Responsibilities

• Responsible for improving manufacturing process and equipment capability to achieve higher production yield and quality
• Responsible in driving cost reduction programs through continual improvement activities
• Responsible for supervising plating technicians and operators in meeting manufacturing requirement

Requirements

• Min Degree in Chemical Engineering/ Mechanical Engineering or relevant
• Min 2 years of working experience in plating industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for coordinating and following up on IT projects implementation
• Responsible for coordinating IT related projects on technological analysis, solutions implementation, administration, and maintenance.
• Responsible for supporting ERP issues

Requirements

• Min Diploma in Computer Science / Information Technology or equivalent
• Min 1 year of working experience in D365/AX/NAV support
• Regional travel as and when required

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing customer support for Equipment Products with regard to Installation, Training and Field Service via on-site visits, Phone, Internet Media and email

Requirements

• Min Diploma in Engineering
• Min 3 years of working experience in machine service experience
• Overseas Travelling is required

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible managing waste water plant & DI water plant with existing chemistries, instrumentation.
• Responsible for providing technical support to the plating department water treatment, laboratory and engineering and
• manufacturing activities
• Responsible for leading the water treatment section to resolve all issues related water.

Requirements

• Min Degree in Engineering or relevant
• Min 3 years of working experience in manage water treatment system

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for analysing, troubleshooting and resolving stamping issues to achieve productivity, quality and cost targets.
• Responsible in assisting in stamping tool design reviews for new product development
• Responsible for establishing process capability, optimum parameter setting, mill cost, Bill of Material (BOM) and work instruction for dies and processes.
• Responsibel in identifying and proposing cost reduction program and upgrading to achieve quality and competitive cost to meet present and future stamping requiremen
• Responsible for providing technical guidance and training to juniors technicians and toolmakers

Requirements

• Min Nitec in Production/ Manufacturing/ Mechanical Engineering/ Tool and Die Making
• Min 5 years of working experience in Stamping Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for conceptualize the assembly process either in semi-auto, fully automatic machines or multi-purpose fixtures for new products with both quality and cost considerations
• Responsible in planning, excuting and completing assembly process per the established timing and quality requirements.
• Responsible for design, coordinate fabrication, assembly, debug and test run the equipment.
• Responsible for establishing process parameters for all new assembly operations/machines and update all process specifications or issues before release to manufacturing.
• Responsible for production output, quality & yield during the transfer phase to production.

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in process development
• Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for leading in continuous development and improvement of the company and assist in the development and formulation of long and short-range planning, policies, programs and objectives.
• Responsible for developing the operational plan and establish procedures for maintaining high standards of manufacturing operations to ensure that products conform to established customer, licensor and company quality standards.
• Responsible for achieving ptimum employee levels with least amount of overhead and raw material costs to meet annual budgetary plan.
• Responsible for developing and improving team through replacement, planning and activities
• Responsible for all the written performance reviews of all management and supervision within your area of responsibility

Requirements

• Min Diploma in Engineering
• Min 5 years of working experience in managerial role in Manufacturing / Oil&Gas/ Precision Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for inventory management ensuring the inventory is in healthy & good condition.
• Responsible for coordinating with manufacturing Plants and respective Supply Chain Management team to ensure materials and services are being delivered to the respective designation on time and in full (OTIF).
• Responsible for raising material/purchase requisition promptly and monitor the delivery status to ensure delivery is on-time and stock-out
• Responsible for Production Planning and Scheduling process and administrative handling.
• Responsible for performing material planning (MRP/JIT), sub-contracting and execution of raw material resources for Sales Order to meet on time and in full delivery (OTIF).

Requirements

• Min Diploma in Engineering, Supply Chain or Business
• Min 3 years of working experience in Production/ Material Planning in Manufacturing/ Oil&Gas/ Precision industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing customer support for Equipment Products with regard to Installation, Training and Field Service via on-site visits, Phone, Internet Media and email

Requirements

• Min Diploma in Engineering
• Min 3 years of working experience in machine service experience
• Overseas Travelling is required

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for ensuring at all confidential secretarial and administrative duties are completed timely and within established company guidelines
• Responsible for managing the appointments and meeting schedules of the VP
• Responsible in assisting in preparation of presentation materials and meeting minutes
• Responsible for making travel arrangements and hotel bookings for visitors from overseas and local employees travelling overseas, including VISA related issues.
• Responsible for preparation and liaison for air shipment and courier activities

Requirements

• Min Diploma in any field
• Min 3 years of working experience in secretary

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for ensuring that corrective actions are in place and implemented for all non-conformances detected during audits
• Responsible for liaising with production side on the investigation of root cause of non-conformance and procedural failures
• Responsible for reviewing and approving required specifications and revisions in documentation prior releasing for production or customer
• Responsible for conducting process audit and internal quality scheduled/unscheduled audit
• Responsible for ensuring work is carried out in accordance with documented procedures

Requirements

• Min Diploma in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in CNC/ Precision/ Machining Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Role: Cell Manufacturing Lead

Reporting to: VP(CMC) & Chief Scientific Officer

Job scope:

1. Providing technical and strategic leadership for the Chemistry, Manufacturing, and Controls (CMC) of company’s clinical assets.
2. Execute CMC strategy and submission plans to support regulatory filings for clinical trial applications in Singapore and US.
3. Build and manage the cell manufacturing and quality control team in Singapore.
4. In charge of the GMP cell manufacturing and process development in Singapore.
5. Act as the Manufacturing Sciences and CMC expert during audits and interactions with regulatory agencies.
6. Drive rigorous assessment of CMC issues, decisions to ensure the compliance with regulatory bodies’ requirement.

Requirement:

1. Advanced degree in life sciences/pharmaceutical sciences/biomedical research; minimum MS, preferred PhD.
2. Experience in CAR-T, TCR-T or other cell therapies.
3. Familiar with immune cell manufacturing, flow cytometry analysis; Cytokine measurement assays; qPCR assays; etc.
4. Self-motivated, good interpersonal skills.
5. Project management experience. • Able to write/read Chinese will have an advantage.

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Responsible for managing and planning manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• Responsible for developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for leading and supporting continuous improvement projects
• Responsible for providing technical support to Production to achieve technical and quality requirements.
• Responsible for supporting Request for Quote (RFQ) proposal development and process

Requirement

• Min Diploma or Degree in Mechanical/Manufacturing/Aeronautical Engineering
• Min 3 years’ experience in Precision Engineering/ Aerospace/ Oil &Gas Manufacturing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for developing of test scripts, issues tracking and test management
• Responsible for conducting qualification test of new product or revised component with issuing of test report and recommendations to the test findings
• Responsible for testing accordance to applicable product standards, guidelines, regulations and dormakaba Corporate Standard (DCS)
• Responsible for preparation of samples and coordinate with PQS EN or certification bodies for product certification
• Responsible for evaluating and analysis of competitors’ products – teardown analysis, VA/VE

Requirements

• Min Diploma in Engineering or relevant
• Min 2 years of working experience in production quality or test lab.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Responsible for managing and planning manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• Responsible for developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for leading and supporting continuous improvement projects
• Responsible for providing technical support to Production to achieve technical and quality requirements.
• Responsible for supporting Request for Quote (RFQ) proposal development and process

Requirement

• Min Diploma or Degree in Mechanical/Manufacturing/Aeronautical Engineering
• Min 3 years’ experience in Precision Engineering/ Aerospace/ Oil &Gas Manufacturing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for managing and leading Engineering Team
• Responsible for leading the team to identify and reduce waste, improve process time utilization and cost reduction initiatives to increase manufacturing productivity
• Responsible for timely and accurate completion of manufacturing routing for turn- key production work order

Requirements

• Min Diploma in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in Precision/ Machining/ CNC Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Lead a team of line leaders and operators to meet daily production output, quality, productivity and yield.

• Conduct daily pass-down meetings and escalate line issues if any

• Oversee manpower/overtime and consumables planning

• Ensure manufacturing and safety procedures are being followed

• Conduct training/coaching to leaders & operators to improve performance

• Implement ideas and improvement activities to prevent human errors

• Ensure good discipline and housekeeping in the line

• Coordinate with other departments to support projects, evaluations and preventive maintenance activities in the fab

Requirements

• Diploma/Degree in Engineering/Science/Production/IT

• Preferably experienced in high-tech, high-vol manufacturing environment

• Good leadership and communication skills

• Willing to work 12-hour shifts (day or night)

Responsibilities

• Responsible for analysing, troubleshooting and resolving stamping issues to achieve productivity, quality and cost targets.
• Responsible in assisting in stamping tool design reviews for new product development
• Responsible for establishing process capability, optimum parameter setting, mill cost, Bill of Material (BOM) and work instruction for dies and processes.
• Responsibel in identifying and proposing cost reduction program and upgrading to achieve quality and competitive cost to meet present and future stamping requiremen
• Responsible for providing technical guidance and training to juniors technicians and toolmakers

Requirements

• Min Nitec in Production/ Manufacturing/ Mechanical Engineering/ Tool and Die Making
• Min 5 years of working experience in Stamping Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and developing software for automated semi-conductor process equipment.
• Responsible for improving equipment performance through CIPs and other development initiatives
• Responsible for supporting field work to upgrade and resolve customer issues.

Requirements

• Min Diploma in Electrical & Electronics Engineering/Computer Studies or equivalent.
• Min 5 years of working experience in programming on Windows (XP and above) environment.
• Experience in C++, VC++, MFC, SQL, OOP, using Servo, Stepper Motion Controller, Analog Device and High Speed I/O
• Knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

JOB SUMMARY

Manufacturing Engineer will be responsible for planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site. The Manufacturing Engineer will adopt as its goals profitability, effectiveness, adaptability, responsiveness, quality, and the continuous improvement of products and services throughout their life cycles.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Able to perform Assembly process for High Level Assembly (HLA). Create procedures for processes and train staffs accordingly.

· Knowledge on assembly drawing, interpretation part drawing and specification is a must. Candidate with Medical product understanding will be added advantage,

· Report writing, perform DFM and able to communicate within internal and external stakeholders.

· Strong understanding on PFMEA, Process Flow, Control Plan and Process risk Assessments.

· Communicate frequently with operations, technical, and quality representatives within area of support through the tier process.

· Provide leadership and commitment in supporting continuous improvements in quality, productivity, and delivery performance through the deployment of continuous improvement framework.

· Reviews all input from Engineering Department, ECO’s, new product releases, configuration control policies, marking requirements, and participates in the DFM process.

· Solid understanding on BOM, ECN process, PCN and shop floor management will good plus.

· Monitor and continuously improve daily quality/efficiency performance for assigned areas. Exposure on Lean Tools example Cycle Time, TAKT Time, LBR is key, waste reduction etc would point to gauge.

· Involve on new product development by working with R&D, New Product Development and Quality to provide Design for Manufacturability guidance on hardware.

· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor. Comply with all procedures within the company security policy.

REQUIREMENTS:

Candidate must possess at least a Diploma, Degree, Engineering (Mechatronic/Mechanical) or equivalent. At least 5 year(s) of working experience in the related field is required for this position.

Job Description

• Ensure the camera system is set up according to the production plan which include the optical, electronic special effects and autocue system.
• Perform creative camera work and able to offer alternative angles for production needs whenever required on various operational modes (i.e Tracks, Tripods, or Handheld). Knowledge in Jibs, Underwater and Steady Camera.
• Work with stakeholders during production to ensure best visuals are captured i.e. camera position, techniques and angles of shots, and ability to problem solve on the spots to ensure output quality not compromised.
• Keep up to date with industry filming methods and equipment, receptive of innovating ways of filming.

Job Requirements

• Nitec in Electronic / Electrical Engineering or Diploma in Film Production.
• Good working knowledge of camera systems, lenses and camera support equipment.
• Preferably 3 years of related working experience.

The Regional Business Field Manager is responsible for

• Develop and implement a G2M-Strategy for the Business Field Manufacturing Industries on the sub-region or country level together with the sub-regions or countries following the global business field strategy.
• Drive business and competitive intelligence for the region within the global guidelines and process for business and competitive intelligence and derive competitive strategies on sub-region or country level for the assigned business field
• Ensure aligned and consolidated input for the global business field strategy and the deployment on a regional level.
• Actively support Sales & Marketing organizations within the region to drive regional Net Sales and Global Gross Profit (GGP) of the assigned business field.
• Regional marketing for the assigned business field and operational support of sales & marketing organizations on the sub-region or country level for all topics related to the assigned business field.
• Actively guide, coach, and mentor the sub-region or country sales & marketing organizations for the assigned business field.
• Actively participate in the development of sub-regional and country marketing plans and drive content development for the assigned business field and ensure its execution