JOB RESPONSIBILITIES

· Lead new product and manufacturing transfer activities, setup of medical device service & repair facility

· Implement new production / service/ project initiative and manage budget and timeline.

· Liaise with customer on all new product development/ service & repair activities

· Perform intermediary role between Research & Development (R&D) & manufacturing and service & repair.

· Lead and provide direction to Cross Functional Team.

· Champion to lead & develop from First Article / prototypes to customer's approval.

· Work closely with Supplier Chain, Operations & Quality on supplier qualification, Process Failure Mode Effects Analysis (PFMEA), equipment qualification and process validation, establish service & repair processes

· Perform other tasks as assigned by the supervisors.

JOB REQUIREMENTS

· Minimum Degree in Engineering

· Minimum 3 years of relevant working experience

· Experience in NPI & Project Management

· Familiar with the requirement of medical device service & repair center and its operating process

· Project Management skill

· Communication and leadership skills

· Problem Solving and decision-making skills

· MS Project skill

· Process Failure Mode Effects Analysis (PFMEA) and process validation skill

Job Description

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Food Manufacturing Supervisor Responsibilities:

• Designing delicious and attractive menus and continuously making improvements.
• Forecasting, planning, sourcing, and ordering food supplies for the kitchen, as well as beverages to stock the bar and fridges.
• Building positive relationships with food and beverage vendors.
• Adhering to the food and beverage budget.
• Managing daily food and beverage operations.
• Following food and safety regulations.
• Maintaining positive customer relationships, processing complaints, and responding to customer needs.
• Assisting with marketing events.
• Creating and enforcing restaurant policies, targets, and KPIs.
• Hiring, training, and managing food and beverage staff.

Key Responsibilities

Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies.

Interfaces with other engineering functions to coordinate the release of product improvements and/or new products. Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products.

Estimates manufacturing costs, determines time standards and makes recommendations for tooling and process requirements. Uses DFx principles to reduce manufacturing and/or product costs, and improve delivered product quality.

Develops and uses test procedures, including assisting with the definition of test specifications with design / software engineering. May work with test engineering on the design and development of text fixtures. May assist in the coordination of test fixture sourcing activities.

Gathers operational and test data and evaluates results; may takes corrective/continuous improvement actions.

Evaluates work methods, procedures and policies. Participates in the development and maintenance of new and existing business processes; updates as necessary to ensure current practices are documented.

Determines root cause and corrective action analysis for issues that arise during assembly and/or test of systems; provides failure analysis report as required.

Performs Process Failure Mode, Effects and Criticality Analysis when working with New Product Development.

Other Requirements: This position may require standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools.

Additionally, because this position also may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities

Business Expertise

• Understands key business drivers; uses this understanding to accomplish own work

Leadership

• No supervisory responsibilities but provides informal guidance to new team members

Problem Solving

• Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents

Impact

• Impacts quality of own work and the work of others on the team; works within guidelines and policies

Interpersonal Skills

• Explains complex information to others in straightforward situations

Job Description

Key Responsibilities

1. Provides executive leadership to a major manufacturing / supply chain function supporting a large and complex business unit. May lead functional operations at multiple manufacturing sites. Establishes and monitors production using metrics/budgets through systems, and initiates appropriate corrective action as needed and based on results. Establishes and controls project schedules, timelines.
2. Plans and evaluates optimal resource utilization and efficiency of operation to minimize costs and allow for on-time delivery of product to customers. Accurately establishes plant capacity.
3. Directs, guides, monitors, and evaluates Operations Team personnel to accomplish specific production and supply chain goals consistent with established operational, housekeeping (5S), and safety procedures and processes. Engage in problem solving in complex situations and process improvements in streamlining work processes.
4. Leads continuous improvement efforts and projects to refine production methods and processes to produce quality products that meet customer requirements in the most cost-effective manner.
5. Identifies and pursues new technologies to improve production, increase efficiency and resource utilization and maximize profitability.
6. Works closely with members of Senior and Executive Management to align overall operations development with business needs/opportunities. Promotes an environment of cooperation and trust.
7. May provide ownership / leadership for a major divisional function, project, or program (i.e., Inventory Management, AMPS/Lean, Responsiveness / Agility). Provides leadership, guidance, mentorship, and personal development of his/her direct reports in the areas of daily operational management, systems development, and optimization.
8. Identifies process and quality changes designed to improve manufacturing or department capabilities. Drives Lean, Safety and Quality. Takes corrective action.

Functional Knowledge

• Demonstrates broad and comprehensive understanding of different systems, theories and practices

Business Expertise

• Applies broad industry and commercial awareness to drive financial and operational performance across business unit, department or sub-functions

Leadership

• Leads through subordinate managers of managers; executes segment/functional business plans and contributes to the development of segment/functional strategy

Problem Solving

• Directs the resolution of highly complex or unusual business problems applying advanced analytical thought and judgment

Impact

• Guided by segment/functional strategy, impacts results of a department, business unit or sub-function or facilitates the work done by other segments/functions by providing support to impact the business

Interpersonal Skills

• Negotiates and influences the opinions of others at the senior executive level and in external organizations; exercises sensitivity to the audience

Position requires understanding of Applied Materials global Standards of Business Conduct and compliance with these standards at all times. This includes demonstrating the highest level of ethical conduct reflecting Applied Materials' core values.

Job Description & Requirements:

• Ensure that all products are manufactured with utmost efficiency and quality, according to planned protocols using the appropriate technology. Evaluates, products, components and applications by designing and conducting researching programs, applying knowledge of project and materials
• Develops products by studying customers' requirements, researching and testing manufacturing and assembly methods and materials
• Assures products' quality by designing finished products
• Prepare report by collecting, analyzing and summarizing information trend
• Guide assembly of automation module / machine according to mechanical assembly drawing, and electrical schematic diagram
• Able to interpret well on mechanical drawings, assembly drawings and electrical schematic diagrams
• Guide and improve the production performance of the department together with Manufacturing Manager (quality, lead-time, delivery performance, costs)
• Work closely with the Quality department to assure conformity of product to customer requirement
• Monitor and adjust production processes or equipment for quality and productivity
• Other responsibilities that may be assigned from time to time
• Perform ad-hoc tasks when requested

Requirements:

• Degree / Diploma in Mechanical/Electrical/Mechatronics
• 1-4 years of relevant experience preferably in Assembly of Equipment or Test area preferably in Semiconductor Industry
• Experience in maintaining the Quality of Work
• Knowledge of Material BOM’s
• Capable of understanding Engineering drawings for Mechatronics-assembly
• Experienced in Manufacturing Engineering Tools (5S, Process Flow, FMEA, System Risk Analysis, DMAIC, 8D, Control Plan, SOP, SOO, Work Instructions, Root Cause Analysis, Capacity versus Demand)
• Experience in Mechanical Fitting, Cable Routing and Installation of Equipment. Preferably in a Semiconductor Equipment Industry.
• Able to use Solid works to design simple fixtures / jigs
• Technical skills must include basic knowledge of mechanical/Electrical/Mechatronics
• Ability to work independently with minimal supervision

Roles & Responsibilities

• Responsible for production scheduling, working orders and recordings.
• Ensure production activities are carried out properly and efficient utilization of manpower.
• Train new production staff on proper working methods and production recording.
• Work closely with Quality Controller to ensure high Quality products are achieved.
• Ensure the production operation is in the context of ISO & HACCP programs e.g. hygiene standard, work instruction, production records are properly followed and recorded.
• To ensure that all operational duties by the team are completed on a daily schedule, ahead of time, efficiently and effectively
• To provide excellent customer service and management and to ensure that all your staff understands the importance of such standards
• Ensure smooth day-to-day operation of the team
• Obtain sales target and KPIs given by the management
• Assist in planning schedule
• Promote positive work environment
• Ensuring compliance with licensing, hygiene and health and safety legislation/guideline
• Develop strategic and operational plans for managing execution and measuring results
• Any other duties as may be assigned by management
• Must Able to work night shift and split shift
• Must Able to work OT on weekends and public holiday

Authorities and Responsibilities

1. To organize, co-ordinate, check and ensure all production activities follow as plan.
2. Calculate machine cycle time and organize production schedule base on machine capacity and capabilities
3. Plan manpower resources and delegate machining job to machinist
4. Verify program issue to workshop
5. Analyze and provide solution to solve problems between programmer and production dept.
6. Analyze monthly machining and scrap report
7. Good supervisory skill, people skill and 5 ‘S’ housekeeping
8. Good writing and communicating skill
9. Good in mechanical process, such as machining process, H/T, jig and fixture etc.

Competence Requirements

• Preferred NTC 2 / Diploma in Engineering discipline or equivalent.
• Minimum 3 years of working in related industry, and having 2 – 3 years of supervisory experience and preferably with working knowledge in machining processes.
• PC literate
• Possess excellent interpersonal communication skills and is an effective team player who is also self driven with a strong achievement orientation.

Primary

1. To Provide primarily support at production department.
2. Assist superiors in prepare and compile reports.
3. Prepare, generate and release job order / purchase requisition to various departments of the confirmed job orders.
4. Responsible for planning of production output, monitor machine capacity, OEE etc.
5. Work closely among inter-departments to ensure committed schedules are met.
6. Provide regular update to the sales/Projects team on project development in a timely manner.
7. Maintenance and upkeep records of Production/Engineering/Technical documents.
8. Arrange production run according to Supervisor/HOD instruction.
9. Receiving/distribution of raw material for production usage.
10. Parts distribution to other departments for next process.
11. Able to systemize and improve on workflow.
12. Good application and know-know on the ERP / reporting tools.
13. Ability to understand or interpret all technical drawing and part specification.

Education level:

1. Min. NTC/Nitec level ME/Mechatronic or its relevant.

Experience level:

1. Two (2) years in relevant experience in clerical environment or manufacturing or its relevant

2. Perform competent in clerical duties, computer literacy.

3. Result oriented, resourceful and independent.

4. Ability to read, understand mechanical drawing and Geometric Dimensioning and Tolerance.