SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an SAP ABAP Engineer to be part of our IT Department diverse team of talent. You will be responsible to maintain and develop SAP ABAP Programs.

Responsibilities:

• Perform ABAP enhancements and changes for various SAP modules and interfaces
• Ensure ERP system complies with SOX security requirement and SOX audit execution
• Provide support to end-users requirements
• Assist in troubleshooting operational issues
• Drive continuous improvement in work processes and environment to achieve assigned section/department and/or company KPI
• Mentor and coach junior staff

Requirements:

• Candidate must possess at least a Diploma or Bachelor's Degree or Professional Degree in Computer Science/ Engineering/ Information Technology or equivalent
• At least 3 years of relevant experiences in SAP ABAP programing.
• Experience in SOX audit execution will be highly preferred
• Experience in Software Development Life Cycle Process
• Experience in SAP modules will be preferred

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Automation & System Department diverse team of talent. You will be responsible to setup, configure and provide operation support to PROMIS system.

What you will be working on:

• Setup, configure and provide operation support to CIM system.
• Investigate, analyze production line operation issue, develop solution to system related problem.
• Develop technical or training material as required.
• Involve in user/vendors discussion and brainstorming session.
• Analyze requirements, design, develop and test, implement, optimize.
• Document design specifications, user acceptance test and release.
• Analyze and implement improvement opportunity to enhance CIM system in support of business strategy.
• Provide cross-functional leadership (for senior position) and vendor interaction to troubleshoot, analyze and develop solution for problem involving integrated systems.
• Provide training to enable 1st line support equipped with appropriate knowledge/skill to provide frontline operation support for production.

More about you:

• Degree in Electronic Engineering, Computer Science, Information Technology or equivalent fields
• Familiar with dot.net
• Familiar with SECS / GEM Protocol will be advantage
• Database knowledge (SQL commands, data accessing etc.)
• Familiar with SDLC (Software Development Life Cycle) process will be advantage
• Good communication and self-driven
• Familiar with Elastic Search, Kibana, Logstash will be advantage

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Associate Engineer to be part of our CMP Equipment Department diverse team of talent. You will be responsible to assist the Engineers to improve and sustain equipment performance and Cpk indices to meet operations goals

What you will be working on:

• Perform 12-hour shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production
• Perform scheduled preventive maintenance (PM) and calibration on a timely basis
• Assist Engineers in the installation and hook-up of new equipment
• Trouble-shoot equipment-related issues and minimize equipment downtime
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the Module, and constantly monitor and feedback to Engineers to improve performance of equipment to meet Module objectives
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Min 2 years of relevant working experience
• Direct experience in CMP Equipment will be advantage
• Willing to work in 12-hours shift

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Equipment Engineer to be part of our Diffusion Department diverse team of talent.

Responsibilities:

• Responsible for daily operations in the Diffusion CMP Equipment Module.
• Perform corrective & preventive maintenance on equipment to maintain good quality & productivity performance.
• Provide 24×7 support for troubleshooting equipment & problem solving in Factory operations floor.
• Maintain documentations for equipment installation, maintenance and troubleshooting procedures for reference purposes.
• Develop continuous improvement to enhance equipment reliability and cost of ownership.
• Drive innovation in factory automation, processes and systems to improve productivity.
• Coordinate, supervise & develop a team of high performance equipment engineers.

Requirements:

• Degree in Chemical/Electrical & Electronics/Materials/Mechanical/Microelectronics/Physics or equivalent
• Familiar with Mirra polishing tools and DNS Scrubber
• Highly motivated & strong team player
• Possesses good communication and interpersonal skills
• Quality 1st mindset & strong analytical, problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Associate Engineer to be part of our Diffusion WET Process Department diverse team of talent.

What you will be working on:

• Perform shift duties (12-hour shift) to support the running of Production in the module and ensure that process integrity for machines is in place for production
• Assist Engineers in the qualification and fine tuning of processes for production
• Trouble-shoot process related issues and minimize the time lots are on hold
• Monitor and improve on the qualified process using SPC and other statistical tools
• Co-ordinate with Specialists to ensure that work is carried out efficiently to meet module objectives and that SOPs are strictly followed
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the module
• Work with QA on internal audit
• Create job-files for metrology tools for production set-up, and housekeeping of files
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Able to perform 12-hour rotating shift
• Team Player

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Associate Engineer to be part of our Diffusion Implant Equipment Department diverse team of talent. You will be responsible to assist the Engineers to improve and sustain equipment performance and Cpk indices to meet operations goals

What you will be working on:

• Perform 12-hour shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production
• Perform scheduled preventive maintenance (PM) and calibration on a timely basis
• Assist Engineers in the installation and hook-up of new equipment
• Trouble-shoot equipment-related issues and minimize equipment downtime
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the Module, and constantly monitor and feedback to Engineers to improve performance of equipment to meet Module objectives
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Min 2 years of relevant working experience
• Direct experience in Implant Equipment will be advantage
• Willing to work in 12-hours shift

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You are responsible for ensuring robust infrastructure, managing servers, databases, analyzing system operations, and supporting digital transformation in semiconductor manufacturing.

Key Responsibilities:

• Supervising and managing the IT infrastructure to ensure the seamless operation of a semiconductor intelligent manufacturing.
• Leading and driving digital transformation initiatives within the organization to enhance operational efficiency and effectiveness.
• Navigating and overseeing the complexities of international IT projects, ensuring successful collaboration and cross-cultural teamwork.
• Planning, designing, and implementing Fab infrastructure system solutions.
• Performing server, storage, and database management to maintain optimal system performance and reliability.
• Conducting system operation optimization analysis to identify and implement improvements for enhanced performance.

Education Qualification & Essential Experiences:

• Bachelor’s or higher degree in Information-related Degrees
• Over three years of management experience in x86 servers and SAN storage.
• Experience in VM and Linux management.
• Proficient in Windows platform management and DB2, Oracle, or SQL database administration.

Personal Attributes:

• Must be available to travel to Taiwan for a training period lasting 6 to 9 months.
• Able to be reliable and accountable in all tasks and responsibilities.
• Have the drive to achieve goals and complete tasks independently.
• Proficient in effectively conveying information through both written and verbal communication.
• Open to taking on challenging tasks and embracing new opportunities.
• Flexible with availability after hours and skilled at handling on-call or on-site issues effectively.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Overall Job Purpose

Lead or assist a team in the development and building of CMMS databases for new or existing projects, provide support to the team(s) to ensure contractual/specification functionality and business objectives are achieved.

Take part in other activities assigned or designated by the manager relating to the current role.

Core Responsibilities

• Execution of the delivery for the CMMS Database build as per planned schedule and milestones.
• Lead and oversee work execution of a CMMS database build or data mining/gathering activity for use with a CMMS.
  Vetting on the quality of final data to be included in the CMMS build as per project specification.
• Coordination of data information requirement with EPCI group, project managers and client. Serves as the main point of contact on CMMS database project and/or remediation work.
• Identifying maintainable equipment/items to be marked for the CMMS from various sources.
• Meet with project groups in relation to data acquisition and delivery to the build team.
• Provide monthly reports on the status of assigned CMMS database build project.
• Guides and ensures database build team members follow project specification standards.
• Ensure CMMS database handover acceptance as per agreed specifications and functionality with client.
• Implementation of CMMS database remediation projects as per agreed work scope.
• Support and assist in implementation of change requests in the CMMS for the company’s internal operating assets when requested.
• To manage and update project schedules and progress diligently.
• To give feedback and suggest improvements to current CMMS database build or data mining/gathering processes.
• Ensure constant communication flow to the Information Management team and individuals involved in the project.

Educational Qualification:

• Preferable with a 4-year Bachelor Diploma in Marine or Mechanical or Electrical engineering.

Relevant Work Experience (Mandatory):

• At least 1.5 years working on CMMS plant maintenance database or from a marine vessel or onshore plant maintenance related background.
• Exposure to onshore production plant or Marine or Oil and Gas industry.
• User and operating knowledge to at least one Computerized Maintenance Management System (CMMS). E.g., SAP-PM, Maximo, NSE, AMOS, TM Master, Star Systems, etc.
• Practical exposure to data acquisition and manipulation to facilitate a secure, complete, and accurate data gathering and processing.
• Identifying tags, boundary mark ups, location and its boundaries from P&ID’s and other source materials. ***
• Able to identify maintainable equipment from tags and P&ID’s. ***

*** Mandatory requirement

Desirable Traits:

• Experience in being a member of or acted as a lead in a CMMS database building project.
• Working knowledge in reliability and maintenance analysis methodologies.
• General working knowledge on planned maintenance and project engineering specific to the oil and gas and/or marine industry.
• Familiarity with sea going vessel or onshore plant equipment and maintenance.
• Familiarity with industry standards such as ISO 9001 / 14001 / 14224.
• Strong analytical and evaluation capability.
• Excellent people management skills. Able to lead and motivate team members.
• Self-motivated with a strong drive to innovate and propose processes that will enhance work output.
• Excellent report writing and presentation skills.

Certifications:

• CMMS user training certification.

Computer Software:

• Advance Microsoft Excel operation and manipulation.
• Microsoft Office Suite operations.
• Knowledge in effective use of Microsoft Project for scheduling and planning.
• Good to have but not mandatory: Knowledge in Structured Query Language (SQL) / Python scripting / Visual Basic for Applications (VBA).

Ref ID: JT

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

At NUS, we are at the forefront of clean energy innovation, focusing on advanced technologies for sustainable hydrogen production. We are seeking a talented and experienced Membrane Specialist to join our team and contribute to the development of cutting-edge membrane solutions for hydrogen production and separation processes.

Key Responsibilities:

• Design, develop, and optimize membranes for hydrogen separation, purification, and production applications.
• Conduct research on new membrane materials (e.g., polymeric, ceramic, composite) and their application in hydrogen fuel cell and electrolysis systems.
• Oversee membrane testing, characterization (SEM, XRD, FTIR, etc.), and performance evaluations.
• Collaborate with R&D teams to scale up membrane technologies from lab to pilot and industrial scale.
• Provide technical insights into membrane degradation, durability, and efficiency improvements.
• Support cross-functional teams in the integration of membranes into hydrogen production units.
• Stay updated on the latest developments and innovations in membrane technology and hydrogen production.

Qualifications

• Ph.D. in Chemical Engineering, Material Science, or related fields with a focus on membrane technology.
• Proven experience (3+ years) in membrane design and development, specifically for gas separation or hydrogen-related applications.
• Strong understanding of hydrogen production technologies such as water electrolysis, methane reforming, or fuel cells.
• Proficiency in membrane characterization techniques (SEM, TEM, XRD, FTIR, etc.).
• Ability to collaborate effectively in a multidisciplinary team environment.
• Strong analytical, problem-solving, and project management skills.

Responsibilities:

• To assist the engineers to sustain and improve all equipment performance indices to meet operations goals.
• Perform shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production
• Perform scheduled equipment preventive maintenance (PM), calibration and troubleshoot equipment-related problems on a timely basis to minimize equipment downtime
• Assist engineers in the installation and hook-up of new equipment
• Perform task with zero error
• Prepare consumables/preventive maintenance parts to ensure adequate provision
• Participate in continuous improvement programs to improve productivity and output quality of the Module, and constantly monitor and feedback to Engineers to improve performance of equipment to meet Module objectives
• Assist in implementing process improvement projects
• Ensure good housekeeping and safety practices in the Fab
• Safe custody of tools, equipment and other properties belonging to the Module
• Assist new associate engineers on their on-the-job-training (OJT) by acting as their buddy

Requirements:

• Diploma in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology or equivalent
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, electrical/ pneumatic/ hydraulic control system, digital principle, wafer fabrication processes, pump and vacuum system and electrical wiring system
• Good Team Player
• Good Problem-Solving skills
• Able to perform 12-hour rotating shift

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Etch diverse team of talent. You will be responsible to manage the integration of all modules' processes and the respective derivatives.

What you will be working on:

• Responsible for new Process Development and/or Process Transfer
• Process optimization for Yield and Productivity improvement
• Troubleshoot and resolve Process related issues
• Sustain and/or improve Process Capability, CpK
• Qualify and release tools for required MFG capacity
• Qualify alternate sources for Cost improvement
• Plan and execute Engineering Projects
• Continuous improvement through participation in 10k idea, LSS & BKM to create cost effective and robust processes with quality
• Setup, monitor and maintain SPC charts
• Adhere and complete necessary documentation

More about you:

• Bachelor Degree in Engineering / Science or equivalent
• 1-3 years relevant experience in Semiconductor manufacturing environment
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a EQUIPMENT ENGINEER to be paart of our ETCH DEPARTMENTdiverse team of talent. You will be responsible for equipment preventive maintenance and equipment performance indices.

What you will be working on:

• Establish systems/guidance in sustaining and improving all equipment performance indices to meet operations goals.
• Perform shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production when requested.
• Perform scheduled equipment preventive maintenance (PM), calibration and troubleshoot equipment-related problems on a timely basis to minimize equipment downtime.
• Conduct installation and hook-up of new equipment.
• Perform task with zero error.
• Establish work procedures, corrective actions and preventions
• Oversee the preparation of consumables/preventive maintenance parts to ensure adequate provision.
• Participate in continuous improvement programs to improve productivity and output quality of the Module, and constantly monitor and feedback to the team to improve performance of equipment to meet Module objectives.
• Assist in implementing and managing process improvement projects.
• Ensure good housekeeping and safety practices in the Fab.
• Safe custody of tools, equipment and other properties belonging to the Module.
• Initiate, organize, develop and lead task-force for short term problem solving and long term continuous improvement.

More About You:

• Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics or equivalent
• 2-5 years semiconductor wafer fab experience as an Equipment Engineer
• Engineering knowledge, which may include semiconductor devices theory, electronics, electrical/ pneumatic/ hydraulic control system, digital principle, wafer fabrication processes, pump and vacuum system and electrical wiring system
• Familiar with TEL Unity DRM/ ME+ Platform and Dry Strippers
• Good Team Player
• Good Analytical & Problem-Solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Associate Engineer to be part of our Photolithography Equipment diverse team of talent.

What you will be working on:

• To assist the engineers to sustain and improve all equipment performance indices to meet operations goals.
• Perform shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production.
• Perform scheduled equipment preventive maintenance (PM), calibration, troubleshooting and monitoring of equipment-related problems on a timely basis to minimize equipment downtime.
• Assist engineers in the installation and hook-up of new equipment.
• Perform task with zero error.
• Prepare consumables/preventive maintenance parts to ensure adequate provision.
• Participate in continuous improvement programs to improve productivity and output quality of the Module, and constantly monitor and feedback to Engineers to improve performance of equipment to meet Module objectives.
• Assist in implementing process improvement projects.
• Ensure good housekeeping and safety practices in the Fab.
• Safe custody of tools, equipment and other properties belonging to the Module.
• Assist new associate engineers on their on-the-job-training (OJT) by acting as their buddy.

More about you:

• Diploma in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology or equivalent
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, electrical/ pneumatic/ hydraulic control system, digital principle, wafer fabrication processes, pump and vacuum system and electrical wiring system
• Experience in TRACK ACT8/Mark8
• Good Problem-Solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

• Ensure the camera system is set up according to the production plan which include the optical, electronic special effects and autocue system.
• Perform creative camera work and able to offer alternative angles for production needs whenever required on various operational modes (i.e Tracks, Tripods, or Handheld). Knowledge in Jibs, Underwater and Steady Camera.
• Work with stakeholders during production to ensure best visuals are captured i.e. camera position, techniques and angles of shots, and ability to problem solve on the spots to ensure output quality not compromised.
• Keep up to date with industry filming methods and equipment, receptive of innovating ways of filming.

• Nitec in Electronic / Electrical Engineering or Diploma in Film Production.
• Good working knowledge of camera systems, lenses and camera support equipment.
• Preferably 3 years of related working experience.

Salary: $6,000 - $8,000 + 15 Days AL

5 Working Days, 9am-6pm(Up to change according to project)

Changi South (Between Bedok / Kembangan MRT)

Requirements:

Degree or diploma and aptitude relevant to Broadcast Engineering (specializing in Broadcast Engineering, including System / Audio Engineering / IT or any other related area).

Safety Knowledge: Good knowledge of the principles of safety at work as applied in the TV industry.

Understanding of OB Systems: Understanding of Outside Broadcast systems and environment.

Knowledge and experience of operating and troubleshooting a range of OB equipment in sound, communication, IP, etc.

Minimum 5-8 years of work experience in Outside Broadcast Environment.

Event Experience: Experience with internatinal scale events is necessary.

Job Scopes: (Before, During & After Project)

Review the operations of the Engineering Department to ensure the quality of broadcast operations meet industry standards.

Remain up-to-date with outdoor broadcast technology and equipment.

Guide the Assistant Engineers to read technical (Auto CAD) engineering drawings and plan for their training where needed.

Ensure procedure for video equipment testing and preparation is in place.

Ensure adequate processes are in place for communication / escalation of technical related problems that arise during a project.

Keep Engineering environment (Warehouse, Engineering Room and desks) clean, functional, safe and presentable.

Ensure compliance of engineering procedures with Health & Safety guidelines.

Supervise and schedule maintenance of specific categories of broadcast equipment to ensure the equipment are fully functional and well maintained (internally and externally clean/dust-free).

Monitor physical and technical quality and appearance of broadcast equipment. Prepare the maintenance & improvement report.

Plan and maintain a list of specific categories of broadcast equipment which require scheduled maintenance.

Position Overview:

The Digital Media Marketing Manager will oversee the development and implementation of digital marketing strategies to achieve our brand's objectives. This role focuses on creating, managing, and analyzing content across social media platforms, digital advertising, SEO, and other digital channels to increase brand visibility and enhance customer engagement. The Digital Media Marketing Manager will work closely with creative, analytics, and product teams to drive results.

Key Responsibilities:

1. Digital Strategy & Campaign Development:Develop and implement a comprehensive digital media strategy aligned with the company’s goals.
   Plan and manage multi-channel campaigns across paid, owned, and earned media to drive customer acquisition and retention.
   Collaborate with internal teams to create digital marketing content, including blog posts, videos, graphics, and other engaging assets.
   
2. Social Media Management:Oversee social media accounts, create engaging content, and respond to user interactions to build brand loyalty.
   Develop and execute social media strategies for platforms like Facebook, Instagram, Twitter, LinkedIn, TikTok, and others.
   Analyze engagement metrics and adapt strategies to maximize reach and impact.
   
3. Paid Media & Advertising:Manage and optimize paid advertising campaigns on platforms such as Google Ads, Facebook Ads, and other relevant channels.
   Monitor budget spend and adjust campaigns to achieve the best ROI.
   Conduct A/B testing and apply findings to improve ad performance.
   
4. Search Engine Optimization (SEO) & Content Marketing:Optimize web content to improve organic search rankings and enhance user experience.
   Collaborate with the content team to produce SEO-friendly blog posts, landing pages, and product descriptions.
   Track and analyze site traffic, conversions, and bounce rates to inform content strategy.
   
5. Analytics & Reporting:Utilize digital analytics tools (e.g., Google Analytics, Facebook Insights, HubSpot) to track and report on campaign performance.
   Provide actionable insights and recommendations based on data analysis to improve marketing efforts.
   Create regular reports for leadership on key metrics, ROI, and conversion rates.
   
6. Collaborations & Partnerships:Identify and develop partnerships with influencers, media partners, and digital content creators to expand brand reach.
   Coordinate joint marketing efforts with other departments, such as sales and product development.
   
7. Market Research & Trend Analysis:Stay updated on industry trends, competitor strategies, and emerging digital marketing tools and techniques.
   Conduct regular market research to understand customer behavior, preferences, and digital usage.
   
8. Team Leadership & Development:Oversee and mentor junior digital marketing team members.
   Provide training and guidance to ensure team members are aligned with the latest digital marketing practices.

Qualifications:

• Bachelor’s degree in Marketing, Digital Media, Business, or a related field.
• Proven experience (typically 3+ years) in digital marketing, preferably in a managerial role.
• Proficiency with digital marketing tools (e.g., Google Analytics, Facebook Business Manager, SEO software).
• Strong knowledge of social media platforms, digital advertising, SEO, and content marketing.

RESPONSIBILITIES

• The role involves planning, coordinating, and implementing standards development projects under the national standardization programme administered by Enterprise Singapore.
• Provide secretariat support to the Technical Committees and Working Groups. This includes preparation of agendas, meeting minutes, report compilation, drafting of standards, etc.
• Engage and coordinate with the industry, academia, and government organizations to facilitate the development, promotion, and review of Singapore Standards and Technical References.
• Organizing key standard launches events and other outreach events.
• Collaborate with key stakeholders to identify, develop, and launch new standards. This includes conducting consultations and ensuring that standards are aligned with industry needs.
• Assist in the industry and technical research for the development of new/review of standards. Conduct verification studies to identify users of the standards.
• Handle inquiries regarding standards in your area of responsibility, ensuring prompt and accurate responses to stakeholders.

Requirements

• Minimum Diploma qualification/ Fresh gradustes are welcome to apply
• Preferably with at least three (3) years of relevant work experience in safety or manufacturing related field
• Preferably with secretariat experience
• Min. 3 years of experience in quality, safety or manufacturing industry is advantageous
• Results-oriented and able to manage and execute projects in a team and independently.
• Possess good interpersonal skills and work well with various stakeholders
• Good writing and communication skills.
• Proficiency in Microsoft Word, Excel, PowerPoint, and other productivity tools

Job Description:

• Responsible for the execution of the Static Equipment Integrity Coordination scope of work, focusing in the Integrity Management Process of the equipment controlled by the MODEC's Own Service of Equipment Inspection,predictive maintenance, process performance and condition monitoring, quality assurance and quality control of subcontractors, and development and improvement of preventive and predictive maintenance plans, in order to ensure and maximize assets reliability, availability, maintainability, safety and integrity (RAMSI), as well as contributing to the Operations procedures and results achievement, established for the business.
• Support the MdB's corporate annual budget planning (expenses and investments), by providing information based on previous experiences, technical knowledge, and best practices of the market.
• Contribute to continuous improvement of IMS by following up and filling in projects status and updating and monitoring the implementation of IMS Documents under Static Equipment Integrity Coordination and maintaining the equipment master list updated.
• Participate in risk analysis workshops and safety reviews to contribute with Integrity engineering expertise and support the Operations team.
• Contribute to the attendance to the maintenance and equipment inspection policies, regarding to the Reliability Engineering, by applying the guidelines and lessons learned from the Technical management.
• Monitor process safety barriers' KPIs and provide technical recommendation, when necessary, to ensure the
• effectiveness of process safety barriers to maintain the facility's operation within ALARP level. Furthermore, it is extremely important to ensure the verification of the safety devices as safety valves, rupture discs, flare, etc., based on written procedures, in order to ensure safe condition for operation of equipment.
• Elaborate technical recommendations or actions plans to meet the Operations needs and feedbacks of the Technical management, Fleet maintenance support, subcontractors, and Operations areas.
• Contribute to effective planning and monitoring of shutdown and decommissioning (equipment and offshore unit) plans by defining the shutdown scope (equipment list, NDT exam, tests, measurements, replacements, repairs, or modifications to be carried out) related to controlled equipment, through legal compliance and integrity evaluation.
• Organize the activities related to NR 13 / SPIE together with the Equipment Inspectors from the Offshore Units, by including files and documentation, such as official books, calibration certificates, internal and external inspections, inspection reports, hydro-test and carrying out audit in the manufacturers.
• Ensure the proper register of all Pressure Vessels, PSV, Boilers and all others static equipment by developing datasheets and inspections reports and filling in the integrity management software (SGI) with reliable and updated data on this equipment.
• Contribute to fleet performance improvement by constantly cooperating with other Tiers and Modec entities, to absorb and apply all lessons learnt from other Unit Phases (Commissioning, Operation, Maintenance, Decommissioning) for the new vessels in construction, as well as provide new lessons learnt and improvement opportunities discovered during the Pre-Ops project.
• Sporadic follow ups in the shipyard during the Construction Phase and visits to vendors' factories might be required for these activities.

Qualifications & Experience:

• Bachelor's degree of Mechanical or Naval Engineering is required for SPIE.
• CREA is required. Certification as Welding Inspector (SNQC) IS-N2 is a competitive edge.
• Engineer JR: 2 years of overall experience is expected. Previous experience in Offshore/Onshore Oil & Gas area is a competitive edge. Previous experience in integrity management, implementation / maintenance of SPIE and ISO certificates, and failures analysis is a competitive edge. Previous experience as part of a SPIE technical group is a competitive edge.
• Engineer Full: minimum 4 years of overall experience is expected. Previous experience in Offshore/Onshore Oil & Gas area is a competitive edge. Previous experience in integrity management, implementation / maintenance of SPIE and ISO certificates, and failures analysis is a competitive edge. Previous experience as part of a SPIE technical group is a competitive edge.

• can work on publick holidays
• can work on shifts/change of shifts
• can work and stand for long hours
• at least 10 years experiences
• have relavant certificates
• 
  
• Provide overall supervision of production activities.
• Plan, organize and lead a team of production workers to achieve production target and output, cycle time, and yield.
• Improvement in maintaining product quality and productivity. Provide a guideline to check on processes thereby assuring that work is done by the operators.
• Monitor the daily efficiency status of the line.
• Ensure good housekeeping and safety at the workplace.
• Oversee hiring and training of food production personnel
• Perform other duties as assigned.

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

• Live studio direct News & Current Affairs programmes in both automated and traditional galleries. Content is not limited to broadcast content. May be required to support digital from time to time.
• This position is responsible for the execution of live studio programming using a Vizrt Mosart Automation system. The responsibilities include but are not limited to using studio equipment to build effects and templates for coding and execution of studio shows via Octopus rundowns.
• Co-ordinate the planning and production of News and Current Affairs programmes output to ensure that editorial intentions are met, and highest production standards maintained. The individual will be equipped with the right skills and new/developing tools to deliver high quality production.
• Set the direction and work with studio crew on duties on the requirements to facilitate and execute an error-free studio production.
• Work primarily in the studio but occasionally will be needed in the field for outdoor news broadcast.
• In the fast paced nature of news, the individual is required to provide guidance to the studio and production crew on the last minute changes and issues that may happen on during production.
• Enforce the compliance to the Error Tracking System from both the production and maintenance team.

• Minimum Diploma in relevant discipline
• At least 2 years in production, preferably studio/live production but other production acceptable as well.
• Must be able to work in a high-pressure environment and able to react to changes and situations in a calm and collected manner, without supervison.
• Multitasking is required in the role as well as strong people interpersonal skills.
• Proficient in planning, organising and communicating to be able to manage multiple issues that may occur during production as well as the stakeholders from various teams. Required to have an eye for detail and ability to make decisions under pressure.
• Experience with studio production with a strong understanding of studio equipment, including switchers and audio board will be an added advantage.
• Proficiency in the English language and at least one other language (Chinese Tamil or Malay) would be an added advantage to understand the language of the programmes.
• A good team player and must be willing to work nights, on irregular shift including weekends and public holidays.

Job Description:

• Responsible for ensuring that the Electrical Integrity Inspection scope of work is executed with technical excellence, acting as a technical reference and local legal representative, focusing on the Electrical Integrity Management Process, ensuring the execution of inspections, generation of recommendations, quality assurance and quality control of subcontractors, and development and improvement of inspection plans, in order to maximize reliability, availability, maintenance, safety and integrity of assets (RAMSI), as well as contributing to the Operations procedures and achievement of results established for the business.
• Support MdB's annual corporate budget planning (expenses and investments) by participating and advising the team on corporate planning, providing information on workforce planning for Electrical Integrity Inspection and on resource needs, services and materials and other expenses used in its activities.
• Guarantee the continuous improvement of IMS by monitoring projects status and ensuring that IMS Documents under Reliability Coordination are updated and implemented.
• Reference to assist in the analysis of inspection results, traceability of information, proper root cause elaboration, and issuance of technical review/recommendation.

Education & Experience:

• Minimum 12 year experience operating with Oil and Gas industry
• Minimum 18 year experience working as Electrical Engineer
• Experience with FPSO is preferred
• Bachelor in Engineering

Job Title: Senior Producer – Post Production

Location: SINGAPORE
Employment Type: Full-Time

About Us:
We’re a team of creators, storytellers and innovators, focused on crafting groundbreaking content across TV, film, and digital platforms. We thrive in a fast-paced, entrepreneurial environment where ideas and getting things done matter, and results speak for themselves. If you’re a self-starter who is passionate about post production, with strong people skills and a knack for sales, we want you to join us in shaping the future of entertainment.

Why You’ll Love It Here:
We empower our team to think different and take ownership. Whether you’re going after a new deal or managing client relationships, we want you to lead and we will provide the support. With us, you’ll work on projects that challenge you creatively while giving you room to innovate. If you have an independent and entrepreneurial spirit, and thrive in collaborative environments, this is your opportunity to make a real impact.

What You’ll Do:
You’ll be overseeing projects in post, making hires, managing relationships with clients and driving sales growth for our services. You’ll play a key role in both creative execution and client satisfaction, ensuring every project meets the highest standards from start to finish.

Key Responsibilities:

• Lead post-production efforts, managing all phases from editing to final delivery.
• Be the primary point of contact for clients, managing relationships, understanding their vision, and ensuring seamless communication throughout the project lifecycle.
• Develop sales strategies to grow post-production services, identify new business opportunities, and actively seek potential clients.
• Oversee budgets and timelines, ensuring all deliverables are on schedule and within scope.
• Foster strong communication between creative teams and clients to ensure a smooth, efficient workflow.
• Drive client satisfaction by delivering high-quality results and anticipating their needs.
• Troubleshoot any technical or creative challenges that arise during post-production.
• Stay ahead of industry trends, post-production tools, and new technology to keep our services cutting-edge.

What We’re Looking For:

• A self-starter with at least 5 years of experience in post-production management and client relations in TV/film.
• Strong sales experience—comfortable identifying opportunities, pitching services, and closing deals.
• Proven experience managing client relationships and ensuring high levels of client satisfaction.
• Great knowledge of post-production workflows, including editing, VFX, sound, and color grading.
• Proficiency in software like Adobe Premiere, Avid, and DaVinci Resolve.
• Excellent organizational and multitasking skills—you thrive in a fast-paced environment.
• Ability to balance creative vision with client needs while keeping projects on time and within budget.
• Strong leadership and communication skills, with a talent for building collaborative, high-performing teams.

What We Offer:

• Competitive salary plus commission for new business brought in.
• Opportunity to grow sales within a dynamic and rapidly expanding company.
• A fun, entrepreneurial culture that values bold ideas and collaboration.
• Access to state-of-the-art post-production tools and software.
• Ongoing professional development opportunities—grow your skills while growing our business.
• Inclusive and supportive workplace culture where your contributions are recognized.

How to Apply:

Send us your resume, reel, and a cover letter outlining how you’ll elevate our post-production services and help us grow our business.

At BHP x SLS, We are committed to creating an inclusive, diverse, and welcoming workplace for all.

Salary: $2600-$3000

Industry: Engineering

Located at Chai Chee

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Perform, document internal audits and other quality assurance activities to ensure readiness on international standards certification audits and GMP inspection.
• Create, review work instructions and standard operating procedures, devise sampling procedures and directions for recording and reporting quality data.
• Communicating with other team members to solve problems.
• Conduct / perform training to employees to improve GMP / international standards certification awareness and compliance.
• Other duties as and when assigned by management.

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Responsibilities:

• Manage customer relationship on a Global basis and will act as the key escalation point globally for all product programs, projects, and operational performance issues.
• Facilitate collaborative communication between all functional areas within a location / business group/vertically integrated organization.
• Facilitate external two-way communication between Customer and Flex Sites.
• Manage the process to ensure Customers expectations are clearly defined, understood, and communicated across the appropriate Flex Organizations
• Work with Operations globally to ensure the appropriate Project Managers and project resources are assigned to all customer projects
• Accountable for supporting the performance of Project team(s) and Project manager(s)
• Provide the necessary leadership and support to Project Managers to manage projects in line with project management processes and associated policies and procedures.
• Ensure collaborative cross-functional project team participation to effectively initiate, plan, execute, monitor, and control all phases of a project or subproject to ensure work efforts are executed on time, within budget, and according to stated requirements reliably and repeatedly.

Requirements:

• Bachelor’s Degree in Engineering, Sciences or Business; MBA is preferred.
• Typically requires 10 years of progressively advancing account management and/or business development experience.
• Demonstrated experience in working within cloud, enterprise, compute customers as a Program Manager or Global Program Manager.
• Experience building relationships while working directly with customers.
• Experience managing a local team and Experience with Finance/Quoting.
• Ability to Travel & Work non-traditional hours.

Responsibilities:

1.Production Operation:

Operate and oversee food production equipment during scheduled night shifts, weekends, and public holidays to ensure seamless production processes.

2.Quality Assurance:

Conduct quality checks on raw materials, intermediate stages, and finished products to uphold quality standards during non-standard work hours.

3.Equipment Maintenance:

Perform routine maintenance and cleaning of production equipment during off-peak hours to minimize disruption to regular operations.

4.Adherence to Safety Standards:

Ensure compliance with safety protocols and regulations at all times, particularly when fewer staff members may be present during night shifts and holidays.

5.Team Collaboration:

Coordinate effectively with other team members working during overlapping shifts to maintain communication and operational continuity.

6.Problem Solving:

Troubleshoot and address any production issues promptly to minimize downtime and ensure productivity throughout non-standard work hours.

7.Record Keeping:

Maintain accurate records of production activities, quality control checks, and equipment maintenance during night shifts, weekends, and public holidays.

8.Skills and Qualifications:

Flexibility and Adaptability: Ability to adjust to non-traditional working hours and varying schedules, including night shifts, weekends, and public holidays.

9.Time Management:

Efficiently manage tasks and responsibilities within the context of a non-standard work schedule to meet production goals.

10.Attention to Detail:

Maintain high standards of quality and safety despite working during less conventional times.

11.Teamwork:

Collaborate effectively with colleagues across shifts to ensure smooth handovers and continuous operations.

Endure long hours and potential physical demands associated with night shifts and production tasks.

We appreciate your interest in joining our team. Please note that only shortlisted candidates will be notified. All resumes received will be used for recruitment purposes only.

EA License ID: 18C9520

EA Registration ID: R1765753