SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Senior Engineer/Engineer to be part of our Product Engineering diverse team of talent. You will be responsible for yield, quality and reliability issues of devices.

What you will be working on:

• Resolve yield, quality and reliability issues in the qualification of new devices
• Perform pre-tapeout risk assessment and communication with Business line/ Fab on the necessary actions to eliminate/ minimize risk
• Conduct product yield analysis to identify root causes of wafer sort and final test failures
• Work with Customers and Account Managers to maximize die output
• Establish product low yield criteria and dispositioning
• Provide product engineering support to failure analysis lab for electrical fault isolation
• Provide product engineering support to reliability lab to understand and resolve reliability failures
• Compliance to safety, discipline and housekeeping rules
• Support cost reduction through yield improvement and resolving excursion
• Participate in continuous yield and productivity improvement projects

More About You:

• Bachelor's Degree in Engineering (Electrical/Electronic) or equivalent
• 2 years of relevant product engineering experiences in front-end wafer fab environment or
• In depth knowledge of semiconductor device physics, electrical & electronics engineering fundamentals & wafer fabrication processes
• Strong analytical and problem solving skills
• Good communication and interpersonal skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

- Propose alternative design to substitute tender design that is practical, liable, cost-saving and conforms to relevant building code of practice.

- Liaise with client, architect, consultant, and main contractor for any site issues to ensure timely project execution. To represent the Company at site meetings and other meetings as required.

- Responsible for site coordination workers and to make accurate, decisive, and prompt decisions relating to work matters. Feedback to management on site problems for corrective actions to be taken.

- To ensure details in subcontracts, purchase orders are accurate and meet with the project specifications in covering the full scope of work intended and required by the main contract.

- Efficient project management which includes project scheduling, lead, and co-ordinate the whole project team which include supervisors, foreman, workers and subcontractors.

- Source for more competitive costs in equipment and subcontractor costs to minimize project cost and capital utilization.

- Responsible for preparation, checking and submission of shop drawings before commencement of installation works and as-built drawings upon completion. The drawings shall provide for the openings through building structures for the passage of M & E services and shall ensure conformance to regulation and clients’ requirements.

- Submission of monthly progress claim to clients and monitoring of variation works, avoid wide differential in claim and payment amounts. To finalize project accounts and variation claims early for client’s verification and payment.

- To monitor the progress of work on site and recommend, if appropriate, the interim payment certification to supplier/subcontractors proposed by the designated Project Engineer.

- To access, recommend and recruit suitable subcontractors and work force to provide quality engineering services to our clients.

- To be readily involved in tender estimation, variation quotation and costing preparation and assist the project manager in the preparation of budgetary statement.

- Responsible for all correspondences with the clients, authorities, main-contractors, subcontractors, vendors, architects, consultants, etc.

- To be actively involved with quality management system of the company.

- Perform any other duties as assigned by higher management or superior.

Job Requirements:

- Degree or Diploma holder in Mechanical Engineering or equivalent.

- Have more than 3 years or dible experiences in ACMV system.

- Proficient in Microsoft Office, AutoCAD and BIM.

- Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment.

- Strong analytical and problem-solving skills, with the ability to identify and resolve complex issues.

We regret that only the shortlisted candidates will be notified

Responsibilities

• Assist/support Topsides Engineering Project Manager in managing engineering work including engineering deliverables, man-hour and schedule control, mainly in multi-disciplinary topsides design related activities and to ensure work performed on the project is in accordance with company quality, systems and safety requirements;
• Understand the contract and scope of work for topsides with sub-contractor;
• Prepares key project documentation as per project specification requirements;
• Manages project topsides related drawings and controls technical documentation across disciplines;
• Prepares schedule, pre-planning and resource forecasting for engineering and other technical activities relating to the project topsides design, ensuring all activities are kept within the project budget;
• Assist topsides EPM in organizing regular inter-discipline review meetings and interface checks.
• Participates in project meeting, reports on the project status and attends to basic technical queries and issues including reviewing the performance of vendors/ subcontractors in the project
• Liaises with customers, topsides design sub-contractor, vendors, consultants and cross-functional team to coordinate project plan and handles technical issues in order to meet the project schedule
• Assist topsides EPM to ensure Design Reviews conducted with appropriate attendees and manage the action register to monitor the close-out of identified action items.
• Support topsides EPM in identifying dependencies and obtaining alignment with project stakeholders to ensure safety and quality are not sacrificed in the effort to meet the project schedule.
• Collates project documentation and database from the project for submission and retention, as required and compiles the records from current and past projects as lessons learnt
• Review & comment the activities & deliverables list from each discipline, mainly the topsides design related activities & deliverables;
• Lead & co-ordinate between Hull’s Team, topside lead designers from every discipline, external design house (when applicable) & client (when applicable) to define the boundary for each module and boundary between topside & hull;
• Co-ordinate between discipline to utilize the shared license based-on work priority;
• Monitor & control the topsides design manhours based-on the available budget allocated by commercial team or as defined by discipline Lead Designer;
• Record & follow-up all the topsides design pending issues / problems highlighted by Lead Designers from every discipline, and report to Topsides Engineering Manager;
• Expedite the information required by each discipline prior to start & complete the topsides design works;
• Monitor 3D model clashing issues with other discipline;
• Prepare Weekly Report related to Overall topsides design Progress, Area of Concern, Pending Items, Clashes Register, Interface Register, Down Time Register, Available Resources against Planned Resources, Manhour Usage against Planned Manhour, etc & Action Plan & submit to Topsides Engineering Manager/Engineering Project Manager & GM;
• Lead topsides design review activities either internally with other discipline or externally with other parties (include client);
• Initiate, organize, participate, record & file the minutes of meeting with external parties (include client) for topsides design related activities;
• Prepare, update & monitor the topsides design Punch List & Hold List on weekly basis, especially related to external parties (include client);
• Support Project Planner in preparation of monthly or weekly report to client related to topsides design progress & status;
• Support Topsides Engineering Manager/Engineering Project Manager & commercial team for VO related to topsides design;
• Responsible for ensuring that all topsides design activities meet work scope & comply with Project Quality Plan.
• Liaises with Construction & Commissioning Team to ensure topsides design activities are in-line with Area or System Completion Priority.
• Understand and monitor all interfaces with Class Society (if topside is classed) / other regulatory bodies and Clients to ensure requirements are properly addressed and relevant documents are reviewed timely.
• Assist topsides EPM in preparing project close-out, including as-built documentation and engineering close-out reports.
• Tack and coordinate changes with Discipline Leads ensuring team members follow the management of change process (MOC); ensure recorded changes are followed through.
• Proactively identify and monitor areas likely to change to reduce the “surprise” element, added costs and delays to project.
• Coordinate the interfaces with subcontractors and third party consultants and ensure all changes are captured through MOC process

Requirements

• Minimum Bachelor Degree in Engineering;
• Minzmum 10 years working experience in offshore oil and gas project managing topsides design works;
• Able to liaise with internal and external parties;
• Able to comprehend the strategies, work methods, processes and systems in overall project execution and engineering execution of topsides design;
• Highly competent interpersonal and influencing skills to tactfully and diplomatically manage ambiguity, conflict and uncertainty in a culturally diverse environment.
• High awareness of safe working practices associated with design, construction, mechanical completion, pre-commissioning and commissioning of an oil and gas facilities.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control

· Develop & review electrical related drawings, e.g. Single Line Diagram, MCC Schematic, Equipment layout, Cable ladder/tray routing layout

· Knowledge in Onshore/ Offshore standards (IEC, NEMA, IEEE & API)

· Prepare Electrical Load Analysis & List

· Familiar with Short-Circuit and Voltage Drop calculation

· Prepare & review Electrical MTO for projects

· Review Electrical equipment’s datasheet

· Strong knowledge in Low voltage MCC/Switchgear, UPS, VSD/VFD & Transformers

· Prepare specification for LV Switchgear, MCC, Transformers & VSD/VFD’s

• Reviewing of customers' specifications and drawings
• Define specifications and scope of work to contractors
• Execution of projects.
• Startup, testing, commissioning and troubleshooting of plants.
• Develop engineering capabilities and work with sales team on project proposal and bidding

Requirements:

• Degree in Electrical Engineering or equivalent recognized by Professional Engineers Board (PEB) Singapore
• Able to read & understand line diagram and generate Bill of Materials from single line diagram
• Knowledge on control, schematics, motor controls and materials take-off
• Proficient in AutoCAD, Microsoft Office
• Knowledge in Mitsubishi / Siemens / Schneider / Omron PLC software would be an added advantage
• Able to take on numerous challenging tasks while simultaneously meeting high standards and deadlines / vision
• Able to communicate effectively in English at all levels, both verbally and in written reports

An attractive remuneration package, benefits and challenging working environment and excellent career growth in the company would be offered to the successful candidate. We regret only shortlisted candidate will be notified.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a MECHANICAL ENGINEER/ SENIOR ENGINEER to be part of our FACILITIES DEPARTMENT diverse team of talent. You will be responsible for HVAC systems, Clean Room, Building services and maintenance.

What you will be working on:

• To provide facilities support pertaining to Clean Room, Chillers and HVAC systems, Environmental Protection Systems, Process Utilities Supply Systems, Building Services and Maintenance, and other miscellaneous mechanical and facilities systems to wafer fabrication so as to ensure continuous supply of utilities and related facilities at the required performance level or specifications
• Formulate, implement, review and improve preventive and predictive maintenance programs for systems in charge so as to ensure that the systems function as intended at all times
• Carry out repair and troubleshooting of systems in order to restore systems to their operating conditions in the shortest possible time. Carry out root cause analysis and implement action plans to prevent recurrence
• Able to formulate effective reporting and tracking systems for monitoring of system performance and capacity usage. Recommend and implement improvement/enhancement projects where appropriate.
• Formulate, implement, review and improve operating procedures so as to ensure optimum operation of systems
• Monitor and review utility consumptions and work with users to implement projects to reduce the consumption where possible
• Knowledge of all relevant standards, legislations, codes of practice etc and ensure their compliance
• Provide guidance and training on the systems in charge to fellow colleagues so as ensure adequate working knowledge and system backup
• Ensure plant histories, drawings, data and other appropriate documentations are being generated and properly filed for future reference and review.
• Evaluate and recommend appropriate spares, consumables and other resources necessary for the day-to-day operation of the systems.
• Conduct project supervisions.

More About You:

• Master / Degree in Science, Mechanical Engineering, Building or equivalent. Preferred candidate with SCEM certification.
• 5 years of relevant working experience in semiconductor, pharmaceutical or petrochemical industry. Hands-on experience in day to day operation and maintenance essential.
• Experienced in managing cleanroom (Class 100 environment) systems
• Person shall act as SME for ACMV system. Person must have sound knowledge of operation and maintenance of Clean room areas and ACMV system
• Provide building services and maintenance, including building facilities repair and upgrading, housekeeping, landscaping and pest control.
• Knowledge of maintenance principles and good engineering practices.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You are responsible for identifying, assessing and advising on risks arising from the workplace health, environmental and/or work processes, recommending measures to eliminate or minimize and control the risks and implementing the measures.

Key Responsibilities

• Conduct job and environment hazard and risk assessments, perform workplace evaluations, and implement corrective and preventive actions
• Apply relevant licenses, conduct tests and provide necessary inspection reports on environment and safety to drive improvement
• Lead and continually review existing and new Fab processes and equipment for EHS compliance, including managing waste, air, water, chemicals, gas and others
• Manage semiconductor process safety, establish Environment, Health and Safety (EHS) culture, implement and enhance the EHS program for employees and contractors
• Perform regular and ad-hoc inspections. audits and supervise hazardous operations safely
• Lead and facilitate ERC (Emergency Response Committee) related activities such as factory emergency response, fire, gas leak and others
• Collaborate with relevant departments for ISO14001, ISO45001, ISO14064, and ISO50001 management systems certification and compliance
• Provide technical, regulatory and process guidance to address emerging EHS issues

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Engineering or Science background including Occupational Safety, Chemical Engineering or Chemistry, environmental science and emergency response or management
• Minimum of 3 years of experience in semiconductor, electronics manufacturing, or other chemically intensive manufacturing industries and regulatory compliance preferred.
• Possess industrial safety, environmental protection, and fire protection related certificates
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months

Key Skills and Attributes

• Strong analytical skills and able to work under pressure in a fast-paced environment
• Good interpersonal, leadership and communication skills to work effectively across functions and geographical teams with diverse background
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible for successful customers’ product full lifecycle, including but not limited to, technology transfers, new products introduction, device performance, yield, and reliability of our advanced technologies

Key Responsibilities

• Take charge for successful new products qualification and technology transfers from motherfab
• Complex data analysis to identify process design weaknesses and/or manufacturing tool issues.
• Design and execute experiments, analyse complex data sets and derive actionable insights to improve yield and performance for each specific technology and/or products
• Collaborate with the engineering teams to maintain process stability and provide technical solutions to customers

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Minimum of 4 years of experience in silicon process flow enhancements and managing process shifts, changes with design rules and product layout, ensuring optimal yield, electrical test and product performance with short-and long-term reliability implications considerations
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Engineer/ Senior Engineer to be part of our Photo Process department diverse team of talent. You will be responsible to sustain and improve all metrology tools and recipe indices to meet operations goals

What you will be working on:

• Optimize process capability to meet operation needs
• Perform Shift duties to support production
• Implement projects to upkeep process capabilities and reliabilities
• Troubleshoot process issues, establish Best known methods for future reference.
• Monitor and control process performance indices such as Cpk
• Work as a team with both equipment and manufacturing Engineers to meet module objectives
• Start-up new equipment processes which involves process characterization and development
• Establish and maintain a good audit system for both internal and QA audit on process documentation.
• Troubleshoot out-of-control situations and decide on the lot disposition in an out-of-spec situation.

More About You:

• Bachelor Degree in Engineering, Science or equivalent
• 1-3 years experience in semiconductor manufacturing environment. Fresh graduates with keen interest to develop a career in semiconductor manufacturing environment are welcome to apply.
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes.
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Posses logical thinking skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

• Progressing all elements of design in-line with the Design Checklist;
• Prepare electrical tender packages including specification and drawings;
• Responsible for ensuring to remain familiar with current practices and engineering trends within the industry and to remain technically competent;
• Tendering and estimating of electrical works for projects prior to award;
• Compilation and Review of Operation and Maintenance Dossier for Projects.

Elsa Fontanne (CEI No. R24124496)

Recruitment Consultant

Contact Number: 67860100

Email Address: [email protected]

Recruit Express Pte Ltd / EA Licence No: 99C4599

We regret only shortlisted candidates will be contacted

Our Client is in the Manufacturing Industry. Due to their current expansion plan, they are looking for a Manufacturing and Production Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities

• Offer continuous technical support to contract manufacturers, resolving electronic engineering issues encountered during production.
• Work closely with manufacturers to establish and uphold rigorous quality control standards, ensuring reliable and consistent product performance.
• Analyze manufacturing workflows to identify and implement process improvements that boost efficiency and productivity.
• Address and resolve electronic engineering challenges to prevent production delays and minimize defects.
• Collaborate with design and development teams to implement design enhancements that improve product quality and streamline manufacturability.
• Coordinate investment audits with cross-functional teams, conduct regular physical asset inspections, and assist with annual inventory checks as needed.
• Any ad-hoc duty as given

Requirement

• Min Bachelor's degree in Electronic Engineer or a related field
• Min 4 years in EMS - Electronic device assembly
• Good understanding in overall supply chain, manufacturing technology, process set-up, process validation and SOP support
• Knowledge and experience in manufacturing, planning, quality, SAP, PLM
• Knowledge and experience in wearable electrical device's assembling
• Comfortable to travel overseas often

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Job Duties:

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
• Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
• Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.
• Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes and involved in test.

AM Shift (7AM to 430PM)

PM Shift (430PM to 130AM)

EA License No. 01C4394 • RCB No. 200007268E • Lim Jia Jie EA Registration No. R22108969

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tacand the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries.

Responsibilities:

Compensation and Benefits

• Oversee and be responsible to ensure compliance to all legal statutory regulations and head quarter’s requirements in C&B function e.g. MOM and employee related, RBA etc .
• Ensure competitiveness in compensation with benchmarking with companies in manufacturing/ contract manufacturing/ semicon industries.
• Plan and oversee that the yearly merit increment and appraisal process is executed and completed timely.
• Propose competitive compensation package for salary adjustment including promotion and upgrade cases.
• Execute bonus planning proposal and oversee the payout activities are done in accordance to guideline and approved budget.
• Drive and participate in annual budgeting exercise.
• Maintain current knowledge on market issues and changes in government regulations affecting Company compensation and benefits system.
• Develop and maintain HR related procedures and document for this process.
• HRI and HRMC Liaison.
• Drive or implement continuous improvement practices and HR projects in the organization.

Training & Development

• Provide guidance to HR Administrator in aspect of Training & Development
• Oversee the training and development needs of employees to enhance overall skills and career development with the aim of attaining business objectives.
• Source, recommend programs and identify training needs analysis using the competency model.
• Act as an internal consultant to build and facilitate the implementation of learning and development solutions.

Requirements:

• Degree holder preferably in HR Management.
• Minimum 5 years in managerial capacity and preferably in manufacturing environment.
• Knowledge of Singapore employment laws and regulations, HR best practices, C&B analysis and training related function.
• Strong analytical, interpersonal and communication skills (oral and written).
• Meticulous, flexible, open-minded and possesses positive attitude.
• Hands-on and be able to engage the teams.
• Knowledge and experience in handling Responsible Business Alliance (RBA) requirements is an advantage.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format or please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lee Jun Siong (Johnson)

EA Personnel Reg No: R24120242

Job Title: Manufacturing Admin ID9014
Location: Tuas
Working Hours: Monday to Friday: 8am-5.15pm
Basic Salary: $2200-$2500
Gross Salary:2500-3300

Benefit:
*AWS, 10 days AL
*Company Transportation provided at Lakeside MRT

Job Description:
• Work closely with supervisor/manager to ensure production planning run smoothly and give support to the team.
•Coordinator between Admin and QA for any production issue.
•Ensure production output data are accurate and perform monitoring check.
•To be responsible of production data collection and data entry.
•Data key in for raw material withdrawal record, finished goods production.
•Ensure all the inspection record by production operators are accurately and comply with requirement

Requirement:
Min 1 year admin experience.

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

• Working Days: Monday – Friday
• Working Hours: 08:00am - 05 :00pm
• Location: Taman Jurong
• Salary: $2,800 - $3,000 + $90 Transport Allowance

Responsibilities:

• Process monthly payroll and overtime payments.
• Handle employee work pass applications and cancellations
• Manage the onboarding and offboarding process
• Assist with recruitment activities such as posting job openings, screening resumes, and scheduling interviews.
• Ensure timely tax clearance for employees.
• Manage insurance claims for employees, including medical and accident claims.
• Perform other HR-related tasks or projects as required.
• Issue uniforms to new employees during onboarding and manage uniform inventory.
• Perform general office administrative duties such as filing, organizing, and managing office supplies and stock.

Requirement:

• Minimum Diploma in Human Resource or a related field
• At least 1 year of relevant experience

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Job Responsibilities:

• Directs, manages, and optimizes two plants or production facilities’ overall operations and financial performance (P&L)
• Sets policies and procedures that guide plant operations' productivity, quality, and cost efficiency
• Organize the factory's mid-to-long-term plan and annual work plan
• Take overall responsibility for the management and formulation of the factory’s production line
• Ensure the production progress, and be responsible for the company's total production capacity, quality, and production efficiency
• Systematically collects operational metrics to analyze productivity and set performance targets to meet revenue and cost goals
• Supports the development and deployment of manufacturing practices focused on quality and continuous improvement
• Approves policies developed within various sub-functions and departments
• Direct Operations by ensuring that teams work closely to analyze the demand and develop production strategies, including supply chain, product rationalization, material flow, information flow, manpower staffing, and equipment to meet Customer requirements
• Troubleshoot process-related problems and formulate a corrective action plan to avoid recurrence of shortcomings in the processing line.
• Drive industrial relations harmony and accountability for all plant KPIs and ensures adequate training and development at all staff/operations levels
• Oversees multi-functional plant teams including finance, engineering, materials, quality assurance, and human resources
• Take on other responsibilities as may be reasonably assigned to you by your superiors from time to time

Job Requirements:

• Tertiary education
• Willing to be based in Vietnam. Prior experiences based in China or overseas will be preferred
• At least 10+ years of experience in manufacturing and has a deep understanding of factory production and manufacturing management processes, management methods and models
• Familiar with products in the fields of furniture/kitchen cabinet (sofas / wood / textiles) will be an advantage
• Familiar with the requirements of the quality management system
• Proficiency in English and Chinese communication and writing as required to liaise with China manufacturing plants as well
• Strong analytical, leadership, and communication skills
• Possess strong business acumen and operations process driven
• Strong stakeholder management capability

Interested candidates, submit MS Word resume to [email protected] or contact +65 62251232

• Responsible for the supply and demand planning activity within the SEA region.
• Identify appropriate planning categories for the varied portfolio.
• Create timely trend analyses, insights and business recommendations.
• Carry out regular risk assessment for the demand and supply planning functions.
• Monitor and review any gaps in the performance of a portfolio of suppliers and recommends improvements by suppliers to better meet demand requirements.

Requirements:

• Degree in Supply Chain Management or equivalent
• At least 5 years of experience in Supply Planning function in the Manufacturing industry of Marine/Defence/Aerospace.
• Excellent leadership and organizational skills.
• Proficient in MRP system and MS Excel.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

LOCATION: JURONG
WORKING TIMING: 8.30AM-5.30PM (5DAYS WORK WEEK)
ACCOUNTS ASSISTANT ($2,500 - $3,000)

JOB DUTIES & RESPONSIBLITIES:

1. Preparing and processing invoices, payments, and other accounting transactions in a timely and accurate manner
2. Preparing stock inventories, conduct stock take on monthly basis, stock reconciliation
3. Preparing tax computation for GST
4. Reconciling bank statements and maintaining accurate financial records
5. Assisting with the preparation of monthly and annual financial reports
6. Providing administrative support to the accounting team, including data entry and filing
7. Prepare audit schedules and fixed asset schedule
8. Liaising with internal and external stakeholders to resolve any accounting-related queries or issues
9. Ensuring compliance with relevant financial regulations and company policies

Skill/Experience
* Minimum of 1-2 years of experience in an accounting or finance-related role
* Strong attention to detail and excellent numerical skills
* Proficient in the use of accounting software and Microsoft Office applications
* Good communication and interpersonal skills, with the ability to work collaboratively in a team
* Ability to work under pressure and meet deadlines
* Relevant accounting qualifications

*Able to start work within short notice will be highly advantageous.*

Please be notified that only shortlisted candidates will be notified

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: YEO AHN AHN

EA Personnel No: R22109014

EA License No: 21C0845

Responsibilities:

• Oversee inventory to meet production demands and avoid shortages.
• Collaborate with internal teams and suppliers to ensure timely material delivery.
• Adjust production schedules as necessary to meet deadlines.
• Ensure product quality by working closely with the testing team.
• Schedule production staff according to workload requirements.
• Utilize ERP/MRP systems for streamlined planning and scheduling.
• Supervise production staff for effective task completion as required.

Requirements :

• Diploma in Manufacturing Engineering or equivalent.
• At least 1 year of working experience in electronics manufacturing.
• Experienced in material planning, inventory management, and proficient in ERP and MRP systems.
• Possess leadership and supervisory skills.

_________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Well Established Medical Devices Manufacturing Company
• Basic $2200 - $3000 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working hours: 12 Hours Shift

Job Responsibilities:

• Carry out inspection of incoming materials and finished products according to operational instructions to ensure that materials or products meet the requirements
• Ensure product identification is correct and stored in the correct location, maintenance of inspection equipment and daily monitoring of production environment
• Statistics on the quality status of incoming materials and processes and the quality of shipped products
• Assist in customer complaint analysis and take corresponding improvement measures
• Ensure records comply with good writing practice GDP requirements
• Assist the superior to complete other tasks

Job Requirements:

• At least 1 year of quality management experience and basic computer software
• Blueprint reading capabilities, and ability to use measuring devices like gauges, meters, calipers

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Location: Senoko Drive
• Working Days: Mon to Fri: 8am to 5:30pm
• Candidate willing to work overtime on weekdays until around 8pm and weekends (Saturday and Sunday)
• Basic Salary : $1050

Job Description:

1. Operating of manufacturing machinery.
2. Set up of machines to begin production run.
3. Verification of materials and tooling.
4. Ensuring that products produced comply with quality standards.
5. Logging of production data for record keeping.
6. Maintaining good housekeeping at work stations.

Requirements:

• Minimum Experience of 2 years with cable extrusion machine for power cables size 1.5mm2 and above in cable manufacturing company.

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

• Working Days: Monday – Friday
• Working Hours: 08:00am - 05 :00pm
• Location: Taman Jurong
• Salary: $2,800 - $3,000 + $90 Transport Allowance

Responsibilities:

• Process monthly payroll and overtime payments.
• Handle employee work pass applications and cancellations
• Manage the onboarding and offboarding process
• Assist with recruitment activities such as posting job openings, screening resumes, and scheduling interviews.
• Ensure timely tax clearance for employees.
• Manage insurance claims for employees, including medical and accident claims.
• Perform other HR-related tasks or projects as required.
• Issue uniforms to new employees during onboarding and manage uniform inventory.
• Perform general office administrative duties such as filing, organizing, and managing office supplies and stock.

Requirement:

• Minimum Diploma in Human Resource or a related field
• At least 1 year of relevant experience

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

This position requires the individual to performs electro-mechanical assembly operations, troubleshooting, repair & maintenance and testing of pneumatic systems/machine.

Duration: 12 months contract

Location: Upper Changi

Day Shift – 7.00am - 4.30pm

Noon Shift – 430pm to 130am ($25 Per Shift and one way transport home)

Job Duties:

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
• Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
• Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.
• Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes and involved in test.

Interested candidates may apply through the application system. We regret to inform that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• Reg. Reg No: R23117785 (Lok Ding Hann)

• Well Established Company
• Salary $2000 - $2500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Aljunied
• Working days: Monday to Friday
• Working hours: 8:30am – 6pm

Job Responsibilities:

• Operate CNC and conventional milling machines and grinding machines
• Programme CNC milling machines based on 2D drawings, 3D models and specifications
• Set up CNC and conventional milling machines by installing fixtures, tooling, and workpieces according to job requirements
• Maintain operationality, safety and tidiness of shop floor independently
• Any other ad-hoc duties as assigned

Requirements:

• Possess minimum GCE O Level with at least 1-2 years of experience in operating CNC Milling / Lathe Machines / Grinding / Drilling machines

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

• Salary : SGD3,500 - SGD 4,000
• Working hours: Monday - Friday 830am to 6pm
  (once a month half Saturday 9am to 12pm)
• Location: Woodlands

Job Responsibilities

• Update and maintain the company website to ensure accurate and engaging content
• Develop, create, and track social media content to enhance brand visibility and engagement
• Developing Marketing Materials such as brochures, posters, video and website content
• Support the planning, organization, and execution of events/exhibition in alignment with approved Marketing plans
• Maintain and track inventory for Marketing and promotional Materials such as brochures, namecards and corporate gifts
• Keep organized records of contacts related to exhibitions and events
• Liaise with vendors to produce artwork, promotional materials, and supplies
• Managing website content to fully utilize the website platform to market (create, update, and upload information)

Job Requirements

• Proven experience in a marketing role, preferably within the Semiconductor industry
• Diploma or relevant cert in relevant field

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Our client is a Manufacturing MNC. Due to business needs, they are now recruiting a Sales Coordinator to be part of their Sales Team for ongoing transformation projects. They are located in the West - easily accessible.

Duties of Sales Coordinator:

• Accurately process sales orders in the system, ensuring correct product details, pricing, and customer information.
• Prepare and maintain sales documents, including quotations, invoices, contracts, and sales reports.
• Assist the sales team in preparing presentations, proposals, and any other necessary documents.

Requirements:

• Relevant experience
• Experience with SAP or ERP System

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De