• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

Job Title: Production Planner (ID5086)
Location: Serangoon
Working Hours: Mon to Fri 8.30am - 6pm
Salary: $3200 to $4200

Job Description:
• Plan materials requirement according to production schedule and to ensure optimal inventory levels
• Monitor production schedule to meet delivery requirement
• Work closely with Testing team and arrange production staff to work according to schedule

Requirement:
• Diploma in Manufacturing/Production/Electronics Engineering
• Minimum 2 years of relevant work experience in electronics manufacturing industry
• Able to communicate and work closely with internal customers, buyer and sub-contractors
• Experience with ERP system
• Team player with supervisory, interpersonal and communication skills

Job Responsibilities:

• Manage day to day operation based on inventory needs, new product introduction, equipment efficiency and resource optimization while maintaining GMPs compliance.
• Streamline company’s production process in order to maintain an efficient and effective team.
• Perform Quality Measures of staff performance.
• Assist in Internal Quality Audits (IQA).
• Plan, organize, direct and control of daily production with production supervisor.
• Evaluate, improve product quality, production efficiency, work procedures and safety enhancement in accordance to food safety and GMPs.
• Manage cost performance and be responsible for daily production yield and output.
• Staff development and improve staff competency.
• Preparing monthly production report, provide support for new product launch and to review documents and reports.

Job Requirement:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in any field.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Preferably Senior Executive specialized in Manufacturing/Production Operations or equivalent.
• FMCG / Food Manufacturing experiences will be advantage
• Knowledge of ISO22000:2005, BRC issue 8, HACCP
• Knowledge of Business Central 365 (Microsoft Dynamic Navision)
• Microsoft office (excel, powerpoint, outlook)

Interested applicant may send your cv/ resume via whatsapp 84597671

We are seeking a motivated and proactive Electrical & Electronics Engineering/ Electronics & Computer Engineering Intern to join our dynamic engineering team in Singapore. The intern will gain valuable hands-on experience in the design, development, testing, and troubleshooting of electrical and electronic systems. You will be working closely with experienced engineers and contribute to the ongoing development of projects that involve circuit design, hardware testing, and product development.

Role and Responsibiltities :

Circuit Design & Analysis: Assist in designing electrical and electronic circuits, including power supplies, analog and digital circuits.

Testing & Validation: Participate in testing prototypes, conducting experiments, and validating design specifications against real-world performance.

Hardware Prototyping: Help build and assemble prototype systems for various projects, ensuring accuracy and compliance with engineering standards.

Troubleshooting & Problem-Solving: Support the identification and resolution of issues in electrical/electronic systems, including testing components and sub-systems.

Documentation & Reporting: Assist in preparing technical documentation, test reports, and design specifications to support ongoing projects and future development efforts.

Collaboration: Work alongside with software developers/ engineer, and project managers, to develop integrated solutions.

Research & Development: Contribute to ongoing research in the field of electrical/electronics engineering, staying updated on emerging technologies and industry trends.

Ad-hoc Projects: Assist with various other engineering-related tasks, such as simulation work, software tools development, and equipment calibration.

Requirements:

Educational Background:

Currently pursuing a Diploma or a Bachelor’s degree in Electrical and Electronics Engineering, Electronics and Computer Engineering, or a related field.

Technical Skills:

Knowledge of circuit design and analysis.

Familiarity with Microsoft office e.g. Word, Excel, Powerpoint.

Basic understanding of microcontrollers (e.g., Arduino, Raspberry Pi).

Hands-on experience with oscilloscopes, multimeters, power supplies, and other lab equipment.

Understanding of embedded systems, PCB design, or power electronics.

Knowledge of industry standards and regulatory requirements for electrical systems.

Experience with CAD tools (e.g., AutoCAD ) for circuit board design is a plus.

Programming Skills:

Familiarity with programming languages (e.g., C ++, Python ).

Basic knowledge of embedded systems development is a plus.

Problem-Solving: Strong analytical and problem-solving abilities with attention to detail.

Communication Skills:

Good written and verbal communication skills to effectively collaborate within a team.

Team Player:

Ability to work in a team-oriented environment while also demonstrating initiative and independence.

Benefits:

Exposure to real-world engineering projects.

Mentorship and guidance from experienced professionals in the field.

Opportunity to develop skills in both hardware and software aspects of electrical/electronic systems.

Job Title: Production Planner (ID8325)
Location: Kaki Bukit, Singapore
Working Hour：Monday to Friday 9am - 6:30pm
Salary: $2200 - $2500

Job Description:
- Assist in Project planning, defining scope and maintaining project schedules.
- Work with Sales team, Purchasing, Production operation, to review Scheduling and Planning meetings or project tasks, ensuring all necessary parties are infomed and available.
- Coordinate plannind and scheduling of preventive maintenance tasks, ensuring timely dispatch to customers.
- Develop and execute production schedule to meet customer orders.
- Develop, implement and maintain work instructions for current and new projects.
- Adjust schedules based on site conditions and propose changes for variances.

Requirement:
- Minimum 2 years of work experience in the manufacturing industry
- Relevant working experience in manaufacturing will be an added advantage
- Strong planning and organizing ability
- Able to demonstrate strong hands-on Microsoft Excel and access capabilities

If you are looking to expand your career in Manufacturing and Operations field, Emerson has an excellent opportunity for you! We are seeking a Senior / Manufacturing Supervisor who can facilitate optimizing processes for warehouse operations and productivity improvements through initiatives.

In this Role, Your Responsibilities Will Be:

· Lead all aspects of Production Operations to fulfill customer orders on time.

· Improve processes within Production to reduce waste and lead time.

· Drives Continual Improvement Initiatives to ensure Zero-defect system and Eliminate workflow interruptions.

· Accountable for inventory accuracy in Production WIP and Finished goods.

· Drive efficiency and speed improvement for Production and Material flow processes through digitalization and automation initiatives.

· Backup for Production Supervisors to implement accurate and timely completion of work orders.

· Responsible for maintaining high safety and 5S standards.

· Ensure compliance of workplace safety rules, including but not limited to the usage of personal protective equipment, if provided to you, while working; not involved in any unsafe or negligent act that may endanger peers or oneself; reporting unsafe work conditions and providing suggestions to improve safety/ health at work, as needed.

Who You Are:

You show a tremendous amount of initiative in tough situations; are outstanding at spotting and seizing opportunities. You always keep the end in sight; put in extra effort to meet deadlines. You model and encourage the expression of diverse ideas and opinions. You get the most out of available resources and secures rare resources others can’t get.

For This Role, You Will Need:

· Minimum 3 years of working experience in a manufacturing and warehousing companies.

· Great teammate who can collaborate with other functional teams to get results and meet business goals.

· A person with good communication and problem-solving skills.

Preferred Qualifications that Set You Apart:

· Degree/Diploma or equivalent experience in Manufacturing, Production, Mechanical or Electrical Engineering or any related field.

· Knowledge of Lean, SPC tools or Oracle business system will be an advantage.

Please submit your application on or before 27 October 2024.

Our Offer To You:

By joining Emerson, you will be given the opportunity to make a difference through the work you do.

Emerson's compensation and benefits programs are designed to be competitive within the industry and local labor markets. We also offer a comprehensive medical and insurance coverage to meet the needs of our employees.

We are committed to creating a global workplace that supports diversity, equity and embraces inclusion.

We attract, develop, and retain exceptional people in an inclusive environment, where all employees can reach their greatest potential. We are dedicated to the ongoing development of our employees because we know that it is critical to our success as a global company.

We have established our Remote Work Policy for eligible roles to promote Work-Life Balance through a hybrid work set up where our team members can take advantage of working both from home and at the office.

Safety is paramount to us, and we are relentless in our pursuit to provide a Safe Working Environmentacross our global network and facilities.

Through our benefits, development opportunities, and an inclusive and safe work environment, we aim to create an organization our people are proud to represent.

Our Commitment to Diversity, Equity & Inclusion

At Emerson, we are committed to fostering a culture where every employee is valued and respected for their unique experiences and perspectives. We believe a diverse and inclusive work environment contributes to the rich exchange of ideas and diversity of thoughts, that inspires innovation and brings the best solutions to our customers.

This philosophy is fundamental to living our company’s values and our responsibility to leave the world in a better place. Learn more about our Culture & Values and about Diversity, Equity & Inclusion at Emerson.

If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: [email protected].

Job Responsibilities

· Read, learn, understand, and interpret drawing/blueprints and work instructions, and other instructions written or verbal, to complete the crating of tools/products or components according to established guidelines and quality standards.

· Manage inventory following established guidelines and procedures including labeling and locating parts, picking parts from appropriate locations specified, and recording and communicating inventory levels.

· Help customers resolve shipment issues and complaints when they arise. Maintain shipment paperwork, records, and digital databases and perform additional administrative, clerical, or supervisory duties as requested.

· Support internal and other relevant departments (e.g. Planners and productions) to ensure all orders/shipments are fulfilled on time. The need to coordinate with CM to perform GR, coordinate with traffic and third-party warehouse to re-label shipment, and release to forwarders for shipment arrangement.

· Fulfill orders by packaging necessary materials and preparing them for shipment. Identifying and locating the right products during the shipping process Recording inventory status, and making sure deliveries properly match work orders.

· Collaborating with internal departments to locate missing packages, fix incorrect deliveries, and replace damaged products. Practice problem-solving and troubleshooting techniques as part of a team responsible for realizing continuous improvement to products and processes.

· Maintain a clean and organized work area, and workplace safety, and maintain all equipment according to maintenance plans and established procedures.

· Require supporting operations during weekends and public holidays. Undertake any other ad-hoc duties assigned by the superior.

Job Requirements

• Diploma or its equivalent
• PC literate. Preferably with experience in crating/capital equipment handling.
• A team player with the ability to multi-task and organize work systematically.
• Process Improvement mindset
• Ability to work under pressure in a fast-changing and demanding environment.
• Hardworking, self-driven, willing to learn, and able to take initiative.
• Knowledge of SAP and having a forklift license will be an added advantage.

• Calculate total daily production quantity output and check balance quantity per plan order.
• Encode transfer note finished goods (FG) and work in process (WIP) to the MRP.
• Daily checking of the part inventory stock on the MRP.
• Record the quantity of incoming insert that will use in the production.
• Prepare percentage planning yielding weekly report and percentage production efficiency weekly report.
• Prepare report on daily rejection part and record in the non-conforming report.
• Coordinate with the planner regarding production plan of the production.
• Prepare material weekly inventory.
• Prepare label that will use in the production.
• Prepare overtime and leave form of the production personnel and submit to HR department.
• File production related document like part samples, sample approval form and injection molding parameter data to the filing cabinet.
• Withdraw production office supplies every week in the administration office.
• Follow ISO 9001, ISO 13485 and safety rules and regulations.
• Implement 5S and good housekeeping in the production area.
• Performs other tasks assigned by his supervisor to achieve department objective.

Requirements:

• At least secondary level can write and speak simple English.
• At least 6 months experience in clerical works.
• With basic knowledge in computer MS office.

About Sgcarmart

Sgcarmart is an established automotive media company in Singapore. Our site reaches 2.6M visitors monthly, making it the top-ranked local automotive website. We are on the lookout for talented individuals to join our growing team!

The Video Production Intern Role:

Are you a student pursuing a Diploma or Degree in Media Production or Digital Film? Sgcarmart is looking for a Video Production Intern to support the Stories & Branded Content team (SBC) in producing car review videos and car-related content for Singapore’s largest automotive on YouTube, with more than 400,000 views a month!

During this internship, you will have hands-on opportunities to learn and put into practice essential video production skills such as ideation, storytelling, pre-production, filming, editing, publishing, and using data analytics to track and improve performance. You will have exclusive access to the latest cars launched in Singapore, build a diverse and exciting video production portfolio, and expand your professional network in the automotive industry. You will also be given autonomy to film and edit engaging car-related content for Sgcarmart’s Tik Tok channel.

If you are passionate about filmmaking, have a strong interest in cars, and would like to be part of the 100-strong Sgcarmart team, look no further! Be part of this exciting team as the local automotive industry shifts up a gear to go green and push for electric vehicle adoption!

Requirements:

· Current Diploma or Degree student in Videography / Media Production / Film Production or relevant disciplines

· Proficiency in Adobe Premiere Pro

· Basic knowledge of Adobe Photoshop

· Basic knowledge of photography and videography terms like shutter speed, aperture, ISO, frame rate, audio levels

· Basic knowledge in operating Sony Alpha cameras for filming

· Be comfortable with shooting outdoors, reviewing and adjusting composition settings on the go (It sounds like a lot of hard work but we guarantee it will be twice the fun!)

Optional but advantageous skills and traits:

· A good sense of humor!

· Up to date with social media trends and current affairs news

· Basic understanding of audio mixing

· Some experience with using a gimbal stabiliser

· Eye for scene lighting and design

Internship Start Date:

· Immediate

Internship Duration:

· 6 Months preferred

Internship Allowance:

· $800 - $1,000

Work Location:

151 Lor Chuan, Lobby D, #04-04, New Tech Park S(556741)

Working Hours:

Mon to Fri, 10am to 7pm

• Operate precision CNC turning/milling machine
• Perform CAD/CAM programming
• Interpret Engineering Drawings and Feature of Control Symbols
• Simple setting up of work piece and tooling set up
• Check and maintain machinery daily to ensure functionality
• Able to handle 8" to 12" chuck CNC Turn/Mill Machine, Fanuc control

Requirement

• Proficient in Quality Consciousness with the ability to meet productivity goals
• Must have good interpersonal communication skills and a positive team attitude
• Preferably 3 to 5 years experience in setting up and operating CNC milling / Turning centre

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

Responsibilities:

• Liaise with Producers/Reporters and advise on the technical setup for production.
• Operate various types of cameras as required for the production.
• Basic working knowledge of location lighting.
• Basic knowledge of location sound recording.
• Perform basic maintenance and troubleshooting of the camera equipment after every usage.

Requirements:

• NITEC or Diploma in Digital Audio,Video Production, Electronic or Film Production.
• Possess basic Knowledge of non linear editing and file transfer protocol.
• Class 3 Driving Licence is an added advantage.
• At least 2 years of related working experience would be preferred.

Responsibilities

1. Collect and Collate production data for reports.

2. Update and Generate production reports.

3. Assist in production monthly stock take.

4. Oversee department's administration and document filing

5. Assist in production planning.

6. Assist HR in verifying and validating production manpower data (eg attendance, leave, staff OT, communication, PPE exchanges)

Requirements:

1. Diploma holder in any discipline

2. Minimum 2 years experience in a similar role

3. Familiar with MS Excel (Experience with Navision desired)

4. Comfortable interacting with blue collared workers

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Senior/ Associate Engineer to be part of our Integration Department diverse team of talent. You will be responsible fab yield excursions and improvements.

What you will be working on:

• Assist Integration engineers in 7*24 support of Fab Yield Improvement
• Handle fab yield excursions
• Handle all Integration signals
• Analyze and issue excursion notice to the organisation
• Perform and support root cause analysis
• Monitor and report fab baseline yield performance
• Create Yield and SPC reports
• Support baseline excursion recovery
• Support Engineering activities
• Receive and follow Engineering Requests
• Report and hand over results

More About You:

• Diploma in Electrical/ Electronics Engineering or equivalent
• 3 - 5 years' relevant fab experience
• Willing to perform 12 hours shift
• Good interpersonal and communication skills
• Good team player

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

· Oversee food preparation method and maintain a consistent standard of products with compliance to SOP at all times

· Monitor and follow up on Central Kitchen’s overall hygiene standards, repairs & maintenance and food security issues

· Responsible for enforcing all hygiene all hygiene/health/safety rules and regulations (in Central Kitchen) in accordance to ISO22000:2018 standards and SFA

· Ensure all storage products (raw, semi and finished) are stored at correct storage conditions, properly labelled and are in FIFO & FEFO system

· Supervise & control storage conditions and truck delivery temperature to all outlets according to Food Safety requirements

· Investigate/handle any complaints regarding our products from outlets or customers

· Conduct food safety & food hygiene meetings and training as and when required

· Supervise stewarding in their daily upkeep of crockery and kitchen cleanliness

· Maintain ISO22000:2018 manual, documents and files by updating and upkeeping of all records

· Any other duties assigned by superior

· Diploma in Food Science with 1-2 years of relevant experience in Central Kitchen Management

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Quality & Reliability Engineering diverse team of talent. You will be responsible for end-to-end notification and communication process on product and process changes.

What you will be working on:

• Responsible in managing the end-to-end notification and communication process on product and process changes.
• Responsible in ensuring that changes are effectively communicated to customers through working with various stakeholders including the account facing teams & process owners.
• Be the Facilitator of engineering change requirements to ensure that both internal and customer requirements must be met.
• Manage the ECN scorecards with respect to implementation and closure with the relevant stakeholders.
• Tracking implementation progress and reporting back to management.
• Be the Facilitator for customer concessions and work with internal stakeholders/customers until concession closure.
• Participates in inter-departmental cross-functional projects.
• Analyzing common problems / root causes with possible suggestions for further improvements.

More About You:

• Degree in Chemical Engineering / Chemistry / Materials Science / Physics / Electrical & Electronic Engineering or equivalent.
• Minimum 3 years of relevant experience in semiconductor or automotive industry.
• Preferably with experience in SPC tool.
• Preferably with experience in Change Management & Concession Management

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Sustainability Engineer (ESG) to be part of our Supply Chain Department diverse team of talent. You will be responsible to support Company’s Environmental, Social and Governance (ESG) projects.

What you will be working on:

Project Management

- Lead and manage ESG projects & initiatives from inception to completion, ensuring alignment with corporate sustainability goals.

- Develop project plans, timelines, and budgets, and coordinate resources effectively.

- Prepare Capex Justification presentation in an accurate and timely manner to facilitate Management Team decision making

- Project lead in a cross functional team to ensure project schedule is executed in a timely manner and meeting project budget

Supply Chain

- Assist and take lead to drive the initiatives especially on Scope 3 Emissions

- Assess and quantify upstream and downstream emissions from the organization’s value chain, including suppliers, products, and waste disposal.

- Collaborate with suppliers and partners to develop and implement emission reduction initiatives, such as sustainable sourcing practices and transportation efficiency improvements.

- Review Supply Chain SOP & OI and ensure they are updated to ESG requirements

Reporting and Compliance

- Support Supply Chain Department on Company’s requirements for reports on sustainability metrics, including greenhouse gas emissions, energy consumption, and waste generation.

- Ensure compliance with regulatory requirements and industry standards related to sustainability and environmental management.

- Handle Compliance, Internal, Exernal and Customer audits to ensure compliance

- Liaison with related government bodies on grant and commercial apects

Continuous Improvement:

- Monitor and evaluate the effectiveness of sustainability initiatives and recommend improvements based on data analysis and industry best practices.

- Stay updated on emerging trends, technologies, and regulations in sustainability and incorporate relevant advancements into project strategies.

More about you:

• Degree in Chemical/Gas, Mechanical, Environmental, health and safety & other engineering.
• Possess knowledge on ESG, IPCC, RCA
• Preferably 4-5 years purchasing experience or engineering experience in a front end semiconductor plant .
• Knowledge and relevant experiences in Conflict Mineral, Green Procurement is a bonus.
• Knowledge in handling audits for Scope 1 emissions is a bonus

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer/ Senior Engineer to be part of our Thin Film department diverse team of talent. You will be responsible for supporting Thin Film Equipment startup, maintenance and related activities to support daily production and achieve operation targets.

What you will be working on:

• Support CVD/PVD equipment engineering related activities to achieve operation targets and meet company objectives
• Participate in Continuous Improvement for Cost, Yield, Productivity and Uptime
• New Equipment Startup and Relocation to support Production Plan
• Tool Ownership and accountability for Uptime, Wafers scrap, Parts Management, Equipment Down Memo Reduction
• Troubleshoot and resolve Equipment issues to support daily production
• Review and optimize equipment maintenance procedures
• Consumable and spare management ensure adequate provision
• Participate in technology transfer from motherfab
• Participate in implementation of TSMC/NXP BKMs and generate SSMC BKMs
• Update of OIs and SOPs to document real and best practices
• Preventive Maintenance Planning and alignment of schedule with Manufacturing
• Conduct Training and certification for new PM crew in terms of Hands on and Theory
• Drive Manufacturing for Monitoring Time reduction to improve Uptime
• Lead/ Participate in Transform Platform and generate LSS, BKMs and Trade Secrets for value creation for the company
• Able to perform weekend 12-hour shift or Swing Shift or any shift pattern as defined by Manager

More About You:

• Bachelor in Engineering (Mechanical/Mechatronic/Electrical/Electronic)
• 1-3 years’ experience in semiconductor manufacturing environment.
• 5 years direct experience in CVD equipment for Diploma holders
• Knowledge in the following tool types AMAT Endura , Centura WxZ, Novellus Altus, Tel Scrubber, Jusung Eureka
• At least 3 years’ experience in same field will be consider for senior position
• A strong background and experience in semiconductor manufacturing

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Quality & Product Engineering diverse team of talent. You will be responsible for Quality control for Facilities and Fab use - UPW, Chemicals, wafers, Fab Environment and Incoming quality check of materials.

What you will be working on:

• Liaise and support fab engineering modules on requirements for ad-hoc requests
• Communicate to end user and follow up for OOC/OOS issues
• Manage, maintain and verify functionality of equipment and perform troubleshoot where required
• Responsible and accountable for work quality and integrity in all assigned tasks
• Participate in continuous improvement programs/ initiate action for continuous improvement in work processes, safety and quality standards
• To monitor and improve the performance of analytical tools and methods for analysis
• Responsible for safety and housekeeping of Lab work areas and environment
• Update in meetings for Pre alert/ Out of control/ shutdown cases
• Update and maintain documents for Lab operation and analytical tools
• Update and reporting of lab operation and issues
• In charge of arrangement for Lab manpower
• Internal audit of lab

More About You:

• Degree in Chemistry/ Material Science or equivalent
• 1- 3 year experience in semiconductor, manufacturing, Chemical Lab or/ and quality related experience preferred
• Basic to intermediate knowledge of analytical techniques
• Knowledge of Microsoft Excel, Win Word, Powerpoint, Tableau and Excel VBA
• Knowledge of requirements IATF16949, ISO17025, ISO 14000, OSHA 18000 will be an added advantage

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD) or Physical Vapor Deposition (PVD)

Key Responsibilities

• Maintain smooth daily manufacturing operations and problem solve issues promptly
• Actively collaborate with equipment and material suppliers and partners to identify technology deficiencies; develop, evaluate, and validate corrective and preventive solutions
• Qualify and sustain manufacturing processes to scale up capacity swiftly and maintain with quality and urgency
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards
• Design and execute experiments, analyze complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Implement statistical process control methods to establish and uphold robust manufacturing processes

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Electrical and Electronics Engineering, Chemical Engineering, Material Science, Physics or STEM related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Associate Engineer to be part of our Photolithography Equipment diverse team of talent.

What you will be working on:

• To assist the Engineers to sustain and improve process integrity and Cpk indices to meet operations goals
• Perform shift duties (12-hour shift) to support the running of production in the module module and ensure that process integrity for machines is in place for production
• Assist Engineers in the fine tuning of processes for production
• Assist in trouble-shooting process related issues and minimize the time lots are on hold
• Monitor qualified process using SPC and other statistical tools
• Assist Specialists to ensure that work is carried out efficiently to meet module objectives and that SOPs are strictly followed
• Assist in implementing process improvement projects
• Participate in QIT programs to improve productivity and output quality of the Module
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• 2 – 5 years working experience in electrical / electronics industry
• Fresh diploma holders will also be considered
• Able to perform 12-hour rotating shift
• Team Player

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Industrial Engineer to be part of our Industrial Engineer Department diverse team of talent.

What you will be working on:

• Maintain and improve capacity planning methodologies to ensure accuracy
• To achieve planned mix & capacity through equipment utilization improvement/conversion/other capacity improvement plans to ensure the plans meet operations goals
• Establish layout plans for all production equipment based on operation needs
• Ensure timely equipment installation/release for production to meet operation’s needs
• Initiate Tool-to-Tool Matching (Golden/Lemon) as well as Best-In-Class benchmarking to strie for the best perforamnce of the tools
• Update/maintain tool capacity/productivity database for capacity planning & productivity indices tracking
• Manage capital budget to reflect necessary equipment requirement for capacity mix and new technology introduction
• Establish standard costing methodologies & wkly/qtly/annual standard costing
• Cost management (forecast/tracking/improvement/modeling/analysis/benchmarking)
• People productivity management/coordination
• Initiate/lead/drive continuous improvement projects & Best-Known-Method sharing
• Strategic planning initiatives for capacity expansion, tool/people productivity improvement & cost reduction
• Lead/coordinate people productivity/automation initiatives. Headcount modelling
• Business Continuity Management and Risk assessment
• Enhance current systems, improve methodology & modelling
• Coach/mentor & train new Engineers/Associate Engineers

More about you:

• Degree in Industrial Engineering/ Mechanical/ Manufacturing
• Functional / Technical skills and knowledge: Knowledge in semiconductor processes and IE tools used in the semiconductor industry
• Computer skills : MS Office, MS Access, VBA, SQL, Oracle, Cognos, AutoCAD
• Strong communication and presentation skills
• Team player with strong problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Industrial Engineering department diverse team of talent. You will be responsible for supervising and coordinating production activities to meet daily and monthly manufacturing goals.

What you will be working on:

1. To achieve operation targets to meet company objectives throug
   1. Capacity: Support equipment capacity improvement/verification.
   2. Productivity: Support equipment productivity improvement.
   3. Cost: Support cost management people productivity activities.
2. Capacity check (demand/wafer start alignment) & equipment performance reporting.
3. Fab layout expansion plan & coordinate layout change activities.
4. Ensure timely equipment installation/release for production to meet operation’s needs.
5. Identify/Initiate/Track process equipment productivity improvement activities.
6. Update/maintain equipment capacity/productivity/cost database for capacity planning, productivity indices and cost tracking.
7. CAPEX planning/tracking/reporting to meet company objectives.
8. Weekly new part ID standard costing and execution.
9. Operations cost tracking/reporting.
10. People productivity support/coordination (thru automation/workflow simplification).
11. Records update & management

More About You:

• Degree in Industrial Engineering/ Mechanical/Manufacturing
• Knowledge of wafer fabrication procees, equipment configurations, layout planning, capacity planning & WPH, as well as semiconductor process flow
• Familiar with C+
• Strong communication and presentation skills
• Team player with strong problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.Maintain and improve capacity planning methodologies to ensure accuracy

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a ISEP Senior Engineer to be part of our Facilities Department diverse team of talent. You will be responsible to provide support pertaining to Environmental, Health and Safety to wafer fabrication for the company

What you will be working on:

• Familiar with WSH Act, Fire Safety Act and ISO 45001, ISO14001, SS651 so as to ensure compliance to these requirements, including Statutory Equipment & Licenses.
• Ensure that the EHS Management Systems are implemented, maintained, and compliant with all applicable local legislation.
• Ensure safety case implementation and mitigative measures for Safety-Critical Events (SCE) in Major Hazard Industries (MHI).
• Develop, maintain, and periodically test emergency response plans, conduct CERT audits, and lead emergency drills including training, maintain procedure and implement all the requirement.
• Compliance with regulatory and permit/ licenses requirements, through Monitoring & Measurement and standard, work to ensure proper management and accurate reporting.
• Implement of EHS programs to improve awareness and performance towards established goals actively.
• Manage EHS incidents and non-conformance investigations, ensuring corrective and preventive actions are tracked and closed.
• Schedule and coordinate EHS related meeting, inspection and audit (External / Internal)
• Manage, schedule and coordinate EHS trainings including training and revision of training materials.
• Manage EHS reports, EHS bulletin/Alerts Manage and other communications
• Revise and write EHS procedures and work instructions.
• Manage work permit system and contractors management.
• Any other duties as assigned by Manager

More about you:

• Minimum Diploma / Bachelor in Science or Engineering in Environmental, Chemical or equivalent
• Familiar with local regulatory requirements related to workplace safety and health, and all other aspects of safety.
• Strong understanding of chemical safety regulations, ISO45001, ISO14001 and SS651
• Certificates in EHS Internal Auditing (ISO 45001, ISO 14001, SS651) will be significantly advantageous
• Registered Workplace Safety and Health Officer and Fire Safety Manager

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Summary: The Accounts Payable & CAPEX Accountant is responsible for managing the day-to-day accounts payable functions, processing invoices, ensuring timely payments and tracking capital expenditure. This role requires a detail-oriented professional with strong accounting knowledge, excellent organizational skills, and the ability to communicate effectively with vendors, and internal stakeholders.

Key Responsibilities:

1. Accounts Payable (AP):

• Process and verify vendor invoices, ensuring accuracy, proper approvals, and compliance with company policies and tax regulations.
• Maintain AP ledger, ensuring accurate recording of transactions and timely payments to vendors.
• Reconcile AP accounts, investigate discrepancies, and resolve issues with vendors and internal departments.
• Prepare and process electronic transfers and payments.
• Reconciling vendor tax invoices with recorded tax amounts and ensuring accuracy for GST submission.
• Support month-end close activities related to accounts payable, including account reconciliations and accruals.

2. CAPEX Spending:

• Monitor and track capital expenditure (CAPEX) projects to ensure they are executed within the approved budget and reporting expenditure related to long-term assets.
• Assist in budgeting capital needs for projects and provide insights on capital spend trends.
• Identify qualifying capital expenditure according to accounting standards.
• Capitalize appropriate assets on the balance sheet and ensure correct depreciation methods and useful life estimates are applied.

3. Reporting & Compliance:

• Prepare reports on AP and CAPEX and other relevant financial data as needed.
• Ensure compliance with relevant accounting regulations, internal controls, and company policies.

Qualifications and Experience:

• Bachelor’sdegree in Accounting, Finance, or a related field.
• 2+ years of experience in accounts payable and/or CAPEX management.
• Strong understanding of GAAP and accounting principles related to AP.
• Proficiency in accounting software (e.g., SAP, Oracle, QuickBooks) and Excel.
• Strong attention to detail, organizational, and analytical skills.
• Independent, proactive with a positive and hands-on attitude.
• Excellent communication and interpersonal skills to effectively interact with vendors and team members.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Senior Engineer to be part of our Facilities Department diverse team of talent. You will be the Subject-Matter-Expert for both the UPW & Chemical Systems.

What you will be working on:

• Plan and execute preventive and corrective maintenance activities for chemical, slurry and gas systems including chemical waste collection systems to ensure maximum equipment uptime and reliability.
• Manage on-site Total Gas and Chemical Management (TGCM) and Bulk Gas Plant contractors to ensure excellence in operations, maintenance, quality standards and safety compliance.
• Respond to issue and perform troubleshooting with on-site TGCM team, Bulk Gas Plant operations team and contractors.
• Work with Manufacturing and Quality teams on excursion root cause identification, elimination and prevention.
• Initiate, evaluate, plan, design and supervise all improvement or upgrading or new projects for chemical, slurry, gas and chemical waste system.
• Include good design practice for state-of-the-art system designs, system capacity and capability analysis, planning for future requirements, and code compliance.
• Work in a team effort with other engineering, operations, maintenance, and construction disciplines to provide detailed designs and specifications for the installation of new capital equipment and systems.
• Identify and implement new technologies for chemical, slurry and gas systems for process breakthrough.
• Carry out cost estimates, analysis, cost and schedule estimates as well as justification of proposed projects.
• Responsible for maintaining various administrative and engineering database in support of job tracking, engineering data, and costing.
• Provide support for new chemical and gas evaluations.
• Plan and execute specialty gas system release/unhooking.
• Review and improve Operation and Maintenance Standard Operating Procedure and Risk Assessment.
• Support ISEP and Facilities operations concerning chemical, slurry and gas management/operations/storage/maintenance works.
• Carry out FMEAs (Failure Model and Effect Analysis), eliminate single points of failure and mitigate risks.
• Analyze systems to identify improvements that will result in better performance, efficiency gains, reduced maintenance, and cost savings.
• Work with Quality department to ensure the quality of chemicals, slurries and spec gas.
• Be aware of and perform all works in accordance with company safety guidelines.
• Benchmark with other Micron sites on operational, procedural, engineering, and design BKM of Facilities buildings and systems.

More About You:

• Master/ Degree in Chemical Engineering
• Min 4 years of relevant experience in Semiconductor Wafer Fab environment
• Hands-on experience in day-to-day operation and maintenance is essential
• Functional / Technical Skills and Knowledges:
• Operation and maintenance of Ultrapure Water, Wastewater, Chemical, Gas and Bulk Gas Systems

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.