Overall Job Purpose:

- Responsible for supervising or executing maintenance and operation of all Engine Room equpment and system.

- Guarantee efficient and safe operations and amaintenance of all Engine Room Equpiment and systems including emergency equpiment by supervising the Boiler and Utility Operators, orienting and working closely with them thus contributing to the production and revenue target acheuvement.

- Performs the test and dosage for boilers and cooling systems as well as the register of the information collected.

- Perform or delegate regular rounds checking all machinery spaces and equipment including steering gear room and all external equipment related to Engine Room located on Main DEck and Topsides as follow but not limited to : Inert Gas System , Bunkering station, Lifeboat/ Rescue Boats, FirePumps, reporting and ating upon any defects when required ensuring that all information to be properly registered on CMMS.

- Ensure that Oil Record Book is filled up timely in according to instruction which is included into the book itself and reaching out to the Superintendent for assistance in case of any doubt.

- Contribute to the proper planning of offshore activities by supporting Offshore Planner and Maintenance Supt in the prioritization and scheduling of services to be performed onboard , participating in discussions along with other Offshore leaderships when requested and duly approving all WOs for Engine Room work on CMMS.

-Assist to Planner and Maintenance Supt to review the maintenance plan by providing inputs for the plan based on own technical knowledge and experiences.. To inform CMMS team if detected any equp not covered by Maintenance Plan.

Requirements and Qualifications:

- Bach Degree in Nautical Sciences (Engines Specialty) or Maritime Institute / School required.

- STCW Certificate III / 1 or III/2 or equivakebt to satisfy Flag requirements is required.

- Minimum 8 years overall experience is expected.

-Previous experience in a leadership position has an advantage.

- Well written , spoken English is mandatory and advanced Portuguese is expected.

Overall Job Purpose:

Responsible for the execution of the Static Equipment Integrity Coordination scope of work, focusing in the Integrity Management Process of the equipment controlled by the MODEC's Own Service of Equipment Inspection, predictive maintenance, process performance and condition monitoring, quality assurance and quality control of subcontractors, and development and improvement of preventive and predictive maintenance plans, in order to ensure and maximize assets reliability, availability, maintainability, safety and integrity (RAMSI), as well as contributing to the Operations procedures and results achievement, established for the business.

Core Responsibilities:

Support the MdB's corporate annual budget planning (expenses and investments), by providing information based on previous experiences, technical knowledge, and best practices of the market.

Contribute to continuous improvement of IMS by following up and filling in projects status and updating and monitoring the implementation of IMS Documents under Static Equipment Integrity Coordination and maintaining the equipment master list updated.

Participate in risk analysis workshops and safety reviews to contribute with Integrity engineering expertise and support the Operations team.

Contribute to the Operation Reliability and its performance (inspection, non-destructive tests), regarding the Inspection Plan and guidelines of the Static Structure Integrity coordination, by monitoring and analyzing inspection results, guaranteeing the traceability of information, performing proper root cause assessments, and providing technical review/recommendation. Furthermore, develop, if necessary, together with the responsible of equipment design, proposal of modifications to prevent or mitigate the deterioration processes.

Contribute to the attendance to the maintenance and equipment inspection policies, regarding to the Reliability Engineering, by applying the guidelines and lessons learned from the Technical management.

Contribute to the compliance with the sector regulation (MPT, SPIE regulation/NR-13, etc.), by developing and executing inspections plans within the Static Structure Integrity coordination scope, focusing on Operational security needs, as well as monitoring KPI`s actions plans and elaborating SPIE reports.

Contribute to fleet performance improvement and safety by analyzing MOCs, TQs, NOIs, performing RCAs/FMEAs etc., and providing technical recommendations to support the Operation team.

Monitor process safety barriers' KPIs and provide technical recommendation, when necessary, to ensure the effectiveness of process safety barriers to maintain the facility's operation within ALARP level. Furthermore, it is extremely important to ensure the verification of the safety devices as safety valves, rupture discs, flare, etc., based on written procedures, in order to ensure safe condition for operation of equipment.

Elaborate technical recommendations or actions plans to meet the Operations needs and feedbacks of the Technical management, Fleet maintenance support, subcontractors, and Operations areas

Support MdB's BID/EPCI process by providing technical review and O&M cost review through bidding team and pre-ops team.

Participate in workshops with offshore inspectors and provide technical recommendations in order to ensure that their work is performed in compliance with contract specifications and legislation.

Sporadic embarkations on the vessels might be required for these activities.

Assist the organization in the external and internal audits by conducting the evaluation and approval of the

documentation requested by the legislation, providing the necessary clarifications regarding the integrity management system and the required evidence related to the controlled equipment. Moreover, record (information traceability) and analyze the audit results, defining or proposing actions to eliminate non- conformities.

Contribute to effective planning and monitoring of shutdown and decommissioning (equipment and offshore unit) plans by defining the shutdown scope (equipment list, NDT exam, tests, measurements, replacements, repairs, or modifications to be carried out) related to controlled equipment, through legal compliance and integrity evaluation.

Organize the activities related to NR 13 / SPIE together with the Equipment Inspectors from the Offshore Units, by including files and documentation, such as official books, calibration certificates, internal and external inspections, inspection reports, hydro-test and carrying out audit in the manufacturers.

Ensure that the information is addressed clearly and objectively so that everyone involved has a full understanding of this information. As well as establishing the integration between the departments involved in order to consolidate the quality of the information flow from the identification to the closing of the deviation and/or improvement.

Contribute to the definition if an equipment has or not condition to operate satisfactorily in order to ensure Operations reliability by participating in decisions or developing technical studies and informing to the involved ones the results of inspection reports, repairs or replacements recommended to restore the physical conditions in satisfactory levels.

Contribute to the hiring of 3rd parties to perform inspections on SPIE/NR13 Equipment and draw inspection isometrics by properly defining Scope of Work and participating in Kick-Off Meetings with potential suppliers.

Ensure the compliance with NR13 / MdB specifications in the fabrication of equipment by attending Hydrostatic Test at Manufacturer Workshop.

Ensure that all equipment is in condition to operate, complying with internal standards, NR13/SPIE specifications, by generating "punch items" lists as outputs of the initial inspections and following up the development of action plans on these lists.

Ensure the proper register of all Pressure Vessels, PSV, Boilers and all others static equipment by developing datasheets and inspections reports and filling in the integrity management software (SGI) with reliable and updated data on this equipment.

Ensure that Integrity Inspectors' and PSV Mechanical Technicians' work is performed in compliance with contract specifications and legislation, as well as complying with NR13/SPIE standards and procedures, by planning and following up the distribution of activities of inspection plans and providing technical recommendations when necessary.

Contribute to fleet performance improvement by constantly cooperating with other Tiers and Modec entities, to absorb and apply all lessons learnt from other Unit Phases (Commissioning, Operation, Maintenance, Decommissioning) for the new vessels in construction, as well as provide new lessons learnt and improvement opportunities discovered during the Pre-Ops project.

Sporadic follow ups in the shipyard during the Construction Phase and visits to vendors' factories might be required for these activities.

HSSE Requirements and Code of Conduct:

HSSE: Act in compliance with the corporate HSSEQ Management System Policy, the MODEC Life Saving Rules, and the policies, guides, process standards and work instructions available in the Integrated Management System (IMS).

Act to promote the preservation of the environment, the health and occupational safety (personnel and their team), the safety of processes, and the preservation of assets in their scale of responsibility.

Ethics and Compliance: In compliance with the Code of Business Conduct and Ethics, as well as with MODEC Group

Ethics and Compliance Policies and Local Procedures, their respective forms, online and live mandatory trainings: is committed to comply with all applicable laws, regulations and obligations and act in accordance with the highest ethical standards and with MODEC values.

Emergency Plan: As per indication on the Training Matrix, Emergency Management Guide and Offshore EmergencyManagement, available in the Integrated Management System (IMS).

Relevant Experience and Qualifications :

Junior Engineer : 2 years of overall experience is expected. Previous experience in Offshore/Onshore Oil & Gas area is a competitive edge. Previous experience in integrity management, implementation / maintenance of SPIE and ISO certificates, and failures analysis is a competitive edge. Previous experience as part of a SPIE technical group is a competitive edge.

Engineer : minimum 4 years of overall experience is expected. Previous experience in Offshore/Onshore Oil & Gas area is a competitive edge. Previous experience in integrity management, implementation / maintenance of SPIE and ISO certificates, and failures analysis is a competitive edge. Previous experience as part of a SPIE technical group is a competitive edge.

Senior Engineer : minimum 7 years of overall experience is expected. Previous experience in Offshore/Onshore Oil & Gas area is expected. Previous experience in integrity management, implementation / maintenance of SPIE and ISO certificates, and failures analysis is a competitive edge. Previous experience as part of a SPIE technical group is a competitive edge.

Engineer Specialist: minimum 10 years of overall experience is expected. Previous experience in Offshore/Onshore Oil & Gas area is expected. Previous experience in integrity management, implementation / maintenance of SPIE and ISO certificates, and failures analysis is a competitive edge. Previous experience as part of a SPIE technical group is a competitive edge.

Well written and spoken english with advance portuguese is required.

Intermediate Microsoft Office package knowledge is required. Basic CMMS systems knowledge is expected (SAP preferred). Basic Power BI knowledge is a competitive edge. Basic SGI knowledge is a competitive edge.

Overall Job Purpose

To independently define concepts and critical deliverables, plan, manage, direct, control, approve and deliver engineering deliverables required in multiple projects effectively and efficiently according to specified technical requirements, timelines and budget, manage project resources and independently deal with and resolve all Process related technical issues of the project, and provide guidance to the assigned teams.

Core Responsibilities

• Understands the specific technical requirements of the assigned projects (may include Construction, Commissioning and Offshore assignment) and Industry Standard, Classification Society and Regulatory requirements.
• Plans and directs the running of application software such as process simulation and other in-house software programs for Safety valve sizing, control valve sizing and line sizing etc., exposure to dispersion and transient analysis software, reviews and approves the calculations / deliverables prepared by Engineers /Senior Engineers/Lead Engineers.
• Directs other Engineers in the team to develop engineering specifications (drawings, data sheets, etc) specific to the assigned projects, reviews them and validates with the Project Managers and client before incorporating them in the RFQs.
• Independently evaluates bids received for special process packages from suppliers, performs or directs others to perform a technical bid evaluation process, involves in cost estimation, ensures selected vendors meet technical/engineering and delivery requirements as stipulated in the project specifications and gives assessment to the Buyer who will follow up in the tender evaluation, price negotiation and award process.
• Approves drawings and documents from team members as well as 3rd party-generated study reports and ensures the timely provision of accurate documents and specifications to the vendor/sub-contractor to enable thee to execute their work and deliverables.
• Independently manages/develops/provides advice on solutions to technical/engineering and related issues by reviewing the issues/data and analysis and evaluating various options/measures using expert knowledge, seasoned experience and precedents and professional references where necessary.
• Reports any deviation from MODEC standard specification and practices, concept change to Department manager and seek his approval on the solution.
• Anticipates potential problems and takes preventive actions and independently handles variations in project execution. Develop unique solutions for complex technical problems that may include new design concept.
• Visits critical process suppliers, checks and tests process items to ensure that they function as per specifications. Where necessary, works with the concerned suppliers/contractors to rectify the issues and ensures that they comply with the specifications and are ready on time.
• Leads/participates in meetings, reviews progress of projects and addresses complex interface/implementation/execution issues to ensure that the project proceeds timely and smoothly.
• Independently evaluate the Process requirement for all packages in Marine & Topside, contributes to technical bid evaluation process, ensures selected vendors meet technical/engineering and delivery requirements as stipulated in the project specifications
• Reviews progress of projects and addresses complex interface/implementation/execution issues to ensure that the projects proceed timely and smoothly.Plans and organizes resources and schedule.
• Provides technical/engineering support and expert advice to Construction/Commissioning, Offshore work at site, directs trouble shooting and follow up actions to rectify the gaps or problems. Handles more complex issues, and where necessary, provides off-site support and advice.
• Independently prepares Facility startup procedures, finalizes with Operations team input and provides expert advice / guidance / trouble shooting for facility startup at Offshore
• Guides/supervises junior Engineers and provides feedback to Department Manager for their performance.

Requirements:

• Minimum 15 years of relevant working experience in Process engineering in oil and gas sector for degree holders or minimum 14 years of relevant working experience for Master degree holder. Direct work experience on FPSO/FSO projects, min 3 projects of mega size, and market practices in the oil and gas sector.
• Must be conversant with the applicable industry standards, Company standards, specifications and procedures for his/her functional area.
• Language(s) and Software: List any special language requirement besides English and also any fundamental software skill(s) required by this job.

1. MS Office
2. AVEVA Engineering
3. Process simulation (e.g., UNISIM Design, etc.)
4. Flare system hydraulics (e.g., UNISIM Flare, etc.)
5. Piping system transient analysis and hydraulics (e.g., Flowmaster, etc.)
6. Fire water system hydraulics (e.g., Pipenet, etc.)
7. Separation vessel performance (e.g., MySep, etc.)

• can work on publick holidays
• can work on shifts/change of shifts
• can work and stand for long hours
• at least 10 years experiences
• 
  
• Provide overall supervision of production activities.
• Plan, organize and lead a team of production workers to achieve production target and output, cycle time, and yield.
• Improvement in maintaining product quality and productivity. Provide a guideline to check on processes thereby assuring that work is done by the operators.
• Monitor the daily efficiency status of the line.
• Ensure good housekeeping and safety at the workplace.
• Oversee hiring and training of food production personnel
• Perform other duties as assigned.

Overall Job Purpose

To lead, supervise, and guide Material and Corrosion Engineers in the preparation of Corrosion Assessment and Material Selection Studies for FSO/FPSO facilities (topsides/turret/marine) following Company Guidelines and Standards. The Lead Engineer may be also required to prepare such studies.

To lead, supervise, and guide Material and Corrosion Engineers in the preparation of Engineering deliverables associated with Materials and Corrosion discipline during FPSO / FSO projects FEEDs, Detailed Engineering and Execution phases effectively and efficiently according to the specified technical requirements, timelines, and budgets. The Lead Engineer may be also required to prepare such deliverables.

To interact with Group Leads at other entities (Proposal Office, Operations, etc.) to discuss and assess lessons learned, root cause investigations, etc. for improvement of Corporate Standards and Philosophies.

Responsibilities:

• Fully understand MODEC standards, client and regulatory requirements and ensure its discipline engineers work and deliverables comply with the requirements.
• Support Senior Lead Engineer / Technical Authority participating in the review cycle and preparation of Corporate Standards related to Corrosion Assessment and Materials Selection, Sour Service, Welding, Surface Preparation and Coatings, Cathodic Protection, Piping and Valve Materials, etc.
• (Propose improvement for the Standards).
• Provide overall supervision, guidance and support to Material and Corrosion Engineers during FEED, Detailed Engineering and Execution phases.
• The Lead is expected supervise and/or perform work to ensure the work and deliverables are performed/ issued as per Company Standards and Guidelines, as per Project Technical Requirements, with required quality, within budget, and in line with Company Goal of maximizing value to Company and all stakeholders through the life of the facility (i.e. maximize life cycle profit and uptime).
• Provide Training and Couching to Material and Corrosion Engineers in the areas of corrosion assessment, material selection, coatings, metallurgy, cathodic protection, etc.
• Interact with Group Leads at other entities (Proposal Office, Operations, etc.) to discuss lessons learned, root cause investigations, etc.
• Liaise with Operations Integrity Teams to participate in the improvement of Corrosion Monitoring and Chemical Injection Optimization Strategies.
• Represent Materials Group in key stakeholder (Client / Supplier / Sub-contractor / Class) meetings, reviews stakeholders’ documents / comments and addresses interface/implementation/execution issues and escalates where necessary to ensure that the project proceeds timely and smoothly.
• Participate in Manufacturer Qualification Programs in conjunction with Quality Group
• Participate in Research and Development Programs in areas of Corrosion and Corrosion Mitigation

Requirements:

• Materials & Corrosion Engineering degree at Bachelor or Master degree level.
• Minimum 12 years (with Bachelor) / 11years (with Master) relevant working experience as Materials /Corrosion Engineer in Oil and Gas Sector.
• Comprehensive experience in Offshore Oil and Gas Processing Facilities related to corrosion, corrosion mitigation strategies, corrosion monitoring, material selection, surface preparation and coatings, cathodic protection, metallurgy (welding, manufacturing), etc. and comprehensive knowledge of Industry Codes and Standards (NACE MR 0175 / ISO 15156, ISO 21457, ASME B31.3, NORSOK M001, NORSOK M501, etc.).
• Lead Engineer should be familiar with processing facilities and understand main process concepts involving Oil Separation and Stabilization, Produced Water Treatment, Gas Sweetening and Dehydration, Gas Compression, Seawater Treatment, etc.
• ECE (corrosion model) (preferred) or equivalent corrosion model

Modec is committed in creating a diverse and inclusive workplace. We take affirmative action to ensure equal opportunity for all applicants regardless of race, religion, national origin, gender, gender identity, sexual orientation, disability, age, or other legally protected characteristics

Purpose of the Job:

Responsible for Engine MRO operations for Commercial Engines Business Unit

Key Job Accountabilities:

• Oversee all aspects of engine MRO operations for Commercial Engines Business Unit
• Product portfolio comprises of CFM56 and LEAP narrow body aircraft engines
• Drive operational excellence and be accountable for engine on-time delivery and contractual TAT, cost control, productivity hit-ratio metrics as well as quality and safety compliance
• Plan and control engine build plans as well as allocate manpower and resources to meet monthly engine delivery commitments as per customers’ expectations
• Manage engine revenue hours to meet productivity hit-ratio and profit targets
• Ensure compliance of quality standards and regulations laid down by airworthiness authorities and engine OEMs
• Promote a safety culture within the production team and coordinate all environment health and safety issues for the business unit to ensure a safe workplace
• Lead in customer focus teams to liaise with customers and coordinate with various functions such as Sales, Customer Support, Materials and Engineering to ensure customer satisfaction in all engine maintenance programs
• Provide leadership and guidance to a production team of Workshop Engineers, Service Engineers and Technicians

Reporting Relationships:

Reports to Head of Operations, Commercial Engines

Required Experience and Qualifications:

• Mechanical/Aeronautical Engineering Degree with at least 3 years relevant experience as Production Manager or Workshop Manager in Aviation Industry
• Knowledge and experience in aircraft engine workshop practices and MRO of gas turbine engines will be a plus
• Knowledge of aviation authority regulations (CAAS, FAA, EASA, CAAC)
• Proven leadership track record with strong ability to drive and deliver results
• Highly motivated and self-directed with excellent problem-solving and analytical skills
• Able to work in a fast-paced environment and interact effectively with all operational levels of organization

Overall Job Purpose

The COE will reports to COE Lead and maintains responsibility for hands-on leadership in managing and supporting PTP (procure-to- pay), and related modules within MODEC’s global SAP system. This position represents the module expertise and will be responsible for maintaining and enforcing business processes, standard procedure, and template policy for SAP Procure-to-Pay process (MM module). This position will also be carrying out project planning and management for minor or medium scale projects.

Job Requirements:

• Provide operational support, finding solutions for incoming incidents. Investigate, monitor, follow up issues
• Working closely with the Procurement teams globally to grasp new business requirements and translate it SAP (non-SAP) Solution design
• As subject matter expert in procurement and supply chain area, carry out continuous improvement activities for the SAP template processes to meet business expectations
• Collaborate with business stakeholders to introduce new enhancements, processes and functionalities and tracking the business benefits
• Responsible of Modec’s SAP Template Governance
• Establishing, maintaining, and enforcing business processes, standard procedure, and template policy
• Working closely with different teams (eg: Basis, Abap, AMS) to ensure issues and requests are addressed timely
• Prepare proposal and presentation to stakeholders to communicate ideas and to obtain buy-in
• Carry out and manage minor or medium scale projects and ensure all aspect of the projects are aligned and risk being managed
• Support on-going business transformation activities within MODEC

Qualifications & Experience

Educational Qualification:
Bachelor's degree in related field
Certification(s):
SAP certification(s) strongly preferred

Basic Qualifications & Required Skills:

• Must have strong Procure To Pay process experience (PR, PO, GR, Invoice, Payment, Plant, Material, Vendor)
• Minimum 3 full life cycle implementation experience with SAP ECC 6.0 or newer version
• Experience with WM, Transport Management is nice to have
• Experience with Ariba Cloud Solutions is nice to have
• Proven ability to define user requirements and corresponding system specifications, accurate time estimates and creation of clear and concise documentation.
• Experience in preparing and reviewing of functional specifications for reports, Interfaces, and validations, creating and reviewing technical specifications.
• Experience in working as a lead position for 1 to 2 projects and co-coordinating Clients, Internal team members and providing business support.
• Have knowledge on project management and able to structure and scope a project and to manage a project through to completion.
• Experience in Data migration/Conversions related activities and development
• Expertise in preparing user training documentation, unit test scripts and Integration test scripts.
• Have exposure coordinating with Onsite/Offshore team members.
• Experience in supporting a global organization
• Established experience in working in a matrix management environment

MODEC Offshore Production Systems (Singapore) Pte Ltd is a leading provider of solutions to the Floating Offshore Oil & Gas market for more than 50 years and we are currently looking for Business & Project Management Analysts to join us.

Being part of MODEC means being the protagonist of a challenging career and being in touch with the latest deep-water production systems, knowing that your career begins in Singapore, but your talent can take you anywhere in the world. If you want to be one of the greatest in the market, this is your opportunity!

Why Join Us?

• Be part of a start-up team within a large, stable multinational company, and experience the best of both worlds!
• We highly value communication and teamwork, ensuring everyone's voice is heard and considered.
• Our Singapore office is conveniently located near the Buona Vista MRT station, occupying the top floors of The Metropolis Tower building.
• We offer a wide range of benefits including a comprehensive healthcare package, with flexible coverage for wellness, gym, vision, traditional chinese medicine and more.

Job Responsibilities

Strategy Management

• Support company leadership in defining strategic goals.
• Analyze organizational and operational strengths and weaknesses, as well as external market factors.

Performance Management

• Support department performance management through KPI monitoring and improvement initiatives.
• Calculate KPIs and prepare online management dashboards.
• Schedule and facilitate performance reviews with Leads, Heads of Departments and VPs.
• Maintain an effective performance management-cycle, adhering to standard methodology, and ensure timely preparation and accuracy in reported metrics.

Project Management

• Facilitate department project planning and update of project statuses on Schedule, Cost, Quality, Scope, Communications, Risk, and Stakeholders.
• Partner with departments to drive projects and initiatives, support analysis and problem definition, provide suggestions and improve cross-functional collaboration.

Process Management

• Map Standards, Process Maps and Work Instructions with the departments, following standard notation. and looking for process improvements.
• Champion the implementation of the company’s Integrated Management System and ensure consistency and quality in deliverables.
• Identify process gaps or opportunities for improvement and work with relevant departments to develop and implement solutions.

Minimum Requirements

• Bachelor’s degree in Engineering, Administration, Economics, Statistics, or IT.
• For junior analyst - open to fresh graduates or 1-3 years of relevant experience in Business, Quality and/or Process Management.
• For senior analyst - open to 5 to 8 years of relevant experience in Business, Quality and/or Process Management.
• Strong stakeholder management and critical thinking.
• Good analytical, organizational, communication and presentation skills.

Other Desirable Attributes

• Advanced MS-Excel / PowerPoint skills / MS-Project / PowerBI / PowerApps.
• Master’s degree, MBA or other post-graduate degree in Business, Project Management, Finance, or similar.
• Prior experience in Project Management, Business Transformation, Process Improvement, Business Process Re-Engineering or Management Consultant is preferred.

RESPONSIBILITIES:

• Performs routine tasks relating to manufacture, assembly, repair or modifications of products.
• Performs hand soldering, manual assembly, setup and operation of semi-automatic and/or automated assembly equipment and tools.
• Perform inspection and minor repair of product
• You might have to use visual aids, wiring lists, verbal and written instructions and other documentation to perform assembly work.
• Inspects component parts prior to assembly and rejects defective parts.
• Any other adhoc duties assigned by the management and supervisor.

REQUIREMENTS:

• Willing to commit to overtimes
• Preferably able to understand, read, and converse in simple English
• Physically fit and able to carry loads 10-15kg
• Able to start work immediately

OTHER INFO:

• Work Location: 452 Alexandra Road, Singapore 119961 [Near Labrador Park MRT]
• Working Days / Hours: [Once hired, shift is FIXED. There is NO need to perform rotating shift]

1st shift : 7am – 3pm [Mondays to Fridays]

2nd shift : 3pm – 11pm [Mondays to Fridays]

3rd shift : 11pm – 7am (next day) [Mondays to Fridays]

----------------------------------------------------------------------------------------------------

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).

At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

COMPANY OVERVIEW:

Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.

Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

• 
  
•  Perform box-build assembly &/or Testing.
•  Understand work instruction, follows production drawings and sample assemblies through Supervisor/Engineer guidelines, or receives verbal instructions regarding duties to be performed.
•  Required to operate and control equipments and peripheral hardware.
•  Required to operate and control the Production Line/Cell equipment and peripheral hardware, cleaning & maintains the equipment as per work instruction.
•  Monitors the shelf-life usage of perishable chemicals & Materials.
•  Monitors & control the moisture sensitive parts and ESD Material.
•  Empower worker & trigger abnormality.
•  Initiate supporting Engineer to adjust equipment or hardware when workmanship drops below quality specifications.
•  Assist Engineers in resolving quality issues, line balancing and production problems. Records data required for statistical process control, production related reports & inventory management.
•  Track & record DHR and other production related data and reports for Medical products.
•  Performs start or end of shift housekeeping (5S) on the exterior part of the equipment, peripheral hardware & workstation in production area.
•  May occasionally exposed to caustic chemicals, Bio-Hazard & minor Radiation with appropriate Training & PPE in job assignments. The noise level in the work environment is usually moderate.
•  May register as Radiation or Bio-Hazard Worker to handle potential radiation hazards or Bio-Hazard in job assignments.
•  May need to Inspects Raw Materials or Box build assemblies for nonconforming defects.
•  While performing the duties of this job, the employee is regularly required to stand, sit, walk and reach with hands and arms.
•  Job assignments may require frequent overtime (including weekends & holiday).
•  Perform trouble-shooting and testing of box-build units or Repair/ reprocess the box-build assembly.
•  Carryout and support ad-hoc activities as assigned.
•  Trains and certifies new hires or non-certified worker.
•  Assists to fill in Incident Reports and Non-Conformance Material Reports
•  Contribute to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets through participation of EHS programs
•  Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

Job Responsibilties:

1. Perform quality check on incoming, in-process, outgoing, return goods and existing materials.
2. Conduct laboratory testing in-house and send samples for external analysis.
3. Keep all QC check records and documents up-to-date and do proper filing for traceability.
4. Maintain proper documentation in accordance with food safety requirements.
5. Monitor GMP, personal hygiene practices at Production
6. Feedback Quality & safety issues promptly to R&D/QA Manager, working out actions needed
7. Support Customer Complaints investigation e.g. providing documents and sharing knowledge and observations
8. Report to R&D/QA Manager regularly at least weekly to update status of tasks assigned
9. Responsible for laboratory routine house-keeping program (5’S)
10. Report to R&D/QA Manager daily about work progress and challenges encountered so the Manager can provide support to clear obstacles
11. Prepare monthly reports (concise format) to R&D/QA Manager
12. Do other task assigned by superior.

Job Requirement:

• Minimum 1 year of experience in quality control/assurance in a manufacturing environment.
• Proficiency in MS Words and Excel
• Able to communicate well with others
• Know how to use measuring equipment
• Good eye vision
• Attentive to details

Interested Applicant may send your resume thru whatsapp +65 84597671

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

As a Laboratory Technologist in NUS Centre for Additive Manufacturing, the incumbent needs to work on the following areas:

• Operate and maintain various 3D printing machines and other facilities in the laboratory.
• Provide 3D printing services with metals, ceramics, polymers, etc., and support NUS researchers, industry and hospitals in projects related to 3D printing.
• Help Laboratory Manager in safety management and procurements of consumables, etc.
• Provide technical support and user training in 3D printing.

Qualifications

• Diploma or equivalent in Engineering, Design, Biomedical or Material Sciences.
• 1 year of working experience.
• Prior knowledge or experience in operating high-end 3DP equipment and/or experience in product design will be a plus in the job.
• Self-motivated, and a good team player

Responsibilities:

• Sourcing and purchasing of electronics components, machining and mechanical parts
• Negotiates with suppliers for better pricing, quantity, delivery fulfilment
• Issue Purchase Orders based on purchase requisition
• Ensure on-time delivery
• Following up on outstanding backlog and expediting of urgent materials
• Alternate sourcing and support cost reduction program

Requirement:

• Minimum Diploma in Electronics Engineering/Manufacturing/Purchasing
• Minimum 2 years of purchasing experience in electronics manufacturing industry
• Experience in machining/metal stamping parts will be added advantage
• Negotiation Skills
• Proficient in MS Words and Excel

Primary:

To provide creative and operational elements of Audio in broadcast standard environment for all TV Production, OB and Studios events.

Responsibilities:

• Assist in planning and the execution of the audio plan to develop the appropriate audio requirement for TV production.
• Assist in handling of basic TV broadcast Mix Audio operations, Front-of-House (FOH) & Stage monitoring operation and ensure consistent audio quality during live and recorded productions.
• Maintain proper records/inventory of the sound equipment and follow up on equipment under repair.

Qualifications:

• NITEC in Electronics/Electrical Engineering/Audio/Video Field or Diploma in Audio Engineering / Film, Sound and Video.
• Willing to work on shifts.
• Experience in setting up sound system.
• Experienced in Audio Mixing and Recording Operation.
• Experience in the Maintenance of audio equipment.
• Strong Communication skills and Problem Solving.

Responsibilities

• Understands the basic and essential specifications and requirements of the assigned project and Industry Standard, Classification Society and Regulatory requirements.
• Prepares the cable block diagram, interconnection diagram, loop diagram, I/O list and instrument index specific to the assigned project.
• Prepares engineering specifications (drawings, data sheets, etc) specific to the assigned project and validates them with the Senior/Lead Engineer or Project Manager before incorporating them in the RFQs.
• Evaluates with guidance from Senior/Lead Engineer, the basic items of all the bids received for I&C packages from various suppliers and performs a technical bid evaluation process against the project specifications.
• Prepares accurate documents and specifications timely to be provided to the successful vendors to enable the latter to execute their work and deliverables.
• Develops solutions to the less complex range of technical/engineering and related problems by analyzing the issues/data, interpreting the analysis and proposing various options/measures using experience, precedents and professional references.
• Under supervision of senior/lead engineer evaluates the I&C requirement for mechanical packages in Marine & Topside, contributes to technical bid evaluation process, and ensures selected vendors meet technical/engineering and delivery requirements as stipulated in the project specifications.
• Participates in Factory Acceptance test/Site Acceptance test to ensure that Instrument items function as per specifications. Where necessary, works with the suppliers/contractors concerned to rectify the issues & making sure that they comply with the specifications and are ready on time.
• Participates in meetings, reviews progress and helps address interface/implementation/execution issues, escalates where necessary to ensure that the project proceeds timely and smoothly. Follows up to implement continuous improvement or lesson learnt actions items.
• Provides technical/engineering support to Construction/Commissioning work at site, helps trouble shoot and follows up to rectify the gaps or problems. Where necessary, provides off-site support and advice.
• Guides junior Engineers.

Qualifications & Experience

• Bachelor in I&C Engineering
• 7 years of relevant working experience in I&C engineering in oil and gas sector.
• Comprehensive knowledge on functionality of FPSO

COMPANY DESCRIPTION

Mediacorp is Singapores largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

Primary Purpose:

Manage and supervise the daily activities of the team members in accordance to the production specifications and requirements. Ensure that the team meets standard in terms of operation efficiency, and service uptime. Develop the capability of team members.

Job Responsibilities:

• Supervise a group of cameraman and guide them in all video technical set up. Review and update SOPs.
• Conduct annual review and assessment of team members training needs.
• Guide crew in camera operation (i.e. general camera system set up, angles, distances, movement) and overall operations concerning video, audio and electrical for TV production.
• Perform duty as Technical Producer for major production whenever necessary. Ensure production meets broadcasting standard. Anticipate problem and provide solution on complex issues.
• Provide contingency planning and ensure deliverable of production setup are adhered.
• Keep abreast of broadcasting technology development and industry standards and workflows. Offers recommendations for upgrades and changes to ensure operations are kept relevant and competitive.

• Diploma in Film Production or Electronics/Electrical Engineering or Audio related field.
• At least 10 Years of Ligting experience is preferred.
• Possess in-depth working knowledge of overall unit operations concerning camera, video, audio, lighting and electrical for TV Broadcasting.
• Possesses knowledge of camera systems, lenses and camera support equipment will be added advantage.
• Familiar with international broadcast standard, preferably ITU (International Telecommunication Union) and EBU (European Broadcasting Union) broadcast standard.

Primary Purpose:

Manage and supervise the daily activities of the team members in accordance to the production specifications and requirements. Ensure that the team meets standard in terms of operation efficiency, and service uptime. Develop the capability of team members.

Job Responsibilities:

• Supervise a group of cameraman and guide them in all video technical set up. Review and update SOPs.
• Conduct annual review and assessment of team members training needs.
• Guide crew in camera operation (i.e. general camera system set up, angles, distances, movement) and overall operations concerning video, audio and electrical for TV production.
• Perform duty as Technical Producer for major production whenever necessary.
• Ensure production meets broadcasting standard.
• Anticipate problem and provide solution on complex issues.
• Provide contingency planning and ensure deliverable of production setup are adhered.
• Keep abreast of broadcasting technology development and industry standards and workflows. Offers recommendations for upgrades and changes to ensure operations are kept relevant and competitive.

Qualifications

• Diploma in Film Production or Electronics/Electrical Engineering or Audio related field.
• At least 10 Years of Ligting experience is preferred.
• Possess in-depth working knowledge of overall unit operations concerning camera, video, audio, lighting and electrical for TV Broadcasting.
• Possesses knowledge of camera systems, lenses and camera support equipment will be added advantage.
• Familiar with international broadcast standard, preferably ITU (International Telecommunication Union) and EBU (European Broadcasting Union) broadcast standard.

Job Responsibilities:

• Ensure production output, downtime, defects and spoilage meet targets
• Ensure production processes adhere to specifications and quality standards
• Ensure all GMP, 5S Housekeeping, Safety, and Health standards are well-maintained
• Manage, control, and allocate manpower to support daily activities of the production operations
• Identify and implement areas for continuous improvement
• Identify training needs and cross-training of operators and technicians to develop workforce capabilities
• Liaise with supporting functions to resolve operational issues
• Implement overall cost control and cost-saving measures.
• Plan & submit Capex proposal for improvement plan within the department.
• Lead a team of preventive maintenance technicians to repair and maintain production machines.
• Perform engineering analysis to resolve customer complaints, machine breakdowns, and OEE.
• Work closely with QA to investigate problems and perform root cause analysis to establish preventive or corrective actions.
• Any other ad hoc duties assigned by the supervisor or management.

Job Requirements:

• Possess a minimum Diploma in Engineering or equivalent
• Possess experience managing production lines with a minimum of 2 years of experience in the Manufacturing industry.
• Good knowledge of lean Manufacturing, Six Sigma and other quality methodology
• Analytical thinker with strong interpersonal skills
• Excellent communication and problem-solving skills
• Knowledge and experience in upholding quality and EHS management systems

By submitting an application or your resume, you are deemed to have consented to Elitez Pte Ltd collecting, using and disclosing your personal data for the purposes stated in our privacy notice (www.elitez.asia/privacy-policy/). You acknowledge that you have read, understood, and agree with the terms in our privacy notice.

We regret that only shortlisted candidates will be notified.

Registration No: R23113834

Job Scope :

1. Assist in the day-to-day warehouse operations.
2. Assist to ensure goods received in order and in good condition.
3. Assist in Stock Count and verification of packing list.
4. Assist in Packing and Label.
5. Assist in loading/unloading of container
6. Any Ad hoc duties assigned.

Working Hours: 8am to 5.18pm

Requirement:

-Able to carry heavy item

-Have forklift licence would be an advantage

Job Types: Full-time

Gross Salary: S$1400

Salary up to S$2000

Roles and Responsibilities:

Ensure the safe and efficient management of production operations and process its duties. Oversee the Permit to Work (PTW) system, ensuring that permits are coordinated between the Production Department and other departments and disciplines.

Optimize production, taking account of maintenance requirements and other constraints. Manage and direct the work of production personnel.

Ensure that all process plants are properly monitored and controlled via the FCS, controlling ESD operations and other control panels.

Co-operate with the OIM and other with plan for annual I & T’s.

Participate in the investigation of accidents and incidents, formulate reports and provide corrective actions as appropriate.

Qualifications and Experiences:

10 years of offshore experience, including at least 5 years at a supervision function

Degree in Bach of Engineering

Fluent in English and Portuguese to deal with Portugeuese speaking stakeholders.

COMPANY DESCRIPTION

Mediacorp is Singapores largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

• Modulate and monitor audio for news and documentary production.
• Mix and balance for different situations and environment during recording and live events.
• Make immediate decision on choice of microphones, recorders, mounts, etc on location shoots.
• Advise producers and reporters on audio techniques and uses.
• Operate the second camera when required.
• Perform basic maintenance of audio equipment.
• Edit sequences using Adobe Premiere or other editing systems and send via FTP using broadband network or via satellite broadcast.
• Set up and operate satellite communication and transmission devices and equipment during outdoor production locally and overseas.
• Required to travel overseas for news and documentary assignment as and when required.
• Required to work in different environment and situations, e.g. disaster zones or high risk areas such as hospitals during epidemic outbreak.
• Required to drive company vehicles for outdoor shoot for news and documentary production.

• Preferably at least 5-years of relevant experience.
• Experience handling audio equiptments.

Overall Job Purpose

• Responsible for directing the Offshore activities related to Asset Integrity .
• The Offshore Integrity Inspector shall be the offshore MODEC representative for all inspection and anomaly liquidation activities. .
• Manage the offshore planning, coordination, execution, and supervision of asset integrity inspections.
• Provide oversight on the execution of safety critical inspections executed on the Facility. Lead and co-ordinate high quality integrity management activities for the Facility.
• Provide integrity repair recommendations, remaining life data and anomaly liquidation prioritization based on risk using COABIS and AIMS.
• Assure that the integrity management system and required SAP work orders for the Facility is enacted offshore by the required due date to meet RBI plan and KPI.
• Ensure compliance with Class, Statutory, International and Local Regulatory requirements regard to the integrity of the process, marine and structural systems of the FPSO.
• Develop wherever required risk-based inspection techniques and philosophy, asset management fundamentals and operational lessons learned.
• Liaises with all departments and stakeholders to ensure the Inspection and Integrity Management Framework and CMMS System are supported, consistent with the MOSEN business objectives.
• Provide support and guidance to the offshore inspection and fabric maintenance personnel when required, and support for onshore personnel during offshore visits as required.

Required:

• 10+ years’ experience in oil and gas industry, with 5+ years minimum FPSO experience.
• Experience with Offshore & FPSO is mandatory.
• Expert knowledge and understanding of the applicable legislative, international inspection standards for offshore Oil & Gas Facilities.
• Fluent English.
• Fluent Portuguese speakers are mandatory.
• Basic French is expected

Software:

• COABIS

• AMOS

• SAP

• Fitness for Service Software

Educational Qualification:

• Tertiary education expected - engineering preferred but extensive operational experience in similar environments equally valid.
• Post Graduation in Mechanical Engineering mandatory.

The successful candidate will focus on developing and articulating solutions for our clients, working with multi-functional teams, and driving conversations at the most senior levels of our client’s organizations in the Manufacturing sector.

Key Responsibilities:

Generate sales opportunity to achieve short and long term revenue and profit growth

Execute direct sales programs and initiatives to drive sales

Develop and execute sales strategy for the accounts assigned

Develop and maintain a high level understanding of end-to-end IT offerings including IT infrastructure, security technologies, IT application, ERP (e.g. SAP) managed services, digital transformation and SMART Manufacturing in local competitive environment

Manage overall sales process from pre to post-sales

Take active lead to engage partners in customer engagement and solutioning

Responsible for proposal creation and delivery

Engage customers at all level to develop long term business relationship

Engage internal stakeholders in sales approval process

Job Requirements:

Minimum 5 years of working experience in IT solutions sales, with the ability to demonstrate a high level of understanding of the latest technologies, preferably from SI environment

Diploma/Degree in Computer Science/Information Technology or equivalent

Demonstrate experience in managing sales pipeline

Experience in selling with partners and enterprise customers

Experience in the manufacturing sector) sales will be added advantage

• To ensure that all operational duties by the team are completed on a daily schedule, ahead of time, efficiently and effectively
• To provide excellent customer service and management and to ensure that all your staff understands the importance of such standards
• Ensure smooth day-to-day operation of the team
• Obtain sales target and KPIs given by the management
• Assist in planning schedule
• Promote positive work environment
• Ensuring compliance with licensing, hygiene and health and safety legislation/guideline
• Develop strategic and operational plans for managing execution and measuring results
• Any other duties as may be assigned by management
• Able to work night shift and split shift
• Able to work OT on weekends and public holiday
• Must be able to work night shift or split shift
• Must be able to work extra hours or weekend if needed
• · Must be able to work night shift and split shift
• · Must be able to work extra hours or weekend if needed

PEDRO has been part of the CHARLES & KEITH GROUP since 2005. Here, we believe we can create a better world by empowering individuality through the art of fashion. By relating, refining and reinventing, we create updated essentials that blend seamlessly into different wardrobes of style. With that, we look to enable individuals to celebrate and express their unique identities as well.

With empathy at the heart of PEDRO, we curate and create with a curious mind, constantly evolving with the world around us, to empower people with confidence from all backgrounds, regardless of who they are and what they look like.

Since our inception, we have launched both men’s and women’s collection of footwear and accessories that extends beyond our 109 global stores to an online shopping experience at pedroshoes.com

Our modern-day collection continues to inspire 19 countries across Asia Pacific, the Middle East, and the United States of America.

THE ROLE

As our Video Production Intern, it is ideal that you are a bright, curious creative and approachable person. You are someone who understands the brief strategically, is able to propose relevant solutions/touchpoints, before creating videos for social media, websites and ads. You will also be working closely with the creative team to support in content creation on video production.

You will be tasked to assist and report to our in-house videographer - and will take an active role in all disciplines fromvisual storytelling such as directing, conceptual storyboarding from pre to post production.

THE IDEAL CANDIDATE

We are looking for a responsible candidate who can:

• Edit footage, sound files, create and animate motion graphics, adding music/VO/special effects.
• Able to handle camera and lighting equipment like strobes (eg. profoto) and constant lights (eg. Aputure), setting up c-stands, light stands, etc.
• Be organised with archiving files.
• Assist the team with pre-production work (ie. storyboarding and creating/collaborating on production decks)
• Think different, is willing to take risks and can handle rejection/criticism constructively
• Monitor the condition of equipment including video production lighting, sound, rigging equipment; arranges for the repair and replacement; performs preventive maintenance on equipment
• Value-add to our creative process. A solution-seeker who is confident in your abilities to create meaningful production work, that aligns with our objectives
• Assist with Video/Photo shoots, as well as other ad-hoc duties when required
• Work effectively within a team and can communicate his/her ideas & feedback constructively
• Support other ad-hoc request from corporate and any other duties and responsibilities assigned by supervisor

KNOWLEDGE AND SKILLS

• Able to commit for a minimum of 3 months. Extension available (subject to business needs)
• Proficiently work across the Adobe Creative Suite. (Particularly in Premiere Pro, After Effects, and Final Cut Pro)
• Kindly include a portfolio or work samples showcasing creative storytelling in videography in your resume
• Graphic design capabilities and AR Digital Design are desirable

We regret that only shortlisted candidates will be contacted.