Production Engineer

• Working hours: 5 Days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong East MRT)
• Salary Range: $4500 - $6000

Position Summary:
The Production Engineer is responsible for improving the production technology of the EVAL site which will be launched in second half of 2026. The Production Engineer supports the production team for identifying, investigating, and resolving production issues in technical aspects. The Production Engineer leads technology for process control (DCS, SIS), operation condition, and product quality improvement and joins project work related to production technology development and improvement. Until the startup of EVAL production line, training and learning opportunities of EVAL production technology is provided by experienced members in Company. The Production Engineer will be a member of the commissioning and startup team of new EVAL plant and is responsible for designing and optimizing the process condition and process control system (DCS) and supports other production team members to achieve safe and stable commissioning and startup of new EVAL plant.

Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Minimum Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in Chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Preferred Requirements:

• Master’s degree in chemical engineering
• Knowledge and experience in chemical process simulations (e.g. polymerization, other reaction process, distillation, drying, and so on)
• Technical understanding of polymer extrusion process
• Knowledge of DCS programming and parameter tuning (PID control)
• Experience in lean manufacturing methods (e.g. 5S, Six Sigma, Kaizen, TPM)
• High proficiency in Excel including VBA, macros, or other related software engineering tools.
• Experience with leading Capex projects
• Experience with Management of Change (MOC), Process safety assessment (PHA, HAZOP, LOPA, FMEA, QRA, etc.), and Root Cause Analysis (RCA).

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Production Engineer | HSE | Chemical Industry | Up to $5k | Jurong Island

• Work Location: Jurong Island (Company transport provided near Jurong East MRT)
• Work hours: 8 am to 4.30 pm (Mon-Fri)
• Salary range: $4000 - $5000 + $200 (site allowance)

Responsibilities:

The Production Engineer (HSE) is responsible for Daily Operations and Projects Safety, the Lead to reviewed, improvement and compliance to all Safety regulations and requirement. Manage the Operations Risk Assessment and ensure occupational Safety

• Lead daily operation as an HSE Production Engineer to ensure Safety in both daily operation and construction projects at site.
• Lead HSE aspect of operation in risk assessment, Hazop study for new modification projects, changes to operating procedures, site construction activities.
• Review and make list of high-risk activities in the process operation based on Hazop study, have regular meeting with production manager and make plan to improve safety level in such areas of operation.
• Coordinate closely with day production & logistics members for HSE aspect of process operation and ensure safe work procedures are followed.
• Study and review all the safety observation feedback and prioritize based on level of risk to follow up through MOC process. Ensure improvement items are followed by keeping records and timeline.
• Work together with project engineers, production members and maintenance coordinator to ensure safety related projects are followed and implemented in a timely manner.
• Review the emergency and disaster prevention procedures to ensure procedures stay relevant to current operation and up to date.
• Lead and enhance any other HSE related improvement projects/activities.
• To perform any other duties or assignments as assigned by superiors.

Requirements:

• Working experience in the chemical industry
• Deep knowledge of Safety legislation and regulations in the chemical industry
• Diploma / Degree in Engineering, health, safety, or environmental field of study

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Work Location: Jurong Island (Company transport provided near Jurong East MRT)

Work hours: Mon to Fri, 8 am to 4.30 pm

Salary range: Basic $4000 - $5000 + $200 (site allowance)

To coordinate Maintenance Activities between Production and Technical department. Support GCM/SDM MA & MO activities. Support work permit and authorization activities.

Responsibilities:

• Participate in Daily operation and maintenance meetings to support both operation and maintenance activities by keeping status updated with plan.
• Coordinates all maintenance activities including safe permit issuance, lockout-tagout preparation, GSAP approval, and supporting relevant parties to effectively complete the maintenance works as needed.
• Actively prepare equipment from maintenance phase to commissioning of equipment to ensure the completed jobs function well.
• Supports Capital Project/MOC activities in view of blanking, isolation, LOTO and flushing plans are followed to ensure safe handling
• Work closely with the Maintenance engineers on Transition and Turn Around activities from planning stage to commissioning stage.
• Prepare markup PIDs covering all the GCM activities to be completed during the transition period for safe and timely start-up.
• Coordinate with shift team supervisors to ensure maintenance jobs such as cleaning, washing and technical or in-house contractors follow up jobs are completed before handing over to production.
• Support work permitting and work authorization activities.
• To perform any other duties or assignments as assigned by superiors.

Requirements:

• Related working experience in the chemical industry.
• Diploma/Degree in relevant field.
• Minimum 2-3 years of experience in maintenance planning and coordination.

Low Jia Yi R22104302

The Supreme HR Advisory Pte Ltd 14C7279

- To assist lead carpenter plans and lay out work from blueprints, drawings, models etc using variety carpenter''s hand tools

- To perform site visits to evaluate site condition and take measurement

- Able to understand construction drawings, assess and order material

- excellent understanding of carpentry methology and able to hands-on fabrication / installation

- able to communicate with IDs and Project team

- Able to work as a team

- Repair and perform furniture repair

- Minimum 1 year experience

We are seeking an experienced and dedicated Production Supervisor to oversee and coordinate the daily operations of our chocolate manufacturing process. The ideal candidate will ensure that production runs smoothly, efficiently, and safely while maintaining the highest standards of quality.

Key Responsibilities:

• Production Oversight: Supervise and coordinate the activities of the production team to ensure efficient and timely production of chocolate products.
• Quality Control: Monitor and ensure that all products meet the company's quality standards and comply with regulatory requirements.
• Team Management: Train, mentor, and manage production staff, including scheduling shifts, assigning tasks, and evaluating performance.
• Process Improvement: Identify and implement process improvements to increase productivity and reduce waste.
• Safety Compliance: Ensure that all safety protocols are followed and maintain a safe working environment for all employees.
• Inventory Management: Oversee the inventory of raw materials and finished products, ensuring accurate record-keeping and timely reordering.
• Equipment Maintenance: Ensure that all production equipment is properly maintained and promptly address any malfunctions or repairs needed.
• Reporting: Maintain detailed records of production metrics, including output, waste, and downtime, and report these to the Production Manager.
• Collaboration: Work closely with other departments such as Quality Assurance, Maintenance, and Supply Chain to ensure seamless operations.

Qualifications:

• Education: Bachelor’s degree in Food Science, Engineering, Business Management, or a related field is preferred.
• Experience: Minimum of 3-5 years of experience in a supervisory role within a food manufacturing environment, preferably in chocolate or confectionery production.

Skills:

• Strong leadership and team management skills.
• Excellent problem-solving and decision-making abilities.
• Proficiency in production management software and tools.
• Good understanding of food safety and quality standards (e.g., HACCP, GMP).
• Strong communication skills, both written and verbal.
• Ability to work in a fast-paced environment and handle multiple tasks simultaneously.
• Physical Requirements: Ability to stand for long periods, lift up to 50 pounds, and work in various temperature conditions.

Responsibilities:

Conduct forecasting and planning of materials to ensure smooth production process
Schedule and plan production activities based on job orders
Monitor the lead time of producing the finished product
Update and check inventory physical stock and arrange production of finished goods to meet the sales order
Ensure production schedule meet the delivery date
Liaise with suppliers for powder coating
Troubleshoot discrepancies and quality issues

Requiements:

Experience in aluminium working sector and manufacturing
Able to lead team members on production and installation
Have experience in working machineries
Able to read technical and installation drawings
Ensure products and install quality
Planning of production schedules and allocate sufficient Manpower
Implementation production processes and maximize efficiency and reduce production waste
Implementing continuous process improvements
Preparing material and equipment lists, PO, cost analyses and estimated cost
Provide training staff for new production teams
Working hours & days: 6 days work per week 8:30am to 5:30pm
Working location - Ubi

Our client is transforming the cleaning industry with advanced robotic solutions that tackle manpower challenges. Their innovative robots are already making a difference in 30 countries! As they continue to grow, they are seeking a Production Engineer to join their team.

Key Responsibilities:

• Design, implement, and optimize manufacturing processes to enhance efficiency and product quality.
• Troubleshoot and resolve production issues, identifying root causes and implementing corrective actions.
• Ensure production processes comply with quality standards and regulatory requirements.
• Drive continuous process improvements using Lean, Six Sigma, or other methodologies.
• Collaborate with cross-functional teams to meet production goals and improve operational performance.
• Develop and maintain standard operating procedures (SOPs), work instructions, and project documentation.
• Perform data analysis and reporting, including FMEA, testing reports, and BOM management.
• Support the introduction of new products or production techniques, ensuring smooth transitions.

Requirements:

• Bachelors degree in Mechanical, Industrial, Manufacturing Engineering, or a related field.
• 2-5 years of experience in a manufacturing or production environment.
• Comprehensive understanding of manufacturing processes, techniques, and materials.
• Proficiency in CAD software and familiarity with ERP and MES systems.
• Excellent technical writing skills (SOPs, work instructions, FMEA, testing reports, project documentation).
• Strong problem-solving abilities and experience with Lean, Six Sigma, or similar continuous improvement methodologies.
• Strong communication and teamwork skills.
• Ability to manage multiple projects and meet deadlines effectively.

Interested candidates are invited to send in your Resume in MS Word Format stating your past work experience, reasons for each leave, past and expected remuneration.

We regret to inform that only shortlisted candidates will be notified.

By submitting an application to us, you will be deemed to have agreed for us to collect, use, and disclose your personal data which you have submitted to your prospective employers, for the purpose of job search, and/or other services which you have consented us to perform on your behalf.

Attn: Woo Gu Ming (R24123795)

Cultivar Asia Pte Ltd (MOM EA License: 19C8782)

The incumbent will be responsible for managing the continuous safe and reliable production operations of the terminal, including the berthing and unloading/reloading of ships and running the plant to reliably deliver gas to the downstream pipelines to meet the nominations of our customers.

The incumbent shall be responsible for, but not limited to, the following scope of tasks and duties:

• Lead Supervisors and Technicians in the Production Team to safely and reliably operate the terminal facilities.
• Work with Maintenance Manager and Technical Services Manager to ensure maintenance and shutdown activities are safe, planned, and executed in a timely fashion with minimum production capability.
• Optimise plant operations from the throughput, use of energy and minimisation of losses perspectives based on experience and with engineering team support.
• Establish and approve shift rosters and relief schedules for Production Team, authorise Hot, Cold, Confined Space and Vessel Entry Permits-to-Work and issue daily instructions on deployment of online plant, process conditions and shutdown and maintenance activities.
• Develop, review and establish Standard Operating Procedures for production processes.
• Provide leadership for emergency responses and make command decisions to prevent emergency incidents from escalating and affecting safety of employees, contractors or the community or the integrity and safety of the Terminal.
• Ensure the training of Production Team including on the job training is completed for commissioning phase.

Requirements

• Degree in Engineering.
• At least 10 years’ experience in similar roles at liquefaction facility or 15 years’ experience in complex hydrocarbon processing or oil refinery, preferably with exposure to cryogenic processes (e.g. ethylene, LPG, ammonia, air separation).
• Subject matter expert in the operation and good understanding of the maintenance of equipment such as cryogenic heat exchangers, refrigerated storage tanks, cryogenic pumps, large reciprocating gas compressors, reciprocating engine driven generators & gas turbine drivers, electrical switchgear up to 66kV, process control systems, field instrumentation, fire & gas systems, shutdown systems, security systems, gas metering and gas chromatographs.
• General knowledge of the operations and maintenance of related equipment such as centrifugal pumps, tanks, valves, ship unloading arms, hydraulic systems, fire protection systems, diesel engines, centrifugal and reciprocating compressors, ship mooring systems, seawater intake screens, cranes and lifting devices.
• Proficient in the Permit to Work Systems, equipment preparation for maintenance, gas testing and emergency response and high proficiency in DCS and CMMS applications.
• Extensive experience with management of change process and administering daily work instructions; permit to work systems, safe preparation for maintenance, troubleshooting and shutdown planning and execution.
• Conversant with the safe control of ship berthing, use of loading arms and Simultaneous Operations.
• Familiar with quality management, risk based inspection, preventive maintenance systems and concepts in management of spare parts and consumables.
• Working knowledge of environmental concerns and regulations.
• Excellent leadership skills with proven capability in staff development with adaptability to work in multinational and multicultural environment. Highly adaptable with experience working in a multinational and multicultural environment.

Our client is a global manufacturer. Due to business needs, they are now recruiting a FP&A Accountant to be part of their FP&A team for ongoing transformation projects. They are located in the North Area - easily accessible.

Responsibility:

• Coordinate the preparation, compilation, and analysis of the Annual Budget prior to its submission to the corporate office.
• Analyze financial variances and take a proactive approach by conducting meetings with operations departments to review and discuss monthly forecast performance.
• Synthesize complex data from various sources and transform it into comprehensive management reports.
• Scrutinize a wide range of records and engage with various departments to ensure data accuracy and reliability.
• Oversee SOX compliance and address internal and external audit queries.
• Enhance processes and actively participate in ad-hoc LEAN projects.

Requirements:

• Min Degree in Finance / Accountancy or any related field
• Minimum 5 years experience in FP&A and SOX
• Experience in manufacturing industry is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Our client is a Manufacturing MNC. Due to business needs, they are now recruiting a Sales Coordinator to be part of their Sales Team for ongoing transformation projects. They are located in the West - easily accessible.

Duties of Sales Coordinator:

• Accurately process sales orders in the system, ensuring correct product details, pricing, and customer information.
• Prepare and maintain sales documents, including quotations, invoices, contracts, and sales reports.
• Assist the sales team in preparing presentations, proposals, and any other necessary documents.

Requirements:

• Relevant experience
• Experience with SAP or ERP System

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Rapsodo Inc. is a sports analytics company that uses computer vision and machine learning to help all athletes maximize their performance. Our proprietary technology applications range from helping PGA Tour golfers optimize their launch conditions to allowing MLB pitchers to increase the efficiency of their breaking balls. Current partners include all 30 MLB teams, MLB, USA Baseball, Golf Digest, PGA of America, and over 1000 NCAA athletic departments. 

New Product Introduction (NPI) is the end-to-end process of bringing a new product to the market from design concept to the end customer. It broadly encompasses the following stages of the engineering team: Lab Prototypes (LP), Production Prototypes (PP) & Production Ramp (PR). 

As an NPI Engineering Intern at Rapsodo, you will be exposed to the different stages of NPI for Rapsodo’s upcoming products to be released. You will also be exposed to the manufacturing environment of how our products are built and supported by our Research & Development (R&D) Team.

Roles & Responsibilities

• Gain invaluable exposure into Singapore’s Technology Sector 

• Be exposed to the different stages of the NPI process for Rapsodo’s upcoming products 

• Assist with building prototypes

• Provide feedback for the prototypes you build 

• Be involved in investigative study with our R&D Team 

• Be exposed to working with our Software Test Team, Purchasing Team as well as Manufacturing Team

• Pursuing Diploma in Electrical, Mechanical Engineering or any related Engineering discipline 

• Responsible, hardworking and a team player • Good attitude to learn and contribute to the team 

• Pro-active, organized & meticulous and able to work independently in a fast-paced environment 

• Have strong analytical, problem solving and inter-personal skills 

• Excellent written and oral communication skills with the ability to present ideas and results to technical and non-technical audiences

Our client is a Manufacturing MNC. Due to business needs, they are now recruiting a to be part of their Procurement Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of Buyer:

• Analyze sales and purchasing data to identify market trends and support decision-making.
• Conduct cost analysis to assess total costs and identify cost-saving opportunities.
• Source and evaluate suppliers, contractors, and value-added services for projects.
• Collaborate with sales and customer service to manage subcontractors and place orders.
• Maintain material master data, including creating part numbers and Bill of Materials (BoM) items.
• Negotiate pricing and terms with suppliers to secure optimal deals.
• Monitor and adjust order schedules to meet delivery requirements.
• Address product quality issues, short-shipment claims, and replacements with suppliers.
• Plan and propose buffer stocks to meet project demands and ensure supply consistency.
• Perform demand planning and forecasting for projects and recurring business.
• Identify and implement process improvements within procurement operations.
• Handle other duties as assigned.

Requirements:

• Diploma in related field
• Relevant experience
• Well versed with SAP

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals

Role Description:

VS1

This position reports to the Production Superintendent and is an integral member of Production Shift Team. GSK is committed to an employee-orientated, high performance culture that emphasises process automation, quality compliance and continuous improvement.

Trainee to be involved in:

• To execute key process operations in accordance to established batch instructions and schedule to make APIs and intermediates as well as plant changeover
• To learn Process and Workplace Safety and cGMP knowledge for manufacturing and to demonstrate understanding during execution
• To identify opportunity for improvements and able to carry out short term improvement projects to achieve benefit
• Inspects and maintains house-keeping of his assigned area for clean and safe working conditions as well as ensuring that personal protection equipment and safety equipment are maintained ready for use.
• Perform plant trouble shooting using appropriate problem- solving tool to minimize plant stoppages and safety or quality incidents.

VS2

This position reports to the Shift Operations Superintendent and is an integral member of Operations Team. GSK is committed to an employee-orientated, high performance culture that emphasises process automation, quality compliance and continuous improvement.

Trainee will be trained to operate all API manufacturing related equipment and facilities in his assigned area in compliance with GMP and EHS requirements. Trainee to adhere to strict recording and filling of batch / manufacturing records, process safety and general housekeeping of all work areas. To provide practical processing inputs to identify opportunities for process improvement.

Trainee to be involved in:

• Involve in hands-on execution of the plant operations and assist in trouble-shooting
• Monitor and analyze processing parameters for atypical trends and improvement opportunities
• Perform raw material dispensing and equipment configuration with additional logistical support responsibility
• Prior experience with analytical instrument will be a plus point
• Actively support continuous improvement initiative
• Support quality or safety related investigation using appropriate problem-solving tool to determine the root causes and implement CAPA to prevent recurrence.
• Support Quality & Safety audits
• Adhere to any applicable EHS requirements
• Ability to adhere to regulatory requirements, written procedures and safety guidelines
• Ability to evaluate documentation/data according to company and regulatory guidelines
• Ability to interact with inspectors (internal and external)
• Ability to interpret and apply Good Manufacturing Practice (GMP) knowledge
• Basic mathematical skills
• Ability to organize work and handle multiple priorities and meet deadlines
• Ability to understand, apply and evaluate basic chemistry and physical principles

We are looking for you with below attributes:

VS1

• ITE/ Diploma in Chemical Process/ Technology/ Engineering related

VS2

• NTC/ITC/Diploma/Degree in Science or Engineering

What you will learn:

VS1

• Foundational on-the-job training experience working in cGMP and key Global Supply API manufacturing site with state of art manufacturing facilities, including first in class Continuous Manufacturing facility
• To train to be an advocate for Continuous Improvement, with introductory basics on Lean Sigma concepts and coaching by supervisors to complete practical application through completion of improvement project

VS2

• Demonstrate commitment to cGMP, EHS compliance aspects of pharmaceutical plant operation
• Excellent self-motivated team player with hands-on attitude and good communication skills
• Ability to understand, apply and evaluate basic chemistry and physical principles
• Ability and willingness to work on 12-hour shift operations

This will be a 12-hours shift work.

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Jurong.

How can I apply?

Applications are now open, please apply via this link: https://gsk.wd5.myworkdayjobs.com/GSKCareers/job/Singapore---Jurong/TnP-Trainee---Operations-Technician_379975-1

We recommend you apply as soon as possible, because we accept ongoing applications and offer positions on a first come, first served basis!

At GSK we value diversity and treat all candidates equally. We strive to make our recruitment process free of bias of any kind and aim to create an inclusive workplace at GSK. If you require any assistance, either to attend an interview or during the course of the recruitment process, please let us know

Our client is a leading player in Manufacturing industry. Due to business needs, they are now recruiting a Logistics Coordinator to be part of their Logistics Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of Logistics Coordinator:

• Ensure accurate and timely documentation for all incoming and outgoing shipments.
• Update and maintain material movement records in the system and ensure inventory accuracy.
• Collaborate with warehouse and internal departments to align on requirements and priorities.
• Perform timely transactions in the SAP system and archive all related documents.
• Manage the purchase of indirect materials and generate weekly/monthly stock count sheets.
• Liaise with freight forwarders, arrange local deliveries, and handle RMA documentation.
• Maintain departmental safety and cleanliness standards.
• Contribute to process improvement initiatives and perform additional duties as assigned by the Logistics Manager.

Requirements:

• Relevant logistics experience

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a precision engineering manufacturer with strong presence in APAC region. Due to business needs, they are now recruiting a Cost Analyst to be part of their FP&A team for ongoing transformation projects. They are located in the North Area - easily accessible.

Responsibility Cost Analyst:

• Analyze product costs, including materials, labor, and overhead, to ensure accurate cost structures.
• Conduct variance analysis and improve cost allocation accuracy using the ERP system.
• Develop and maintain standardized costing methodologies across all sites.
• Collaborate with production, procurement, and sales teams to gather data for cost analysis.
• Support FP&A activities, including budgeting, forecasting, and pricing strategies.
• Prepare cost reports and provide insights to guide decision-making and profitability.
• Identify cost-saving opportunities and improve costing processes.
• Ensure compliance with accounting standards and assist with audits related to product costs.

Requirements:

• Min Degree in Finance / Accountancy or any related field
• Minimum 3 - 5 years analysis experience in product costing from manufacturing or similar setting

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

5 days work week , 2 shift rotating by week

7am - 3pm

3pm - 11pm

Job Summary

Lab Executive independently performs advanced level laboratory functions with competence and minimal supervision. Support the Technology Department through all stages of product development and testing.

Reporting: Senior Laboratory Executive

Role and Responsibilities

1. Ensure all Lab Job Ticket assigned are performed accordingly and completed on time.

2. Independently and competently performs assigned tasks in a prioritized, logical, and timely manner in agreement with company laboratory and safety procedures with competence and minimum supervision

3. Tests in accordance with specifications provided.

4. Perform all core function/testing required by this position.

5. Assists in reviewing & writing of SOPs and standard test methods.

6. Enter test data and conditions into the lab system and can assemble into a simple report.

7. Capable of conducting internal R&R.

8. Troubleshoot lab equipment issues with assistance from M&E/ equipment vendor.

9. Prepare testing report

Job Requirements:

• Diploma in Chemical Engineering / Chemical Process Technology

• 3 year of related work experiences.

• Work experience in Manufacturing environment will be preferred

• Good understanding of manufacturing safety and 5S

Responsibilities

• Investigate production issues, respond based on production defect severity SLAs.
• Manage and respond to users on timely manner.
• Log incident ticket for production issues and user queries
• Follow up on defect and incident closure and meet incident closure KPI.
• Make sure system availability as per respective agreed SLA.
• Ensure daily start of day (SOD) and end of day (EOD) execution for supported applications complete successfully.
• Provide support for annual Disaster Recovery (DR) exercise for supported applications.
• Provide support to System Engineers on server level patches / upgrade as and when applicable.
• Knowledge with 3rd party monitoring tools like Control-M, Geneos, Splunk, SQL Monitor
• Knowledge with Market Data, and Genos monitoring setup and dashboard configuration
• Ensure application incident & task documentation is properly updated for each production release.
• Enthusiastic, hardworking, proactive and goal-oriented, with excellent communication and presentation skills, demonstrated professionalism and attention to detail.
• Proven ability to work and resolve production incidents under strict time constraints and provide workarounds using AS400/mainframe or Unix shell or DB scripts etc.
• Strong skills in AS400, Linux/Unix Shell scripting, MS SQL, Oracle, BMC Control-M Scheduler
• Good to have understanding and experience of ITIL methodology [service operation]

Requirements

• At least 3-5 years’ relevant experience preferably in a Application Support.
• Prior hand-on production support experience of OPEN Systems/AS4000
• Good support knowledge in either one of the retail or wholesale payment or customer information systems
• Willing to work in onsite shift-support model [24*7]
• Hands-on experience in writing AS400 and SQL queries and parsing logs for issue investigation
• Hands-on experience in writing shell scripts (UNIX) and optimize incidents investigation.
• Strong written, oral communication skills and able to manage user.
• Ability to easily adopt to any technology / environment.
• 2 or more years production support experience in bank or financial vendors across multiple technologies / platform
• Be able to work in fast pace and high-pressure working environment.
• Willingness to work across platforms – UNIX / SQL, AS/400 and Mainframe

Key Domain: UNIX / SQL, AS/400, Mainframe

“This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to A-IT Software Services Pte Ltd’s PDPA and e2i PDPA.

As Business Development Manager for Production Workflow, APAC, you will be charged with building Ross’ growing presence across the Asia Pacific region with responsibility for the exciting range of newsroom, automated production control, ingest, playout, MAM, legislative production and storage solutions we offer.

This role will be closely integrated with the global production workflow team, local sales teams, partner network, marketing and others. It is a highly independent role, and candidates will have a large amount of input into strategy both in terms of pipeline growth and product development. They will have responsibility for supporting the greater team’s annual sales targets, as well as specific goals related to regional pipeline growth and win rate.

The role will require significant travel in the region and occasionally globally, visiting customers, partners, attending tradeshows and summits as well as occasional internal meetings.

What we offer

Ross offers competitive salaries and comprehensive health plans, as well as several perks to help you perform at your best.

Some of these perks include flexible hours, generous paid time off, fitness/wellness allowance, employee share ownership program, development support and a ton of fun social activities and events!

Best of all, you will be part of the Ross Video family, and we’ve got a pretty energizing environment here.

RESPONSIBILITIES

Business Development Manager

• Increase pipeline for production workflow products in the APAC region.Maintain relationships with key
• customers and partners and become a trusted advisor while keeping closely coordinated with the local sales team.
• Be a conduit for Ross’ production workflow messaging into the region, and a conduit for the region’s requirements back into product management.
• Translate business requirements into local strategy.
• Maintain a deep understanding of Ross video production workflow solutions and a solid understanding of all other Ross solutions.
• Remain in sync with the global production workflow business development team to increase efficiency and effectively implement global strategy.
• Act as a filter to qualify and disqualify opportunities
• Assist and occasionally lead in the response to RFIs, RFPs etc.
• Build sales support materials including guides, one-sheets, demo videos and more.
• Localize content generated in other regions for local use
• Provide expert technical guidance and support during the pre-sales process, including product demonstrations and proof-of-concept implementations.
• Work closely with the solutions teams to analyze client requirements and translate them into detailed technical specifications and solution designs

You should have experience with:

• Selling or supporting sales of technical solutions
• Live broadcast production techniques and workflows
• Newsroom workflows
• ngest and Playout solutions and workflows
• Control room operations
• Production automation
• Non-linear production workflow
• Media storage
• Network architectures for media production environment
• Cloud architectures
• You are a clear and confident public speaker
• Experience growing sales channels
• Proficient in Microsoft Word/Excel/PowerPoint/Visio
• Excellent English communication skills – written & verbal
• Fluent in at least one other language relevant to the territory.
• Able to take complex technical details and convey the information to others in an easy-to-understand manner
• Salesforce
• Able to work effectively remotely

Bonus points if you have the following:

• An existing network of contacts within the broadcast landscape in APAC.
• Experience selling or operating live replay environments.
• Experience selling into the government, corporate, or education verticals.
• Additional working languages.
• Marketing or direct sales experience.
• An understanding of software development processes.

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

The NPI / Production Process Engineer is required to collaborate with the Program Management Team

and be involved in New Product Introduction activities and the creation of manufacturing Work

Instructions as well as other process documents. The incumbent is also expected to improve the work

processes actively and continuously to achieve high productivity and quality.

Key Responsibilities:

 Early involvement in NPI (New Product Introduction) activities.

 Interpret technical information (documents, drawings, and data) and analyse the manufacturing

process elements.

 Create Bill of Materials structure.

 Create manufacturing Work Instructions and other process documents in collaboration with the

Program Management, Production and Quality Assurance Teams.

 Carry out time studies and update the process cycle times.

 Provide timely technical support to the Production Team pertaining to manufacturing process and

quality issues.

 Engage in DFM and Lean Line Design activities.

 Relentlessly explore, evaluate, and review new tools, equipment, processes, etc.

 Actively and continuously improve the work processes to improve work efficiency and quality.

 Work with Program Management, Production, and Quality Assurance Teams to identify potential

process risks and make recommendations to mitigate these risks.

 Any other ad-hoc tasks as assigned by the Manager and/or Engineering Lead.

Skills & Qualification:

 Minimum Diploma in any Engineering field such as Electrical, Mechanical/Mechatronics,

Manufacturing/Production or industrial Engineering

 Min. 3 years of manufacturing process engineering experience, preferably dealing with wire or cable

harness. Candidates with less experience may be considered for the Asst. Engineer position

 Ability to read and interpret technical documents and drawings

 Basic manufacturing knowledge in cable harness assemblies, plastics and sheet metal preferred

 Experienced in the creation Bill of Materials structures

 Good knowledge on Solid Edge or SolidWorks preferred.

 Proficient with Microsoft Outlook, Excel, Word and PowerPoint

 Lean/Six Sigma certification is desirable

 Strong analytical ability

 Team player with good communication skills

Job Description

• Industry/ Organization Type: Food Manufacturing
• Position Title: Production Operator
• Working Location: Woodlands (Nearest MRT: Admiralty)
• Working Hours: Monday to Saturday, 8.30 am – 5.30 pm (Exceed 44 hours will be considered as OT) [Sometimes alternate Saturday]
• Salary Package: Up to $1,500 + Meal Allowance $50 + OT + Monthly incentive + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• To perform and fulfill daily production planning capacity as per Team Leader’s instruction.
• To observe and practice strictly the plant sanitation and cleaning procedures at all times.
• To keep the factory in good, clean and hygienic condition.
• Any other work as assigned by the Management from time to time.

APPLY NOW!!!

• At least 1 year of related working experience
• Able to commit OT as and when needed
• No allergy to smell of seasoning
• Physically fit – able to carry up to 25KG

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66225 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Chemical Manufacturing
• Position Title: Leader (Production) / Assistant Production Manager
• Working Location: Tuas
• Working Hours: Monday to Friday (8.15 AM – 5 PM / 9.15 AM – 6 PM)
• Salary Package: Basic Salary up to $5,500 + AWS + Bonus + Flexible Benefits
• Duration: Permanent

Key Responsibilities

• Daily supervision of plant machinery and systems across all facilities, ensuring they are operational and well-maintained for effective production.
• Collaborate with the Maintenance and Technology departments to solve any issues with production quality, processes, or equipment.
• Educate and guide Senior Supervisors on maintaining the plant's working condition, focusing on safety, quality, and minimizing waste.
• Track and manage the use of raw materials and production to maximize efficiency and reduce excess use.
• Create detailed operating instructions for staff for each shift that covers starting, stopping, and any operational changes needed for tests, projects, or maintenance.
• Be informed about our management systems and relevant certifications like ISO and ITAF, perform corrective measures if necessary, and ensure department adherence.
• Direct studies and test new products and materials, conducting analyses that lead to process improvements.
• Support other departments with any extra tasks as needed.

APPLY NOW!!!

• Possess a Diploma/Degree in a relevant discipline
• At least 2 years of hands-on experience in a production/manufacturing environment
• Proven leadership and/or supervisory experience
• Effectively communicate information with courtesy and clarity to employees of the organization and occasionally, customers or clients

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66185 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Chemical Manufacturing
• Position Title: Production Head / Production Manager
• Working Location: Tuas
• Working Hours: Monday to Friday (8.15 AM – 5 PM / 9.15 AM – 6 PM)
• Salary Package: Basic Salary up to $6,500 + AWS + Bonus + Flexible Benefits
• Duration: Permanent

Key Responsibilities

• Oversee the safety, quality, and environmental and energy aspects of the production plant, managing and organizing production processes to ensure they operate efficiently.
• Ensure the department meets the standards required for management system certifications such as ISO 9001, 14001, 45001, 50001, IATF 16949, etc.
• Prepare and update essential documentation, including Production Work Instructions, forms, Quality and Environmental Impact Assessments, and Risk Assessments.
• Assess training needs annually or as needed to ensure production staff are properly skilled.
• Address any issues promptly that arise from customer feedback, audits, or other stakeholder concerns.
• Review materials and processes regularly to seek improvements.
• Analyze production capacity and maintain detailed process records.
• Track and manage resources to cut costs and reduce waste of materials and energy.
• Step in to handle various tasks as needed to support other departments.
• Take part in interviewing and evaluating the performance of department staff.

APPLY NOW!!!

• Possess a Diploma/Degree in a relevant discipline
• At least 3 years of managerial experience in a production/manufacturing environment
• Proven leadership and/or supervisory experience
• Effectively communicate information with courtesy and clarity to employees of the organization and occasionally, customers or clients.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66186 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Must-Have

(Ideally should not be more than 3-5)

• Strong Mainframe experience • Must have strong skills and exposure in JCL, COBOL, DB2, VSAM and JCL.

• Experience in OPC scheduler and Batch support.

Good-to-Have

• Experience in Bank/Cards and Wealth Domain

• Good to have exposure and experience in CICS

• Vision Plus experience (optional)

• Good exposure and experience in Retail/Personal Banking environment

• Experience in driving COB, Data center migrations, risk identifications, Etc

Job Description:

• Support the planning, management and operations of multiple projects, not limited to events, exhibitions and installations.
• Work closely and cohesively with the Account Servicing team to ensure concepts and proposals approved by clients are turned into reality.
• Liaise and negotiate with stakeholders (not limited to suppliers and contractors) for quotations, and assist in the procurement process.
• Conduct site inspections and measurements.
• Apply for all relevant licenses and permits required with relevant authorities.
• Prepare pre-event planning documents and coordinate with all stakeholders (not limited to suppliers, contractors and venue owners) to facilitate a smooth pre-event setup.
• Provide on-site operational support and manpower management.
• Support and manage event setup to facilitate the delivery of a high quality event.
• Conduct pre-event and on-site quality control on all event production matters and deliverables by relevant stakeholders.
• Manage the transportation and delivery of all equipment and event assets, including the proper accounting of such items.
• Manage and coordinate post-event teardown matters, including the reinstatement/return of venue to its original state.
• Manage event operations and production budgets.
• Plan and source for the necessary resources to support the pre-event planning, on-site event execution and coordination to support the delivery of a successful event.

Requirements:

• Candidate must be a team player and possesses the ability to work independently with minimal supervision.
• Candidate must possess a keen interest in event operations and production (not limited to Audio-Visual, props fabrication and IT).
• Candidate must be a good negotiator and is able to articulate ideas effectively
• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree in Event Management, or equivalent
• Candidate should have a good command of English Language (written & spoken)
• Required skill(s): Google Suite / MS Excel / Word / Powerpoint
• Knowledge in Adobe Photoshop/Illustrator or AutoCad would be an advantage
• Prior experience (including part-time) in Event operations and productions would be a plus for this position
• Fresh graduates are welcome to apply.
• Full-Time position(s) available

• Provide administrative support to the Senior Production Executive and overall department to ensure smooth running of the operation
• Provide training and guidance for Production Assistants
• Data entry of daily production input and output including volume produced, new material consumed, material and products on-hold/defect
• Compile information such as production rates and progress, material inventory, material used and customers' information so that status report can be completed
• Assist Manufacturing Engineer and Production Supervisor in updating production charts, checklists and data
• Assist in preparing production reports and perform simple analysis on reports
• Maintain and update departmental overtime records
• Ensure proper documentation procedures are adhered to and conform to ISO standards and requirements
• Help to coordinate stock take process