Responsibilities:

• Assists in preparing Work Plan and manpower requirements based on the Work scope / Specification
• Delegates job to supervisors and plan manpower required for jobs in accordance to the budgeted man-hours
• Coordinates between the different trades and resolves problems encountered in project
• Reads and interpret Piping ISOMETRIC Drawing /P&ID Drawings
• Prepares Material Take-Off (MTO) based on Piping ISOMETRIC Drawing /P&ID Drawings
• Utilizes different pipe welding materials
• Raises and approve Purchase Request for materials and equipment required for the jobs accordingly
• Monitors work of sub-contractors to ensure that quality and workmanship conform to company standards
• Ensures all standard operating procedures comply with specifications, quality standards, statutory and regulatory requirements

Requirements:

• Bachelor’s degree in Engineering/ Marine Engineering or related engineering disciplines
• Minimum 2 years of relevant working experience in piping discipline
• Able to multi-task and able to work in a fast-paced environment
• Must be able to board ships, enter confined spaces with limited visibility and have the ability to climb up and down stairs and/or ladders of varying heights.
• Occasional short-term overseas visit or inspections as per project requirements
• Good in planning, analyzing, communicating and independent work
• Excellent proficiency in English (written and spoken)

Responsibilities:

• Monitor processes to reduce costs by utilization of manpower, equipment, facilities, materials.
• Drive improvement on best practices with emphasis on productivity & product quality.
• Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.
• Work with HR to address employee grievances are addressed in a timely fashion.
• Review, evaluate & train employee performance to determine competency & knowledge.
• Improve work safety and practices and maintain housekeeping in all areas.
• Submission of overtime record to HR Dept for computation of monthly salary.
• Prepare process documentation such as work instruction, process specifications and quality plan.
• Prepares reports, analyzes data, and makes recommendations for improving plant operations.
• Trained and participate in maintenance program to achieve in a safe, timely, and cost-effective manner.
• Communicate with internal teams to resolve production and maintenance issues.
• Assist in hiring of production personnel.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.
• Maintain and update operating training manuals for all manufacturing processes.
• Perform any other ad-hoc projects or tasks

Requirements:

• Diploma/Degree in Manufacturing/Electrical /Mechanical / Engineering discipline.
• Minimum 5 years working experience in manufacturing environment.
• Able to supervise and lead the subordinates.
• Knowledge in ISO is an advantage.

Interested applicants, send in your updated resume by clicking “Apply Now”

Michelle Koh

EA License No.: 23C1894

EA Personnel No.: R1656105

Salary: up to $2600
Working Days & Hours: Mon-fri office hrs

Location: Boon Lay

Job Description:
Perform inspections on raw materials, intermediates and finished products by conduct sensory evaluation, carry out physical, analytical tests to ensure compliance with specifications and standards.

• Perform basic checks, calibration and maintenance of test equipment to ensure that test results are accurate.
• Assist and support in non-conformance and investigations of customers’ complaint samples or rejected items (Internal & External).
• Issue various documents (TDS, COA) internally (e.g. inter-department, affiliates) or externally (e.g by customers).
• Responsible for data entry, clerical and admin support.
• Maintain housekeeping of QC laboratory to ensure a clean and safe working environment.
• Assist and support in the implementation of continuous improvements in QA/QC functions.
• Carry out ad-hoc duties as assigned, when and where necessary.

Job Requirements: Min Diploma in Life Sciences or similar

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Responsibilities:

• Department Management: Oversee the finance, HR, and admin departments and provide leadership and support to the team.
• Financial Reporting: Prepare financial reports, analyze performance, and provide insights to management.
• Budgeting & Forecasting: Lead the budgeting process and monitor budget vs. actual performance.
• Cash Flow Management: Ensure effective cash flow management and implement strategies for cash optimization.
• Inventory & Costing: Oversee inventory management and control costs across the business.
• GST & Audit: Ensure accurate GST submissions and coordinate audit reporting.
• Grant Applications: Manage the preparation and submission of grant applications.

Requirements:

• Minimum Degree
• At least 5 years of relevant experience
• Must have manufacturing background

Kindly email your resume in a comprehensive Word format to [email protected]

We regret to inform that only shortlisted candidates will be notified.

Please be informed that by applying for the advertised position, the candidate is considered to have given their consent for us to collect, utilize, or disclose their personal information for the purposes related to the services we provide.

Jacqueline Goh

EA License Number: 22C1430

Registration Number: R1326664

Exciting opportunity for a hands-on professional preferably in laser technology products to join an established company as a Manufacturing Engineer to help develop, evaluate and improve manufacturing methods and processes for the purpose of sustaining the manufacture of existing Laser products as well as the introduction of new products.

Role

· Provide day-to-day technical support for the production line including cleanroom, sub-assembly, optical build, and laser final test areas:

· Maintain quality, reliability, and cycle time standards of the current laser build process.

· Continuously improve current production methods using knowledge of product design, materials and parts, fabrication processes, tooling, production equipment capabilities, quality control standards, and warranty metrics.

· Take responsibility for electronic travelers, assembly and process methods, and bills of materials.

· Work with quality, reliability, and supply chain teams to improve product performance.

· Implement corrective actions for problems reported by our customer.

· Works on complex problems where analysis of situations or data requires an in-depth evaluation of various factors.

Requirements

· Bachelor’s degree in engineering (BEng) or its equivalents with at least 3 to 5 years of relevant work experience in Photonics or a related manufacturing field

· Possess technical expertise pertaining to Manufacturing, Assembly & Test Processes for mechanical assemblies, PCBA and optical components.

· Strong problem-solving skills and excellent knowledge in Six Sigma DMAIC approach, Lean principles, DOE, SPC, FMEA, GR&R and other quality improvement tools.

· Certified Six Sigma Green or Black Belt will be an advantage

· Excellent interpersonal skills with good verbal and written communication skills.

· Self-directed and able to work independently with little or no direct supervision.

Interested applicants, please submit your profile to [email protected]for review. We will be in touch for initial discussion upon being shortlisted

EA Licence: 17S8795 | EAP: R1108333

Job Responsibilities:

• SKU Management: Handle and maintain a large volume of Stock Keeping Units (SKUs).
  Ensure accurate labeling, tracking, and inventory updates.
  Prepare SKU reports and maintain data integrity within ERP systems.
  
• Administrative Support: Perform general administrative tasks such as data entry, document preparation, and record keeping.
  Support internal and external communication related to inventory, planning, and purchasing.
  
• Planning: Coordinate production schedules based on client orders and inventory levels.
  Work with production and supply chain teams to plan resource allocation effectively.
  Monitor and adjust schedules to meet demand fluctuations and lead times.
  
• Purchasing: Assist in procurement processes, including sourcing, vendor communication, and purchase order creation.
  Track delivery schedules and ensure timely availability of raw materials and components.
  Evaluate vendor performance and ensure compliance with quality standards.

Requirements:

1. 2+ years in a coordination role, preferably within electronics manufacturing.
2. Familiarity with handling high SKU volumes and multi-departmental coordination.
3. Strong proficiency in inventory management systems, ERP tools (e.g., SAP, Oracle), and Microsoft Office.

HOW TO APPLY:

Interested applicants, kindly send your resume to [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Mason & Co is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Mason & Co Pte Ltd

EA License No: 19C9622

EA Personnel: Cheah Wei Xuan (Thea)

EA Personnel Reg No: R23118878

Our client is a leading player in Manufacturing industry. Due to business needs, they are now recruiting a Logistics Coordinator to be part of their Logistics Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of Logistics Coordinator:

• Ensure accurate and timely documentation for all incoming and outgoing shipments.
• Update and maintain material movement records in the system and ensure inventory accuracy.
• Collaborate with warehouse and internal departments to align on requirements and priorities.
• Perform timely transactions in the SAP system and archive all related documents.
• Manage the purchase of indirect materials and generate weekly/monthly stock count sheets.
• Liaise with freight forwarders, arrange local deliveries, and handle RMA documentation.
• Maintain departmental safety and cleanliness standards.
• Contribute to process improvement initiatives and perform additional duties as assigned by the Logistics Manager.

Requirements:

• Relevant logistics experience

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

• MNC Company
• Basic $4500 - $6000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Company Transport Provided)
• Working day: Monday to Friday
• Working hours: 8am to 4.30pm

Job Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our client is a Manufacturing MNC. Due to business needs, they are now recruiting a Sales Coordinator to be part of their Sales Team for ongoing transformation projects. They are located in the West - easily accessible.

Duties of Sales Coordinator:

• Accurately process sales orders in the system, ensuring correct product details, pricing, and customer information.
• Prepare and maintain sales documents, including quotations, invoices, contracts, and sales reports.
• Assist the sales team in preparing presentations, proposals, and any other necessary documents.

Requirements:

• Relevant experience
• Experience with SAP or ERP System

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

• Working Days: Monday – Friday
• Working Hours: 08:00am - 05 :00pm
• Location: Taman Jurong
• Salary: $2,700 - $3,000 + $90 Transport Allowance

Responsibilities

• Brand promo activities/packaging artworks editing, managing advertising and promotion
• Support as in house designer for urgent packaging editing/new POSMs creation etc
• Website maintenance/editing (ensuring website information is up to date)
• To support in development and planning of new products with the mission of taking a product from concept to commercialization
• To support ad hoc marketing activities whenever possible.

Requirements

• Relevant Experience in the same capacity
• Knowledge on using illustrator/photoshops for design of artworks/POSMs/editing package
• Social media knowledge/experience will be added advantage

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Our client is a global manufacturer. Due to business needs, they are now recruiting a FP&A Accountant to be part of their FP&A team for ongoing transformation projects. They are located in the North Area - easily accessible.

Responsibility:

• Coordinate the preparation, compilation, and analysis of the Annual Budget prior to its submission to the corporate office.
• Analyze financial variances and take a proactive approach by conducting meetings with operations departments to review and discuss monthly forecast performance.
• Synthesize complex data from various sources and transform it into comprehensive management reports.
• Scrutinize a wide range of records and engage with various departments to ensure data accuracy and reliability.
• Oversee SOX compliance and address internal and external audit queries.
• Enhance processes and actively participate in ad-hoc LEAN projects.

Requirements:

• Min Degree in Finance / Accountancy or any related field
• Minimum 5 years experience in FP&A and SOX
• Experience in manufacturing industry is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Job Description:

• Technical transfer product/project in assembly and testing, and from customers
• Provide technical support in manufacturing and testing in product build
• Provide technical support to QC in RMA issue
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit

Job Requirements:

• Minimum Diploma in Electronics Engineering
• At least 2 years of relevant work experience in Electronics Manufacturing industry
• Technical competent to handle product/project manufacturing, transfers and troubleshooting Experience in product/project, manufacturing and testing
• Able to liaise with customers on technical matters
• Experience in manufacturing environment with ISO13485 & FDA will be advantageous
• Good communication and problem-solving skills
• Medical product experience and Quality Management System exposure preferred

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845

Our client is a Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quotation Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Review and comprehend technical requirements outlined in customer tender documents.
• Coordinate with internal teams to collect essential data for proposal development.
• Provide technical expertise during tendering and quotation processes/activities and support the sales and marketing team with relevant engineering insights.
• Prepare cost breakdowns and delivery schedules to assist the sales and proposals team in responding to inquiries.
• Draft and compile technical documentation, such as datasheets, proposal designs, clarification notes, and responses to tender specifications.
• All other ad-hoc duties as assigned.

Requirements

• Min Degree in Relevant Qualification in Engineering or equivalent.
• Min 5 years relevant working experience.
• Proficient in Microsoft Office and CAD software.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Job Description:

• Develop new business opportunities & sales leads for revenue growth and customer retention.
• Achieve sales targets and analyst current market trends and industry information.
• Pitch, recommend and fulfil the requirement of customer in terms of products and services offered
• Work closely with the production, application and shipping team to ensure timely delivery and that all order requirements are met.
• Attend problem and generate solution

Job Requirements:

• Minimum Diploma in Mechanical Engineering or equivalent.
• Strong drive and initiative with ability to work independently
• With relevant sales experience in Precision Engineering related Products.
• Proven sales and customer care track record.
• Strong technical knowledge in CNC machining and CMM basic inspection.
• Good presentation and communication skill.

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845

Our client is in is the automation industry, transforming the cleaning industry with advanced robotic solutions that tackle manpower challenges. Their innovative robots are already making a difference in 30 countries. As they continue to grow, they are seeking a Production Supervisor to join their team.

Key Responsibilities:

Supervision of Production Activities:

• Oversee daily production operations, ensuring that production schedules are met while maintaining high-quality standards.
• Coordinate and monitor the workflow on the production floor, making adjustments as necessary to optimize efficiency.

Team Leadership:

• Lead, mentor, and train production staff, fostering a positive and productive work environment.
• Conduct performance evaluations and provide constructive feedback to team members.

Quality Assurance:

• Implement and enforce quality control procedures to ensure that products meet established specifications.
• Address any quality issues promptly and implement corrective actions as necessary.

Safety and Compliance:

• Ensure compliance with safety regulations and company policies, promoting a culture of safety on the production floor.
• Conduct regular safety audits and training sessions to maintain a safe working environment.

Process Improvement:

• Identify areas for process improvement and efficiency gains, implementing best practices in production operations.
• Collaborate with management to develop and execute strategies for enhancing productivity and reducing waste.

Reporting and Documentation:

• Maintain accurate production records, including output, downtime, and quality metrics.
• Prepare and present regular reports on production performance to management.

Requirements:

• Bachelors degree in Engineering, Manufacturing, Business Administration, or a related field preferred; relevant work experience may be considered in lieu of a degree.
• A minimum of 3-5 years of experience in a production supervisory role, preferably in a manufacturing environment.
• Strong leadership skills with the ability to motivate and manage a diverse team.
• Excellent problem-solving abilities and a proactive approach to challenges.
• Familiarity with production management software and quality control methodologies.
• Strong communication and interpersonal skills.

Interested candidates are invited to send in your Resume in MS Word Format stating your past work experience, reasons for each leave, past and expected remuneration.

We regret to inform that only shortlisted candidates will be notified.

By submitting an application to us, you will be deemed to have agreed for us to collect, use, and disclose your personal data which you have submitted to your prospective employers, for the purpose of job search, and/or other services which you have consented us to perform on your behalf.

Cultivar Asia Pte Ltd

EA License Number: 19C9782

EA Personnel Number: R1326341 Ng Zhenyu