Key Responsibilities

1. Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
2. Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
3. Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
4. Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software
5. Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Job Description

Responsibilities

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components
• Performs electro-mechanical assembly operations, troubleshooting and repair
• Identifies and corrects errors
• Observes all safety standards and maintain a secure, safe, clean and healthy work environment
• Attends required health and safety training and follows safety and security policies, procedures and practices
• Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept
• Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly
• Actively strives to prevent accidents and injuries
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components
• Enters data on computer terminal, such as progress, work expense and labor details
• May perform computer programming, repair or software
• Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects

Requirements

• Able to develop analytical skills and application of scientific methods to perform a variety of activities
• Has good understanding of how the team integrates with others
• Able to recognize and solve typical problems that can occur in own work area without supervisory approval and evaluate and select solutions from established operating procedures and/or scientific methods
• Good communication skills to exchange of information

*Please submit with detailed CV stating current, expected salary, and notice period

*Only shortlisted candidates would be notified

• To lead a group of Production Technicians in the safe and smooth running of the production.
• To assist the Process Engineer to conduct activities and projects to optimize operation during Shift to achieve operational and cost-efficiency.
• To troubleshoot plant/equipment/quality issues and recommend counter-measures.
• To monitor and ensure plant equipment integrity and reliability.
• To assist the Process Engineer to support Shift operation by providing suitable operating conditions for stable plant operation and product quality control.
• To train and develop team members.

• Applicants should possess a Degree in Chemical Engineering or its equivalent
• Applicants should have knowledge of process control and troubleshooting, and hands-on knowledge of plant equipment and instrumentation.
• Essential prerequisites include good analytical and technical report writing skills, ability to be a team player with leadership, initiative, drive & commitment, ability to take the pressure, and able to communicate well with other

Interested candidates can forward their CVs in MS Word format to [email protected]

Reg No. R1875181

Triton AI Pte Ltd

License no. 21C0661

• Permanent position, Salary up to $3,300 with AWS + Bonus
• Chemical Manufacturing Plant, Jurong Island
• Transport Provided at the designated area
• 12 Hours shift role (8am - 8pm/ 8pm - 8am)

Job Description

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Find Your Dream Job With Us

WE ARE HIRING !! Apply now and make a difference.

Job Title: Developer/L3 Support

Role: Production Support Analyst

Job Requisition Number: JR27810

Job Level: 3 - 9 years of relevant experience (L2/L3)

Location: Singapore

Key Skills:

 MS Windows, Unix/ Linux OS, Unix/Linux Scripting, Pentaho, Apache Tomcat, XML, Oracle, Microsoft SQL server,

 SQL scripting, Sybase, Java, Aldon, Bitbucket, Control-M scheduler, SFTP/SSL, Connect Direct, SAP BI platform and tools.

 Strong analytical and good problem-solving skills, good exposure to infra setup is required.

Job Responsibilities

Join and Report to Delivery Lead and be in the Banking clients IT Governance, Risk and Compliance (GRC) Team, part of Group Risk Management.

The role will encompass the responsibility of

1. Being a Technical Analyst and taking up the development of changes to GRC

2. Implementing and supporting vendor systems components and

3. Providing Level 3- Production Support

4. GRC application development, implementation, and support of SIT/UAT testing.

which includes the below:

 Gathering and analyzing requirements and performing very appropriate and accurate impact analysis of the changes requested

 Getting involved in design for both the internal and vendor changes

 Getting involved in development, unit testing as well as system integrated testing for both the internal and vendor changes

 Providing consultation and support in addressing production related issues and tasks and also supporting SIT/UAT activities pertaining to the changes

 Planning, preparing, and executing system rollout and implementations

 Bringing about improvisations and value additions to the system and application components

Key Responsibilities

1. Requirements Management

Engage with System Analyst & SME to collate, understand and finalize functional and technical requirements

2. Design & Development

a) Partner with Architects and Dev. Manager to ensure solution design complies with enterprise design principles, security, and control standards

b) Partner with Development Manager in managing application teams to build the

enhancements

3. Test Management

a) Partner with Test Manager to ensure the completion of SIT, UAT testing, regression/performance/ load testing and application security testing with quality results

4. Implementation Management

a) Prepare technical implementation plan across application teams

b) Coordinate technical implementation activities with release team and across application teams to ensure clean production cutover without issues and adequate post implementation support

Job Requirements

 Min. 6-to-8-year hands on development experience in any operational risk system or any banking application

 Experience and knowledge with Aldon LM(e) product & setup is an added advantage

 Banking domain or financial institution working experience and familiarity with SDLC process and change management tools.

 Must possess customer oriented and Can-Do attitude (should be able to accommodate overtime work when needed)

The candidate should:

 Have good interpersonal and communications skills

 Be a self-starter and be able to work independently

 Be a good team player and be pro-active

 Be able to work in a fast paced and team-oriented environment and be able to manage priorities

 Be able to work under pressure and work closely with stakeholders and other onshore/offshore developers

 Have strong delivery ability and be able to see end-to-end closure of issues to hit delivery, support commitments with focus & discipline

 Be a quick learner - Gain working level knowledge in any new tools and technology as needed.

Please forward your resume in MS word format to [email protected] and

[email protected]

Please refer your friends for any IT openings as we have various positions.

Please do not send PDF Format Resume . Send the following details

1. Notice period

2. Current Salary

3. Expected Salary

4. Visa Status in Singapore

5. Current Location

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Job Description

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Applies basic analytical skills or scientific methods or operational processes to perform straightforward activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Uses standard operating procedures or scientific methods to guide own work and solve standard problems

Impact

• Impacts own work

Interpersonal Skills

• Uses communication skills to exchange information

· Responsible for providing hands-on support in the analysis, design, development, testing and implementation of custom web applications using Microsoft technologies and tools such as Power Platform.

· Assist the management and maintenance of on-premise and cloud-based software systems in the company.

· Providing change management, validations and testing for existing applications and software systems.

· Provide a point of escalation with support for L1 / L2 support, and liaise with external vendors for L3 support for systems.

· Participate in external and internal audit to ensure software and systems used in the company are effective and validated.

· Create and maintain documentations and compliance for data and systems with reference to industry best practices.

· Reviewing software design architecture and updating technical documents.

Perform other tasks as assigned by the supervisor.

Experience:

• 3 or more years with RDBMS and NoSQL databases
• 3 or more years of experience with object-oriented languages (Python, JavaScript, C# .etc)
• Preferred working experience in MedTech / Manufacturing Industry

Skills

• Microsoft Certified Systems Engineer (MCSE)
• Experienced in building and maintaining software systems
• Experienced with Microsoft-based stack (M365, Power Platform, Azure, Dataverse, Microsoft SQL Server, Dynamics 365 Business Central)
• Knowledge of best practices in ICT operations and systems management
• Excellent problem solving and troubleshooting skills
• Process orientated with great documentation practices
• Communication skills, especially for translating technical concepts to non-technical business leaders
• Ability to work on a dynamic, action-focused team that has concurrent projects

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

JOB RESPONSIBILITIES

· Lead new product and manufacturing transfer activities, setup of medical device service & repair facility

· Implement new production / service/ project initiative and manage budget and timeline.

· Liaise with customer on all new product development/ service & repair activities

· Perform intermediary role between Research & Development (R&D) & manufacturing and service & repair.

· Lead and provide direction to Cross Functional Team.

· Champion to lead & develop from First Article / prototypes to customer's approval.

· Work closely with Supplier Chain, Operations & Quality on supplier qualification, Process Failure Mode Effects Analysis (PFMEA), equipment qualification and process validation, establish service & repair processes

· Perform other tasks as assigned by the supervisors.

JOB REQUIREMENTS

· Minimum Degree in Engineering

· Minimum 3 years of relevant working experience

· Experience in NPI & Project Management

· Familiar with the requirement of medical device service & repair center and its operating process

· Project Management skill

· Communication and leadership skills

· Problem Solving and decision-making skills

· MS Project skill

· Process Failure Mode Effects Analysis (PFMEA) and process validation skill

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

JOB RESPONSIBILITIES

· Lead new product and manufacturing transfer activities, setup of medical device service & repair facility

· Implement new production / service/ project initiative and manage budget and timeline.

· Liaise with customer on all new product development/ service & repair activities

· Perform intermediary role between Research & Development (R&D) & manufacturing and service & repair.

· Lead and provide direction to Cross Functional Team.

· Champion to lead & develop from First Article / prototypes to customer's approval.

· Work closely with Supplier Chain, Operations & Quality on supplier qualification, Process Failure Mode Effects Analysis (PFMEA), equipment qualification and process validation, establish service & repair processes

· Perform other tasks as assigned by the supervisors.

JOB REQUIREMENTS

· Minimum Degree in Engineering

· Minimum 3 years of relevant working experience

· Experience in NPI & Project Management

· Familiar with the requirement of medical device service & repair center and its operating process

· Project Management skill

· Communication and leadership skills

· Problem Solving and decision-making skills

· MS Project skill

· Process Failure Mode Effects Analysis (PFMEA) and process validation skill

Job Description

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Job Summary:
The Production Lead Engineer will be responsible for overseeing and managing the production process of chemical products within the organization. This role requires a strong background in chemical engineering, production management, and quality control, as well as the ability to lead and mentor a team. The incumbent will play a key role in ensuring the efficient and safe production of chemical products while adhering to industry standards and regulatory requirements.

Responsibilities:

• Oversee and manage the overall production process, including planning, scheduling, and coordination of resources to ensure timely and efficient production of chemical products.
• Implement and maintain quality control measures to ensure that all produced chemical products meet the required quality standards and specifications.
• Identify opportunities for process optimization and efficiency enhancement and lead the implementation of improvement initiatives to maximize production output and minimize waste.
• Provide leadership and guidance to the production team, including training, mentoring, and performance management, to ensure a skilled and motivated workforce.
• Ensure compliance with safety protocols and regulations to maintain a safe working environment for all production personnel and to prevent accidents or incidents.
• Oversee inventory levels and ensure that raw materials and finished products are efficiently managed to meet production demands and minimize excess inventory.
• Analyse and resolve any production-related issues or challenges, working collaboratively with cross-functional teams to implement effective solutions in a timely manner.
• Maintain accurate documentation of production processes, including standard operating procedures, production reports, and quality control records, to ensure compliance with regulatory standards and facilitate knowledge sharing.
• Monitor production costs and implement strategies to optimize production expenses while maintaining product quality and meeting production targets.
• Stay updated on industry trends, technological advancements, and best practices in production engineering, and integrate relevant knowledge to enhance production processes and overall efficiency.
• Develop detailed project plans for the implementation of cultural change initiatives, ensuring alignment with data-driven insights.
• Foster a culture of continuous improvement by collecting feedback, iterating on strategies, and adapting cultural change initiatives based on ongoing data analysis.

Requirement:

• Bachelor's or Master's Degree in Chemical Engineering or a related field.
• Minimum of 7 years of experience in production management within the chemical industry, with a strong understanding of production processes and quality control systems.
• Proven leadership experience, with excellent interpersonal and communication skills.
• Proficiency in production management software and tools.
• Thorough knowledge of safety and regulatory standards related to chemical production processes.
• Strong analytical and problem-solving skills, with a focus on process optimization and continuous improvement.
• Ability to work effectively in a fast-paced and dynamic production environment

Interested candidates can forward their CVs in MS Word format to [email protected]

Reg No. R1549345

Triton AI Pte Ltd

License no. 21C0661

You have a good understanding of how marketing work based on your relevant field of study. You can establish and build relationships internally and with working level clients. You’re driven to learn and understand the job function of the client servicing team include performing fairly menial tasks which are part of client servicing scope. You are a believer that data and creativity will drive transformation. Ability to multi-task and follow through on projects with cross-reporting to key stakeholders.

Expectations of an Account Servicing Intern

• Responsible for administrative tasks including but not limiting to billing advices, preparing cost estimates, quotation, writing minutes, deck beautifications etc
• Support supervisor in project management include updating project briefs and timeline
• Coordination work during pre and post shoot

• Support Production system, perform enhancement and develop new changes, etc.
• Good technical Skills with Unix scripting, Sql, oracle and production support.
• Knowledge in Java or web technologies, will be preferred.
• Experience in ITIL processes.
• Able to interact and coordinate efficiently with other IT Sections and within Core Application Team itself.
• Prepare/update Technical Specifications and end user system job instructions documents.
• Liaise with external parties pertaining to system collaboration and system testing.
• Observe, maintain and comply with the KPIs, work instructions, guidelines, security controls, audit controls and governance set.
• Ensure quality deliverables, documentation, reporting for work assigned and performed.
• Willingness to work on call support on weekends / public holidays.

Responsibilities:

• Lead a group of Production Technicians in the safe and smooth running of the production.
• Assist the Process Engineer to conduct activities and projects to optimize operation during Shift to achieve operational and cost efficiency.
• Troubleshoot plant/equipment/quality issues and recommend countermeasures.
• Monitor and ensure plant equipment integrity and reliability.
• Assist the Process Engineer to support Shift operation by providing suitable operating conditions for stable plant operation and product quality control.
• Train and develop team members

Requirements:

• Degree in Chemical Engineering or its equivalent, preferably with 1 to 2 years of experience in petroleum, chemical or polymer industries.
• Have knowledge of process control and troubleshooting, hands on knowledge of plant equipment and instrumentation.
• Essential prerequisites include good analytical and technical report writing skills, ability to be a team player with leadership, initiative, drive & commitment, able to take pressure and able to communicate well with others.
• This is a shift work position (i.e. Rotating AM and PM shifts, including weekends and Public Holiday) and there will be scheduled off days

Interested candidates can forward their CVs in MS Word format to alex#triton-ai.com

Reg No. R1549345

Triton AI Pte Ltd

License no. 21C0661

Key Responsibilities

Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies.

Interfaces with other engineering functions to coordinate the release of product improvements and/or new products. Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products.

Estimates manufacturing costs, determines time standards and makes recommendations for tooling and process requirements. Uses DFx principles to reduce manufacturing and/or product costs, and improve delivered product quality.

Develops and uses test procedures, including assisting with the definition of test specifications with design / software engineering. May work with test engineering on the design and development of text fixtures. May assist in the coordination of test fixture sourcing activities.

Gathers operational and test data and evaluates results; may takes corrective/continuous improvement actions.

Evaluates work methods, procedures and policies. Participates in the development and maintenance of new and existing business processes; updates as necessary to ensure current practices are documented.

Determines root cause and corrective action analysis for issues that arise during assembly and/or test of systems; provides failure analysis report as required.

Performs Process Failure Mode, Effects and Criticality Analysis when working with New Product Development.

Other Requirements: This position may require standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools.

Additionally, because this position also may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities

Business Expertise

• Understands key business drivers; uses this understanding to accomplish own work

Leadership

• No supervisory responsibilities but provides informal guidance to new team members

Problem Solving

• Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents

Impact

• Impacts quality of own work and the work of others on the team; works within guidelines and policies

Interpersonal Skills

• Explains complex information to others in straightforward situations

Job Description

Key Responsibilities

1. Provides executive leadership to a major manufacturing / supply chain function supporting a large and complex business unit. May lead functional operations at multiple manufacturing sites. Establishes and monitors production using metrics/budgets through systems, and initiates appropriate corrective action as needed and based on results. Establishes and controls project schedules, timelines.
2. Plans and evaluates optimal resource utilization and efficiency of operation to minimize costs and allow for on-time delivery of product to customers. Accurately establishes plant capacity.
3. Directs, guides, monitors, and evaluates Operations Team personnel to accomplish specific production and supply chain goals consistent with established operational, housekeeping (5S), and safety procedures and processes. Engage in problem solving in complex situations and process improvements in streamlining work processes.
4. Leads continuous improvement efforts and projects to refine production methods and processes to produce quality products that meet customer requirements in the most cost-effective manner.
5. Identifies and pursues new technologies to improve production, increase efficiency and resource utilization and maximize profitability.
6. Works closely with members of Senior and Executive Management to align overall operations development with business needs/opportunities. Promotes an environment of cooperation and trust.
7. May provide ownership / leadership for a major divisional function, project, or program (i.e., Inventory Management, AMPS/Lean, Responsiveness / Agility). Provides leadership, guidance, mentorship, and personal development of his/her direct reports in the areas of daily operational management, systems development, and optimization.
8. Identifies process and quality changes designed to improve manufacturing or department capabilities. Drives Lean, Safety and Quality. Takes corrective action.

Functional Knowledge

• Demonstrates broad and comprehensive understanding of different systems, theories and practices

Business Expertise

• Applies broad industry and commercial awareness to drive financial and operational performance across business unit, department or sub-functions

Leadership

• Leads through subordinate managers of managers; executes segment/functional business plans and contributes to the development of segment/functional strategy

Problem Solving

• Directs the resolution of highly complex or unusual business problems applying advanced analytical thought and judgment

Impact

• Guided by segment/functional strategy, impacts results of a department, business unit or sub-function or facilitates the work done by other segments/functions by providing support to impact the business

Interpersonal Skills

• Negotiates and influences the opinions of others at the senior executive level and in external organizations; exercises sensitivity to the audience

Position requires understanding of Applied Materials global Standards of Business Conduct and compliance with these standards at all times. This includes demonstrating the highest level of ethical conduct reflecting Applied Materials' core values.

• To lead a group of Production Technicians in the safe and smooth running of the production.
• To assist the Process Engineer to conduct activities and projects to optimize operation during Shift to achieve operational and cost-efficiency.
• To troubleshoot plant/equipment/quality issues and recommend counter-measures.
• To monitor and ensure plant equipment integrity and reliability.
• To assist the Process Engineer to support Shift operation by providing suitable operating conditions for stable plant operation and product quality control.
• To train and develop team members.

• Applicants should possess a Degree in Chemical Engineering or its equivalent
• Applicants should have knowledge of process control and troubleshooting, and hands-on knowledge of plant equipment and instrumentation.
• Essential prerequisites include good analytical and technical report writing skills, ability to be a team player with leadership, initiative, drive & commitment, ability to take the pressure, and able to communicate well with other

Interested candidates can forward their CVs in MS Word format to [email protected]

Reg No. R1875181

Triton AI Pte Ltd

License no. 21C0661

• Permanent position, Salary up to $3,300 with AWS + Bonus
• Chemical Manufacturing Plant, Jurong Island
• Transport Provided at the designated area
• 12 Hours shift role (8am - 8pm/ 8pm - 8am)

Job Description & Requirements:

• Ensure that all products are manufactured with utmost efficiency and quality, according to planned protocols using the appropriate technology. Evaluates, products, components and applications by designing and conducting researching programs, applying knowledge of project and materials
• Develops products by studying customers' requirements, researching and testing manufacturing and assembly methods and materials
• Assures products' quality by designing finished products
• Prepare report by collecting, analyzing and summarizing information trend
• Guide assembly of automation module / machine according to mechanical assembly drawing, and electrical schematic diagram
• Able to interpret well on mechanical drawings, assembly drawings and electrical schematic diagrams
• Guide and improve the production performance of the department together with Manufacturing Manager (quality, lead-time, delivery performance, costs)
• Work closely with the Quality department to assure conformity of product to customer requirement
• Monitor and adjust production processes or equipment for quality and productivity
• Other responsibilities that may be assigned from time to time
• Perform ad-hoc tasks when requested

Requirements:

• Degree / Diploma in Mechanical/Electrical/Mechatronics
• 1-4 years of relevant experience preferably in Assembly of Equipment or Test area preferably in Semiconductor Industry
• Experience in maintaining the Quality of Work
• Knowledge of Material BOM’s
• Capable of understanding Engineering drawings for Mechatronics-assembly
• Experienced in Manufacturing Engineering Tools (5S, Process Flow, FMEA, System Risk Analysis, DMAIC, 8D, Control Plan, SOP, SOO, Work Instructions, Root Cause Analysis, Capacity versus Demand)
• Experience in Mechanical Fitting, Cable Routing and Installation of Equipment. Preferably in a Semiconductor Equipment Industry.
• Able to use Solid works to design simple fixtures / jigs
• Technical skills must include basic knowledge of mechanical/Electrical/Mechatronics
• Ability to work independently with minimal supervision

• Perm with VB
• With minimum 3 years of marketing experience in developing marketing plans for events such as trade shows, conferences, etc.
• Proficient in graphic design software skills will be an added advantage
• Strong presentation skills

Job Responsibilities

• Develop and execute B2B marketing plans that may include participation in industry conferences and events, trade shows and webinars
• Work with cross-functional team on preparation of effective marketing collaterals for online, offline and trade events
• Create compelling sales promotion material and content, including but not limited to, outdoor and indoor advertising, video, catalogue, etc.
• Work collaboratively with external design agencies to execute designs and creative contents
• Provide support and work closely with the sales teams to set the marketing strategy including branding, lead generation and competitor analysis
• Perform ongoing tracking and reporting on B2B marketing initiatives
• Organize networking events to maintain B2B partners relationship
• Assist in any other activities when required
• Perform any duties as assigned by supervisor

• Degree in Business, majoring in Marketing
• Minimum 3 years’ experience in Marketing or similar role will be considered favorably
• Self-starter mentality with the ability to manage multiple projects in a fast-paced working environment
• High level of attention to detail including proven ability to manage multiple, competing priorities simultaneously
• Excellent interpersonal and communication skills, adept at building relationships with different stakeholders
• Observant and analytical with experience in analyzing and interpreting data
• Graphic design software skills or equivalent will be considered favorably

Kindly note that only shortlisted candidates will be notified.

Triton AI Pte Ltd

Registration Number: R23118389

EA: 21C0661

• Permanent position
• Variable bonus

Authorities and Responsibilities

1. To organize, co-ordinate, check and ensure all production activities follow as plan.
2. Calculate machine cycle time and organize production schedule base on machine capacity and capabilities
3. Plan manpower resources and delegate machining job to machinist
4. Verify program issue to workshop
5. Analyze and provide solution to solve problems between programmer and production dept.
6. Analyze monthly machining and scrap report
7. Good supervisory skill, people skill and 5 ‘S’ housekeeping
8. Good writing and communicating skill
9. Good in mechanical process, such as machining process, H/T, jig and fixture etc.

Competence Requirements

• Preferred NTC 2 / Diploma in Engineering discipline or equivalent.
• Minimum 3 years of working in related industry, and having 2 – 3 years of supervisory experience and preferably with working knowledge in machining processes.
• PC literate
• Possess excellent interpersonal communication skills and is an effective team player who is also self driven with a strong achievement orientation.

Primary

1. To Provide primarily support at production department.
2. Assist superiors in prepare and compile reports.
3. Prepare, generate and release job order / purchase requisition to various departments of the confirmed job orders.
4. Responsible for planning of production output, monitor machine capacity, OEE etc.
5. Work closely among inter-departments to ensure committed schedules are met.
6. Provide regular update to the sales/Projects team on project development in a timely manner.
7. Maintenance and upkeep records of Production/Engineering/Technical documents.
8. Arrange production run according to Supervisor/HOD instruction.
9. Receiving/distribution of raw material for production usage.
10. Parts distribution to other departments for next process.
11. Able to systemize and improve on workflow.
12. Good application and know-know on the ERP / reporting tools.
13. Ability to understand or interpret all technical drawing and part specification.

Education level:

1. Min. NTC/Nitec level ME/Mechatronic or its relevant.

Experience level:

1. Two (2) years in relevant experience in clerical environment or manufacturing or its relevant

2. Perform competent in clerical duties, computer literacy.

3. Result oriented, resourceful and independent.

4. Ability to read, understand mechanical drawing and Geometric Dimensioning and Tolerance.