Job Description:

The CPPS group is seeking a highly motivated senior research engineer or lead research engineer to lead and conduct R&D in Industry 5.0 smart manufacturing solutions and integrating digital technologies with AI-enabled physical production systems that promote human-centricity, environmental sustainability, and value chain resilience in manufacturing. The ideal candidate should have a strong background in controls, integration and PLC programming. The key roles & responsibilities include, but are not limited to the following:

• Conduct R&D in novel adaptive and autonomous control algorithms for scalable self-learning, self-optimizing and self-recovery production systems
• Work with a team of engineers and scientist to design and implement integrated IIOT and AI-enabled production systems for smart manufacturing
• Understand autonomous manufacturing domain and provide innovative solutions to industry problems in this area
• Familiarity with industry communication protocols such as OPC-UA, MQTT, Profibus, and RS-232 is an advantage

Job Requirement:

• Masters or Bachelor degree in Computer Science / Engineering, Electrical Engineering, Mechanical Engineering, with emphasis on controls, integration and automation
• 1-3 years experience in industry and/or R&D projects in the area of controls and IIOT (min. 5 years for Lead Research Engineer).
• Develop and program PLCs and other control systems, utilizing platforms like TwinCAT, EcoStruxure, Codesys and others.
• Ability to apprehend and/or interpret electrical circuit diagrams is a strong advantage
• Excellent technical presentation and writing skills
• Can-do attitude and able to work with different needs of various stakeholders
• Proactive team player and technically motivated to solve problems innovatively

Job Description:

- Setting up and operate CNC machining center and CNC Lathe

- Carry out daily housekeeping in the work area after each work shift

- Responsible to work safely and comply with all the safety work procedures and practices

Job Requirements:

- Nitec in Mechanical Engineering or Precision Machining

- Able to understand and interpret of mechanical blue print

- Able to use of measuring instrument

Job Description:

• Assisting in the media publishing and content creation for production team/marketing
• Coordinate pre-production duties
• Coordinate production work
• Prepare equipment and accessories for video production
• Setup camera, lighting and production peripheral equipment
• Partake in content creation discussion and execution
• Establish project timeline, activities, resource plans, cost estimates
• Gain consensus on project goals, objectives and deliverables
• Acquire project requirements such as crew, information, agreements, material, or props as needed

Job requirements:

• Above 18 years old
• Positive attitude
• Interest in video editing/video production (Eg. Premiere Pro, Final Cut Pro)
• Able to handle heavy equipment
• Able to commit to weekends
• Team player
• No minimum experience required
• An added benefit if have relevant experience or a portfolio

Responsibilities:

• Conduct forecasting and planning of materials to ensure smooth production process
• Schedule and plan production activities based on job orders
• Monitor the lead time of producing the finished product
• Update and check inventory physical stock and arrange production of finished goods to meet the sales order
• Ensure production schedule meet the delivery date
• Liaise with suppliers for powder coating
• Troubleshoot discrepancies and quality issues

Requirements:

• Experience in aluminium working sector and manufacturing
• Able to lead team members on production and installation
• Have experience in working machineries
• Able to read technical and installation drawings
• Ensure products and install quality
• Planning of production schedules and allocate sufficient Manpower
• Implementation production processes and maximize efficiency and reduce production waste
• Implementing continuous process improvements
• Preparing material and equipment lists, PO, cost analyses and estimated cost
• Provide training staff for new production teams
• Working hours & days: 6 days work per week 8:30am to 5:30pm.
• Working location - Ubi

Highlights

• Lunch provided
• In-house gym facility
• Short walking distance from Tuas Link MRT

Job Responsibilities

• Process ready goods
• Mix and process ingredients according to recipes
• Perform packing, labeling and storage duties according to SOPs.
• Clean and sanitize the production kitchen with proper cleaning agents.
• Assist other areas of production as required by the Production Supervisor / Manager.
• Perform other ad-hoc duties as assigned

Requirements

• Candidate must be physically fit as he/she is required to lift and carry heavy loads and work in a cold environment
• Candidates able to perform simple machinery maintenance and repairs have an added advantage
• Candidates possessing valid Food Hygiene Certificates have an added advantage
• Able to work in a team and provide assistance to colleagues where needed

Part-Time positions are available.

Job Description:

1) Plan production schedule and maintain inventory levels

2) Coordinate and provide training to production staff

3) Assist in equipment maintenance

4) Apply corrective actions for shut-downs during critical and emergency situations

5) Monitor and maintain manufacturing processes

6) Apply food production standards and SOPs related to safety and hygiene policies.

7) Coordinate with teams to resolve inter-discipline issues

8) Improve operation planning using data analytics and data presentation during meetings

9) Housekeeping and General duties as required

Requirements:

• Team player with initiative, drive & good communication skills
• Possess positive working attitude
• Able to work on shifts and weekends/ PH.
• Able to work overtime.
• Physically able to lift and carry up to 3kg of goods.

Job Responsibilities and Duties

• Assist to execute daily production control activities, such as Production Scheduling, Line Balancing and manpower planning.
• Assist to execute daily quality control activities, such as Adherence to all SOP requirements as per respective regulatory guidelines GMP, Halal, GDP Medical Device & Therapeutic products.
• To ensure documentation and records are proper and complete.
• To ensure housekeeping & cleaning of the production equipment’s and facilities are completed.
• To carry out production activities as per production operators and hand packers.
• To execute maintenance activities.
• Any other duties assigned by superior / management.

Key Performance Indicators: -

• Ensure daily production targets are carried out and timely and accurately
• Ensuring all documents and records are accurate and complete.
• Ensure production equipment’s and facilities are carried out daily.

Job Description

1. Design & Development for Special/New Product

2. Claim Handling -Investigate and response to customer claim

3. Conduct Functional & Life Testing

4. Involve in Production rationalization & SDG projects

5. Global Supplier Expansion – Evaluation and qualification of supplier, parts, process

6. Install & Commissioning of production facilities

7. Improvement Project Work:

• Study, propose, and implement projects.
• Rationalize processes and facilities for improve efficiency, quality, cost, and safety.
• Set up new processes or facilities.
• Design and build facilities.

Job Requirements

1. Technical Skills:

· Passion for mechanical automation technology.

· Strong technical inclination, including understanding system design and working principles.

· Hands-on approach – willing to engage in practical work, not just desk-based tasks.

· Minimum 2 years of experience in a related engineering field.

· Preferably possesses knowledge in CAD, PLC, Machine Vision, and Robotics.

2. Personality Traits:

· Committed and self-initiative, with a proactive approach to problem-solving.

· Creative problem solver, thinking innovatively to address challenges.

· Curious with a thirst for knowledge, willing to refer to manuals and undertake self-study.

· Logical thinker with a hands-on mentality, implementing improvements and troubleshooting effectively.

· Sense of responsibility and urgency in addressing issues independently.

3. Communication Skills:

· Cooperative and able to work effectively in a team.

· Proficient in technical report writing.

· Strong communication skills to convey ideas and solutions effectively.

· Able to communicate in Japanese will be an added advantage

Job Summary:

Comply with the management regulation of company and department, working according to MPI’s, QI’s and other WI’s strictly.

Essential Duties and Responsibilities:

Include the following. Other duties may be assigned.

• Responsible for the safe operations of equipment to manufacture products. Perform checks and ensure safety features (machine guarding, interlocks, etc) is in place and under any circumstances should not bypass.
• Maintain 6S in working area. Follow standard
• Report immediately to direct supervisor if any safety features (machine guarding, interlocks, etc) are not functional or present some alteration.
• Comply with the management regulation of company and department, obey the job assignment.
• Operation must be conducted according to WI strictly，and familiar with their related responsibility
• Deal with other assignments assigned by superior.

Responsibilities:

• Conduct forecasting and planning of materials to ensure smooth production process.
• Schedule and plan production activities based on job orders.
• Monitor the lead time of producing the finished product.
• Update and check inventory physical stock and arrange production of finished goods to meet the sales order.
• Ensure production schedule meet the delivery date.
• Liaise with suppliers for powder coating.
• Troubleshoot discrepancies and quality issues.

Requirements:

• Experience in aluminium working sector and manufacturing.
• Able to lead team members on production and installation.
• Have experience in working machineries.
• Able to read technical and installation drawings.
• Ensure products and install quality.
• Planning of production schedules and allocate sufficient Manpower.
• Implementation production processes and maximize efficiency and reduce production waste.
• Implementing continuous process improvements.
• Preparing material and equipment lists, PO, cost analyses and estimated cost.
• Provide training staff for new production teams.
• Working hours &days : 6 days work week, off on Sunday,8:30am to 5:30pm.
• Working location - Ubi

JOB RESPONSIBILITY

You will be learning the latest operational aspects of the highly proprietary processes.

You are expected to understand and comply with all Corporate and Plant EHS rules/policies/procedures. You will work closely with Process Engineers in learning the process and equipment troubleshooting, establishing the work centre document (SOP) system, and training all Manufacturing Assistants. You will also assist Production Supervisors in fulfilling shipments with good quality products to customers on time. You will also be involved in Kaizen activities and contribute to the continuous improvement of the operations team.

REQUIREMENTS

• Diploma in Mechanical/Chemical/Electronics Engineering or equivalent relevant experience
• Minimum 3 years of manufacturing experience. Those without manufacturing experience may also apply
• Good statistical background with knowledge of Lean/Six-Sigma methodologies
• Good written and oral communication skills
• Able to work effectively with multi-disciplinary teams
• Able to perform 12-hour rotating shifts

Job Description

• Liaise with internal and External Partners to drive SIMTech Technology /solutions adoption
• Compile Market Intelligent for assgined industry and identify businesss opportunities and competition
• Strategise with SMC director and other stakeholder to develop effective initiative for assigned industry /solutions
• Meet IDO KPI : Billed Revenue, IRS Cash, T-up , licensing revenue , Success stories , etc
• Develop marketing collateral for SMC - for different products and solutions
• Organise marketing event - seminar , workshop and talk to promote SIMTech technology and solutions
• Handle and negotiate terms of business and IP ownership for each projects

Manage all agreement - NDA, RCA and MOU

Candidate must have good knowledge & capability

• Business law and terms of business
• Sustainability solutions, technology and trends
• Business development capability
• Negotiation and abilityto develop good business relationship with customers

1. In charge of Production and Logistics

2. Work closely with Management and Production

3. Responsibilities of the job include: planning and organizing production schedules.

4. Ensure that manufacturing processes run reliably and efficiently.

5. Friendly and hardworking

• Well Established Company
• Basic $3000 - $3500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 6.30pm

Job Responsibilities:

• Lead and supervise a team of QC inspectors overseeing daily QC inspections activities in compliance with established standards
• Provide training, coaching and mentoring to enhance the skills and performance of team members
• Prepare and maintain work schedule for the department to ensure optimize resource for overall efficiency
• Work with cross-functional teams to implement continuous improvement, track status of non-conformities and CAPA effectiveness
• Responsible for review and approval of DHR. Ensure quality records and samples are retained complying with good writing practice GDP requirements
• Implement quality documentation changes, such as QC procedures, process workflows, work instructions, etc. Guide the team to follow through the change
• Review and submit validation or verification measurement reports
• Perform daily process audit to meet quality operational requirements
• Ensure product identification and traceability of product are in place
• As calibration administrator, ensure equipment are calibrated correctly, provide accurate measurements and having proper identification
• Assist in customer complaint analysis, investigation of quality issues and corresponding improvement measures
• Authorize the release (COC) of products, COA review and approval
• Adhere to safety protocols and implement preventive measures to maintain a safe working environment
• Monitor and report KPI of QC team job performance, production quality trends, quality control charts, etc.
• Any other tasks as assigned by the superior

Job Requirements:

• Possess minimum professional certification / Diploma / Degree in relevant subject area
• Working knowledge on ISO13485:2016 and quality assurance / quality control of medical devices is an added advantage
• Familiar with use of various quality control tools and test equipment

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Production Engineer

• Working hours: 5 Days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong East MRT)
• Salary Range: $4500 - $6000

Position Summary:
The Production Engineer is responsible for improving the production technology of the EVAL site which will be launched in second half of 2026. The Production Engineer supports the production team for identifying, investigating, and resolving production issues in technical aspects. The Production Engineer leads technology for process control (DCS, SIS), operation condition, and product quality improvement and joins project work related to production technology development and improvement. Until the startup of EVAL production line, training and learning opportunities of EVAL production technology is provided by experienced members in Company. The Production Engineer will be a member of the commissioning and startup team of new EVAL plant and is responsible for designing and optimizing the process condition and process control system (DCS) and supports other production team members to achieve safe and stable commissioning and startup of new EVAL plant.

Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Minimum Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in Chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Preferred Requirements:

• Master’s degree in chemical engineering
• Knowledge and experience in chemical process simulations (e.g. polymerization, other reaction process, distillation, drying, and so on)
• Technical understanding of polymer extrusion process
• Knowledge of DCS programming and parameter tuning (PID control)
• Experience in lean manufacturing methods (e.g. 5S, Six Sigma, Kaizen, TPM)
• High proficiency in Excel including VBA, macros, or other related software engineering tools.
• Experience with leading Capex projects
• Experience with Management of Change (MOC), Process safety assessment (PHA, HAZOP, LOPA, FMEA, QRA, etc.), and Root Cause Analysis (RCA).

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• MNC Company
• Basic $4500 - $6000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Company Transport Provided)
• Working day: Monday to Friday
• Working hours: 8am to 4.30pm

Job Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Handle the Precast Concrete Production in the factory.
• Understand the design drawings and production drawings and conduct quality check.
• Liaise with all the relevant parties for production and inspection of the factory.
• Manage the Suppliers and Contractors to rectify if there are any defects prior to delivery to site.

Requirements:

• Diploma in Civil Engineering or equivalent
• At least 4 years of PPVC and/or PBU Production control experience.
• Proficient with ICTs, Digital Progress control/monitor.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Description

• Industry/ Organization Type: Manufacturing/ Semiconductor
• Position Title: Production Operator
• Working Location: Woodlands (walking distance from MRT)
• Working Hours: 5 Days, Mon - Fri (11.30pm – 8.30am)
• Salary Package: Basic Salary + Shift Allowance + OT + AWS
• Duration: Permanent

Key Responsibilities

• Operate and maintain manufacturing equipment.
• Monitor production process and perform routine quality checks.
• Troubleshoot equipment issues and perform minor repairs.
• Adhere to cleanroom standards and safety protocols.
• Record the production data.
• Other ad hoc tasks as assigned.

APPLY NOW!!!

• Minimum GCE N-Level.
• Willing to commit night shift work hours.
• Candidates without experience are welcome to apply, training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #65911 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

• Execute daily production activities on the production line according to work instructions, including tofu making operations.
• Ensure cleanliness and hygiene standards are maintained in the production area.

Requirements:

• PSLE and above
• At least 1 year of relevant working experience.
• Able to work in hot, humid and wet environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Our client is a Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quotation Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Review and comprehend technical requirements outlined in customer tender documents.
• Coordinate with internal teams to collect essential data for proposal development.
• Provide technical expertise during tendering and quotation processes/activities and support the sales and marketing team with relevant engineering insights.
• Prepare cost breakdowns and delivery schedules to assist the sales and proposals team in responding to inquiries.
• Draft and compile technical documentation, such as datasheets, proposal designs, clarification notes, and responses to tender specifications.
• All other ad-hoc duties as assigned.

Requirements

• Min Degree in Relevant Qualification in Engineering or equivalent.
• Min 5 years relevant working experience.
• Proficient in Microsoft Office and CAD software.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Our client is a Manufacturing MNC. Due to business needs, they are now recruiting a Sales Coordinator to be part of their Sales Team for ongoing transformation projects. They are located in the West - easily accessible.

Duties of Sales Coordinator:

• Accurately process sales orders in the system, ensuring correct product details, pricing, and customer information.
• Prepare and maintain sales documents, including quotations, invoices, contracts, and sales reports.
• Assist the sales team in preparing presentations, proposals, and any other necessary documents.

Requirements:

• Relevant experience
• Experience with SAP or ERP System

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Our client is specialized in the production and distribution of disposable medical devices.

• Perform technical support for daily manufacturing operation.
• Ensure all equipment are well maintained.
• Assists in machine and equipment improvement and upgrade.

Requirements:

• Nitec in Engineering or equivalent
• At least 3 years of troubleshooting equipment failure and handling technical issues experience in cGMP manufacturing environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client is a global manufacturer. Due to business needs, they are now recruiting a FP&A Accountant to be part of their FP&A team for ongoing transformation projects. They are located in the North Area - easily accessible.

Responsibility:

• Coordinate the preparation, compilation, and analysis of the Annual Budget prior to its submission to the corporate office.
• Analyze financial variances and take a proactive approach by conducting meetings with operations departments to review and discuss monthly forecast performance.
• Synthesize complex data from various sources and transform it into comprehensive management reports.
• Scrutinize a wide range of records and engage with various departments to ensure data accuracy and reliability.
• Oversee SOX compliance and address internal and external audit queries.
• Enhance processes and actively participate in ad-hoc LEAN projects.

Requirements:

• Min Degree in Finance / Accountancy or any related field
• Minimum 5 years experience in FP&A and SOX
• Experience in manufacturing industry is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)