The Process Engineer will be based in Changi South reporting to Engineering section Lead.

In charge of process-engineering capabilities focused on cost, quality, and delivery improvements to hold up a manufacturing organization to build state of the art semiconductor equipment's.

Job Responsibilities

• Recognize the manufacturing process, technologies, techniques, and the product.
• Define, implement, and evaluate proposed designs and processes for manufacturability.
• Have the capability to singly or with other engineering stakeholders identify root causes of failures in the manufacturing process.
• High level participation in daily production activities and effective problem solving on daily issues.
• Prepare justification, purchase and implement capital equipment for production.
• Hold up and oversee new process equipment production.
• Hold up the raising and introduction of engineering change orders (ECOs).
• Establish robust, repeatable, and reproducible process parameters.
• Develop, implement, and take ownership of process control methodologies.
• Trouble shoot process related issues.
• Participate in activities pertaining to cycle time and process improvements.
• Evaluate and select various engineered materials.
• Implement statistical process research on new and existing products.
• Implement safety, productivity and give in improvements.
• Improve manufacturing techniques and throughput.
• Provide continuous development of manufacturing techniques that will improve in-house capabilities and gives in.
• Develop and maintain process documentation.
• Review processing methods.
• Interface with production of all activities associated with new process implementation and transfer.
• Assist in the development of training and provide training to production personnel during innovative technology transfer.
• Provide equipment maintenance and repair hold up as required.
• Guide to cost improvement/reduction programs.

Job Requirements

• Typically requires a bachelor's degree in mechanical engineering or manufacturing engineering or relevant field with equivalent experience and training.
• Typically requires 2-3 years of relevant experience.
• Use of the following tools may be required: Electronic Assembly: color code, component, and schematics.
• May require various PCB operations. Testing: oscilloscope, cable and harness testing, trouble shooting, component testing, logic analyzer. Inspection: bare board, systems, components, cable and harness, microscope, measuring tools. Mechanical & Electrical Tools: taps and dies, alignment tools, measuring tools.
• Those will Electrical & Electronics degree with process / manufacturing experience are welcome to apply.

The Human Resource Generalist will be based in Changi South, Singapore.

In charge of implementing HR programs and providing hold up to business client with respect to all people issues in order to hold up the growth and profitability of the business.

Job Responsibilities

• Contributes with managers on HR strategies and actions such as identify current and future talent needs, recruiting methodologies to find diverse talent, and talent development.
• Advise site management regarding talent matters to drive outcomes that hold up our business goals, i.e., employee engagement, workforce planning, data trends and potential actions, employee policies and program matters.
• Assess management capabilities and business development opportunities.
• Provide feedback and mentor managers.
• Guides Diversity, Equality, and Inclusion activities with heads and employees, creating a safe environment that holds up diversity and provides a safe environment to our diversity workforce
• Participates as an agile member on site and corporate projects, teams, and process improvement.
• Hold up Flex Culture and our Ways of Working and Business Expertise.
• Provide managers with guidance change management regarding culture.
• Serves as a consultant to hiring managers current trends in human resources management, labor laws, HR policies, etc.to reach appropriate outcomes.
• Manage the employee life cycle activities with managers and employees, including on boarding, new employee orientation, annual reflection, merit, separation process and exits, etc.
• Develops local recruitment programs and budgets.
• Develops and maintains network of contacts and coordinates and participation in job fairs, schools and organizations regarding the organization and opportunities.
• Counsel management on policy interpretation and legal awareness.
• Advises and investigates violations of our policies and local labor laws.
• Help reach appropriate resolution of employee relations issues.
• Crafts programs to improve employee satisfaction and retention of critical skill employees, while minimizing company exposure to liability.
• Prepares the research, maintenance and communication of records required by law or local governing bodies, or other department in the organization.
• Partner with Total Rewards in compensation and benefit programs.
• Administer local benefit programs, ensuring compliance with government regulations and reporting.
• Hold up HR Centers of Excellence on global initiatives at the local level.
• Communicate and educate employees and is the head on programs benefiting the site.
• Help craft the programs by participating in program design activities and postmortem reviews.
• Participate and/or manage employee Sustainability initiatives and events and help local sustainability events.

Job Requirements

• Typically requires a bachelor’s degree or its equivalent in education and experience in a Human Resource related function.
• Typically requires 2 years of Human Resources or related experience.
• Has awareness of the functional impact upon work processes and other functions.
• Must be able to communicate to all levels of the organization from production associates through executives.
• Respond to employee issues and regulatory agency inquiries.

Roles & Responsibilities

Responsibilities:

• Handle payroll, yearly Auto-Inclusion Scheme submission and leave management - own the payroll process and contribute to its continuous improvement
• Administration/Employee Data Management matters
• Handle recruitment matters pertaining to interns
• Support recruitment process (including recruitment, on-boarding, confirmation, off-boarding and orientation)
• Data management of leave and claims in HRIS
• Support performance appraisal process and compensation and benefits activities
• Childcare leave claim submission and tracking
• Support work pass matters (New applications, renewals, cancellations)
• Handle and resolve employee queries
• Other ad-hoc tasks assigned

Requirements:

• Experience – 3 year of experience
• Language – English required, and Mandarin preferred
• Personnel and Human Resources — Knowledge of labour law (MOM)

The Program Administrator will be based in Changi reporting to Assistant Program Manager.

This role assists with managing customer accounts in all aspects of the business relationship.

Job Responsibilities

• Assist in the review of program proposals or plans to define time frame, procedures for accomplishing program, staffing requirements and allotment of available resources to various phases of program.
• Confers with appropriate managers within Program Management, Operations and others to outline work plan and to assign duties, responsibilities and scope of authority, and to receive technical advice and resolve problems.
• Drives and coordinates projects/activities with the Customer Focus Team (CFT) members to ensure program progresses on schedule and within prescribed budget, including facilitating the work/communication across different departments.
• Prepares program reports and executive presentations for management, client, or others.
• May assist in metric development and tracking for the program.
• Occasional travel to customer locations.
• Drive the team to look for continuous improvement activities that have an impact in the project timeline, cost or daily production activities.
• Follow up on shipments to ensure we meet site and customer guarantees without any delay and coordinate the team to any issue that could generate an impact.

Job Requirements

• Typically requires a Bachelor’s degree or equivalent experience in addition to 5 years of experience in a manufacturing or related Industry.
• Demonstrates advanced knowledge of functional concepts and a solid comprehension of Flex policies and procedures.
• Has awareness of the functional impact upon work processes and other functions.
• Use of the following tools may be required: Office Skills: telephones, data entry, office software to include, word processing, spreadsheets, presentation package and database systems.
• Demonstrates advanced functional skills which may be used to conduct on-the-job training and/or guide other employees.

The Supplier Quality Engineer will be based in Changi South.

Job Responsibilities

• Attend day to day part quality issues / MRB reviews.
• Serve as the primary point of contact for all supplier-related quality issues.
• Cross-Functional Collaboration: Collaborating with internal teams, such as Engineering, Procurement / Buyer, Planner, Operation, Logistic to address any supplier-related quality issues.
• Collaborating with suppliers to identify root causes of quality issues and implementing effective corrective and preventive actions. Review CAPA effectiveness, ensure no repeating occurrence.
• Work with IQC team in reviewing incoming parts from suppliers with no defects and ensure quality.
• Facilitate effective communication and collaboration between suppliers and internal stakeholders as well as customers.
• Seek for Continuous Improvement with suppliers.
• Identify opportunities for continuous improvement in supplier quality processes and systems.
• Lead initiatives to reduce defect rates and improve overall supplier performance.
• Collaborate with suppliers on process improvements and quality control enhancements.
• Support supplier audits to ensure compliance with quality standards and regulatory requirements.
• Support evaluation and approve new suppliers based on quality performance and capability assessments.
• Documentation: Maintaining accurate records, reports, and documentation related to supplier audits, evaluations, and inspections.
• Supports supply chain in the selection and qualification of suppliers’ parts being procured - FAI (First Article Inspection).
• Any ad-hoc duty as assigned by Superior.

Job Requirements

• Requires a Bachelor’s Degree in Engineering or related field with minimum 3-4 years of related experience.
• Requires experience in supplier quality engineering within the semiconductor manufacturing industry.
• Strong communication and interpersonal skills, with the ability to work effectively with suppliers, internal teams, and customers.
• Able to read blueprints and/or drawing standards.

This role is responsible for planning raw materials, Flavours and Vendor Directs by maintaining safety inventory levels and replenishing based on MRP requirements. Be a back-up for the other raw materials Planner (Non Flavours and Packaging).

Responsibilities:

1. Analyze SAP purchase requisitions and convert to PO’s on timely basis for Flavors and Vendor Directs
2. Manage exceptions such as expedites and postponements or cancellations.
3. Be the data owner for these materials
4. Daily interaction with Production Planners, quality, receiving, freight forwarder to provide updates on raw material availability
5. Management of PO relating to vendor direct items and full process since PO creation until confirmation of shipment; and coordination of internal activities
6. Responsible for providing feedback for New Product Introduction via e-ICE maintenance for common materials
7. Ensure accuracy and maintenance of Safety Stock and raw materials planning master data
8. Meet key inventory and material planning metrics
9. Identify and manage opportunities to optimize SAP functionality
10. Maintain Materials Dashboard KPIs which include PO management, RM shortage, Order Acknowledgement, SOH vs Safety, Shelf life and RM availability
11. Provide accurate and timely feedback in relation to Inventory in Risk (MIRA)
12. Lead and implement projects for inventory optimization and process improvements
13. Monitoring supplier quality and delivery performance and collaborate with procurement team to resolve supply issues
14. Meet all internal and external compliance responsibilities including Purchasing Policy requirements, GCS, SOX & AIBI
15. Adherence to all PepsiCo Health & Safety requirements is a requirement of this role
16. Any other ad hoc duties and projects as assigned

Requirements

Education or Professional Certifications (minimum level required e.g. Bachelor’s degree, Diploma and/or certifications)

• Bachelor’s Degree in Supply Chain, Inventory or Materials Planning
  

Experience (number of years of directly related operational or leadership experience and to specific industry if need be)

• At least 5 years of experience in a related Supply Chain or Operations role particularly in raw materials planning
• Strong operational experience in a dynamic multinational organization
• Experience working closely with third parties and colleagues in remote locations to deliver business objectives an advantage
• Experience in FMCG is a plus.
  

Knowledge and job skills (technical know-how or professional knowledge and job skills required by this post)

• Ability to manage multiple and complex tasks
• Proven ability to execute and deliver on commitments
• Possess knowledge of SAP MM module
• Knowledge of SAP module will be an advantage
• Strong Computer literacy, particularly in MS Office, excel
• Power BI knowledge would be an advantage

Soft skills

• Excellent analytical skill, with proven ability in problem solving and quick decision making
• Excellent interpersonal skill and communication skill in, both verbal and written
• Ability to energize, develop and build rapport at all levels within an organization

Other characteristics or attributes

• Be capable of working effectively in a cross functional and virtual environment.
  

The Financial Analyst will be based in Changi South, Singapore.

Job Responsibilities

• Monthly end closing activities including preparing of GL entries, Accruals, Prepayments, Deferred, Reclassifications.
• Prepare cost actual & analyze cost variance, deep-dive root-cause in monthly basis.
• Perform reconciliation of balance sheet.
• Work with cross team to identify and drive cost savings opportunities.
• Ensure SOX compliance in accordance with Flex standard policy and procedures for financial reporting.
• Support external/Internal auditors in their examination financial statements and compliance.
• Perform special ad hoc projects and analysis.

Job Requirements

• Requires a Bachelor’s degree in Finance, Accounting, or related field.
• Requires minimum 3 years of related experience.
• Strong Knowledge of Finance and accounting concepts.

The Industrial Engineer will be based in Changi South reporting to NPI Manager.

Job Responsibilities

• Analyze production processes, schedules, and workflows to optimize efficiency.
• Develop and implement process improvements to enhance productivity.
• Conduct time and motion studies to identify areas for improvement.
• Design efficient systems integrating workers, machines, materials, and information.
• Establish quality control procedures to ensure product standards are met.
• Manage inventory control and warehouse operations.
• Develop safety procedures to ensure safe working environments.
• Use computer-aided design (CAD) software to create efficient layouts.
• Collaborate with management and staff to implement solutions.
• Monitor operational performance and sustain improvements.
• Use simulation software to simulate new line setup or upsize or downsize of capacity.

Job Requirements

• Typically requires a Bachelor’s degree Industrial Engineering or equivalent experience in addition to 5 years of experience in a manufacturing or related Industry.
• Experience with Lean Manufacturing and Six Sigma methodologies.
• Experience in setting up factory or area for Cleanroom requirements
• Proficiency in CAD and simulation software
• Strong project management skills
• Excellent problem-solving abilities
• Effective communication and teamwork skills
• Understanding of ergonomic principles
• Capability to manage multiple projects concurrently
• Proficiency with statistical analysis tools
• Experience with production planning and control
• Ability to work independently and as part of a team
• Experience and Knowledge of operating bulky and heavy product : 5Mx7M and 10-15 tons weight

The Test Engineer will be based in Changi South reporting to NPI Manager.

Responsible for implementing and maintaining cost-effective methods of testing and troubleshooting systems, software, and/or equipment for state-of-the-art semiconductor component manufacturing equipment's.

Job Responsibilities

• Directs and/or coordinate test process flow for system Integration and modular testing of high precisions electromechanical assemblies.
• Directs and/or coordinate test solutions for system Integration and modular testing in collaboration with OEM to meet the product functional performance to achieve zero defects in field.
• Directs and/or coordinates electronic and electromechanical engineering and/or technical personnel in fabrication and design of testing and test control apparatus and equipment, or software and systems testing.
• Directs and coordinates electronic engineering activities concerned with development, procurement, installation and calibration of instruments, equipment and control devices required to test, and record test data.
• Interfaces and confers with engineering and technical personnel to resolve testing problems such as product or system malfunctions, incomplete test data, data interpretation or coding issues.
• Evaluates and interprets test data and prepares technical reports for monitoring and management purposes.
• Resolve test yield problems by performing evaluation of root causes, developing, and coordinating corrective action measures and monitoring improvements.
• Trains and instructs floor support, test technicians and test operators on test hardware and/or software, as well as problem solving techniques.
• Perform and support equipment verification and integration in production.
• May develop or use computer software and hardware to conduct tests on electronic products and systems or software.
• Create and maintain process documentation.
• Actively search for innovative technologies or procedures in the test sector.
• Defines conditions under which tests are to be conducted and sequences and phases of test operations.

Job Requirements

• Bachelor's degree in electrical and electronics or Mechatronics field or equivalent experience and training which requires at least 4 years of experience in test engineering in the high technology electronics industry or related area.
• Modular/ System Integration Testing: Product functional testing and troubleshooting various test solution at various level component, modular and final system
• Experience in functional software, measuring equipment’s (Oscilloscope, logic analyzer, sensors, measuring gauges etc.) and tools that are integrated to perform the functional test to cover the product functionality
• Experience on modify or updating existing software solutions to support product design changes or test enhancements
• Experience in creating and maintaining stand operating procedures to enable easy of manufacturing and meeting all audit compliance.
• Inspection: PCBA board, systems, components, cable and harness, microscope, measuring tools.
• Handling Mechanical & Electrical Tools: taps and dies, alignment tools, measuring tools.
• Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
• Ability to write reports, business correspondence and procedure manuals.
• Ability to effectively communicate with managers and employees of the organizations.
• Impacts the near-term (quarterly/semi-annual)operational success of the function. Enhances and provides input to functional processes or technologies. Assists in achieving section/sub-function objectives for a functional area. Demonstrates capability in leading a major initiative that may impact multiple sites/customers.

Administered by the Workforce Advancement Federation (WAF), the Career Conversion Programme (CCP) for Biomedical Manufacturing Executives is a premier talent development initiative designed to cultivate the next generation of skilled professionals for Singapore’s Biomedical manufacturing industry. This comprehensive 15-month programme features structured on-the-job training (OJT) provided at Novartis Singapore Pharmaceutical Manufacturing Pte Ltd (NSPM), facilitating the practical application of acquired knowledge and ensuring participants develop the essential competencies required for their roles.

Eligilibity for CCP:

• Singapore Citizen or Permanent Resident;

• Minimum 21 years old;

• Mid-Career Individual: Graduated, or completed National Service, whichever is later, for at least 2 years* prior at the point of application; or

• Fresh Graduate: Graduated, or completed National Service, whichever is later;

• Not in a similar job function prior to joining Career Conversion Programme (CCP);

• Have not attended the same programme – Career Conversion Programme (CCP) for Biomedical Manufacturing Executives / Professionals (Train-and-Place with Commitment to hire) – previously;

• Have not been funded under the same programme – Career Conversion Programme (CCP) for Biomedical Manufacturing Executives / Professionals (Train-and-Place with Commitment to hire) – previously.

• Should not be shareholders, immediate ex-employees of Novartis, or be related to shareholders of Novartis.

Successful candidates must be able to commence the program by March 2025.

Job Purpose

Support all activities in maintaining a QC IPCDS lab in BioPharmOps QC. Testing of in-process control & drug substance samples, to support production needs and document in accordance with written testing SOP’s and in accordance with local/ international regulations.

Key Responsibilities

• Maintain QC IPCDS laboratory in full cGMP-compliance.

• Track and execute individual training requirements to ensure completion on time including new methods and instrumentation.

• Ensure laboratory operations are in accordance to cGMP standards

• Perform raw material testing in accordance current testing monographs/SOPs and in accordance with local/ international regulations.

• Ensures that testing completed in a timely manner based on plan.

• Support laboratory routine operations such as inventory management and house-keepings.

• Support the optimization of work flows in the QC IPCDS Laboratory.

Requirements

• Minimum Diploma with 4 to 5 years relevant working experience in GMP-regulated industries in Quality Control. Fresh graduates are welcome to apply.

• New entrants to biopharmaceutical industry and should not be holding a bond obligation with any organisation

• Background knowledge on analysis such as HPLC, UV Spectrophotometer, pH/Conductivity meter, Total Organic Carbon (TOC),

• Preferrably a working knowledge of FDA and ex-USA regulatory requirements as well as industry quality management tools, standard, and quality systems.

Administered by the Workforce Advancement Federation (WAF), the Career Conversion Programme (CCP) for Biomedical Manufacturing Executives is a premier talent development initiative designed to cultivate the next generation of skilled professionals for Singapore’s Biomedical manufacturing industry. This comprehensive 15-month programme features structured on-the-job training (OJT) provided at Novartis Singapore Pharmaceutical Manufacturing Pte Ltd (NSPM), facilitating the practical application of acquired knowledge and ensuring participants develop the essential competencies required for their roles.

Eligilibity for CCP:

• Singapore Citizen or Permanent Resident;

• Minimum 21 years old;

• Mid-Career Individual: Graduated, or completed National Service, whichever is later, for at least 2 years* prior at the point of application; or

• Fresh Graduate: Graduated, or completed National Service, whichever is later;

• Not in a similar job function prior to joining Career Conversion Programme (CCP);

• Have not attended the same programme – Career Conversion Programme (CCP) for Biomedical Manufacturing Executives / Professionals (Train-and-Place with Commitment to hire) – previously;

• Have not been funded under the same programme – Career Conversion Programme (CCP) for Biomedical Manufacturing Executives / Professionals (Train-and-Place with Commitment to hire) – previously.

• Should not be shareholders, immediate ex-employees of Novartis, or be related to shareholders of Novartis.

Successful candidates must be able to commence the program by March 2025.

Job Purpose

Support all activities in maintaining a QC Raw Materials release lab in BioPharmOps QC. Testing of incoming raw materials and consumables, to support production needs and document in accordance with written testing SOP’s and in accordance with local/ international regulations.

Key Responsibilities

• Maintain QC Raw Materials laboratory in full cGMP-compliance.

• Track and execute individual training requirements to ensure completion on time including new methods and instrumentation.

• Ensure laboratory operations are in accordance to cGMP standards

• Perform raw material testing in accordance current testing monographs and in accordance with local/ international regulations as such as United States Pharmacopoeia (USP), European Pharmacopoeia (EP), American Chemical Society (ACS) and/ or Internal Validated Methods.

• Ensures that testing completed in a timely manner based on plan.

• Support laboratory routine operations such as inventory management and house-keepings.

• Support the optimization of work flows in the QC Raw Material Laboratory.

Requirements

• Minimum Diploma with 4 to 5 years relevant working experience in GMP-regulated industries in Quality Control. Fresh graduates are welcome to apply.

• New entrants to biopharmaceutical industry and should not be holding a bond obligation with any organisation

• Background knowledge on analysis of USP and EP pharmacopeia methods in GMP-regulated industries in Quality Control Raw Materials laboratory.

• Preferably a working knowledge of FDA and ex-USA regulatory requirements as well as industry quality management tools, standard, and quality systems.

Roles & Responsibilities

Responsibilities:

• Able to take measurement on site and sketch the drawing accordingly to the site requirements
• Use AutoCAD to create technical drawings within the time frame
• Prepare drawing and calculations for submission
• Maintain drawing records and report
• Perform other duties or tasks as assigned

Requirements:

• Fresh graduates are welcome to apply. Training will be provided.
• Proficiency with AutoCAD

Job Description & Requirements

1. Formulate and provide directives for Production Department in meeting organization's goals and committed to Quality Management System.
2. Accountable with the assigned factory sections in terms of production, New Model Development, Customer Service and Support, Supplier and Materials Management, Logistics and Transportation.
3. Analyze section profit/loss of projects and providing cost control and cost effectiveness strategy.
4. Provide production & material planning in ensuring production efficiency and on time delivery.
5. Ensure effective control of machine up/down time and well scheduled and optimized planning in machine / work-center load.
6. Manpower balancing and deplaoyment strategy with manpower skill set.
7. Continuous improvement program to ensure productivity, cost and quality effectiveness, general housekeeping and safety.
8. Formulate, identify and conduct management / training workshop to initiate / facilitate staff in aligning organizations missions and objectives and actions plans.
9. Support other function activities within the company to achieve the overall business goals and objectives.
10. Implement process improvement.
11. Authorize the appropriate use of performance monitoring and statistical techniques.
12. Ensure and coordinate the implementation of risk assessment and risk contol of medical devices.

Requirements:

• Preferred to have Diploma / Degree in Mechanical / Precision Engineering or equivalent.
• Minimum 6 years in a Manufacturing environment (preferably in Precision Engrg / Sheet metal industry) and with at least 4 years of supervisory capacity.
• Exposure with involvement in newly factory, product / process set-up is much preferred.
• In-depth understanding of manufacturing cycle and good budgeting control.
• Strong leadership with good analytical and problem solving skill, as well as dynamic in planning and result oriented.

• can work on publick holidays
• can work on shifts/change of shifts
• can work and stand for long hours
• at least 10 years experiences
• have relavant certificates/diploma
• hardworking and keen
• 
  
• Provide overall supervision of production activities.
• Plan, organize and lead a team of production workers to achieve production target and output, cycle time, and yield.
• Improvement in maintaining product quality and productivity. Provide a guideline to check on processes thereby assuring that work is done by the operators.
• Monitor the daily efficiency status of the line.
• Ensure good housekeeping and safety at the workplace.
• Oversee hiring and training of food production personnel
• Perform other duties as assigned.

In this role, you are required to support the daily operations of the production section you are assigned to. You will be required to maintain the production area cleanliness and comply with food hygiene management standards.

Job Description

• Prepare and process of food items (Halal).
• Prepare items according to in-house procedures.
• Follow food production and preparation specifications.
• Preparing food ingredients by measuring, mixing, stirring, chopping, slicing, dicing, peeling, or otherwise preparing them for use in meal preparation.
• Ensure proper and safe operation of machineries.
• Maintain & ensure the cleanliness of work area.
• Check and ensure that quality and quantity of items ordered are received and stored in proper condition.
• Keep track of inventory to ensure adequate food ingredients, packaging supplies and finished product.
• Perform other ad-hoc duties as requested.

Requirements:

• Physically fit
• Able to work as a team.
• No Experience may apply.

Work at 15 Jalan Tepong (near Jurong Fishery Port)

Company bus to and from West Gate Shopping Mall (Jurong East MRT)

Preparing, baking, packing and handling pastries items. General production work. Train on the job.

Job description and requirements:

-Assist in the preparation and production of company's products

- Assist in the handling and packing of the company’s products

-Packing and storing of finished products and/or baking ingredients

-Assist to help allocate and send the daily stock down to the receiving area for distribution to transport vehicles

-Able to work in a fast-paced environment

-Ad-hoc duties

-Hardworking and punctual

-Willing to work overtime

Responsibilities:

• Oversee inventory to meet production demands and avoid shortages.
• Collaborate with internal teams and suppliers to ensure timely material delivery.
• Adjust production schedules as necessary to meet deadlines.
• Ensure product quality by working closely with the testing team.
• Schedule production staff according to workload requirements.
• Utilize ERP/MRP systems for streamlined planning and scheduling.
• Supervise production staff for effective task completion as required.

Requirements :

• Diploma in Manufacturing Engineering or equivalent.
• At least 1 year of working experience in electronics manufacturing.
• Experienced in material planning, inventory management, and proficient in ERP and MRP systems.
• Possess leadership and supervisory skills.

_________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

We are seeking an a Production Planner to join our UAV team. The ideal candidate will be responsible for planning, scheduling and coordinating production activities to ensure timely delivery of unmanned aerial vehicles (UAVs) while optimizing resources and maintaining quality standards. This role requires strong analytical, organizational, problem-solving skills and with a deep understanding of production planning and supply chain management.

Job Description:

a. Production Scheduling:

• Develop and implement detailed production schedules for UAV manufacturing, ensuring timely and efficient production.
• Adjust schedules based on changing demands, resource availability and unforeseen delays.

b. Inventory and Material Management:

• Monitor inventory levels and coordinate with procurement to ensure all materials and components are available.
• Optimize inventory levels to avoid shortages or excess stock.

c. Capacity Planning:

• Analyze production capacity and proposed allocation of resources (machinery, manpower, materials) to meet production targets.
• Collaborate with manufacturing team to ensure production aligns with available resources and equipment maintenance schedules.

d. Collaboration with Cross-functional Teams:

• Coordinate between engineering, procurement, quality assurance and manufacturing teams to ensure seamless workflow and communication.
• Work closely with program manager, quality control and procurement teams to align production with project timelines and customer demands.

e. Production Monitoring:

• Track production progress, identify bottlenecks and proactively adjust schedules to mitigate potential delays.
• Ensure that production goals are met while maintaining high standards of quality.

f. Data Reporting:

• Generate and present regular reports on production performance, inventory levels and resource utilization.

g. Quality Assurance:

• Work closely with the quality control team to ensure assmebled UAVs meet company standards

Job Requirements:

• Degree/ Diploma in either Supply Chain Management, Production/Operations Management or any related field.
• Possess 3 years of experience in production planning
• Proficiency in SAP production planning software and Microsoft Office Suite (Excel, Word, PowerPo (optional but preferred)

Abbott is a global healthcare leader, creating breakthrough science to improve people’s health. We’re always looking towards the future, anticipating changes in medical science and technology.

Primary Function:

• Ensure the execution of the capital project on processes, equipment, plant facilities are compliance with the Safety and GMP policies, procedures, standards, and statutory requirement
• Deliver projects independently on time, on budget and in scope.
• Manage project capital and expense cash flow budgets.
• Manage project cost status-raise Purchase Orders, process invoices on a timely manner
• Provide timely project status review
• Manage key portfolios in Project Management Office such as Capital Planning, Site Master Planning, Shutdown Planning, Drawings Management and Metrics Reporting.

Major Responsibilities:

• Implement plant continuous improvement projects and cost saving efforts.
• Lead and implement workflow streamlining projects in the company.
• Manage reward and recognition and employee engagement programs in the organization.
• Perform data analysis on production data and identify opportunity for improvement.
• Manage various improvement programs and workstreams in the plant, track and report benefits of projects.
• Drive continuous improvement culture and mindset in the organization.
• Any other duties as assigned by supervisor.

Requirements:

• Bachelor Degree in Chemical/Mechanical/Electrical or in related discipline
• Ideally 6-8 years’ experience in project management or manufacturing operations in manufacturing industry.
• Experienced in project management and leading cross functional teams.
• Conceptual understanding on Lean Six Sigma principles and Focused Problem Solving skills.
• Strong communication skills, interpersonal skills and negotiation skills.
• Proficient in statistical analysis, process mapping, graphic design skills will be an advantage.
• Knowledge in Project management skills.
• Able to react efficiently to situation and able to work independently.

*Kindly note this position is based in Tuas.

Follow your career aspirations to Abbott for diverse opportunities with a company that can help you build your future and live your best life. Abbott is an Equal Opportunity Employer, committed to employee diversity.

We are looking for a knowledgeable and enthusiastic cook with experience in both North/South Indian cuisine to work with us. We are for a candidate who can work with us to create new varieties of food products as well as improving our current line of food products through flavour enhancement, food longetivity and quality control.

Job Overview

Continental Steel, a leading steel supplier with over 40 years of experience, is expanding its operations to include a newly established Steel Fibre division. We are seeking a skilled and dynamic individual to operate and maintain the steel wire drawing and fibre forming and cutting machines. The successful candidate will play a crucial role in ensuring efficient production, maintaining equipment, and upholding product quality.

Role Summary

The Steel Fibre Division Operator/Technician will be responsible for operating and maintaining steel wire drawing and fibre forming machines within our newly established Steel Fibre division. This role is critical in ensuring efficient production, maintaining equipment, and upholding product quality from raw material processing to final packaging.

Job Responsibilities:

1. Machine Operation and Maintenance:

• Operate and maintain steel wire drawing and fibre forming machines.
• Monitor production processes, troubleshoot issues, and ensure smooth operation.
• Perform routine maintenance tasks.

2. Quality Assurance:

• Uphold product quality standards by following procedures.
• Conduct regular inspections to identify deviations or defects.
• Perform tensile testing on steel fibres to assess their strength and durability.
• Ensure compliance with safety protocols.

3. Process Optimization:

• Continuously improve production efficiency and output.
• Participate in process optimization initiatives.

4. Material Handling:

• Handle raw materials, WIP and finished products (steel wire) and ensure proper and safe materials handling.
• Monitor material inventory levels and coordinate with the supply chain/warehouse team.

5. Fibre Forming and Cutting:

• Perform fibre forming to required shape as needed.
• Cut fibres to specified lengths for packaging.

6. Packaging and Final Product:

• Package steel fibres according to guidelines.
• Ensure proper labeling and documentation.
• Collaborate with packaging and logistics teams.

7. Safety and Compliance:

• Participate in safety training and adhere to safety protocols.
• Report any safety incidents promptly.
• Contribute to maintaining a safe work environment.

8. Collaboration:

• Work closely with colleagues, including the Production Manager.
• Provide feedback on process improvements and equipment maintenance.

Qualifications:

Education:

• O-Level, ITE or equivalent.

Experience:

• Minimum of three years of related experience in manufacturing, preferably in steel production or similar industries is preferred.
• Experience with operating steel wire drawing equipment and maintenance of such equipment.
• Experience with operating butt-welding equipment to join wires.
• Knowledge of consumables used in wire drawing operations like dies, pressure dies, calcium/sodium-based lubricants, etc.

Skills:

• Familiarity with operating and maintaining machinery.
• Basic knowledge of steel processing techniques.
• Ability to use hand tools and precision measuring instruments.
• Strong communication skills.
• Proficiency in English.

Certifications (if applicable):

• Relevant certifications related to machinery operation and safety.

We are looking for a knowledgeable and enthusiastic cook with experience in both North/South Indian cuisine to work with us. We are for a candidate who can work with us to create new varieties of food products as well as improving our current line of food products through flavour enhancement, food longetivity and quality control.

Responsibilities:

• Oversee inventory to meet production demands and avoid shortages.
• Collaborate with internal teams and suppliers to ensure timely material delivery.
• Adjust production schedules as necessary to meet deadlines.
• Ensure product quality by working closely with the testing team.
• Schedule production staff according to workload requirements.
• Utilize ERP/MRP systems for streamlined planning and scheduling.
• Supervise production staff for effective task completion as required.

Requirements :

• Diploma in Manufacturing Engineering or equivalent.
• At least 1 year of working experience in electronics manufacturing.
• Experienced in material planning, inventory management, and proficient in ERP and MRP systems.
• Possess leadership and supervisory skills.

_________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

HOW MIGHT YOU DEFY IMAGINATION?

Amgen is one of the world’s leading independent biotechnology companies. For over 4 decades, Amgen has pioneered biotechnology breakthroughs, to bring state-of-the-art medicines from laboratory to the patient. Amgen has not only discovered and developed innovative human therapeutics, but has invested in cutting edge manufacturing capability and support services to deliver these exciting therapies to medical teams around the world. Japan and Asia Pacific (JAPAC) is the fastest growing region in Amgen. Now we are hiring an Senior Manager (Process Development) in Singapore.

Senior Manager (Process Development)

What you will do

The successful candidate will apply subject matter expertise to support technology transfer and ongoing cGMP production of commercial protein biologics processes. Scope of work could include:

• Lead site PD activities for continuous improvement, productivity improvement, and product life cycle management.

• Lead and manage PD safety and compliance initiatives including inspection readiness.

• Manage and oversee PD related projects, ensuring they are completed on time, within scope, and budget. Analyze project outcomes to identify areas for improvement and drive continuous optimization.

• Represent PD on key projects or business processes.Stay abreast of industry trends and leverage expertise to ensure the success of the Amgen Singapore Site, focusing on reliability, efficiency, agility, and differentiation.

• Collaborate with cross-functional teams and network drug substance teams for process alignment by applying advanced technical principles and concepts.

• Site PD champion for digital literacy and new digital tools deployment for process monitoring, tech transfer, and facility modeling. Apply best practices to leverage data for more proactive and predictive approaches.

• Support regulatory filings, audits and inspections, and other CMC activities.

Win

What we expect of you

Basic Qualifications

· Doctorate Degree and 2 years of biologics process development or commercial-scale technical support experience Or

· Master’s Degree and 6 years of biologics process development or commercial-scale technical support experience Or

· Bachelor’s Degree and 8 years of biologics process development or commercial-scale technical support experience

Preferred Qualifications

· 6+ years in a technical role supporting manufacturing processes or 8+ years as a project manager for cross-functional teams within regulated environments (i.e., cGMP)

· Strong oral and verbal communication skills, interact effectively with diverse internal and external (suppliers) stakeholders.

· Knowledgeable in regulatory filings authoring and inspections. Experienced in biopharma product end to end lifecycle management (e.g product team lead).

· Familiarity in MoF single use facility operational aspects of commercial biopharma manufacturing and proficient in big data analysis.

· Working experience with capital / engineering project from early stage to project turnover.

· Stakeholder Communication: Maintain clear and effective communication with all project stakeholders in multicultural working environment, including providing regular updates and managing expectations.

· Agility and Learning: Promote a culture of agility and learning within project teams, encouraging innovation and adaptability in a dynamic business environment.

Thrive

What you can expect of us

As we work to develop treatments that take care of others, so we work to care for our teammates’ professional and personal growth and well-being.

• Vast opportunities to learn and move up and across our global organization
• Diverse and inclusive community of belonging, where teammates are empowered to bring ideas to the table and act
• Generous Total Rewards Plan comprising health, finance and wealth, work/life balance, and career benefits

Apply now

for a career that defies imagination

In our quest to serve patients above all else, Amgen is the first to imagine, and the last to doubt. Join us.

careers.amgen.com

Equal Opportunity Statement

Amgen is an Equal Opportunity employer and will consider you without regard to your race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status.

We will ensure that individuals with disabilities are provided a reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request an accommodation.