Task and Responsibilities

• Read and understand technical specifications, prepare job-list, work schedule, plan material take off and manpower planning of yard men and contractor for each given jobs. Report department head and update any special materials for specific project (if require more lead time or needs to purchase from overseas)
• Advance planning man and materials, including all facilities.
• Generate, Control and monitor department budgets.
• Order the material required as per material take off and co-ordinate with purchase department for timely delivery of the materials
• Cooperate with project manager on appropriate procedures and schedule to complete the job.
• Ensure safety, discipline and welfare for all subordinates.
• Carry out trade work as per specifications and to the satisfaction of the owner/class & timely completion. Ensure good quality work as per work instructions. Ensure all trade work mark-up drawings to be made and approved by owner’s representative
• Maintain good housekeeping and Safety at all times on board vessel & workshop. Ensure all workers follow safe work procedures at all times
• Responsible for minimum wastage of materials and balance material to be accounted and returned to store at the end of the project.
• Prepare, setup and review department documents (RA, SOP, Internal & External auditing, OR) with supervisor and manager
• Lead group of supervisors, fitters and sub-contractors.
• Ensuring optimum work processes and equipment utilization.
• Understand all jobs given supervise and give detail instructions to subordinates and contractors report to department engineer or department head.
• Ensure all work completion reports will be done by Ship in-charge, verify & submit to owner Rep to get sign before handing over to commercial department on time (before vessel delivery)
• Monitoring vessel daily job deployment report to achieve target on time.
• Perform other related jobs as assigned by DH.
• Ensure Permit to work system is followed strictly.
• Identify parts and components needed for repairs or replacement and to liaise with regional vendors for replacement of critical spares for vessels.

Job Requirements

3 years and above of relevant experience in ship building & Ship repair industry.

• Possesses in depth knowledge on Marine Machinery Works.
• Able to speak and write in proper English.
• Self-initiative and motivated individual.
• Possesses quality leadership skills to lead and supervise people under their charge.
• Able to give constructing advice based on their qualified experiences.

Roles & Responsibility :

• Schedule and plan production activities based on work orders
• Responsible for supervising factory workers and overseeing fabrication processes to ensure adherence to drawings and designs, maintaining quality consistency and operational efficiency.
• Ensure production schedule meet the delivery date, goods arrival and unloading are carried out smoothly, timely and completely.
• Organise and upkeep factory storage and movement of inventory are smooth and efficient.

Requirements :

• Min 5 yrs working experience in related industry
• Experience in stone counter top working sector
• Have experience in working machineries

• Provide administrative support to the Senior Production Executive and overall department to ensure smooth running of the operation
• Provide training and guidance for Production Assistants
• Data entry of daily production input and output including volume produced, new material consumed, material and products on-hold/defect
• Compile information such as production rates and progress, material inventory, material used and customers' information so that status report can be completed
• Assist Manufacturing Engineer and Production Supervisor in updating production charts, checklists and data
• Assist in preparing production reports and perform simple analysis on reports
• Maintain and update departmental overtime records
• Ensure proper documentation procedures are adhered to and conform to ISO standards and requirements
• Help to coordinate stock take process

• Reports directly to the Master Scheduler
• Coordinate production workflows in the shopfloor
• Plan and prioritise operations to ensure maximum performance and minimal delay
• Plan a weekly machine loading plan and 3 months forecasted loading plan
• Determine manpower, equipment and raw materials needed to cover production demand
• Recommend to Master Scheduler on deployment of workers and other staff to meet production and delivery requirements
• Recommend shift schedule to Master Scheduler accordingly to production needs
• Liaise with Purchasing and Suppliers for material deliveries and outsourcing schedules
• Monitor jobs to ensure they will finish on time
• Address issues whenever they arise with the aim of minimal disruption
• Obtain output information (Number of finished products etc.)
• Prepare and submit status and performance
• Collaborate with Quality, Sales, Store, Engineering and other departments to ensure good production flow and coordination
• Manage and train the assistant planners and subordinates
• Any other duties assigned by the Manager

Requirements

• Diploma or further education/certificates is preferred
• Excellent knowledge of production planning and quality control principle
• Working knowledge of MS Office and ERP Systems
• Strong organisational and problem-solving skills
• Excellent communication abilities
• Able to converse in English and Mandarin
• Willing to learn and be a team player

Production Executive oversees day-to-day production operations as a 2nd in command to the production manager. He/she supports the department in fulfilling key performance indicators, quality assurances, investigating issues, and recommending solutions.

Job Descriptions:

• Develop production plans and schedules to meet customer demands while optimising resources and minimising costs.
• Identify opportunities for process optimisation, efficiency improvement, and cost reduction within the production process, and implement appropriate strategies and initiatives.
• Ensure that production processes adhere to quality standards and regulatory requirements, implementing quality control measures to maintain product quality and safety.
• Oversee inventory levels of raw materials, ingredients, and finished products, and develop inventory management strategies to optimise inventory turnover and minimise waste.
• Allocate resources effectively, including manpower, equipment, and materials, to ensure smooth production operations and meet production targets.
• Lead and motivate the production team, providing guidance, coaching, and support to ensure high performance and morale.
• Ensure compliance with safety regulations and standards, implement safety protocols and procedures, and promote a culture of safety within the production workplace.
• Monitor production costs and expenses, identify cost-saving opportunities, and implement measures to control costs without compromising product quality or safety.
• Collaborate with other departments / internal stakeholders, to ensure seamless coordination and communication across the production process.
• Drive continuous improvement initiatives, encourage innovation, and implement best practices to enhance production efficiency, quality, and effectiveness.
• Generate reports and analyse production data to identify trends, inefficiencies, or opportunities for improvement. Present findings to superiors and contribute to decision-making processes. Maintain accurate records of production data, including batch records, inventory reports, production schedules, and quality control documents.
• Organized & upkeep all production & administration documents for traceability & record.
• Perform any other ad-hoc projects or tasks to be assigned by the HOD /management from time to time.

Job Requirements:

• Minimum Degree in Bachelor's and Associate Degree in Education, Management, Technical, Culinary, Food Service Management, Food Technology, Dietetics, Hospitality, Business, Culinary Arts, Healthcare of relevant or equivalent
• At least 2 years of experience in relevant field or in F&B background
• Proven experience in food production management, with a strong understanding of food production processes, equipment, and technologies.
• Adequate leadership, communication, and interpersonal skills, strong organisational skills; and attention to detail
• Strong problem-solving abilities and analytical thinking.
• Knowledge & experience of handling food safety regulations (e.g., HACCP, GMP, ISO22000/FSSC22000) and quality standards is preferred
• Ability to work under pressure and meet tight deadlines.
• Experience in lean manufacturing principles and process improvement methodologies is advantageous.
• Proficiency in computer applications or administrative software/tools (MS Office, Enterprise Resource Planning System, NAV System, SAP, etc.) is preferred

Summary

Responsible for operating equipment and conduct basic maintenance. Provide technical support to production.

Responsibilities

• Operate a process/equipment and conduct basic maintenance.
• Set-up and adjust equipment to ensure smooth flow of production.
• Perform troubleshooting on production process and equipment.
• Perform line clearance before starting a work and ensure:

1. a.the equipment/machine is qualified (e.g. within the validated maintenance/calibration date)
2. b.the tools are verified as per work instruction
3. c.all the process parameters are verified as per work instruction
4. d.the materials are verified as per BOM and ensure that there is no other materials in the work stat
5. Maintain good manufacturing practices all the time and ensure zero non-conformance product.

• Ensure 5’S and cleanliness on work area.
• Maintain proper records for production data and comply with GDP.
• Maintain compliance of EMS, QMS, cGMP and regulatory requirements in manufacturing activities.
• Other duties as assigned.

Requirement

• Secondary/Diploma in Engineering related disciplines or equivalent.
• At least 1 year of related work experience would be added an advantage.
• Good mechanical or industrial aptitude and knowledge.
• Basic MS office skills and computer skills.
• Possess positive mind set and willingness to learn.
• Ability to speak, read and write English.
• Able to work independently and also work well with a team.

Responsibilities:

• Oversee inventory to meet production demands and avoid shortages.
• Collaborate with internal teams and suppliers to ensure timely material delivery.
• Adjust production schedules as necessary to meet deadlines.
• Ensure product quality by working closely with the testing team.
• Schedule production staff according to workload requirements.
• Utilize ERP/MRP systems for streamlined planning and scheduling.
• Supervise production staff for effective task completion as required.

Requirements :

• Diploma in Manufacturing Engineering or equivalent.
• At least 1 year of working experience in electronics manufacturing.
• Experienced in material planning, inventory management, and proficient in ERP and MRP systems.
• Possess leadership and supervisory skills.

_________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Generate and prepare manufacturing work order documents
• Update daily production output, non-conforming quantities, etc which are required for department KPI compilation
• Update delivery schedule and submit to Admin for Delivery Order (DO) preparations
• Data entry into ERP for inventory and costing purposes
• General administrative support for the department where required

Job Requirements

• Min. secondary school qualifications
• Able to work independently
• Basic computer skills (eg. able to do data entry into Microsoft Excel)
• Experience in intepreting simple technical drawings is an advantage

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Key Responsibilities

• Lead AM materials development, manage projects involving multiple stakeholders. Use materials-process-performance research methods to investigate, solve, and deliver project objectives.
• Lead metal AM application and parts development projects including parts selection, design, prototyping and manufacturing
• Operation of metal AM machines and auxiliary equipment, including maintenance troubleshooting, and risk assessment
• Execute customer projects using AM materials and applications knowledge, to meet project deliverables and deadlines. Support in FEM simulation for DfAM.
• Provide technical support for addressing technical inquiries related to the development process, quality assurance, and analytical problems.
• Produce technical reports and presentations for AM project development

Job Requirements

• Masters/PhD in Engineering, Mechanical/Materials or equivalent
• 5-7 years of working experience with AM materials-process-performance characterization and analytical tools.
• Experience in LMD and/or L-PBF machine operations
• Proficient in 3D modelling and 2D drawing using Solidworks
• Experience in CAM and Siemens NX
• Experience in FEA/FEM
• Strong understanding of LMD process and materials, key process variables.
• Experience with parameters development, material characterization methods
• Experience with LMD machine operation
• Proficient in statistical tools like DOE
• Familiar with metal AM process chain
• Able to work independently and self-motivated

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

CALLING FUTURE MANUFACTURING LEADERS

The Manufacturing Leadership Development Program (MLDP) is our flagship global manufacturing graduate program. Our simple goal is to identify, hire, and develop our future Manufacturing Leaders. If you have the profile of being a Leader in our Company, we are eager to engage with you, accelerate your development, and bring greater value to our patients worldwide.

Over the 3-year rotation program we would significantly invest in your development giving you exposure across our business, preparing you for a role in leadership. You will receive coaching from senior leaders, exposure to real life manufacturing challenges and training from industry leading scientists and engineers. You will be contributing to significant projects and be making key decisions that directly impact how we make pharmaceuticals products and deliver them to our patients globally.

We hire a small number of members each year for this program, and we work hard to ensure that we truly select candidates with the greatest potential to lead. To help assess if you fit the profile here are some questions to ask yourself:

• Are you motivated to be part of the “flagship” future talent program in our Company?
• Are you geographically mobile with the possibility of international rotation?
• Are you willing to travel to different sites over the first three years of employment?
• Are you excited by opportunities?
• Are you a recent graduate with less than 1 year of working experience?

If the answer is "YES" to all these questions, then keep on reading!

The Manufacturing Leadership Development Program has two primary goals:

• Provide candidates who have a Bachelor’s or Master's degree level in Science and Engineering with a broad perspective of the core manufacturing functions of our company’s pharmaceutical, biological, animal health and vaccine products.
• Develop a bench of talent who can prepare for future leadership positions of increasing responsibility within the organization through focused rotational experiences within the key areas of our Manufacturing Division.

The program enables successful candidates to experience (3) rotations over a three-year period with each rotation lasting (1) year. Employees are assigned to rotations based on critical business needs and aligned to develop critical experiences. In addition to their assignments, employees receive mentoring from peers and senior leaders during their assignment. Rotation members should expect to work at different high impact sites during their tenure in the program and should have flexibility to move where assigned to meet business needs. It is expected that a candidate moves between sites during the program, as this allows the employee to gain the broadest perspective of the division and to maximize accelerated learning and exposure.

Within the rotation, some domestic and international business travel may be available. International rotation assignments are not guaranteed.

The program is designed to strengthen the candidates' skills in teamwork, collaboration, and leadership. The program also includes a formal learning curriculum, designed to enhance a wide variety of competencies including but not limited to:

• Business outcomes across the end to end supply chain
• Continuous improvement/Problem solving
• Lean Manufacturing
• Quality/Good Manufacturing Practices
• Managing and Optimizing internal and external partnerships
• Strategic Thinking
• Financial Acumen

The successful candidate is:

• Interested in participating in a broad range of work experiences across the manufacturing division.
• Able to work independently, in teams, and lead teams.
• Able to adapt to new roles, responsibilities, and situations.
• Motivated to cultivate their leadership skills along with their technical, business and commercial skills by applying their knowledge within manufacturing.
• Dedicated to both their own career development as well as bringing their best to our company.

Main Function:

• Form A license holder other license as required by regulatory.
• Liaise with regulatory body regards pharmaceuticl compliance affair.
• Require Singapore Registered Pharmacist Licence.

Job Responsibilities:

· Responsible for all dispensing operation for materials to be used in Production, including to provide timely report to Production Manager,

· Responsible for the management of controlled substances/controlled drugs and inventory, ensuring compliance with regulatory requirements and organizational policies.

· Under Production Manager supervision and direction to manage operational training and development of manpower in production, and ensure relevant SOP update to date.

· To assist the Manager to plan, record and monitor the Production manpower headcount in accordance to employment matrix including proposing replacement and additional manpower

· Together with other team member to assist production manager in operational workforce management and engagement, and well-being.

· Together with production executive to conduct safety relevant training, to promote GMP compliance, and to support GMP audit, Project, etc under manager supervision and direction.

· Together with team member to support GMP inspection by authority or customers

· A crucial role covering for the Regulatory Pharmacist during his/her absent.

· Other duties/projects assigned by the Production Manager.

REQUIREMENTS:

· Candidate must possess at least Bachelor's Degree of Science (Pharmacy).

· At least 3 Year(s) of working experience in the related field is required for this position.

Responsibilities:

• Oversee inventory to meet production demands and avoid shortages.
• Collaborate with internal teams and suppliers to ensure timely material delivery.
• Adjust production schedules as necessary to meet deadlines.
• Ensure product quality by working closely with the testing team.
• Schedule production staff according to workload requirements.
• Utilize ERP/MRP systems for streamlined planning and scheduling.
• Supervise production staff for effective task completion as required.

Requirements :

• Diploma in Manufacturing Engineering or equivalent.
• At least 1 year of working experience in electronics manufacturing.
• Experienced in material planning, inventory management, and proficient in ERP and MRP systems.
• Possess leadership and supervisory skills.

_________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

We are seeking an a Production Planner to join our UAV team. The ideal candidate will be responsible for planning, scheduling and coordinating production activities to ensure timely delivery of unmanned aerial vehicles (UAVs) while optimizing resources and maintaining quality standards. This role requires strong analytical, organizational, problem-solving skills and with a deep understanding of production planning and supply chain management.

Job Description:

a. Production Scheduling:

• Develop and implement detailed production schedules for UAV manufacturing, ensuring timely and efficient production.
• Adjust schedules based on changing demands, resource availability and unforeseen delays.

b. Inventory and Material Management:

• Monitor inventory levels and coordinate with procurement to ensure all materials and components are available.
• Optimize inventory levels to avoid shortages or excess stock.

c. Capacity Planning:

• Analyze production capacity and proposed allocation of resources (machinery, manpower, materials) to meet production targets.
• Collaborate with manufacturing team to ensure production aligns with available resources and equipment maintenance schedules.

d. Collaboration with Cross-functional Teams:

• Coordinate between engineering, procurement, quality assurance and manufacturing teams to ensure seamless workflow and communication.
• Work closely with program manager, quality control and procurement teams to align production with project timelines and customer demands.

e. Production Monitoring:

• Track production progress, identify bottlenecks and proactively adjust schedules to mitigate potential delays.
• Ensure that production goals are met while maintaining high standards of quality.

f. Data Reporting:

• Generate and present regular reports on production performance, inventory levels and resource utilization.

g. Quality Assurance:

• Work closely with the quality control team to ensure assmebled UAVs meet company standards

Job Requirements:

• Degree/ Diploma in either Supply Chain Management, Production/Operations Management or any related field.
• Possess 3 years of experience in production planning
• Proficiency in SAP production planning software and Microsoft Office Suite (Excel, Word, PowerPo (optional but preferred)

Rapsodo Inc. is a sports analytics company that uses computer vision and machine learning to help all athletes maximize their performance. Our proprietary technology applications range from helping PGA Tour golfers optimize their launch conditions to allowing MLB pitchers to increase the efficiency of their breaking balls. Current partners include all 30 MLB teams, MLB, USA Baseball, Golf Digest, PGA of America, and over 1000 NCAA athletic departments.

New Product Introduction (NPI) is the end-to-end process of bringing a new product to the market from design concept to the end customer. It broadly encompasses the following stages of the engineering team: Lab Prototypes (LP), Production Prototypes (PP) & Production Ramp (PR).

As an NPI Engineering Intern at Rapsodo, you will be exposed to the different stages of NPI for Rapsodo’s upcoming products to be released. You will also be exposed to the manufacturing environment of how our products are built and supported by our Research & Development (R&D) Team.

Roles & Responsibilities

• Gain invaluable exposure into Singapore’s Technology Sector

• Be exposed to the different stages of the NPI process for Rapsodo’s upcoming products

• Assist with building prototypes

• Provide feedback for the prototypes you build

• Be involved in investigative study with our R&D Team

• Be exposed to working with our Software Test Team, Purchasing Team as well as Manufacturing Team

• Pursuing Diploma in Electrical, Mechanical Engineering or any related Engineering discipline

• Responsible, hardworking and a team player

• Good attitude to learn and contribute to the team

• Pro-active, organized & meticulous and able to work independently in a fast-paced environment

• Have strong analytical, problem solving and inter-personal skills

• Excellent written and oral communication skills with the ability to present ideas and results to technical and non-technical audiences

Job Summary:

• Monday - Friday
• Joo Koon
• Immediate interview arrangement

Job Responsibilities:

• Perform office administrative works to support the team.
• Managing subcon claims.
• Review price of materials purchased.
• Analysis product price.
• Any other duties as assigned by the supervisor.

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Responsibilities

• Emphasizing and leading safety in the production plant to achieve 0 LTIF
• Understand and execute production plan and ensuring targets are met daily, reviewing the Routine Interval Control (RIC) checks
• Enhancing the competencies of the workforce through staff planning, OJT and appropriate rewards and recognition
• Ensuring good machine performance and uptime for optimal production
• Focusing on quality products and services through appropriate parameters setting, competent operators, high availability of machines and appropriate material condition.
• Being responsible for continuous improvement

Job Requirements

• Diploma/Degree in industrial engineering or equivalent
• Minimum of 8 years of experience in structural steel fabrication
• Supervisory or management experience
• Strong communication, leadership, and problem-solving skills

Job Description & Requirements

1. Formulate and provide directives for Production Department in meeting organization's goals and committed to Quality Management System.
2. Accountable with the assigned factory sections in terms of production, New Model Development, Customer Service and Support, Supplier and Materials Management, Logistics and Transportation.
3. Analyze section profit/loss of projects and providing cost control and cost effectiveness strategy.
4. Provide production & material planning in ensuring production efficiency and on time delivery.
5. Ensure effective control of machine up/down time and well scheduled and optimized planning in machine / work-center load.
6. Manpower balancing and deplaoyment strategy with manpower skill set.
7. Continuous improvement program to ensure productivity, cost and quality effectiveness, general housekeeping and safety.
8. Formulate, identify and conduct management / training workshop to initiate / facilitate staff in aligning organizations missions and objectives and actions plans.
9. Support other function activities within the company to achieve the overall business goals and objectives.
10. Implement process improvement.
11. Authorize the appropriate use of performance monitoring and statistical techniques.
12. Ensure and coordinate the implementation of risk assessment and risk contol of medical devices.

Requirements:

• Preferred to have Diploma / Degree in Mechanical / Precision Engineering or equivalent.
• Minimum 6 years in a Manufacturing environment (preferably in Precision Engrg / Sheet metal industry) and with at least 4 years of supervisory capacity.
• Exposure with involvement in newly factory, product / process set-up is much preferred.
• In-depth understanding of manufacturing cycle and good budgeting control.
• Strong leadership with good analytical and problem solving skill, as well as dynamic in planning and result oriented.

Purpose: Responsible for supervising staff, ensuring health and safety regulations at work are followed, making sure adequate training has been provided to the workers in the usage of equipment, and identifying deficiencies to be improved in production.

Key Area of Responsibilities:

• Supervising the man and assembly process, ensuring quality work is done safely and efficiently.
• Organize and motivate the mini-companies to perform daily production activities.
• Draw up training, and job rotation plans to develop manpower to be more flexible and competent and stimulate continuous productivity improvement.
• Liaising with other Engineers to develop plans that improve productivity, in terms of costs and manpower required.
• Support engineering/manufacturing teams, draw up safety protocols, report issues to the manager, and develop strategies to improve efficiency and profit.
• Take part in quality meetings with QA and process, conduct production CAB meetings, and ensure corrective actions are carried out.
• Conduct daily supervisor and production meetings to achieve delivery reliability.
• Record and report on the department’s activities and production results regularly in each productivity review meeting.
• Manage consumables and non-capitalized equipment spending.
• Maintain and ensure 5S housekeeping on the shop floor.

Qualification & Experiences:

• Diploma/bachelor’s in engineering (Mechanical, Mechatronics, Electrical, Precision or Industrial Engineering).
• At least 3 years of experience as an engineer in the manufacturing assembly environment.
• Good communication skills to perform mentoring and coaching to production staff.
• Good knowledge in problem-solving methodology.
• Ensure the safety standards and process safety management is duly followed.

In this role, you are required to support the daily operations of the production section you are assigned to. You will be required to maintain the production area cleanliness and comply with food hygiene management standards.

Job Description

• Prepare and process of food items (Halal).
• Prepare items according to in-house procedures.
• Follow food production and preparation specifications.
• Preparing food ingredients by measuring, mixing, stirring, chopping, slicing, dicing, peeling, or otherwise preparing them for use in meal preparation.
• Ensure proper and safe operation of machineries.
• Maintain & ensure the cleanliness of work area.
• Check and ensure that quality and quantity of items ordered are received and stored in proper condition.
• Keep track of inventory to ensure adequate food ingredients, packaging supplies and finished product.
• Perform other ad-hoc duties as requested.

Requirements:

• Physically fit
• Able to work as a team.
• No Experience may apply.

We are award-winning rope ladder manufacturer, looking for initiative and energetic guys to join us!

Job Scope:
• Main production support: Rope ladder assembly
• Supporting of daily warehouse operations

Work location: 33 Tuas Ave 2 Singapore 639463
Company provides transport pick up at Lakeside and Boon Lay MRT station

Working hours:
Monday to Friday 8:00am-5:15pm (Incl. 3 break time)
Saturday 9:30am-12:30pm (1 day per month only)

Salary: SGD 2,000-2,400 per month

We provide AWS, Annual leave, Birthday leave, Marriage leave, Compassionate leave, Childcare leave etc...

WhatsApp resume for interview booking: +65 8524 2452 (message only, no phone call)

Only Singaporean and PR can apply, thank you!!!

We are looking for a knowledgeable and enthusiastic cook with experience in both North/South Indian cuisine to work with us. We are for a candidate who can work with us to create new varieties of food products as well as improving our current line of food products through flavour enhancement, food longetivity and quality control.