Production Planning and Execution:

• Overseeing the entire production process from start to finish.
• Developing and implementing production schedules and timelines.
• Ensuring the availability of necessary resources (materials, equipment, personnel).
• Monitoring production progress and identifying potential bottlenecks or delays.
• Implementing quality control measures to ensure products meet specifications.

Cost Control and Efficiency:

• Monitoring production costs and identifying opportunities for cost reduction.
• Optimizing production processes to improve efficiency and minimize waste.
• Exploring and implementing new technologies or methods to enhance productivity.
  

Industry Best Practices:

• Staying abreast of industry trends, best practices, and technological advancements in construction and design.
• Adhering to relevant safety regulations and quality standards.
  

Collaboration and Communication:

• Collaborating with other departments (e.g., design, procurement, sales) to ensure smooth project execution.
• Communicating effectively with stakeholders (e.g., clients, suppliers) regarding production progress and any potential issues.
  

Continuous Improvement:

• Identifying areas for improvement in production processes and implementing necessary changes.
• Providing recommendations to management on how to enhance production efficiency and quality.
  

Job Description

· Cutting and Crimping of wires

· Inserting of connectors and housing

· Assemble components to form wire harness according to customer’s specifications

· Ensuring quality in process is observed

· Re-work defective wire assemblies

· Any other duties assigned from time to time

Requirements

· Good eyesight as some components are small

· Not color blindness for identify colored cable and label

· Understand basic English to read drawing and cutting lengt

Primary

1. To Provide primarily support at production department.
2. Assist superiors in prepare and compile reports.
3. Prepare, generate and release job order / purchase requisition to various departments of the confirmed job orders.
4. Responsible for planning of production output, monitor machine capacity, OEE etc.
5. Work closely among inter-departments to ensure committed schedules are met.
6. Provide regular update to the sales/Projects team on project development in a timely manner.
7. Maintenance and upkeep records of Production/Engineering/Technical documents.
8. Arrange production run according to Supervisor/HOD instruction.
9. Receiving/distribution of raw material for production usage.
10. Parts distribution to other departments for next process.
11. Able to systemize and improve on workflow.
12. Good application and know-know on the ERP / reporting tools.
13. Ability to understand or interpret all technical drawing and part specification.

Education level:

1. Min. NTC/Nitec level ME/Mechatronic or its relevant.

Experience level:

1. Two (2) years in relevant experience in clerical environment or manufacturing or its relevant

2. Perform competent in clerical duties, computer literacy.

3. Result oriented, resourceful and independent.

4. Ability to read, understand mechanical drawing and Geometric Dimensioning and Tolerance.

Job Description & Requirements

1. Formulate and provide directives for Production Department in meeting organization's goals and committed to Quality Management System.
2. Accountable with the assigned factory sections in terms of production, New Model Development, Customer Service and Support, Supplier and Materials Management, Logistics and Transportation.
3. Analyze section profit/loss of projects and providing cost control and cost effectiveness strategy.
4. Provide production & material planning in ensuring production efficiency and on time delivery.
5. Ensure effective control of machine up/down time and well scheduled and optimized planning in machine / work-center load.
6. Manpower balancing and deplaoyment strategy with manpower skill set.
7. Continuous improvement program to ensure productivity, cost and quality effectiveness, general housekeeping and safety.
8. Formulate, identify and conduct management / training workshop to initiate / facilitate staff in aligning organizations missions and objectives and actions plans.
9. Support other function activities within the company to achieve the overall business goals and objectives.
10. Implement process improvement.
11. Authorize the appropriate use of performance monitoring and statistical techniques.
12. Ensure and coordinate the implementation of risk assessment and risk contol of medical devices.

Requirements:

• Preferred to have Diploma / Degree in Mechanical / Precision Engineering or equivalent.
• Minimum 6 years in a Manufacturing environment (preferably in Precision Engrg / Sheet metal industry) and with at least 4 years of supervisory capacity.
• Exposure with involvement in newly factory, product / process set-up is much preferred.
• In-depth understanding of manufacturing cycle and good budgeting control.
• Strong leadership with good analytical and problem solving skill, as well as dynamic in planning and result oriented.

Job Description:

• Review and Study customer's specifications and drawings
• Set up machines and create samples
• Update sample making records
• Assist in new product development
• Create and maintain jigs and fixtures
• Assembly of wire harness and Electromechanical parts
• Any other duties assigned from time to time

Requirements:

• Good eyesight as some components are small
• Not color blindness for identify colored cable and label
• Understand basic English to read drawing and cutting length

Job Types: Full-time, Permanent

Schedule: Monday to Friday

Authorities and Responsibilities

1. To organize, co-ordinate, check and ensure all production activities follow as plan.
2. Calculate machine cycle time and organize production schedule base on machine capacity and capabilities
3. Plan manpower resources and delegate machining job to machinist
4. Verify program issue to workshop
5. Analyze and provide solution to solve problems between programmer and production dept.
6. Analyze monthly machining and scrap report
7. Good supervisory skill, people skill and 5 ‘S’ housekeeping
8. Good writing and communicating skill
9. Good in mechanical process, such as machining process, H/T, jig and fixture etc.

Competence Requirements

• Preferred NTC 2 / Diploma in Engineering discipline or equivalent.
• Minimum 3 years of working in related industry, and having 2 – 3 years of supervisory experience and preferably with working knowledge in machining processes.
• PC literate
• Possess excellent interpersonal communication skills and is an effective team player who is also self driven with a strong achievement orientation.

Job Responsibilities:

• To manufacture production units to meet performance objectives with minimum supervision
• To perform simple maintenance and calibration of test means or equipment whenever necessary with the support of Test Engineering dept.
• Manage the WIP level
• Accurate reporting of any anomalies encountered during production process. Detect and alert in case of default or results deviations (even if still within the good range)
• To involve in 5S and Kaizen initiatives
• To support administrative works (Raise PR, Document Archiving Process) and production task as per assigned by team lead/supervisor

Job Requirements:

• NITEC/Diploma in Electronics Engineering
• Ability to understand and follow manufacturing/technical instructions
• Ability to operate complex test tools
• Ability to read or interpret test results

Other Information:

• Working Hours: 5 Days, Shift work may be expected
• Working Location: Changi

Freelance Opportunity: Packing Manufacturing Production Process Staff (Hand Packer)

Are you seeking a flexible freelance role in a supportive work environment? Inkjet Systems Pte Ltd is looking for dedicated individuals to join our manufacturing team as Freelance Hand Packers.

Job Title: Freelance Packing Manufacturing Production Process Staff
Occupation: Hand Packer

Why Join Us?

• MOM-Compliant Standards: Work in a safe and regulated workplace.
• Comfortable Work Environment: Our facility is cool, airy, spacious, well-lit, and well-ventilated, ensuring you have the best setting to work productively.
• Work-Life Balance: Enjoy a five-day work week for flexibility and convenience.

Requirements:

• Reside within a 30-minute bus ride from our facility at:
  56 Loyang Way, Singapore 508775.
• Punctuality, reliability, and attention to detail are essential.

What You’ll Do:

• Assist in packing, sorting, and managing products in our manufacturing process.
• Ensure all packed items meet quality and presentation standards.
• Collaborate with the team to meet production deadlines.

How to Apply:
Ready to be part of a team that values productivity and comfort? Send your application to [email protected] and [email protected], or connect with us at ecosam.sg.

Join Inkjet Systems Pte Ltd and contribute to our innovative production processes while enjoying a flexible freelance role!

• Plan, execute, and monitor marketing campaigns across various platforms (e.g., digital, social media, traditional).
• Manage campaign budgets, schedules, and resources efficiently.
• Track and analyze campaign performance, adjusting strategies as needed for optimization.

Skills and Competencies:

1. Strategic Thinking:Ability to think critically and develop effective strategies to meet company objectives.
   
2. Digital Marketing Expertise:Proficient in digital marketing tools and techniques, including SEO, SEM, Google Analytics, email marketing, and social media management.
   
3. Data Analysis and Interpretation:Strong analytical skills with the ability to interpret data and adjust strategies accordingly.
   
4. Creativity:Ability to develop creative campaigns and solutions that resonate with target audiences.
   
5. Leadership and Team Management:Proven ability to lead and motivate a team while collaborating across departments.
   
6. Communication Skills:Excellent verbal and written communication skills for internal and external audiences.
   
7. Project Management:Strong organizational skills with the ability to handle multiple projects and deadlines simultaneously.
   
8. Customer Focus:Ability to understand customer needs and deliver effective marketing solutions.
   

Job Description:

· Planning and release of work orders for all parts (both components and DMM) based on the customer order/ demand forecast and triggers the subsequent needed materials for piece-parts and sub-assemblies.

· Assure each operation meets shipping dates according to sales forecasts or customer orders for both DMM and components.

· Planning and scheduling workflow for each department and operation according to established manufacturing sequences and lead times.

· Update the status of assigned projects, expedites operations that delay schedules and alters schedules to meet unforeseen conditions.

· Prepare production reports.

· Monitors, analyzes and report performance to schedule of production and production support activities, utilizing information derived from material and production control systems.

· Monitor and expedite the components progress of sub-assembly to meet the delivery schedule and initiate the picking/ staging for assembly.

· Expedite all the subsequent process of material once delivered from the sub-tier to meet the delivery schedule.

· Ensure all parties are fully cognizant of production status, & that work planning and execution objectives are integrated and communicated.

· Coordinates and expedites the placement of purchase orders and / or delivery of material if necessary.

· Resolves problems utilizing acquired knowledge and analytical abilities.

Requirements:

· Min 5 years experience in Manufacturing/Automation/Contract Manufacturing

· Proficient in MS Office, SAP or Epicor

· Able to work independently under pressure and meet tight deadlines

· Good interpersonal skills and require good organizational skills such as clear agenda setting, preparation and planning for meetings and tasks, involves input to the planning exercises and reporting against those plans.

· Able to commence work in short notice

· Bilingual in English and Mandarin

Job Description:

• Review and Study customer's specifications and drawings
• Set up machines and create samples
• Update sample making records
• Assist in new product development
• Create and maintain jigs and fixtures
• Assembly of wire harness and Electromechanical parts
• Any other duties assigned from time to time

Requirements:

• Good eyesight as some components are small
• Not color blindness for identify colored cable and label·
• Understand basic English to read drawing and cutting length

Job Types: Full-time, Permanent

Schedule: Monday to Friday

Location: 4 Loyang Lane, Singapore 508914

Key Roles and Responsibilities

• Overall in charge of HR Function with full spectrum of services including recruitment and talent management/retention, succession planning, workforce planning and scheduling, training and development, salary and benefits administration and total reward function, support overseas subsidiary setup, build dedication and commitment, discuss issues and conflicts, recognition and incentives system, policy and compliance etc.
• Serve as a HR Business Partner and work closely with HOD to understand business objectives, and whenever deemed necessary, implement jointly with function leader the appropriate HR solutions/framework.
• An active member of the leadership team to lend HR perspective and advice to discussions.
• Work on annual manpower planning and budgeting.
• Provide support to the Senior Management team with organizational changes such as communication of changes, managing ground sentiments, employee talent engagement.
• Drive and lead HR projects such as Annual Performance Appraisal Exercise, bonus pay-out exercise, external audits that involve HR functions and etc.
• Nurture the HR team members through developing and upping their job competencies, with a view to mentoring them to be independent and competent employees.
• Formulates, implements, and reviews HR policies and regulations to meet business objectives, and ensure their relevance in the face of any changing business directives or legislations and statutory requirements.
• Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies.
• Develop the Learning and Development framework
• Negotiation of Collective Agreement with the Union
• DPO (Data Protection Officer) for the organization.
• Perform other tasks as assigned by the supervisor.

Requirements

• Diploma/Degree ideally in Human Resources Management or equivalent.
• Minimum 8 to 10 years’ experience, with at least 2 to 3 years in a managerial role
• An Independent self-starter to lead, act and execute company directives
• Proficient in Singapore Employment Act
• Familiarity with Policy formulation and implementation
• Analytical and Critical thinking skills
• Problem-solving and decision-making skills
• Proficient in Microsoft Office
• Good listening and communication skills (verbal/written)
• Relation-building skills
• Union management skills

Join the Inkjet Systems Pte Ltd Family!

Are you looking for a stable, rewarding career with a company that values its employees? Inkjet Systems Pte Ltd is the place for you!

Why Work With Us?

At Inkjet Systems Pte Ltd, we believe in rewarding hard work with progressive wages and providing a safe, supportive work environment.

What We Offer:

• Full-Time Employment: Enjoy the security of CPF contributions and paid insurance.
• Compliance Assured: MOM-compliant workplace standards.
• Comfortable Work Environment: Work in a cool, airy, spacious, well-lit, and well-ventilated setting designed for productivity and comfort.
• Work-Life Balance: A five-day work week, so you have time for what matters most.

What We’re Looking For:
We’re seeking motivated team players who meet the following requirements:

• Reside within a 30-minute bus ride from our facility at 56 Loyang Way, Singapore 508775.
• Committed to punctuality, responsibility, and teamwork.

Your Next Step:
Become part of our innovative and forward-thinking team!

Apply Now:
Submit your resume to [email protected] or visit us at ecosam.sg to learn more.

Take the next step in your career with Inkjet Systems Pte Ltd—where your growth is our priority!

Job Description

· Cutting and Crimping of wires;

· Inserting of connectors and housing;

· Assemble components to form wire harness according to customer’s specifications;

· Ensuring quality in process is observed;

· Re-work defective wire assemblies;

· Any other duties assigned from time to time.

Requirements

· Good eyesight as some components are small;

· Not color blindness for identify colored cable and label.

· Understand basic English to read drawing and cutting length

Job Description & Requirements:

• Develop detailed manufacturing processes, including assembly procedures, testing protocols, and quality control checks.
• Create efficient process flows to minimize waste and maximize productivity.
• Continuously analyse and improve existing processes to reduce costs, increase yield, and enhance quality.
• Design and procure necessary manufacturing equipment and tooling.
• Determine the required production capacity and allocate resources accordingly.
• Plan and design the manufacturing facility layout for optimal workflow and efficiency.
• Oversee pilot production runs to identify and address potential issues.
• Validate processes to ensure they meet product specifications and quality standards.
• Implement quality control measures to ensure product consistency.
• Drive continuous improvement initiatives to enhance product quality and process efficiency.
• Investigate and resolve quality issues.

Requirements:

• Degree / Diploma in Mechanical/Electrical/Mechatronics
• 1-4 years of relevant experience preferably in Assembly of Equipment or Test area preferably in Semiconductor Industry
• Experience in maintaining the Quality of Work
• Knowledge of Material BOM’s
• Capable of understanding Engineering drawings for Mechatronics-assembly
• Experienced in Manufacturing Engineering Tools (5S, Process Flow, FMEA, System Risk Analysis, DMAIC, 8D, Control Plan, SOP, SOO, Work Instructions, Root Cause Analysis, Capacity versus Demand)
• Experience in Mechanical Fitting, Cable Routing and Installation of Equipment. Preferably in a Semiconductor Equipment Industry.
• Able to use Solid works to design simple fixtures / jigs
• Technical skills must include basic knowledge of mechanical/Electrical/Mechatronics
• Ability to work independently with minimal supervision

Job Description & Requirements

1. Formulate and provide directives for Production Department in meeting organization's goals and committed to Quality Management System.
2. Accountable with the assigned factory sections in terms of production, New Model Development, Customer Service and Support, Supplier and Materials Management, Logistics and Transportation.
3. Analyze section profit/loss of projects and providing cost control and cost effectiveness strategy.
4. Provide production & material planning in ensuring production efficiency and on time delivery.
5. Ensure effective control of machine up/down time and well scheduled and optimized planning in machine / work-center load.
6. Manpower balancing and deplaoyment strategy with manpower skill set.
7. Continuous improvement program to ensure productivity, cost and quality effectiveness, general housekeeping and safety.
8. Formulate, identify and conduct management / training workshop to initiate / facilitate staff in aligning organizations missions and objectives and actions plans.
9. Support other function activities within the company to achieve the overall business goals and objectives.
10. Implement process improvement.
11. Authorize the appropriate use of performance monitoring and statistical techniques.
12. Ensure and coordinate the implementation of risk assessment and risk contol of medical devices.

Requirements:

• Preferred to have Diploma / Degree in Mechanical / Precision Engineering or equivalent.
• Minimum 6 years in a Manufacturing environment (preferably in Precision Engrg / Sheet metal industry) and with at least 4 years of supervisory capacity.
• Exposure with involvement in newly factory, product / process set-up is much preferred.
• In-depth understanding of manufacturing cycle and good budgeting control.
• Strong leadership with good analytical and problem solving skill, as well as dynamic in planning and result oriented.

Primary

1. To Provide primarily support at production department.
2. Assist superiors in prepare and compile reports.
3. Prepare, generate and release job order / purchase requisition to various departments of the confirmed job orders.
4. Responsible for planning of production output, monitor machine capacity, OEE etc.
5. Work closely among inter-departments to ensure committed schedules are met.
6. Provide regular update to the sales/Projects team on project development in a timely manner.
7. Maintenance and upkeep records of Production/Engineering/Technical documents.
8. Arrange production run according to Supervisor/HOD instruction.
9. Receiving/distribution of raw material for production usage.
10. Parts distribution to other departments for next process.
11. Able to systemize and improve on workflow.
12. Good application and know-know on the ERP / reporting tools.
13. Ability to understand or interpret all technical drawing and part specification.

Education level:

1. Min. NTC/Nitec level ME/Mechatronic or its relevant.

Experience level:

1. Two (2) years in relevant experience in clerical environment or manufacturing or its relevant

2. Perform competent in clerical duties, computer literacy.

3. Result oriented, resourceful and independent.

4. Ability to read, understand mechanical drawing and Geometric Dimensioning and Tolerance.

Make a meaningful difference to patients around the world. At Edwards Lifesciences facilities around the world, our Manufacturing teams create the tools, technologies, and devices that transform patients’ lives. As part of our sewing, assembly, delivery, and distribution teams, your attention to detail and commitment to continuous improvement will help us turn innovative ideas into reality. Your purpose-driven work will help leave lasting and positive impacts on patient lives.

Key Responsibilities:

• Supervise employees and manufacturing activities pertaining to the production of products and/or manufacturing processes in - and with manufacturing/technical knowledge of - 1 or more production areas, depending on the complexity of the areas
• Conduct performance reviews, including resolving performance issues
• Oversee the scheduling of work orders and team performance metrics
• Accountable to ensure staff is appropriately trained to perform assigned work
• Accountable for productivity, quality, and training metrics of staff, and provide regular progress reports and manufacturing metrics to management and cross-functional stakeholders
• Ensure appropriate staffing for all positions
• May participate in improvement projects, partner with engineering on investigations and/or corrective actions, perform non-conformance investigations for review with engineering, assures documentation content is valid
• Other incidental duties

Education and Experience:

• Other: in Diploma, 5 years relevant experience
• with internship or substantial technical knowledge and experience in related manufacturing, and/or quality
• Experience working in multi-cultural teams with cultural sensitivity
• Experience working in a medical device industry Required

Additional Skills:

• Proven expertise in Microsoft Office Suite with working knowledge of Enterprise Resource Planning (ERP) system, preferably JDE
• Excellent communication and interpersonal relationship skills; possessing strong collaboration skills in partnering with cross functional stakeholders in order to achieve objectives
• Full understanding of manufacturing procedures
• Ability to supervise/lead employees in a manufacturing environment
• Ability to analyze and identify potential line/operation layouts adjustments to improve efficiency
• Basic understanding of processes and equipment used in assigned work
• Ability to work and excel within a fast paced, dynamic, and constantly changing work environment
• Ability to lead teams, provide coaching and feedback, including responsibility for all employee actions including hire/fire authority and partnering with HR on all aspects of employee relations
• Knowledge of Lean Manufacturing concepts and Six Sigma
• Must be able to promote and work in an inter-departmental team environment
• Successful completion of ongoing job training of manufacturing process steps
• Adhere to all company rules and requirements (e.g., pandemic protocols, Environmental Health & Safety rules) and take adequate control measures in preventing injuries to themselves and others as well as to the protection of environment and prevention of pollution under their span of influence/control
• Able to work Monday to Friday, 3.30pm to 12am. 2-ways transport will be provided.

· Create quality inspection plans and work instructions for incoming, In-process or outgoing parts to ensure that components and products conform to specifications.

· Define training plan, train QC supervisors, QC technicians and QC inspectors to perform dimensional/functional inspection in accordance to work instructions.

· Perform First Article Inspection for newly inducted materials and parts.

· Perform qualification validation of equipment, processes and test methods

· Ensure the compliance of equipment and tools use during inspection in accordance to Calibration and Preventive Maintenance requirements.

· Participate in Process Failure Mode Effect and Analysis team to mitigate product risk arising from manufacturing

· Perform complaint handling, investigate root cause of complaint and perform Corrective Action and Preventive Action as necessary.

· Handle non-conformances and perform disposition of rejected parts, trend yield and rejects, investigate root cause of non-conformance and perform Corrective Action and Preventive Action as necessary.

· Maintain the manufacturing environment and perform gowning as necessary when working in controlled manufacturing environment e.g. clean room.

· Initiate and/or execute engineering changes in compliance with Engineering Change Control procedures

· Participate in external and internal audit to ensure company quality system is effective

· Participate in continuous improvement programs such as 6S program, yield improvement projects etc.

· Support new production introduction as a team member representing quality

· Perform other tasks as assigned by the supervisor

· Work experience as a quality engineer in a medical device manufacturing environment

(Candidates with Diploma in Engineering. Science or equivalent can be considered for Assistant Quality Engineer position. Candidates with more experience can be considered for Senior Quality Engineer position)

· Experience with qualification validation of equipment, processes and test methods for new product introduction

Job responsibilities:

• Support all production related activities.
• Ensure compliance of clean-room and GMP protocols.
• Ensure shipment, output and quality of products are met.
• Follow work instructions and compliance of good documentation practice.
• Follow instruction and work allocation from supervisor.
• As and when assigned by supervisor

Job requirements:

• Minimum secondary education
• Minimum 1 year relevant of working experience.
• Able to communicate simple English.
• Must be able to work night shift
• Able to put in Overtime hours on weekdays/Saturday, if required.
• Willing to work in Loyang

Working hours: Monday to Friday

Daily break of 45 Minutes

Day shift : 7.15 am – 4.48 pm

Night Shift: 7.00pm - 4.48am

To refer to immediate supervisor for weekly / monthly work schedule that spells out the required working days in each week / month.

Duties and Responsibilities

Quality management and control

• Overall in charge of the entire packaging workshop, inclusive of data coding and laser printing and cellophane wrapping of final products.

• Manage the entire packing process, planning production schedule and communicate with cross-functional teams and departments to meet the delivery deadline

• Responsible for sampling and sample retention, inspection of incoming materials, approval of bulk, semi-finished products, finished products and packaging materials

• Maintain written and signed records of all audits and inspections as required and ensure the records are up-to-date and evaluated

• Review SOPs, protocols/batch records, reports, quality records (e.g. deviations, change controls, or CAPA) and ensure all the relevant testing are conducted and records are timely reviewed

• Implement and maintain quality procedures in compliance with regulations and internal policies, develop the quality procedures and reporting to management as required

• Participate in internal facilities inspection to evaluate and improvement of site quality system

• Responsible for maintenance of the factory premises, production equipment, and to ensure appropriate validations are timely performed and documented

• Ensure proper initial and regular training of operation personnel is being conducted and assist consultant for relevant training and awareness of basic regulatory.

• Investigate non-conformance and perform root cause analysis to deliver effective solutions via the corrective action and preventive action reporting process

• Responsible for compliance of workplace safety and assist to consultant relating to HSA and medical-licensing-related matters and to setup the operation system

Warehouse management and inventory control

• Oversee the warehousing and logistic operation, storage segregation, inventory accuracy and stock replenishment, planning quarterly & annually cycle count

• Ensure the implementation of standard procedures in warehouse and documentation

Ensure the warehouse facilities and equipment are well maintained

Knowledge/Skill Requirements:

• Excellent analytical skills with the ability to analyze data and identify trends.

• Strong communication skills, effective with team members and stakeholders at all levels.

• Attention to detail and ability to identify and resolve issues quickly and effectively.

• Strong problem-solving skills with the ability to think creatively and develop innovative solutions.

• Excellent organizational skills, capable of managing multiple tasks and priorities simultaneously.

• Extensive knowledge of quality control processes, procedures, and policies.

• Proficiency in Microsoft Office Suite and other relevant software applications.

• 8 - 10 years of experience in Quality Control within the steel industry or a manufacturing environment.

• Graduate degree or higher in pharmaceutical, chemical manufacturing or relevant field.

Expected High Performance Behaviors:

• Exhibit a positive attitude regarding work and responsibilities.

• Ability to work collaboratively within a team.

• Maintain effectiveness during significant changes in work tasks or environment, adjusting effectively to new work structures, processes, requirements, or cultures.

• Consistently seeking to enhance efficiency and improve quality standards.

Job summary

1) In charge of planning production and quarterly machine maintenance schedule.

2) Work with production supervisor to ensure the cleanliness and tidiness of production floor.

3) Liaise with sales to check and update production schedule and advise ETA of finished products.

4) Based on the production plan, assign production operator to relevant machine and its target quantity.

5) Prepare work order to warehouse assistant and mixer to prepare the raw material according to the plan.

6) Update completed work order quantity into the system when applicable.

7) Generate reports for management review (productivity report, wastage report etc).

8) Ensure sufficient stock for finished product and no out of stock issue.

9) Liaise with raw materials vendor to achieve JIT production.

10) Manage raw material inventory.

11) Liaise with Freshening overseas counterpart for ordering of finished products.

12) Liaise with production supervisor and technician to ensure machine spare parts are available.

13) In charge of ordering machine parts from supplier.

14) Supervise and manage production team (training, leave approval, personal issues).

15) Assist in ISO audits and preparation.

16) Any other area of responsibilities that the company deems necessary.

Competency requirements

1) Minimum Diploma level.

2) Microsoft Dynamics 365 Business Central proficiency will be an added advantage.

3) Communication skills.

4) Fluent in mandarin to communicate with operators.

5) At least 1 year of relevant experience.

6) Able to understand basic fundamentals of machine operations and production workflow.

7) Able to adapt to changes quickly and give clear instructions to production team.

Working Hours
Monday - Friday : 8 30am - 5 45pm (1 Hour Break)
Saturday: 8 30am - 2 30pm (1 Saturday Shift Every 4 Weeks)

Primary

1. To Provide primarily support at production department.
2. Assist superiors in prepare and compile reports.
3. Prepare, generate and release job order / purchase requisition to various departments of the confirmed job orders.
4. Responsible for planning of production output, monitor machine capacity, OEE etc.
5. Work closely among inter-departments to ensure committed schedules are met.
6. Provide regular update to the sales/Projects team on project development in a timely manner.
7. Maintenance and upkeep records of Production/Engineering/Technical documents.
8. Arrange production run according to Supervisor/HOD instruction.
9. Receiving/distribution of raw material for production usage.
10. Parts distribution to other departments for next process.
11. Able to systemize and improve on workflow.
12. Good application and know-know on the ERP / reporting tools.
13. Ability to understand or interpret all technical drawing and part specification.

Education level:

1. Min. NTC/Nitec level ME/Mechatronic or its relevant.

Experience level:

1. Two (2) years in relevant experience in clerical environment or manufacturing or its relevant

2. Perform competent in clerical duties, computer literacy.

3. Result oriented, resourceful and independent.

4. Ability to read, understand mechanical drawing and Geometric Dimensioning and Tolerance.

Job Description & Requirements

1. Formulate and provide directives for Production Department in meeting organization's goals and committed to Quality Management System.
2. Accountable with the assigned factory sections in terms of production, New Model Development, Customer Service and Support, Supplier and Materials Management, Logistics and Transportation.
3. Analyze section profit/loss of projects and providing cost control and cost effectiveness strategy.
4. Provide production & material planning in ensuring production efficiency and on time delivery.
5. Ensure effective control of machine up/down time and well scheduled and optimized planning in machine / work-center load.
6. Manpower balancing and deplaoyment strategy with manpower skill set.
7. Continuous improvement program to ensure productivity, cost and quality effectiveness, general housekeeping and safety.
8. Formulate, identify and conduct management / training workshop to initiate / facilitate staff in aligning organizations missions and objectives and actions plans.
9. Support other function activities within the company to achieve the overall business goals and objectives.
10. Implement process improvement.
11. Authorize the appropriate use of performance monitoring and statistical techniques.
12. Ensure and coordinate the implementation of risk assessment and risk contol of medical devices.

Requirements:

• Preferred to have Diploma / Degree in Mechanical / Precision Engineering or equivalent.
• Minimum 6 years in a Manufacturing environment (preferably in Precision Engrg / Sheet metal industry) and with at least 4 years of supervisory capacity.
• Exposure with involvement in newly factory, product / process set-up is much preferred.
• In-depth understanding of manufacturing cycle and good budgeting control.
• Strong leadership with good analytical and problem solving skill, as well as dynamic in planning and result oriented.

• Ensuring the required materials are available for production
• Inspecting machinery and reporting any faults to management and workers.
• Identifying faults and troubleshooting wherever possible.
• Analyzing performance and products
• Establishing high-quality standards and ensuring they are implemented by workers.
• Implementing preventative maintenance methods.
• equipment maintenance

Production Technician Requirements:

• High school diploma or similar.
• Knowledge of production required.
• Experience in manufacturing would be advantageous.
• Problem-solving skills
• Excellent written and verbal communication skills.
• A positive attitude and willingness to work overtime when required.