Authorities and Responsibilities

1. To organize, co-ordinate, check and ensure all production activities follow as plan.
2. Calculate machine cycle time and organize production schedule base on machine capacity and capabilities
3. Plan manpower resources and delegate machining job to machinist
4. Verify program issue to workshop
5. Analyze and provide solution to solve problems between programmer and production dept.
6. Analyze monthly machining and scrap report
7. Good supervisory skill, people skill and 5 ‘S’ housekeeping
8. Good writing and communicating skill
9. Good in mechanical process, such as machining process, H/T, jig and fixture etc.

Competence Requirements

• Preferred NTC 2 / Diploma in Engineering discipline or equivalent.
• Minimum 3 years of working in related industry, and having 2 – 3 years of supervisory experience and preferably with working knowledge in machining processes.
• PC literate
• Possess excellent interpersonal communication skills and is an effective team player who is also self driven with a strong achievement orientation.

Task and Responsibilities

• Read and understand technical specifications, prepare job-list, work schedule, plan material take off and manpower planning of yard men and contractor for each given jobs. Report department head and update any special materials for specific project (if require more lead time or needs to purchase from overseas)
• Advance planning man and materials, including all facilities.
• Generate, Control and monitor department budgets.
• Order the material required as per material take off and co-ordinate with purchase department for timely delivery of the materials
• Cooperate with project manager on appropriate procedures and schedule to complete the job.
• Ensure safety, discipline and welfare for all subordinates.
• Carry out trade work as per specifications and to the satisfaction of the owner/class & timely completion. Ensure good quality work as per work instructions. Ensure all trade work mark-up drawings to be made and approved by owner’s representative
• Maintain good housekeeping and Safety at all times on board vessel & workshop. Ensure all workers follow safe work procedures at all times
• Responsible for minimum wastage of materials and balance material to be accounted and returned to store at the end of the project.
• Prepare, setup and review department documents (RA, SOP, Internal & External auditing, OR) with supervisor and manager
• Lead group of supervisors, fitters and sub-contractors.
• Ensuring optimum work processes and equipment utilization.
• Understand all jobs given supervise and give detail instructions to subordinates and contractors report to department engineer or department head.
• Ensure all work completion reports will be done by Ship in-charge, verify & submit to owner Rep to get sign before handing over to commercial department on time (before vessel delivery)
• Monitoring vessel daily job deployment report to achieve target on time.
• Perform other related jobs as assigned by DH.
• Ensure Permit to work system is followed strictly.
• Identify parts and components needed for repairs or replacement and to liaise with regional vendors for replacement of critical spares for vessels.

Job Requirements

3 years and above of relevant experience in ship building & Ship repair industry.

• Possesses in depth knowledge on Marine Machinery Works.
• Able to speak and write in proper English.
• Self-initiative and motivated individual.
• Possesses quality leadership skills to lead and supervise people under their charge.
• Able to give constructing advice based on their qualified experiences.

• Metal Stamping Company
• Basic $ 2500- 4000
• AWS + Variable Bonus
• Mon- Fri 0830 -1730
• Location: Pioneer
• Singaporean ONLY

Job Responsibilities

• Develop and maintain schedules based on orders, forecasts, and inventory, while coordinating with sales, marketing, and production teams.
• Conduct MRP analysis, coordinate with procurement and suppliers, and monitor inventory to ensure timely availability and optimal turnover.
• Ensure on-time deliveries by addressing bottlenecks, balancing workloads, and communicating schedules with stakeholders.
• Identify inefficiencies, implement changes to enhance productivity, and monitor KPIs for continuous improvement.
• Address potential schedule risks, develop contingency plans, and handle any ad-hoc tasks assigned by management.

Requirement :

• Preferably min 2 years experiences in related industries

For consideration, kindly submit your CV by clicking “APPLY NOW”

*Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R24124448 | Nana Yeoh Li Xuan

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

The Recruiter is responsible for Service Excellence throughout the recruitment cycle. They act as a brand ambassador for the client, focused on delivering exceptional talent while providing proactive and timely communication on the status of the search. They serve as subject matter expert in talent acquisition and provide consultative direction and industry expertise to hiring leader.    

• Work Location: Candidates must be open to work in either of the client sites: RR Solutions Asia Pte. Ltd. 10 Tukang Innovation OR 1 Seletar Aerospace Crescent
• Work Arrangement: Hybrid (3x in the client office per week)
• Work Schedule: Day shift/ APAC shift

Specific Requirements:

• Minimum of 5 years' experience in full-cycle recruiting, preferably within the engineering or advanced manufacturing sectors.
• The ideal candidate should possess strong stakeholder management skills and the ability to independently manage the entire hiring process with minimal supervision.  

Responsibilities:   

Finding Candidates:  

• Lead a detailed job scope meeting with the hiring leader to determine position specifications, providing relevant market data and recommendations on possible approaches to the search or candidate requirements.
• Review of candidates who have applied via the Applicant Tracking System (ATS).
• Evaluate candidate qualifications against position requirements and determine who to move forward in the recruitment process.
• Develop and manage recruitment marketing plans or sourcing plans to determine the most appropriate candidate sources that align to the search requirements.
• Source candidates via resume databases, search engine and networking sites using Boolean search language.
• Solicit and pursue referrals from business networks and/or internal referrals.
• Utilize Cielo’s proprietary software for mobile and email campaigning to talent communities.

Engaging Candidates:

• Use an appropriate mix of media to connect with talent communities (phone, email, social media, etc.).
• Articulate value proposition to candidates who are interested in the job opportunity.
• Prepare candidates for interviews, coaching them on logistical information, interview schedule, appropriate attire and overall expectations.
• Ensure candidates are provided with timely updates concerning the status of their applications and interviews.

Assessing Candidates:

• Draft and utilize phone interview templates appropriate to the job description.
• Use independent judgement to compare candidate phone interview notes and skills assessments with position requirements to determine if the candidate is a match for the role or a potential match for other open positions.
• Issue skills testing as needed and evaluate results (if process dictates).
• Review background and reference information (if process dictates).

Influencing the Hire:

• Keep candidates engaged throughout process, ensuring consistent communication on the status of the search.
• Partner with hiring leader to determine offer details, using market data and compensation guidelines to support recommendations.
• Articulate a job offer to candidate and drive for candidate acceptance, anticipating and negotiating counter-offers as appropriate.

Service Excellence:

• Strict adherence to all regulations (OFCCP and all other compliance standards set forth).
• Work to deliver a strong candidate slate, continuously building talent pipelines to ensure there are multiple qualified candidates in play at all times.
• Provide accurate and regular reporting of recruiting activities to the hiring leader and Cielo leadership to depict both metrics and efforts.
• Identify perceived difficulties with searches and research and recommend solutions to both internal and external stakeholders.
• Proactively and regularly communicate the status of each search to the hiring leader, providing a consultative approach with recommendations on how to move forward. 

Job duties and responsibilities:

• Lead the Production Division in formulating and implementing production business plans to achieve the company goals and objectives.
• Manage and promote the company’s core values, business objectives, and targets, including the development of supporting personnel and features for the continued growth of the company.
• Induct, train, coach, and develop human resource and succession planning for the division.
• Participate and contribute actively either as the chairman or as a member of the various committees of the company or any other company-wide gathering.
• Maintain the discipline and cohesiveness of staff under charge, working towards achieving the corporate objectives. Have a nose for recognising problems.
• Need to write to internal or external customers most effectively and concisely. Conversely, must be able to converse concisely and timely.
• Coordinate and take leadership of all the managers and assistant managers who are heads of their respective departments.
• Manage and delegate work within the division sphere.
• Lead in the management and control of budgets for jobs designated to the department.
• Led and formulated plans for the expansion and improvement of the production division.
• Oversee all production and maintenance projects to the satisfaction of the client's requirements by providing technical and management guidance to production departments.
• Ensure all production department projects are planned, coordinated, and executed smoothly to meet customers’ requirements with the highest quality and EHS compliance.
• Manage and deploy production resources (manpower, material, tools & equipment, logistics, technical, etc) efficiently and productively.
• Analyse job scope and plan resources with the department heads.
• Liaise with customers on job matters.
• Manage sub-contractors.
• Chair and conduct daily production and monthly safety committee meetings.
• Approve in-house training programmes and training materials.
• Conduct in-house training for staff and when required.
• Forecast the divisional requirements.
• Communicate and carry out the management requirements to subordinates.
• Implement the company’s IMS system for continuous improvement.
• Conduct post-project performance evaluation and identify areas for improvement.
• Ensure project costs are controlled within budget and minimize wastage.
• Continuously review and improve work methods and enhance the productivity of workers.
• Conduct an internal audit and self-assessment for IMS.
• Oversee the development of production indicators, man-hour standards, work instructions, and risk assessments.
• Act on behalf of the COO in his absence.
• Perform any other duties assigned by the COO.

Minimum Requirements:

• A Degree or Diploma in Engineering.
• Minimum 3 years experience in Engineering maintenance services
• Possess strong leadership and organisational qualities.
• Possess strong written and spoken communication skills.

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals

Role Description:

VS1

This position reports to the Production Superintendent and is an integral member of Production Shift Team. GSK is committed to an employee-orientated, high performance culture that emphasises process automation, quality compliance and continuous improvement.

Trainee to be involved in:

• To execute key process operations in accordance to established batch instructions and schedule to make APIs and intermediates as well as plant changeover
• To learn Process and Workplace Safety and cGMP knowledge for manufacturing and to demonstrate understanding during execution
• To identify opportunity for improvements and able to carry out short term improvement projects to achieve benefit
• Inspects and maintains house-keeping of his assigned area for clean and safe working conditions as well as ensuring that personal protection equipment and safety equipment are maintained ready for use.
• Perform plant trouble shooting using appropriate problem- solving tool to minimize plant stoppages and safety or quality incidents.

VS2

This position reports to the Shift Operations Superintendent and is an integral member of Operations Team. GSK is committed to an employee-orientated, high performance culture that emphasises process automation, quality compliance and continuous improvement.

Trainee will be trained to operate all API manufacturing related equipment and facilities in his assigned area in compliance with GMP and EHS requirements. Trainee to adhere to strict recording and filling of batch / manufacturing records, process safety and general housekeeping of all work areas. To provide practical processing inputs to identify opportunities for process improvement.

Trainee to be involved in:

• Involve in hands-on execution of the plant operations and assist in trouble-shooting
• Monitor and analyze processing parameters for atypical trends and improvement opportunities
• Perform raw material dispensing and equipment configuration with additional logistical support responsibility
• Prior experience with analytical instrument will be a plus point
• Actively support continuous improvement initiative
• Support quality or safety related investigation using appropriate problem-solving tool to determine the root causes and implement CAPA to prevent recurrence.
• Support Quality & Safety audits
• Adhere to any applicable EHS requirements
• Ability to adhere to regulatory requirements, written procedures and safety guidelines
• Ability to evaluate documentation/data according to company and regulatory guidelines
• Ability to interact with inspectors (internal and external)
• Ability to interpret and apply Good Manufacturing Practice (GMP) knowledge
• Basic mathematical skills
• Ability to organize work and handle multiple priorities and meet deadlines
• Ability to understand, apply and evaluate basic chemistry and physical principles

We are looking for you with below attributes:

VS1

• ITE/ Diploma in Chemical Process/ Technology/ Engineering related

VS2

• NTC/ITC/Diploma/Degree in Science or Engineering

What you will learn:

VS1

• Foundational on-the-job training experience working in cGMP and key Global Supply API manufacturing site with state of art manufacturing facilities, including first in class Continuous Manufacturing facility
• To train to be an advocate for Continuous Improvement, with introductory basics on Lean Sigma concepts and coaching by supervisors to complete practical application through completion of improvement project

VS2

• Demonstrate commitment to cGMP, EHS compliance aspects of pharmaceutical plant operation
• Excellent self-motivated team player with hands-on attitude and good communication skills
• Ability to understand, apply and evaluate basic chemistry and physical principles
• Ability and willingness to work on 12-hour shift operations

This will be a 12-hours shift work.

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Jurong.

How can I apply?

Applications are now open, please apply via this link: https://gsk.wd5.myworkdayjobs.com/GSKCareers/job/Singapore---Jurong/TnP-Trainee---Operations-Technician_379975-1

We recommend you apply as soon as possible, because we accept ongoing applications and offer positions on a first come, first served basis!

At GSK we value diversity and treat all candidates equally. We strive to make our recruitment process free of bias of any kind and aim to create an inclusive workplace at GSK. If you require any assistance, either to attend an interview or during the course of the recruitment process, please let us know

Key Responsibilities

• Lead AM materials development, manage projects involving multiple stakeholders. Use materials-process-performance research methods to investigate, solve, and deliver project objectives.
• Lead metal AM application and parts development projects including parts selection, design, prototyping and manufacturing
• Operation of metal AM machines and auxiliary equipment, including maintenance troubleshooting, and risk assessment
• Execute customer projects using AM materials and applications knowledge, to meet project deliverables and deadlines. Support in FEM simulation for DfAM.
• Provide technical support for addressing technical inquiries related to the development process, quality assurance, and analytical problems.
• Produce technical reports and presentations for AM project development

Job Requirements

• Masters/PhD in Engineering, Mechanical/Materials or equivalent
• 5-7 years of working experience with AM materials-process-performance characterization and analytical tools.
• Experience in LMD and/or L-PBF machine operations
• Proficient in 3D modelling and 2D drawing using Solidworks
• Experience in CAM and Siemens NX
• Experience in FEA/FEM
• Strong understanding of LMD process and materials, key process variables.
• Experience with parameters development, material characterization methods
• Experience with LMD machine operation
• Proficient in statistical tools like DOE
• Familiar with metal AM process chain
• Able to work independently and self-motivated

Rapsodo Inc. is a sports analytics company that uses computer vision and machine learning to help all athletes maximize their performance. Our proprietary technology applications range from helping PGA Tour golfers optimize their launch conditions to allowing MLB pitchers to increase the efficiency of their breaking balls. Current partners include all 30 MLB teams, MLB, USA Baseball, Golf Digest, PGA of America, and over 1000 NCAA athletic departments. 

New Product Introduction (NPI) is the end-to-end process of bringing a new product to the market from design concept to the end customer. It broadly encompasses the following stages of the engineering team: Lab Prototypes (LP), Production Prototypes (PP) & Production Ramp (PR). 

As an NPI Engineering Intern at Rapsodo, you will be exposed to the different stages of NPI for Rapsodo’s upcoming products to be released. You will also be exposed to the manufacturing environment of how our products are built and supported by our Research & Development (R&D) Team.

Roles & Responsibilities

• Gain invaluable exposure into Singapore’s Technology Sector 

• Be exposed to the different stages of the NPI process for Rapsodo’s upcoming products 

• Assist with building prototypes

• Provide feedback for the prototypes you build 

• Be involved in investigative study with our R&D Team 

• Be exposed to working with our Software Test Team, Purchasing Team as well as Manufacturing Team

• Pursuing Diploma in Electrical, Mechanical Engineering or any related Engineering discipline 

• Responsible, hardworking and a team player • Good attitude to learn and contribute to the team 

• Pro-active, organized & meticulous and able to work independently in a fast-paced environment 

• Have strong analytical, problem solving and inter-personal skills 

• Excellent written and oral communication skills with the ability to present ideas and results to technical and non-technical audiences

• Provide administrative support to the Senior Production Executive and overall department to ensure smooth running of the operation
• Provide training and guidance for Production Assistants
• Data entry of daily production input and output including volume produced, new material consumed, material and products on-hold/defect
• Compile information such as production rates and progress, material inventory, material used and customers' information so that status report can be completed
• Assist Manufacturing Engineer and Production Supervisor in updating production charts, checklists and data
• Assist in preparing production reports and perform simple analysis on reports
• Maintain and update departmental overtime records
• Ensure proper documentation procedures are adhered to and conform to ISO standards and requirements
• Help to coordinate stock take process

• Reports directly to the Master Scheduler
• Coordinate production workflows in the shopfloor
• Plan and prioritise operations to ensure maximum performance and minimal delay
• Plan a weekly machine loading plan and 3 months forecasted loading plan
• Determine manpower, equipment and raw materials needed to cover production demand
• Recommend to Master Scheduler on deployment of workers and other staff to meet production and delivery requirements
• Recommend shift schedule to Master Scheduler accordingly to production needs
• Liaise with Purchasing and Suppliers for material deliveries and outsourcing schedules
• Monitor jobs to ensure they will finish on time
• Address issues whenever they arise with the aim of minimal disruption
• Obtain output information (Number of finished products etc.)
• Prepare and submit status and performance
• Collaborate with Quality, Sales, Store, Engineering and other departments to ensure good production flow and coordination
• Manage and train the assistant planners and subordinates
• Any other duties assigned by the Manager

Requirements

• Diploma or further education/certificates is preferred
• Excellent knowledge of production planning and quality control principle
• Working knowledge of MS Office and ERP Systems
• Strong organisational and problem-solving skills
• Excellent communication abilities
• Able to converse in English and Mandarin
• Willing to learn and be a team player

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Summary:

• Monday - Friday
• Joo Koon
• Immediate interview arrangement

Job Responsibilities:

• Perform office administrative works to support the team.
• Managing subcon claims.
• Review price of materials purchased.
• Analysis product price.
• Any other duties as assigned by the supervisor.

Plan, organize, and lead a team of discipline engineers and staff to plan and execute maintenance operations to ensure the continuous, reliable and efficient functioning of refinery assets, equipment and infrastructure. The purpose of this role is to minimize downtime, maximize operational reliability and ensure safety and compliance with regulatory standards.

We are award-winning rope ladder manufacturer, looking for initiative and energetic guys to join us!

Job Scope:
• Main production support: Rope ladder assembly
• Supporting of daily warehouse operations

Work location: 33 Tuas Ave 2 Singapore 639463
Company provides transport pick up at Lakeside and Boon Lay MRT station

Working hours:
Monday to Friday 8:00am-5:15pm (Incl. 3 break time)
Saturday 9:30am-12:30pm (1 day per month only)

Salary: SGD 2,000-2,400 per month

We provide AWS, Annual leave, Birthday leave, Marriage leave, Compassionate leave, Childcare leave etc...

WhatsApp resume for interview booking: +65 8524 2452 (message only, no phone call)

Only Singaporean and PR can apply, thank you!!!

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Metalcool is a leader in precision engineering, dedicated to delivering innovative solutions to our valued clients. We are seeking a skilled CNC Tool Manufacturing Technician to join our team. If you are a detail-oriented individual with expertise in CNC tool grinding and a commitment to quality, we want to hear from you!

Key Responsibilities:

As a CNC Tool Manufacturing Technician, you will play a crucial role in fabricating precision metal cutting tools. Your responsibilities will include:

• CNC Tool Grinding: Operate a 5-axes CNC tool grinding machine to fabricate metal cutting tools according to job sheet requirements.
• Blueprint Interpretation: Interpret basic drawings and specifications to determine dimensions, tolerances, sequence of operations, and setup requirements.
• Quality Control: Use measuring equipment, gauges, and fixtures for accurate inspection checks to ensure the quality of tools.
• Production Records: Maintain up-to-date production records and reports, accurately documenting work performed.
• Machine Maintenance: Perform daily cleaning and light maintenance tasks on machinery and equipment to ensure optimal performance.
• Communication: Update the Production Supervisor on job status and report any non-conformance issues raised during the fabrication process.
• Compliance: Adhere to ISO requirements and safety regulations to ensure a safe and compliant working environment.
• Equipment and Work Area Maintenance: Take responsibility for keeping equipment and the work area clean and perform basic preventative maintenance functions on equipment.

Qualifications:

To excel in this role, you should possess the following qualifications:

• Proven experience in operating a 5-axes CNC tool grinding machine.
• Proficiency in interpreting technical drawings and specifications.
• Knowledge of measuring equipment, gauges, and quality control processes.
• Strong attention to detail and commitment to producing high-quality tools.
• Ability to perform basic machinery maintenance and cleaning tasks.
• Effective communication skills and a team-oriented approach.

Why Join Metalcool?

• Competitive salary and benefits package.
• Opportunity to be part of a skilled team in a dynamic and growing industry.
• Commitment to safety, quality, and compliance with industry regulations.
• Supportive and inclusive work environment that encourages professional development and growth.

If you are a detail-oriented and skilled CNC Tool Manufacturing Technician with a passion for precision engineering, we invite you to submit your application. Please include your resume and a cover letter outlining your qualifications and why you believe you would excel in this role.

Duties

• Manage daily productions and ensure efficiency of operations, including capacity planning, loading and optimization
• Monitor and day-to-day operations to ensure productivity by ERP system
• Planning and scheduling work deployments daily
• Communicate and report updates to Technical Director to review and support processes
• Development and oversight of staff appraisal and supervision systems
• Resolving performance issues among staff
• Handle customer concerns and resolving them immediately
• Ensure all machines are well maintained and coordinate servicing & repair with service team
• Develop operations-related plans, manufacturing budgets and policies & procedures to comply with ISO and AS standards.
• Review and propose new strategies to achieve better efficiency in production

Responsibilities

• Lead and direct business operations in alignment with company policies
• Manage plan changes, including internal and external communications, HR and related technical issues
• Oversee and drive the production team to meet company objectives and KPI.
• Reinforce internal policies, business planning, procedures and quality standards on all practices executed by staff
• Improve manufacturing capability, technologies and problem solving in conjunction with quality & engineering requirement
• Development of workforce plans including competency frameworks to meet operational requirements of organization
• Cultivate safeguarding against unexpected operational incidents that affect business continuity
• Undertake other tasks including administrative duties in connection with the post
• Perform ad-hoc duties as and when required
• Minimum 5 years of relevant experience in supervising in engineering production industry
• Experience in managing a workforce of 50 or more people preferred
• Advanced/Higher/Graduate Diploma/Post Graduate Diploma in Mechanical /Manufacturing Engineering field preferred
• Good interpersonal and communication skills in dealing with staff, clients and suppliers
• Efficient project management, problem solving & decision-making skills
• Takes initiative and is assertive/aggressive

Work Time Profile:

Night Shift, 6 days

Company Benefits:

• Staff Meal
• Training and Development Opportunities
• Performance Bonus
• Staff Discounts on Seafood purchases
• Medical Benefits
• Confirmation Seafood Hamper

Job Duties:

• Operate machinery and equipment for tasks such as slicing, portioning, and deshelling seafood products according to quality standards
• Conduct rigorous quality checks on processed seafood products to guarantee compliance with established quality standards
• Identify and address any deviations from quality specifications, reporting issues to the team leads promptly
• Collaborate with the Quality Check Coordinator team to maintain high-quality standards throughout the production process
• Adhere to strict safety protocols and guidelines to ensure a safe working environment
• Maintain cleanliness and hygiene in the processing area, following sanitation procedures and regulations
• Participate in regular safety training sessions and contribute to maintaining a culture of safety awareness
• Operate and monitor processing equipment efficiently and report any malfunctions or irregularities

You need to have/be:

• Be open-minded and adaptive to changes in production processes and operating procedures
• Collaborate effectively with colleagues to achieve production goals and maintain a positive working environment
• Demonstrate flexibility and willingness to assist team members when needed
• Able to follow detailed instructions and execute tasks accurately to maintain product quality
• Prioritize safety in all aspects of work, adhering to safety protocols and guidelines
• Conduct thorough quality checks on processed seafood products, identifying and addressing deviations promptly
• Possess the physical stamina and dexterity required to perform repetitive tasks in a fast-paced production environment

Summary

Identify, develop and drive strategic engineering initiatives particularly in relation to Quality, Cost, Productivity improvement. Lead NPI and Product Transfer Projects to successful completion.

Key acountabilities

• Responsible for site Engineering activities, identify and propose opportunities including Out/In-sourcing ideas, EOL management, alternate sourcing and others
• Lead NPI and Product Transfer projects to successful completion
• Initiate value engineering projects to enhance operational capabilities to meet new business needs and raise operational efficiency
• Lead material localization projects for improvements in product cost, quality and operational excellence
• Work closely with cross functional teams to understand engineering related issues in order to provide effective solutions
• Drive yield improvement, reduce COPQ and drive shopfloor productivity through automation and process enhancement
• Improve site Safety through hazard identification and prevention

Requirements

• Bachelor’s Degree in Engineering / Science disciplines
• At least 8 - 10 years of relevant experience in manufacturing engineering in Analytical instruments industry
• Experience in NPI and product transfers is preferred
• Knowledge in manufacturing process of analytical instruments such as Inductively Coupled Plasma- Optical Emission Spectroscopy (ICP-OES), Inductively Coupled Plasma- Mass Spectrometry (ICP-MS), Gas Chromatography (GC), Atomic Absorption Spectroscopy (AAS)
• Good oral and written communications
• Strong analytical and interpersonal skills
• Project Management experience and leadership skills
• Strong drive for results, balanced with effective decision making and problem-solving skills
• Lean manufacturing and Six Sigma Methodology
• Knowledge in ISO 9001, ISO14001 and ISO45001

Job Description

• Generate and prepare manufacturing work order documents
• Update daily production output, non-conforming quantities, etc which are required for department KPI compilation
• Update delivery schedule and submit to Admin for Delivery Order (DO) preparations
• Data entry into ERP for inventory and costing purposes
• General administrative support for the department where required

Job Requirements

• Min. secondary school qualifications
• Able to work independently
• Basic computer skills (eg. able to do data entry into Microsoft Excel)
• Experience in intepreting simple technical drawings is an advantage

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Responsibilities:

• Perform basic and advanced machine assembly works
• Develop mechanical testing jigs & fixtures and perform testing and validation of machines
• Lead the production team to strictly adhere to production schedule and same time improving the manufacturing process to improve quality, cost, and productivity
• Creates, implements, and monitors KPI indicators on product quality and section capability
• Provide shop floor feedback to Production Engineering and D&D Department
• Assist the Production Manager to provide quality, cost effective and efficient support for launching of new machine models
• Perform machine mechanical setting and inspection checks according to YS standard
• Able to troubleshoot and resolve machine any kind of mechanical non conformance
• Perform machine final mechanical inspection and adjustments for any defects to maintain high level of quality
• Prepare reports on productivity, quality, claims, etc
• Work with engineering and other departments to improve assembly processes
• Monitor the serviceability of measuring instruments or jigs and fixtures and reporting to Supervisor or Manager any non-compliance condition
• Maintain accurate records of inspection result at each electrical process

Job Requirements:

• Bachelor Degree or Diploma in Mechanical/Electrical Engineering
• Experience working in machine assembly environment
• A good track record of supporting the department achieving KPI
• Strong understanding of 5S and HSE knowledge
• Maintain good Quality standards, 5S and safety discipline
• Well verse in Microsoft office (Excel, Words, Powerpoint and Outlook)
• Knowledge of drawing software(Solidworks, Unigraphic, etc)

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Job Description:

- Setting up and operate CNC machining center and CNC Lathe

- Carry out daily housekeeping in the work area after each work shift

- Responsible to work safely and comply with all the safety work procedures and practices

Job Requirements:

- Nitec in Mechanical Engineering or Precision Machining

- Able to understand and interpret of mechanical blue print

- Able to use of measuring instrument