1. JOB DESCRIPTION

Job Title

Assistant Production Engineer

Job Description & Requirements

Overview

As an Production Engineer (Senior / Assistant), you will assist the Production Manager in managing the Overall Operation of Precast Cconstruction Plant. You are to adhere to Quality, Environmental, Safety Management System in accordance with Company’s standards and customers’ requirements.

Responsibilities

1) Identifies operational problems by observing and studying system functioning and performance results; investigating complaints and suggestions; interviewing process supervisors and operators; completing troubleshooting procedures.

2) Identifies operational priorities by assessing operational objectives; determining project objectives, such as, efficiency, cost savings, energy conservation, operator convenience, safety, environmental quality; estimating relevance, time, and costs.

3) Develops operational solutions by defining, studying, estimating, and screening alternative solutions; calculating economics; determining impact on total system.

4) Anticipates operational problems by studying operating targets, modes of operation, limitations & performance.

5) Improves operational quality results by studying, evaluating, and recommending process re-design; implementing changes; contributing information and opinion to improve productivity performance.

6) Provides operational management information by collecting, analyzing, and summarizing operating and engineering data and trends.

7) Maintains safe and healthy work environment by following and enforcing standards and procedures; complying with legal regulations.

8) Participate in reviewing Company Quality, Environmental, Safety and Health Risk Assessment to ensure its effectiveness.

9) Participate in investigation of EHS incident and recommend preventive measure.

10) Authorize to stop production relating to Safety, Environmental or Efficiency issue not complying to Company Quality, Environmental, Safety and Health Management System or Procedure.

11) Verify that solutions agreed for problems relating to non-conformities relating to product process and Company Quality, Environmental, Safety and Healthsystem are implemented.

12) Review and recommend the disposition of the rejected in-coming raw material, work-in-process and finished goods.

13) Review and endorse Company Quality, Environmental, Safety and Health System Procedure.

14) Manage, coach and train the team members which include carrying out performance review and disciplinary action, if required.

15) Perform any other duties as assigned by the Management and the designated manager.

Requirements

1) Minimum ITE

a) Preferably in Fabrication / Civil Engineering

b) 5 years’ experience working as Engineer or 8 years’ as Technician in a manufacturing environment

2) Diploma in Engineering

a) Preferably in Fabrication / Civil Engineering

b) 2 years’ experience working as Engineer in a manufacturing environment

3) Preferably with knowledge of manufacturing and assembling of Precasting.

4) Knowledge of ISO 9001, 14001 & 45001 standards and AutoCAD will be advantages.

5) Knowledge in Safety Management is a must.

6) IT savvy with proficient in Microsoft Office application.

7) Possess leadership and supervisory skills with manpower planning experiences.

8) Possess problem-solving, analyzing and reporting skills.

9) Possess good interpersonal skills and excellent team spirit.

10) Independent with high level of initiative and fast learner.

11) Meticulous and positive attitude in learning.

Company Overview:

Qi Tian is a leading provider of custom full-home solutions, specializing in wood and iron structures for residential and commercial spaces. We pride ourselves on delivering high-quality, sustainable, and innovative products.

We are currently looking for a Production & Product Manager to join our dynamic team. This role is essential to streamline production processes, manage resources effectively, and ensure the delivery of exceptional products.

Key Responsibilities:

• Oversee the production line operations, ensuring optimal allocation of manpower, materials, and machinery.

• Develop and implement strategies to improve production efficiency and reduce waste.

• Manage inventory of raw materials, including wood and iron, and ensure timely procurement.

• Coordinate production schedules to meet customer demands and project deadlines.

• Supervise and train team members, fostering a culture of collaboration and excellence.

• Ensure adherence to quality standards and safety regulations.

• Maintain clear communication between production, logistics, and sales teams to ensure smooth operations.

• Provide technical expertise in board materials, including understanding specifications and applications.

Requirements:

• Proven experience in production management, preferably in wood or metal manufacturing.

• Strong knowledge of board materials (e.g., plywood, MDF, particleboard) and ironwork.

• Excellent organizational and problem-solving skills.

• Ability to optimize workflows and allocate resources effectively.

• Familiarity with production machinery and maintenance processes.

• Strong leadership and team management skills.

• Fluent in English; additional languages are a plus.

What We Offer:

• Competitive salary and performance-based incentives.

• Opportunities for professional development and career growth.

• A collaborative and innovative work environment.

Salary: $4500+commision, 6 days a week, 7 days leave a year, 7 days mc a year

Location: Singapore

If you are passionate about leading a production team and have a keen understanding of custom wood and ironworks, we want to hear from you!

How to Apply:

Send your resume and cover letter to [your email address]. Please include “Production & Product Manager Application” in the subject line.

Join us in shaping the future of custom home solutions!

- Able to lead, manage & motivate a team of operator & handler

- Assist in own department's manpower planning and deployment

- Ensure effective implementation of process procedure in production

- Ensure efficient and effective communications inter and intra departments

- Assist in ensuring smooth running of department operations of shift on duty

- Troubleshoot quality issue caused by production

Train operator in the production process to ensure that they work efficiently and safety

. JOB DESCRIPTION

Job Title

Carpentry production manager

Occupation

Supervisor and General Foreman (Furniture and Related Products Manufacturing)

Job Description & Requirements

Roles & Responsibilities

Must have at least 5 years experience

Must follow instruction and hard working and cooperative

Liaising with clients, suppliers and other construction professionals

Reading blueprints and designs to work to specifications prepared by other construction professionals, architects and building code recommendations

Starting from cutting and paste to build and install the finished carpentry work at the project site.

Good knowledge with the materials.

Good understanding of the drawings.

Good time management and teamwork spirits.

Note: This role requires frequent travel and will be based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Key Responsibilities:

• Implement advanced monitoring systems to ensure product quality and optimize yield in electronics manufacturing.
• Proactively identify areas for improvement and develop strategies to enhance overall product quality.
• Lead initiatives to address and resolve abnormal quality issues within the manufacturing process.
• Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Drive efforts to improve internal quality control procedures and enhance process capability.
• Implement best practices to streamline processes and maximize operational efficiency.
• Lead initiatives to resolve customer-reported quality issues, ensuring timely and effective resolutions.
• Prepare detailed reports for stakeholders outlining corrective actions and preventive measures.
• Develop and implement strategies to optimize quality inspection processes.
• Identify opportunities for automation and technological advancements to enhance inspection efficiency.
• Foster open communication and collaboration across departments for effective quality management.
• Coordinate with various teams to ensure a unified approach toward achieving quality objectives.
• Manage personnel-related tasks, including task assignments, coordination, attendance, and performance management.
• Develop and implement training programs to enhance team skills and knowledge.
• Oversee the timely delivery of tasks and projects to meet quality objectives within established timelines.

Requirements:

• Bachelor’s degree in a relevant field; advanced degree preferred.
• A minimum of 6-8 years of proven experience in quality management, particularly within manufacturing processes.
• Strong analytical and problem-solving skills.
• Excellent leadership and interpersonal skills.
• Familiarity with quality management systems and standards such as TS16949 and VDA 6.3.
• Experience collaborating with counterparts in China/Taiwan.
• Certification in quality management (e.g., Six Sigma) is advantageous.
• Willingness to travel frequently and be based in China and Vietnam for at least 10 months per year (separate living accommodations provided). The role includes annual 4 round-trip tickets back to Singapore.

Responsibilities

• Collaborate with the production and planning teams to prioritize tooling schedules based on the current tool status and production demands.
• Provide technical support to the tool designing and sales teams, ensuring that customer requirements are met through effective tooling solutions.
• Take a leadership role in problem-solving and troubleshooting within the tooling team, identifying root causes and implementing corrective actions.
• Support continuous process improvements for tooling and work processes to enhance productivity and efficiency across the department.
• Work closely with the toolroom to identify machining needs for tooling modifications and improvements, ensuring tool readiness for production requirements.
• Oversee and guide the toolmakers, training them to enhance their skills and ensuring high-quality standards are maintained in all tooling activities.

Requirements:

• Diploma in Precision Engineering or equivalent.
• Technical qualification in Tool & Die Making or a related field.
• Ability to lead and manage a team, fostering collaboration and continuous improvement.
• Strong problem-solving skills with experience in root cause analysis and troubleshooting.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: L739Y7RX

Job description

This position will work directly with healthcare professionals, advanced manufacturing providers, as well as engineering teams across the globe, to realize the design requirements for novel medical devices. The Manufacturing Systems Engineer will also manage manufacturing and prototyping projects and demonstrate additive manufacturing technologies, providing knowledge, design feasibility studies, production workflow, and product commercialization expertise.

Responsibilities

● Liaise with service providers and technology centers for advanced and additive manufacturing to transfer expertise and communicate design requirements.

● Manage internal production and maintenance schedules for manufacturing tools.

● Support the development of medical devices, implants, and instruments from concept to market launch. Responsibilities will cover all aspects of the design process, including research, prototyping, laboratory testing, iterating, design for manufacturing, and detailed design of final parts and assemblies.

● Work in a collaborative environment, interacting with cross-functional teams (Product & Project Management, Quality/Regulatory, Operations, and Marketing).

● Develop product requirements and product specifications based on user requirements.

● Fabricate and test components and assemblies as needed for product development.

● Source appropriate vendors to manufacture products and oversee their procedures and workmanship.

● Create manufacturing process instructions, raw material specifications, and qualification/validation protocols and reports.

● Creation of test protocols/reports, design review reports, risk management reports, and other supporting documents to comply with the design control processes

● Perform verification/validation testing as required.

● Support all technical aspects of the product and instruments.

● Support regulatory and quality requirements in compliance to ISO 13485:2016 and FDA regulations.

● In the event of potential non-compliance with applicable standards or regulations (e.g. FDA QSRs, ISO 13485:2016, or ISO14971), the employee has the responsibility to report any instances to their direct supervisor or above.

Qualifications

● 3+ years in additive manufacturing technologies

● Proficient with CAD software (SolidWorks preferred),, geometric dimensioning and tolerancing, and tolerance analyses.

● Proficient with additive manufacturing build preparation software such as Materialise Magics and 3DXpert

● Experience with analytical tools such as Finite-Element-Analysis is a plus.

● Must understand manufacturing processes including additive manufacturing.

● Experience with 3D printing technologies such as Laser Powder Bed Fusion, E-beam Powder Bed Fusion, Binder Jetting. from print to post-processing

● Experience with design thinking, rapid prototyping, and fabrication/assembly a plus

● Must demonstrate strong written and verbal skills with experience presenting technical information in a small group setting.

● Must work well in a small team and fast-paced environment.

● Have a track record for successful engineering projects through innovative engineering solutions and cost-effective manufacturing, followed by product support and improvement.

● Have a demonstrated ability to communicate effectively in multidisciplinary settings and work well with co-workers, surgeons, clinicians, regulators, and distributor representatives.

● Have a working cross-disciplinary understanding of a medical device business focused on engineering, manufacturing, operations, R&D, clinical and regulatory, and quality assurance.

● Be a proactive person who attacks problems, displaying initiative and perseverance to bring about meaningful change, and to be open and responsive to new ideas.

● Be known as a person who has high integrity, sound character, a tremendous work ethic and the passion to succeed.

Education Requirements

● B.S. required in engineering, design or equivalent work experience.

● M.S. in Mechanical or Industrial Engineering is a plus

● Must have a strong passion for product and process excellence and customer satisfaction.

● Medical device industry experience is strongly preferred.

• Involve revese enginnering based on part given.
• Create the part drawing from the component by measuring and prepare the new cnc program.
• Lead a programmer and machinist to successfully deliver the cam program for precision machined component projects
• Work closely with senior management to prepare quotation and concept dedign for new projects
• Prepare and track schedules for live projects - manage deliverables targets by designers and drafters
• Train and groom new Cnc 3d cam programmer / machinist in company
• Create, maintain and enforce workflow processes to enhance design department efficiency
• Manage team KPIs

• Gained extensive experience in a food manufacturing environment, specializing in packaging soy-based and granola products according to various standards.
• Periodically performed warehousing tasks, including carton assembly, order picking, and receiving new inventory.
• Recorded receiving and order data accurately into forms or computer systems.
• Prepared and completed order documentation and reports as required.
• Adhered to all food safety protocols and compliance regulations.
• Packaged products such as soy milk pouches, granola bars, and pancake/wafer mixes into boxes or bags.
• Transported product trays to designated racks or storage locations.
• Conducted visual inspections and maintained documentation during production to ensure defect-free results.
• Assisted line mechanics with machinery repairs or other necessary tasks when required.
• Followed assignments provided by team leaders for tasks directly or indirectly related to the production line.

• Experience in application support role for min 5 years for support and good knowledge of Java, Unix/Linux, SQL
• Experience in Unix commands , SQL queries
• Experience in programming languages such as JAVA/J2EE.
• Knowledge of web applications, batch jobs, JBOSS, MariaDB, SQL, Shell
• Knowledge of Job scheduling, MQ setup
• Dynamic individual with thirst to learn
• Strong team player with excellent inter-personal skills & ability to meet SLAs

Responsibilities:

• Provide technical support in process engineering to facilitate production operations.
• Advice, support and carry out machine acceptance tests, qualification, and validation of production processes and equipment.
• Lead or participate in the investigation, troubleshooting, and root cause analysis for various production events and equipment failures; ensure that all relevant CAPAs are completed timely.
• Ensure adequate preventive & predictive maintenance to reduce equipment failures while maintaining quality and productivity; ensure adequate spare part inventory to meet the critical maintenance requirement.
• Work with and supervise vendors/contractors to ensure installation, repairs, or maintenance works are carried out timely and with minimal disruption to operations.
• Ensure compliance with GMP, regulatory requirements, ISO standards, EHS standards, and other relevant policies/standards.
• Ensure workplace safety and be responsible for notifying Management in a timely manner of EHS/GMP deficiencies.
• Support plant automation, Industry 4.0, and digital manufacturing initiatives.
• Any other duties and responsibilities as assigned by the Manager.

Requirements:

• Tertiary education in Electrical/Mechanical Engineering
• Minimum 3 years of related experience as a manufacturing process engineer in a Cosmetic, Food, or Pharmaceutical Manufacturing environment
• Well versed in GMP
• Good experience in automation and Industry 4.0 plant will be useful for work.
• Good communication and interpersonal skills
• Systematic and able to work under pressure
• Excellent analytical and good engineering problem-solving skills, workload resource planning, and prioritization skills
• An independent self-starter and a strong team player

Project Description:

Treasury application Production support engagement covering technical issues, services and environment monitoring and EOD Batch support for a leading Singapore based bank

Responsibilities:

• L1 & L2 application technical and functional support in production treasury application support environment
• Monitoring and issue resolution of online trade booking applications
• Resolving technical services related issues, environment management and EOD batch support in morning/night/weekend shifts- 24/7
• Production support of Java/microservices application

Mandatory Skills Description:

• 0.5-2 years of experience in production application support environment
• Ability to read unix logs for debugging and troubleshooting.
• SQL experience is needed to fetch data
• Experience in providing L1 & L2 application technical and functional support
• Excellent team collaboration
• Excellent written and verbal communication skills
• Strong stakeholder management
• Flexible in working in shift timings and over weekends

Nice-to-Have Skills Description:

• Control-m experience
• Experience with Murex

Find Your Dream Job with Us

WE ARE HIRING!! Apply now and make a difference.

Role: Production Support Analyst

Job Requisition Number: JR46056

Job Level: 3-5 years of relevant experience (L2)

Location: Singapore

Job Objectives

Group Technology and Operations (GTO) provides software and system development, information technology support services and banking operations.

We have centralized and standardized the technology components into Singapore, creating a global footprint which can be utilized for supporting our regional subsidiaries and the branches around the world. We operate and support 19 countries with this architecture to provide a secure and flexible banking infrastructure.

Our operations divisions provide transactional customer services for our businesses while also focusing on cost efficiency through process improvements, automation and straight through processing.

Key Responsibilities

· Deliver a 1st class Production Support service to Channel’s stakeholders

· Responsible for availability, incident, problem and capacity management for the applications in scope

· Response and resolve incidents, problem and user queries through proper analysis

· Manage communication for Incidents (SLA breaches, Application Major Incidents, Logistics issue) and responsible for communications within team, manager and department

· Drive technical remediation in line with agreed non-functional requirements

· Evidence continual service improvement of processes and tasks (via automation)

· Ensures essential process / procedures are followed and contribute to defining standards.

· Coach and be receptive to coaching to uplift the team’s and your individual knowledge

· Communicate complex technical issues to business users in a language they understand

· Contribute in effective knowledge management best practices within team and organization

· Work closely with 1st & 3rd level support and development teams to the incidents, problem and users queries are resolved within SLA

Key Requirements:

Education:

· Bachelor’s degree in computer science or related field.

· At least 6 years’ relevant experience, preferably in a Finance Institution.

Essential:

· 5 + years of experience working in Banking IT industry support. Experience in Microsoft Dynamics CRM and Siebel CRM applications.

· Strong team player. Flexible and being able to manage time effectively.

· Able to work with a sense of urgency under multiple deadlines and successfully organize and complete tasks with minimal supervision.

· Experience in L2 / L3 support in a Production Support group in a high availability / mission critical environment.

· Strong understanding of ITIL methodology

Technical Skills:

· 5+ years of experience with Distributed Technologies – Microsoft Dynamics CRM, MS SQL Server, Unix, MQ, Oracle.

· Strong working experience in Microsoft Dynamics CRM application production support

· Strong understanding of Microsoft Dynamics CRM application architecture

· Excellent troubleshooting skills in Control-m batch issues, SSIS packages

· Strong automation skills (Unix Shell scripting / windows batch scripting or any other scripting language)

· Hands-On experience in writing / debugging scripts, code, and database queries

· Software Engineering & Change Management

· Solid understanding and execution of DR & BCP

· Good experience in Middleware MQ / BMC / Control-M/Remedy incident Management tools

· Competent in Microsoft Excel, PowerPoint and Word document

Please forward your resume in MS word format to [email protected] and

[email protected]

Please refer your friends for any IT openings as we have various positions.

Please do not send PDF Format Resume . Send the following details

1. Notice period

2. Current Salary

3. Expected Salary

4. Visa Status in Singapore

5. Current Location

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

Looking for Production/ Site workers.

At least a SPM holder.

Willing to work hard.

Able to commit Saturdays.

Preferable have experience working in factory/ site

Do metal/ factory/ site work.

ATTRACTIVE SALARY + GUARANTEE BONUS *

Please contact / whatsapp HR +65 84828628 ONLY. Thanks.

Salary range offered: $2,800 to $3,000

Whatsapp: +65 8341 1076