About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You are responsible for identifying, assessing and advising on risks arising from the workplace health, environmental and/or work processes, recommending measures to eliminate or minimize and control the risks and implementing the measures.

Key Responsibilities

• Conduct job and environment hazard and risk assessments, perform workplace evaluations, and implement corrective and preventive actions
• Apply relevant licenses, conduct tests and provide necessary inspection reports on environment and safety to drive improvement
• Lead and continually review existing and new Fab processes and equipment for EHS compliance, including managing waste, air, water, chemicals, gas and others
• Manage semiconductor process safety, establish Environment, Health and Safety (EHS) culture, implement and enhance the EHS program for employees and contractors
• Perform regular and ad-hoc inspections. audits and supervise hazardous operations safely
• Lead and facilitate ERC (Emergency Response Committee) related activities such as factory emergency response, fire, gas leak and others
• Collaborate with relevant departments for ISO14001, ISO45001, ISO14064, and ISO50001 management systems certification and compliance
• Provide technical, regulatory and process guidance to address emerging EHS issues

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Engineering or Science background including Occupational Safety, Chemical Engineering or Chemistry, environmental science and emergency response or management
• Minimum of 3 years of experience in semiconductor, electronics manufacturing, or other chemically intensive manufacturing industries and regulatory compliance preferred.
• Possess industrial safety, environmental protection, and fire protection related certificates
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months

Key Skills and Attributes

• Strong analytical skills and able to work under pressure in a fast-paced environment
• Good interpersonal, leadership and communication skills to work effectively across functions and geographical teams with diverse background
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Senior / Associate Engineer to be part of our Thin Film diverse team of talent. You will support the running of Production and ensure equipment readiness and worthiness for production.

What you will be working on:

• To assist Thin Film equipment engineers to sustain equipment performance and perform schedule & adhoc preventive maintenance related activities to achieve operation goals
• Perform 12-hour shift duties to support the running of Production and ensure equipment readiness and worthiness for production
• Ensure good PM quality and PM success rate for good Uptime
• Planning of Daily PM schedule for negotiations with Manufacturing
• Maintain good 6s in work environment before and after PM
• Parts ownership to ensure sufficient parts for basic Preventive Maintenance Activities
• Troubleshoot and resolve Issues encountered during PM
• Assist Duty Engineers in Sustaining the line and recovery of Tool Alarms and parts change
• Assist new crews on their On-The-Job-Training (OJT) by acting as their buddy
• Provide Hands on Training for New PM Crew
• Lead/Participate in Continuous Improvement projects to meet Company Objectives

More about you:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics
• 1-2 years’ experience in frontend semiconductor manufacturing environment.
• Some knowledge in Microsoft Office applications
• Able to perform 12-hour rotating shift
• Good ability and experience working in a multi-cultural environment
• Clear and concise presentation skills
• Team Player
• Strong sense of responsibility and Positive learning attitude

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You will be responsible to oversee the development, operation and management of the chemical analysis lab, ensuring precision and compliance with industry standards while optimizing analytical methodologies and supervising staff.

Key Responsibilities:

• Create and manage the operation system for the chemical laboratory to ensure compliance with industry

standards and quality requirements.

• Develop and implement advanced analytical methods to meet the fab’s monitoring and analysis needs.

• Optimize processes to enhance the precision and efficiency of chemical analyses.

• Ensure the calibration, validation, and maintenance of laboratory equipment to uphold accuracy and reliability in results.

• Conduct micro-contamination monitoring activities to detect and mitigate issues effectively.

• Provide guidance and supervision to laboratory staff, establishing and achieving annual performance goals.

Education Qualification & Essential Experiences:

• Bachelor’s degree or higher in Electronics, Electrical Engineering, Physics, or a related technical field.
• Minimum of 3 years of relevant experience in semiconductor Chemical Analyst engineering.
• Strong problem-solving skills and a detail-oriented approach with the ability to analyse complex data and derive insights.

Personal Attributes:

• Excellent coordination and communication skills, with the ability to work independently and manage multiple tasks effectively in a fast-paced environment.
• Able to be reliable and accountable in all tasks and responsibilities.
• Have the drive to achieve goals and complete tasks independently.
• Proficient in effectively conveying information through both written and verbal communication.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.es.

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You will be responsible for managing the logistics of import and export shipments, working efficiently in a fast-paced environment and handling logistics documentation and related tasks.

Key Responsibilities:

• applying for all relevant import/export licenses and ensuring compliance with local and international regulations, including customs and trade compliance standards, is also a crucial part of the role, particularly regarding import and export activities.
• preparing and managing all shipping-related documentation, including invoices, bills of lading, and other essential paperwork to ensure that all shipping documents are complete, accurate, and in compliance with industry regulations and company standards.
• overseeing payment and billing processes, ensuring the accuracy of invoicing and all financial transactions related to shipping and logistics operations.
• organizing and maintaining a well-structured document control system, ensuring all shipping related documents are easily accessible, updated, and compliant with relevant standards and company policies,
• coordinating shipping schedules and transportation arrangements with suppliers, customers, and service providers to ensure timely deliveries.
• monitoring shipments to track their progress, ensuring that they arrive on time, and will proactively resolve any issues such as delays or discrepancies by communicating with relevant parties.

Education Qualification & Essential Experiences:

• Bachelor’s degree in supply chain management or STEM related fields.
• Minimum 2 years & above of working experience in handling import & export shipping documents / procurement process.
• Experience in procurement process within the semiconductor industry is a plus.
• Proficient in Microsoft Office (Excel, Word, Outlook & Power Point)

Key Competencies:

• Proficient in analytical thinking and problem-solving
• Strong negotiation and relationship-building skills
• Performs well under pressure.
• Result-driven and adaptable to fast-paced environments.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You will be responsible in leading a reliability engineering team to execute transfer technology qualification, reliability monitor, process change evaluation, and manage customer-focused reliability requirements.

Key Responsibilities:

• Establish reliability test laboratory and manage the daily operation.
• Implement and optimize reliability test methodologies, ensuring alignment with industry standards and client expectations.
• Conduct qualification specifications for transfer technologies, guiding teams in the development and execution of testing methodologies.
• Manage the execution of reliability qualification processes, ensuring continuous monitoring and timely interventions for corrective actions.
• Apply advanced statistical tools and quality assurance methods to proactively detect and address potential reliability issues.
• Assess reliability risks for customer products, providing strategic guidance to mitigate potential issues.
• Manage worldwide customer reliability specifications and requirements.

Education Qualification & Essential Experiences:

• Bachelor's degree or higher in EE/Physics/Material Science or other related engineering discipline.
• At least 15 years of experience in Integrated Circuit process and Reliability Assurance management.
• Strong knowledge of semiconductor device physics, wafer-level reliability, and statistical quality control methods.
• Experience in risk assessment and developing corrective action plans.

Personal Attributes:

• Strong leadership skills
• Excellent interpersonal, written, and verbal communication abilities.
• Ability to multitask effectively and solve problems efficiently.
• Enthusiastic and able to motivate a team to achieve exceptional results.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.es.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible and focus on improving tool performance and availability, in charge of maintenance, diagnosing failures and implementing effective solutions to meet uptime and cycle time requirements in the Wet Etch module.

Key Responsibilities

• Maintain equipment performance in cleanroom environment for quality production.
• Handle on-duty tasks and conduct fundamental alarm troubleshooting; identify root cause and problem-solve critical equipment issues with urgency
• Install and qualify new tool sets on schedule to increase capacity promptly
• Continually improve tool uptime availability, drive defect reduction and enhance hardware capability
• Develop defense and monitoring system to prevent equipment failure or performance lost.
• Analyze complex data sets and derive actionable insights to optimize equipment parameters and controls
• Actively collaborate with equipment suppliers and partners to identify tool deficiencies; develop, evaluate, and validate corrective and preventive solutions

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Minimum of 2 years of experience as a Wet Etch equipment engineer, possessing in-depth knowledge. Experience working in a 12” fab would be advantageous
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a MECHANICAL ENGINEER/ SENIOR ENGINEER to be part of our FACILITIES DEPARTMENT diverse team of talent. You will be responsible for HVAC systems, Clean Room, Building services and maintenance.

What you will be working on:

• To provide facilities support pertaining to Clean Room, Chillers and HVAC systems, Environmental Protection Systems, Process Utilities Supply Systems, Building Services and Maintenance, and other miscellaneous mechanical and facilities systems to wafer fabrication so as to ensure continuous supply of utilities and related facilities at the required performance level or specifications
• Formulate, implement, review and improve preventive and predictive maintenance programs for systems in charge so as to ensure that the systems function as intended at all times
• Carry out repair and troubleshooting of systems in order to restore systems to their operating conditions in the shortest possible time. Carry out root cause analysis and implement action plans to prevent recurrence
• Able to formulate effective reporting and tracking systems for monitoring of system performance and capacity usage. Recommend and implement improvement/enhancement projects where appropriate.
• Formulate, implement, review and improve operating procedures so as to ensure optimum operation of systems
• Monitor and review utility consumptions and work with users to implement projects to reduce the consumption where possible
• Knowledge of all relevant standards, legislations, codes of practice etc and ensure their compliance
• Provide guidance and training on the systems in charge to fellow colleagues so as ensure adequate working knowledge and system backup
• Ensure plant histories, drawings, data and other appropriate documentations are being generated and properly filed for future reference and review.
• Evaluate and recommend appropriate spares, consumables and other resources necessary for the day-to-day operation of the systems.
• Conduct project supervisions.

More About You:

• Master / Degree in Science, Mechanical Engineering, Building or equivalent. Preferred candidate with SCEM certification.
• 5 years of relevant working experience in semiconductor, pharmaceutical or petrochemical industry. Hands-on experience in day to day operation and maintenance essential.
• Experienced in managing cleanroom (Class 100 environment) systems
• Person shall act as SME for ACMV system. Person must have sound knowledge of operation and maintenance of Clean room areas and ACMV system
• Provide building services and maintenance, including building facilities repair and upgrading, housekeeping, landscaping and pest control.
• Knowledge of maintenance principles and good engineering practices.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Technician to be part of our Process Integration (YDD) diverse team of talent.

What you will be working on:

• To perform inline inspection and recipe setup for brightfield and darkfield inspection tools.
• To perform Optical / SEM reviews and defect classification for OOC lots
• To generate Defect Notice for OOC lots and inform respective departments
• To manage the WIP and response to request from other departments
• To assist YDD Engineer on analysis and assessment
• To perform reticle printdown inspections and check for repeater defects.

More about you:

• 3-5 years’ relevant fab experience
• Ability to multi-task and work under stress
• Willing to work on shift (Day/ Night)

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Associate Engineer to be part of our Diffusion WET Process Department diverse team of talent.

What you will be working on:

• Perform shift duties (12-hour shift) to support the running of Production in the module and ensure that process integrity for machines is in place for production
• Assist Engineers in the qualification and fine tuning of processes for production
• Trouble-shoot process related issues and minimize the time lots are on hold
• Monitor and improve on the qualified process using SPC and other statistical tools
• Co-ordinate with Specialists to ensure that work is carried out efficiently to meet module objectives and that SOPs are strictly followed
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the module
• Work with QA on internal audit
• Create job-files for metrology tools for production set-up, and housekeeping of files
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Able to perform 12-hour rotating shift
• Team Player

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a ISEP Senior Engineer to be part of our Facilities Department diverse team of talent. You will be responsible to provide support pertaining to Environmental, Health and Safety to wafer fabrication for the company

What you will be working on:

• Familiar with WSH Act, Fire Safety Act and ISO 45001, ISO14001, SS651 so as to ensure compliance to these requirements, including Statutory Equipment & Licenses.
• Ensure that the EHS Management Systems are implemented, maintained, and compliant with all applicable local legislation.
• Ensure safety case implementation and mitigative measures for Safety-Critical Events (SCE) in Major Hazard Industries (MHI).
• Develop, maintain, and periodically test emergency response plans, conduct CERT audits, and lead emergency drills including training, maintain procedure and implement all the requirement.
• Compliance with regulatory and permit/ licenses requirements, through Monitoring & Measurement and standard, work to ensure proper management and accurate reporting.
• Implement of EHS programs to improve awareness and performance towards established goals actively.
• Manage EHS incidents and non-conformance investigations, ensuring corrective and preventive actions are tracked and closed.
• Schedule and coordinate EHS related meeting, inspection and audit (External / Internal)
• Manage, schedule and coordinate EHS trainings including training and revision of training materials.
• Manage EHS reports, EHS bulletin/Alerts Manage and other communications
• Revise and write EHS procedures and work instructions.
• Manage work permit system and contractors management.
• Any other duties as assigned by Manager

More about you:

• Minimum Diploma / Bachelor in Science or Engineering in Environmental, Chemical or equivalent
• Familiar with local regulatory requirements related to workplace safety and health, and all other aspects of safety.
• Strong understanding of chemical safety regulations, ISO45001, ISO14001 and SS651
• Certificates in EHS Internal Auditing (ISO 45001, ISO 14001, SS651) will be significantly advantageous
• Registered Workplace Safety and Health Officer and Fire Safety Manager

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Engineer/ Senior Engineer to be part of our Photo Process department diverse team of talent. You will be responsible to sustain and improve all metrology tools and recipe indices to meet operations goals

What you will be working on:

• Optimize process capability to meet operation needs
• Perform Shift duties to support production
• Implement projects to upkeep process capabilities and reliabilities
• Troubleshoot process issues, establish Best known methods for future reference.
• Monitor and control process performance indices such as Cpk
• Work as a team with both equipment and manufacturing Engineers to meet module objectives
• Start-up new equipment processes which involves process characterization and development
• Establish and maintain a good audit system for both internal and QA audit on process documentation.
• Troubleshoot out-of-control situations and decide on the lot disposition in an out-of-spec situation.

More About You:

• Bachelor Degree in Engineering, Science or equivalent
• 1-3 years experience in semiconductor manufacturing environment. Fresh graduates with keen interest to develop a career in semiconductor manufacturing environment are welcome to apply.
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes.
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Posses logical thinking skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Equipment Engineer to be part of our Diffusion Department diverse team of talent.

Responsibilities:

• Responsible for daily operations in the Diffusion CMP Equipment Module.
• Perform corrective & preventive maintenance on equipment to maintain good quality & productivity performance.
• Provide 24×7 support for troubleshooting equipment & problem solving in Factory operations floor.
• Maintain documentations for equipment installation, maintenance and troubleshooting procedures for reference purposes.
• Develop continuous improvement to enhance equipment reliability and cost of ownership.
• Drive innovation in factory automation, processes and systems to improve productivity.
• Coordinate, supervise & develop a team of high performance equipment engineers.

Requirements:

• Degree in Chemical/Electrical & Electronics/Materials/Mechanical/Microelectronics/Physics or equivalent
• Familiar with Mirra polishing tools and DNS Scrubber
• Highly motivated & strong team player
• Possesses good communication and interpersonal skills
• Quality 1st mindset & strong analytical, problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Senior Engineer/Engineer to be part of our Product Engineering diverse team of talent. You will be responsible for yield, quality and reliability issues of devices.

What you will be working on:

• Resolve yield, quality and reliability issues in the qualification of new devices
• Perform pre-tapeout risk assessment and communication with Business line/ Fab on the necessary actions to eliminate/ minimize risk
• Conduct product yield analysis to identify root causes of wafer sort and final test failures
• Work with Customers and Account Managers to maximize die output
• Establish product low yield criteria and dispositioning
• Provide product engineering support to failure analysis lab for electrical fault isolation
• Provide product engineering support to reliability lab to understand and resolve reliability failures
• Compliance to safety, discipline and housekeeping rules
• Support cost reduction through yield improvement and resolving excursion
• Participate in continuous yield and productivity improvement projects

More About You:

• Bachelor's Degree in Engineering (Electrical/Electronic) or equivalent
• 2 years of relevant product engineering experiences in front-end wafer fab environment or
• In depth knowledge of semiconductor device physics, electrical & electronics engineering fundamentals & wafer fabrication processes
• Strong analytical and problem solving skills
• Good communication and interpersonal skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Senior Assistant/ Assistant to be part of our Warehouse diverse team of talent.

What you will be working on:

• Ensure safety in all aspects of work, including carrying heavy loads, binning in, and the use of ladders. Reference to HIRA procedures.
• Maintain excellent 6S housekeeping standards in daily work activities
• Perform SAP transactions for warehouse-related tasks, including packing.
• Support internal and external audits to ensure compliance with all audit requirements.
• Enforce procedures for security wafers management, including security wafer packing.
• Identify and contribute to improvement projects, submitting projects into the SSMC Transform Portal.
• Assist in data analysis and preparation for yearly strategic planning.
• Review and update all operating instructions (OIs) and standard operating procedures (SOPs).

More about you:

• Minimum GCE O Level / ITE / Polytechnic graduate.
• Preferably 1 to 2 years of logistic experience in a warehouse setting.
• Experience in semiconductor warehouse operations is advantageous.
• Demonstrated integrity and proactive work attitude.
• Proficient in SAP system operations.
• Conversant in Chinese for communication with Chinese-speaking associates.
• Accurate work with strong attention to detail.
• Excellent housekeeping skills.
• Forklift license is a plus.

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible and focus on creating an engineering plan for land development based on their calculations and any research conducted. They should have experience with AutoCAD and be able to utilize strong design skills in order to create visual aids. By utilizing strong organizational and communication skills, this candidate will also have the ability to execute a project based on the criteria outlined.

Key Responsibilities

• Take charge of facility CIVIL&MEP package concept design and RFP Preparation for 300mm semi-conductor Fabrication plant.
• Supervise and monitor EPC contractors or design consultants’ design progress.
• On-site management CIVIL&MEP package construction schedule and commissioning.

Education Qualification & Essential Experiences

• Bachelor's degree in Civil Engineering or a related STEM field.
• More than 5 years of construction project management experience, including 300mm semi-conductor Fabrication plant construction experience.
• Good written and verbal communication skills in English
• Good skills of computer software e.x. Microsoft Office, Microsoft Project, AutoCAD etc.
• Candidates with proactive attitude and responsibility good collaboration experiences in construction project.

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Key Responsibilities

• Take charge of facility MEP package concept design and RFP Preparation for 300mm semi-conductor Fabrication plant.
• Supervise and monitor EPC contractors or design consultants’ design progress.
• On-site management MEP package construction schedule and commissioning.

Education Qualification & Essential Experiences

• Bachelor's degree in Mechanical Engineering or related field.
• 300mm fab facility mechanical system operating experience, especially Exhaust / Chiller / PCW & Clean Room Systems.
• Good written and verbal communication skills in English.
• Good skills of computer software e.x. Microsoft Office, Microsoft Project, AutoCAD etc.
• Candidates with proactive attitude and responsibility good collaboration experiences in construction project.

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD) or Physical Vapor Deposition (PVD)

Key Responsibilities

• Maintain smooth daily manufacturing operations and problem solve issues promptly
• Actively collaborate with equipment and material suppliers and partners to identify technology deficiencies; develop, evaluate, and validate corrective and preventive solutions
• Qualify and sustain manufacturing processes to scale up capacity swiftly and maintain with quality and urgency
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards
• Design and execute experiments, analyze complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Implement statistical process control methods to establish and uphold robust manufacturing processes

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Electrical and Electronics Engineering, Chemical Engineering, Material Science, Physics or STEM related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

About the Company:

Addept3D is an AS9100-certified 3D printing firm that provides additive manufacturing systems and services for manufacturing large metal components and structures. With strong expertise in wire-based additive manufacturing, Addept3D employs proprietary technologies from its strategic partner, WAAM3D, to offer companies across different industries a suite of effective solutions for their manufacturing needs.

Established in 2021, Addept3D is a joint venture between Accuron Technologies and WAAM3D.

Additive Manufacturing (AM) Senior Technician (3rd Shift – 11 PM to 7 AM)

As a Senior AM Technician, you will assist the AM engineers in operating and managing the WAAM printing equipment. Your responsibilities will include:

• Set up, operate, and monitor large-scale robotic 3D printing equipment to produce parts according to Job sheet specifications.
• Prepare and load materials into the 3D printers, ensuring proper fixture, alignment and configuration.
• Monitor the printing process, perform regular inspections, and make necessary adjustments to maintain print quality and prevent issues.
• Follow standard operating procedures (SOPs) and safety guidelines to ensure a safe and efficient working environment.
• Maintain up-to-date production records and reports, accurately documenting work performed.
• Update the Supervisor on job status and report any non-conformance issues raised during fabrication.
• Perform equipment preventative maintenance.
• Perform other duties and responsibilities as assigned.

Qualifications, Key Skills & Desired Qualities:

• Higher Nitec/Nitec/ ITE Skills Certificate (ISC) or Certification in Welding or equivalent.
• 1 - 3 years of relevant experience in a manufacturing or production environment or similar advanced welding techniques.
• Able to work on permanent 3rd shift (11 PM to 7 AM).
• Able to work independently with a positive attitude and a team player.
• A good understanding of welding techniques.

If you are a skilled CNC Tool Manufacturing Technician with a passion for precision engineering and are considering a career in Additive Manufacturing (AM), we invite you to apply. Training will be provided.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Industrial Engineer to be part of our Industrial Engineer Department diverse team of talent.

What you will be working on:

• Maintain and improve capacity planning methodologies to ensure accuracy
• To achieve planned mix & capacity through equipment utilization improvement/conversion/other capacity improvement plans to ensure the plans meet operations goals
• Establish layout plans for all production equipment based on operation needs
• Ensure timely equipment installation/release for production to meet operation’s needs
• Initiate Tool-to-Tool Matching (Golden/Lemon) as well as Best-In-Class benchmarking to strie for the best perforamnce of the tools
• Update/maintain tool capacity/productivity database for capacity planning & productivity indices tracking
• Manage capital budget to reflect necessary equipment requirement for capacity mix and new technology introduction
• Establish standard costing methodologies & wkly/qtly/annual standard costing
• Cost management (forecast/tracking/improvement/modeling/analysis/benchmarking)
• People productivity management/coordination
• Initiate/lead/drive continuous improvement projects & Best-Known-Method sharing
• Strategic planning initiatives for capacity expansion, tool/people productivity improvement & cost reduction
• Lead/coordinate people productivity/automation initiatives. Headcount modelling
• Business Continuity Management and Risk assessment
• Enhance current systems, improve methodology & modelling
• Coach/mentor & train new Engineers/Associate Engineers

More about you:

• Degree in Industrial Engineering/ Mechanical/ Manufacturing
• Functional / Technical skills and knowledge: Knowledge in semiconductor processes and IE tools used in the semiconductor industry
• Computer skills : MS Office, MS Access, VBA, SQL, Oracle, Cognos, AutoCAD
• Strong communication and presentation skills
• Team player with strong problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Etch diverse team of talent. You will be responsible to manage the integration of all modules' processes and the respective derivatives.

What you will be working on:

• Responsible for new Process Development and/or Process Transfer
• Process optimization for Yield and Productivity improvement
• Troubleshoot and resolve Process related issues
• Sustain and/or improve Process Capability, CpK
• Qualify and release tools for required MFG capacity
• Qualify alternate sources for Cost improvement
• Plan and execute Engineering Projects
• Continuous improvement through participation in 10k idea, LSS & BKM to create cost effective and robust processes with quality
• Setup, monitor and maintain SPC charts
• Adhere and complete necessary documentation

More about you:

• Bachelor Degree in Engineering / Science or equivalent
• 1-3 years relevant experience in Semiconductor manufacturing environment
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Role Purpose

To frame the business case and lead the implementation of satellite operations for MODEC EPCI business

conducted by the Project Execution Business Function ("PE"). The operationalisation is expected to be made

under the remit of and will affect two Singaporean legal entities of the PE, Modec Offshore Production Systems

(Singapore) Pte Ltd ("MOPS") and its Joint Venture company Offshore Frontier Solutions Pte Ltd ("OFS"),

respectively. The position reports into the VP, Commercal of MODEC PE and is based in Singapore.

Key Accountabilities

Initiative Framing:-

Consult with relevant stakeholders, establish organisational diagnosis of PE (MOPS and OFS and overseas support). Quantify ineffeciencies & pain points. Provide strategic recommendation for satellite office structure or alternative models.

Governance Complying:-

Develop detailed business plan for the recommended strategy and required investments with the purpose of providing guidance for and support to well-informed decision making from the relevant Boards.

Collaboration:-

Collaborate with colleagues across functional disciplines in order to foster effective professional working relationships across the business, garner support and buy-in from relevant stakeholders.

Operationalisation:-

Lead the full operationalisation of the business plan in accordance with agreed timeline and with minimization of disruptions to the business. In-coutry set-ups (offices/branches/subsidiaries/partnerships etc.) to be coordinated with Corporate Legal.

Reporting / Feedback loop / Communication:-

Ensure visibility and transparency in progress reporting and any mitigation actions required, from the set-up and incorporation of the necessary structures, until the rollout of the new organizational model across PE.

This position is responsible for food production and development of food processes for Healthy Meals Manufacturer

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Food production in production kitchen
• Verify that prepared food meets requirement
• Ensure quality control and presentation of the food
• Adhere to safety procedures
• Ensuring proper handling and storage of all food items in accordance with the standards and sanitation regulations
• Handle equipment, appliances, supplies and tools
• Production of hot and cold dishes and executing request based on required specifications
• Maintain cleanliness and the hygiene of the kitchen
• Understanding with and complying with the mandatory hygiene standards and requirements
• Perform any other duties assigned

REQUIREMENTS

• Relevant experience, required
• Ability to work independently and in a team
• Physically and mentally fit and able to work in a fast paced and demanding environment
• Basic food hygiene certificate
• Willing to work shifts, weekends and public holidays
• Working Hours : 6 days work week

About Sgcarmart

Sgcarmart is an established automotive media company in Singapore. Our site reaches 2.6M visitors monthly, making it the top-ranked local automotive website. We are on the lookout for talented individuals to join our growing team!

The Video Production Intern Role:

Are you a student pursuing a Diploma or Degree in Media Production or Digital Film? Sgcarmart is looking for a Video Production Intern to support the Stories & Branded Content team (SBC) in producing car review videos and car-related content for Singapore’s largest automotive on YouTube, with more than 400,000 views a month!

During this internship, you will have hands-on opportunities to learn and put into practice essential video production skills such as ideation, storytelling, pre-production, filming, editing, publishing, and using data analytics to track and improve performance. You will have exclusive access to the latest cars launched in Singapore, build a diverse and exciting video production portfolio, and expand your professional network in the automotive industry. You will also be given autonomy to film and edit engaging car-related content for Sgcarmart’s Tik Tok channel.

If you are passionate about filmmaking, have a strong interest in cars, and would like to be part of the 100-strong Sgcarmart team, look no further! Be part of this exciting team as the local automotive industry shifts up a gear to go green and push for electric vehicle adoption!

Requirements:

· Current Diploma or Degree student in Videography / Media Production / Film Production or relevant disciplines

· Proficiency in Adobe Premiere Pro

· Basic knowledge of Adobe Photoshop

· Basic knowledge of photography and videography terms like shutter speed, aperture, ISO, frame rate, audio levels

· Basic knowledge in operating Sony Alpha cameras for filming

· Be comfortable with shooting outdoors, reviewing and adjusting composition settings on the go (It sounds like a lot of hard work but we guarantee it will be twice the fun!)

Optional but advantageous skills and traits:

· A good sense of humor!

· Up to date with social media trends and current affairs news

· Basic understanding of audio mixing

· Some experience with using a gimbal stabiliser

· Eye for scene lighting and design

Internship Start Date:

· Immediate

Internship Duration:

· 6 Months preferred

Internship Allowance:

· $800 - $1,000

Work Location:

151 Lor Chuan, Lobby D, #04-04, New Tech Park S(556741)

Working Hours:

Mon to Fri, 10am to 7pm

Job Description:

• Assisting in the media publishing and content creation for production team/marketing
• Coordinate pre-production duties
• Coordinate production work
• Prepare equipment and accessories for video production
• Setup camera, lighting and production peripheral equipment
• Partake in content creation discussion and execution
• Establish project timeline, activities, resource plans, cost estimates
• Gain consensus on project goals, objectives and deliverables
• Acquire project requirements such as crew, information, agreements, material, or props as needed

Job requirements:

• Above 18 years old
• Positive attitude
• Interest in video editing/video production (Eg. Premiere Pro, Final Cut Pro)
• Able to handle heavy equipment
• Able to commit to weekends
• Team player
• No minimum experience required
• An added benefit if have relevant experience or a portfolio

Job Responsibilities and Duties

• Assist to execute daily production control activities, such as Production Scheduling, Line Balancing and manpower planning.
• Assist to execute daily quality control activities, such as Adherence to all SOP requirements as per respective regulatory guidelines GMP, Halal, GDP Medical Device & Therapeutic products.
• To ensure documentation and records are proper and complete.
• To ensure housekeeping & cleaning of the production equipment’s and facilities are completed.
• To carry out production activities as per production operators and hand packers.
• To execute maintenance activities.
• Any other duties assigned by superior / management.

Key Performance Indicators: -

• Ensure daily production targets are carried out and timely and accurately
• Ensuring all documents and records are accurate and complete.
• Ensure production equipment’s and facilities are carried out daily.