• Regularly follow written and verbal directives to safely and efficiently operate plant equipment, manage site services, and handle vehicle loading/unloading. The specific responsibilities may differ depending on the site.
• Identify and propose safety and efficiency enhancements within the work area, participating in multidisciplinary teams to prioritize and implement these improvements.
• Effectively communicate with production team members and other onsite functions (e.g., maintenance, planning, logistics) through verbal, email, and written means, ensuring clarity and accuracy in communication.
• Take responsibility for personal health and safety, as well as the safety of others potentially affected by one's actions. Adhere to site-specific safety, health, and environmental (SHE) standards, including risk assessment, permit compliance, and incident reporting.
• Understand the importance of attention to detail and adherence to instructions, recognizing the potential consequences of oversight or incomplete adherence.
• Make routine operational decisions following established procedures, seeking guidance from line managers or team leaders for non-routine decisions.
• Efficiently plan and organize work and materials for the current shift and prepare for the upcoming shift in the assigned area, aligning with site logistics and production plans. Ensure safe and effective shift handovers.
• Provide training and mentorship to new team members in their respective roles.
• Perform maintenance tasks as required (level of maintenance activity varies by site), including preparation of equipment for maintenance activities based on instructions.
• Conduct agreed-upon analytical testing as needed (level of analytical activity varies by site).
• Identify and manage emergency situations according to established procedures, potentially participating in site emergency response activities outside regular hours in some sites.

• NITEC / Diploma in Chemical Engineering, minimum 4-5years experiences in chemical, petrochemical and oil & gas industry

Interested candidates can forward their CVs in MS Word format to [email protected]

Reg No. R1875181

Triton AI Pte Ltd

License no. 21C0661

• Gross Salary up to $6,500 with AWS + 2 months bonus
• Working location at Jurong Island
• Working Hours: 7.15am to 7.15pm (12 hours shift)

Job Description:

1. Lead a team of assembly technicians and assembly craftsmen.

2. Monitoring on productivity and ensure on-time delivery scheduled by respective stakeholders.

3. Oversee safe use of equipment and schedule regular maintainance.

4. Perform verification of production output according to specifications.

5. Prepare reports and updates for upper management.

6. Coordinates job assignments and cross-training between and within departments.

7. Supervises processes and ensure smooth operations

8. Handling customer complaint and quality issues. Provide failure and root causes analysis and implementing corrective actions to prevent recurrence.

9. Perform other duties and responsibilities as assigned.

Requirements:

1.Proven experience in semiconductor manufacturing, with at least 5 years in assembly operations

2. Previous experience in a supervisory or leadership role preferred.

3. Able to work and collaborate with different function groups.

4. Read and understand technical assembly drawing and customer's specification.

5. Ability to work in a fast-paced environment.

6. Min. Higher Nitec in Engineering.

Job Description Summary:

- To maintain all different production equipment to generate the best desired output, overall equipment effectiveness, mean time between failure and mean time to repair.

Responsibilities:

-Production machinery and equipment maintenance • Maintain and repair all different production equipment to generate the best desired output, Overall Equipment Effectiveness (OEE), Mean Time Between Failure (MTBF) and Mean Time To Repair (MTTR)

- Troubleshoot in accordance with the checklists, monitoring procedures, mini specification, and any engineering instructions in compliance with customers’ requirement and internal quality standards.

- Perform real-time equipment troubleshooting, repair, calibration and conduct periodic and non-periodic equipment preventive maintenance

- Manage spare part inventory and maintain the production facility clean and safe. • Ensure that materials are used and handled appropriately to avoid scraps

- Perform daily 5S housekeeping and Total Productive Maintenance (TPM)

Requirements:

- Diploma in Mechanical/Electronics/Mechatronics Engineering or equivalent

- Entry level candidate are welcomed to apply as training provided.

- Able to work on 12 hours shift.

- Manufacturing experience would advantage.

RESPONSIBILITIES

Manufacturing/ Production Line setup, pre-qualification and maintenance.
Provide technical support to customer related to assembly/ manufacturing.
Develop process and generate work instruction.
Review drawing, customer specifications and Bill of Materials cleanup.
Assembly, test, and commissioning of highly automated industrial equipments.
Train, certify and monitor assembly technicians.
Develop necessary technical competencies and equipment capabilities to meet operational performance targets
Work and collaborate with Production to achieve the desired quality and output
Conduct MRB to review non-conformance parts disposition.
Design/Fabricate tools, jigs and fixtures.
In-process yield/reject/scrap rate monitoring.
Lead and drive the team to participate in all continuous improvement projects related to cost, quality, utilisation & productivity using Six-sigma or similar applicable technology such as Cpk, FMEA, Lean etc
Any other duties assigned by his/her superior / Manager.

REQUIREMENTS

Minimum three years of relevant experience in Equipment Manufacturing Industry preferably wire bonding Equipment (Ball Bonding/Wedge Bonding/Die Bonding)
Diploma in Mechanical/Mechatronics/Electrical Engineering or equivalent
Proficiency in equipment troubleshooting techniques
Strong problem solving and analytical skills with good knowledge of SPC
Good leadership / presentation / communication / team building skills
Ability to work proactively and to identify issues and propose solutions
Able to design and implement effective systems, processes and informatio/ reporting mechanisms
Experience in Lean Manufacturing and ISO system

Please indicate your current and expected remuneration.

Key Responsibilities

1. Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
2. Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
3. Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
4. Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.
5. Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Functional Knowledge

• Applies basic analytical skills or scientific methods or operational processes to perform straightforward activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Uses standard operating procedures or scientific methods to guide own work and solve standard problems

Impact

• Impacts own work

Interpersonal Skills

• Uses communication skills to exchange information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Applies basic analytical skills or scientific methods or operational processes to perform straightforward activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Uses standard operating procedures or scientific methods to guide own work and solve standard problems

Impact

• Impacts own work

Interpersonal Skills

• Uses communication skills to exchange information

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities

• To further enhance Manufacturing Engineer capability in Engineering
• Oversee the Manufacturing Engineering activity in Engine Overhaul/Component Repair production areas. Act as Technical Authority, assuring the initial and continuing capability of the Production method to produce conforming product and ensuring the resolution of technical issues/problems/arisings to meet business and customer requirements for safety, cost, delivery rate and leadtime (SQCD). Support integration on all Manufacturing Engineering activities across the product lifecycle and through the supply chain.
• HSE – Practice full compliance to Health, Safety & Environmental Standards and meet the expectations of the Zero Harm programme.
• Product Safety – Understand product safety risks and work on mitigation to meet the required safety levels supporting requirements of the Company’s Safety Management System.
• Quality – Practice a culture of zero defects ensuring that manufacturing processes and methods within the business are developed and deployed to support Right First methodology. Support process and product related Quality investigation, and manage NADCAP accreditation.
• Delivery – Ensure that manufacturing processes and methods of manufacture within the business and suppliers are developed and deployed to support/deliver Right First Time manufacture using SPS, DMAIC and System Engineering tools. Manage FAIR/MSA activities and Source & method change in the cell/area of accountability.
• Delivery – Review issues identified e.g. Troubleshoot Strip / Build, Balancing, Runout, In-situ repair, Component Repair processes and key equipment/toolings (ITT, VTL, BTG, Wash, FTB, CMM, etc), determine resolutions and reestablish the Standards.
• Cost – Support cell/area of accountability to meet cost targets e.g. productivity, CONQ etc.
• Standards – Deploy and sustain the SAESL Operating System Standards by working with the Cell/Area CFT, and where applicable with the suppliers. Identify opportunity to improve the Standards.
• Technical Authority – Specify Manufacturing Engineering and process requirements and make technical decisions in relation to the cell/area of accountability.
• Lean/Improvement – Identify requirements for improvements and innovations in manufacturing processes and methods of manufacture within their cell/area of accountability. Prioritise and promote launch of new projects based on business case. Drive manufacturing processes towards identified best practice.
• Deploy capability (including NPI) – Responsible for production readiness of new product manufacturing capabilities or methods of manufacture. Develop numerate, real time methods for capturing process capability, and ensure it is available and acted on within the facility/supply chain. Maintenance of Production Technical Packages (technical instructions, programmes, tooling, etc) for all parts/assembles which clearly define the manufacturing process ensuring manufacturing processes and/or methods of manufacture meets the requirements for quality, cost, delivery rate and lead time

Requirements

• Candidates with Aeronautical / Manufacturing / Mechanical / Industrial discipline and relevant experience.
• Willing to work in Changi

Job Description & Requirements

1. Formulate and provide directives for Production Department in meeting organization's goals and committed to Quality Management System.
2. Accountable with the assigned factory sections in terms of production, New Model Development, Customer Service and Support, Supplier and Materials Management, Logistics and Transportation.
3. Analyze section profit/loss of projects and providing cost control and cost effectiveness strategy.
4. Provide production & material planning in ensuring production efficiency and on time delivery.
5. Ensure effective control of machine up/down time and well scheduled and optimized planning in machine / work-center load.
6. Manpower balancing and deplaoyment strategy with manpower skill set.
7. Continuous improvement program to ensure productivity, cost and quality effectiveness, general housekeeping and safety.
8. Formulate, identify and conduct management / training workshop to initiate / facilitate staff in aligning organizations missions and objectives and actions plans.
9. Support other function activities within the company to achieve the overall business goals and objectives.
10. Implement process improvement.
11. Authorize the appropriate use of performance monitoring and statistical techniques.
12. Ensure and coordinate the implementation of risk assessment and risk contol of medical devices.

Requirements:

• Preferred to have Diploma / Degree in Mechanical / Precision Engineering or equivalent.
• Minimum 6 years in a Manufacturing environment (preferably in Precision Engrg / Sheet metal industry) and with at least 4 years of supervisory capacity.
• Exposure with involvement in newly factory, product / process set-up is much preferred.
• In-depth understanding of manufacturing cycle and good budgeting control.
• Strong leadership with good analytical and problem solving skill, as well as dynamic in planning and result oriented.

Key Responsibilities

• Develops and applies quality standards in accordance with company and customer requirements. Develops and conducts related tests.
• Develops and uses procedures. Prepares documentation for inspection/ testing procedures. Recommends corrective action for procedural, product, or process deficiencies.
• Analyze operational data; Develop and implement recommendations. Participates in and may lead audits.
• Evaluates work methods, procedures and policies. Tracks progress of qualification status, reviews reliability test results, determines disposition of non-compliant products, reviews and releases qualification packs.
• Utilizes drawings, specifications, industry standards, and sketches, adapting inspection measuring devices and procedures when necessary. Read and interpret technical drawings and specification requirements.

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines.

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market.

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements.

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information.

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies.

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus.

Responsibilities

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components
• Performs electro-mechanical assembly operations, troubleshooting and repair
• Identifies and corrects errors
• Observes all safety standards and maintain a secure, safe, clean and healthy work environment
• Attends required health and safety training and follows safety and security policies, procedures and practices
• Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept
• Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly
• Actively strives to prevent accidents and injuries
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components
• Enters data on computer terminal, such as progress, work expense and labor details
• May perform computer programming, repair or software
• Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects

Requirements

• Able to develop analytical skills and application of scientific methods to perform a variety of activities
• Has good understanding of how the team integrates with others
• Able to recognize and solve typical problems that can occur in own work area without supervisory approval and evaluate and select solutions from established operating procedures and/or scientific methods
• Good communication skills to exchange of information

*Please submit with detailed CV stating current, expected salary, and notice period

*Only shortlisted candidates would be notified

Job Responsibilities

• To assist Engineer in collecting & compiling data for problem analysis
• Carry out basic troubleshooting & maintenance on machine
• To attend to production ‘First Defect Stop’ system on day to day issues
• Able to provide basic training to team leader / operator on machine or ‘First Defect Stop’ System
• At time to liaise with external supplier on simple improvement in machine
• To attend to any adhoc job if required

Job Requirements

• NITEC in Mechanical / Mechatronic / Electrical / Electronic or equivalent
• Prior experience working in a manufacturing environment
• Able to tabulate data and charts using Microsoft Excel
• Able to work independently with minimum supervision
• Able to perform 12 hours rotating shift work

Job Description

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Applies basic analytical skills or scientific methods or operational processes to perform straightforward activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Uses standard operating procedures or scientific methods to guide own work and solve standard problems

Impact

• Impacts own work

Interpersonal Skills

• Uses communication skills to exchange information

The Recruiter is responsible for Service Excellence throughout the recruitment cycle. They act as a brand ambassador for the client, focused on delivering exceptional talent while providing proactive and timely communication on the status of the search. They serve as subject matter expert in talent acquisition and provide consultative direction and industry expertise to hiring leader.    

Responsibilities:   

Finding Candidates: 

• Lead a detailed job scope meeting with the hiring leader to determine position specifications, providing relevant market data and recommendations on possible approaches to the search or candidate requirements.
• Review of candidates who have applied via the Applicant Tracking System (ATS).
• Evaluate candidate qualifications against position requirements and determine who to move forward in the recruitment process.
• Develop and manage recruitment marketing plans or sourcing plans to determine the most appropriate candidate sources that align to the search requirements.
• Source candidates via resume databases, search engine and networking sites using Boolean search language.
• Solicit and pursue referrals from business networks and/or internal referrals.
• Utilize Cielo’s proprietary software for mobile and email campaigning to talent communities.

Engaging Candidates:

• Use an appropriate mix of media to connect with talent communities (phone, email, social media, etc.).
• Articulate value proposition to candidates who are interested in the job opportunity.
• Prepare candidates for interviews, coaching them on logistical information, interview schedule, appropriate attire and overall expectations.
• Ensure candidates are provided with timely updates concerning the status of their applications and interviews.

Assessing Candidates:

• Draft and utilize phone interview templates appropriate to the job description.
• Use independent judgement to compare candidate phone interview notes and skills assessments with position requirements to determine if the candidate is a match for the role or a potential match for other open positions.
• Issue skills testing as needed and evaluate results (if process dictates).
• Review background and reference information (if process dictates).

Influencing the Hire:

• Keep candidates engaged throughout process, ensuring consistent communication on the status of the search.
• Partner with hiring leader to determine offer details, using market data and compensation guidelines to support recommendations.
• Articulate a job offer to candidate and drive for candidate acceptance, anticipating and negotiating counter-offers as appropriate.

Service Excellence:

• Strict adherence to all regulations (OFCCP and all other compliance standards set forth).
• Work to deliver a strong candidate slate, continuously building talent pipelines to ensure there are multiple qualified candidates in play at all times.
• Provide accurate and regular reporting of recruiting activities to the hiring leader and Cielo leadership to depict both metrics and efforts.
• Identify perceived difficulties with searches and research and recommend solutions to both internal and external stakeholders.
• Proactively and regularly communicate the status of each search to the hiring leader, providing a consultative approach with recommendations on how to move forward. 

Responsibilities:

• Assist in the end-to-end payroll process for employees.
• Ensure accurate and timely processing of employee timesheets, allowances, and deductions.
• Calculate and process monthly payroll.
• Prepare payroll reports for management review.
• Handle payroll queries from employees and resolve any discrepancies.
• Maintain accurate payroll records and documentation.
• Coordinate with relevant departments to obtain necessary payroll information.
• Stay updated on payroll regulations and compliance requirements.
• Assist in other HR administrative tasks as required.

• Diploma or degree in Human Resources, Accounting, or related field.
• Minimum 2 years of experience in payroll processing, preferably in a manufacturing MNC.
• Strong knowledge of payroll regulations and processes.
• Proficient in using payroll software and MS Office applications.
• Excellent attention to detail and accuracy.
• Good communication and interpersonal skills.
• Ability to handle confidential and sensitive information with discretion.
• Strong organizational and time management skills.
• Ability to work independently and as part of a team.

Interested candidates who wish to apply for the advertised position, please click on the 'APPLY' button below to send in your resume [email protected].

EA License No.: 13C6305

Registration No.: R24120209

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities:

• Provide legal counseling and guidance on compliance matters within a multinational company (MNC).
• Develop and implement compliance programs and policies in accordance with applicable laws and regulations.
• Monitor and assess compliance risks and ensure measures are in place to mitigate those risks.
• Conduct compliance training and awareness programs for employees.
• Review, draft, and negotiate contracts and agreements with compliance considerations.
• Stay updated on changes in laws and regulations related to compliance.
• Collaborate with internal stakeholders to ensure compliance in business operations.
• Handle compliance investigations and assist in resolving compliance issues.
• Ensure adherence to internal policies and procedures.
• Prepare and submit compliance reports to senior management.

• Law degree from a recognized university.
• Minimum 5 years of experience as a legal counsel with a focus on compliance.
• Solid knowledge of relevant laws, regulations, and industry practices.
• Experience in developing and implementing compliance programs.
• Strong analytical and problem-solving skills.
• Excellent communication and interpersonal skills.
• Ability to work independently and collaborate with cross-functional teams.
• Attention to detail and strong organizational skills.
• Proficiency in legal research and analysis.

Interested candidates who wish to apply for the advertised position, please send in your resume to [email protected].

EA License No: 13C6305

Reg. No.: R24120209

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Description

Key Responsibilities

1. Helps to coordinates project activities. Will update matrix for process improvements.
2. Assists in the coordination of project schedule and task details Helps prepare reports and tracking charts,
3. Will track the progress of resources within the business unit to meet project on-time and budget performance objectives.
4. Prepares request for quotes (RFQ). Coordinates completion of the in-use and Final Sign-off (FSO) milestones with all parties.
5. Revises non-technical aspects of the Statement of Work (SOW).
6. May communicate with internal customers to determine progress against project objectives. Under supervision reports progress against stated objectives.

Functional Knowledge

• Demonstrates conceptual knowledge of theories, practices and procedures within a discipline

Business Expertise

• Applies general knowledge of business developed through education or past experience

Leadership

• No supervisory responsibilities; accountable for developing technical contribution

Problem Solving

• Uses existing procedures to solve standard problems; analyzes information and standard practices to make judgments

Impact

• Has limited impact on own work team; works within standardized procedures and practices to achieve objectives and meet deadlines

Interpersonal Skills

• Exchanges straightforward information, asks questions and checks for understanding

Responsibilities:

• Develop and execute strategic sales and marketing plans to drive revenue growth in alignment with company objectives.
• Collaborate with cross-functional teams to ensure alignment of sales and marketing efforts with product development and manufacturing processes.
• Lead and oversee the implementation of marketing campaigns, product launches, and promotional activities.
• Analyze market trends, competition, and customer feedback to identify opportunities and formulate effective strategies.
• Manage key customer relationships and engagements, understanding their needs and ensuring customer satisfaction.
• Define program milestones, timelines, and deliverables, and monitor progress against established goals.
• Prepare and present reports, performance metrics, and recommendations to senior management.
• Ad hoc duties as assigned.

Requirements:

• Bachelor’s degree in Marketing, Business Administration, Engineering, or related field.
• At least 3 years of experience in Semiconductor Manufacturing with a focus on sales and marketing. Familiarity with semiconductor fabrication processes and technologies.
• Proven track record in developing and implementing successful sales and marketing strategies.
• Proficiency in data analysis, budget management, and project coordination.
• Results-oriented mindset with the ability to think creatively and strategically
• Strong understanding of semiconductor products, market dynamics, and customer requirements.
• Exceptional leadership, communication, and negotiation skills.
• Able to communicate effectively with suppliers and internal teams in both bilingual.
• Excellent communication, negotiation, and presentation skills, capable of establishing effective cooperation with individuals from diverse cultural backgrounds. abilities to effectively interact with customers and partners.
• Proficient in project management tools.
• Ability to thrive in a fast-paced, dynamic environment and manage multiple projects simultaneously.
• Ability to handle market competition and pressure, maintaining a positive attitude in high-intensity work environments.
• Resourceful and meticulous.

Responsibilities:

1. Developing Quality Standards

• Establishing and maintaining quality standards, policies, and procedures to ensure compliance with industry regulations and customer requirements.

2. Quality Management Systems (QMS)

• Develop, implement, and maintain comprehensive QMS in compliance with relevant standards & regulations, such as ISO9001 and industry-specific requirements.
• Implementing & managing QMS to continuously improve processes, reduce defects, and enhance overall product quality.
• Set quality strategies to drive company quality culture and quality improvements in process, product, and system.

3. Supplier Quality Management

• Collaborating with suppliers to ensure materials and components meet quality standards and conducting audits as needed.
• Maintains strong supplier quality relationships and drive supplier performance improvements.

4. Quality Assurance

• Creating and executing quality assurance programs, including testing protocols, inspection procedures, and product evaluations.
• Provide headship and consulting advice in quality matters.

5. Quality Control

• Establish and oversee quality control procedures & inspection processes to ensure product and service quality meets or exceeds customers expectations.

6. Data Analysis and Reporting

• Analyzing quality data to identify trends, issues, and areas for improvement. Generating reports and presenting findings to senior management.
  

7. Team Leadership

• Leading and mentoring a team of quality professionals, fostering a culture of quality excellence, and providing guidance on best practices.
• Lead a team of metrology specialists, inspectors, and engineers to manage day-to-day product inspection and buyoff.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

8. Regulatory Compliance

• Ensuring compliance with industry regulations and standards (e.g., ISO, SEMI, customer-specific requirements).
• Plan and lead manufacturing process audit.
  

9. Continuous Improvement

• Driving continuous improvement initiatives, implementing corrective and preventive actions, and fostering a culture of continuous learning and improvement.
• Promote a culture of continuous improvement and lean methodologies, identifying opportunities to streamline processes and enhance quality & efficiency.

10. Cross-functional Collaboration

• Collaborating with crossfunctional teams, including engineering, production, and R&D, to resolve quality-related issues and optimize processes.
  

11. Risk Management

• Identifying and mitigating quality-related risks throughout the manufacturing process.
• Lead Corrective and Preventive Action Board to drive robust manufacturing system and process quality to meet internal and customer requirements and expectations.
  

12. Customer Focus

• Interacting with customers to understand their quality requirements and address any concerns or issues related to product quality.
• Support Customer Quality Engineering to investigate customer product complaints.

13. Budgeting and Resource Allocation

• Managing budgets and resources effectively to achieve quality objectives.
• Responsible for quality KPIs and reporting to senior management.
  
  

Requirements:

• Bachelor in Engineering (Quality, Mechanical, Electrical, Electronics, Chemical, Engineering, Material Science) or a related field.
• A minimum 10 years of experience in quality management & assurance. Preferably from manufacturing semiconductor/manufacturing or electronics or high- tech instrument industry setting.
• Professional & strong knowledge of QMS & ISO Standards in a semiconductors/manufacturing environment.
• Familiarity with applicable regulatory and certifications requirements.
• Quality Auditor Certification is a plus.
• Good knowledge and practice Lean, FMEA, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations.
• Good understanding and experience in metrology management.
• Good understanding and experience in supplier quality management.
• Strong in analysis techniques and problem solving methodology.
• Must be able to communicate effectively with internal and external teams in both bilingual.
• Strong analytical problem solver with demonstrated ability to exercise sound judgment while working independently to resolve critical issues.
• Detail oriented and able to multi-task/work under pressure in a high energy and fast paced-environment with critical and tight schedules.
• Comfortable work in Changi North Crescents.

Responsibilities:

• Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies.
• Interfaces with other engineering functions to coordinate the release of product improvements and/or new products.
• Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products.
• Estimates manufacturing costs, determines time standards and makes recommendations for tooling and process requirements.
• To reduce manufacturing and/or product costs, and improve delivered product quality.
• May work with test engineering on the design and development of text fixtures. May assist in the coordination of test fixture sourcing activities.
• Gathers operational and test data and evaluates results; may takes corrective/continuous improvement actions.
• Evaluates work methods, procedures and policies.
• Participates in the development and maintenance of new and existing business processes.
• Determines root cause and corrective action analysis for issues that arise during assembly and/or test of systems; provides failure analysis report as required.
• Performs Process Failure Mode, Effects and Criticality Analysis when working with New Product Development.
• Provide technical support for the installation, commissioning, and maintenance of mechanical systems.
• Stay current with industry trends and advancements in semiconductor manufacturing technologies.
• Foster and maintain strong relationships with clients, suppliers, and contractors, ensuring smooth project execution.
• Perform other duties and responsibilities as assigned.

Requirements:

• Degree/Diploma in Mechanical Engineering or a related field.
• Good Knowledge in PFMEA, Process Change, Solidworks, Pro E, AutoCAD and a strong sense of Engineering Fundamentals are preferred.
• At Least 3-years of technical experience in the field, preferably within a Semiconductor Manufacturing environment; candidates with expertise in other industries and solid equipment knowledge are also encouraged to apply.
• Degree with min 3 years design experience and Diploma with min 4 years design experience.
• Good design experience in Machine Automation, Robotic Systems, Material Handling Systems and good to have experience in Fixtures & Tooling.
• Able to work Independently under minimum supervision and exhibit proactiveness in learning.
• Self-motivated and able to meet deadlines.
• Strong analytical and problem-solving skills.
• Familiarity with industry standards & regulations related to semiconductor manufacturing.
• Must be able to communicate effectively with internal and external teams in both bilingual.
• Candidates who are immediately available/ able to start work within short notice will be preferred.

Responsibilities:
1. Document Management:
- Create, revise, and manage quality documents, including standard operating procedures (SOPs), work instructions, and quality manuals.
- Maintain an organized and easily accessible document repository.

2. Quality System Compliance:
- Ensure that all quality documents adhere to regulatory requirements and industry standards.
- Collaborate with Quality Engineers to update documentation based on process changes or improvements.

3. Version Control:
- Implement and manage a version control system to track revisions and changes to quality documents.
- Monitor and communicate updates to relevant stakeholders.

4. Audit Support:
- Assist in internal and external audits by providing requested documents and ensuring documentation compliance.
- Address any audit findings related to document control processes.

5. Training and Awareness:
- Conduct training sessions for team members on document control procedures and best practices.
- Promote awareness of the importance of accurate and up-to-date documentation.

Requirements:

1.Qualifications:
- Bachelor's degree in a relevant field (Quality Management, Engineering, Business Management or related discipline).
- Proven experience as a Document Controller, preferably in a semiconductor manufacturing environment.
- Familiarity with quality management systems and standards (ISO, SEMI).
- Strong attention to detail and organizational skills.

2.Skills:
- Proficient in document management software and Microsoft Office Suite.
- Excellent communication and collaboration skills.
- Ability to work in a dynamic and fast-paced manufacturing environment.

3.Preferred:
- Certification in document control or quality management.
- Knowledge of semiconductor manufacturing processes.

Responsibilities:

• Provide sustaining support for deployed fixtures to ensure minimal down time and customer impact.
• Coordinates/Performs test fixture PM and Calibration activities as scheduled and follows-up on OOT issues as required.
• Interfaces with other test engineers and customers to coordinate the deployment of new test fixtures. Begin evaluating, designing and project managing own test fixture projects and solicit assistance as needed.
• Documents and tracks deployment issues to closure and initiates appropriate engineering change request as required.
• Uses basic engineering principles to estimate and reduce test fixture development costs and improve delivered fixture quality;
• Develops and uses test procedures. Assists with the definition of test specifications with design, software, and manufacturing engineering. May assist in the coordination and/or execution of test fixture sourcing activities.
• Gathers operational and test data and evaluates results; may take corrective/continuous improvement actions.
• Evaluates work methods, procedures and policies. Participates in the development and maintenance of new and existing business processes; updates as necessary to ensure current practices are documented.
• Determines root cause and corrective action analysis for issues that arise during design and deployment of test fixtures and provides failure analysis report as required.
• Performs Process Failure Mode, Effects and Criticality Analysis when working with New Product/Fixture Development.
• Stay current with advancements in testing methodologies and technologies within the semiconductor industry.
• Perform other duties and responsibilities as assigned.

Requirements:

• Diploma/Bachelor's degree holder in Electrical, Electronics, Mechanical, or a related field.
• At least 3-year working experience in testing engineering role & Proven experience in test engineering, preferably in semiconductor manufacturing.
• Knowledge in C/C++ Programming, PLC Programming, Java, Functional Tests and Hardware Troubleshooting.
• Strong knowledge of test equipment, data acquisition systems, and testing methodologies.
• Analytical & problem solving skills with attention to details.
• Investigative mind, paying attention to small details and good observer.
• Strong analytical skills, able to identify discrepancies during the test process
• Excellent time-management skills and commitment to meet deadlines
• Good communication skills and a team player.
• Must be able to communicate effectively with internal and external teams in both bilingual.
• Candidates who are immediately available/ able to start work within short notice will be preferred.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Establish and write company policies and procedures to comply with Country Customs and other governmental agency requirements for import and export activities.
• To interface with the relevant Customs Department, Freight Forwarder and Vendors in order to meet the shipping schedule and target achievement.
• Provide oversight and review of production contract application and closure processes in conjunction with country Finance and Materials department.
• Ensure the import and export activities are monitored and reviewed for accuracy and in compliance with country laws and regulations, rules, policies and procedures.
• Provide training on country customs requirements and procedures of country import and export activities to all appropriate company departments and personnel.
• Establish and maintain the level of relationship with country governmental agencies responsible for foreign trade and customs required to communicate the company commitment to compliance with all applicable governmental laws, regulations, rules, policies and procedures.
• Ensure that country governmental agencies responsible for foreign trade and customs are provided with the level of information about the company that they require to perform their functions and formalities.
• Monitors proposed changes in import and export rules, policies, procedures, regulations and laws and assess the impact for those proposed changes on the Company business.
• Ensure that company policies and procedures reflect any changes in country customs laws, regulations, rules, policies and procedures.
• Interface with Corporate logistics team to resolve issues associated with shipment out to the respective countries, ensuring best shipmen routing is well executed and to monitor the performance through indicators and metrics.
• Establish company standards of service providers (freight forwarder, customs brokers, trucking company etc) retained to assist with the supply chain.
• Manage and coordinate activities and services provided by Company agents to ensure that all documentation and services provided are accurate and maintain the standards required by Company.
• Delegates and organizes departmental workload according to project assignments and needs.
• May perform other duties and responsibilities as assigned.

Job Requirements:

• Bachelor's degree in Logistics, Supply Chain Management or a related field.
• Proven experience in logistics and customs management within the semiconductor industry.
• In-depth knowledge of Singapore customs regulations and international trade laws.
• Strong understanding of semiconductor supply chain processes and challenges.
• Good communication and negotiation skills for effective collaboration with internal team and external partners.
• Demonstrated ability to optimize logistics operations, improving efficiency and reducing costs.
• Must be able to communicate effectively with suppliers and internal teams in both bilingual.
• Proficient in using logistics management software and tools.
• Strong leadership skills with the ability to motivate and guide a team.
• Detail- oriented with a focus on accuracy in customs.
• Ability to adapt to changing regulatory environment and industry trends.