• Monitor materials status of the China CM and EU CM and materials fulfilment to meet sale orders demand and forecast demand.
• Manage site inventory and PO to suppliers and make sure CM can cover the demand according to supply Lead Time.
• Release PO to suppliers on behalf of external factory, handle delivery or PO supersede by CM, arrange allocation and shipment to CM.
• Develop related operations flow and documented as standard operating procedures for the internal and outsourcing supply chain process.

Requirements:

• Diploma in Supply Chain Management or equivalent
• At least 4 years of Planning/Supply Chain experience in the electronics manufacturing industry.
• Good understanding of the Supply Chain and MRP activities.
• Proficient in SAP system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Thoroughly observe SPC parameters and control charts.
• Implement measures to enhance tool capability performance.
• Investigate quality issues and conduct initial troubleshooting.
• Escalate unresolved problems to the Supervisor and Technology Engineers.
• Manage the dispatch of products to the tool.

Requirements:

• Diploma in engineering or equivalent.
• 2 years of working experience in the related field.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

• Prepare, setup and qualify machines before shipping out from factory to customer.
• Support site service as to when required.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Responsibilities

• Responsible for improving manufacturing process and equipment capability to achieve higher production yield and quality
• Responsible in driving cost reduction programs through continual improvement activities
• Responsible for supervising plating technicians and operators in meeting manufacturing requirement

Requirements

• Min Degree in Chemical Engineering/ Mechanical Engineering or relevant
• Min 2 years of working experience in plating industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for establishing strategic relationship with customer and supporting in customer's day-to-day operation and shipments
• Responsible in collaborating and coordinating with cross functional teams to achieve delivery commitment and meet customer's
• Responsible for managing backlog, prioritize customer's needs, provide alternate and garner resources to ensure seamless operation and program execution
• Responsible for reviewing customer demand forecast and resolve material supply constraints to support customers' delivery request dates

Requirements

• Min Degree in Engineering or relevant
• Min 8 years of working experience in Manufacturing Industry in program management and planning

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

• Thoroughly observe SPC parameters and control charts.
• Implement measures to enhance tool capability performance.
• Investigate quality issues and conduct initial troubleshooting.
• Escalate unresolved problems to the Supervisor and Technology Engineers.
• Manage the dispatch of products to the tool.

Requirements:

• Diploma in engineering or equivalent.
• 2 years of working experience in the related field.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

Responsibilities

• Responsible for managing customer feedback and maintain relationship with the customers
• Responsible in resolving customers’ complaints and operational issues to achieve customers’ satisfaction
• Responsible for handling customers’ inquiry/ tender for the company products and services
• Responsible for processing quotation and sales order on day to day basis
• Responsible for tracking and reporting on submitted quotation and tender status

Requirements

• Min Diploma in Engineering, Manufacturing or other relevant discipline
• Min 1 years of working experience in Oil & Gas/ Precision/ CNC Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for ensuring at all confidential secretarial and administrative duties are completed timely and within established company guidelines
• Responsible for managing the appointments and meeting schedules of the VP
• Responsible in assisting in preparation of presentation materials and meeting minutes
• Responsible for making travel arrangements and hotel bookings for visitors from overseas and local employees travelling overseas, including VISA related issues.
• Responsible for preparation and liaison for air shipment and courier activities

Requirements

• Min Diploma in any field
• Min 3 years of working experience in secretary

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for managing the daily production status review and update
• Responsible for material shortages review, updating to production and expediting buyer to meet planned demand
• Responsible for updating BOM for Eco approval and reviewing materials impact
• Responsible for date change and customer demand report review for new order
• Responsible for customer demand report review for new order and date changes

Requirements

• Min Diploma in Engineering, Supply Chain or Business
• Min 3 years of working experience in Planning in semiconductor or related manufacturing industries

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

• Perform ATE Test Program Design and Development for new products (Production and Characterization Test)
• Design and create Final Test Loadboard and Wafersort Probecard
• Manage Characterization Testing, prepare test specifications, define tests, conditions, criteria, etc.
• Responsible for test debugging, RMA analysis, and improving test solutions (HW and SW)

Requirements:

• Degree in Electrical/Electronic Engineering
• At least 3 years of ATE Test Program Development (C++/VB) experience with J750, UltraFlex, Advantest 93K, Advantest T2K test programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

Company's Profile

Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Facilitate machine preparation, setup, and qualification for shipment
• Occasionally support on-site services within and outside Singapore

Requirements

• Proficient in mechanical and electrical control systems.
• Knowledge in machinery automation (electrical, servo, sensor, pneumatic systems) and adept at reading mechanical drawings and using measurement tools.
• I/O check and troubleshooting, knowledge in mechanical alignment, motor tuning, vision systems

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Bryan Tay @ 97559161
Shortlisted Candidates will be notified

Bryan Tay Reg No. R23112463
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Responsibilities

• Responsible for setting and operating CNC Machines
• Responsible for performing preventative maintenance on product equipment
• Responsible for performing other duties as and when required

Requirements

• Min Nitec in Engineering
• Min 1 years of working experience in Precision/ CNC Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Company's Profile

Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Facilitate machine preparation, setup, and qualification for shipment
• Occasionally support on-site services within and outside Singapore

Requirements

• Proficient in mechanical and electrical control systems.
• Knowledge in machinery automation (electrical, servo, sensor, pneumatic systems) and adept at reading mechanical drawings and using measurement tools.
• I/O check and troubleshooting, knowledge in mechanical alignment, motor tuning, vision systems

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Bryan Tay @ 97559161
Shortlisted Candidates will be notified

Bryan Tay Reg No. R23112463
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Responsibilities

• Responsible for managing and leading Engineering Team
• Responsible for leading the team to identify and reduce waste, improve process time utilization and cost reduction initiatives to increase manufacturing productivity
• Responsible for timely and accurate completion of manufacturing routing for turn- key production work order

Requirements

• Min Diploma in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in Precision/ Machining/ CNC Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for evaluating and qualify products to fulfil customer expectations regarding reliability, usability, and operating life

Requirements

• Min Diploma in Engineering
• Min 2 years of working experience in failure analysis of metals and materials related products
• Experience with test or life cycle management tools an advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for establishing strategic relationship with customer and supporting in customer's day-to-day operation and shipments
• Responsible in collaborating and coordinating with cross functional teams to achieve delivery commitment and meet customer's
• Responsible for managing backlog, prioritize customer's needs, provide alternate and garner resources to ensure seamless operation and program execution
• Responsible for reviewing customer demand forecast and resolve material supply constraints to support customers' delivery request dates

Requirements

• Min Degree in Engineering or relevant
• Min 8 years of working experience in Manufacturing Industry in program management and planning

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for conceptualize the assembly process either in semi-auto, fully automatic machines or multi-purpose fixtures for new products with both quality and cost considerations
• Responsible in planning, excuting and completing assembly process per the established timing and quality requirements.
• Responsible for design, coordinate fabrication, assembly, debug and test run the equipment.
• Responsible for establishing process parameters for all new assembly operations/machines and update all process specifications or issues before release to manufacturing.
• Responsible for production output, quality & yield during the transfer phase to production.

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in process development
• Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job Title: Production Operator (ID4006)
Location: Gul Circle
Working Hours: Mon to Fri 8.00am-5.30pm
Salary: $2000-$2200


Job Scope:
As a production operator, you will be responsible but not limited to the following duties:
• Polishing
• Decay Testing
• Inspection
• Assemble products
• Packing
• Operate Machine will depend on urgent requirement
• Other ad-hoc duties assigned by supervisor.

Job Requirements:
• ITE certification or some working experience in the industry will be an advantage
• To carry a weight 5kg good during production
• Flexible in job arrangement as the cell leader can move the operator within the company
• Able to work overtime when required

We are currently based at Metropolis, Buona Vista, Singapore. This is a 24 months fixed term contract role, with possibility of extension.

Overall Job Purpose

The Information Management and Document Control Coordinator will support the Information Management Lead and Document Control Lead in managing project information and documentation. This role will involve coordinating with various project teams, ensuring compliance with information requirements, and assisting in the development and implementation of information management strategies, plans, and procedures, with a focus on delivering value for the business.

The Information Management and Document Control Coordinator will play a crucial role in ensuring the smooth flow of information and document throughout the project lifecycle. This position offers an excellent opportunity to contribute to the success of the project and the organization's information management objectives, with a focus on delivering value for the business.

Responsibilities

• Assist the Information Management Lead and Document Control Lead in managing project information and documentation in accordance with agreed procedures.
• Be familiar with and execute in compliance with the Project Document Management Strategy, Information Management Plan, and relevant requirements.
• Execute and provide the status of project tracking and archiving of deliverables throughout the project lifecycle (recording revisions, revision purposes, distribution and transmittal histories) in accordance of project requirements.
• Support the development of IM key performance indicators and issues.
• Prepare and issue periodic reports describing status and issues for document management.
• Maintain the various functionalities of Engineering Document Management System (EDMS), such as workflows, transmittals, uploading, and downloading electronic files, searching functions.
• Provide on-boarding training for project team members relating to Document Control.
• Ensure all applicable metadata fields are accurately updated and maintained in applicable Document Register(s).
• Liaise with the corporate and project team in Document Control section to achieve corporate goals and directions in project execution.
• Support the rollout and testing of new EDMS tools/ for the project, ensuring a smooth transition and adoption.
• Utilize methodologies to drive continuous improvement in document management processes and tools.
• Develop concepts for document control and effectively communicate them to the project team.

Requirements

• Bachelor’s degree in Engineering, Science, or a related field.
• A minimum of 10 years of experience in the Offshore Oil and Gas Industry, with a focus on Information Management or Document Control roles
• Demonstrated expertise in setting up, rolling out, managing, and utilizing Electronic Document Management system
• Strong speaking and writing skills of English
• Familiarity with EPC and O&M processes, as well as relevant systems and software
• Excellent communication skills and a strong team player attitude
• Proven ability to manage and coordinate effectively with various stakeholders.
• Strong analytical and problem-solving skills.

• Perform ATE Test Program Design and Development for new products (Production and Characterization Test)
• Design and create Final Test Loadboard and Wafersort Probecard
• Manage Characterization Testing, prepare test specifications, define tests, conditions, criteria, etc.
• Responsible for test debugging, RMA analysis, and improving test solutions (HW and SW)

Requirements:

• Degree in Electrical/Electronic Engineering
• At least 3 years of ATE Test Program Development (C++/VB) experience with J750, UltraFlex, Advantest 93K, Advantest T2K test programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

The organization is seeking a highly qualified candidate to support synthetic-related outsourcing associated with execution of external development, commercial and clinical supply. The position will have a focus in synthetic small molecule drug substance/process chemistry and serve as a key enabling role in a high- performing cross-functional organization. Individual projects may span development, sourcing (e.g., requests for proposal and site selection), supplier onboarding, and manufacturing activities for both non-GMP and GMP commercial / clinical deliverables.The Contract Development and Manufacturing team develops and implements the external sourcing strategy for the firm's portfolio from early phase through commercial delivery. This role will support engagement and oversight of the client's Contract Development and Manufacturing sites through executing activities according to Good Manufacturing Practices (cGMP) principles and the business practices.

Job Responsibilities:

Day-to-day oversight for external synthetic/process chemistry-related projects:

• Overseeing ongoing activities at selected sites along with any subcontracted sites to ensure project deliverables, including compliance, timelines, product quality, and cost
• Working closely with the team and internal stakeholders to support sourcing activities, including managing scope of work (SoW) and quotation request documents
• Coordinating requests for shipment of materials/samples between sites
• Managing purchase orders and invoices
• Overseeing deviations investigations and change managements as needed
• Performing other related duties and tasks as necessary or as assigned
  

Basic Qualifications:

• Bachelor's Degree & 5 years of Pharmaceutical Industry experience

Preferred Qualifications:

• General knowledge of synthetic drug development and manufacture
• Strong understanding of cGMP and Regulatory/CMC policies and requirements
  Experience with interfacing and managing CRO and CMO relationships
• Experience with change management, deviation investigations and implementation of corrective/preventive actions
• Understanding of tech transfer, drug development and commercialization of synthetic therapeutics
• Experience working in cross-functional settings
• Experience as a team member or leader of cross-functional or matrix team
• Strong Project management and coordination skills/experiences
• Strong interpersonal relationship and communication skills both written and verbal
  

Interested candidates may apply through the application system. We regret to inform only shortlisted candidates will be notified.

EA License No. 01C4394 • RCB No. 200007268E •Derrick Tiew Yong Han EA Registration No. R1877971By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Responsibilities

• Oversee all international assignments (both inbound and outbound) and ensure compliance with the policies
• Part of the People Services Team whose mandate is to ensure that we uplift our service delivery to internal clients
• Work closely with various stakeholders / counterparts to build up and refine the current international assignment policies
• Constantly review international assignment guidelines to ensure compliance and market competitiveness
• Review end-to-end workflows and processes and constantly seek opportunities for simplification
• Advice, coach and guide team members on regulations and approaches to international mobility, immigration and tax
• Act as a trusted advisor to all stakeholders and be in a position to influence management on matters related to international assignments
• Be up to date with changes to immigration related legislations / guidelines and keep abreast of best practices for Mobility within the MODEC group and amongst other companies in similar industry

Requirements

• At least 8 years of experience in managing international mobility operations and program with emphasis on immigration matters
• Good knowledge of immigration legislation and procedures for Singapore, China and Southeast Asia countries
• Excellent communication skills and ability to interact with all levels of employees
• Experienced in vendor management
• Ability to analyze data and drive data-based decisions and actions
• Strong business acumen and business partner mindset
• Good project and change management skills