• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

• can work on publick holidays
• can work on shifts/change of shifts
• can work and stand for long hours
• at least 10 years experiences
• have relavant certificates/diploma
• hardworking and keen
• 
  
• Provide overall supervision of production activities.
• Plan, organize and lead a team of production workers to achieve production target and output, cycle time, and yield.
• Improvement in maintaining product quality and productivity. Provide a guideline to check on processes thereby assuring that work is done by the operators.
• Monitor the daily efficiency status of the line.
• Ensure good housekeeping and safety at the workplace.
• Oversee hiring and training of food production personnel
• Perform other duties as assigned.

Job Description & Requirements

1. Formulate and provide directives for Production Department in meeting organization's goals and committed to Quality Management System.
2. Accountable with the assigned factory sections in terms of production, New Model Development, Customer Service and Support, Supplier and Materials Management, Logistics and Transportation.
3. Analyze section profit/loss of projects and providing cost control and cost effectiveness strategy.
4. Provide production & material planning in ensuring production efficiency and on time delivery.
5. Ensure effective control of machine up/down time and well scheduled and optimized planning in machine / work-center load.
6. Manpower balancing and deplaoyment strategy with manpower skill set.
7. Continuous improvement program to ensure productivity, cost and quality effectiveness, general housekeeping and safety.
8. Formulate, identify and conduct management / training workshop to initiate / facilitate staff in aligning organizations missions and objectives and actions plans.
9. Support other function activities within the company to achieve the overall business goals and objectives.
10. Implement process improvement.
11. Authorize the appropriate use of performance monitoring and statistical techniques.
12. Ensure and coordinate the implementation of risk assessment and risk contol of medical devices.

Requirements:

• Preferred to have Diploma / Degree in Mechanical / Precision Engineering or equivalent.
• Minimum 6 years in a Manufacturing environment (preferably in Precision Engrg / Sheet metal industry) and with at least 4 years of supervisory capacity.
• Exposure with involvement in newly factory, product / process set-up is much preferred.
• In-depth understanding of manufacturing cycle and good budgeting control.
• Strong leadership with good analytical and problem solving skill, as well as dynamic in planning and result oriented.

• Design and develop ATE (Automated Test Equipment) programs for new products, covering both production and characterization testing.
• Engage in hands-on testing debugging, conduct RMA analysis, and enhance testing solutions for both hardware and software.
• Develop a test plan for the product, including scheduling, resource needs, and overseeing project tracking and execution.

Requirements:

• Degree in Electrical/Electronics Engineering
• At least 3 years of leadership experience in ATE test program development.
• Proficient in C++/ VB, ATE testers and Chroma.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at

www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Information:

1. Basic Salary: $2,600 - $3,500 depend on experience ;
2. Polytechnic graduate：$2,600 ; ITE guaduate: $2,400 - $2,500
3. Attendance: $40
4. Morning Shift: 7am - 3pm; Afternoon Shift: 3pm - 11pm ($8.50/day); Night Shift: 11pm - 7am ($14/day)
5. Company transport at various location in the west

Responsibilities:

• Operate and monitor machinery on the assembly line to ensure smooth operation
• Conduct routine maintenance tasks, identify and address any issues with machine operation
• Troubleshoot & repair production machines for mechanism and electrical issues to minimise downtime
• Inspections to identify potential malfunctions and perform preventive maintenance
• Work cross-functionally to identify areas for improvement in quality, productivity and cost reduction
• Develop/modifications to equipment and processes to enhance efficiency and performance
• Plan and execute improvement projects from conception to completion
• Evaluate existing processes and practices to identify opportunities for optimisation
• Propose solutions to improve operational efficiency and product quality
• Develop and update programming for automated production equipment to optimise performance
• Provide training to operators on the operation and maintenance of automated equipment as necessary
• Conduct washing to remove contaminants from ball bearings, ensure adherence to quality standards
• Perform test to assess quality and integrity of ball bearings, documenting results accurately
• Visual inspections to identify defects or abnormalities in the manufacturing process
• Compile audit work papers and documentation to ensure completeness and accuracy
• Assist in the development of audit protocols and procedures
• Perform other administrative duties as assigned
• Adhere to all safety protocols and regulations to ensure a safe working environment
• Maintain cleanliness and organisation in work areas to promote efficiency and safety
• Review/recommend changes on procedures for work environment and safety aspects (E.g. IATF 16949, ISO14001, Safety Management Systems, etc.)
• Attend meetings, reviews, discussion and coordinate with Superior to achieve target and yield rate.

Requirements:

• ITE Nitec/Higher Nitec/Polytechnic diploma in Mechanical/Electrical/Mechatronic engineering
• Entry level are welcome to apply
• Comfortable wearing jumpsuit and cleanroom environment
• Able to commit monthly rotation shift work

Interested applicants, send in your updated resume by clicking “Apply Now”

Michelle Koh

EA License No.: 23C1894

EA Personnel No.: R1656105

Information:

1. Salary Range: $2600 - $3000
2. Working hours: 8am - 5pm

Responsibilities:

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Troubleshooting production problems and assisting in planning new project work.

Requirements:

• Diploma in Mechanical / Mechatronics / Electrical Engineering
• Entry level are welcome to apply

Interested applicants, send in your updated resume by clicking “Apply Now”.

Michelle Koh

EA License No.: 23C1894

EA Personnel No.: R1656105

• Responsible for materials planning based on production demand.
• Monitor material shortages and ensure material availability to support production plan.
• Plan production schedule to meet delivery requirement.

Requirements:

• Diploma in Manufacturing/Production/Electronics Engineering
• At least 2 years of experience in electronics manufacturing industry
• Good knowledge in ERP/MRP system

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client is a global manufacturer. Due to business needs, they are now recruiting a FP&A Accountant to be part of their FP&A team for ongoing transformation projects. They are located in the North Area - easily accessible.

Responsibility:

• Coordinate the preparation, compilation, and analysis of the Annual Budget prior to its submission to the corporate office.
• Analyze financial variances and take a proactive approach by conducting meetings with operations departments to review and discuss monthly forecast performance.
• Synthesize complex data from various sources and transform it into comprehensive management reports.
• Scrutinize a wide range of records and engage with various departments to ensure data accuracy and reliability.
• Oversee SOX compliance and address internal and external audit queries.
• Enhance processes and actively participate in ad-hoc LEAN projects.

Requirements:

• Min Degree in Finance / Accountancy or any related field
• Minimum 5 years experience in FP&A and SOX
• Experience in manufacturing industry is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Our client is a Manufacturing MNC. Due to business needs, they are now recruiting a Sales Coordinator to be part of their Sales Team for ongoing transformation projects. They are located in the West - easily accessible.

Duties of Sales Coordinator:

• Accurately process sales orders in the system, ensuring correct product details, pricing, and customer information.
• Prepare and maintain sales documents, including quotations, invoices, contracts, and sales reports.
• Assist the sales team in preparing presentations, proposals, and any other necessary documents.

Requirements:

• Relevant experience
• Experience with SAP or ERP System

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Position: Sales Coordinator (Job ID: 19409)

• Fixed Transport Allowance
• AWS and Variable Bonus
• Attractive AL

Company: Manufacturing Company

Location: Central (Approximately 5-10 minutes walk from MRT)

Job Description:

・Manage and update excel documents for monthly/quarterly/yearly sales, input and calculate each item sales and update excel document
・Prepare shipping documents
・Communicate with supplier (overseas) and get information for sales and prepare invoice, packing list etc.
・Well communication with customer and ensure orders are processed promptly, accurately and delivery on time.
・Provide timely and effective administrative support to Sales Team
・Other related duties assigned by the company

Job Requirements:

・Open to non-experience candidate with good learning attitude (OJT will be provided)
・Having sales or shipping coordination experience will be an advantageous
・Proficient in Word, Excel
・Candidate should be meticulous, responsible and team player
・Flexible and supportive
・Good coordination skills
・Proficient in English language and Mandarin language to liaise with Mandarin speaking supplier
・Willing to learn

Interested applicants please send your resume to Jing Ling with email subject header “Job Application for Sales Coordinator (Job ID: 19409)”.

We regret that only shortlisted candidates will be notified. Other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Effective from 1 October 2020 under the new Employment Agencies (EAs) Licence Conditions,

EAs will be required to collect the personal data (e.g. NRIC number number for overseas candidates) of applicants referred to employers for permanent or contract job positions of at least six months with a fixed monthly salary of S$3,300 and above.

PDPA requirements on collection, use, and disclosure of personal data would not be applicable to EAs that are collecting such information as it is a regulatory requirement by Ministry of Manpower.

Please find Privacy Policy Agreement from the below link.
http://www.pasona.com.sg/privacy.html

Tan Jing Ling

EA Registration No: R24124404
Pasona Singapore Pte Ltd
1 FINLAYSON GREEN ＃09-02 SINGAPORE 049246
Email: [email protected]

URL: www.pasona.com.sg

EA License No:90C4069

[Order Number: 625106-R]

Responsibilities

• Develop and execute marketing and business plans to position products competitively, meeting customer and market demands.
• Conduct market research, analyze competitive activities, and identify customer requirements to enhance product offerings.
• Collaborate with engineering, manufacturing, and sales teams to develop or improve products and set pricing strategies.
• Prepare and negotiate pricing quotes, manage order documentation, and ensure timely follow-up on accounts receivables.
• Build strong customer relationships, understand service requirements, and represent both customer needs and company capabilities effectively.

Requirements

• At least 2 years of experience as a Sales Analyst or Market Analyst in the manufacturing industry.
• Willingness to travel and dedicate extended hours to manage challenging sales projects.

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:
https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Tan Sin Rou
EA Personnel Registration Number: R22106434
EA License no.: 07C5771

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for at least 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

Responsibilities

• Oversee the entire recruitment process, including job fairs, employee engagement, and other HR projects.
• Collaborate with department heads to understand their staffing needs and ensure those requirements are effectively met.
• Ensure all hiring practices comply with fair employment guidelines and promote equal opportunities.
• Manage onboarding and exit procedures to facilitate smooth transitions for employees.
• Build and maintain partnerships with educational institutions to support talent pipelines.
• Generate and update various HR reports to provide insights and support decision-making.
• Assist with day-to-day HR operations and provide support across various HR functions.
• Perform any other tasks as required by the HR department.

Requirements:

• Bachelor’s degree in Human Resources, Business Administration, or a related field.
• Minimum of 3 years of experience in recruitment/talent acquisition and HR Operations within a multinational organization, with exposure in managing high-volume hiring.
• Proficiency in Microsoft Office Suite, with strong expertise in Excel.
• Exceptional communication and interpersonal abilities, capable of working effectively with all levels of staff.
• Detail-oriented, highly organized, and a resourceful team player with a strong sense of urgency.
• Capable of managing a demanding workload with a hands-on approach.
• High ethical standards in handling sensitive and confidential information.
• Flexible, self-driven, and capable of working independently with minimal supervision.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QXVY58RR

Our client is a Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quotation Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Review and comprehend technical requirements outlined in customer tender documents.
• Coordinate with internal teams to collect essential data for proposal development.
• Provide technical expertise during tendering and quotation processes/activities and support the sales and marketing team with relevant engineering insights.
• Prepare cost breakdowns and delivery schedules to assist the sales and proposals team in responding to inquiries.
• Draft and compile technical documentation, such as datasheets, proposal designs, clarification notes, and responses to tender specifications.
• All other ad-hoc duties as assigned.

Requirements

• Min Degree in Relevant Qualification in Engineering or equivalent.
• Min 5 years relevant working experience.
• Proficient in Microsoft Office and CAD software.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Configure semiconductor devices, troubleshoot issues, and document engineering advancements.
• Create procedures for machinery assembly, assessment, and testing.
• Work with engineering and software teams to enhance system architecture.
• Partner with multidisciplinary engineers to address system challenges.

Requirements

Experience in setting up automated systems.

Proficient in electro mechatronic systems.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

The Opportunity

• Our client, a Global MNC in the Semiconductor industry
• Mon - Fri, Day OR Night shift - shift allowance available for night shift! (up to 550+ per month)
• Nearest MRT: Upper Changi
• Salary Up to $3000 (Depending on Exp)
• Fresh candidates welcomed!
• Company Transport provided

The Talent

• NITEC or Higher NITEC or Diploma in Electrical, Electronics, Mechanical, Microelectronics or any Engineering related studies
• Singaporean only
• Experience in Assembly, Build, Test, Preventive Maintenance is a must
• Candidates with or without experience are welcome to apply!

The Job

• Follow and provides feedback to complex technical reports and/or manufacturing procedures.
• Performs precision measurements and works within close tolerances
• Responsible for maintenance and troubleshooting of the Tools and Equipment
• Handling testing and assembly of equipment/Unit(s)
• In-charge of the set-up and calibration of the equipment/machine/tool
• Understanding electrical/mechanical diagrams and drawings
• Perform QA/QC checks duties

Next Step

• Interested candidates can email to [email protected] with details below:
  • Full Name
  • Residential Area
  • Updated Resume
  • Availability

The Manufacturing Cost Accounting & Finance Manager, (internal title: Plant Controller) will be responsible for acting as a business partner to the management team of a manufacturing facility enabling strong business performance and ensuring adequate controls. The position will provide day to day support to the management team in line with the performance objectives of the Manufacturing Director and in compliance with company controls and compliance. This position will report directly to the Manufacturing Controller and functionally to the Senior Plant Manager.

Job Responsibilities:

• Control of day-to-day Accounting and Finance Activities including: -
• Budget - Preparation of Budget, Forecast and comparisons.
• Audit - Statutory audit, Internal Audit and financial reports.
• Operations Activities.
• Review and analysis daily shipments, receipts and Direct Labor Hours.
• Involve in day to day manufacturing operations for cost cutting and process improvements.
• Preparing monthly targets for operation staff for shipments and Direct Labor hours and Inventory.
• Control in operational cost including operating supplies/ Repairs/ Overtime.
• Continually assess productivity and efficiency with a view to improve.
• Plan and schedule equipment acquisition and storage, considering such factors as availability, costs, and other economic projections to meet current, short and long term customer requirements.
• Develops periodical reports on jobs accomplished, personnel and equipment utilization, sales and inventory, generated revenue and incorporated costs.
• Monitors and coordinates with other departments the delivery of services, tools and/or equipment; compares records with contracts/purchase orders requirements and reports discrepancies to Management.
• Directs and coordinates activities of staff to obtain optimum efficiency and economy of operations and maximize profits.
• Review the timesheets of staff & equipment and the related financial dues.
• Set and manage the production budget.
• Work assignments carried out to the highest quality level.
• Must understand and comply with all safety rules and company policies of the company.
• Perform various other duties assigned by the line manager within the physical constraints of the job.

Job Requirements:

• Comfortable working in the office, Monday - Friday.
• Bachelor's Degree preferred in Accounting, Finance, Economics or comparable business related field plus Professional degree.
• Minimum of 5+ years of manufacturing accounting experience.
• Good understanding of Hyperion/ Oracle/ JD Edwards/ SAP, either one.
• Attention to detail with ability to translate into the big picture.
• Logical reasoning, critical thinking, and problem solving skills to troubleshoot issues.
• Organization and multi task skills.
• Ability to understand complex data and to work in a dynamic, fast-paced, demanding environment with time constraints.

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking an experienced Senior Supplier Quality Engineer (SQE) to lead quality and process optimization efforts across our supplier network, with a strong focus on mechanical processes (e.g., metal stamping, forging, brazing, die casting, CNC machining, and milling). The successful candidate will work within the electronics and computing sectors, particularly focusing on thermal cooling solutions, ensuring that our suppliers meet rigorous quality standards and process reliability. You will collaborate closely with suppliers to enhance product quality, optimize processes, and drive continuous improvement.

Key Responsibilities:

• Develop and implement systems to monitor and assess supplier quality. Ensure that materials and components, particularly those related to mechanical processes (e.g., metalworking, tooling, fixture and jig design), comply with specified standards. Address and resolve any non-conformance issues.
• Work closely with suppliers to optimize their manufacturing processes, such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive improvements in process yield and consistency to ensure the high quality of materials and components.
• Lead the resolution of abnormal quality issues in collaboration with suppliers, focusing on root cause analysis and the implementation of corrective and preventive actions.
• Perform detailed audits to evaluate suppliers' quality management systems and process capabilities, particularly in mechanical and metalworking processes. Ensure adherence to relevant industry standards, and drive improvement actions based on audit findings.
• Work in partnership with suppliers to develop and enhance their quality processes and manufacturing practices. Ensure that their systems align with company standards, especially in the areas of tooling design and fixture/jig manufacturing.
• Collaborate with internal teams (design, production, procurement) to ensure clear communication of quality expectations and standards.
• Promote a culture of continuous improvement within the supplier network, focusing on enhancing quality management systems and manufacturing practices for metal-based components and mechanical parts.

Requirements:

• Bachelor’s degree in Engineering, Quality Assurance, or a related field.
• Minimum 5-7 years of relevant experience in supplier quality engineering or a similar role within the manufacturing or electronics industry.
• Proven experience with mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling.
• Strong understanding of supplier quality management systems and industry standards.
• In-depth knowledge of metalworking, tooling design, and the manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and negotiation skills.
• Experience with supplier audits, corrective actions, and continuous improvement processes.
• Six Sigma certification (or similar qualifications) is advantageous.
• Willingness to travel and based in China and Vietnam at least 10 months per year. (includes four round-trip tickets to Singapore annually, with separate living arrangements provided)

Job Description

• Technical transfer product/project in assembly and testing, and from customers
• Provide technical support in manufacturing and testing in product build
• Provide technical support to QC in RMA issue
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit

Job Requirements:

• Minimum Diploma in Electronics Engineering
• At least 2 years of relevant work experience in Electronics Manufacturing industry
• Technical competent to handle product/project manufacturing, transfers and troubleshooting
• Experience in product/project, PCBA manufacturing and testing
• Able to liaise with customer on technical matters
• Experience in manufacturing environment with ISO13485 & FDA preferred
• Good communication and problem-solving skills
• Medical product experience and Quality Management System exposure preferred

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845

For over 50 years, SCIEX has been developing groundbreaking technologies and solutions in mass spectrometry and capillary electrophoresis. Our products enable our customers to quickly respond to environmental hazards, better understand biomarkers relevant to disease, improve patient care in the clinic, bring relevant drugs to market faster and keep food healthier and safer. At SCIEX, you’ll find a rewarding role that amplifies your impact on the world and helps you realize life’s potential.

SCIEX is one of 10 Life Sciences companies of Danaher. Together, we accelerate the discovery, development and delivery of solutions that safeguard and improve human health.

Learn about the Danaher Business System which makes everything possible.

Are you looking to use your knowledge and experience to empower our customers to solve the most impactful analytical challenges in quantitation and characterization?

The Manufacturing Test Engineer is responsible for setting up an efficient manufacturing test process by developing procedures (automated testing) to test mass spectrometer instruments and improving First Pass Yield continuously to meet the organization objectives. You will gain new product knowledge of mass spectrometer in theory and practical as well as enhancing your technical competency in engineering fields.

This position is part of the Manufacturing Engineering Department and will be located in Marsiling Industrial Estate, Singapore.

In this role, you will have the opportunity to:

• Develop the commissioning and final tests procedures (automated testing) to meet system requirements.
• Improve and modify manufacturing test software.
• Apply Problem Solving Process to define problem statements, investigate to root causes, verify countermeasures and ensure sustainment.
• Improve the First Pass Yield and parts DPPM failures in Manufacturing.
• Assist instrument installation escalation calls in the field through site visit/remote access if required.
• Expand PCBA troubleshooting skills to detect defective Electrical/Electronics components.
• Perform First Article Evaluation of Electrical/Electronic parts and software.

The essential requirements of the job include:

• Degree in Electrical and Electronics Engineering.
• 1-2 years of experience working in ISO 13485 manufacturing environment. Fresh graduates are encouraged to apply.
• Hands on experience in using measuring equipment like digital multimeter, oscilloscope, function generators, etc. during his/her university studies.
• Understand PCBA manufacturing process, able to read the PCBA schematic diagram and perform troubleshooting.
• Good knowledge in analog and digital electronics is desired.

Travel, Motor Vehicle Record & Physical/Environment Requirements:

• Ability to travel to North America for 1-2 months during project.
• Ability to lift, move or carry equipment up to 10kg daily.

It would be a plus if you also possess previous experience in:

• IPC-610 on Printed Circuit Board Assemble manufacturing process
• Operation and Application on mass spectrometer instruments

SCIEX, a Danaher company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job. Check out our benefits at danaherbenefitsinfo.com.

N/A

At Danaher we bring together science, technology and operational capabilities to accelerate the real-life impact of tomorrow’s science and technology. We partner with customers across the globe to help them solve their most complex challenges, architecting solutions that bring the power of science to life. Our global teams are pioneering what’s next across Life Sciences, Diagnostics, Biotechnology and beyond. For more information, visit www.danaher.com.

At Danaher, we value diversity and the existence of similarities and differences, both visible and not, found in our workforce, workplace and throughout the markets we serve. Our associates, customers and shareholders contribute unique and different perspectives as a result of these diverse attributes.

Job Scope:

You will be responsible for the end-end recruitment process, including but not limited to: compliant job postings, job launch, sourcing, phone screens, assessments, candidate tracking and status updates, interview feedback, conveying compensation expectations and offer extension. In addition, you will also coordinate recruiting process activities with key partners, hiring/closing candidates, and understand the full recruitment life cycle.

Essential Responsibilities:

• Responsible for blue collar volume hiring, both internal and external hires for the Singapore Plant
• Responsible for the wing-to-wing recruitment process, including but not limited to, managing job posting and process compliance, job launch, sourcing and screening of candidates, interview arrangement, candidate tracking and weekly status updates to business partners. Facilitate interview feedback sessions, prepare salary proposal, extend verbal offers and issue Employment Agreements
• Build strong relationships with stakeholders and develop expertise in their business and talent needs to create diverse talent pools and pipelines
• Collaborate with People Leaders and HR to ensure a positive candidate’s experience
• Utilize proactive and innovative sourcing strategies utilizing various techniques to reach out to talents
• Effectively use social media tools in alignment with the company's Brand Strategy
• Partner with local government bodies or institutions for career fairs
• Responsible for weekly reporting of TA metrics

Qualifications/ Requirements:

• Bachelor’s Degree/Diploma with 1- 2 years of recruiting and sourcing experience

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

EA License No. 01C4394 • RCB No. 200007268E •Derrick Tiew Yong Han EA Registration No. R1877971

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Exciting opportunity for a hands-on professional preferably in laser technology products to join an established company as a Manufacturing Engineer to help develop, evaluate and improve manufacturing methods and processes for the purpose of sustaining the manufacture of existing Laser products as well as the introduction of new products.

Role

· Provide day-to-day technical support for the production line including cleanroom, sub-assembly, optical build, and laser final test areas:

· Maintain quality, reliability, and cycle time standards of the current laser build process.

· Continuously improve current production methods using knowledge of product design, materials and parts, fabrication processes, tooling, production equipment capabilities, quality control standards, and warranty metrics.

· Take responsibility for electronic travelers, assembly and process methods, and bills of materials.

· Work with quality, reliability, and supply chain teams to improve product performance.

· Implement corrective actions for problems reported by our customer.

· Works on complex problems where analysis of situations or data requires an in-depth evaluation of various factors.

Requirements

· Bachelor’s degree in engineering (BEng) or its equivalents with at least 3 to 5 years of relevant work experience in Photonics or a related manufacturing field

· Possess technical expertise pertaining to Manufacturing, Assembly & Test Processes for mechanical assemblies, PCBA and optical components.

· Strong problem-solving skills and excellent knowledge in Six Sigma DMAIC approach, Lean principles, DOE, SPC, FMEA, GR&R and other quality improvement tools.

· Certified Six Sigma Green or Black Belt will be an advantage

· Excellent interpersonal skills with good verbal and written communication skills.

· Self-directed and able to work independently with little or no direct supervision.

Interested applicants, please submit your profile to [email protected]for review. We will be in touch for initial discussion upon being shortlisted

EA Licence: 17S8795 | EAP: R1108333

Responsibilities:

• Conduct thorough data analysis and implement data-driven solutions to support customer issue troubleshooting, utilizing statistical modelling and machine learning techniques to identify root causes and provide actionable insights for resolution
• Partner with field engineering teams to analyse data from plasma etching systems and provide timely, meaningful and accurate analysis results to support data-driven improvement
• Communicate effectively with both customers and internal teams, present complex data analysis findings or results to stakeholders in a concise, effective and understandable manner
• Develop advance statistical and machine learning algorithms to extract insights from large and complex data sets, and work with internal engineering team to evaluate the effectiveness of the algorithms
• Collaborate with global data engineering teams to share best practices and work on cross-functional projects that require data science expertise
• Manage and maintain the internal analytics solutions, supporting continuous development and implementation, and ensuring that data integrity and accuracy are always maintained
• Develop and conduct training sessions for local engineers on data analytics skills such as JMP and KNIME
• Other duties as assigned

Requirements:

• Bachelor’s or Master’s degree in Microelectronics, Data Science, or a related discipline.
• At least 3 years of experience in the semiconductor industry, including manufacturing equipment, fabrication facilities, semiconductor components, or related fields.
• Demonstrated experience as a Data Scientist within the semiconductor industry, with specific expertise in plasma dry etch processes.
• Expertise in developing and deploying algorithms for process optimization and problem-solving.
• Strong understanding of data analytics, statistical methodologies, machine learning techniques, and predictive modeling.
• Proficient in data science tools and programming languages (e.g., Python, JSL, R) for data processing, visualization, and analysis.
• Strong communication skills, with the ability to collaborate effectively in a team setting and build positive relationships with customers.
• Detail-oriented, organized, and resourceful team player.
• Self-motivated and capable of working independently with minimal supervision.

To apply, please visit www.gmprecruit.com and search for Job Reference: 24994

To learn more about this opportunity, please contact Yingying at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lai Yingying | Registration No: R1110239

This position requires the individual to performs electro-mechanical assembly operations, troubleshooting, repair & maintenance and testing of pneumatic systems/machine.

Duration: 12 months contract

Location: Upper Changi

Day Shift – 7.00am - 4.30pm

Noon Shift – 430pm to 130am ($25 Per Shift and one way transport home)

Job Duties:

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
• Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
• Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.
• Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes and involved in test.

Interested candidates may apply through the application system. We regret to inform that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• Reg. Reg No: R23117785 (Lok Ding Hann)

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)