Working Location:Tai Seng
Working Days: 5 days (office hours)
Salary Range:$10,000 – $12,000

Job Requirement:

• ATE Test Program Design and Development for new products (Production and Characterization Test)
• Design/Develop Final Test Loadboard and Wafersort Probecard
• Perform Characterization Testing, prepare test specifications, define tests, conditions, criteria, etc.
• Solid digital and mixed-signal programming experience on ATE using C++/VB language, and scripting
• Monitor and manage production test yields, maverick lots, engineering lots, product test log maintenance, product data statistical process, characterization data process.
• Hands-on test debugging, RMA analysis, and improving test solutions (Hardware and Software)
• Establish cost-effective production test solutions
• Develop team technical competency.
• Build product test plan, schedule, resources requirement and project tracking and execution.
• Conduct product test and releases review, approve the test program releases.
• Maintain and improve the product test process.

Job Requirement:

• Minimum Bachelor's Degree in Engineering (Electrical/Electronics)
• Minimum 5-yrs ATE Test Program Development (C++ and/or VB)
• Experience in Test HW Development (Loadboard and Probecard)
• Good knowledge on manufacturing process (fab, packaging, test)
• Hands-on development experience is a must with Teradyne J750 ATE testers, IG-XL test programming
• Hands-on development experience with Chroma and other main stream testers.
• Project management skills and experience in people management.
• Preferred: Knowledge in AEC Q100 automotive qualification guidelines, experience in the automotive test flow, AEC Q100 data analysis, wafer and FT lot process.

Quah Siying (Jeslyn) R1982418

The Supreme HR Advisory Pte Ltd 14C7279

Authorities and Responsibilities

1. To organize, co-ordinate, check and ensure all production activities follow as plan.
2. Calculate machine cycle time and organize production schedule base on machine capacity and capabilities
3. Plan manpower resources and delegate machining job to machinist
4. Verify program issue to workshop
5. Analyze and provide solution to solve problems between programmer and production dept.
6. Analyze monthly machining and scrap report
7. Good supervisory skill, people skill and 5 ‘S’ housekeeping
8. Good writing and communicating skill
9. Good in mechanical process, such as machining process, H/T, jig and fixture etc.

Competence Requirements

• Preferred NTC 2 / Diploma in Engineering discipline or equivalent.
• Minimum 3 years of working in related industry, and having 2 – 3 years of supervisory experience and preferably with working knowledge in machining processes.
• PC literate
• Possess excellent interpersonal communication skills and is an effective team player who is also self driven with a strong achievement orientation.

• Design and develop ATE (Automated Test Equipment) programs for new products, covering both production and characterization testing.
• Engage in hands-on testing debugging, conduct RMA analysis, and enhance testing solutions for both hardware and software.
• Develop a test plan for the product, including scheduling, resource needs, and overseeing project tracking and execution.

Requirements:

• Degree in Electrical/Electronics Engineering
• At least 3 years of leadership experience in ATE test program development.
• Proficient in C++/ VB, ATE testers and Chroma.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at

www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Required Skill: SQL/Oracle and Unix

• Good experience in Unix/Linux and SQL/Oracle
• Experience in banking and Cards domain.
• Should have good functional knowledge and good communication & coordination skills
• Good Knowledge system/application log analysis
• Ability to effectively use complex analytical, interpretive, and problem-solving techniques.
• Verbal and written communication skills are vital.

Responsibilities

• Oversee the entire recruitment process, including job fairs, employee engagement, and other HR projects.
• Collaborate with department heads to understand their staffing needs and ensure those requirements are effectively met.
• Ensure all hiring practices comply with fair employment guidelines and promote equal opportunities.
• Manage onboarding and exit procedures to facilitate smooth transitions for employees.
• Build and maintain partnerships with educational institutions to support talent pipelines.
• Generate and update various HR reports to provide insights and support decision-making.
• Assist with day-to-day HR operations and provide support across various HR functions.
• Perform any other tasks as required by the HR department.

Requirements:

• Bachelor’s degree in Human Resources, Business Administration, or a related field.
• Minimum of 3 years of experience in recruitment/talent acquisition and HR Operations within a multinational organization, with exposure in managing high-volume hiring.
• Proficiency in Microsoft Office Suite, with strong expertise in Excel.
• Exceptional communication and interpersonal abilities, capable of working effectively with all levels of staff.
• Detail-oriented, highly organized, and a resourceful team player with a strong sense of urgency.
• Capable of managing a demanding workload with a hands-on approach.
• High ethical standards in handling sensitive and confidential information.
• Flexible, self-driven, and capable of working independently with minimal supervision.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QXVY58RR

Responsibilities

• Service, upsell and built rapport with existing customer accounts within semiconductor industry
• Create targeted marketing strategies and campaigns for specific products or product lines to solidify market presence and differentiate them from competitors.
• Formulate business plans and strategically position products in the marketplace.
• Conduct market research, keep track of competitors’ activities, and assess customer needs to inform business decisions.
• Develop pricing frameworks, collaborate with engineering, manufacturing, and sales teams to launch new products or improve existing ones.
• Prepare and negotiate pricing quotes, finalize terms, and ensure documentation is ready for order processing.
• Oversee follow-ups on outstanding accounts receivables.
• Present company product roadmaps and capabilities to customers while conveying customer technology requirements to relevant business units.
• Maintain comprehensive records of all customer engagements and develop tailored action plans with timely execution.
• Build relationships with both potential and current customers to identify and address their service needs.
• Work with business unit representatives to set the annual sales budget.

Requirements:

• Bachelor’s degree in Engineering or a related field.
• Minimum of 2 years of relevant experience within the semiconductor industry.
• Willingness to travel overseas and work extended hours on challenging sales projects.
• Excellent communication and interpersonal skills.
• Detail-oriented, organized, and a proactive team player.
• Self-motivated and capable of working independently with minimal oversight.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QXW39YVY

Our client is specialized in the production and distribution of disposable medical devices.

• Perform technical support for daily manufacturing operation.
• Ensure all equipment are well maintained.
• Assists in machine and equipment improvement and upgrade.

Requirements:

• Nitec in Engineering or equivalent
• At least 3 years of troubleshooting equipment failure and handling technical issues experience in cGMP manufacturing environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Description:

· Planning and release of work orders for all parts (both components and DMM) based on the customer order/ demand forecast and triggers the subsequent needed materials for piece-parts and sub-assemblies.

· Assure each operation meets shipping dates according to sales forecasts or customer orders for both DMM and components.

· Planning and scheduling workflow for each department and operation according to established manufacturing sequences and lead times.

· Update the status of assigned projects, expedites operations that delay schedules and alters schedules to meet unforeseen conditions.

· Prepare production reports.

· Monitors, analyzes and report performance to schedule of production and production support activities, utilizing information derived from material and production control systems.

· Monitor and expedite the components progress of sub-assembly to meet the delivery schedule and initiate the picking/ staging for assembly.

· Expedite all the subsequent process of material once delivered from the sub-tier to meet the delivery schedule.

· Ensure all parties are fully cognizant of production status, & that work planning and execution objectives are integrated and communicated.

· Coordinates and expedites the placement of purchase orders and / or delivery of material if necessary.

· Resolves problems utilizing acquired knowledge and analytical abilities.

Requirements:

· Min 5 years experience in Manufacturing/Automation/Contract Manufacturing

· Proficient in MS Office, SAP or Epicor

· Able to work independently under pressure and meet tight deadlines

· Good interpersonal skills and require good organizational skills such as clear agenda setting, preparation and planning for meetings and tasks, involves input to the planning exercises and reporting against those plans.

· Able to commence work in short notice

· Bilingual in English and Mandarin

• Singapore Based (Jurong Island - Company transport provided near Jurong East MRT)
• Work hours: 8 am to 4.30 pm (Mon-Fri)
• Salary range: $4000 - $5000 + $200 (site allowance)
• Working experience in the chemical industry; Deep knowledge of Safety legislation and regulations in the chemical industry.
• Career Progression Opportunities

Responsibilities:

The Production Engineer (HSE) is responsible for Daily Operations and Projects Safety, the Lead to reviewed, improvement and compliance to all Safety regulations and requirement. Manage the Operations Risk Assessment and ensure occupational Safety

• Lead daily operation as an HSE Production Engineer to ensure Safety in both daily operation and construction projects at site.
• Lead HSE aspect of operation in risk assessment, Hazop study for new modification projects, changes to operating procedures, site construction activities.
• Review and make list of high-risk activities in the process operation based on Hazop study, have regular meeting with production manager and make plan to improve safety level in such areas of operation.
• Coordinate closely with day production & logistics members for HSE aspect of process operation and ensure safe work procedures are followed.
• Study and review all the safety observation feedback and prioritize based on level of risk to follow up through MOC process. Ensure improvement items are followed by keeping records and timeline.
• Work together with project engineers, production members and maintenance coordinator to ensure safety related projects are followed and implemented in a timely manner.
• Review the emergency and disaster prevention procedures to ensure procedures stay relevant to current operation and up to date.
• Lead and enhance any other HSE related improvement projects/activities.
• To perform any other duties or assignments as assigned by superiors.

Requirements:

• Working experience in the chemical industry
• Deep knowledge of Safety legislation and regulations in the chemical industry
• Diploma / Degree in Engineering, health, safety, or environmental field of study

Kylen Seah Reg No: R24124248

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• Design and develop ATE (Automated Test Equipment) programs for new products, covering both production and characterization testing.
• Engage in hands-on testing debugging, conduct RMA analysis, and enhance testing solutions for both hardware and software.
• Develop a test plan for the product, including scheduling, resource needs, and overseeing project tracking and execution.

Requirements:

• Degree in Electrical/Electronics Engineering
• At least 3 years of leadership experience in ATE test program development.
• Proficient in C++/ VB, ATE testers and Chroma.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at

www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Chemist

• Work Location: Jurong Island (Company transport provided near Jurong East MRT)
• Work hours: 8 am to 4.30 pm (Mon-Fri)
• Salary range: $4000 - $5500 + $200 (site allowance)

The Chemist is part of the pioneer team in the startup of EVAL production line, the Chemist is responsible for setup of QC Laboratory at new EVAL site, including management and training of Laboratory analyst, Laboratory system establishment and management to achieve safe and stable commissioning and startup of the new plant.

Responsibilities:

• Interpret laboratory results that are outside of the technical ability of the Lab Analysts.
• Review all process and final product test results to check for validity and possible quality related
• issues.
• Assist quality lab manager in classification for final product and compounding lots.
• Assist quality lab manager to develop and implement QC specifications and standards.
• Assist quality lab manager to establish lab system according to HSEQ requirements.
• Conduct method development and validation, review and upkeep SOP of test procedures,
• calibration procedures and analytical instruments.
• Analyse, review and troubleshoot reliability issues of laboratory equipment and analysis problem
• and develop practical solutions.
• Liaise with vendors to troubleshoot and maintain laboratory equipment.
• Develop, implement, and follow calibration plan for equipment to ensure lab data is always
• accurate, consistent, and repeatable.
• Manage lab external agency audits and management systems certification compliance.
• Support Manufacturing, Quality, Sales, and Product Management functions.
• Assist lab manager, production, or other departments with special projects, as needed.
• Lead Special lab Projects and new grade trials.
• Implement and participate in safety and quality improvement activities.
• Evaluates reported results for consistency with plant process conditions.
• Trains laboratory personnel on new instruments and procedures as needed.• Conduct internal audits on the proper execution of test methods.
• Liaise with Supplier, execute procurement process and receipt.
• Monitor and follow up on daily lab analysis result for accuracy and troubleshooting.
• Task as assigned by QC Manager

Requirements:

• Bachelor's degree in chemistry or related field
• Minimum 5 years’ experience in analytical lab with manufacturing facility
• Experience required in new Laboratory set up, system establishment.
• Experience required with GC, ICP, GC-MS, Antek, KF, IR, UV, Extruder, DSC etc.
• Experience required in statistical process control and statistical quality control.
• Experience preferred in polymer testing and analytical techniques.
• SAP & LIMS experience preferred.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Production Engineer (HSE)

• Work Location: Jurong Island (Company transport provided near Jurong East MRT)
• Work hours: 8 am to 4.30 pm (Mon-Fri)
• Salary range: $4000 - $5000 + $200 (site allowance)

Responsibilities:

The Production Engineer (HSE) is responsible for Daily Operations and Projects Safety, the Lead to reviewed, improvement and compliance to all Safety regulations and requirement. Manage the Operations Risk Assessment and ensure occupational Safety

• Lead daily operation as an HSE Production Engineer to ensure Safety in both daily operation and construction projects at site.
• Lead HSE aspect of operation in risk assessment, Hazop study for new modification projects, changes to operating procedures, site construction activities.
• Review and make list of high-risk activities in the process operation based on Hazop study, have regular meeting with production manager and make plan to improve safety level in such areas of operation.
• Coordinate closely with day production & logistics members for HSE aspect of process operation and ensure safe work procedures are followed.
• Study and review all the safety observation feedback and prioritize based on level of risk to follow up through MOC process. Ensure improvement items are followed by keeping records and timeline.
• Work together with project engineers, production members and maintenance coordinator to ensure safety related projects are followed and implemented in a timely manner.
• Review the emergency and disaster prevention procedures to ensure procedures stay relevant to current operation and up to date.
• Lead and enhance any other HSE related improvement projects/activities.
• To perform any other duties or assignments as assigned by superiors.

Requirements:

• Working experience in the chemical industry
• Deep knowledge of Safety legislation and regulations in the chemical industry
• Diploma / Degree in Engineering, health, safety, or environmental field of study

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

• Configure semiconductor backend equipment.
• Align equipment/modules and perform vision alignment and calibration.
• Conduct machine checkout procedures.
• Provide technical support on-site, both domestically and internationally.

Requirements:

• Nitec in Engineering or equivalent.
• At least 1 year of relevant working experience
• Proficient in machinery automation, including electrical, servo, sensor, and pneumatic systems.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Execute daily production activities on the production line according to work instructions, including tofu making operations.
• Ensure cleanliness and hygiene standards are maintained in the production area.

Requirements:

• PSLE and above
• At least 1 year of relevant working experience.
• Able to work in hot, humid and wet environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Mechanical Engineer

• Working hours: 5-days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong (Company transport provided near Jurong
• East MRT)
• Salary Range: $4500 - $5500

Maintenance Engineer (Mechanical) reports to the Senior Technical
Manager and whose responsibilities include:
1. Oversee, manage, and supervise Company’s in-house and external
Contractors for all mechanical maintenance works related to planning
and execution of:
(a) daily maintenance [preventive, corrective, & breakdown
maintenance],
(b) transition maintenance,
(c) turnaround maintenance and
(d) upgrading and improvement related to maintenance
2. Ensure all mechanical maintenance activities are carried out in
accordance to the Company’s HSEQ Standards & Maintenance
Management System, statutory requirements and best industry practices.
3. Establish, continually improve & execute Company’s maintenance
management system in a safe, efficient, and effective way to achieve
highest equipment reliability & availability objective.
4. Update and maintain accurate maintenance records in order to
provide good maintenance history for data analysis and troubleshooting
purposes.
5. Conduct root cause analysis to eliminate equipment/ system defect
and take appropriate preventive/ corrective measures.
6. Optimize & manage mechanical maintenance inventory level of critical
& non-critical equipment spare parts.

Requirements:

• Degree in Bachelor of Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• Design and develop ATE (Automated Test Equipment) programs for new products, covering both production and characterization testing.
• Engage in hands-on testing debugging, conduct RMA analysis, and enhance testing solutions for both hardware and software.
• Develop a test plan for the product, including scheduling, resource needs, and overseeing project tracking and execution.

Requirements:

• Degree in Electrical/Electronics Engineering
• At least 3 years of leadership experience in ATE test program development.
• Proficient in C++/ VB, ATE testers and Chroma.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at

www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Job Responsibilities:

• To manufacture production units to meet performance objectives with minimum supervision
• To perform simple maintenance and calibration of test means or equipment whenever necessary with the support of Test Engineering dept.
• Manage the WIP level
• Accurate reporting of any anomalies encountered during production process. Detect and alert in case of default or results deviations (even if still within the good range)
• To involve in 5S and Kaizen initiatives
• To support administrative works (Raise PR, Document Archiving Process) and production task as per assigned by team lead/supervisor

Job Requirements:

• NITEC/Diploma in Electronics Engineering
• Ability to understand and follow manufacturing/technical instructions
• Ability to operate complex test tools
• Ability to read or interpret test results

Other Information:

• Working Hours: 5 Days, Shift work may be expected
• Working Location: Changi

• Experience in application support role for min 5 years for support and good knowledge of Java, Unix/Linux, SQL
• Recent experience in working with Java J2EE applications
• Experience in Unix commands , SQL queries
• Experience in programming languages such as JAVA/J2EE.
• Knowledge of web applications, batch jobs, JBOSS, MariaDB, SQL, Shell
• Knowledge of Job scheduling, MQ setup
• Dynamic individual with thirst to learn
• Strong team player with excellent inter-personal skills & ability to meet SLAs

Maintenance Coordinator

• Work Location: Jurong Island (Company transport provided near Jurong East MRT)
• Work hours: 8 am to 4.30 pm (Mon-Fri)
• Salary range: $4000 - $5000 + $200 (site allowance)

To coordinate Maintenance Activities between Production and Technical department. Support GCM/SDM MA & MO activities. Support work permit and authorization activities.

Responsibilities:

• Participate in Daily operation and maintenance meetings to support both operation and maintenance activities by keeping status updated with plan.
• Coordinates all maintenance activities including safe permit issuance, lockout-tagout preparation, GSAP approval, and supporting relevant parties to effectively complete the maintenance works as needed.
• Actively prepare equipment from maintenance phase to commissioning of equipment to ensure the completed jobs function well.
• Supports Capital Project/MOC activities in view of blanking, isolation, LOTO and flushing plans are followed to ensure safe handling
• Work closely with the Maintenance engineers on Transition and Turn Around activities from planning stage to commissioning stage.
• Prepare markup PIDs covering all the GCM activities to be completed during the transition period for safe and timely start-up.
• Coordinate with shift team supervisors to ensure maintenance jobs such as cleaning, washing and technical or in-house contractors follow up jobs are completed before handing over to production.
• Support work permitting and work authorization activities.
• To perform any other duties or assignments as assigned by superiors.

Requirements:

• Related working experience in the chemical industry.
• Diploma/Degree in relevant field.
• Minimum 2-3 years of experience in maintenance planning and coordination.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

about the company

Our client is a leading semiconductor equipment manufacturer with an outstanding international reputation in its field and a great emphasis on training & development. With more than 20 years history, this is a great brand to join at an exicting time in their development.

about the job

• Performs the set-up, calibration, testing and troubleshooting of equipment
• Responsible for Calibration and Repair of electronic boxes
• Setting up of tape & reel cum inspection machines
• Prepare, setup and qualify machines
• Machine assembly
• Setting up of AOI machines
• Machine alignment, teaching and testing

skills & experience required

• Diploma / Higher NITEC in Mechatronics / Electromechanical / Mechanical / Manufacturing / Electrical Engineering
• Clean room environment experience will be a plus
• Assembly & troubleshoot semiconductor equipment
• Training given to candidates with no experience

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job.

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Configure semiconductor devices, troubleshoot issues, and document engineering advancements.
• Create procedures for machinery assembly, assessment, and testing.
• Work with engineering and software teams to enhance system architecture.
• Partner with multidisciplinary engineers to address system challenges.

Requirements

Experience in setting up automated systems.

Proficient in electro mechatronic systems.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

We are hiring a Senior DevOps Software Developer for a project with an International Investment Bank.

The Senior DevOps Developer will take on a hands-on role to:

• Implement all necessary tools to manage the environments, the continuous integration, the continuous delivery, and the processes execution.
• Manage and administrate environments from assembly to production (rules included), infrastructure implementation, and operational usage.
• Execute the maintenance operations, delivery, and environment monitoring.
• Provide L3 support on non-production environments for delivery teams and also on production for support teams.

Job Responsibilities:

• Participate in the automation of the deployment solution
• Participate in environment preparation for testing phases
• Participate in developing tools to simplify day-to-day activities on the program
• Facilitate coordination between program developers and infrastructure engineers
• Ensure continuous improvement and maintenance of the CI-CD pipeline
• Provide investigation help while fostering knowledge and sharing best practices with team members
• Research, design, and develop software
• Analyse user needs and develop software solutions
• Update software, enhance existing software capabilities, and develop and direct software testing and validation procedures
• Work with other engineers to integrate hardware and/or software systems
• Develop specifications and performance requirements

Job Requirements:

• Bachelor Degree in Computer Science, Information Technology, Programming & Systems Analysis, Science (Computer Studies) or related fields
• Minimum 8 years of experience in DevOps Software development
• 5 years of experience in Java/J2EE development
• Working experience with DevOps Methodology; with minimum 5 years of hands-on experience in Jenkins, GIT (GitLab), Ansible, Docker/ Kurbernetes, CICD pipeline, Kibana, Jira
• Good to have grid computing experinece
• Some basic understanding of finance and investment banking, knowledge in Market Risk is an advantage

Keen to explore more? Please reach out to [email protected] with an updated CV for a detailed discussion.

Responsibilities

• Plan material requirements in alignment with the production schedule to ensure optimal inventory levels are maintained.
• Monitor the production schedule closely to meet delivery deadlines and client requirements.
• Collaborate with the Testing team and coordinate with production staff to work according to the established schedule.

Requirements :

• Degree / Diploma in Logistics / Supply Chain / Manufacturing or equivalent certifications
• 2 or more years experience in logistics, material planning, or coordination roles
• ERP competency in materials managements and supply planning
• Effective interpersonal, oral, and written communication skills

Other:

• Monday to Friday

************************************************************

START YOUR REWARDING CAREER WITH US NOW!

************************************************************

Interested Candidates, Please send your Detailed Resume stating Past Employments, Including Reasons of Leaving, Current / Last Drawn and Expected Salary to: [email protected]

WE REGRET TO INFORM THAT ONLY SHORTLISTED CANDIDATES WILL BE NOTIFIED

Manfield Employment Services Pte Ltd (Lic. No: 95C2823)

Posting Personnel: Leroy Lok

EA Personnel Reg No.: R2090115

The Recruiter is responsible for Service Excellence throughout the recruitment cycle. They act as a brand ambassador for the client, focused on delivering exceptional talent while providing proactive and timely communication on the status of the search. They serve as subject matter expert in talent acquisition and provide consultative direction and industry expertise to hiring leader.    

• Work Location: Candidates must be open to work in either of the client sites: RR Solutions Asia Pte. Ltd. 10 Tukang Innovation OR 1 Seletar Aerospace Crescent
• Work Arrangement: Hybrid (3x in the client office per week)
• Work Schedule: Day shift/ APAC shift

Specific Requirements:

• Minimum of 5 years' experience in full-cycle recruiting, preferably within the engineering or advanced manufacturing sectors.
• The ideal candidate should possess strong stakeholder management skills and the ability to independently manage the entire hiring process with minimal supervision.  

Responsibilities:   

Finding Candidates:  

• Lead a detailed job scope meeting with the hiring leader to determine position specifications, providing relevant market data and recommendations on possible approaches to the search or candidate requirements.
• Review of candidates who have applied via the Applicant Tracking System (ATS).
• Evaluate candidate qualifications against position requirements and determine who to move forward in the recruitment process.
• Develop and manage recruitment marketing plans or sourcing plans to determine the most appropriate candidate sources that align to the search requirements.
• Source candidates via resume databases, search engine and networking sites using Boolean search language.
• Solicit and pursue referrals from business networks and/or internal referrals.
• Utilize Cielo’s proprietary software for mobile and email campaigning to talent communities.

Engaging Candidates:

• Use an appropriate mix of media to connect with talent communities (phone, email, social media, etc.).
• Articulate value proposition to candidates who are interested in the job opportunity.
• Prepare candidates for interviews, coaching them on logistical information, interview schedule, appropriate attire and overall expectations.
• Ensure candidates are provided with timely updates concerning the status of their applications and interviews.

Assessing Candidates:

• Draft and utilize phone interview templates appropriate to the job description.
• Use independent judgement to compare candidate phone interview notes and skills assessments with position requirements to determine if the candidate is a match for the role or a potential match for other open positions.
• Issue skills testing as needed and evaluate results (if process dictates).
• Review background and reference information (if process dictates).

Influencing the Hire:

• Keep candidates engaged throughout process, ensuring consistent communication on the status of the search.
• Partner with hiring leader to determine offer details, using market data and compensation guidelines to support recommendations.
• Articulate a job offer to candidate and drive for candidate acceptance, anticipating and negotiating counter-offers as appropriate.

Service Excellence:

• Strict adherence to all regulations (OFCCP and all other compliance standards set forth).
• Work to deliver a strong candidate slate, continuously building talent pipelines to ensure there are multiple qualified candidates in play at all times.
• Provide accurate and regular reporting of recruiting activities to the hiring leader and Cielo leadership to depict both metrics and efforts.
• Identify perceived difficulties with searches and research and recommend solutions to both internal and external stakeholders.
• Proactively and regularly communicate the status of each search to the hiring leader, providing a consultative approach with recommendations on how to move forward. 

Rapsodo Inc. is a sports analytics company that uses computer vision and machine learning to help all athletes maximize their performance. Our proprietary technology applications range from helping PGA Tour golfers optimize their launch conditions to allowing MLB pitchers to increase the efficiency of their breaking balls. Current partners include all 30 MLB teams, MLB, USA Baseball, Golf Digest, PGA of America, and over 1000 NCAA athletic departments. 

New Product Introduction (NPI) is the end-to-end process of bringing a new product to the market from design concept to the end customer. It broadly encompasses the following stages of the engineering team: Lab Prototypes (LP), Production Prototypes (PP) & Production Ramp (PR). 

As an NPI Engineering Intern at Rapsodo, you will be exposed to the different stages of NPI for Rapsodo’s upcoming products to be released. You will also be exposed to the manufacturing environment of how our products are built and supported by our Research & Development (R&D) Team.

Roles & Responsibilities

• Gain invaluable exposure into Singapore’s Technology Sector 

• Be exposed to the different stages of the NPI process for Rapsodo’s upcoming products 

• Assist with building prototypes

• Provide feedback for the prototypes you build 

• Be involved in investigative study with our R&D Team 

• Be exposed to working with our Software Test Team, Purchasing Team as well as Manufacturing Team

• Pursuing Diploma in Electrical, Mechanical Engineering or any related Engineering discipline 

• Responsible, hardworking and a team player • Good attitude to learn and contribute to the team 

• Pro-active, organized & meticulous and able to work independently in a fast-paced environment 

• Have strong analytical, problem solving and inter-personal skills 

• Excellent written and oral communication skills with the ability to present ideas and results to technical and non-technical audiences