NPI Production Senior Supervisor

Responsibilities:

- Lead new project line set-up for new medical device products

- Develop and implement production processes

- Supervise production teams & provide mentor and support.

- Ensure quality standards and compliance

- Collaborate with cross-functional teams

Requirement:

- 5+ years of experience in medical device production

- Proven leadership and supervision skills

- Strong knowledge of industry regulations and standards (Such as ISO13485/ ISO9001, FDA audit experience)

- Excellent communication and problem-solving skills

• Continuous Service Improvement: Add value to Data Centre Operations by identifying improvement opportunities to sharpen Production stability, stakeholders experience and overall service quality.

• Identifying opportunities for automation within production processes to streamline operations and reduce manual intervention.

• Timely escalation and communication of major incidents such as escalation matrix, leading, driving, facilitating, and chairing all investigation activities.

• Being accountable for resolving the incident with workaround or permanent solution.

• Participate in troubleshooting system and network connectivity problems before escalation.

• Monitoring production metrics and performance indicators to ensure targets are met.

• Ensuring compliance with safety and regulatory standards in production.

• Other ad-hoc duties as instructed.

Good years of IT experience as Level 1 Production Operations engineer.

• Strong analytical skills: The ability to analyse production processes and identify areas for improvement and optimisation.

• Technical Proficiency: Profound knowledge of production systems issues and effective solutions to enhance operation efficiency.

• Problem-Solving Aptitude: A knack for troubleshooting production issues and devising effective solutions to enhance operational efficiency.

• Experience in Data Centre facilities, including temperature and humidity monitoring system, smoke detection and fire suppression systems, Uninterrupted Power Supply (UPS) units, CCTC, keypress units, etc. • Familiarity with AWS tools such as CloudWatch, Cloud Trail, etc would be an advantage.

• Able to work shift duties. -The shift hours are as follow:

▪ 1st shift - 7:00 am to 3:00 pm

▪ 2nd shift - 2:45 pm to 10:30 pm

▪ 3rd shift - 10:15 pm to 07:15 am

o The 8-day rotational shift pattern is as below:

▪ Two days 1st shift, followed by

▪ Two days 2nd shift, followed by

▪ Two days 3rd shift, followed by

▪ Two off days.

The Sous Chef supports the Chef de Cuisine as the culinary ambassador of the restaurant, leading the venue additional personality and soul. The position is responsible for the supervision of the overall culinary operation and for achieving and maintaining the highest standards of food quality and guest satisfaction. Main responsibilities include, but are not limited to, maximising revenue, achieving targets such as P&L Budget and forecast, marketing, staffing, quality, training and development of team members.

Primary Responsibilities

Food Quality

• To be responsible for monitoring food quality and consistency and ensures that the food presented to our guest is of the highest quality standards.
• Supervises and monitors kitchen operations, works with yield testing, product identification and that the proper rotation and labelling is followed according to guidelines and product specifications.
• Works closely with receiving and storeroom; to ensure that goods received are of the standard quality and meets hotel’s specifications.
• Constantly assesses freshness, presentation and temperature of food served.

Cost Control

• Ensures food portioning, serving, requisitions and receiving from stores are properly controlled in line with Standard Operating Procedures in order to minimise wastage.
• Updates menu recipe costing and menu planning as required, as well as for F&B promotions.

Hygiene And Sanitation

• To be responsible for personal hygiene and grooming in accordance to Raffles Hotel Singapore standards, National Environmental Agency standards and HACCP guidelines.
• Enforces the highest standards of cleanliness, hygiene and sanitation in kitchens. This includes working areas including, but not restricted to; refrigerators, freezers, ceiling, walls, floors, shelving working tables and working utensils such as carving boards, slicer, mixers, blenders, cutters, woks, pots, pans, etc.
• Ensures that all equipment is hygienically stored in its designated area.
• Ensures that all perishable items are stored quickly and efficiently, all items are utilised completely to avoid wastage and ingredients are always fresh and within its expiry date.
• Prevents using spoiled or contaminated products in any phase of food preparation. Colleagues who are ill or suffering from an infection should be not involved in the preparation or handling of food.

Management And Leadership Of The Culinary Team

• Become a mentor and role model.
• Supervises all colleague’s performance and be viewed as approachable, fair when dealing with all the Chefs on all culinary matters at all times.
• Assigns in detail specific duties to all colleagues, instructs them in their work and communicates with Executive Chef on all aspects of the kitchen management.
• Liaises with all departments to ensure correct and professional operation is conducted.  Ensures all colleagues are on time at all times and that proper disciplinary action is taken when the policies of the culinary division are not followed.
• Coordinates all outlet functions with the Executive Chef, Event Executives and Chef-In-Charge to ensure maximum efficiency and use of facilities, food and colleagues’ productivity.
• Ensures smooth and effective communication among the kitchens and with other departments.
• Compiles weekly colleagues’ schedule and submits to Chef’s Office by 12 pm every Thursday for approval. 
• Evaluates the performance of the kitchen colleagues and gives the Executive Chef any recommendations for promotions or other actions.
• Works with the Talent and Culture on hiring of colleagues and ensures that proper follow-up is done, through the entire recruitment process.
• Attends daily meetings at 10 am and all other meetings, which fall under his/her jurisdiction, follows directives given and advises Executive Chef on topics of importance.
• Attends monthly departmental meeting and communicates with the team. Follows up on projects assigned if any.
• Ensures that daily line-up is conducted within respective outlet and documented.
• Ensures that all deadlines are met consistently.
• Monitors and schedules annual leave in a timely and effective manner, with the best intent of outlet/colleagues.

Training, Learning And Development Of Culinary Team 

• Stream lines all training requirements and co-ordinates all arrangements for proper execution of instructions.
• Conducts training regularly for colleagues to develop their skills/new menu items. Records and submits monthly On-the-Job Training hours to Chef’s Office before the 15th of each month.
• Guides the departmental orientation for new hires.
• Ensures that colleagues are aware of hotel rules and regulations.
• Ensures that colleagues are trained on fire and safety, emergency procedures and hygiene.

Other Responsibilities

• Builds guest loyalty and to develop a professional relationship with local guests and regular patrons.
• Continually improves product, presentation, delivery of experience and obtains feedback from guest and patrons.
• Builds a base of long-term loyal patrons (consisting of local community, expatriates and in-house guests) through exceeding guests’ expectations. This includes but not limited to engaging with guests during their dining experience in order to gather feedback and information which will exceed their expectations. 
• To uphold Accor values of Guest Passion, Trust, Sustainable Performance, Spirit of Conquest, Innovation and Respect, when undertaking any tasks and in any internal and external interactions.
• Follows sustainable procedures and practices that supports Accor’s Corporate Social Responsibility program.
• Performs any other duties and responsibilities that may be assigned.

Qualifications and Skills:

• Able to use Photoshop and illustrator is a plus.
• Proven experience as a Printing Technician or in a similar role within the printing industry.
• Proficiency in operating and maintaining printer.
• Knowledge of different printing techniques and processes.
• Familiarity with various types of printing materials and inks.
• Ability to work independently and as part of a team.

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

•  Maintains and support quality engineering programs, standards and improvements within the organization.
•  Development, implementation and maintaining of inspection plan and inspection tools to ensure process changes for completeness, accuracy and compliance to customer/internal quality management system requirements
•  Devises sampling procedures and designs and develops forms and instructions for recording, evaluating and reporting quality and reliability data.
•  Develops and implements methods and procedures for disposition of discrepant material and devises methods to assess cost and responsibility.
•  Directs inspection team to engage in measuring, inspecting and/or testing products or parts and tabulating data concerning materials, product or process quality and reliability.
•  Executes the inspection / testing of new equipment capability
• Supervises inspection team on the inspection plan
•  Generates monthly metrics reports.
•  Supports Product Engineering and Program Management with customer interfaces as necessary on quality related issues.
•  Contributes to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets through participation of EHS programs
•  Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures

Requirement

• Diploma / Degree in Mechanical Engineering / Electromechanical Engineering / Electronics Engineering/Manufacturing Process Technology or related discipline, preferably with at least 3-5 years’ relevant experience in manufacturing environment.
• Familiarity with inspection equipment, statistical tools, Geometric Dimension and Tolerance knowledge will be an advantage
• Fresh graduates will be considered for this position

· Directs and/or coordinates electronic engineering and/or technical personnel in fabrication and design of testing and test control apparatus and equipment, or software and systems testing.
· Directs and coordinates electronic engineering activities concerned with development, procurement, installation, calibration and maintenanceof instruments, equipment and control devices required to test, telemeter and record test data.
· Determines conditions under which tests are to be conducted and sequences and phases of test operations.
· Conduct and support Validation activities on Test System/Equipment and/or process setup.
· Interfaces and confers with scientific, engineering and technical personnel to resolve testing problems such as product or system malfunctions, incomplete test data, data interpretation or coding issues.
· Analyzes and interprets test data and prepares technical reports for use by electronic or software engineering, and management personnel.
· Develops or uses computer software and hardware to conduct tests on electronic products and systems or software.
· Trains and instructs floor support, test technicians and test operators on test hardware and/or software, as well as proper problem solving techniques.
· Resolves test yield problems by performing analysis of root causes, developing and coordinating corrective action measures and monitoring improvements.
· Coordinate equipment/tester maintenance and repair support as required.
· Contribute to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets through participation of EHS programs.
· Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

Requirement

· Technical knowledge of PCBA and / or System box build
· Able to read and understand 2D drawings, schematics for components
· PC Literate: Word, Excel, Power Point, AutoCAD etc.
· CAD system basics
· Good technical and commercial communication skills. Excellent verbal and written communication skills.
· Ability to work in a customer oriented environment and work well with all internal functional areas, customers and suppliers.
Good team player

JD

· Prepare Materials CTB reports (Clear to Build)

· Liaise between the Material and Program Teams on demand management

· Work closely with production personnel to ensure zero downtime

· Work closely with warehouse/operations to ensure smooth flow of raw.

· Co-ordinate engineering changes with functional departments

· Report key metrics

· Liaise with customers on key materials issues

· Contribute to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets through participation of EHS programs.

· Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

Requirement

· Diploma/ Degree in any discipline, preferably with 2 years’ relevant experience

· MRP / SAP knowledge preferred

· Good negotiation, communication and interpersonal skills

· Good team player who is independent and self-motivated

· Ability to interpret within established procedures and practices as well as exercise independent judgment in complex situations

Job Description

As Engineer of MSB Lean Manufacturing, you will manage the implementation of Lean transformation methodologies and tools in Assembly, Test and SSD manufacturing at MSB. You will collaborate closely with site functional teams to identify, explore and implement lean methodologies and tools to drive improvements in throughput, labor productivity, yield, and cycle time performance.

Responsibilities:

• Lead the adoption and implementation of Lean methodologies and tools across Assembly, Test, and SSD manufacturing.
• Facilitate continuous improvement events across different functional teams (e.g., Kaizen, Value Stream Mapping (VSM), Projects, Workshops).
• Develop and sustain programs and systems to foster a Lean culture.
• Conduct labor productivity analyses (e.g., Touch-time, MMR, spaghetti charts) to enhance operator and technician efficiency and reduce operational errors.
• Oversee Utilization/ Overall Equipment Effectiveness (OEE) to identify key sources of losses and improvement opportunities.
• Collaborate with functional experts to identify areas for improvement through the application of Lean methodologies and tools.
• Propose Lean approaches and initiatives, including Kaizen and Continuous Improvement Projects.
• Act as the key integrator between central and site functional teams, developing, driving, and communicating progress on critical Lean improvement initiatives.
• Develop an overall view of critical initiatives and their impact on key performance indicators.
• Provide visibility on program status, including key achievements with clear ownership.
• Trigger interventions to ensure programs stay on track towards targets.
• Support regular reporting and meetings with senior leadership, including deep dives for weekly/monthly reports and ad-hoc senior management updates.

Requirements

• Bachelor’s /master’s in Industrial and system engineering, engineering management, Production & Operation Management, or related field.
• Strong project management, analytical skills and problem solving skills
• Possess good communication and interpersonal skills, with the ability to work effectively with multiple multi-functional teams.
• Knowledge of Semiconductor processes, engineering and/or manufacturing operations
• Background in Overall Equipment Effectiveness (OEE) and/or Lean manufacturing fundamentals will be beneficial

Keen on the role? Apply now!

The Production Manager will be responsible for overseeing all aspects of production operations, ensuring the efficient and timely delivery of high-quality products. This role demands expertise in production planning, team coordination, quality assurance, and continuous improvement, with a focus on maintaining Star Ark’s standard of excellence.

• Familiarity with multi-tier server architecture (Application, Web, Database).
• Hands-on experience with Oracle, SQL Server, or MariaDB.
• Proficiency in web services, including protocols like SOAP & REST.
• Knowledge of system applications such as backup software, Application Server - Jboss, Web Server - Apache, Messaging system - MQ / AMQ
• Experience in CI/CD pipeline tools like Jenkins using OpenShift cloud platform

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

1. Checking the kitchen and equipment, monitored and make sure outlet operations running efficiency
2. Make sure outlet staffs prepared food follow by policies & procedures, ensure minimise food wastage
3. Ensure staffs compliance to all safety policies & procedure
4. Monitored outlets neat & clean all the times, ensure all outlets maintaining hygiene standard
5. Plan and arrange duty roster for outlet staffs, make sure enough manpower to support operation
6. Assist in hiring new outlet staffs, handling the phone calls from candidates and process onsite interview
7. Assist in setting up new outlet or closing down outlets
8. Adhere to the company policies and procedures and comply with the Code of Conduct
9. Interact with department and team members, management, and contractors professionally and positively
10. Monitored performance of all team members, encourage good relationships, promote team spirit, and ensure effective two-way communications
11. In Coordination with HR department to arrange training sessions and refresher courses for outlet staffs
12. Provide supervision, guidance and leadership for teams to achieve sectoral goals
13. Other ad hoc duties

Key Responsibilities:

• ATE Test Program Design and Development for new products (Production and Characterization Test)
• Design/Develop Final Test Loadboard and Wafersort Probecard
• Perform Characterization Testing, prepare test specifications, define tests, conditions, criteria, etc.
• Solid digital and mixed-signal programming experience on ATE using C++/VB language, and scripting
• Monitor and manage production test yields, maverick lots, engineering lots, product test log maintenance, product data statistical process, characterization data process.
• Hands-on test debugging, RMA analysis, and improving test solutions (Hardware and Software)
• Establish cost-effective production test solutions
• Develop team technical competency.
• Build product test plan, schedule, resources requirement and project tracking and execution.
• Conduct product test and releases review, approve the test program releases.
• Maintain and improve the product test process.

Qualifications, Knowledge and Skills requirements:

• Minimum Bachelor's Degree in Engineering (Electrical/Electronics)
• Minimum 5-yrs ATE Test Program Development (C++ and/or VB)
• Experience in Test HW Development (Loadboard and Probecard)
• Good knowledge on manufacturing process (fab, packaging, test)
• Hands-on development experience is a must with Teradyne J750 ATE testers, IG-XL test programming
• Hands-on development experience with Chroma and other main stream testers.
• Project management skills and experience in people management.
• Liaison with factories in China and Taiwan is required, knowledge of Mandarin is essential

Preferred: Knowledge in AEC Q100 automotive qualification guidelines, experience in the automotive test flow, AEC Q100 data analysis, wafer and FT lot process.

* Responsible to analyze, review and approve customer ECO (Engineering Change Orders) and Implement ECO for

Engineering related.

* Responsible to develop and maintain (review and approve) Bill of Material, Work Instructions and Validation / Verification

protocol & report etc.

* Responsible to provide training to production personnel on Work Instructions.

* Attend Line quality issues and trouble shoot Engineering related issues.

* Responsible to review and approve Incident Reports, if any.

* Maintain Consigned/In-house Tooling, Jig and Fixtures and conduct PM (Preventive Maintenance) and repair support as

required.

* Coordinate with FA engineer and perform First Article qualification of parts.

* Participate in periodic Validation/Calibration activities to ensure smooth running of production line.

* Participate in LEAN activities pertaining to Cycle Time, Process, Safety and Yield improvements for Line balancing.

* Responsible for Line set-up and providing the design and method of handling, labeling and storage of KTE box and Milk-Run

Trolley.

* Other tasks as and when required and directed by Engineer.

* Contribute to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering

to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and

targets through participation of EHS programs

* Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

* Technical knowledge of Test Trouble-shooting and / or System box build Assembly

* PC Literate: Word, Excel, PowerPoint etc.

* Good technical and commercial communication skills. Excellent verbal and written communication skills.

* Good team player

• Reporting to the Kitchen Production Manager and responsible for the operations of the Kitchen production area and supporting the entire shift of Restaurant, Swedish Food Market and Bistro.
• Assist in forecasting and purchasing of food and good supply.
• Ensure an efficient operation by monitoring man-hours roster closely and supervise activities of co-workers in the Kitchen. 
• You look into waste management, portioning and kitchen production as part of a continuous effort to improve the efficiency of the operations.
• Ensure that facilities of kitchen conform to safety & sanitary regulations and HACCP standards. Ensuring food safety procedures are carry up as and when.
• Assist in menu implementation and launches.