KEY DUTIES AND RESPONSIBILITES:

· Perform various activities and tasks required in the tablet and capsule final packing equipment.

· Operate all relevant equipment, clean, assemble and maintain the cleanliness of the equipment.

· Perform and maintain the documentation of operations in accordance with cGMP requirement.

· Operate the equipment appropriately in accordance with Standard Operating Procedure / batch document.

· Perform online monitoring of in process parameters / checks throughout the batch.

· Complete all relevant records and other documentation required for packing and related equipment in the work area.

· Perform all activities in accordance with cGMP.

· Maintain the cleanliness of work area to ensure cGMP compliance.

· Perform all other relevant duties required to meet the schedule.

· Check relevant material and product details against batch document.

· Co-ordination with Engineering for break down rectification of both primary and secondary packing lines

· Involve in equipment / process qualification.

· Participate in investigation of process deviation, cGMP and all other compliance related matters, where applicable.

· Ensure compliance with GxP / Safety / Quality policies.

REQUIREMENT

· Good understanding of safe working practices and cGMP.

· Experience in bottle or blister oral solid dosage packing is preferred.

· A good team player with a positive learning attitude.

· Willing to work in Tuas area, in cleanroom environment with full gowning.

EDUCATION & EXPERIENCE

· Minimum GCE 'O' level or NITEC or Higher NITEC or Diploma in Biotechnology / Biomedical / Mechanical / Mechatronics Engineering or relevant disciplines

· With 2-5 years of manufacturing experience in Pharmaceutical or related industries.

· Entry level NITEC / Higher NITEC / Diploma candidates are welcome to apply.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Reporting to: Manufacturing Supervisor

Roles & Responsibilities

• Operate assigned processing and/or packaging equipment according to the SOP, guides and manual
• Render correct cleaning and sanitation of processing equipment following Good Manufacturing practices
• Conduct checking and inspection of materials to ensure it meets specifications for processing and production of salts and dry part concentrates
• Prepare raw materials according to the plan and quality specifications
• Move raw materials and batch concentrate from staging area to processing area. This may require driving forktrucks and/or motorized and manual pallet stacker
• Perform product and packaged change over
• Perform SAP applications for transacting process order, good receipt and inventory
• Operate the system manually or with the aid of basic process automation
• Follow safe operation of dust collection system along with other Safety precautions and Safety criteria
• Perform Basic Equipment Care, troubleshooting and maintenance of the assigned machine to minimize inefficiency
• Perform 5S, routine cleaning for responsible areas
• Practice and adhere to current Good Manufacturing Practices (GMP), OE Eight (8) wastes and Continuous improvement (Kaizen) culture
• Perform Visual Management Board update, recording and documentation and maintenance of necessary operational records
• Ensure compliance with the Health and Safety Site System and ensure that a high standard of Health and Safety is always adhered to on site
• Any other ad Hoc duties and projects as assigned

Requirements

• Understanding of English Language, both written & spoken
• Ability to communicate effectively with all team members
• NITEC Certification or equivalent preferred
• Minimum 3 years of technical experience in F&B industry would be preferred
• Basic working knowledge in the production operations

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Key Responsibilities

• Monitor employee performance, provide feedback, and conduct performance evaluations.

• Implement and enforce safety protocols to maintain a safe working environment.

• Conduct emergency response drills.

• Train new employees on production processes, safety procedures, and equipment operation.

• Conduct regular safety inspections and risk assessments of the workplace to identify potential hazards and recommend corrective actions.

• Investigate workplace accidents, injuries, or near-misses. Document findings, recommend corrective actions, and work to prevent recurrence.

• Monitor production processes to ensure products meet quality standards and specifications.

• Maintain detailed records of safety inspections, incident reports, training sessions, and regulatory compliance to present to management or regulatory bodies when needed.

• Identify opportunities for process optimization and efficiency improvements.

•Minimum of 3 - 5 years of experience in construction.

Additional Information

Career Level : Senior Executive

Qualification : Diploma or equivalent required

Years of Experience : 3-5 years above

Job Type : Full-Time

Job Description

• Data entry
• Preparation of reports
• Providing administration support to QC

Job Requirements

1. Have admin or assistant experience advantageous
2. Excellent time management skills and ability to multi-task and prioritize work
3. Attention to detail and problem solving skills
4. Excellent written and verbal communication skills
5. Strong organizational and planning skills
6. Proficient in MS Office

With 1500 employees worldwide, a Swiss company BAUMANN Springs (www.baumann-group.com) established in 1886 is a leader in the world of Springs, Stampings and Solutions. Running with the 5th Generation in place and our guiding principles of Time, Together and Inspiration, our employees Care, Compete, Learn and Celebrate universally.

With the growing requirements of our major customers, our presence in Asia was established as early as 1979. Within the site in Singapore, the strength of 100 dedicated, diligent and focused employees exploits the know-how acquired over the decades to manufacture and develop custom-made products and technologies. Strong partnerships are established with international customers in key industries of Automotive, Industrial and Medical. An opportunity arises and BAUMANN Springs in Singapore is currently looking for:

Career Opportunity for a Production MANAGER

Able to lead and contribute to achieve organization’s goal towards excellence and advancement. We want someone with the ability to communicate effectively, dedicated, passionate with a positive attitude to inspire and create followers. If you possess strong analytical ability, is creative and confident, we want you.

Responsibilities:

The Production Manager will take the lead in ensuring production, including the development of procedures and knowledge transfer to the operations team

· Report to the Plant Manager, fully responsible for the customized products, varieties and operations of the

customized manufacturing process.

· Responsible for the production system planning and management - planning, formulating and implementing

process strategies, roadmaps, and updating iteration plans

· Responsible for data analysis and promote data exchange between the entire supply chain including quality and

safety.

· Responsible for coordination and communication with the sales and engineering team on the process from

design, development to launch, and promote the achievement of product goals

· Cooperate with the logistics department to ensure that all deliveries are met promptly according to

commitments to customers.

· Work closely with the Sales and engineering team, involve in business planning strategies

· Responsible for ensuring the core personnel of each process are in place and carry out as per process flow and

product specification.

· Other tasks within the scope of responsibility

Requirements:

· Degree or a good Diploma in an engineering discipline, or equivalent

· More than 8 years of experience in Operation and management

· Mandatory to have interest and strong operational and executional experience

· Understand industrial trends, rules, and business logic and I4.0

· Have a keen sense of commitment

· Strong analytical skills, problem solving skills, critical thinking

· Strong business acumen, be customer focused, team and results-oriented

· Able to read drawings and industrial application material science

- Experience with ISO 9001/ IATF 16949/ ISO 13485 and QA system added advantage

Work location:

Located in the Tuas Area – Gul Lane

5 days’ work week

Interested candidates, email resumes in MICROSOFT WORD format, stating current, expected salary, date of availability and reason for leaving current employment to:

[email protected]

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

1 year contract through employment agency payroll

If you are a Singaporean with at least a Diploma in IT, good hands on experience with SQL and Linux, and are able to work shift hours (including nights, weekends, and public holidays), with an expected salary of up to $4200, feel free to apply

This role involves supporting the Development team, ensuring app runs smoothly, conduct health checks, recovery and other related tasks

Requirement:

• Singaporean
• Must have Intermediate knowledge and good hands on experiences using SQL and basic in Linux
• Must be able to commit to working shift hours, even on night shift, weekends and public holidays
• Need to pass Hackerrank assessment and demonstrate proficiency in SQL and Linux during the technical interview
• Diploma / Degree in IT or Computer Science
• At least 1 year working experience in IT
• Need to have eagerness to learn and perform with commitment
• Willing to serve 2 months notice if join to work in this project

Work Location: Changi Business Park
Monthly salary inclusive of allowance: $3300 to $4200 (company does not offer bonus)

Below is the Shift Timing (Working 5 days a week, involves rotating shift and support including night shift, weekends and public holidays)

• Morning shift: 6am to 3pm
• General shift: 9am to 6pm
• Afternoon shift: 2pm to 11pm
• Night shift: 10pm to 7am

Transport is claimable - before 7am (for morning shift 6am to 3pm), after 11pm (afternoon shift 2pm to 11pm)

Junior L2 Production Support (Java-base)

• Experience in Unix commands, SQL queries
• Recent experience in working with Java J2EE applications
• Experience in application support role for min 1 years for support or Developers willing to learn with good knowledge of Java, Unix, SQL
• Experience in programming languages such as JAVA/J2EE.
• Knowledge of web applications, batch jobs, JBOSS, MariaDB, SQL, Shell
• Knowledge of Job scheduling, MQ setup, C:D setup experience is a plus
• Exposure to banking industry is a plus
• Dynamic individual with thirst to learn
• Strong team player with excellent inter-personal skills
• Ownership oriented and ability to meet SLAs with no compromise on the quality of the work

Basic start $2600, after 3 months confirmation is $2700. Have OT pay.

Industry: Engineering

Located at Chai Chee

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Perform, document internal audits and other quality assurance activities to ensure readiness on international standards certification audits and GMP inspection.
• Create, review work instructions and standard operating procedures, devise sampling procedures and directions for recording and reporting quality data.
• Communicating with other team members to solve problems.
• Conduct / perform training to employees to improve GMP / international standards certification awareness and compliance.
• Other duties as and when assigned by management.

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Basic start $2600, after 3 months confirmation is $2700. Have OT pay.

Industry: Engineering

Located at Chai Chee

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Perform, document internal audits and other quality assurance activities to ensure readiness on international standards certification audits and GMP inspection.
• Create, review work instructions and standard operating procedures, devise sampling procedures and directions for recording and reporting quality data.
• Communicating with other team members to solve problems.
• Conduct / perform training to employees to improve GMP / international standards certification awareness and compliance.
• Other duties as and when assigned by management.

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Administered by the Workforce Advancement Federation (WAF), the Career Conversion Programme (CCP) for Biomedical Manufacturing Executives is a premier talent development initiative designed to cultivate the next generation of skilled professionals for Singapore’s Biomedical manufacturing industry. This comprehensive 15-month programme features structured on-the-job training (OJT) provided at Novartis Singapore Pharmaceutical Manufacturing Pte Ltd (NSPM), facilitating the practical application of acquired knowledge and ensuring participants develop the essential competencies required for their roles.

Eligilibity for CCP:

• Singapore Citizen or Permanent Resident;

• Minimum 21 years old;

• Mid-Career Individual: Graduated, or completed National Service, whichever is later, for at least 2 years* prior at the point of application; or

• Fresh Graduate: Graduated, or completed National Service, whichever is later;

• Not in a similar job function prior to joining Career Conversion Programme (CCP);

• Have not attended the same programme – Career Conversion Programme (CCP) for Biomedical Manufacturing Executives / Professionals (Train-and-Place with Commitment to hire) – previously;

• Have not been funded under the same programme – Career Conversion Programme (CCP) for Biomedical Manufacturing Executives / Professionals (Train-and-Place with Commitment to hire) – previously.

• Should not be shareholders, immediate ex-employees of Novartis, or be related to shareholders of Novartis.

Successful candidates must be able to commence the program by March 2025.

Job Purpose

Responsible for providing quality oversight to ensure smooth manufacturing operation and new product launches/transfer in a compliant and timely manner. Support drug substance batch review and release in full gmp compliance to regulatory standards and ensures quality strategy/continuous improvement are executed in alignment to site objective/s.

Key Responsibilities

Operational

a. Provide Quality oversight to site operations/objectives

· Oversight of all production and testing activities, ensures compliance with cGxP, incl. data integrity and eCompliance.

· Participate/Support meetings (as required) and team tiered process to monitor/detect/act on anomalies to key site quality KPIs and continuous improvement.

b. Review/ Release of Raw materials and manufactured materials

· Perform and be responsible in ensuring Batch record review and/or release (raw materials and manufactured materials – for authorized person only) is in full cGMP compliance to regulatory and Novartis Quality Standards

· Support the release team in batch release in ensuring batch release (manufactured materials – for authorized person only) is in full cGMP compliance to regulatory and Novartis Quality Standards.

c. Support exception investigations and change control activities

· Lead/support in ensuring a smooth manufacturing operations in production/QC/Logistics, in handling deviations/capa, change control, complaints, customer management, escalation, recall etc are in full cGMP compliance to regulatory and Novartis Quality Standards

d. Support OpEx improvement projects

· Support for end-to-end lifecycle management, timely review & escalation, stakeholder management to achieve agreed outcomes for projects assigned and areas under responsibility

e. New Product Introduction

· Support in ensuring success to new product launch/transfer and equipment/product lifecycle management are in full cGMP compliance to regulatory and Novartis Quality Standards e.g., Product Transfer, Equipment Qualification, Computerized System Validation, Shipping Validation, Cleaning Validation, , Process Validation, Ongoing Process Verification & etc

f. Customer Management

· Lead/support network/project governance meeting and team tiered process to monitor/detect/act on anomalies to project milestones, KPIs and continuous improvement.

· Support in preparing customers request documentation or requests

g. Documents review

· Provide support (Review/Approval) of GMP Record/Document in ensuring compliance to regulatory and Novartis Quality Standards

h. Inspections

· Provide support in ensuring inspection readiness. Support customer, internal Novartis and Health Authority audits.

i. Any other task/duties assigned by Line Manager

Requirements

· University degree with a scientific / technological background (e.g. Chemistry, Pharmacy, Biology, Biochemistry, or equivalent)

· Several years of experience in pharmaceutical quality control, quality assurance or production or relevant quality experience. Fresh graduates are welcome to apply.

· Operations Management and Execution; Functional Breadth; Collaborating across boundaries; Applied Practice

· New entrants to biopharmaceutical industry and should not be holding a bond obligation with any organisation

Abbott is a global healthcare leader, creating breakthrough science to improve people’s health. We’re always looking towards the future, anticipating changes in medical science and technology.

Primary Function:

• Perform administrative support and secretarial duties for a department or group.
• Create shopping carts, administer and perform goods receipt and resolving invoice deviations.
• Prepare correspondence, presentations and reports.
• Compose routine correspondence.
• Maintain confidential records and information.

Responsibilities:

• Screens telephone calls and visitors, and resolves inquiries and requests.
• Schedules and maintains calendar of appointments, meetings and travel itineraries, and coordinate related arrangements.
• Tracks operational data in a database, including financial and other reporting metrics.
• Uses software tools to compile data into presentation format.
• Maintains accurate schedule of activities of the executive(s) supported, including complex meeting coordination and extensive travel arrangements.
• Independently prepare presentations and recurring reports.
• Prepares and manages correspondences and collation of reports/documents to meet business timeline.
• Organizes a variety of local meetings, corporate events as and when called upon.
• Maintain a systematic filing system.
• Any other duties as assigned by supervisor.

Requirements:

• Diploma in related discipline or GCE "O" with minimum 3 years of experience.
• Minimum 1 year of relevant experience in an administrative role (e.g. team/department admin)
• Proficient with Microsoft Office required
• Experienced in handling customer visits with great confidence.
• Experience using CTE for travel desk support, travel claims or SAP for purchasing is advantageous

*Kindly note this position is based in Tuas.

Follow your career aspirations to Abbott for diverse opportunities with a company that can help you build your future and live your best life. Abbott is an Equal Opportunity Employer, committed to employee diversity.

Administered by the Workforce Advancement Federation (WAF), the Career Conversion Programme (CCP) for Biomedical Manufacturing Executives is a premier talent development initiative designed to cultivate the next generation of skilled professionals for Singapore’s Biomedical manufacturing industry. This comprehensive 15-month programme features structured on-the-job training (OJT) provided at Novartis Singapore Pharmaceutical Manufacturing Pte Ltd (NSPM), facilitating the practical application of acquired knowledge and ensuring participants develop the essential competencies required for their roles.

Eligilibity for CCP:

• Singapore Citizen or Permanent Resident;

• Minimum 21 years old;

• Mid-Career Individual: Graduated, or completed National Service, whichever is later, for at least 2 years* prior at the point of application; or

• Fresh Graduate: Graduated, or completed National Service, whichever is later;

• Not in a similar job function prior to joining Career Conversion Programme (CCP);

• Have not attended the same programme – Career Conversion Programme (CCP) for Biomedical Manufacturing Executives / Professionals (Train-and-Place with Commitment to hire) – previously;

• Have not been funded under the same programme – Career Conversion Programme (CCP) for Biomedical Manufacturing Executives / Professionals (Train-and-Place with Commitment to hire) – previously.

• Should not be shareholders, immediate ex-employees of Novartis, or be related to shareholders of Novartis.

Successful candidates must be able to commence the program by March 2025.

Job Purpose

Support all activities establishing and maintaining Microbiology lab in BioProduction Operations QC. Ensure all microbiological testing of samples for production support and documented in accordance with written testing SOP’s and in accordance with local and/or international regulations.

Key Responsibilities

• Maintain QC Micro/EM laboratory in full cGMP-compliance.

• Track and execute individual training requirements to ensure completion on time including new methods and instrumentation.

• Ensure laboratory operations are in accordance to cGMP standards

• Perform microbiological testing and EM sampling in accordance current testing monographs/SOPs and in accordance with local/ international regulations.

• Ensures that testing completed in a timely manner based on plan.

• Support laboratory routine operations such as inventory management and house-keepings.

• Support the optimization of work flows in the QC Micro/EM Laboratory.

Requirements

•Minimum Diploma with 4 to 5 years of relevant working experience, preferably in a cGMP environment. Fresh graduates are welcome to apply.

• New entrants to biopharmaceutical industry and should not be holding a bond obligation with any organisation

• Related experience should be in GMP-regulated industries in Quality Control

• Background knowledge on analysis such as Bioburden and Endotoxin testing

• Preferrably a working knowledge of FDA and ex-USA regulatory requirements as well as industry quality management tools, standard, and quality systems.

* Focused on Cost Accounting procedures in Product Costing and Entity Accounting.

* Participate in month-end close process - utility accrual calculation, payroll analystis, headcount reporting and division financial review decks

* Comparing to benchmarks and determining Utilities price / volume / efficiency metrics

* Maintain Management Operating System (MOS) board by updating metrics for Finance department

* Give presentations monthly at Tier 4 Meetings on month-end results

* Bill of materials cost creation and release of standards in SAP

* Forecasting : Utilities usage (Natural gas, electricity) and overtime/payroll

* Ownership of utilities and payroll quarterly latest best estimates (LBE) and Plan Forecast for the next year

* Write and update manuals for each working process

Requirements :

Degree in Finance or equivalent

At least 1 year of finance experience in a large MNC preferred

Job Responsibilities:

· Responsible for all dispensing operation for materials to be used in Production, including to provide timely report to Production Manager,

· Responsible for the management of controlled substances/controlled drugs and inventory, ensuring compliance with regulatory requirements and organizational policies.

· Under Production Manager supervision and direction to manage operational training and development of manpower in production, and ensure relevant SOP update to date.

· To assist the Manager to plan, record and monitor the Production manpower headcount in accordance to employment matrix including proposing replacement and additional manpower

· Together with other team member to assist production manager in operational workforce management and engagement, and well-being.

· Together with production executive to conduct safety relevant training, to promote GMP compliance, and to support GMP audit, Project, etc under manager supervision and direction.

· Together with team member to support GMP inspection by authority or customers

· Other duties/projects assigned by the Production Manager.

• To ensure that all operational duties by the team are completed on a daily schedule, ahead of time, efficiently and effectively
• To provide excellent customer service and management and to ensure that all your staff understands the importance of such standards
• Ensure smooth day-to-day operation of the team
• Obtain sales target and KPIs given by the management
• Assist in planning schedule
• Promote positive work environment
• Ensuring compliance with licensing, hygiene and health and safety legislation/guideline
• Develop strategic and operational plans for managing execution and measuring results
• Any other duties as may be assigned by management
• Able to work night shift and split shift
• Able to work OT on weekends and public holiday
• Must be able to work night shift or split shift
• Must be able to work extra hours or weekend if needed
• · Must be able to work night shift and split shift
• · Must be able to work extra hours or weekend if needed

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

1. To assist Production Manager on production planning and implementation

2. To take charge of the essential oil production section to meet production targets

3. To upkeep production equipment with regular maintenance plan

4. To liaise with Shipping Department on local & overseas delivery arrangements

5. To maintain ISO 9001’s QMS, SOPs, and related documents

6. To conduct Internal Quality Audit, and liaise with external ISO auditors

7. Any other administrative duties as assigned by Production Manager

Requirements:

1. Diploma/ITE/O level

2. Minimum 1~2 year experience

3. Positive working attitude with good interpersonal skills and matured personality

4. Meticulous and ability to work independently

5. Good PC knowledge and proficient in the use of Words, Excel, and Powerpoint

6. Bilingual in English and Mandarin to liaise with associate

Five and a half working days from 8.00 am to 5.30 pm during weekday and 8.00am to 12.00pm on Saturday.

Take bus number 79 or 246 from Boon Lay MRT (10 minutes bus journey)

We thank all applicants for their interest - please note that only shortlisted candidates will be notified.

• With general autonomy, the Mfg Production Planning Mgr will be responsible for balancing the Manufacturing capacity plan and scheduling against the PSL demand
• Manages the local MFG master planners to establish local manufacturing strategies in one or more MFG Plants
• Works with Global PML to establish improved planning practices as they relate from Field to MFG
• Defines and coordinates manufacturing planning strategy with field operations
• Liaises with Strategic Sourcing for long-term regional sourcing requirements
• Reviews potential external manufacturing alternatives for meeting supply requirements
• Conducts regular materials reviews with Product Service Line (PSL), Manufacturing, and Procurement
• Job role is responsible for measurable assets such as a department budget and staff of 3-15

Requirements:

Completion of an undergraduate degree in Business, Engineering, Operations Research and minimum of 10 years of experience in manufacturing, materials or operations planning which includes experience and knowledge of detailed product and Company operations knowledge and general knowledge of master planning, inventory management and materials requirements planning.

Roles & Responsibilities

Responsibilities:

• Able to take measurement on site and sketch the drawing accordingly to the site requirements
• Use AutoCAD to create technical drawings within the time frame
• Prepare drawing and calculations for submission
• Maintain drawing records and report
• Perform other duties or tasks as assigned

Requirements:

• Fresh graduates are welcome to apply. Training will be provided.
• Proficiency with AutoCAD

• Preparation and management of project documentation such as test request and delivery orders;
• Management of inventory entries and project materials tracking;
• Prepare reports for inventory and production;
• Overseeing production progress based on goods delivery documentation;
• Preparation of monthly progress claims, quotations and documentations to justify project claims;
• Takeoff material quantity for on-going projects and tenders based on drawings;
• Assistance in ISO audit paperwork
• Ad-hoc tasks assigned by management

Responsibilities:

• Manning the production machines and output
• Willing to work OT and shift work
• Able to perform simple recording of data

Requirements:

• Minimum GCE O Level
• Minimum 2 years of work experience in Manufacturing industry
• Other tasks and duties as and when assigned by Superior
• To perform other duties as and when assigned by Group Leader

Job Description

Prepare and pack high-quality cuts of meats according to customer specifications using company standards and adhering to all safety requirements.

The majority of time will be spent operating processing equipment.

Operation of Meat Processing Equipment

Pack, trim, and customize portions of meat products using knives, or other meat production equipment.

Count and stack on tray portions per customer and company specifications

Label portion with a supplied number of product labels

Set up packing and labeling area as required

Perform end-of-day functions

Actively maintain, and merchandise partial cart

Keep the packing area, cutting room, and surrounding area clean and sanitized.

Follow company GMP (Good Manufacturing Practices) to maintain sanitary conditions

Work rotating shift

Physical Requirements

• Lift up to 30 lbs. regularly, including overhead lifting, and up to 60 lbs. occasionally. Push/pull up to 40 lbs. regularly.

• Meet established volume/activity standards.

• Stand or walk 100% of the time.

• Frequent reaching, grasping, and lifting individual stock items below waist level or above shoulder level.

• Frequent bending, kneeling, and squatting.

• Able to handle a variety of substances associated with cleaning materials, packaging materials, and food products.

• Tolerate working in extremely cold temperatures -18 °C – 10 °C

• Ability to use computers, calculators, and communication systems required to perform the job functions.

Kindly send in your full resume with your expected salary & earliest start work date.

We regret that only shortlisted candidates will be notified. Thank You.

Ruby Ng

R1106066

This role offers the opportunity to guide and design digital transformation projects as a trusted advisor and consultant to our clients in manufacturing and various industries. The job involves identification of business cases for digital solutions, developing transformation plans, and drive the sequence of events towards completion of client buying process. The ideal candidate should be able to engage with client senior management with confidence and elevate the brand image of Yokogawa as trusted partner to our customers.

Responsibilities

• Engage with client senior management to identify gaps and value creation opportunities which could be addressed by Yokogawa Digital Enterprise Solutions Portfolios of products and services.
• Lead and facilitate smart manufacturing (Industry 4.0) assessment program workshops using independent frameworks such as Smart Industry Readiness Index (SIRI) and relevant Functional Area Assessment methodologies developed by Yokogawa.
• Create digital transformation roadmaps following these assessments, and to support proposal and delivery team to defining scope, spend budget and timelines prior to presentation to the client.
• Develop engaging and succinct presentations to clients independently or with the support of Subject Matters Experts.
• Collaborate with client or Yokogawa field sales to justify the project and to initiate a sequence of events that will lead to the completion of the buying process.
• Developing sales pipeline for Operations Management and Control of Work Solutions in YEA regions by driving the go to market strategies, in collaborations with Yokogawa’s established sales teams.
• Ultimately this role will contribute to expansion of Yokogawa market share in new solutions area and/or new customer base, measured by pipeline quality and order intake

Requirements

• Minimum 8 years of working experiences in manufacturing environment on digital transformation, industry 4.0, IoT or automation.
• Bachelor's Degree in Engineering (eg, Mechanical, Electrical, Industrial) , Manufacturing, or any related field.
• Experienced in facilitating discussions with client’s senior management levels and deliver formal presentations.
• Ability to assess customer’s operational challenge, clearly explain the problems on hand, formulate a solution and define a deliverable scope.
• Proven track record of success in driving revenue growth and closing deals.
• Experience with scoping and deploying OT and IT digital solutions for a variety of manufacturing environments.
• Thorough understanding of Industry 4.0 principles and technology across energy & sustainability, material, and life industries.
• Good understanding of OT/IT architectures and digital applications in process industry.
• Excellent verbal and written and presentation skills.

We regret to inform that only shortlisted candidates will be notified.

By responding to Yokogawa’s advertisement, consent is considered given to Yokogawa to collect the required personal data for the purpose of recruitment with expectation that Yokogawa will protect personal data with security safeguards that are reasonable and appropriate to the sensitivity of the personal data, to protect it from unauthorized access, use or disclosure and complies with applicable regulatory requirements with respect to the retention of personal data.