Responsibilities :

• Analyze and prioritize vulnerabilities based on severity, potential impact and business risk, and collaborate with relevant teams to implement effective mitigation strategies.
• Provide strategic guidance, insights, and direction on technological, cybersecurity, and policy-related topics.
• Lead and participate in the development, implementation, and continuous improvement of incident response procedures, and processes.
• Collaborate with other teams at multiple geographic locations to investigate and document security incidents, root causes, and recommend remediation actions.
• Planning and appraising ongoing assessment of antivirus, application control, firewall, SIEM, VPN, SSL, intrusion detection or intrusion prevention and other network component policies.
• Managing and configuring security systems such as firewalls, intrusion detection and prevention systems, anti-virus software, and other security-related software and hardware.
• Monitoring systems, servers, and networks to detect and respond to potential security threats or suspicious activities.
• Developing and implementing security policies and procedures that ensure the organization’s data and systems are protected against cyber threats.
• Conduct regular vulnerability assessments and penetration testing to identify potential security weaknesses and risks to make improvements in the organization’s security.
• Report all security incidents to the home office and work with corporate IT on response and resolution strategy.
• Contribute to the development and execution of security awareness training programs for employees to enhance security awareness and best practices.
• Stay up to date with the latest cybersecurity threats, attack techniques and incident response strategies.

Requirements :

• Bachelor’s degree in computer science, information technology, or equivalent experience.
• 5+ Years of experience in a cyber or information security management role.
• Strong knowledge of the latest cybersecurity threats, trends, modern cybersecurity concepts, and technologies (zero trust, CIS Controls, OWASP, MITRE ATT&CK, XDR, CloudSec, AppSec, NIST, ITIL, Azure Well Architected Framework, etc).
• Experience in domains of Cyber Security Operations, Incident Response, Forensic Investigation, Threat Intelligence, or Vulnerability Management preferred.
• Ability to manage and configure security systems, monitor network traffic and system logs, conduct regular security assessments and respond to security incidents.
• Demonstrated understanding of business processes, IT risk management, and related standards.
• Proficiency in utilizing industry-standard tools for vulnerability scanning, assessment, and penetration testing.
• Excellent problem-solving skills and the ability to think critically under pressure.
• Effective communication and interpersonal skills, with the ability to collaborate across teams and convey technical concepts to non-technical stakeholders.
• Proven track record of staying current with evolving cybersecurity threats and best practices.
• Exceptional planning and organizational skills, and excellent written and oral communication.
• Self-starter with initiative and the ability to effectively prioritize and execute tasks with direction from corporate headquarters.
• Professional information security certification preferred, such as:CompTIA Security+
  Certified Information Systems Security Professional (CISSP)
  Certified Information Systems Auditor (CISA)
  Certified Information Security Manager (CISM)
  

Interested candidates who wish to apply for the advertised position, please clock on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY Singapore PTE LTD)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Role:

Production Engineer (Mechanical / Manufacturing)

• Singapore Based (Senoko, Sembawang area, company transport provided)
• 5 Days work per week (8am to 5.30pm)
• Salary: $3,500 - $4,500 + Allowance + AWS + VB
• Degree in Mechanical/Manufacturing Engineering or equivalent + 2 years with relevant experience is an added advantage.
• Knowledge on TS/IATF 16949, OHSAS18001, ISO14001, SPC, FMEA and TPM will be added advantage.
• Require putting on jumpsuit and protective mask as Personal Protective Equipment whenever it is necessary. + Willing to work overtime when needed
• Career Progression Opportunities

Responsibilities

• Responsible for production operation activities to ensure smooth and efficient manufacturing process.
• Liaise with cross functional department on effective corrective/preventive actions, including carry out improvement activities such as process optimization, benchmarking, etc through various statistical tools and software.
• Handle audit in accordance with TS/IATF & ISO and OHSAS requirements

#SCR-vicky-wee

✅ Wee Yuan Huan
✅ Reg No: R21100383
✅ The Supreme HR Advisory Pte Ltd
✅ EA No: 14C7279

Our client is a leading semiconductor manufacturer and they are hiring for a manufacturing technician.

Responsibilities:

• Uses standard work orders, schematics, wiring diagrams, parts lists, and both written and verbal instructions to assemble, repair, and test electrical, electro-mechanical, vacuum, and pneumatic assemblies and components.
• Conducts electro-mechanical assembly tasks, including troubleshooting and repairs.
• Identifies and rectifies errors.

Talent:

• No experience required

To apply online please use the 'apply' function. (EA: 94C3609/ R1982617)

Responsibilities

1. Seek and interpret inputs from across the organization to build a demand plan that will drive operational activity in line with the business objectives.

2. Manage the production plan and process operation in the plant.

3. Develop requirement plans for tollers to ensure the tolling plants is operating in line with planned requirements.

4. Manage the import and/or export of components or products to support the demand plan activities in other regions.

5. Manage inventory levels within target ranges for key materials and key locations. The aim is to have adequate material to maintain supply without increasing working capital costs to an unacceptable level.

6. Maintain understanding of short term & medium-term capacity availability and constraints. This is so that related enquiries arising from the supply, business and logistics teams can be addressed (in co-ordination with the Regional Marketing Manager/Global Business Manager) in a clear, accurate and responsive manner.

7. Respond to changes in plan in a timely manner. In addition to updating the demand plan and material movement requirements, this should also include highlighting likely impact of these changes to the business team. This is to ensure that the impact of these changes is understood across the Regional/Global teams.

8. Where required, participate in regional S&OP meetings. This will include providing reports on plans, inventory/capacity outlook, actions associated with product transitions and new product introductions. The aim is to use the meeting to communicate the demand plan and seek input and validation.

9. Collaborate with planners in one’s own region and other regions to ensure coordination of material requirements and shared global resources (such as plant capacity) and develop best practice procedures.

10. Be aware of, and support where necessary, other Supply operations within the region to ensure that Planning activities are aligned with Logistics and Procurement objectives.

11. Support Inventory and other ad-hoc reporting for both Demand and Supply Planning.

12. Support company quality and safety systems through day-to-day activities and via formal feedback mechanism.

Requirements :

• Degree / Diploma in Logistics / Supply Chain / Manufacturing or equivalent certifications
• 2 or more years experience in logistics, material planning, or coordination roles
• ERP competency in materials managements and supply planning
• Effective interpersonal, oral, and written communication skills

Other:

• Monday to Friday

************************************************************

START YOUR REWARDING CAREER WITH US NOW!

************************************************************

Interested Candidates, Please send your Detailed Resume stating Past Employments, Including Reasons of Leaving, Current / Last Drawn and Expected Salary to: [email protected]

WE REGRET TO INFORM THAT ONLY SHORTLISTED CANDIDATES WILL BE NOTIFIED

Manfield Employment Services Pte Ltd (Lic. No: 95C2823)

Posting Personnel: Leroy Lok

EA Personnel Reg No.: R2090115

Job Description:
We are seeking a highly skilled and experienced Cybersecurity Manager to lead and strengthen our Clients' organization’s security posture. The successful candidate will be responsible for analyzing vulnerabilities, developing security strategies, leading incident response efforts, and managing security technologies across the enterprise. This role involves close collaboration with cross-functional teams to ensure the security of systems, networks, and data, while keeping abreast of the latest cybersecurity threats and best practices. If you have a passion for cybersecurity and a proven track record in security management, we’d love to hear from you!

Key Responsibilities:

1. Vulnerability Analysis & Mitigation

• Analyze and prioritize vulnerabilities based on severity, potential impact, and business risk, and collaborate with relevant teams to implement effective mitigation strategies.
• Conduct regular vulnerability assessments and penetration testing to identify potential security weaknesses and recommend appropriate improvements.

2. Incident Response & Management

• Lead and participate in the development, implementation, and continuous improvement of incident response procedures and processes.
• Collaborate with geographically diverse teams to investigate and document security incidents, perform root cause analysis, and recommend remediation actions.
• Report all security incidents to the home office and work with corporate IT on response and resolution strategy.

3. Security Systems & Network Management

• Manage and configure security systems such as firewalls, intrusion detection and prevention systems, anti-virus software, and other security-related software and hardware.
• Monitor systems, servers, and networks to detect and respond to potential security threats or suspicious activities.
• Plan and appraise ongoing assessments of antivirus, application control, firewall, SIEM, VPN, SSL, and other network component policies.

4. Security Policy & Compliance

• Develop and implement security policies and procedures to ensure the organization’s data and systems are protected against cyber threats.
• Stay up to date with the latest cybersecurity threats, attack techniques, and incident response strategies.
• Contribute to security awareness training programs for employees to enhance security awareness and best practices.

5. Strategic Guidance & Collaboration

• Provide strategic guidance and direction on technological, cybersecurity, and policy-related topics.
• Collaborate across teams to drive the implementation of security solutions and initiatives that align with business objectives.
• Communicate technical security concepts to non-technical stakeholders effectively, ensuring clarity and alignment on security measures.

Education & Certifications:

• Bachelor’s degree in Computer Science, Information Technology, or a related field.

Requirements:

Experience & Knowledge

• 5+ Years of experience in a cyber or information security management role.
• Strong knowledge of the latest cybersecurity threats, trends, and modern cybersecurity concepts and technologies, including but not limited to:Zero Trust, CIS Controls, OWASP, MITRE ATT&CK, XDR, CloudSec, AppSec, NIST, ITIL, and Azure Well Architected Framework.
  
• Experience in domains such as Cyber Security Operations, Incident Response, Forensic Investigation, Threat Intelligence, or Vulnerability Management is preferred.
• Proficiency in using industry-standard tools for vulnerability scanning, assessment, and penetration testing.

Skills & Abilities

• Ability to manage and configure security systems, monitor network traffic and system logs, conduct regular security assessments, and respond to security incidents.
• Strong analytical and problem-solving skills, with the ability to think critically under pressure.
• Demonstrated understanding of business processes, IT risk management, and related standards.
• Effective communication and interpersonal skills, with the ability to collaborate across teams and convey technical concepts to non-technical stakeholders.
• 
  
• Self-starter with initiative and the ability to effectively prioritize and execute tasks with direction from corporate headquarters.

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY Singapore PTE LTD)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

• Manage the manufacturing plant operations from warehousing, production, quality control, purchasing and maintenance.
• Hands on in the daily operations at the manufacturing plant.
• Implement and maintain good manufacturing standards to achieve higher efficiency, productivity and quality.
• Handle supply chain of raw materials, packaging and machinery for new and existing products.
• Create realistic workflows for plant operations to run smoothly.

Requirements:

• Diploma and above
• At least 5 years of production planning and managing production operations experience in a food manufacturing industry.
• Excellent problem-solving skills with good planning, organization and project management skills.
• Familiar with local regulation (SFA, NEA) and F&B certifications (BRC/FSSC22000).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

The Manufacturing Engineer is responsible for product, process and equipment development and ensuring that existing processes and equipment meet quality requirements and operational objectives at GE Aviation, Engine Services - Singapore. This role requires deep level of relevant experience and expertise within the same manufacturing/production field

Essential Responsibilities:

• Own all technical issues relating to the product/process, eg. product and process yield rates, etc.
• Perform process trials, analyse data and produce write-ups on the trials.
• Prepare technical specifications for the purchase and upgrading of relevant equipment.
• Implement New Product Introduction (NPI)s, new coating and welding processes into production.
• Generate Work Instructions and Operating Procedures.
• Ensure that all relevant processes comply with quality requirements, conduct investigations and implement corrective actions as required.
• Collaborate with relevant stakeholders to improve equipment utilization and labour efficiency and reduce operating costs through Lean initiatives.
• Conduct Risk Assessments and ensure that relevant processes are operated in compliance with Environmental, Health and Safety Regulations and Policies.
• Conduct training and certification for relevant technicians.
• Familiar with using lean concept to drive continuous improvement and productivity in the processes.
• Familiar with Lean concepts

Qualifications/Requirements:

• Degree in either Mechanical or Aerospace Engineering from a local or internationally recognised university.
• At least 5 years experience in a Manufacturing Environment is preferred.
• Candidate with previous experience within Aerospace industry is preferred.
• Candidate with a background in manufacturing or production would be considered.

Desired Characteristics:

• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes, critical thinker

The Manufacturing Engineer – NPI is responsible for the timely development and industrialization of Component Repair New Product Introduction (NPI) projects, working with relevant functional teams, and ensuring safety, quality, delivery and cost objectives are met.

Roles and Responsibilities

• Lead and develop repair processes for Component Repair New Product Introduction (NPI)
• Generate manufacturing routers and instructions, Repair Source Substantiation packages, and other documentation required for industrialization and approval.
• Lead resolution of technical and operational challenges or concerns raised, and ensure follow through till approval is obtained and repair is handed over to shop operations.
• Work closely with the Repair Development and Delivery team in Singapore, USA & other global sites, during the NPI repair development phase & industrialization.
• Manage multiple NPI projects by providing scheduling, resource management, budget control and EHS compliance.
• Lead and effectively interface with Operations, Quality, Engineering, and other support teams during NPI repair industrialization in the Shop, and ensure that it meets Safety, Quality, Delivery, and Productivity objectives, within schedule and budget.
• Interface with vendors and internal functions in an effective manner to ensure that the action items to be carried out for the NPI are executed on time and on budget.
• Assure that all engineering designs and technical data are completed and accurately documented to provide an accurate technical/historical base for future reference and to meet customer / end user requirements.
• Participate in Lean initiatives, including continuous improvement of processes, and utilize Six Sigma tools for NPI process improvements.
• Implement new technology and/or process improvements to increase productivity of new repair processes.

Required Qualifications

• Bachelor’s degree from an accredited university in Mechanical / Aeronautical / Material or other relevant Engineering discipline with 4 years of relevant experience.

Desired Characteristics

• Good understanding of manufacturing and inspection tools and processes used in the repair industry – heat treat, thermal spray, peening, welding, machining, etc.
• Working knowledge of blueprints, application of engine manuals and technical substantiation process will be an advantage.
• Good time management and strong organizational skills, with ability to multi-task to meet deadlines and customer needs.
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes, critical thinker.

Roles and Responsibilities

• Lead and develop repair processes for Component Repair New Product Introduction (NPI) independently.
• Generate manufacturing routers and instructions, Repair Source Substantiation packages, and other documentation required for industrialization and approval.
• Lead resolution of technical and operational challenges or concerns raised, and ensure follow through till approval is obtained, and repair is handed over to shop operations.
• Work closely with the Repair Development and Delivery team in Singapore, USA & other global sites, during the NPI repair development phase & industrialization.
• Manage multiple NPI projects by providing scheduling, resource management, budget control and EHS compliance.
• Lead and effectively interface with Operations, Quality, Engineering, and other support teams during NPI repair industrialization into the Shop and ensure that it meets Safety, Quality, Delivery and Productivity objectives, within schedule and budget.
• Interface with vendors and internal functions in an effective manner to ensure that the action items to be carried out for the NPI are executed on time and on budget.
• Assure that all engineering designs and technical data are completed and accurately documented to provide an accurate technical/historical base for future reference and to meet customer / end user requirements.
• Lead and participate in Lean initiatives, including continuous improvement of processes, and utilize Six Sigma tools for NPI process improvements.
• Implement new technology and/or process improvements to increase productivity of new repair processes.

Required Qualifications

• Bachelor’s degree from an accredited university in Mechanical / Aeronautical / Material or other relevant Engineering discipline with 7 years of NPI experiences.

Desired Characteristics

• Demonstrated knowledge and experience in manufacturing/repair processes and development/industrialization of aircraft engine component repairs.
• Good understanding of manufacturing and inspection tools and processes used in the repair industry, such as heat treat, thermal spray, peening, welding, brazing, machining, etc.
• Good knowledge of blueprints, application of engine manuals and technical substantiation process.
• Knowledge of GD&T, tool/fixture design and applications in repair.
• Good time management and strong organizational skills, with ability to multi-task to meet deadlines and customer needs.
• Knowledge of Lean principles, tools and methodology.
• Humble: respectful, receptive, agile, eager to learn.
• Transparent: shares critical information, speaks with candor, contributes constructively.
• Focused: quick learner, strategically prioritizes work, committed.
• Leadership ability: strong communicator, decision-maker, collaborative.
• Problem solver: analytical-minded, challenges existing processes, critical thinker.

Reporting to the Senior Production Supervisor, the role of Production Supervisor would need to perform the following. 

General Function

• Immediate supervisor of all the production workers in the plant.
• To supervise, motivate, train new employees, maintain discipline, control manpower deployment, reduces overtime, maintains good working relationship with subordinates and to study ways to improve the section to increase high output and quality standard.
• To ensure workers carry out/follow up on instructions given

Responsibilities
 

PRODUCTION PLANT

• Record daily attendance and report to immediate supervisor of medical leave, absence, lateness, annual leave taken by the workers.
• Submit monthly attendance incentive/overtime to immediate supervisor for approval.
• Informed of unusual happenings major or minor incidents, accidents, hazardous situations or any other problems to immediate supervisor.
• Other ad-hoc duties as assigned

RAW MATERIALS

• Achieve the daily production schedule set target and ensure the appropriate stock of manufactured products for division are maintained.
• Ensure the procurement of raw materials and packing materials is sufficient to meet the requirement of the section.
• Responsible for production process control for the division.  Co-ordinate for product trouble shooting in plant, monitor change of mixing instruction procedures for product, if necessary.
• Responsible for monitoring the stock level of all materials and packing materials are properly identified, marked and stored.
• Ensure that the mixing instruction procedure materials as specified on the B.O.M. are strictly followed, correct use of machinery and equipment by operators must be supervised.
• Ensure that raw materials used by operators follow the B.O.M production sheet.  Any discrepancy must be rectified immediately.
• Ensure that raw materials stock is updated and an accurate physical count if and discrepancy is spotted.  Conduct physical count on all materials twice a year.

MACHINE MAINTENANCE

• Responsible for the maintenance of all the machineries and equipment in the plant are clean at serviceable condition.  Keep a record of all break-down and report of machinery malfunction.

SAFETY

• Ensure the plant is kept clean as good housekeeping should always be practised.
• Factory equipment, light, fans etc are switched off and all mixing vessels are emptied or valves secured, bungs intact before factory are left unattended.
• Responsible for training workers on handling chemical spillage and emergency response activities.  All new workers are to be familiarized with all aspects of safety, according to the new employee induction procedure checklist.  Upon completion of the induction, the immediate supervisor and the new employee must sign the form.
• Ensure that workers are instructed and follow the procedures as prescribed for hazardous-chemical handling
• To ensure that workers, visitors and contractors wear appropriate safety protection equipment within the factory premises.
• To ensure first aid kit is well maintained and replenished when necessary.
• To ensure that fire extinguisher, spill/chemicals and other safety equipment are well maintained and replenish when necessary
• Forms a part of safety committee.
• Ensure that workers are following safety procedures, rules and regulation. Report all incident and accident.
• Ensure all workers are adequately trained in the safe and correct use of machine and equipment in the plant.
• To submit the following reports to immediate supervisor:
  • Monthly production output
  • Overtime report including reason for working overtime
• Accurate compilation of workers’ time sheet

• Handle the Precast Concrete Production in the factory.
• Understand the design drawings and production drawings and conduct quality check.
• Liaise with all the relevant parties for production and inspection of the factory.
• Manage the Suppliers and Contractors to rectify if there are any defects prior to delivery to site.

Requirements:

• Diploma in Civil Engineering or equivalent
• At least 4 years of PPVC and/or PBU Production control experience.
• Proficient with ICTs, Digital Progress control/monitor.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Manage the manufacturing plant operations from warehousing, production, quality control, purchasing and maintenance.
• Hands on in the daily operations at the manufacturing plant.
• Implement and maintain good manufacturing standards to achieve higher efficiency, productivity and quality.
• Handle supply chain of raw materials, packaging and machinery for new and existing products.
• Create realistic workflows for plant operations to run smoothly.

Requirements:

• Diploma and above
• At least 5 years of production planning and managing production operations experience in a food manufacturing industry.
• Excellent problem-solving skills with good planning, organization and project management skills.
• Familiar with local regulation (SFA, NEA) and F&B certifications (BRC/FSSC22000).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Job Description:

1. In charge of the preparation of reagents, calibration materials, and quality control products, strictly follow SOP, keep all records in the receipt, review, and use of raw and supplementary materials, monitor the stock condition and work with procurement team to replenish accordingly.

2. Responsible for the collection and bookkeeping of raw materials, auxiliary materials, packaging materials, etc. for production.

3. Responsible for filling in production logbook to ensure that the data is true, complete and accurate.

4. Ensure production equipment, facilities and production environment can meet production process and regulatory requirements.

5. Ensure employee working environment and quality in strict accordance with the system and regulatory requirements.

6. Strictly comply with laboratory-related operation and quality management requirements.

7. Collaborate with cross-functional teams to meet projects goals with overall organizational objectives.

8. Any other ad-hoc duties or projects as required by the management team.

Job Requirements:

1. Majoring in biology, medicine, laboratory science, immunology, pharmacy or quality engineering are preferred.

2. A bachelor's degree. Fresh graduates are welcome to apply.

3. Experience in IVD, controlled environment production, quality system, R&D and etc.

4. Expertise in the operation and maintenance of lab instruments and data systems.

5. Understand the relevant requirements of the production quality system for in vitro diagnostic products.

6. Familiar with in vitro diagnostic products such as lateral flow immunoassay, PCR, Immunoassay etc.

7. Familiar with IVD product development and commercialization life cycle.

8. Systematically project management, good planning, execution and timely communication. Good presentation skills.

9. Enthusiastic, proactive, and down-to-earth work attitude, strong communication & execution ability, results driven, and a team player.

10. Meticulous and strong sense of responsibility; able to handle stress and tight schedule.

• Execute daily production activities on the production line according to work instructions, including tofu making operations.
• Ensure cleanliness and hygiene standards are maintained in the production area.

Requirements:

• PSLE and above
• At least 1 year of relevant working experience.
• Able to work in hot, humid and wet environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Role Summary

The jobholder will be part of multi-geographical (presence in 3 regions and 6 locations) and multi-disciplined team, providing support and project delivery for the SSO and Identity Management platforms in the following topics: Architecture, Project Delivery, Platform Support and Maintenance, Incident and Problem Management, Change Management, General. The candidate will also be well versed with cryptographic notions such as RSA, symmetric and asymmetric encryption, certificates and digital signatures etc.

Main Responsibilities

Architecture

• To provide architectural expertise thereby driving change and improvement in technology and process.
• To contribute to the development of the SSO and LDAP technology roadmaps.
• To liaise with CIB architecture teams in undertaking architectural reviews.
• To stay abreast of emerging technologies and technology trends.
• To automatize the process to accelerate the delivery time.

Project Delivery

• To take responsibility for the delivery of key projects around SSO and LDAP which are aligned to drive significant change within the platform.
• To work with the Application Production Support project managers in defining, designing, documenting and implanting new functionality for existing and new applications.
• To liaise with the Application Developers in low-level diagnosis of on-going issues.
• To provide subject matter expertise on SSO and IDM technologies to all business application teams.
• To act as technology evangelists for the improvement of process and technology in use for the Authentication services.

Platform Support and Maintenance

• Pro-actively monitor, manage and improve availability and performance of the production environments (from presentation and application layers to Infrastructure layers).
• Pro-actively manage the capacity of production applications.

Incident and Problem Management

• To work with partner teams to conduct analysis of major and critical incidents.
• To identify tactical or strategic improvements that can be introduced to help reduce the number of on-going incidents within the SSO and LDAP area.

Change Management

• To work within the change management framework adopted by client to ensure that all changes to the production environment are planned and executed in a controlled manner.
• To take responsibility for the quality of changes within the SSO and IDM environments, ensuring that changes raised are of sufficient standard in terms of technical and planning detail.
• Attending and sharing knowledge / updates in the Weekly Change Control Board Meetings and the Weekly Problem Management Meetings.

General

• Perform pre-assigned tasks to accomplish the function responsible for. The nature of these tasks are Change The Bank or Run The Bank.
• Work cooperatively with the other members of the team.
• Ensure adherence to processes and procedures.
• Request improvement of knowledge (training) when needed.
• Apply own initiative, within the levels of acceptable risk.
• Whenever in doubt, escalate and seek advice and guidance.
• If the nature of the position is user-facing, then all the guidelines and principles of user service mentality and behaviour should be applied.
• Escalate risks / issues to the manager of the team.
• Minimise operational failure, including but not exclusively, the risk of fraud, by helping to devise, and by implementing, sufficient regular controls.
• Ensure appropriate escalation to management and/or Permanent Control (or Compliance as appropriate) as soon as an issue is identified.
• Provide a direct contribution to the client operational permanent control framework.

Qualifications & Experience

• Bachelor’s Degree in Computer Science or relevant fields.
• At least 5 – 7 years of relevant working experience.
• Very strong analytical skills.
• Strong attention to detail.
• Structured and methodical mind-set.
• Ability to operate with demanding Senior IT Management.
• Can do attitude; look at changes as opportunities to improve.
• Team oriented and Good interpersonal and communication skills.
• High English spoken and written fluent (B2/C) in order to effectively communicate with English-speaking stakeholders.
• ITIL Foundation certificate will be desirable.
• French spoken and written will be valued in order to effectively communicate with French-speaking stakeholders. (Plus)

Essential Technical Skills

• CA Siteminder Web SSO.
• SOA security - SAML / WS-Security.
• Autoprovisioning tools such as BMC ControlSA, Sailpoint, or Forgerock.
• LDAP.
• Kerberos / SSL/TLS / PKI / GSS-API / SPNEGO.
• oAuth2, OpenIDConnect.
• IIS/WCF/WIF, WAS security models.
• Infrastructure standards for network load balancers, servers, networks and storage.
• Automation mind-set with experience in using tools like Ansible.
• Scripting skills using Python/JS or shell.
• Application Server : Good exposure in configuring and supporting web technologies such as Tomcat, Apache, nginx, IIS.
• Proven logical and methodical problem analysis and troubleshooting skills.
• Working with an industry recognised service desk and project management toolset.
• Clear communicator in both written and oral forms.

Desirable Technical Skills

• Axway Security gateway.
• SQL, Database schema.
• Authentication services for APIs.
• Exposure to Apigee API gateway.
• Knowledge of Process & Quality management, ITIL v2/v3.
• Microsoft Project, Advanced Excel, PowerPoint and Word.
• Knowledge of Atlasian Jira Task Management toolset.
• Previously used ServiceNow as a Service Desk Management product.

• Handle the machine and equipment in the factory to ensure they run smoothly and increase efficiency.
• Hands on in the daily operations at the manufacturing plant.
• Implement and maintain good manufacturing standards to achieve higher efficiency, productivity and quality.
• Create realistic workflows for plant operations to run smoothly.
• Consolidate quantitative and qualitative data for reporting and analysis.

Requirements:

• Diploma and above
• At least 3 years of experience in handling machine and equipment in a food manufacturing industry.
• Excellent problem-solving skills with good planning, organization and project management skills.
• Familiar with local regulation (SFA, NEA) and F&B certifications (BRC/FSSC22000).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

• Handle the production planning, ingredients & packaging control and supply chain.
• Hands on in the daily operations at the manufacturing plant.
• Implement and maintain good manufacturing standards to achieve higher efficiency, productivity and quality.
• Create realistic workflows for plant operations to run smoothly.

Requirements:

• Diploma and above
• At least 3 years of production planning and managing production operations experience in a food manufacturing industry.
• Excellent problem-solving skills with good planning, organization and project management skills.
• Familiar with local regulation (SFA, NEA) and F&B certifications (BRC/FSSC22000).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

• Handle the Precast Concrete Production in the factory.
• Understand the design drawings and production drawings and conduct quality check.
• Liaise with all the relevant parties for production and inspection of the factory.
• Manage the Suppliers and Contractors to rectify if there are any defects prior to delivery to site.

Requirements:

• Diploma in Civil Engineering or equivalent
• At least 4 years of PPVC and/or PBU Production control experience.
• Proficient with ICTs, Digital Progress control/monitor.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Manage the manufacturing plant operations from warehousing, production, quality control, purchasing and maintenance.
• Hands on in the daily operations at the manufacturing plant.
• Implement and maintain good manufacturing standards to achieve higher efficiency, productivity and quality.
• Handle supply chain of raw materials, packaging and machinery for new and existing products.
• Create realistic workflows for plant operations to run smoothly.

Requirements:

• Diploma and above
• At least 5 years of production planning and managing production operations experience in a food manufacturing industry.
• Excellent problem-solving skills with good planning, organization and project management skills.
• Familiar with local regulation (SFA, NEA) and F&B certifications (BRC/FSSC22000).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Sales and Program Engineer

• Working Hours: Monday-Friday [8.30am - 5.45pm]
• Location: Kaki Bukit
• Salary: $3,000-$4,500 (Can be higher if experienced)

Requirements:

• Degree/Diplomas in Mechanical / Mechatronics Engineering
• Minimum 2 to 3 years in managing and developing local/oversea Sales accounts in the Automation, Semiconductor or Consumer Electronic industries.
• Relevant technical experience in manufacturing process, automation & semiconductor industries an added advantage.
• Regional travelling is expected

Jobs Scope:

You are responsible for the sales & program management of multi- million dollars automation equipment business and providing excellent customers fulfillment, meeting quality and cost goals.

• To provide Sales Projection and Forecast
• Identify business opportunities to expand customer base
• Identify and develop potential customer to increase market share and sales revenue.
• Conducts sales calls, prepares and performs product presentations and RFQ process.
• To formalize the quotation, submission to customer and follow up.
• Develop a sales strategy plan for business expansion and attending industry events to build relationships with key prospects
• To provide leadership and organization skills in coordinating activities of various teams.
• Maintain the effective communications and coordination with customers and within the company
• To establish rapport, relationships with customers and providing excellent customers management services
• To maintain constant communication and liaison with customers on future projects

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

• Handle the machine and equipment in the factory to ensure they run smoothly and increase efficiency.
• Hands on in the daily operations at the manufacturing plant.
• Implement and maintain good manufacturing standards to achieve higher efficiency, productivity and quality.
• Create realistic workflows for plant operations to run smoothly.
• Consolidate quantitative and qualitative data for reporting and analysis.

Requirements:

• Diploma and above
• At least 3 years of experience in handling machine and equipment in a food manufacturing industry.
• Excellent problem-solving skills with good planning, organization and project management skills.
• Familiar with local regulation (SFA, NEA) and F&B certifications (BRC/FSSC22000).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

• Handle the production planning, ingredients & packaging control and supply chain.
• Hands on in the daily operations at the manufacturing plant.
• Implement and maintain good manufacturing standards to achieve higher efficiency, productivity and quality.
• Create realistic workflows for plant operations to run smoothly.

Requirements:

• Diploma and above
• At least 3 years of production planning and managing production operations experience in a food manufacturing industry.
• Excellent problem-solving skills with good planning, organization and project management skills.
• Familiar with local regulation (SFA, NEA) and F&B certifications (BRC/FSSC22000).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

We are looking for an intern for 2 months for our production arm, Prodigious. You'll be assigned to the account servicing team. You’re driven to learn and understand the job function of the client servicing team include performing fairly menial tasks which are part of client servicing scope. Ability to multi-task and follow through on projects with cross-reporting to key stakeholders.

Expectations of an Account Servicing Intern

• Responsible for administrative tasks including but not limiting to billing invoices, preparing cost estimates, quotation, writing minutes, deck beautifications etc. 
• Support supervisor in project management include updating project briefs and timeline
• Coordination work during pre and post shoot

We are a signage production company that design & manufacture signage. We are seeking to hire a workshop Production coordinator in Loyang.

Job responsiblities:

1.To work out and order raw materials for production use with supervisor.

2. To achieve weekly target of items plan to complete for the week.

3. To monitor production progress closely & prompt for next step to minimize delay.

4. To assist in QC Check with supervisor to ensure signs are of acceptable level to release for installation.

Job requirements

1. Applicants with signage experience or sheet metal works experience advantage.

2. Ability to adapt and fit in a multi culture organisation.

3. willing to work in workshop environment.

Please WhatsApp your CV to 90097956 to apply.

• Handle the machine and equipment in the factory to ensure they run smoothly and increase efficiency.
• Hands on in the daily operations at the manufacturing plant.
• Implement and maintain good manufacturing standards to achieve higher efficiency, productivity and quality.
• Create realistic workflows for plant operations to run smoothly.
• Consolidate quantitative and qualitative data for reporting and analysis.

Requirements:

• Diploma and above
• At least 3 years of experience in handling machine and equipment in a food manufacturing industry.
• Excellent problem-solving skills with good planning, organization and project management skills.
• Familiar with local regulation (SFA, NEA) and F&B certifications (BRC/FSSC22000).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303