Job Description

• Accountable for all technical and quality issues which are related to assigned electron optics subassemblies.
• To handle daily production escalation. Provide strong technical support to production team to resolve issues and ensure system meeting shipment schedule as planned.
• Dispose non-conformance products and closely work out with supplier on the quality and process continuous improvement.
• Response to failure analysis and provide comprehensive analysis report to field support team or customers. Provide and implement the corrective action to fix the problem in systematic way.
• Work with material team on the product cost reduction, EOL component replacement, relocation of manufacturing site, and any engineering support needed from them.
• Writing ECO on any product change and ensure ECO implemented properly.
• Answerable to supplier quality and OOBQ yield. Audit supplier’s process and quality control if necessary.

Job Requirements

• PhD/Master’s/Bachelor’s Degree in electron Optics/Mechanical engineering / System Engineering or equivalent
• Knowledge in high-vacuum systems and experience in high voltage electronics
• Preferred experience in electron optics system including hardware handling experience, such as electron source, column and objective lens
• Ability to work in a clean room environment.

• To ensure that all operational duties by the team are completed on a daily schedule, ahead of time, efficiently and effectively
• To provide excellent customer service and management and to ensure that all your staff understands the importance of such standards
• Ensure smooth day-to-day operation of the team
• Obtain sales target and KPIs given by the management
• Assist in planning schedule
• Promote positive work environment
• Ensuring compliance with licensing, hygiene and health and safety legislation/guideline
• Develop strategic and operational plans for managing execution and measuring results
• Any other duties as may be assigned by management
• Able to work night shift and split shift
• Able to work OT on weekends and public holiday
• Must be able to work night shift or split shift
• Must be able to work extra hours or weekend if needed
• · Must be able to work night shift and split shift
• · Must be able to work extra hours or weekend if needed

- Lead of production; on site

- Videography

- Communicate well with editors and content strategists to relay the content - Work closely with content strategist and creative director to shoot the ideas

- On site professionalism, and respect towards clients and their properties

- In charge of equipment handed over to you

- Editing of works, simple edits

- Content planning

- Overseas trip coverage, once in a few months

• 5 days, Kallang, Manufacturing
• $4500 - $5500, AWS, performance bonus
• Medical/dental/flexible benefits

Job Description:-

• To establish step by step manufacturing processes (Lot-Traveler creation) to improve work efficiency and enhance product quality for new project
• To analyze and manage non-conforming parts on the production line, collaborating with the purchasing and QA departments to resolve the claiming process with the supplier
• Updating in-house documents, jigs, and fixtures related to Engineering Change Orders (ECOs)
• Proactively coordinating with production teams, monitoring progress and adjusting schedules as needed to meet delivery deadlines
• Providing training and guidance to production staff to ensure that they are proficient in system rack assembly techniques, quality standards, and safety procedures
• Willingness to engage in hands-on assembly tasks on the production line as required.
• Any other other tasks assigned by the supervisor

Job Requirement:-

• Degree in Engineering (Electrical/Electronic/ Manufacturing/ Mechanical), or related discipline.
• Minimum 3-5 years of related manufacturing /boxbuild and rack assembly experience will be given prior consideration
• SAP know-how and experience is preferred
• Ability to use analytical skills and a "hands-on" person
• Good interpersonal skills, proactive and work well with others
• Able to define requirement for interdisciplinary teams and identify suitable system parameters
• Team player, systematic and result oriented
• Competency in MS Office/google app sheet applications

interested applicants, please send your resume to [email protected]

Responsibilities:

• Sourcing, evaluate and purchasing of electronics components/mechanical parts from reliable supplier that can meet required specifications
• Negotiates with suppliers for better pricing, quantity, delivery terms
• Comparison of specifications and pricing and counter propose to Engineers for alternative approval
• Issue Purchase Orders based on purchase requisition
• Following up on outstanding backlog and expediting of urgent materials
• Work with Finance/Store to resolve DO/Invoice discrepancy
• Work with QC to resolve suppliers’ quality issues
• Involve with yearly audit ISO9001 & 14001

Requirement:

• Minimum Diploma in Electronics Engineering/Procurement and Supply Chain related discipline
• Minimum 2 years of purchasing experience in electronics manufacturing industry (OEM)
• Proficient in Microsoft Office (Words and Excel)
• Familiar with using Sum Product/Conditional formatting/Sort/Filter/vlookup/Pivot and formulas
• Good Communication, negotiation, problem solving and sourcing skills
• Able to work independently with minimum supervision and in a team
• Experience in machining/metal stamping parts will be added advantage

we are looking Assembly line Operator, candidate with relevant experience will be given priority in the application. Located in Toa Payoh. work from Monday - Friday & alternate saturday.

Responsibilities:·

• Solve complex system integration issues on an optical wafer/component inspection tool· Develop product specifications based on system requirement
• Involve in product development through release and will be expected to champion his/her technical solution
• Provide feedback on design changes by working closely with Development Engineering teams (M.E., E.E., and S/W Eng.) and creating ECO and documentation as needed
• Provide fix support on field escalations for analysis/resolution on any issue requiring in-depth design know-how on the product and support beta testing at customer sites
• Reviewing marketing requirements, develop system critical design specifications and design test methods

Requirements:·

• Master’s/Bachelor’s Degree in Mechanical/Mechatronics/Electrical Engineering or related fields with 3 or more years of experience in Design/System Engineering
• Ability to read technical drawings, understand BOMs, and use a variety of precision testing and measuring Instruments
• Must possess strong troubleshooting and analytical skills to support technical issues, set-up experiments, and perform data analysis
• In-depth understanding of optical, mechanical, electrical, and software components involved in the design and development of optical-based, semiconductor inspection equipment or equivalent is a plus
• Expected to travel up to 10% of the time where applicable

About the Job

As a Production Planner, you will be managing the scheduling and timeliness of vaious manufacturing processes. You will be working closely with the Manufacturing Manager and Administrator to ensure the company meets all production deadlines. Your duties include managing material and equipment availability, scheduling production and monitoring the production process for issues.

Your key responsibilities are as follows:

- Develop and execute production schedule to meet customer orders

- Plan material or sub-materials requirements according to production plan and work closely with the purchasing team to ensure sufficient supply of materials is maintain for smooth production

- Work closely with the administrator to ensure production reports are updated timely for accurate progress tracking

- Work closely with the Production Manager and Purchaser to ensure materials, manpower and machine capacity are available according to the production schedule

- Develop, implement and maintain work instructions for current and new projects

- Maintain production process records and work force training records according to requirements

- Perform tasks as assigned by manager

Your areas of knowledge and expertise that matter most for this role:

· Minimum 2 years of work experience in the manufacturing industry

· Relevant working experience in manufacturing will be an added advantage

· Strong planning and organising ability

· Meticulous with an eye for details

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

Manufacturing Engineer

We are looking for experienced full-time Manufacturing Engineer to provide technical support and advice to Manufacturing Technicians on new programs and/or ongoing program enhancements. Develop and conduct tests to enhance manufacturing processes, monitor and compile test data, perform problem solving and provide technical support to resolve technical issues.

Roles and Responsibilities:

• Build new Manufacturing Job Instruction Sheets (JIS), NC program, and Tool/Gauge plan with Siemens NX.
• Establish manufacturing procedures and proper documentation control.
• Initiate productivity improvement activities including equipment/fixture selection, design and deployment.
• Resolve technical issues relating to internal and external customers' feedback.
• Perform feasibility studies in the manufacturing capacity improvement, layout improvements and expansion.
• Initiate continuous improvement activities to existing manufacturing system and its related processes.
• Participate actively in company-wide productivity and quality programs.
• Put up justification for capital expenditure (CAPEX).

Qualification and skills:

• Diploma in an Engineering discipline with at least 2 years of relevant working experiences.
• Strong understanding and hands on with precision machining tool (CNC 5-Axis / lathe / milling etc.).
• Team player and able to work closely with other teams on cross-functional projects.
• Competent in Unigraphics and/or other CAD/CAM applications.
• Good analytical, communication and interpersonal related skills.
• Working location: East, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

About Sgcarmart

Sgcarmart is an established automotive media company in Singapore. Our site reaches 2.6M visitors monthly, making it the top-ranked local automotive website. We are on the lookout for talented individuals to join our growing team!

The Video Production Intern Role:

Are you a student pursuing a Diploma or Degree in Media Production or Digital Film? Sgcarmart is looking for a Video Production Intern to support the Stories & Branded Content team (SBC) in producing car review videos and car-related content for Singapore’s largest automotive on YouTube, with more than 400,000 views a month!

During this internship, you will have hands-on opportunities to learn and put into practice essential video production skills such as ideation, storytelling, pre-production, filming, editing, publishing, and using data analytics to track and improve performance. You will have exclusive access to the latest cars launched in Singapore, build a diverse and exciting video production portfolio, and expand your professional network in the automotive industry. You will also be given autonomy to film and edit engaging car-related content for Sgcarmart’s Tik Tok channel.

If you are passionate about filmmaking, have a strong interest in cars, and would like to be part of the 100-strong Sgcarmart team, look no further! Be part of this exciting team as the local automotive industry shifts up a gear to go green and push for electric vehicle adoption!

Requirements:

· Current Diploma or Degree student in Videography / Media Production / Film Production or relevant disciplines

· Proficiency in Adobe Premiere Pro

· Basic knowledge of Adobe Photoshop

· Basic knowledge of photography and videography terms like shutter speed, aperture, ISO, frame rate, audio levels

· Basic knowledge in operating Sony Alpha cameras for filming

· Be comfortable with shooting outdoors, reviewing and adjusting composition settings on the go (It sounds like a lot of hard work but we guarantee it will be twice the fun!)

Optional but advantageous skills and traits:

· A good sense of humor!

· Up to date with social media trends and current affairs news

· Basic understanding of audio mixing

· Some experience with using a gimbal stabiliser

· Eye for scene lighting and design

Internship Start Date:

· Immediate

Internship Duration:

· 6 Months preferred

Internship Allowance:

· $800 - $1,000

Work Location:

151 Lor Chuan, Lobby D, #04-04, New Tech Park S(556741)

Working Hours:

Mon to Fri, 10am to 7pm

Job brief

We are looking for a professional Operations Manager to coordinate and oversee our organization’s operations.

Responsibilities

• Ensuring all operations are carried on in an appropriate, cost-effective way
• Improving operational management systems, processes and best practices
• Helping the organization’s processes remain legally compliant
• Ensure all operations are carried on in an appropriate, cost-effective way
• Improve operational management systems, processes and best practices
• Purchase materials, plan inventory and oversee warehouse efficiency
• Help the organization’s processes remain legally compliant
• Formulate strategic and operational objectives
• Examine financial data and use them to improve profitability
• Manage budgets and forecasts
• Perform quality controls and monitor production KPIs

Requirements and skills

• Proven work experience as Operations Manager or similar role
• Knowledge of organizational effectiveness and operations management
• Experience budgeting and forecasting
• Familiarity with business and financial principles
• Excellent communication skills
• Leadership ability
• Outstanding organisational skills

• 3 to 6 years of experiences. Perform work in shifts to provide 24/7 on-site or on-call support
• To support linux/Java/MariaDb applications.
• Incident and Problem management
• Should have knowledge on SRE. Best practices and able to adhere to SRE guidelines in the work.
• Provide root cause analysis techniques to determine cause and resolve complex system issues.
• Perform post-resolution follow-ups to ensure problems have been adequately resolved.
• Communicate application problems and issues to key stakeholders, including management, development teams, end users, and unit leaders.
• Work with onsite and offshore teams across multiple technologies/applications
• Continuous improvement of the system, eq. removal of TOIL, job automation, performance tuning.
• Proactive management of production services by measuring and monitoring availability, latency, throughput, user journeys and overall system health.

Kindly take note of the following details for shift work

1. Allowance should be included in the monthly hiring rate.
2. Transport is claimable - before 7am (for morning shift 6am to 3pm) , after 11pm (afternoon shift 2pm to 11pm)
3. Shift Timing
   1. Morning shift 6am to 3pm
   2. General shift 9am to 6pm.
   3. Afternoon shift 2pm to 11pm
   4. Night shift 10pm to 7am.
4. Need to support including night shift, weekends and public holidays

Responsibilities:

• Performs the set-up, calibration, testing and troubleshooting of circuits, components, instruments and mechanical assemblies
• Determines and may develop test specifications, methods and procedures from blueprints, drawings and diagrams.
• Tests and troubleshoots assemblies and/or final systems. May complete rework on assemblies and/or systems as a result of testing.
• Prepares technical reports summarizing findings and recommending solutions to technical problems.
• May assist in the selection and set-up of specialized test equipment.

Requirements:

• Diploma or Bachelor Degree in Engineering.
• Ability to read technical drawings/procedures and use a variety of precision testing and measuring instruments.
• Previous hands-on experience with semiconductor equipment
• Experience with optics alignment will be adventagous
• Strong troubleshooting and analytical skills to resolve technical problems, set up experiments, and perform data analysis.
• Excellent communication, teamwork, and people skills are required.
• Comfortable working in shifts and cleanroom environment

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

Responsibilities:

• Monitoring applications and infrastructure alerts.
• Recommending and implementing solutions to mitigate potential production issues.
• Taking ownership, responding to incident tickets, and closing open incident tickets by adhering to service level agreements.

Requirements:

• Minimum 1 year of experience in an application support role.
• Proficiency in Unix commands, Shell scripting, and SQL queries.
• Knowledge of Job scheduling, Kafka, and ActiveMQ is a plus.
• Exposure to the banking industry is advantageous.
• Dynamic individual with a thirst for learning.
• Strong team player with excellent interpersonal skills.
• Ownership-oriented with the ability to meet SLAs without compromising on work quality.

Junior/Freshers also welcome to apply.

Responsibilities:

• Material planning base on production requirement
• Plan and manage inventory at optimal level
• Monitor production schedule to meet on-time delivery
• Work with testing team and arrange production staff to work according to production schedule

Requirements:

• Minimum Diploma in Manufacturing/Production/Electronics Engineering
• Minimum 1 year in electronics manufacturing industry
• Able to communicate and work closely with internal customers, purchasing team and sub-contractors
• Material planning for production requirement
• Experience with ERP and MRP
• With minimum supervisory skill

Job Description:

• Basic Salary + Allowance
• 5 Days Work Week
• Working location: Serangoon North

Responsibilities:

• Perform product assembly tasks such as cable and high-power units (training provided)
• Perform air leak test for units
• Perform Production Maintenance

Requirements:

• Minimum Primary Six
• Require to use microscope
• Soldering skill (training provided)
• Testing skill (training provided)
• Some work experience in manufacturing environment
• Able to carry up to 50kg heavy load (with assistance)

5 days work week

Responsibilities:

• Handle the operations of production
• Plan production daily activities and raw materials/inventory requirements
• Prepare production and ensure goods are sealed and kept frozen
• Maintain work safety
• Assist in sales, cashier,
• Explaining to customers about the ingredient if shop is busy
• Assist Manager in any other tasks as assigned

Requirements:

• N level
• Basic english
• Experience in food manufacturing industry is an added advantage

Efficient Employment Pte Ltd

Reg No: R23114808

EA license: 23C1583

Job Purpose: Test program development and implementation for new products.

Key Responsibilities:

• ATE test program development and implementation for new products (Production and Characterization Test)
• Test Hardware (final test loadboard and wafersort probecard) design and development for engineering activities and production ramp-up
• Perform characterization testing, prepare test specifications, define tests, conditions, criteria, etc.
• Solid digital and mixed-signal programming experience on ATE using C++/VB language and scripting
• Automate test process by writing software scripts to improve work efficiency.
• Monitor and manage production test yields, maverick lots, engineering lots
• Hands-on test debugging, RMA analysis and improving test solutions (Hardware and Software)
• Work with product designer and DFT engineer to ensure smooth product bring-up
• Responsible for overseeing product reliability stresses and test results
• Establish cost-effective production test solutions.

Additional Responsibilities:

a) Any reasonable task assigned by management and deemed to be within the individuals’ capabilities to ensure smooth running of the business.

b) As this is an evolving business, ongoing change is an integral part of the position. Management will liaise with the individual on any fundamental change to work practices. The individual is required to embrace and adopt any change to working practices.

Knowledge and skill requirements:

• Bachelor's degree in engineering (electrical/electronics)
• Minimum 5 years of relevant working experience in semiconductor industry
• Knowledge and hands on experience with industry standard Automated Test Equipment – Teradyne J750.
• Experience on Advantest T2K, Advantest 93K, UltraFlex, Chroma is a plus.
• Strong understanding of ATE Test Programming principles, preferablywith experience in Digital and Mixed signal testing
• Test Software development experience & skills, including knowledge of C/C++, VB, PERL, Python etc.
• Experience/knowledge in new product characterization and qualification.
• Experience in test Hardware development (loadboard and probecard)
• Good knowledge on manufacturing process (fab, packaging,test)
• Good aptitude in statistical data analysis, problem solving and solution finding.

Working Conditions:

- Working conditions are normal for an office environment.

- Work requires willingness to work a flexible schedule.

Job Purpose: Test program development and implementation for new products.

Key Responsibilities:

• ATE test program development and implementation for new products (Production and Characterization Test)
• Test Hardware (final test loadboard and wafersort probecard) design and development for engineering activities and production ramp-up
• Perform characterization testing, prepare test specifications, define tests, conditions, criteria, etc.
• Solid digital and mixed-signal programming experience on ATE using C++/VB language and scripting
• Automate test process by writing software scripts to improve work efficiency.
• Monitor and manage production test yields, maverick lots, engineering lots
• Hands-on test debugging, RMA analysis and improving test solutions (Hardware and Software)
• Work with product designer and DFT engineer to ensure smooth product bring-up
• Responsible for overseeing product reliability stresses and test results
• Establish cost-effective production test solutions.

Additional Responsibilities:

a) Any reasonable task assigned by management and deemed to be within the individuals’ capabilities to ensure smooth running of the business.

b) As this is an evolving business, ongoing change is an integral part of the position. Management will liaise with the individual on any fundamental change to work practices. The individual is required to embrace and adopt any change to working practices.

Knowledge and skill requirements:

• Bachelor's degree in engineering (electrical/electronics)
• Minimum 5 years of relevant working experience in semiconductor industry
• Knowledge and hands on experience with industry standard Automated Test Equipment – Teradyne J750.
• Experience on Advantest T2K, Advantest 93K, UltraFlex, Chroma is a plus.
• Strong understanding of ATE Test Programming principles, preferablywith experience in Digital and Mixed signal testing
• Test Software development experience & skills, including knowledge of C/C++, VB, PERL, Python etc.
• Experience/knowledge in new product characterization and qualification.
• Experience in test Hardware development (loadboard and probecard)
• Good knowledge on manufacturing process (fab, packaging,test)
• Good aptitude in statistical data analysis, problem solving and solution finding.

Working Conditions:

- Working conditions are normal for an office environment.

- Work requires willingness to work a flexible schedule.

• To ensure that all operational duties by the team are completed on a daily schedule, ahead of time, efficiently and effectively
• To provide excellent customer service and management and to ensure that all your staff understands the importance of such standards
• Ensure smooth day-to-day operation of the team
• Obtain sales target and KPIs given by the management
• Assist in planning schedule
• Promote positive work environment
• Ensuring compliance with licensing, hygiene and health and safety legislation/guideline
• Develop strategic and operational plans for managing execution and measuring results
• Any other duties as may be assigned by management
• Able to work night shift and split shift
• Able to work OT on weekends and public holiday
• Must be able to work night shift or split shift
• Must be able to work extra hours or weekend if needed
• · Must be able to work night shift and split shift
• · Must be able to work extra hours or weekend if needed

Responsibilities:

• Plans for production which includes releasing of work orders and ensuring on-time delivery of shipments based on customer requirements
• Works closely with purchasing and warehouse/logistics groups to ensure on-time receipt, delivery of materials and finished goods shipments
• Monitors and co-ordinates on material shortages, expediting and ensuring material availability to support production plan
• Manages spares planning support and ensure timely delivery of spares to distribution centre
• Drives spares repair material planning and optimize the materials needed to support the spares replenishment program
• Drives and minimize excess and obsolescence inventory
• Assists in developing, maintaining and improving existing processes, procedures and key performance metrics

Requirements:

• Bachelor Degree / Diploma or equivalent in Technical Engineering / Business / Supply Chain
• Minimum 2 years of related industry experience in manufacturing and production planningKnowledge of work order management and understanding of Bill of Material
  Proficient in an ERP system, preferably SAP system (PP module) with good knowledge of supply chain, materials flow concepts and production planning reporting/metrics
  Experience in low volume high mix (preferably equipment manufacturing) and DFT/pull manufacturing environment is a plus
• Strong written and verbal communication skills
• Team player, self-driven and able to work under pressure with a sense of urgency
• Ability to adapt to a fast-paced work environment and to work with a variety of offshore locations

About Sgcarmart

Sgcarmart is an established automotive media company in Singapore. Our site reaches 2.6M visitors monthly, making it the top-ranked local automotive website. We are on the lookout for talented individuals to join our growing team!

The Video Production Intern Role:

Are you a student pursuing a Diploma or Degree in Media Production or Digital Film? Sgcarmart is looking for a Video Production Intern to support the Stories & Branded Content team (SBC) in producing car review videos and car-related content for Singapore’s largest automotive on YouTube, with more than 400,000 views a month!

During this internship, you will have hands-on opportunities to learn and put into practice essential video production skills such as ideation, storytelling, pre-production, filming, editing, publishing, and using data analytics to track and improve performance. You will have exclusive access to the latest cars launched in Singapore, build a diverse and exciting video production portfolio, and expand your professional network in the automotive industry. You will also be given autonomy to film and edit engaging car-related content for Sgcarmart’s Tik Tok channel.

If you are passionate about filmmaking, have a strong interest in cars, and would like to be part of the 100-strong Sgcarmart team, look no further! Be part of this exciting team as the local automotive industry shifts up a gear to go green and push for electric vehicle adoption!

Requirements:

· Current Diploma or Degree student in Videography / Media Production / Film Production or relevant disciplines

· Proficiency in Adobe Premiere Pro

· Basic knowledge of Adobe Photoshop

· Basic knowledge of photography and videography terms like shutter speed, aperture, ISO, frame rate, audio levels

· Basic knowledge in operating Sony Alpha cameras for filming

· Be comfortable with shooting outdoors, reviewing and adjusting composition settings on the go (It sounds like a lot of hard work but we guarantee it will be twice the fun!)

Optional but advantageous skills and traits:

· A good sense of humor!

· Up to date with social media trends and current affairs news

· Basic understanding of audio mixing

· Some experience with using a gimbal stabiliser

· Eye for scene lighting and design

Internship Start Date:

· Immediate

Internship Duration:

· 6 Months preferred

Internship Allowance:

· $800 - $1,000

Work Location:

151 Lor Chuan, Lobby D, #04-04, New Tech Park S(556741)

Working Hours:

Mon to Fri, 10am to 7pm

Job Description

• Provide 7 x 24 operational support for all production practices including weekends for applications
• Provide technical expertise to facilitate investigation of complex technical issues, with eye for details
• Uses technical knowledge to provide solutions to complex issues in a timely and efficient manner.
• Possess good domain knowledge on banking channels
• Possesses strong understanding of technical and subject matter expertise that can be leveraged to identify and escalate issues in a timely fashion.

Requirements:

• Experience Shell Scripting preferred. Other experience programming languages such as JAVA/J2EE, PL/SQL added advantage not mandatory
• Familiar with operating system such as Linux / Solaris / AIX / Windows
• Strong technical knowledge of Linux, AIX, JBOSS, MariaDB, KAFKA, Active MQ, SQL, Shell scripting and TWS Job scheduling
• Able to provide 24x7 operational support including Weekends and public holidays
• Very clear communication skills both written and oral
• Able to drive/recommend solutions to extended technology teams.
• Self-starter with excellent crisis management skills.
• Able to handle incidents and corrective actions follow-ups.

If you are keen, please apply direclty or alternatively reach out me on [email protected]

Contact: +65 90053495