• Design the power supply system according to P&ID, equipment list and instrument list to meet the requirement of specification
• Calculate and select equipment, component, cable and wire to meet the requirement of specification
• Develop cost estimates for electrical products and electrical works, inclusion of scheduling electrical works.
• Integrate with plant design engineer to develop electrical equipment and cable/ wire layout
• Discuss and develop the control system with sub-contractor based on internal design data, e.g. P&ID and control logic
• Perform installation and testing and commissioning of electrical system.
• Work on site and with clients and other stakeholders.
• Project coordination, ensure project is on schedule and is running smoothly.
• Handles technical matter on the site.
• Other duties as assigned.

Requirement:

• Diploma / Degree in electrical engineering or any other equivalent
• 2 Years of relevant working experience
• Good understanding on Singapore electrical codes and requirements
• Familiar with PLC (Siemens, AB, Mitsubishi, etc.)
• Familiar with the electrical construction specification requirements and safety specification requirements on the project site
• Understand the knowledge of power supply and distribution
• Able to discuss electrical technology with customers or contractors independently
• Experience in AutoCAD, Microsoft office software will be added advantages

Interested candidate please send a copy of your updated resume to [email protected]

HR in-charge: KC Cheah

- supervise Plumbing & Sanitary installation works

- resolve engineering issues

- attend meetings with supplier, sub contractor, main contractor, consultant, and authority

- submit reports

- attend inspections with supplier, sub contractor, main contractor, consultant, and authority

- prepare progress claim to main contractor / client & attend meetings

- prepare & certify progress claims of sub contractor & suppliers

Job Description

• Engage in assessment, planning, design, and implementation of core network solutions, focusing on data engineering, including routing/switching, security (Checkpoint, Palo Alto, Fortinet), Wireless/RF (Cisco, Aruba), micro-segmentation (ISE/Clearpass), SD-WAN, Data Center SDA (ACI/NSX), and automation (Ansible, Python).
• Design, deploy, document, and support medium to large-scale network projects.
• Work with cutting-edge technologies and support network migrations involving Cisco Cat 9000, Nexus, ISR, and ASR routers.
• Develop high-level and low-level designs for new builds and data center/site migrations.
• Execute migration plans within scheduled windows, including after-hours and weekends.

Qualifications

• 5–8 years of experience in financial or telecom industries with expertise in network design and implementation with hands-on experience with Arista Networks solutions.
• Proven expertise in Data Center networking, including design, implementation, and optimization.
• Proficient in routing protocols (BGP, EIGRP, OSPF) and WAN technologies (MPLS/VPLS).
• Strong experience in complex data, voice, video, and WLAN network environments.
• Broad knowledge of DHCP/DNS, TACACS/RADIUS, and VPN preferred.

We regret to inform that only shortlisted candidates will be informed.

EA Registration No.: R1658484, Amita Raj

Allegis Group Singapore Pte Ltd, Company Reg No. 200909448N, EA License No. 10C4544

Key Responsibilities:

1. Data Pipeline Development:Design, build, and maintain scalable ETL/ELT pipelines to extract, transform, and load data from diverse sources.
   Automate data ingestion and processing workflows.
   
2. Data Architecture and Storage:Develop and optimize data models and databases (e.g., relational, NoSQL, or data lakes).
   Implement and manage cloud-based data storage solutions (e.g., AWS, Azure, Google Cloud).
   
3. Data Integration and Transformation:Integrate data from various structured and unstructured sources, including APIs and third-party systems.
   Ensure data quality, consistency, and accuracy through validation processes.
   
4. Performance and Scalability:Monitor, troubleshoot, and improve the performance of data systems and pipelines.
   Optimize storage and processing costs for large-scale datasets.
   
5. Collaboration and Support:Work closely with data scientists, analysts, and other stakeholders to understand their data needs.
   Provide technical guidance on best practices for data infrastructure.
   
6. Security and Compliance:Implement data governance, security protocols, and access controls.
   Ensure compliance with relevant data privacy regulations (e.g., GDPR, CCPA).
   

Qualifications:

1. Education and Experience:Bachelor’s or Master’s degree in Computer Science, Engineering, or a related field.
   Proven experience in a data engineering role (2–5 years preferred).
   
2. Technical Skills:Proficiency in programming languages like Python, Scala, or Java.
   Experience with SQL and database management systems (e.g., MySQL, PostgreSQL).
   Hands-on experience with big data frameworks (e.g., Apache Spark, Hadoop).
   Familiarity with cloud platforms (AWS, Azure, GCP) and services like S3, Redshift, BigQuery, or Databricks.
   Knowledge of data integration tools (e.g., Apache Airflow, Kafka, or Glue).
   
3. Other Skills:Strong problem-solving and debugging abilities.
   Excellent communication and teamwork skills.
   Ability to manage multiple projects and deadlines.
   

Preferred Qualifications:

• Experience with machine learning pipelines and MLOps.
• Knowledge of containerization and orchestration (e.g., Docker, Kubernetes).
• Familiarity with CI/CD processes for data workflows.

• To manage and accountable for project deliverable as per contract requirement, company processes and to lead a team of Site Supervisor, Company Technician & Subcontractors to achieve the set objective.
• Develop comprehensive project management plan including scheduling, resource - and capacity planning and quality assurance.
• Accountable for Safety Implementation on site as per Schindler Standards and lead as role Model in exhibiting Safety Policies and Schindler Value.
• Accountable for P&L for all jobs under the portfolio.
• Plan and schedule work for supervisor and company technician and ensure optimum usage of available resources.
• Responsible for negotiation with subcon and vendors along with P&L to achieve business Profitability.
• Effective documentation and record Maintainace for all jobs with respect to external and internal communication.
• Manage project related tasks to achieve the project objectives on time and within the cost target by strictly enforcing quality, safety, and customer satisfaction throughout the entire duration of the project.
• Assure effective project management, smooth and timely communication with all parties involved, particularly with the representatives of the customer to meet or exceed his expectations.
• Look for favorable opportunities &Sell variation orders timely to reach financial objectives.
• Provide regular project management reports and Project operational and financial status to head of commodity and Present WIP status to Management Monthly.
• Influence the customer for Payment Certification and collection of payments for Invoiced Work to maintain Positive cash flow throughout the project cycle.
• Follow the Project Management Process from award until handover including all statutory requirements and deliverables.
• Ensure compliance to Organizational Norms, policies, procedures and requirements of the process and quality hold points defined in the work instructions of the Top Range Excellence (as required by Project) / Fulfilment Plus process (On All Projects).
• Sign off as defined in ON 17100 for major projects, execute all contractual terms to continuously protecting Schindler's financial entitlements.
• Lead the project team and assign adequate authorities and responsibilities & Represent Schindler as Frontline Operative in all jobs under portfolio.
• Accountable for commercial sign off and final closure of the Project

A. Main Responsibilities

1.Responsible for all on-site technical and engineering matters.

2.Ensure works carried out meet company’s quality standards & contractual requirements.

3.Involved in project planning, monitoring project progress and schedule.

Including prepare work plan, schedule, preparation all the related work procedure/method statement, job safety analysis, technical clarification , resources management and procurement arrangement .

4.To co-ordinate with the client, consultant, sub-contractors on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.

Include attending all progress meeting.

5.Assisting Project Manager in monthly progress claims and monthly progress reports.

6.Ensuring supervisors, foremen, workers and sub-con meets client & regulatory work requirements.

7.Ensuring Environmental, Safety and Health practices are carried out at all times.

8.Other ad-hoc duties assigned from time to time

The MEP (Mechanical, Electrical and Plumbing) Engineer assists the MEP Manager and Project Manager in supervision of all MEP works at Project Site. Ensuring that works carried out by construction coordinators and subcontractors are in accordance with specifications, drawings and stipulated work programme. At the same time making sure that quality requirement, standards and MEP construction materials are efficiently utilized. The MEP Engineer plays a key role in coordinating with client’s representative, consultants, subcontractor, other trade coordinators, and BIM (Building Information Modelling) team, and managing a team of construction coordinators to ensure project is completed profitably.

What You’ll Do

We are seeking a Solutions Engineer - Artificial Intelligence (AI) to join our dynamic sales team. As an SE (AI), you will drive the adoption of our AI solutions across various industries. You will identify potential clients, understand their specific needs, and provide tailored AI solutions that enhance their business operations. This role requires a deep understanding of AI technologies and experience relaying technical concepts to a diverse audience.

Who You’ll Work With

The Cloud + AI Infrastructure team delivers one scalable strategy with local execution for data center customer transformation and growth. We are the worldwide go-to-market compute and data center networking engine gathering market transitions and allowing sellers to expand growth for customers and Cisco. Alongside our colleagues, Cloud & AI Infrastructure builds the sales strategy, activates sellers and technical communities, and accelerates selling.

Who You Are

You will build awareness, fostering education and driving energy for AI with both internal and external team members, partners, etc. You will also act as a link between technical teams, account teams, executives, partners/customers. In addition, you will show case AI solutions/products, its potential and promote its tactical and technical responsibilities. You will play an important role in the design, development and promotion of AI Solutions and address challenges. You will need to travel as needed to meet with clients and attend industry events.

Minimum Qualifications:

• 6+ years of technical presales experience selling Compute, Storage, and Network solutions.
• Proficiency in Python (must), MySQL, Github, Git, GO, ETL, OLAP, RDBMS, Scribus, AWS, Azure, Google, IBM Cloud, or other platforms and programming languages.
• Experienced with databases (Oracle, PostgreSQL, MySQL, MongoDB, Cassandra, Redis, Snowflake, BigQuery) and AI/ML frameworks (scikit-learn, TensorFlow, PyTorch, Hugging Face).
• Ability to provide detailed and consumable documentation of standard methodologies for deployment around application acceleration, automation/management efficiencies, enterprise edge, and AI/ML solutions.

Preferred Qualifications

• Bachelor's Degree in Computer Science, Computer Engineering, Electrical Engineering, or related field. Advanced degree is a plus.
• Excellent presentation skills – ability to deliver engaging workshops to both technical and non-technical audiences on AI topics
• AI experience with Nvidia, IBM, Microsoft, Dell, NetApp, HPE, and/or other AI vendors
• In-depth understanding of language models, including but not limited to GPT-3, BERT, or similar architectures.
• Expertise in training and fine-tuning LLMs using popular frameworks such as TensorFlow, PyTorch, or Hugging Face Transformers.
• Experience in deploying LLM models in cloud environments (e.g., AWS, Azure, GCP) and on-premises infrastructure.
• Familiarity with containerization technologies (e.g., Docker or equivalent experience) and orchestration tools (e.g., Kubernetes) for scalable and efficient model deployment.

Job Description:

• To strategise, organise, govern, and manage a project within a predetermined timeframe that is committed to customer.
• To successfully complete New Product Introduction (NPI) projects by meeting all the specifications and requirements and advancing them towards mass production, including anticipating and mitigating potential risks that may negatively impact the projects.
• To engage and work with customers on product specifications, requirements, costs, schedules, and quality.
• To generate and provide quotations for tools and moulded parts, upon receipt of Request for Quotation (RFQ).
• To collaborate internally with tool designer and engineering team on design for manufacturing (DFM) and proactively manage program documentations, technical and engineering changes.
• To update the status of on-going programs to the management.
• To consistently pursue for new customers.
• To establish and nurture a robust and affirmative rapport with our key customers to secure new and additional projects and pursue new customers to strengthen sales pipeline.

Requirements:

• Degree or diploma in mechanical engineering/precision engineering.
• Knowledge with practical experience in the field of plastic injection and injection tool fabrication, or mechanical product design is needed.
• Proficient in Microsoft Office suite of programs.
• Good verbal and written communication and presentation skills.
• Strong leadership to lead, guide and inspire the project team to produce quality work and stay committed to all deliverables.
• Business oriented, meticulous, and cost sensitive.
• Ability to analyse, solve problems and decision making.
• Strong organisational skills with a can-do attitude to always improve and initiate new ways of working to achieve results.

HOW TO APPLY:

Interested applicants, kindly click on “APPLY NOW” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

Job Description:

• To strategise, organise, govern, and manage a project within a predetermined timeframe that is committed to customer.
• To successfully complete New Product Introduction (NPI) projects by meeting all the specifications and requirements and advancing them towards mass production, including anticipating and mitigating potential risks that may negatively impact the projects.
• To engage and work with customers on product specifications, requirements, costs, schedules, and quality.
• To generate and provide quotations for tools and moulded parts, upon receipt of Request for Quotation (RFQ).
• To collaborate internally with tool designer and engineering team on design for manufacturing (DFM) and proactively manage program documentations, technical and engineering changes.
• To update the status of on-going programs to the management.
• To consistently pursue for new customers.
• To establish and nurture a robust and affirmative rapport with our key customers to secure new and additional projects and pursue new customers to strengthen sales pipeline.

Requirements:

• Degree or diploma in mechanical engineering/precision engineering.
• Knowledge with practical experience in the field of plastic injection and injection tool fabrication, or mechanical product design is needed.
• Proficient in Microsoft Office suite of programs.
• Good verbal and written communication and presentation skills.
• Strong leadership to lead, guide and inspire the project team to produce quality work and stay committed to all deliverables.
• Business oriented, meticulous, and cost sensitive.
• Ability to analyse, solve problems and decision making.
• Strong organisational skills with a can-do attitude to always improve and initiate new ways of working to achieve results.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format or please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lee Jun Siong (Johnson)

EA Personnel Reg No: R24120242

Responsibilities:

• Perform routine manufacturing processes and equipment preparation (CIP, PT, SIP, etc.)
• Support day to day production activities and record data according to Electronic Batch Record (EBR) in compliance with GMP, Environmental, Health and Safety guidelines.
• Perform equipment and process monitoring
• Able to communicate with Supervisor/supporting functions for any safety, quality, and process irregularities
• Troubleshoot and resolve process related issues.
• Able to perform production area housekeeping (5S, Kanban, etc.)
• Review documentation of activities as per GDP (Good Documentation Practice)
• Use sophisticated softwares / programs (LIMS, SAP, DCS, MES, etc.) to collect and evaluate data
• Responsible for maintaining and meeting training requirements.
• Any other task as assigned by Supervisor/Manager

Requirements:

• Degree/Diploma/ITE in chemical engineering, pharmaceutical or biotechnology equivalent
• Minimum 1 year relevant biotechnologist/laboratory experience, familiar in GMP and/or Upstream/Downstream/Central Services. Fresh graduate is welcome to apply.
• Basic skills and knowledge in Fermentation Cell culture, Bioreactor processing, Media and Buffer Preparation and downstream processing is an added advantage.
• Able to do rotating 12-hour shift work.
• Team player that possesses troubleshooting and analytical skills.
• Must be able to carry heavy load of up to 10kgs where applicable.
• Based in Tuas

Job Type: Fresh graduate

Contract length: 12 months

Experience:

• Fermentation Cell culture, Bioreactor processing & Media: 1 year (Preferred)
• Media and Buffer Preparation and downstream processing: 1 year (Preferred)
• GMP facility: 1 year (Preferred)

Job Description

• REs shall provide standing supervision of all civil and structural works to ensure compliance with the following authorities' requirements:
• The inspection of the bus depot involves the demolition and removal of the existing Pasir Panjang Distripark. Following this, the construction will take place for main depot building, dormitory and administration office.
• Knowledge of construction methods, materials, and safety protocols
• Supervise and monitoring of contractors’ work to ensure they are carried out in accordance with the provision in the contract document.
• To monitor the progress and assist SRE/QP on structural inspection on all Structural works according to the approved drawings issued.
• To review and supervise safety, environmental and health matters.
• Review and comment on contractor's submissions.

Job Requirements

• The RE shall have minimum three (4) years of experience as a civil engineer; and have least two (2) years shall be in supervision of works similar in nature to the Works in the Civil Contract.
• All RE shall have a diploma in the civil discipline or equivalent and be accredited by JAC of IES/ACES as QSS.

Work During Office hour

Monday to Friday: 8:30 a.m. to 5:30 p.m.

Saturday: 8:30 a.m. to 12:30 p.m. (Willing to work on rotation shifts)

Sunday and Public Holiday: 00:00 hours onwards or otherwise advised by project officer depending on LTA’s contractor work schedule.

Job Description

Microsoft 365 Administration:
Assist in the management and configuration of Microsoft 365 services including user provisioning and licensing.

Security Policy Implementation:
Review, implement and maintain Microsoft 365 security policies and services.

Cybersecurity Management:
- Ensure compliance with Cybersecurity certifications for the organization.
- Manage data protection and cybersecurity functions, ensuring systems are properly set up and maintained to safeguard against threats.
- Conduct cyber risk assessment in support of technology initiatives to help identify IT related risk and determine appropriate controls to mitigate risks.
- Monitor, track, and manage risk mitigations and exceptions and ensure adequate monitoring capability is incorporated into solutions.

System Setup & Maintenance:
Oversee the setup, configuration, and ongoing maintenance of computer hardware, networks, and systems to ensure optimal performance.

Technical Support:
Provide IT technical support for end-users, addressing issues related to hardware, software, network, and cloud services.

Vendor Liaison:
Be the point of contact between users and IT vendors to facilitate the delivery of IT solutions and services.

IT Asset Documentation:
Assist in the procurement and thorough documentation of IT assets following SOPs for onboarding, issuance, deployment, repair and disposal.

Additional Duties:
Undertake other tasks as assigned by Management to support organizational goals.

Minimum Qualifications

Educational Background:
Diploma or Degree in Computer Science or related discipline.

Technical Expertise:
Strong hands-on experience with the Microsoft Windows environment, including configuring and troubleshooting.

Microsoft 365 Knowledge:
Proficiency in configuring and managing Microsoft 365 services and implementing security measures.

Problem-Solving Skills:
Ability to diagnose and resolve a range of IT issues with effective troubleshooting.

Communication Skills:
Competence in liaising with both users and vendors of all levels, ensuring clear and timely communication.

Security-Focused:
Knowledge of cybersecurity best practices and experience in implementing security policies and procedures.

Desired qualifications:

• Professional Certifications in Microsoft 365 services and / or Cybersecurity
• At least 1 year experience communicating and servicing end users of all levels
• Experience using mobile device management software to manage both Windows and MacOS devices as well as mobile phones and tablets
• Familiarity with setting up and configuring servers and other network devices advantageous

Requirement/Skill:

· NITEC/Diploma/Bachelor in Electronic/Electrical/Mechatronics

· Understand the basic PLC programming

· Experience in machine building/machine assembly/machine maintenance

· Willing to travel to overseas for work (SEA region)

· Proactive & able to work independently

· Salary is negotiable depending on experience

Job Description:

· Machine assembly & adjustment

· PLC programming on automated machine.

· Machine setup & troubleshooting on site

· Manage incoming/outgoing parts

· Prepare documentation such as machine manual, report, etc.

Benefit

· 12 days annual leave, additional 1 day each service year

· 5~6 days company holiday per year

· Medical fee reimbursement

· Hospital & Surgical + Personal Accident Insurance

· AWS + variable bonus (based on performance)

· Yearly increment (based on performance)

· Overseas travel allowance

· Japanese language proficiency allowance

· Hands on training (local & overseas)

Job Highlights

· Market leader in coil winding machinery

· Extensive network in Asia Pacific

· Offer exposure to emerging industry

· Future expansion plan in SEA and India

Salary Range

SGD3,000~4,000

Company Overview

Nittoku is the world leading manufacturer of coil winding machinery and solution provider for Factory Automation Solution.

Established in Japan in 1972, Nittoku has grown from local machine manufacturer to global companies with extensive network in SEA, China, India, US & Europe.

Our product is used in wide-range of industries, from home appliances, electronic devices, automotive, EV, smart phone to RFID tag.

Nittoku has received numerous awards and recently chosen as Top100 Niche Global Company by Ministry of Economy, Trade and Industry of Japan.

Nittoku is a publicly traded company in Tokyo Stock Exchange.

Webpage

www.nittoku.co.jp

YouTube Channel

https://www.youtube.com/watch?v=4POwsNjz5N4

Roles & Resonsibilities

1. Attending site meetings
2. Supervision and quality checking
3. Manage and ensure workers in compliance
4. To work inside the structures where daily work is progressing to ensure work is done.
5. To take pictures and document daily onsite application process, workmanship level and the resulting quality of lining system.
6. Able to work long hours in construction/wastewater environment.
7. Submit the daily report at the end of each workshift on time for online daily report submission.
8. Able to create simple graphics and diagrams for daily work daily
9. Physically fit to climb scaffolding and do daily QAQC conformance inspection
10. Testing in accordance to Contract Specifications.
11. Able to interact with Contractors, Engineers and Clients professionally
12. Responsible for their own transportation and able to work independently.
13. Supervising and inspecting LinaBond PVC Linina is a plus.

Requirements:

1. Mininum Degree in Civil Engineering or related education certificate
2. Mininum 3 year related working experience in construction
3. PC Skill,PSD,AI etc
4. Class 3 driving license is a plus.
5. Long Working Hour in construction/wastewater environment and confined space environment, night shift might be required.

Job brief

We are looking for an innovative Civil Engineer to design, develop and construct a huge range of projects of the physically and naturally built environment from conception through to completion. You will have a say in how the world looks like, work in a fast growing dynamic industry, contribute towards healthy economies and make a lasting positive impact to society.

Responsibilities

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner
• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other)
• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications
• Assess potential risks, materials and costs
• Provide advice and resolve creatively any emerging problems/deficiencies
• Oversee and mentor staff and liaise with a variety of stakeholders
• Handle over the resulting structures and services for use
• Monitor progress and compile reports in project status
• Manage budget and purchase equipment/materials
• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required

Requirements and skills

• Proven working experience in civil engineering
• Excellent knowledge of design and visualizations software such as AutoCAD,Civil 3D or similar
• Proficiency in site layout, grading, utility design, erosion control, regulatory approvals etc
• Project management and supervision skills
• Strong communication and interpersonal skills
• License of professional engineer
• BS/MA in Civil Engineering

Responsibilities:

• Assist the project manager with on and off site meeting pertaining to the technical issues
• Responsible for submission of Architectural samples, shops drawing and other related documents to the consultants or authorities
• Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project
• Proven problem solving and achievements work progress according to the work schedule
• Site supervision and able to coordinate well with sub-contractors, RE and RTO

Requirements:

• Candidate must at least a Bachelor’s Degree, Post Graduate Diploma in Civil Engineering or equivalent
• Min 3 years relevant experience in the related field for this position
• Be able to work independently with minimum guidance
• Good team player, keen desire to learn, contribute, advance and progress with the company

Requirements:

· Hands-on experiences in installation, maintenance, troubleshooting and/or repairs in air-con systems or other machines electrical and mechanical diagnostic skills.

· Possess valid Singapore class 3 driving licence is an added advantage.

· Able to converse in English and interpersonal skills.

· Working location: Singapore island wide

· Working hours: Monday to Friday (9am to 5:30pm)

In this role you will plan, develop, deploy and support Continuous Integration (CI) and Continuous Deployment (CD) processes and tools to enable the team to deliver quality solutions. Your role may also involve developing unit tests and automated tests for next generation of products the team has in pipeline. You will get a chance to work in a diverse team environment and across the globe.

To assure CI process for different projects we are using:

• · Git/GitHub: to manage the repositories /different branches /tags / pull requests …
• · Jenkins: Freestyle jobs / Jenkins Pipelines
• · Scripting (shell/bat/python/groovy…)
• · Klocwork for Code analysis
• · Jfrog Artifactory /BOX or other tools of artifacts repositories managers
• · Infrastructure: How to set VMs /Docker images / setting Jenkins Slaves
• · Network: knowledge about firewalls /proxy …
• · Jira / Confluence

Requirements

• · Degree or diploma in Computer Science, Information Systems or Electronics Engineering or related field.
• · Has 1-2 years of experience in DevOps methodology, Continuous Integration/ Continuous Deployment tools and automation technologies.
• · Aware of DevOps tools (Git / GitHub, Jira, Jenkins, Confluence, etc.)
• · Knowledge of establishing process optimization, automation, and Continuous Integration / Continuous Delivery (CI / CD)
• · Experience in Automation or script creation with scripting languages (Shell / Perl / Python) for continuous integration and continuous deployment.
• · Industrial Automation domain knowledge and/or testing PLCs/Adapters/IOs is a plus.
• · Good interpersonal and communication skills to interact with team members.

Job Description:

• Develop firmware infrastructure/libraries and innovative cost-effective firmware solutions to meet all the product quality, test cost, manufacturing yield, and debug/diagnosability requirements

• Work closely with architecture/design, firmware/software, verification and characterization, and test development teams to debug any firmware related issues on simulation/bench/ATE (Automatic Test Equipment) to root cause the problem within short TAT, to ensure timely delivery of robust firmware solutions to meet the product release schedule

Job Requirements:

• A Bachelor/Master’s Degree in Electrical/Computer Engineering/IC Design or equivalent with 3 to 5 years of experience in Embedded Software development

• Extensive C programming and debugging experiences in the embedded domain for processor/microcontroller-based applications, with solid knowledge of Data structures and Algorithms

• Comfortable in Linux environment and familiar with Shell/Python/Perl scripting languages

• Experience in digital design and bare metal firmware development using FPGAs will have added advantage, and good knowledge of AXI/APB protocols is a plus

• Knowledge of Verilog RTL design and HW functional verification is also a plus

• Strong analytical and problem-solving ability, good organizational skills with ability to multi-task, prioritize and track many activities

• Good interpersonal and communication skills, and able to work well in a team environment that spans across continent

Role & Requirements :

• Strong hands-on experience in Oracle PL/SQL and Informatica PowerCenter.
• Strong hands-on SQL skill in any RDBMS.
• Experience in the Systems Development Life Cycle (SDLC) implementation methodology and/or Agile methodologies such as Scrum and Kanban.
• Experience in dbt Core or Snowflake will be an added advantage.
• Agile, fast learner, and able to adapt to changes.
• Good team player, with strong analytical skill and enjoy complex problem-solving.

SKILLS: Oracle, Pl/SQL, Informatica, PowerCenter, Snowflake

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

Project Engineers manage the planning and processes of a project and delegate responsibilities to ensure the project is completed efficiently and successfully. Their day-to-day duties and responsibilities may vary depending on the type of industry, company or project they’re working on, but typically include the following:

• Conduct regular meetings with clients to ensure clarification and meet specific requirements in a timely manner.
• Delegate tasks to team members according to their individual skill sets, experience and abilities to ensure efficient completion of the project.
• Maintain budgets and make adjustments according to needs as they arise.
• Track performance and analyze the completion of key goals.
• Document and report project progress to stakeholders and clients.

Job Description

· The IT operations support personnel shall be responsible for supporting the clients, vendors and other stakeholders for products and services

· The IT operations support personnel shall perform the following routine work:

§ Create and monitor the network, facility and security sensors

§ Log, troubleshoot, follow-up and resolve new and outstanding tickets

§ Perform remote hand service based on request by Customers

§ Support Internal Operational requirements

§ Partake in Maintenance Activities

§ Maintain and update reviews into documented Operational Procedures

· Perform physical network infrastructure deployment and cross connect provisioning for internal and customers

· Generate and analyse operational data for network performance, statistics and usage reports for network.

Job Requirements

· Higher NiTEC or Diploma and Above in any discipline

· Basic Knowledge on Networking and protocols is advantageous

· Good attitude and ability to learn

· Ability to work on a 24/7 rotating shift duty environment

· High-potential fresh graduates with no prior experience are welcome

· English speaking environment

· Training will be provided

Responsibilities

> Study and evaluate new method and materials to improve current

process and manufacturing capability

> Conduct DOE to determine the key process parameters and product

characteristic

> Assist production in setting up machine operation procedure and

safety guidelines

> Implement new process

> Explore possibility of reducing material standard usage or cheaper

source

> Determine the root cause for sample rejection for process related

issue

Requirements

1. Degree in Mechanical/Electrical Electronics/Mechatronics

Engineering or Diploma with 2 to 3 years working

experience

2. Good trouble shooting and analytical skills

3. Independent, creative, resourceful and able to take pressure

4. Good communication, report writing and presentation skills

5. Fresh graduates are welcome as training will be provided

About the Client:

Our client is a highly reputed organization in banking industry

Responsibilities:

• Administering O365 and Exchange hybrid environments, supporting 40,000+ users with their requests and problems related to these infrastructures.
• Identifying process gaps, performing process improvements and alignments to ensure flawless execution and flow.
• Implementing automated jobs through PowerShell scripting to address process gaps, following proper change management procedures.
• Configuring end-user Microsoft Exchange suite elements such as distribution lists, shared mailboxes, meeting room mailboxes, OneDrive, and transport rules.
• Administering and managing OneDrive,SharePoint, MS Teams, Microsoft Voice, and Microsoft Recording.
• Troubleshooting issues on email gateways(EOP, TrendMicro).

Requirement:

• Hands-on operational experience in messaging and collaboration, specifically Exchange hybrid, with skills in MS Teams/Skype for Business with enterprise voice.
• Experience with email gateways (EOP, TrendMicro, IronPort, etc.).
• Experience and knowledge in process improvements using scripting techniques.
• Proven experience as an L3 escalation engineer for operational issues and problems.
• Hands-on operational experience in troubleshooting messaging and O365 environments with PowerShell scripting knowledge.
• Scripting and automation experience in PowerShell, Python, and Graph API to automate business processes.
• Understanding of Microsoft 365 services (Azure, Exchange, O365, etc.).
• Experience with Azure Active Directory (AD) groups and Microsoft (M365) groups.
• Experience using ticketing systems like HPSM, Infinity, or JIRA.

Interested candidates, who wish to apply for the above position, please send in your resume to [email protected]

We regret that only shortlisted candidates will be contacted.

PERSOLKELLY Singapore Pte Ltd • EA License No. 01C4394 • EA Registration No. R24125310 (PARAMATASEEMA NAVEEN RAJANNA)

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

“By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an emailto let us know. Please feel free to contact us if you have any queries