance to business process, BKM and strategy and perform audits.
• Perform quality deviation investigations, fab metrics benchmarking analysis and find opportunity for improvements.
• Lead and facilitate discussion to drive network alignment on strategy business process and roadmap to achieve area objectives and deliver to timelines/commitments. Ensure BKM sharing spans across all sites regardless of technology and/or site mission differences.
• Actively provide recommendations to improve and optimize programs and processes to the respective program and/or process owners.
• Provide tactical support and coordination for the Fabs for issues of People, Safety, Yield, Quality, Cost, and Cycle Time when required.

Qualifications & Skills:

• Good communication skill, maintain a strong and open relationship with peer group and appropriate team members in other functional areas such as Process Integration Engineering, Quality Systems, Production Operations Management and present strategy and updates to network members and leaders.
• Proficient in project management with good resource planning, status monitoring and deliver timely results.
• Promote worldwide sharing and transfer of area-specific knowledge.
• Proficiency, experience, and knowledge relating to product and test wafer capacity modeling, wafer at risk modeling, Failure Mode Effect Analysis (FMEA) concept and system, defect analysis tools, sampling strategy and systems, Statistical Process Control (SPC) tools, Cycle Time Management, tableau creation, SQL and Programming language and Organizational Change have advantage.

Education and Experience:

• Masters/bachelor’s in engineering
• Relevant working experiences in RDA and/or Metrology
• Willing and capable of international travel, including Extended International Business Travel (EIBT) assignment to 6 months as needed, to accomplish the goals.

Maximizes yield by working on tools, the process, or wafer fabrication recipes. Troubleshoots wafer fabrication problems and performs root cause analysis. Works with other process areas to understand and control process deviations. Long-term investigation of defect issues may require extensive work with shift engineering and other functional areas. Evaluates products to ensure they meet the required design and performance specifications. Conducts research to assess process adjustment requirements and recommends process improvements or equipment changes needed to efficiently manufacture new product or part types.

Job Description

• Industry/ Organization Type: Building & Construction
• Position Title: Site Engineer
• Working Location: Pioneer
• Working Hours: 5.5 working days (Mon to Fri 8 AM – 5 PM, Sat half day)
• Salary Package: Basic Salary up to $6,500 + AWS + Variable Bonus + Transport Allowance
• Duration: Permanent

Key Responsibilities

• Handle daily construction activities, ensuring works progress according to the project schedule, design, and safety standards.
• Provide technical support and guidance to construction workers, subcontractors, and other engineers on-site.
• Ensure that construction methods and materials used meet project specifications and quality standards.
• Coordinate with project managers, contractors, and other team members to ensure smooth and successful execution of the project.
• Conduct regular inspections of construction activities to ensure the quality of work meets industry standards and the specific requirements of the project.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Minimum Diploma in Civil Engineering or related qualification
• Has experience with the Land Transport Authority (LTA), Strategic Planning Policy Group (SPPG), or Defence Science and Technology Agency (DSTA)
• Prior experience with road and airfield runway construction and resurfacing is required
• Proficient in MS Office
• A class 3 driving license is required

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69580 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/Organization Type: Supply of Environmental Systems
• Position Title: Sales & Project Engineer
• Working Location: Boon Lay
• Working Hours: Monday – Friday, 8.45 AM – 6.15 PM
• Salary Package: Basic Salary up to $4,500 + HP Allowance + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Achieve individual sales target by conducting the full sales cycle of lead generation, follow-up, service delivery and closure of transaction.
• Detail work includes managing and understanding clients’ requirements and assessing equipment needs, preparing and delivering sales proposals, technical presentations.
• Maintain relationships with suppliers and stakeholders.
• Provide continuous after-sales support such as aiding clients to identify problems with installed equipment (if any), recommending improved material, machinery or parts for replacement and maintenance.
• Direct and monitor daily activities to align the project progress and quality goals.
• Implement and adhere to the sales plan set by the manager with the aim of expanding the company’s customer base.
• Collaborate with team to compile information for tender submissions.
• Actively enhance personal knowledge of supplier’s products to introduce technology that adds value to the clients.
• Evaluate sales activities with the management weekly, including the status of prospective customers, plans to meet sales targets and status on deadlines.
• Collaborate with Sales Manager, producing reports regularly to communicate with supplier on sales activities and status of project.

APPLY NOW!!!

• Minimum Diploma in any engineering field.
• Candidates with at least 1 year of Sales experience will be advantageous.
• Candidates without experience are welcome to apply as training will be provided.
• With prior experience with tender systems such as Gebiz
• With Class 3 Driving License.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69796 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• To drive maintenance activities to maintain high efficiency of the equipment and minimise machine downtime as per KPI.
• To lead troubleshooting and root cause analysis of machine delays especially on mechanical faults.
• To develop and implement maintenance plans on all equipment to minimise downtime.
• To monitor cost as per KPI, maintain inventory of spares, liase with vendors and partners and to coordinate activities with other departments to ensure efficient operation.
• To develop, plan and implement automation projects to improve machine safety, reduce human intervention and maximise productivity.

Job Requirements

• Bachelor Degree in Mechanical / Electrical Engineering or equivalent studies
• Minimum 2 years in the maintenance field
• Experienced in automation, mechanical & electrical maintenance in a manufactoring environment
• Safety conscious
• Able to work in a hot and dusty environment

The DDI specialist we're seeking will lead the design, deployment, and management of regional DNS, DHCP, and IP Address Management (DDI) infrastructure for a leading global bank. The specialist will act as a point of escalation for the Network Operations team, providing expert support to resolve complex issues and ensure smooth operations.

Responsibilities:

• Manage the regional DDI (DNS, DHCP, IP Address Management) infrastructure.
• Plan and execute the deployment of DDI solutions, ensuring seamless integration with existing network infrastructure.
• Serve as a point of escalation for the Network Operations team, providing expert-level support and troubleshooting assistance.

Experience required:

• Experience with DDI solutions, strong preference for Bluecat or alternatively Infoblox.
• Strong knowledge of DNS, DHCP, and IP Address Management principles and protocols.
• Experience in configuring and troubleshooting IPAM products in a large scale environment.
• Strong understanding of NTP and PTP
• Exhibit robust comprehension of change management principles.

We regret to inform that only shortlisted candidates will be notified.

EA Reference: Moss Venetia, R1980847

Allegis Group Singapore Pte Ltd, Company Reg No. 200909448N, EA License No. 10C4544

Our client provides advanced instruments and systems designed for high performance across various industries.

• Prepare service and spare parts quotations to customer inquiries.
• Build and maintain strong customer relationships to ensure high-quality service and support.
• Perform in-house repairs and on-site commissioning for gas and water quality analysers, CEMS, and AQMS, troubleshoot issues.
• Collaborate with customers to address service concerns and offer technical solutions.
• Support the project team in conducting FAT and SAT and deliver product training to end users and distributors.

Requirements:

• Degree in Mechanical Engineering/Environmental Science Engineering or equivalent.
• At least 2 years of experience in the analytical instruments.
• Good knowledge of gas analyzers, CEMS, and water quality analyzers.
• Customer-oriented with a positive attitude, along with excellent planning and time management skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• To plan, coordinate and execute quality assurance and quality control of project.
• To ensure all products are executed in accordance to contract specifications.
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control.
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload.
• To conduct QC inspection and record on all the incoming materials.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• To prepare all the Quality-related reports.
• Any other ad-hoc duties as and when assigned

• 7+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

· 5 days’ work week

· Central area near MRT

· Reputable and stable organization

Job Responsibilities:

· Provide pre-sales and post-sales technical support to customers and internal sales team, handling customer NDA and sample request

· Collect customers’ feedback and provide recommendation to customer for design requirements, product enhancements and capture new product opportunities

· Responsible for identifying and clarifying any technical issues related to new or existing products, and clearly communicate findings to the respective business unit

· Hands-on technical support to customers, documenting problems, and suggesting solutions

· Report design, reliability and functional problems to the appropriate groups within company & associate groups and work to solve problems

Requirements:

· Degree in Engineering (Electronics) or equivalent

· 5 years of technical customer support experience in semiconductor industry

· Field experience or hands-on practice or knowledge of multi-disciplinary system design and development

· Knowledge of Smart Card, RFID and microcontroller products; knowledge of physical access control and the security industry is desirable

· Experience with or knowledge of one or more of: CCD, CMOS image sensors, image capture, video standards, image processing

We would like to invite interested applicants to apply.

Thomas Tan

Registration No: 12C6253

License No: R2094900

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

Under the revised Employment Agencies Licence Condition 5(b), employment agencies (EAs) are required to collect the personal data (e.g. NRIC, FIN) of applicants referred to employers for permanent or contract job positions of at least 6 months with a fixed monthly salary of $3,300 and above. PDPA requirements on collection, use and disclosure of personal data are not applicable to EAs that are collecting such information, as it is a regulatory requirement.

https://www.mom.gov.sg/faq/submit-quarterly-referral-and-placement/are-employment-agencies-allowed-to-collect-personal-data

Responsible for organizing and managing project management activities, ensuring that projects are executing smoothly and efficiently against an agreed plan and budget. Handle customer's enquires on the assigned projects and be the primary point of contact between the company and customers. Coordinate the activities of functional departments to support the project.

DUTIES & RESPONSIBILITIES:

- Conduct cost estimation and feasibility study meeting

- Prepare and submit customer final Product Print and components 2D Prin to Document Control

- Organize and chair Advanced Product Quality Planning (APQP) Team meeting

- Establish Process Flow, FMEA, Packaging Specification, Control Plan and Production Information (PPI)

- Prepare Project Schedule and PPI after reviewing with customer

- Work with Tooling Engineer to assign tooling project subcontractor and release Purchase Request

- Lead APQP Team in reviewing Design Concept and preparing the design for manufacturability and Assembly (DFMEA)

- Review design with customer

- Establish Error Proofing, Productivity and Yield

- Monitor and tracking closely on all tool-up progress, tool repair/modification and all drawing updates to ensure schedule compliance

- Submit sample and PPAP report to customer and progress tracking

- Update and release PPI and Process Flow Chart upon PPAP approval

- Conduct hand over meeting

REQUIREMENT:

- Degree / Diploma in Precision Engineering, Mechanical Engineering or Manufacturing Engineering

- Min 3 years experience with basic knowledge in Unigraphics, Solidworks, Molding & Tool making

Our client is a leading player in Manufacturing industry. Due to business needs, they are now recruiting a Logistics Coordinator to be part of their Logistics Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of Logistics Coordinator:

• Ensure accurate and timely documentation for all incoming and outgoing shipments.
• Update and maintain material movement records in the system and ensure inventory accuracy.
• Collaborate with warehouse and internal departments to align on requirements and priorities.
• Perform timely transactions in the SAP system and archive all related documents.
• Manage the purchase of indirect materials and generate weekly/monthly stock count sheets.
• Liaise with freight forwarders, arrange local deliveries, and handle RMA documentation.
• Maintain departmental safety and cleanliness standards.
• Contribute to process improvement initiatives and perform additional duties as assigned by the Logistics Manager.

Requirements:

• Relevant logistics experience

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

• Manage daily accounting and costing tasks.
• Follow SOPs for AR and AP processes with accurate data entry.
• Handle purchase orders, verify goods, process invoices, and manage payments.
• Reconcile shipment records, issue tax invoices, and update accounts.
• Perform manual adjustments and manage fixed assets as directed.
• Resolve discrepancies with vendors, teams, and banks, obtaining approval for adjustments.
• Manually compile costing data during machine breakdowns.
• Prepare audit schedules and assist with audit activities.
• Support data compilation and analysis for management and auditor reports.

Requirements:

• Diploma in Accounting, Business Administration, or related field.
• At least 1 year of Accounts Payable (AP) experience.
• Basic understanding of AP, AR, and General Ledger (GL).
• Familiar with Microsoft Excel & SAP.
• Detail-oriented and organized.
• Able to work under pressure and meet deadlines.
• Resilient in handling complex tasks and tight schedules.

Wecruit Pte Ltd | 20C0270

Tew Jie Wei | R22106822

Job Descriptions:

• To ensure all the maintenance works carried out systematically, efficiently & safely.
• By improving existing preventive maintenance system thus reduce maintenance cost and improve performance of equipment.
• To be the initiator and coordinator of MOC for any addition, modification and replacement in the system.
• To assist the Section Manager and Supervisor to co-ordinate and supervise the day to day activities.
• To troubleshoot Mechanical Equipment / Systems’ problems when it runs abnormally malfunction.
• To work closely with the operation team for daily, weekly and monthly maintenance programmed to maintain all equipment running efficiently, safely and smoothly.
• To train all technician and staffs on equipment maintenance and monitor the 5S and TPM activities carried out in the section.
• To assist the Section Manager to propose and implement action plans to rectify faults occurring in the system/processes.
• To be involved in new project management time to time and be responsible for document preparation and other paper works, as well as co-ordination with contractors & Vendors.
• To manage all Mechanical & electrical Instruments spare parts and tools.

Job Requirements:

• Bachelor Degree in Mechanical Engineering
• Self-motivated, able to work independently and with a team to completion of tasks

Remuneration:

• Working hours - Monday to Friday: 8am to 5pm ,Alternate Saturday: 8am to 5pm
• Company Transport / Transport Allowance $120 if possess own transport
• AWS
• Performance Bonus
• Medical Benefits
• Sign-on Bonus

• Responsible for all on-site technical and engineering matters
• Ensuring works carried out meet company's quality standards &contractual requirements
• Involved in project planning, monitoring project progress and schedule
• To co-ordinate with the client, sub-contractors on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• Assisting Project Manager in monthly progress claims and monthly progress reports.
• Ensuring supervisors & foremen meets client &regulatory work requirements.
• Ensuring Environmental, Safety and Health practices are carried out at all times.

Job Requirements

• Min 3 years in precast work planning, coordination is a must.
• Degree in Civil or Structural Engineering recognized by Professional Engineers Board Singapore or Building Construction Authority Singapore is a must.
• Min 3-5 years of Civil Engineering Experience
• Required skill(s): Precast will be preferred.
• Proficient in Microsoft Office
• Organised, meticulous with positive work attitude
• Good interpersonal and analytical skills
• BCSS or equivalent
• Able to start work on short notice
• Candidates will also be considered for Project Engineer (Planning- Civil Engineering) position based on education level and working experience.

• Designing and implementing new network solutions and/or improving the efficiency of current networks
• Installing, configuring and supporting network equipment including routers, proxy servers, switches, WAN accelerators, DNS and DHCP
• Procuring network equipment and managing subcontractors involved with network installation
• Configuring firewalls,routing and switching to maximise network efficiency and security
• Maximising network performance through ongoing monitoring and troubleshooting
• Arranging scheduled upgrades
• Investigating faults in the network
• Updating network equipment to the latest firmware releases
• Reporting network status to key stakeholders
• An analytical mind
• An ability to learn new technologies quickly
• Good time management skills
• An ability to follow processes
• Strong documentation skills
• Good communication skills –both written and verbal
• Commercial and business awareness