Roles and Responsibilities

• New hired technician onboarding, team integration and On-The-Job training management and skills upgrading for competent existing technicians.
• Track, share and manage individual technician labor utilization, efficiency, all type of leaves and time attendance with further development plan.
• Together with production planners define the daily/ weekly overtime requirements based on each work station Work-In-Process Inventory, customers order promised date requirement.
• Attend daily Cell Control Center meeting and support Safety, Quality, Delivery, Cost out and other metrics base on exceptions with alternative resolutions to the potential and missed goals.
• Daily facilitator stands up meeting on manpower deployment across teams within business and/or cross functions support.
• Technician recruitment – Interview to hiring and onboarding.
• Prompt teaching, mentoring, coaching and performance counseling for under-performing technician.
• Technician disciplinary action, PIP ( Progress Improvement Plan), and annual appraisal.
• Drive engagement, empowerment for Self-Directed Work Team environment. A culture ambassador.
• Participate in People Activities/Community Work/Woman Network etc.
• Perform weekend/PH facilitator duties (rotation)
• Continual horizontal growth assignment assigned by Business Leader. ​

Required Qualifications/Requirements

• Degree or Diploma in Engineering from a local or internationally recognized university or polytechnic
• 3-5 years in a similar capacity
• Previous experience within Aviation or electronics manufacturing.
• Previous experience in Lean Concepts
• Managing a team of 50 technicians

Desired Characteristics

• Humble: respectful, receptive, agile, eager to learn​
• Transparent: shares critical information, speaks with candor, contributes constructively​
• Focused: quick learner, strategically prioritizes work, committed ​
• Leadership ability: strong communicator, decision-maker, collaborative​
• Problem solver: analytical-minded, challenges existing processes, critical thinker

Essential Responsibilities:

• Lead the daily production meetings to assess daily capability to meet Safety, Quality and Delivery objectives.
• Ensure manpower and machine capacity is available and assigned to support schedule.
• Proactively work with other team leaders to cross deploy workers to support the needs of each other’s cell.
• Identify production bottlenecks in Gate/Cell, understand available capacity and ensure bottlenecks are continuously in production to maximize cell output,
• Develop and maintain skill matrix for cell that documents skill level of each employee and ensures a cross-training plan is in place to support volume growth,
• Work with Engineers and Lean Specialists to implement quality/productivity/ cost-out/yield improvement projects in the Cell.
• Work with Engineers and Lean Specialists to implement quality/productivity/cost out/yield improvement projects in the Cell.
• Handle day to day people issues - turnover, recruitment, disciplinary investigation & execution, tardiness, accident or incident investigation. Track and coordinate appraisal of technicians.

Qualifications / Requirements:

• Bachelor's degree from an accredited university (with at least 3 years if experience in similar capacity) Or
• Diploma in Engineering from an accredited polytechnic (with at least 5 years of experience in similar capacity)

Desired Characteristics:

• Strong interpersonal and communication skills
• Ability to work independently.
• Strong problem solving skills.
• Knowledge of Work Teams, multi-skill training and Lean
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes, critical thinker

Responsibilities

• Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies
• Interfaces with other engineering functions to coordinate the release of product improvements and/or new products
• Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products
• Uses basic engineering and DFx principles to estimate and reduce manufacturing and/or product costs and improve delivered product quality; determines time standards and makes recommendations for tooling and process requirements
• Writes and releases test procedures
• Gathers operational and test data and evaluates results
• Evaluates work methods, procedures and policies
• Assists in determining root cause analysis for issues that arise during assembly and/or test of systems

Requirements

• Bachelor in Engineering
• Demonstrates conceptual knowledge of theories, practices and procedures within a discipline
• Applies general knowledge of business developed through education or experience
• Uses existing procedures to solve standard problems; analyzes information and standard practices to make judgments
• Works within standardized procedures and practices to achieve objectives and meet deadlines
• Exchanges straightforward information, asks questions and checks for understanding

* Please apply with detailed CV with current and expected salary, and notice period

* Only shortlisted candidates would be notified

Key Responsibilities

Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies.

Interfaces with other engineering functions to coordinate the release of product improvements and/or new products. Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products.

Estimates manufacturing costs, determines time standards and makes recommendations for tooling and process requirements. Uses DFx principles to reduce manufacturing and/or product costs, and improve delivered product quality.

Develops and uses test procedures, including assisting with the definition of test specifications with design / software engineering. May work with test engineering on the design and development of text fixtures. May assist in the coordination of test fixture sourcing activities.

Gathers operational and test data and evaluates results; may takes corrective/continuous improvement actions.

Evaluates work methods, procedures and policies. Participates in the development and maintenance of new and existing business processes; updates as necessary to ensure current practices are documented.

Determines root cause and corrective action analysis for issues that arise during assembly and/or test of systems; provides failure analysis report as required.

Performs Process Failure Mode, Effects and Criticality Analysis when working with New Product Development.

Functional Knowledge

• Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities

Business Expertise

• Understands key business drivers; uses this understanding to accomplish own work

Leadership

• No supervisory responsibilities but provides informal guidance to new team members

Problem Solving

• Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents

Impact

• Impacts quality of own work and the work of others on the team; works within guidelines and policies

Interpersonal Skills

• Explains complex information to others in straightforward situations

• Perform full payroll process (include IR8A submission and IR21 tax clearance) for around 40 pax.
• Preparation and perform government related transactions/submission such as work pass administration, labour surveys, foreign worker levy wavier, licenses etc.
• Prepare HR related documents.
• Serve as point of contact on HR-related queries.
• Responsible for full recruitment process from job posting till on-boarding.
• Manage insurance & claim.
• Liaise and manage vendors/tenants pertaining to office/building maintenance (e.g. office administration etc.)
• Provide administrative support pertaining to welfare and workplace safety.
• Manage and coordinate travel arrangement.
• Provide administrative support and assist in other duties assigned by supervisor as and when necessary.

Requirement

• At least 2 years of working experience in related field.
• Proficient in Microsoft Office.
• Knowledge in Easypay payroll software will be an advantage.
• Able to converse and write Mandarin to manage Chinese-speaking workers.

Career Level :Junior Executive

Qualification : Diploma /Bachelor in Human Resources/

Business Administration

Years of Experience : 1 year

Job Type : Full-Time

Job Specializations : Admin/Human Resources, Clerical/Administrative Support

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

About the role

Perform the Manufacturing Engineering activity in Engine Overhaul/Component Repair production areas. Act as Technical Authority, assuring the initial and continuing capability of the Production method to produce conforming product and ensuring the resolution of technical issues/problems/arisings to meet business and customer requirements for safety, cost, delivery rate and leadtime (SQCD). Support integration on all Manufacturing Engineering activities across the product lifecycle and through the supply chain.

Job Description

• HSE – Practice full compliance to Health, Safety & Environmental Standards and meet the expectations of the Zero Harm programme.
• Product Safety – Understand product safety risks and work on mitigation to meet the required safety levels supporting requirements of the Company’s Safety Management System.
• Quality – Practice a culture of zero defects ensuring that manufacturing processes and methods within the business are developed and deployed to support Right First methodology. Support process and product related Quality investigation, and manage NADCAP accreditation.
• Delivery – Ensure that manufacturing processes and methods of manufacture within the business and suppliers are developed and deployed to support/deliver Right First Time manufacture using SPS, DMAIC and System Engineering tools. Manage FAIR/MSA activities and Source & method change in the cell/area of accountability.
• Delivery – Review issues identified e.g. Troubleshoot Strip / Build, Balancing, Runout, In-situ repair, Component Repair processes and key equipment/toolings (ITT, VTL, BTG, Wash, FTB, CMM, etc), determine resolutions and reestablish the Standards.
• Cost – Support cell/area of accountability to meet cost targets e.g. productivity, CONQ etc.
• Standards – Deploy and sustain the SAESL Operating System Standards by working with the Cell/Area CFT, and where applicable with the suppliers. Identify opportunity to improve the Standards.
• Technical Authority – Specify Manufacturing Engineering and process requirements and make technical decisions in relation to the cell/area of accountability.
• Lean/Improvement – Identify requirements for improvements and innovations in manufacturing processes and methods of manufacture within their cell/area of accountability. Prioritise and promote launch of new projects based on business case. Drive manufacturing processes towards identified best practice.
• Deploy capability (including NPI) – Responsible for production readiness of new product manufacturing capabilities or methods of manufacture. Develop numerate, real time methods for capturing process capability, and ensure it is available and acted on within the facility/supply chain. Maintenance of Production Technical Packages (technical instructions, programmes, tooling, etc) for all parts/assembles which clearly define the manufacturing process ensuring manufacturing processes and/or methods of manufacture meets the requirements for quality, cost, delivery rate and lead time.

Requirements

• Degree in Aeronautical / Manufacturing / Mechanical / Industrial Engineering discipline (Candidates with Diploma in Aeronautical / Manufacturing / Mechanical / Industrial discipline and relevant experience may be considered).
• Fresh graduates may be considered.
• Good knowledge of high bypass gas turbine engines.
• Good knowledge of material and component repair processes (e.g. Welding, Machining, Painting, Coating, etc).
• Good communication, analytical, engineering and project management skills.
• Good technical problem-solving skills (Six Sigma) and hands-on approach.

About SAESL
A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.
• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL
• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities
• Manage the acquisition, delivery and commissioning of capital equipment, turnkey solutions and ancillary fixtures/ tooling
• Industrialize adaptive manufacturing capability through the development of new process and procedures
• Manage the transfer of new products and know-hows from pre-production site to manufacturing site for mass production. Successful candidate will be expected to be posted overseas for training and technology transfer
• Implement and deliver new repairs by designing and fabricating new repair fixtures/ tooling; developing process parameters; and validating repair setup through First Article Inspection
• Provide technical assistance to all functional departments to meet business objectives
• Effectively apply process control (SPC) to monitor, analyze and define errant processes; and to refine processes to reduce variability
• Function as on-site technical authority and liaise with technical specialists for CAM and non-contact measurement related repair processes.
• Lead and own CAM and non-contact measurement activities
• Any other duties as assigned by supervisor


Requirements
• Bachelor's Degree in Manufacturing, Material Science, Mechanical Engineering or related field
• Possess knowledge (theory and practical) on digital manufacturing and conventional machining
• Experience in operating non-contact measurement equipment and Siemens NX multi-axis manufacturing module
• Understanding of common component repair processes (welding, heat treatment, NDT) and familiarity with digital manufacturing and/or proficiency in CNC programming is an advantage
• Ability to read and understand manufacturing drawings and GD&T
• Able to multi-task and work well under pressure as an individual/ team
• Possess good communication, analytical , engineering and project management skills
• Good technical problem solving skills, takes ownership and hands-on approach

Apply Here --> https://saesl.applyourjobs.com/

About SAESL
A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.
• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL
• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities
• Manage the acquisition, delivery and commissioning of capital equipment, turnkey solutions and ancillary fixtures/ tooling
• Industrialize additive manufacturing capability through the development of new process and procedures
• Manage the transfer of new products and know-hows from pre-production site to manufacturing site for mass production. Successful candidate will be expected to be posted overseas for training and technology transfer
• Implement and deliver new repairs by designing and fabricating new repair fixtures/ tooling; developing process parameters; and validating repair setup through First Article Inspection
• Provide technical assistance to all functional departments to meet business objectives
• Effectively apply process control (SPC) to monitor, analyze and define errant processes; and to refine processes to reduce variability
• Function as on-site technical authority and liaise with technical specialists for laser-related processes.
• Lead and own laser blown powder deposition activities
• Any other duties as assigned by supervisor



Requirements
• Bachelor's Degree in Manufacturing, Material Science, Mechanical Engineering or related field
• Possess knowledge (theory and practical) on laser cladding (solid state lasers and blown powder laser) and metallurgical characterization
• Understanding of common component repair processes (welding, heat treatment, machining, NDT) and familiarity with digital manufacturing and/or proficiency in CNC programming is an advantage
• Experience in beam characterization using commerically available equipment
• Ability to read and understand manufacturing drawings and GD&T
• Able to multi-task and work well under pressure as an individual/ team
• Possess good communication, analytical , engineering and project management skills
• Good technical problem solving skills, takes ownership and hands-on approach

Apply Here --> https://saesl.applyourjobs.com/

Job Description

Key Responsibilities

1. Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
2. Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
3. Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
4. Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software
5. Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

• Implement Plant-Wide Automation, Process Flow and Workplace Layout.
• Manage Automation Line and Equipment.
• Provide technical support to production line and implement technical and maintenance procedures.
• Design of Layout, Mechanical Parts, Jigs and Fixtures using Solid Works.
• PLC programming on Omron NJ series or other brand. Lead & direct technicians on operation & trouble shoot of automation line & equipments.
• Documents & file process changes, start up forms, PM schedules, trouble shooting & service records, etc.
• Leads & drives Engineering changes & improvement projects with internal & external customers.
• Manages equipment yield, cycle time & output of production line.
• Manage automation and equipment spare parts.
• Perform other tasks as assigned by the supervisor.

Requirements

Education

• Diploma / Degree in Engineering.

Experience

• Minimum 2 years’ of relevant working experience.

Skills

• PLC programming on Omron NJ series or other brand.
• Solid Works.
• Problem Solving skill.
• Critical Thinking and Coaching Skills.

Key Responsibilities

1. Utilizes work orders, schematics, wiring diagrams, engineering specifications, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
2. Performs a wide variety of electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
3. Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
4. Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software
5. Checks own work for conformance to specifications. Good working knowledge of job assignments. Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform build, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Functional Knowledge

• Has developed proficiency in a range of analytical processes or procedures to carry out assigned tasks

Business Expertise

• Has a good understanding of how the team integrates with others to achieve objectives

Leadership

• May provide informal guidance and support to more junior team members

Problem Solving

• Provides solutions to problems in situations that are atypical or infrequently occurring based on existing precedents or procedures

Impact

• Impacts the quality of own work and its contribution to the team

Interpersonal Skills

• Uses communication skills to regularly exchange information

Barnes Aerospace, a business of Barnes Group Inc. (NYSE: B) is an international manufacturer of precision-machined and fabricated components and assemblies for original equipment manufacturer (OEM) turbine engine, airframe and industrial gas turbine builders throughout the world, and for the military. Barnes Aerospace also provides jet engine component overhaul and repair (MRO) services for many of the world's major turbine engine manufacturers, commercial airlines and the military. Additionally, we manufacture aerospace aftermarket spare parts and provide repair services for aerospace engine components. Barnes Aerospace provides a total solutions package to our customers that leverages the synergies between our OEM and MRO businesses to address complex aerospace customer needs and support products through the entire lifecycle.

Barnes Aerospace Singapore, with legal entity name - Windsor Airmotive Asia Pte Ltd in the Accounting and Corporate Regulatory Authority (ACRA), is a leading provider of Maintenance, Repair, and Overhaul (MRO) services and spare parts for many of the world's major turbine engine manufacturers, airline operators, and third-party providers. The Barnes Aerospace Singapore OEM Division is a world-class provider for Original Equipment Manufacturer (OEM), specializing in precision stamped assemblies and tight tolerance machining, serving a robust global customer base throughout the aerospace industry. To learn more about Barnes Aerospace, please visit www.onebarnes.com.

Core Responsibilities:

• Manage and plan manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• Develop new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Design toolings, fixtures and gauges.
• Establish Advanced Product Quality Planning (APQP); conduct pre-production pilot run and training for associates.
• Provide technical support to Production to achieve technical and quality requirements.
• Liaise with OEM on product requirements, process qualifications and technology development.
• Lead/Support continuous improvement projects through Barnes Enterprise system.
• Support Request for Quote (RFQ) proposal development and process
• Multi-task other engineering-related duties as assigned.

Qualifications:

• At least 3 years’ experience in precision engineering/aerospace component manufacturing or mass manufacturing. Competent with CAD software; Siemens NX Unigraphics preferred.
• Experience with CNC machining and programming using CAD/CAM.
• Good knowledge of tool and fixture design.
• Proficient at reading, analyzing, and interpreting customer drawings, specifications, procedures, and standards.
• Good project management, analytical and problem-solving skills.
• Good interpersonal and communication skills with the ability to interface with all levels of people.
• Knowledge of IoT sensors/gateways, hardware testing and troubleshooting.
• Familiarity with special processes such as heat treatment, welding, non-conventional machining.

Education Requirements:

• Degree in Mechanical/Manufacturing/Aeronautical Engineering or Diploma holders with minimum 5 years’ experience.

Job Description:

• Attend to daily production technical issues related to processes as to ensure smooth production flow
• Lead, co-ordinate and execute continuous improvement in the workshop
• Attend to all quality issues and work with Quality Assurance Department to resolve / contain problem using Plant Lean methodology (QRQC)
• Work closely with the Engineering and R&D departments to transit new processes/ technology and transfer into production line on time
• Embarks on productivity, quality & cost reduction program
• Drive toward company KPI (Key Performance Index) and internal PPM target
• Able to solve problems systematically through the different methodology (PDCA -TPM, QRQC, SMED & Six Sigma)
• Familiar with process improvement tools including FMEA,SPC, etc
• Provide training to employees on procedures/ processes
• Manage a team of 4 technicians and the progression plan of the technicians

Job requirements:

• Degree in Mechanical/ Mechatronic with 3 years’ experience in Semiconductor/ manufacturing plant, production lines
• Able to communicate effectively with different levels and functions
• Strong planning and organizational skills
• Assertive, result-oriented with good leadership skills
• Possesses good perseverance and the ability to see things through attitude
• Possesses a sense of urgency and have good adherence to timeline in completing tasks and projects

Job Description

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Job Description

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Job Description

Key Responsibilities

• Intermediate knowledge of NPME role. Independently develops, implements, and releases new product BOMs for complex modules and product structure. Works with key stakeholders to develop and implement new product manufacturing, test, and sourcing strategies.
• Manages the development and validation of Operation Method Sheets (OMS) for medium complex modules.
• Performs 3D solid model virtual analysis process, including Master Layout (MLO) and Digital Mock Up (DMU). Actively participates in design reviews, providing DFA, DFAe, DFTp, ITO, and operational efficiency improvement feedback to new product development team to drive cost, quality, and cycle time goals.
• Orchestrates change requests and executes change control processes including Non Standard Requests (NSRs), Engineering Change Orders (ECOs), Change Control Board (CCB), Supplier Problem Sheets (SPSs), Engineering Specification Waivers (ESWs).
• Documents product-related issues/enhancement opportunities and performs Root Cause Corrective Analysis (RCCA). Leads the disposition and resolution of issues requiring Long Term Corrective Action (LTCA) for project/program.
• Leads the managed build process for programs/projects.
• Provides technical support and training to Applied and contract manufacturing resources, including piece part suppliers related to new product introductions.
• May perform other duties as assigned.

Requirements:

• Strong understanding of engineering principles, manufacturing processes and design for manufacturability.
• Ability to identify and solve manufacturing and production related problems effectively.
• Ability to exercise judgement based on the analysis of multiple sources of information.
• Curiosity-driven learning and improvement with engineering skills.
• Willing to adapt to changes quickly in fast-paced environment, stay updated with work process.
• Familiarity with product assembly process, and bill of material.
• Experience in model based CAD software.
• Knowledge of product development and its lifecycle.
• Ability to manage projects, set deadlines and work within constraints to complete successfully.
• Strong communication skills to collaborate with team members.

Desired Skills:

• Familiarity with various manufacturing processes such as machining, molding, casting.
• Experience as design, or new product manufacturing or manufacturing engineer.
• Advanced skills in Microsoft Office and Teams.
• Proficiency in model based CAD software.

Education:

• BS in engineering, applied physics or other related field.
• 2 to 7 years of experience is desired.

Job Description

· Handle sales activities/quotations for assigned account.

· Handle and grow existing customers / new development customers (Machining and contract Manufacturing) with strategic growth of 15% - 20%.

· Manage customer account status & credit control for assigned account.

· Achieve assigned sales target and consistently follow up for purchase order after quotation is submitted to customer.

· Work with cross functional departments for customer request /new RFQ as per SOP0038.

· Review order fulfilment as per SOP0039 and back-up support for sales co-ordinator in order fulfilment that enable smooth daily operations.

· Maintain & service customer satisfaction as per SOP0040.

· Review consolidation of pricing & forecasting and work with customers in fulfilling the forecast.

· Participate in weekly / bi-weekly / monthly sales call with customers with the aim to ensure business needs are on schedule and to arrest any potential / new issues by customers relating to sales and revenue.

· Understand and work with multi-level Bill of Materials.

· Collaborating with the design, production, supply chain, engineering or R & D departments of the company to determine how products and services could be made or modified to suit the needs of the customer.

· Selling on technologically and scientifically company core capabilities to covert to product sales.

· Maintain and ensure Sales and Marketing annual operating budget did not exceed per HOD prevailing directive.

· Managing close relationship with various departments taking deliveries as top priority.

· Any other ad-hoc duties assigned by the supervisor.

Requirements

· Minimum Diploma in Mechanical/Manufacturing Engineering or its equivalent

· Minimum 1 year of relevant working experience.

Skills

1. Technical and Technological Skills

· Knowledge in Navision system platform.

· Strong oral and written communication skills.

· Basic MS Office proficiency.

· Provide quality customer service that meets customer needs and expectations.

· Able to accomplish sales-related reports and presentations.

2. Personal Qualities (Soft Skills):

· Customer-focused and results-driven.

· Able to work independently or with the team.

· Good communication and interpersonal skills in building and maintaining both internal and external relationships.

· Open to explore and decipher new things for professional growth.

RESPONSIBILITIES

Manufacturing/ Production Line setup, pre-qualification and maintenance.
Provide technical support to customer related to assembly/ manufacturing.
Develop process and generate work instruction.
Review drawing, customer specifications and Bill of Materials cleanup.
Assembly, test, and commissioning of highly automated industrial equipments.
Train, certify and monitor assembly technicians.
Develop necessary technical competencies and equipment capabilities to meet operational performance targets
Work and collaborate with Production to achieve the desired quality and output
Conduct MRB to review non-conformance parts disposition.
Design/Fabricate tools, jigs and fixtures.
In-process yield/reject/scrap rate monitoring.
Lead and drive the team to participate in all continuous improvement projects related to cost, quality, utilisation & productivity using Six-sigma or similar applicable technology such as Cpk, FMEA, Lean etc
Any other duties assigned by his/her superior / Manager.

REQUIREMENTS

Minimum three years of relevant experience in Equipment Manufacturing Industry preferably wire bonding Equipment (Ball Bonding/Wedge Bonding/Die Bonding)
Diploma in Mechanical/Mechatronics/Electrical Engineering or equivalent
Proficiency in equipment troubleshooting techniques
Strong problem solving and analytical skills with good knowledge of SPC
Good leadership / presentation / communication / team building skills
Ability to work proactively and to identify issues and propose solutions
Able to design and implement effective systems, processes and informatio/ reporting mechanisms
Experience in Lean Manufacturing and ISO system

Please indicate your current and expected remuneration.

Job Description

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

1. Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
2. Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
3. Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
4. Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software
5. Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Job Description

Responsibilities

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components
• Performs electro-mechanical assembly operations, troubleshooting and repair
• Identifies and corrects errors
• Observes all safety standards and maintain a secure, safe, clean and healthy work environment
• Attends required health and safety training and follows safety and security policies, procedures and practices
• Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept
• Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly
• Actively strives to prevent accidents and injuries
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components
• Enters data on computer terminal, such as progress, work expense and labor details
• May perform computer programming, repair or software
• Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects

Requirements

• Able to develop analytical skills and application of scientific methods to perform a variety of activities
• Has good understanding of how the team integrates with others
• Able to recognize and solve typical problems that can occur in own work area without supervisory approval and evaluate and select solutions from established operating procedures and/or scientific methods
• Good communication skills to exchange of information

*Please submit with detailed CV stating current, expected salary, and notice period

*Only shortlisted candidates would be notified

Job Description

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information