Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Job Description

Responsibilities

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components
• Performs electro-mechanical assembly operations, troubleshooting and repair
• Identifies and corrects errors
• Observes all safety standards and maintain a secure, safe, clean and healthy work environment
• Attends required health and safety training and follows safety and security policies, procedures and practices
• Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept
• Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly
• Actively strives to prevent accidents and injuries
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components
• Enters data on computer terminal, such as progress, work expense and labor details
• May perform computer programming, repair or software
• Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects

Requirements

• Able to develop analytical skills and application of scientific methods to perform a variety of activities
• Has good understanding of how the team integrates with others
• Able to recognize and solve typical problems that can occur in own work area without supervisory approval and evaluate and select solutions from established operating procedures and/or scientific methods
• Good communication skills to exchange of information

*Please submit with detailed CV stating current, expected salary, and notice period

*Only shortlisted candidates would be notified

• To lead a group of Production Technicians in the safe and smooth running of the production.
• To assist the Process Engineer to conduct activities and projects to optimize operation during Shift to achieve operational and cost-efficiency.
• To troubleshoot plant/equipment/quality issues and recommend counter-measures.
• To monitor and ensure plant equipment integrity and reliability.
• To assist the Process Engineer to support Shift operation by providing suitable operating conditions for stable plant operation and product quality control.
• To train and develop team members.

• Applicants should possess a Degree in Chemical Engineering or its equivalent
• Applicants should have knowledge of process control and troubleshooting, and hands-on knowledge of plant equipment and instrumentation.
• Essential prerequisites include good analytical and technical report writing skills, ability to be a team player with leadership, initiative, drive & commitment, ability to take the pressure, and able to communicate well with other

Interested candidates can forward their CVs in MS Word format to [email protected]

Reg No. R1875181

Triton AI Pte Ltd

License no. 21C0661

• Permanent position, Salary up to $3,300 with AWS + Bonus
• Chemical Manufacturing Plant, Jurong Island
• Transport Provided at the designated area
• 12 Hours shift role (8am - 8pm/ 8pm - 8am)

Job Description

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Find Your Dream Job With Us

WE ARE HIRING !! Apply now and make a difference.

Job Title: Developer/L3 Support

Role: Production Support Analyst

Job Requisition Number: JR27810

Job Level: 3 - 9 years of relevant experience (L2/L3)

Location: Singapore

Key Skills:

 MS Windows, Unix/ Linux OS, Unix/Linux Scripting, Pentaho, Apache Tomcat, XML, Oracle, Microsoft SQL server,

 SQL scripting, Sybase, Java, Aldon, Bitbucket, Control-M scheduler, SFTP/SSL, Connect Direct, SAP BI platform and tools.

 Strong analytical and good problem-solving skills, good exposure to infra setup is required.

Job Responsibilities

Join and Report to Delivery Lead and be in the Banking clients IT Governance, Risk and Compliance (GRC) Team, part of Group Risk Management.

The role will encompass the responsibility of

1. Being a Technical Analyst and taking up the development of changes to GRC

2. Implementing and supporting vendor systems components and

3. Providing Level 3- Production Support

4. GRC application development, implementation, and support of SIT/UAT testing.

which includes the below:

 Gathering and analyzing requirements and performing very appropriate and accurate impact analysis of the changes requested

 Getting involved in design for both the internal and vendor changes

 Getting involved in development, unit testing as well as system integrated testing for both the internal and vendor changes

 Providing consultation and support in addressing production related issues and tasks and also supporting SIT/UAT activities pertaining to the changes

 Planning, preparing, and executing system rollout and implementations

 Bringing about improvisations and value additions to the system and application components

Key Responsibilities

1. Requirements Management

Engage with System Analyst & SME to collate, understand and finalize functional and technical requirements

2. Design & Development

a) Partner with Architects and Dev. Manager to ensure solution design complies with enterprise design principles, security, and control standards

b) Partner with Development Manager in managing application teams to build the

enhancements

3. Test Management

a) Partner with Test Manager to ensure the completion of SIT, UAT testing, regression/performance/ load testing and application security testing with quality results

4. Implementation Management

a) Prepare technical implementation plan across application teams

b) Coordinate technical implementation activities with release team and across application teams to ensure clean production cutover without issues and adequate post implementation support

Job Requirements

 Min. 6-to-8-year hands on development experience in any operational risk system or any banking application

 Experience and knowledge with Aldon LM(e) product & setup is an added advantage

 Banking domain or financial institution working experience and familiarity with SDLC process and change management tools.

 Must possess customer oriented and Can-Do attitude (should be able to accommodate overtime work when needed)

The candidate should:

 Have good interpersonal and communications skills

 Be a self-starter and be able to work independently

 Be a good team player and be pro-active

 Be able to work in a fast paced and team-oriented environment and be able to manage priorities

 Be able to work under pressure and work closely with stakeholders and other onshore/offshore developers

 Have strong delivery ability and be able to see end-to-end closure of issues to hit delivery, support commitments with focus & discipline

 Be a quick learner - Gain working level knowledge in any new tools and technology as needed.

Please forward your resume in MS word format to [email protected] and

[email protected]

Please refer your friends for any IT openings as we have various positions.

Please do not send PDF Format Resume . Send the following details

1. Notice period

2. Current Salary

3. Expected Salary

4. Visa Status in Singapore

5. Current Location

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Job Description

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Applies basic analytical skills or scientific methods or operational processes to perform straightforward activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Uses standard operating procedures or scientific methods to guide own work and solve standard problems

Impact

• Impacts own work

Interpersonal Skills

• Uses communication skills to exchange information

· Responsible for providing hands-on support in the analysis, design, development, testing and implementation of custom web applications using Microsoft technologies and tools such as Power Platform.

· Assist the management and maintenance of on-premise and cloud-based software systems in the company.

· Providing change management, validations and testing for existing applications and software systems.

· Provide a point of escalation with support for L1 / L2 support, and liaise with external vendors for L3 support for systems.

· Participate in external and internal audit to ensure software and systems used in the company are effective and validated.

· Create and maintain documentations and compliance for data and systems with reference to industry best practices.

· Reviewing software design architecture and updating technical documents.

Perform other tasks as assigned by the supervisor.

Experience:

• 3 or more years with RDBMS and NoSQL databases
• 3 or more years of experience with object-oriented languages (Python, JavaScript, C# .etc)
• Preferred working experience in MedTech / Manufacturing Industry

Skills

• Microsoft Certified Systems Engineer (MCSE)
• Experienced in building and maintaining software systems
• Experienced with Microsoft-based stack (M365, Power Platform, Azure, Dataverse, Microsoft SQL Server, Dynamics 365 Business Central)
• Knowledge of best practices in ICT operations and systems management
• Excellent problem solving and troubleshooting skills
• Process orientated with great documentation practices
• Communication skills, especially for translating technical concepts to non-technical business leaders
• Ability to work on a dynamic, action-focused team that has concurrent projects

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

JOB RESPONSIBILITIES

· Lead new product and manufacturing transfer activities, setup of medical device service & repair facility

· Implement new production / service/ project initiative and manage budget and timeline.

· Liaise with customer on all new product development/ service & repair activities

· Perform intermediary role between Research & Development (R&D) & manufacturing and service & repair.

· Lead and provide direction to Cross Functional Team.

· Champion to lead & develop from First Article / prototypes to customer's approval.

· Work closely with Supplier Chain, Operations & Quality on supplier qualification, Process Failure Mode Effects Analysis (PFMEA), equipment qualification and process validation, establish service & repair processes

· Perform other tasks as assigned by the supervisors.

JOB REQUIREMENTS

· Minimum Degree in Engineering

· Minimum 3 years of relevant working experience

· Experience in NPI & Project Management

· Familiar with the requirement of medical device service & repair center and its operating process

· Project Management skill

· Communication and leadership skills

· Problem Solving and decision-making skills

· MS Project skill

· Process Failure Mode Effects Analysis (PFMEA) and process validation skill

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

JOB RESPONSIBILITIES

· Lead new product and manufacturing transfer activities, setup of medical device service & repair facility

· Implement new production / service/ project initiative and manage budget and timeline.

· Liaise with customer on all new product development/ service & repair activities

· Perform intermediary role between Research & Development (R&D) & manufacturing and service & repair.

· Lead and provide direction to Cross Functional Team.

· Champion to lead & develop from First Article / prototypes to customer's approval.

· Work closely with Supplier Chain, Operations & Quality on supplier qualification, Process Failure Mode Effects Analysis (PFMEA), equipment qualification and process validation, establish service & repair processes

· Perform other tasks as assigned by the supervisors.

JOB REQUIREMENTS

· Minimum Degree in Engineering

· Minimum 3 years of relevant working experience

· Experience in NPI & Project Management

· Familiar with the requirement of medical device service & repair center and its operating process

· Project Management skill

· Communication and leadership skills

· Problem Solving and decision-making skills

· MS Project skill

· Process Failure Mode Effects Analysis (PFMEA) and process validation skill

Job Description

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Job Summary:
The Production Lead Engineer will be responsible for overseeing and managing the production process of chemical products within the organization. This role requires a strong background in chemical engineering, production management, and quality control, as well as the ability to lead and mentor a team. The incumbent will play a key role in ensuring the efficient and safe production of chemical products while adhering to industry standards and regulatory requirements.

Responsibilities:

• Oversee and manage the overall production process, including planning, scheduling, and coordination of resources to ensure timely and efficient production of chemical products.
• Implement and maintain quality control measures to ensure that all produced chemical products meet the required quality standards and specifications.
• Identify opportunities for process optimization and efficiency enhancement and lead the implementation of improvement initiatives to maximize production output and minimize waste.
• Provide leadership and guidance to the production team, including training, mentoring, and performance management, to ensure a skilled and motivated workforce.
• Ensure compliance with safety protocols and regulations to maintain a safe working environment for all production personnel and to prevent accidents or incidents.
• Oversee inventory levels and ensure that raw materials and finished products are efficiently managed to meet production demands and minimize excess inventory.
• Analyse and resolve any production-related issues or challenges, working collaboratively with cross-functional teams to implement effective solutions in a timely manner.
• Maintain accurate documentation of production processes, including standard operating procedures, production reports, and quality control records, to ensure compliance with regulatory standards and facilitate knowledge sharing.
• Monitor production costs and implement strategies to optimize production expenses while maintaining product quality and meeting production targets.
• Stay updated on industry trends, technological advancements, and best practices in production engineering, and integrate relevant knowledge to enhance production processes and overall efficiency.
• Develop detailed project plans for the implementation of cultural change initiatives, ensuring alignment with data-driven insights.
• Foster a culture of continuous improvement by collecting feedback, iterating on strategies, and adapting cultural change initiatives based on ongoing data analysis.

Requirement:

• Bachelor's or Master's Degree in Chemical Engineering or a related field.
• Minimum of 7 years of experience in production management within the chemical industry, with a strong understanding of production processes and quality control systems.
• Proven leadership experience, with excellent interpersonal and communication skills.
• Proficiency in production management software and tools.
• Thorough knowledge of safety and regulatory standards related to chemical production processes.
• Strong analytical and problem-solving skills, with a focus on process optimization and continuous improvement.
• Ability to work effectively in a fast-paced and dynamic production environment

Interested candidates can forward their CVs in MS Word format to [email protected]

Reg No. R1549345

Triton AI Pte Ltd

License no. 21C0661