• Design and develop ATE (Automated Test Equipment) programs for new products, covering both production and characterization testing.
• Engage in hands-on testing debugging, conduct RMA analysis, and enhance testing solutions for both hardware and software.
• Develop a test plan for the product, including scheduling, resource needs, and overseeing project tracking and execution.

Requirements:

• Degree in Electrical/Electronics Engineering
• At least 3 years of leadership experience in ATE test program development.
• Proficient in C++/ VB, ATE testers and Chroma.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at

www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Responsibilities:

• Manage all facilities to ensure availability of essential mechanical electrical and other essential services at all times to production.
• Manage departmental financial budgeting, forecasting and ongoing expenditures
• Lead the team to plan, operate, maintain and ensure 24/7 operational readiness of essential Mechanical and Electrical (M&E), Chemical System and building services; such as chillers, power, cooling systems, Scrubbers system, DI system, Waste Water Treatment, Gas system, plumbing and sanitation, pest control, landscape and etc.
• Plan and oversee upgrading/improvement works to facilities in supporting production and offices. Oversee contract management including calling for and awarding of tenders for M&E, Chemical and building maintenance, minor works, production equipment hook-up and upgrading works.
• Ensure department operations comply with applicable outside agency rules and regulations.
• Oversee energy audit, conservation, management and implement green initiatives in driving ISO14k.
• Oversee implementation of responds plans to deal with emergency situations resulting from equipment failure, power shutdown and etc.
• Provide leadership to department, ensuring high morale, team work and ownership
• Strategic review for Facilities services to continuously add value to the processes
• Lead department to continuously improve Facilities Operational Procedures and Performance. Drive reliability and robustness of systems.
• Lead and implement facilities risk management processes to identify major risks pertaining to plant operation and activities.
• Drive and support programs such as BCP, Training, 5S
• Quality management control on all clean room environmental parameters.
• Lead the team to investigate and develop CAPA for any facilities related incident

To Qualify

• Ability to work well under pressure

If you're interested in this role, click 'apply now'

If this job isn't quite right for you but you are looking for a new position, please contact us [email protected] / +65 6645 4540 for a confidential discussion on your career.

License No: 11C3510 / EA Reg ID: R1658237

We are the makers of possible

BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it’s no small feat. It takes the imagination and passion of all of us—from design and engineering to the manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities.

Why Join Us?

A career at BD means learning and working alongside inspirational leaders and colleagues who are equally passionate and committed to fostering an inclusive, growth-centered, and rewarding culture. You will have the opportunity to help shape the trajectory of BD while leaving a legacy at the same time.

To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow and thrive. And find satisfaction in doing your part to make the world a better place.

Become a maker of possible with us!

Key Responsibilities

• Partner with operational teams to understand cost drivers and variances on plant financial performance. Train product line owners in understanding key financial concepts to drive business and operational goals.
• Responsible for the review of detailed financial performance and submission (monthly, quarterly, year-end, ASR (Annual Strategy Review), and budget) and provide insightful reports to support business decisions.
• Lead the annual budget process and cost roll up, including the preparation of standard product cost development, budgeted variances, cost center budgeting, headcount requirements, volume analysis and raw material pricing analysis.
• Establish and maintain effective working relationship with internal and external customers and gain their understanding, cooperation, and respect.
• Act as enabler to Plant Leadership team to have clear line of sight of their product line impact to the Plant performance.
• Seek continuous improvements in budgeting, forecasting, and reporting processes so that the information adds value to the operations and decision makers.
• Foster a strong team and members to excel in their areas of responsibilities, provide coaching and challenging goals.
• Responsible for the submission of quarterly projections, ASR (Annual Strategy Review), and budget in Business Planning and Consolidation tool.
• Develop & maintain adequate and effective internal controls to ensure integrity of financials and comply with Finance Policy and SOX 404 requirements.
• Act as a catalyst for change to respond appropriately to business goals.
• Safety & health accountability: Safety and health are important to BD, and we encourage the observance of all safety programs and training assigned to you. Such programs are to be attended in a timely manner to ensure that work tasks carried out are in accordance with our safety guidelines and SOPs.

Key Competencies & Requirements

• An Accountancy degree or professionally qualified, with 3-5 years or more relevant experience.
• Proficient in Microsoft Office including advanced proficiency in MS Excel skills.
• Strong system knowledge of SAP, Business Planning and Consolidation tool (BPC) & excellent grasp of manufacturing process & its impact on financial processes. Has led projects involving inter department associates.
• Ability to work effectively in a fast-paced environment and manage multiple priorities.
• Able to work in a team with other financial/accounting staff.

Click on apply if this sounds like you!

Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, gender, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status.

To learn more about BD visit: https://bd.com/career

Primary Work Location

SGP Tuas - Tuas Plant

Responsibilities

• Service, upsell and built rapport with existing customer accounts within semiconductor industry
• Create targeted marketing strategies and campaigns for specific products or product lines to solidify market presence and differentiate them from competitors.
• Formulate business plans and strategically position products in the marketplace.
• Conduct market research, keep track of competitors’ activities, and assess customer needs to inform business decisions.
• Develop pricing frameworks, collaborate with engineering, manufacturing, and sales teams to launch new products or improve existing ones.
• Prepare and negotiate pricing quotes, finalize terms, and ensure documentation is ready for order processing.
• Oversee follow-ups on outstanding accounts receivables.
• Present company product roadmaps and capabilities to customers while conveying customer technology requirements to relevant business units.
• Maintain comprehensive records of all customer engagements and develop tailored action plans with timely execution.
• Build relationships with both potential and current customers to identify and address their service needs.
• Work with business unit representatives to set the annual sales budget.

Requirements:

• Bachelor’s degree in Engineering or a related field.
• Minimum of 2 years of relevant experience within the semiconductor industry.
• Willingness to travel overseas and work extended hours on challenging sales projects.
• Excellent communication and interpersonal skills.
• Detail-oriented, organized, and a proactive team player.
• Self-motivated and capable of working independently with minimal oversight.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QXW39YVY

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Configure semiconductor devices, troubleshoot issues, and document engineering advancements.
• Create procedures for machinery assembly, assessment, and testing.
• Work with engineering and software teams to enhance system architecture.
• Partner with multidisciplinary engineers to address system challenges.

Requirements

Experience in setting up automated systems.

Proficient in electro mechatronic systems.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gehbbtfJ (EA: 94C3609/ R1219669)

• Permanent role with an established company
• Exposure to latest technology

About the company

Our Client is one of the most established company with the high tech manufacturing industry. They have a well-established presence of more than 50 years with a global footprint of more than 20 countries. With rapid expansion plan, they are now looking for a new MES System Analyst (Manufacturing Execution System) / CIM Analyst / Engineer – PROMIS to be a part of their team here in the regional headquarters.

About the job

You will be responsible for:

• Oversee, support, and maintain the MES model, including products, routes, operations, and lot movements.
• Design, develop, maintain, and continuously improve assigned Computer Integrated Manufacturing (CIM) applications and components.
• Provide 24/7 Level 2 & 3 support to ensure smooth operation of production lines.
• Collect requirements, design, develop, and deploy new versions of CIM applications.
• Document requirements and manage enhancements in the assigned area.
• Plan, coordinate, and deliver training for assigned applications.
• Work with other departments to enhance productivity, reduce errors and costs, and contribute to improvement projects as needed.

skills and experience required

As a successful applicant, you will have at least 3 years of experience in MES.

Whats on offer

This is an excellent opportunity to join an established MNC with high job stability.

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gehbbtfJ

Production Engineer

• Working hours: 5 Days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong
• East MRT)
• Salary Range: $4500 - $6000

Position Summary:
The Production Engineer is responsible for improving the production technology of the EVAL site which will be launched in second half of 2026. The Production Engineer supports the production team for identifying, investigating, and resolving production issues in technical aspects. The Production Engineer leads technology for process control (DCS, SIS), operation condition, and product quality improvement and joins project work related to production technology development and improvement. Until the startup of EVAL production line, training and learning opportunities of EVAL production technology is provided by experienced members in Company. The Production Engineer will be a member of the commissioning and startup team of new EVAL plant and is responsible for designing and optimizing the process condition and process control system (DCS) and supports other production team members to achieve safe and stable commissioning and startup of new EVAL plant.

Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Minimum Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in Chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Preferred Requirements:

• Master’s degree in chemical engineering
• Knowledge and experience in chemical process simulations (e.g. polymerization, other reaction process, distillation, drying, and so on)
• Technical understanding of polymer extrusion process
• Knowledge of DCS programming and parameter tuning (PID control)
• Experience in lean manufacturing methods (e.g. 5S, Six Sigma, Kaizen, TPM)
• High proficiency in Excel including VBA, macros, or other related software engineering tools.
• Experience with leading Capex projects
• Experience with Management of Change (MOC), Process safety assessment (PHA, HAZOP, LOPA, FMEA, QRA, etc.), and Root Cause Analysis (RCA).

Karen Lee Kai En Reg No: R22108159

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Job Description & Requirements

Our client is a global leading cloud infrastructure provider that leverages innovative technology - Hyperconverged infrastructure, HPC with CDI Architecture, AI/ML, Advanced Cooling - to help worldwide customers meet their needs for sophisticated data center operation.

Duration: 1 year contract
Location: East
Working days; 5 days Monday to Friday
Working hours: Shift A (7am to 3pm), Shift B (3pm to 11pm), Shift C - Only available from 2025 onwards (11pm to 7am)
Salary: $110 per day, $6 (PM Shift), $17 (Night Shift)
Bonus: $1,400 for every 6 months completed; payout twice for 1 year contract

Roles and Responsibilities:

• Provide support on daily production activities in warehouse environment
• Assembly of components
• Perform cycle count and house keeping
• Inspecting finished products for quality assurance
• Any ad-hoc duties as assigned

Job Requirements:

• Min 1 years of relevant experience
• At least Primary / Secondary education
• Good working attitude and willing to learn
• Able to perform overtime as and when required

Responsibilities:

· Deliver a 1st class Production Support service to the company's Channel’s stakeholders

· Responsible for availability, incident, problem and capacity management for the applications in scope

· Response and resolve incidents, problem and user queries through proper analysis

· Manage communication for Incidents (SLA breaches, Application Major Incidents, Logistics issue) and responsible for communications within team, manager and department

· Drive technical remediation in line with agreed non-functional requirements

· Evidence continual service improvement of processes and tasks (via automation)

· Ensures essential process / procedures are followed and contribute to defining standards.

· Coach and be receptive to coaching to uplift the team’s and your individual knowledge

· Communicate complex technical issues to business users in a language they understand

· Contribute in effective knowledge management best practices within team and organization

· Work closely with 1st & 3rd level support and development teams to the incidents, problem and users queries are resolved within SLA

Requirements:

Education:

· Bachelors’ Degree in Computer Science or related field.

· At least 6 years’ relevant experience preferably in a Finance Institution.

Essential:

· 5 + years of experience working in Banking IT industry support. Experience in Microsoft Dynamics CRM and Siebel CRM applications.

· Strong team player. Flexible and being able to manage time effectively.

· Able to work with sense of urgency under multiple deadlines and successfully organize and complete tasks with minimal supervision.

· Experience in L2 / L3 support in a Production Support group in a high availability / mission critical environment.

· Strong understanding of ITIL methodology

Key Domain/ Technical Skills:

(Indicate up to 3 areas)

· 5+ years of experience with Distributed Technologies – Microsoft Dynamics CRM, MS SQL Server, Unix, MQ, Oracle.

· Strong working experience in Microsoft Dynamics CRM application production support

· Strong understanding of Microsoft Dynamics CRM application architecture

· Excellent troubleshooting skills in Control-m batch issues, SSIS packages

· Strong automation skills (Unix Shell scripting / windows batch scripting or any other scripting language)

· Hands-On experience in writing / debugging scripts, code, and database queries

· Software Engineering & Change Management

· Solid understanding and execution of DR & BCP

· Good experience in Middleware MQ / BMC / Control-M/Remedy incident Management tools

· Competent in Microsoft Excel, PowerPoint and Word document

Production Test Manager

Working Location: Tai Seng
Working Days:5days (office hours)
Salary Range:$10,000 – $12,000

Job Requirement:

• ATE Test Program Design and Development for new products (Production and Characterization Test)
• Design/Develop Final Test Loadboard and Wafersort Probecard
• Perform Characterization Testing, prepare test specifications, define tests, conditions, criteria, etc.
• Solid digital and mixed-signal programming experience on ATE using C++/VB language, and scripting
• Monitor and manage production test yields, maverick lots, engineering lots, product test log maintenance, product data statistical process, characterization data process.
• Hands-on test debugging, RMA analysis, and improving test solutions (Hardware and Software)
• Establish cost-effective production test solutions
• Develop team technical competency.
• Build product test plan, schedule, resources requirement and project tracking and execution.
• Conduct product test and releases review, approve the test program releases.
• Maintain and improve the product test process.

Job Requirement:

• Minimum Bachelor's Degree in Engineering (Electrical/Electronics)
• Minimum 5-yrs ATE Test Program Development (C++ and/or VB)
• Experience in Test HW Development (Loadboard and Probecard)
• Good knowledge on manufacturing process (fab, packaging, test)
• Hands-on development experience is a must with Teradyne J750 ATE testers, IG-XL test programming
• Hands-on development experience with Chroma and other main stream testers.
• Project management skills and experience in people management.
• Preferred: Knowledge in AEC Q100 automotive qualification guidelines, experience in the automotive test flow, AEC Q100 data analysis, wafer and FT lot process.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• Responsible for materials planning based on production demand.
• Monitor material shortages and ensure material availability to support production plan.
• Plan production schedule to meet delivery requirement.

Requirements:

• Diploma in Manufacturing/Production/Electronics Engineering
• At least 2 years of experience in electronics manufacturing industry
• Good knowledge in ERP/MRP system

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Position Title: Factory Supervisor (Seafood Factory)

• Working Day: Mon - Fri (7am – 430pm)
• Working Location: Fishery Port Rd (Boon Lay Area)
• Salary: $2,800 - $3,000 + AWS + Bonus

Requirement

• Must have relevant production supervisory experience and preferably in food manufacturing industry
• Able to commit OT during weekend and when required

Job Responsibilities

• Overseeing daily operations at the factory and assign manpower
• Provide hands-on support, establish standard work, and track performance metrics.
• Implementing and maintaining good manufacturing standards to achieve higher efficiency, productivity and quality
• Resolving potential production issues and coordinating activities alongside the team on a timely basis
• Maintains quality service by establishing and enforcing production standards
• Oversee inventory levels of seafood raw materials, ingredients, and finished products, and develop inventory management strategies to optimize inventory turnover and minimize waste.
• Lead and train new team member
• Perform any other ad-hoc tasks to be assigned by management from time to time.
• Maintain service schedule of equipment / machine
• Conduct daily briefings on work expectations
• Able load heavy goods (approx. 20kgs)

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

• Handle the Precast Concrete Production in the factory.
• Understand the design drawings and production drawings and conduct quality check.
• Liaise with all the relevant parties for production and inspection of the factory.
• Manage the Suppliers and Contractors to rectify if there are any defects prior to delivery to site.

Requirements:

• Diploma in Civil Engineering or equivalent
• At least 4 years of PPVC and/or PBU Production control experience.
• Proficient with ICTs, Digital Progress control/monitor.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client is specialized in the production and distribution of disposable medical devices.

• Perform technical support for daily manufacturing operation.
• Ensure all equipment are well maintained.
• Assists in machine and equipment improvement and upgrade.

Requirements:

• Nitec in Engineering or equivalent
• At least 3 years of troubleshooting equipment failure and handling technical issues experience in cGMP manufacturing environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

THE COMPANY
Our client, a global leader in the pharmaceutical industry, is seeking a Manufacturing Biotechnologist to join their expanding team in Singapore. This position will report directly to the Production Manager.

THE ROLE
As a Manufacturing Biotechnologist, your responsibilities will include:

• Developing and scaling up bioprocesses for biologics production, ensuring optimal efficiency and quality.
• Collaborating with engineering teams to refine upstream (cell culture) and downstream (purification) processes.
• Ensuring all experiments and manufacturing procedures comply with Good Manufacturing Practices (GMP) and regulatory standards (e.g., FDA, EMA).
• Mentoring junior scientists or technicians and managing laboratory operations as needed.

QUALIFICATIONS

• A bachelor's degree in Biotechnology, Biochemistry, Microbiology, Molecular Biology, or a related discipline.
• A minimum of 3 years’ experience in pharmaceutical biotechnology, biologics production, or a related field.

If you are interested to explore this opportunity, you may send your updated CV to me at [email protected].

We thank you for your interest in this position. Due to the anticipated overwhelming responses, we regret that only successfully shortlisted applicants will be contacted.

Heny Lim
EA No.: R22105263
Hudson Global Resources (Singapore) Pte Ltd
EA Licence: 23C2056

Our client is a global leading cloud infrastructure provider that leverages innovative technology - Hyperconverged infrastructure, HPC with CDI Architecture, AI/ML, Advanced Cooling - to help worldwide customers meet their needs for sophisticated data center operation.

Duration: 6 months (Renewable & Convertible to perm)
Location: Tampines
Working days: 5 days, Monday to Friday
Working hours: 11pm to 7am
Salary: $110 per night; Shift Allowance provided ($17 per night shift)
Bonus: $300 (after 3 months); $500 bonus (after 6 months)
OT Payable

Roles and Responsibilities:

• Receiving, transferring and dispatching parts / materials
• Examine incoming parts / materials for damage / shortages and take necessary action
• Report any errors or faults of products / goals to superiors
• Assemble the products to the required specifications and standards
• Other related tasks when required

Requirements:

• Min. Primary / Secondary School qualification
• 1 to 2 years of relevant production experience / relevant industries preferred

Interested candidates, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile > https://go.persolkelly.com/job/apply/9195

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394

• Reg. R24124631 (Moh Cheng' En, Desean)

Position: Purchasing Assistant

• Location: Woodlands Link
• Working Day: Mon to Fri (830am to 530pm)
• Salary: $2400 - $2800

Requirements:

• Possesed Certificate in Logistics/Supply Chain Management or equivalent
• Min 1 year in food manufacturing environment

Job Tasks:

1. Create a Purchase Order
2. Keep track of orders to ensure timely delivery
3. Coordinate with internal divisions to ensure the quantity and quality of received items
4. Verify vendor’s invoice with purchase order and delivery order
5. Discuss product quality concerns and any other inconsistencies with suppliers.
6. Monitor warehouse stock inventory level to ensure sufficient stock available
7. Maintain updated records of suppliers, goods, costs, and lead times.
8. Communicate with suppliers on documentation like (MSDS, product spec, etc.)
9. Conduct a weekly inventory check
10. Participate in the Annual Stocktake
11. Any ad hoc duties assigned by the Superior

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Position: Production Engineer / Executive

• Location: Tanjong Penjuru
• Working hours: Mon to Fri from 7:30am to 5pm
• Salary: $3,500 - $4,000

Requirements:

• Min 5 years working experience in manufacturing environment.
• Able to supervise and lead the subordinates.
• Computer literate.
• Knowledge in ISO is an advantage.
• Diploma or Degree in Manufacturing / Electrical /Mechanical / Engineering discipline

Responsibilities:

• Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.
• Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.
• Work with the HR Department and assure that employee grievances are addressed in a timely fashion.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the maintenance technicians and engineering staff.
• Maintain and ensure work safety and practice. Also continually improve safety records by addressing both physical safety issues and employee safety attitudes.
• Maintain and improve housekeeping in all areas
• Evaluate, train and maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.
• Ensure on time submission of overtime record to HR Dept for computation of monthly salary
• Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.
• Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.
• Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.
• Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.
• Assist in the hiring of production personnel.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.
• Maintain and update operating training manuals for all manufacturing processes.
• Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Configure semiconductor devices, troubleshoot issues, and document engineering advancements.
• Create procedures for machinery assembly, assessment, and testing.
• Work with engineering and software teams to enhance system architecture.
• Partner with multidisciplinary engineers to address system challenges.

Requirements

Experience in setting up automated systems.

Proficient in electro mechatronic systems.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Position: Production Operator (Fabricator / CNC)

• Working Hour: Mon - Sat (5.5 days) 8.45am – 6.45pm & 8.45am – 2.15pm
• Working Location: Woodlands Industrial Park
• Salary: $1,700 - $2,100

Job Requirements

• Experience with proper and safe use of tools utilized in fabrication preferred.
• Can read and work from drawings and diagrams created manually or from a CAD program.
• Possess craftsman ability to use portable power tools and hand tools to cut, grind, shape, and polish various types of stone products.
• Prior experience with CNC machines will be an advantage.
• Basic knowledge and prior experience of stone surfaces will be an advantage.
• Working knowledge of the use of different products and solvents such as various types of adhesive glues, acetone, and denatured alcohol used for fabrication will be an advantage.
• Able to carry heavy weight items up to 20kg
• Able to do basic mathematical calculations.

Job Description

• Cut big slabs to size by operating bridge-cutting machines.
• Operate profiling/polishing machines.
• Cut and polish sink holes to templates.
• Grind and polish edges with portable power tools.
• Color match various types of resin glues to match stones.
• Seal natural stones such as Granite after fabrication.
• Self-inspect work upon completion.
• Cleaning of equipment and workstation after work.
• Work closely with co-workers, leaders and Production Supervisor to fulfil all job requirements, production and quality standards.

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

• Working Location: Tai Seng
• Working Days: 5 days (office hours)
• Salary Range: $10,000 – $12,000

Requirement:

• ATE Test Program Design and Development for new products (Production and Characterization Test)
• Design/Develop Final Test Loadboard and Wafersort Probecard
• Perform Characterization Testing, prepare test specifications, define tests, conditions, criteria, etc.
• Solid digital and mixed-signal programming experience on ATE using C++/VB language, and scripting
• Monitor and manage production test yields, maverick lots, engineering lots, product test log maintenance, product data statistical process, characterization data process.
• Hands-on test debugging, RMA analysis, and improving test solutions (Hardware and Software)
• Establish cost-effective production test solutions
• Develop team technical competency.
• Build product test plan, schedule, resources requirement and project tracking and execution.
• Conduct product test and releases review, approve the test program releases.
• Maintain and improve the product test process.

Requirements:

• Minimum Bachelor's Degree in Engineering (Electrical/Electronics)
• Minimum 5-yrs ATE Test Program Development (C++ and/or VB)
• Experience in Test HW Development (Loadboard and Probecard)
• Good knowledge on manufacturing process (fab, packaging, test)
• Hands-on development experience is a must with Teradyne J750 ATE testers, IG-XL test programming
• Hands-on development experience with Chroma and other main stream testers.
• Project management skills and experience in people management.
• Preferred: Knowledge in AEC Q100 automotive qualification guidelines, experience in the automotive test flow, AEC Q100 data analysis, wafer and FT lot process.

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

• Working Location:Tai Seng
• Working Days:5days (office hours)
• Salary Range:$10,000 – $12,000
  
  Job Requirement:
• ATE Test Program Design and Development for new products (Production and Characterization Test)
• Design/Develop Final Test Loadboard and Wafersort Probecard
• Perform Characterization Testing, prepare test specifications, define tests, conditions, criteria, etc.
• Solid digital and mixed-signal programming experience on ATE using C++/VB language, and scripting
• Monitor and manage production test yields, maverick lots, engineering lots, product test log maintenance, product data statistical process, characterization data process.
• Hands-on test debugging, RMA analysis, and improving test solutions (Hardware and Software)
• Establish cost-effective production test solutions
• Develop team technical competency.
• Build product test plan, schedule, resources requirement and project tracking and execution.
• Conduct product test and releases review, approve the test program releases.
• Maintain and improve the product test process.

Job Requirement:

• Minimum Bachelor's Degree in Engineering (Electrical/Electronics)
• Minimum 5-yrs ATE Test Program Development (C++ and/or VB)
• Experience in Test HW Development (Loadboard and Probecard)
• Good knowledge on manufacturing process (fab, packaging, test)
• Hands-on development experience is a must with Teradyne J750 ATE testers, IG-XL test programming
• Hands-on development experience with Chroma and other main stream testers.
• Project management skills and experience in people management.
• Preferred: Knowledge in AEC Q100 automotive qualification guidelines, experience in the automotive test flow, AEC Q100 data analysis, wafer and FT lot process.

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

Production Engineer

• Working hours: 5 Days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong East MRT)
• Salary Range: $4500 - $6000

Position Summary:
The Production Engineer is responsible for improving the production technology of the EVAL site which will be launched in second half of 2026. The Production Engineer supports the production team for identifying, investigating, and resolving production issues in technical aspects. The Production Engineer leads technology for process control (DCS, SIS), operation condition, and product quality improvement and joins project work related to production technology development and improvement. Until the startup of EVAL production line, training and learning opportunities of EVAL production technology is provided by experienced members in Company. The Production Engineer will be a member of the commissioning and startup team of new EVAL plant and is responsible for designing and optimizing the process condition and process control system (DCS) and supports other production team members to achieve safe and stable commissioning and startup of new EVAL plant.

Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Minimum Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in Chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Preferred Requirements:

• Master’s degree in chemical engineering
• Knowledge and experience in chemical process simulations (e.g. polymerization, other reaction process, distillation, drying, and so on)
• Technical understanding of polymer extrusion process
• Knowledge of DCS programming and parameter tuning (PID control)
• Experience in lean manufacturing methods (e.g. 5S, Six Sigma, Kaizen, TPM)
• High proficiency in Excel including VBA, macros, or other related software engineering tools.
• Experience with leading Capex projects
• Experience with Management of Change (MOC), Process safety assessment (PHA, HAZOP, LOPA, FMEA, QRA, etc.), and Root Cause Analysis (RCA).

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Duration: 1 year contract
Location: East
Working days; 5 days Monday to Friday
Working hours: Shift C -11pm to 7am
Salary: $110 per day, $17 (Night Shift)
Bonus: $1,400 for every 6 months completed; payout twice for 1 year contract

Roles and Responsibilities:

• Provide support on daily production activities in warehouse environment
• Assembly of components
• Perform cycle count and house keeping
• Inspecting finished products for quality assurance
• Any ad-hoc duties as assigned

Job Requirements:

• Min 1 years of relevant experience
• At least Primary / Secondary education
• Good working attitude and willing to learn
• Able to perform overtime as and when required

We regret to inform that only shortlisted candidates will be notified.

Interested candidate, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile > https://go.persolkelly.com/job/apply/9244

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394

• Reg. R24124631 (Moh Cheng' En, Desean)

Our client is a global leading cloud infrastructure provider that leverages innovative technology - Hyperconverged infrastructure, HPC with CDI Architecture, AI/ML, Advanced Cooling - to help worldwide customers meet their needs for sophisticated data center operation.

Location: East (Tampines)
Working days; 5 days Monday to Friday
Working hours:
AM shift : 7am to 3pm
PM shift : 3pm to 11pm (Shift allowance $6/day)
Night shift : 11pm to 7am (Shift allowance $17/day)

Roles and Responsibilities:

• To assist engineer to work on all process related functions to ensure an efficiency production
• To work with all internal departments to create a proper process operation flow as per customer & business requirement
• To ensure production W/I is properly maintained include SFC control process & SAP maintain process
• ECO changes & implementations.
• Participate in Kaizen activities
• To update EC masterlist & tracking
• To prepare and update Working Instruction.
• To provide trainings over W/I to production.
• To support on the NPI Process
• To support production on mass run
• Participate in ISO activities (implementation & maintain)

Requirements:

• Nitec & above qualification in engineering with at least 1-3 years of working experience in process.
• Good team player
• Ability to work with Peers, engineers, and superiors
• Able to multi-task & work under pressure
• Compliance with RBA standards

We regret to inform you that only shortlisted candidates will be notified.

Interested candidates, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile > https://go.persolkelly.com/job/apply/9198

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394

• Reg. R24124631 (Moh Cheng' En, Desean)