Responsibilities:

· Execute field service activities per Company procedures and general practices of safety and cost-effectiveness.

· Perform basic troubleshooting, running tests, fine-tuning, adjustments, and trimming related to running performance on equipment.

· Independently perform significant/complex repairs and complete overhauls.

· Perform warranty and commissioning activities, delivering the equipment to the customer or a shipyard.

· Perform internal and external progress status reports of assigned work.

· Participate in briefings and debriefing for each service mission

· Create Service Work Reports.

· Collect and organize time sheets and expense reports. Report and inform the back office as required.

· Ensure the work is executed according to Company Quality, Health, Safety, and Environmental guidelines and customer site procedures.

· Issue WeCare and Non-Conformance Reports when appropriate to ensure "lesson learned" from experiences gained at service missions

· Execute Client Survey after each job

· Supervise the tasks performed by Company employees and subcontractors.

· Advice and promote company products and solutions to customers.

· Participate in other department work as directed by the Line manager.

Requirements:

· Bachelor degree in Process, Automation, Mechanical, Marine, Electronics, or Mechatronic Engineering

· 3-5 years hands-on experience in process and electrical & Automation disciplines

· Knowledge or Experience in LPG/LNG/VOC/IG, Flare Gas systems, and Renewable & General Gas handling would be considered as advantage

Responsibilities and Tasks
• Provide engineering study is to include good design practice for state-of-the-art system designs, system capacity and capability analysis, planning for future requirements, as well as code compliance.
• Maintain engineering data bases in support of capacity tracking, capital equipment facilitation, and cash flow project management for assigned systems/areas.
• Provide support for start-up of new equipment and ensure that all equipment will properly interface to other mechanical and electrical systems.
• Specify critical components for design projects and is responsible for assuring designs meet all applicable codes and regulations. The applicable code review and analysis utilizing (but not limited to): IFC, IBC, NEC, NFPA, FM, CGA and Semi standards. This requires continual review and analysis of new and existing equipment, applications, and technology.
• Perform engineering study on emerging facilities technologies to support cutting edge semiconductor processes.
• Participate in mid to long term infrastructure planning for facilities in support of the overall company plan.
• Work with in-house TGCM contractor and ensure chemical and Gas Delivery system running smoothly.
• Review and improve Operation and Maintenance SOP and RA.
• Respond to system issues. Perform Trouble Shooting with in-house TGCM contactors and OEMs.
• Verify all works done by Chemical and Gas section are in accordance with company safety guidelines;
ensure safety features are engineered into designs; and maintain good communication with other engineering disciplines and customers throughout the organization.
• All team members are required to complete their learning items within the stipulated time frame.

For business process and/or QMS component that one is responsible or accountable for:
a. ensuring the QMS/business process that is effective and conforms to requirements.
b. ensuring that the processes are delivering their intended outputs.
c. reporting on QMS/business process performance and opportunities for improvement to management.
d. ensuring the promotion of internal and external customer focus throughout the organization.
e. ensuring the maintenance of the integrity of the QMS/ business process when changes are planned and implemented.
f. ensuring customer requirements are met.

• Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws
and regulations.
• Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings.
• Prepares bid sheets and contracts for construction and facilities acquisition.
• Reviews and estimates design costs including equipment, installation, labor, materials,preparation and other related costs.
• Inspects construction and installation progress for conformance to established drawings, specifications, and schedules.
• Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

Education

• Bachelor’s degree in Chemical Engineering or equivalent discipline.

Skills, Knowledge and Abilities

• Good team work and collaboration

• Excellent communication and presentation skills

• Strong problem solving and analytical skills

• Independent and able to work on own initiative

• Good organizational skills and ability to prioritize and schedule workload

• Good knowledge of Microsoft Office

Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations. Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Prepares bid sheets and contracts for construction and facilities acquisition. Reviews and estimates design costs including equipment, installation, labor, materials, preparation and other related costs. Inspects construction and installation progress for conformance to established drawings, specifications, and schedules. Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

Our client provides advanced instruments and systems designed for high performance across various industries.

• Connect with prospective clients to provide tailored semiconductor solutions.
• Manage the entire sales process, from prospecting to after-sales support.
• Liaise with global teams and R&D to tailor solutions to customer needs.
• Drive growth by exploring industry trends and opportunities in the SEA market.
  Foster and sustain strong client partnerships.

Requirements:

• Degree in Materials Science or equivalent.
• At least 2 years of sales experience in the Metrology/Scientific Industry.
• Good understanding of semiconductor processes for laboratory equipment uses for failure analysis, quality control and metrology equipment for thin film.
• Excellent communication, negotiation, and customer relationship skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Duties and Responsibilities

• Develop web application prototypes, new technologies and products.
• Build highly responsive and scalable web applications.
• Build fully functional web applications with interfaces to backend database, writing clean and maintainable code.
• Build fully functional, clear, testable backend RESTful/SOAP APIs with interfaces to backend database.
• Resolve defects, and generally ensure accuracy, integrity, interoperability and completeness of system.
• Build regularly automated tasks to perform functions specific to the project requirements.
• Build interfaces to exchange data between various third-party systems.
• Resolve defects, and generally ensure accuracy, integrity, inter-operability and completeness of system.
• Troubleshoot and debug to optimize performance.
• Prepare and deliver software related documentation.
• Provide timely updates to the web and backend application.
• Provide support and maintenance of existing software web application projects.
• Respond to users in a timely manner.
• Work with fellow software engineers to coordinate the development effort and ensure overall consistency in the coding and the interfacing between various components and sub-systems in order to achieve a full functioning solution.
• Work with consultants to craft user stories, assess feasibility and build demonstration showcases.
• Work with consultants and senior engineers to develop test scenarios to ensure full functionality of system before user acceptance test.
• Work with customers and partners, both internal and external where there will be collaboration for knowledge transfer.

Essential Skills and Experience

• At least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma or Professional Degree in Engineering (Computer/Telecommunication), Computer Science/Information Technology or equivalent.
• Fresh graduate, or up to 2 years of relevant working experience
• Tech Stack Requirements: ASP.NET Framework 4.5 or .NET Core, C#, HTML, CSS, Javascript, SQL Server
• Good problem solving, logical reasoning, planning and time management skills
• Effective communication and technical writing skills
• Strong interest in software engineering
• Willingness to learn on the job, and constantly eager to learn new skills on one’s own
• Ability to work well in teams and also independently in a fast-paced environment
• Familiarity with mobile application development (with Xamarin) is a plus.
• Familiarity with backend API development (with .NET technologies) is a plus.
• Domain knowledge in accounting, or procurement, or inventory management, or leasing, or computerized maintenance management, or billing, or resource booking, or Enterprise Resource Planning is a plus

Only shortlisted candidates will be notified

Purpose: Responsible for establishing process steps to produce in-house-made parts and meet customer expectations concerning quality, lead time, cost, and technological needs. Process Engineer drives improvements in process methods to enhance performance and output.

Key Area of Responsibilities:

• Establish process steps to produce in-house-made parts and meet customer expectations in terms of quality, lead time, cost, and technological needs, without compromising health and safety.
• Create process routing (work instructions) & BOM in BaaN, and prepare an Inspection Method Sheet (IMS)/checklist.
• Read and interpret 2D drawing, 3D model and customer specifications on drawing.
• Ensure process routing is ready for both the first article and volume production.
• Perform sustaining engineering work (documentation of the process, optimization of resources, support production team, resolving technical/quality issues).
• Monitor process performance (quality, cost, lead time) and yield using tools (e.g.: SPC).
• Monitor First Article (FA) progress and resolve technical issues in a timely manner to ensure smooth production flow from FA to volume production.
• Drive improvements to process methods to enhance performance and output.
• Take accountability in leading special projects and processes, treating it like a specialist in the identified process assigned by a superior.

Qualification & Experiences:

• Degree in Mechanical, Precision Engineering, or other relevant discipline.
• Minimum 3 years of working experience in the precision machining industry.
• Strong knowledge of manufacturing processes
• Knowledge of interpretation of engineering drawing
• Knowledge of designing tools (GD&T)
• Problem Solving and Continuous Improvement

• Prepare and give technical presentations to explain to customers how the products and services work.
• Work with the customers and Engineers to ensure the equipment meets the system requirements.
• Communicate with the sales team to understand consumer demands and offer sales support where necessary.
• Secure orders, guarantee product standards and assure product delivery.
• Establish customer rapport and acceptance.
• Plan for modifications to products to meet consumer demands.
• Help clients to solve problems with product usage.
• Recommend new and improved products to the customers and explain how the equipment will be more cost-effective.

• Basic $4000 - $5200 + Variable Bonus + Allowances
• Excellent Welfare and Benefits + Career progression
• Working location: West / Northeast (Both location available)
• Working hours: 8:30am – 5:30pm (Mon – Fri)
• BMS (Building Management System) // ACMV // Control Valve
• Mechanical Engineering - Training Provided

Job Responsibilities:

Liaison with Subcontractors:

• Coordinate with subcontractors for project updates and service execution, ensuring alignment with technical specifications.
• Monitor subcontractor performance to uphold quality and safety standards.

Client Interaction:

• Serve as the primary contact for clients regarding service inquiries and project progress.
• Attend client meetings to discuss project requirements, timelines, and address any concerns.

Project Management:

• Track and manage service projects, ensuring timely delivery and adherence to client specifications.
• Assist in preparing and submitting project documentation, including service reports and compliance materials.

Coordination of Meetings:

• Organize and participate in internal and external meetings to discuss project status and resolve issues.
• Prepare agendas and meeting notes, ensuring effective communication among stakeholders.

Documentation and Reporting:

• Maintain accurate records of project activities, subcontractor communications, and client interactions.
• Generate regular progress reports for management and stakeholders.

Continuous Improvement:

• Identify opportunities for process improvements in service delivery and communication.
• Collaborate with team members to implement best practices, enhancing operational efficiency and customer satisfaction.

Requirements:

• Diploma/Degree in Mechanical Engineering or Electrical Engineering or any related discipline
• Training will be provided for candidate without or with lesser experiences

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

• To analyse user requirements and design, develop, implement and maintain computer applications to support and assist users to meet their business objectives more effectively and efficiently.
• Develop, support and enhance the Data Download Centre (including Engineering Portal) and iSCM websites.
• Develop, support and enhance Excel productivity enhancement tools (VBA macros).
• Support end-users in usage of Plasma and ACCPAC and help to resolve any operational issues, including working together with vendor (Databit) if necessary.
• Develop and enhance data extraction and transformation mechanisms on source systems (e.g. Plasma, YEOS, NYQT, Oracle BI, SAP RFC, PTS etc.) and store the results into Plasma Info Server Monitor the space consumption of Plasma Info so that Server database so that potential problems (e.g. disproportionate consumption of disk space by a particular table, depletion of data tablespace, excessive consumption of temp tablespace) are detected and resolved early to avoid unscheduled database downtime.
• Perform ad-hoc retrieval of order/production/sales data to support incident investigation, reporting or other requests.
• Support Migration Activities of Existing Plasma Info Server to SAP.
• Support & ensure successful implementation of Company-wide Automation (ERP) Projects.

Requirements:

• Degree in Info Systems/Computer Science or its equivalent
• Prefer 2-3 years relevant experience in Manufacturing Industry.
• Entry level are welcome to appy as training will be provided.

Knowledge:

SQL; Oracle PL/SQL; MS SQL Server Transact-SQL

Object-oriented analysis and design

ASP.NET 4.5.1; C/C++/C#; XML

JavaScript; JQuery; CSS; HTML

Excel VBA; VBScript; PowerShell

PHP, VS.Net, MSOffice

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd

License No: 06C3745

Attention: Audris Teo / EA Personnel No: R1102063

(2 years contract renewable)

4 days, 12 hrs rotating shift from 7-7; first few months permanent night shift from 8.30pm-6am

Currently the 4 days shift is spread from Monday to Saturday, 2 days off. Sunday is rotating standby.

Salary: $2700 -$3000

Location: Bedok office

Job scope:

• To perform comprehensive maintenance for system
• To perform site supervision and hands on when required..
• To perform troubleshooting and devise resolution when issues or faults arises.
• To communicate/supervise contractors on safety and work related tasks.
• To execute job related tasks assigned by Engineer/Shift Engineer.
• To complete reports for jobs done.

Requirements:

• Diploma in Mechatronics, Electrical or Electronics
• Willing to work at height (6 meters) on outdoor public road on gantries.
• Experience in electrical and electronic works.
• Class 3 driving license is required
• Experience in basic Microsoft office.
• Understand basic Window system.
• Experience in site supervision work.
• Understand in Mechanical/Electrical/Electronic system
• Able to work in 12 hours rotating shift, first few months will be permanent night shifts

Quah Siying (Jeslyn) R1982418

The Supreme HR Advisory Pte Ltd 14C7279

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a E&I Engineer to assist their E&I team for the next phrase of their business. They are located in South – easily accessible.

Duties of E&I Engineer:

• Review project specs to ensure equipment meets contract requirements
• Prepare and approve instrument and electrical deliverables (e.g. wiring diagrams, lists, data sheets)
• Create material requests and evaluate bids for electrical and instrument equipment
• Develop engineering standards and procedures for design
• Monitor project costs and schedules
• Attend technical meetings and address client feedback
• Support plant start-up and on-site troubleshooting
• Provide technical support and estimates to the sales team
• Advise engineers and Project Managers
• Follow company health and safety guidelines

Requirements

• Minimum Degree in Engineering/ Electrical or equivalent
• Minimum 5 years of relevant experience
• Familiar with key engineering concepts and practices
• Strong organizational and multi-tasking skills
• Excellent problem-solving and analytical abilities
• Proficient in Microsoft Office, Microsoft Project, and AutoCAD
• Strong verbal and written communication skills
• Able to work independently with attention to detail
• Good teamwork skills
• Knowledge of hazard area classification
• Fluent in English (speaking and writing)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

EA License No: 19C9682

EA Personnel No: R21101676

EA Personnel Name: Ng Zhi Qing Alethea

Job Description:

• Implement strategies to acquire new clients and expand the customer base within the security and IT solutions industry
• Perform needs assessments to understand clients' security requirements and recommend suitable solutions
• Maintain up-to-date knowledge of advancements in technology and the company's product offerings
• Provide product demonstrations and compelling presentations to highlight the benefits of solutions
• Craft tailored sales proposals that address clients' specific security needs and emphasize the value proposition

Job Requirements:

• Min a bachelor's degree in IT engineering, or related field is preferred. Additional technical qualifications in security systems or electronics are a plus.
• Demonstrated success as a sales executive in the IT or physical security industry, with specific knowledge of CCTV, access control systems (ACS), network technology
• Experience with selling SaaS solutions is highly advantageous.

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845

Our client is a well-established MNC, market leader in the IT industry. Due to their current expansion plan, they are looking for an Information Security Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities:

• Handle post-sales activities of related products and solutions.
• Engage in the implementation of large-scale projects.
• Offer on-site services, including deployment, testing and preparation of documentation.
• Provide technical assistance to maintain high levels of customer satisfaction.
• Troubleshoot customer inquiries by leveraging existing knowledgebase resources and resolving known issues.
• Be available for standby support to manage 24/7 maintenance calls.
• All other adhoc duties as assigned.

Requirements:

• Minimum diploma in IT / Cybersecurity or other related field of studies.
• Minimum 2 years’ IT support experience.
• Certified CCNA or CCSA is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Project Engineer

• Working hours: 5.5 days (8am – 6pm)
• Salary: $3500 - $5000 (Depends experiences)
• Location: Island-wide (Depends Project Location)

Interested applicants can send your resume to ✉ [email protected] or WhatsApp: +65 94283063 and allow our Consultants to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Responsibilities:

• Manage the transmission of documents and drawings to the client and subcontractor to ensure the updated drawings are issued.
• Prepare method of statement and work procedure
• Conduct weekly or monthly meeting with sub-contractors to update progress of work
• Ensure quality of work is achieved and all government and safety regulation are complied
• Oversee drawing management and control of technical documentation
• Manage procurement of resources, monitor and control material usage on site to avoid unnecessary wastage or wrongly usage.
• Assist the Project Manager or Senior Project Engineer in co-ordination with consultants on change order issued and liaise closing with the Quantity surveyor by providing necessary supporting documents on the change order
• Organize labor, equipment and material for day to day site activities
• Carry out material receiving inspection and maintaining material record. All delivery order are to be return to office for record
• Prepare daily and monthly progress report, perform and maintain inspection record.
• Any other duties assigned

Requirement:

• Min 2 years of relevant experiences
• At least Degree Holder in Civil Engineering

Leo Shin Guan Reg No: R22108030

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Working Days: 5 Days A Week (Monday – Friday), 8.30am to 5.30pm, Saturday may need work half day if work required (can claim OT)
Office at Coleman St, The Adelphi, Singapore (City Hall), may need work at site
Salary: $5000 to $7500

Requirements
Minimum of 5 years of relevant site / construction experience.

Roles & Responsibilities

• To coordinate with consultants / subcontractors on the shop drawings / samples / method statements and keep all involved parties updated of the latest changes.
• To attend to project / technical meeting and resolve site issues with owner / consultants for the site progress to proceed smoothly.
• To verify the work done on site are in accordance with the approved drawings / specifications / authority’s requirement and ensured that the subcontractor carry out rectification for non-compliance.
• To resolve site issues with consultants / subcontractor / supplier ASAP to minimise delay to the construction progress.
• To ensure that the related documentations are updated and ready for ISO audit.
• To cooperate with the safety department and carry out the assigned duties within the safety framework.
• Assist site management team in project Planning & coordination.
• Plan and schedule work sequences for construction operation.
• Arrange and prepare documents for authorities’ submission for Conquers, RI, TOP etc.
• To study tender / construction drawings, specifications, and contracts to understand project requirements.
• Understanding of critical project criteria related to schedule & productivity.
• Able to provide guidance to new staff / junior staff.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Position title : Vision Software Engineer

Location: Admirality Street
Working Days: 5 Day A Week
Working hours : 9:00am - 6:00pm
Salary : $5000 - $8000 (depends experience)

Job Summary:

We are seeking an experienced Software Engineer to join our team, responsible for
designing, developing, and maintaining software applications for vision systems.

Responsibilities:

• Design and develop PC based automated visual inspection systems for our full range of semiconductor equipment.
• Evaluate and feasibility study on the customer’s vision specifications.
• Responsible to integrate any new vision hardware (camera, frame grabber, etc) onto the vision software.
• Troubleshooting and improve the processing time of the inspection.
• Provide technical support to internal and external customers to fulfill the inspection requirements. Change the vision inspection algorithm to improve the inspection capabilities and its performance.
• Be the key driver for continuous improvement plans for new and existing inspection capabilities.
• Coordinate with customer for any new enquiry with sale personnel if needed.
• Work closely with the vision application and optics team members to produce the best inspection result.
• Build and nurture a culture in engineering organization of harmony, quality, ownership, collaboration, continuous improvement and data-driven decision making.

Requirements:

• BS Science Diploma or higher in electrical and electronic, mechanical, or mechatronics engineering or related technical discipline or equivalent practical.
• Technical troubleshooting experience.
• Minimum 3 years in related field.
• Relevant technical work experience including automation machine system troubleshooting.
• Experience working with end customers.
• Understanding semi-conductor manufacturing process, vision inspection settings, machine software settings and configuration or equivalent practical experience.
• At least 3+ years of experience in software development with C#, WPF, Image Processing , Halcon (bonus)

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745

• Well Established Company
• Basic $4000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: North
• Working days: Monday to Friday
• Working hours: 8am – 5pm

Job Responsibilities:

• Perform visual and functional checks on the products on site
• Provide site supervision on contractors for proper installation of the products.
• Handle trouble shooting on products on site and identify any leaking or faulty installation of the components
• Communicate with workers on site and supervise their tasks
• Present on improvement plans that generate pull through of product sales
• Work closely with Sales to promote on-site services contracts
• Provide both technical and market insight support to sales department for Oil & Gas market and mechanical packages
• Coach, mentor and elevate associates’ capabilities to enable them to deliver results exceeding expectations while creating opportunities for development and succession
• Any other ad-hoc duties as assigned

Job Requirements:

• Possess minimum Bachelor’s degree in Instrument / Mechanical engineering or strong science/technical discipline with at least 1-2 years of relevant onsite sales experience in instrumentation or process industry

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

5 days, 8.30pm- 5.50pm

Salary: $3500 -$4000

Location: Bedok office & client site

Job scope:

• To provide necessary post-project application software support to the client
• Troubleshoot, debug, enhance and optimise programs
• Develop new applications

Requirements:

• Candidate must possess at least a Diploma or Degree in Engineering, Computer Science/Information Technology or equivalent.
• Knowledge in Oracle PL/SQL, Oracle Pro-C programs, Unix ANSI C, visual basic.net using Visual Studio 17, Unix scripting
• At least 1 year relevant experience in end user and operation support

Quah Siying (Jeslyn) R1982418

The Supreme HR Advisory Pte Ltd 14C7279

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a QC Coordinator Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Conduct quality control audits.
• Organize pre-inspection meetings with clients.
• Create Project Inspection and Testing Plans.
• Draft Project Inspection and Testing Procedures.
• Address client feedback on QC documents.
• Coordinate and schedule QC activities, including inspection notices and factory acceptance tests.
• Manage coordination and scheduling of QC procedures, reports, and documents.

Requirements:

• Minimum of Bachelor Degree in Engineering or Quality Management
• Minimum of 5 years experience in Quality Control function.
• Experience in the Oil and Gas or offshore and marine industry
• Proficiency in metal welding inspection and piping system testing and inspection

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

Job Description:

• Manage & Lead the electrical team.
• Perform engineering duties such as design, engineering calculations, planning, tender.
• Preparation/evaluations as part of the engineering project team

Team development

• QA/QC documentation review of engineering deliverables
• Liaison with clients, project managers, architects, contractors
• Resolve any technical problems faced during project design and/or construction stages
• Suggests ways to increase revenues and efficiency.
• Testing & Commissioning of the ACMV Electrical Systems.
• Ensure the team follows all electrical codes and standards.

Job Requirements

• Any qualification in a relevant engineering field with minimum 5 years of related working experience in the Construction Electrical Field associated with ACMV / Electrical.
• Engineering design of commercial buildings, major infrastructure transportation projects and mixed-use developments
• Possess design experience and good understanding of ACMV / Electrical technical systems and procedures:
• Possess knowledge on all cabling, loading and sizing calculations and equipment selections such as cable, generators, panels, etc.
• Develop, design through establishing, design briefs, design reports, calculations, schematics, schedules, specifications, concept, Preliminary, Detailed and Construction Engineering Designs
• Productions of drawings and developing models Site Experience, Testing & Commissioning Experience

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845

Job Title: R&D Engineer - Electrolyte (Battery Material Research Division)

Location: NTU-Durapower Advance Lithium Battery Joint Lab #02-01, 1 Cleantech Loop, Singapore 637141

Overview:

We are seeking dedicated R&D Engineers specializing in electrolyte development to join our dynamic Battery Material Research Division. This role focuses on advancing high silicon-based projects, optimizing electrolytes for high-voltage, high-power, and high-safety applications, particularly in the realm of solid-state battery technology.

Key Responsibilities:

· Electrolyte Formulation: Lead and contribute to the development and optimization of electrolyte formulations tailored for high silicon-based battery projects, emphasizing enhanced performance, safety, and stability.

· Integration of Silicon Anodes: Collaborate within multidisciplinary teams to effectively integrate high-capacity silicon anodes into battery systems, addressing challenges related to volume expansion, cycling stability, and interface engineering.

· Experimental Design and Analysis: Design and execute experiments using coin and pouch cell configurations to evaluate and iterate on electrolyte performance. Analyze data to inform the enhancement of battery characteristics.

· Collaborative Research Initiatives: Work closely with cross-functional teams, including materials scientists, physicists, and mechanical engineers, to drive innovation in battery technology. Contribute actively to the advancement of solid-state battery research.

· Documentation and Reporting: Maintain meticulous records of experimental procedures, results, and analysis. Prepare technical reports and presentations contributing to scientific publications or patents.

Requirements:

· Bachelor's degree or higher in Material Science, Physics, Mechanical Engineering, or related fields.

· Proficiency in electrolyte chemistry and its significance in battery performance.

· Strong grasp of battery materials, with a focus on high silicon-based projects.

· Prior experience or demonstrable skills in experimental design and hands-on work with coin or pouch cell fabrication and testing.

Preferred Skills:

· Prior exposure in Project & R&D laboratory setting

· Experience or exposure to solid-state battery technology and solid electrolytes.

· Familiarity with software tools for data analysis and simulation in battery research.

· Any prior experience in industrial R&D, especially in battery or energy storage-related projects, would be advantageous.

· Knowledge or exposure to characterization techniques (e.g., impedance spectroscopy, SEM, TEM, X-ray techniques) is advantageous but not mandatory.

This role offers an exciting opportunity to contribute to cutting-edge research in battery materials, particularly in harnessing the potential of high silicon-based projects and advancing the development of next-generation solid-state batteries. Join us in shaping the future of energy storage technology!

Software Engineer

5 days, 8.30pm- 5.50pm

Salary: $3500 -$4000

Location: Bedok office & client site

Job scope:

• To provide necessary post-project application software support to the client
• Troubleshoot, debug, enhance and optimise programs
• Develop new applications

Requirements:

• Candidate must possess at least a Diploma or Degree in Engineering, Computer Science/Information Technology or equivalent.
• Knowledge in Oracle PL/SQL, Oracle Pro-C programs, Unix ANSI C, visual basic.net using Visual Studio 17, Unix scripting
• At least 1 year relevant experience in end user and operation support

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Lighting Designer

5 days, 8.30am-5.30pm

Salary: $3200 -$4200

Address: Joo Koon

Prime lighting specialist in Singapore and specialize in a wide range of lighting products and have been highly successful in securing numerous projects for commercial, industrial, institutional, utility and residential lighting.

Job scope:

• Demonstrate a clear understanding of Light in the architectural context
• Produce Lux calculations, Product Brochure, Cut-Sheets, Renderings, AutoCAD Drawings, Specification Sheets, Work Instructions and Procedure Manuals calculations
• Develop concepts into schematic and detailed designs with CAD drawings and technical specifications
• Work closely with clients to develop concepts for façade, interior and landscape lighting
• Provide budget and power consumption estimates
• Represent the company at meetings & design-workshops with clients/suppliers
• Work with large scale floor plans and calculate lux level
• Multi-task across all ES-team projects and work independently
• Manage project administration including Project Logs; Project Document/ Issuance Register & filing according to documentation standards
• Be responsible for time management concerning project deadlines; deliverables; meeting scheduling
• Continually enhance professional knowledge of new technologies
• Manage and continually update other staff about new products procured
• Provide Graphic Design support for marketing materials on an ad-hoc basis
• Proactive and creative in recommending products/modification in lighting stimulation to achieve target objectives

Requirements

• Min 2-3 years of relevant design experience in Lighting Design or relevant disciplines
• Experience on large scale architectural projects is advantageous
• Proficient or experienced in Adobe Illustrator, Photoshop, SketchUp, DiaLux/DiaLuxEVO, AGI32, AutoCAD 2D/3D, Microsoft Office and Excel

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WHO WE ARE

Goldman Sachs is a leading global investment banking, securities and investment management firm that provides a wide range of services worldwide to a substantial and diversified client base that includes corporations, financial institutions, governments and high net-worth individuals.

Founded in 1869, it is one of the oldest and largest investment banking firms. The firm is headquartered in New York and maintains offices in London, Bangalore, Frankfurt, Tokyo, Hong Kong and other major financial centers around the world.

We are committed to growing our distinctive Culture and holding to our core values which always place our client's interests first. These values are reflected in our Business Principles, which emphasize integrity, commitment to excellence, innovation and teamwork.

UNIQUE OPPORTUNITY

We are building out our Singapore Data Engineering team, this is a unique opportunity to be part of a global Tier 1 Investment Bank. You will be a part of industry leading community spanning New York, Dallas, Sydney and Bangalore.

TEAM OVERVIEW

Market Data provides critical input for all trading decisions that take place at Goldman Sachs. The Market Data Engineering team is responsible for the consumption and timely, accurate distribution of all real-time and historical data provided by global stock exchanges, brokers and data vendors including Bloomberg and LSEG (Refinitiv).

Our core service provides the firm with high volume of real-time streaming data that is globally accessible. It has high availability, is highly scalable with single digit millisecond latency SLAs for the most sensitive clients. This is engineered with a ticker plant that consists of hundreds of nodes, thousands of application instances, thousands of consumers, and updates peaks of millions of messages per second.

We are a dynamic, entrepreneurial team with a passion for technology. We look for engineers, with a growth mindset who are driven to automate and improve. Essential Skills include solid Network and OS (Linux) fundamentals, SDLC experience (e.g. scripting, coding, git, svn) and the role would be a good fit for someone who feels they would thrive in a fast-paced, changing environment.

HOW WILL YOU FULFILL YOUR POTENTIAL

• Work with open-source, vendor and internally built software where appropriate.
• Design, engineer, deploy, troubleshoot, patch and fix software and infrastructure while innovating on core platform design and architecture.
• Engage with global team to establish and evolve best practice for operational excellence including availability, scalability, reliability, resiliency and performance.
• Solve problems in order of business value and understand that technical and business perfection are often competing goals.
• Engage with vendors, exchanges and internal businesses on impact and delivery of upcoming changes.
• Gather and analyze metrics from both infrastructure and applications to assist in performance tuning and fault finding.
• Positively contribute to continuous technical development of the team, including technical engineering documentation.
• Deliver complex, business critical infrastructure projects.

BASIC QUALIFICATIONS

• 3+ years of experience as DevOps Engineer, SRE, System Admin or equivalent role, with a desire to learn more.
• Ability to code or script (e.g. bash/python/go) using an SLDC environment (e.g. gitlab CI/CD).
• Familiarity with Infrastructure as Code processes and tooling.
• Strong understanding of Network and OS Linux fundamentals.
• An understanding of the operational concerns in a demanding environment; ideally, but not necessarily, capital markets.
• Resilient under pressure, have a mind-set of continuous improvement and desire to provide excellent service.
• Proactive approach to spotting problems, areas for improvement, performance bottlenecks, etc.
• Live service monitoring, logging, intelligent alerting, self-healing (network, server and application).
• Maintain live services by measuring and monitoring availability, latency and overall system health.
• Ability to adapt and be open-minded, without skimping on our core values and standards.
• Driven to eliminate toil by designing/adopting better tools and automation techniques.

PREFERRED QUALIFICATIONS

• Financial markets/ trading business knowledge.
• Knowledge of market data products eg. Refinitiv (TREP), Exegy, Activ Financial, BPIPE, ITRS.
• Experience with large scale/ high frequency/low latency distributed applications.
• Experience or knowledge of containerization and cloud deploy (e.g. in AWS or GCP).

ABOUT GOLDMAN SACHS

At Goldman Sachs, we commit our people, capital and ideas to help our clients, shareholders and the communities we serve to grow. Founded in 1869, we are a leading global investment banking, securities and investment management firm. Headquartered in New York, we maintain offices around the world.

We believe who you are makes you better at what you do. We're committed to fostering and advancing diversity and inclusion in our own workplace and beyond by ensuring every individual within our firm has a number of opportunities to grow professionally and personally, from our training and development opportunities and firmwide networks to benefits, wellness and personal finance offerings and mindfulness programs. Learn more about our culture, benefits, and people at GS.com/careers.

We’re committed to finding reasonable accommodations for candidates with special needs or disabilities during our recruiting process. Learn more: https://www.goldmansachs.com/careers/footer/disability-statement.html

© The Goldman Sachs Group, Inc., 2024. All rights reserved.

Goldman Sachs is an equal employment/affirmative action employer Female/Minority/Disability/Veteran/Sexual Orientation/Gender Identity