About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You are responsible for identifying, assessing and advising on risks arising from the workplace health, environmental and/or work processes, recommending measures to eliminate or minimize and control the risks and implementing the measures.

Key Responsibilities

• Conduct job and environment hazard and risk assessments, perform workplace evaluations, and implement corrective and preventive actions
• Apply relevant licenses, conduct tests and provide necessary inspection reports on environment and safety to drive improvement
• Lead and continually review existing and new Fab processes and equipment for EHS compliance, including managing waste, air, water, chemicals, gas and others
• Manage semiconductor process safety, establish Environment, Health and Safety (EHS) culture, implement and enhance the EHS program for employees and contractors
• Perform regular and ad-hoc inspections. audits and supervise hazardous operations safely
• Lead and facilitate ERC (Emergency Response Committee) related activities such as factory emergency response, fire, gas leak and others
• Collaborate with relevant departments for ISO14001, ISO45001, ISO14064, and ISO50001 management systems certification and compliance
• Provide technical, regulatory and process guidance to address emerging EHS issues

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Engineering or Science background including Occupational Safety, Chemical Engineering or Chemistry, environmental science and emergency response or management
• Minimum of 3 years of experience in semiconductor, electronics manufacturing, or other chemically intensive manufacturing industries and regulatory compliance preferred.
• Possess industrial safety, environmental protection, and fire protection related certificates
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months

Key Skills and Attributes

• Strong analytical skills and able to work under pressure in a fast-paced environment
• Good interpersonal, leadership and communication skills to work effectively across functions and geographical teams with diverse background
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Equipment Engineer to be part of our Diffusion Department diverse team of talent.

Responsibilities:

• Responsible for daily operations in the Diffusion CMP Equipment Module.
• Perform corrective & preventive maintenance on equipment to maintain good quality & productivity performance.
• Provide 24×7 support for troubleshooting equipment & problem solving in Factory operations floor.
• Maintain documentations for equipment installation, maintenance and troubleshooting procedures for reference purposes.
• Develop continuous improvement to enhance equipment reliability and cost of ownership.
• Drive innovation in factory automation, processes and systems to improve productivity.
• Coordinate, supervise & develop a team of high performance equipment engineers.

Requirements:

• Degree in Chemical/Electrical & Electronics/Materials/Mechanical/Microelectronics/Physics or equivalent
• Familiar with Mirra polishing tools and DNS Scrubber
• Highly motivated & strong team player
• Possesses good communication and interpersonal skills
• Quality 1st mindset & strong analytical, problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You will be responsible to oversee the development, operation and management of the chemical analysis lab, ensuring precision and compliance with industry standards while optimizing analytical methodologies and supervising staff.

Key Responsibilities:

• Create and manage the operation system for the chemical laboratory to ensure compliance with industry

standards and quality requirements.

• Develop and implement advanced analytical methods to meet the fab’s monitoring and analysis needs.

• Optimize processes to enhance the precision and efficiency of chemical analyses.

• Ensure the calibration, validation, and maintenance of laboratory equipment to uphold accuracy and reliability in results.

• Conduct micro-contamination monitoring activities to detect and mitigate issues effectively.

• Provide guidance and supervision to laboratory staff, establishing and achieving annual performance goals.

Education Qualification & Essential Experiences:

• Bachelor’s degree or higher in Electronics, Electrical Engineering, Physics, or a related technical field.
• Minimum of 3 years of relevant experience in semiconductor Chemical Analyst engineering.
• Strong problem-solving skills and a detail-oriented approach with the ability to analyse complex data and derive insights.

Personal Attributes:

• Excellent coordination and communication skills, with the ability to work independently and manage multiple tasks effectively in a fast-paced environment.
• Able to be reliable and accountable in all tasks and responsibilities.
• Have the drive to achieve goals and complete tasks independently.
• Proficient in effectively conveying information through both written and verbal communication.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.es.

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You will be responsible for managing the logistics of import and export shipments, working efficiently in a fast-paced environment and handling logistics documentation and related tasks.

Key Responsibilities:

• applying for all relevant import/export licenses and ensuring compliance with local and international regulations, including customs and trade compliance standards, is also a crucial part of the role, particularly regarding import and export activities.
• preparing and managing all shipping-related documentation, including invoices, bills of lading, and other essential paperwork to ensure that all shipping documents are complete, accurate, and in compliance with industry regulations and company standards.
• overseeing payment and billing processes, ensuring the accuracy of invoicing and all financial transactions related to shipping and logistics operations.
• organizing and maintaining a well-structured document control system, ensuring all shipping related documents are easily accessible, updated, and compliant with relevant standards and company policies,
• coordinating shipping schedules and transportation arrangements with suppliers, customers, and service providers to ensure timely deliveries.
• monitoring shipments to track their progress, ensuring that they arrive on time, and will proactively resolve any issues such as delays or discrepancies by communicating with relevant parties.

Education Qualification & Essential Experiences:

• Bachelor’s degree in supply chain management or STEM related fields.
• Minimum 2 years & above of working experience in handling import & export shipping documents / procurement process.
• Experience in procurement process within the semiconductor industry is a plus.
• Proficient in Microsoft Office (Excel, Word, Outlook & Power Point)

Key Competencies:

• Proficient in analytical thinking and problem-solving
• Strong negotiation and relationship-building skills
• Performs well under pressure.
• Result-driven and adaptable to fast-paced environments.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You will be responsible in leading a reliability engineering team to execute transfer technology qualification, reliability monitor, process change evaluation, and manage customer-focused reliability requirements.

Key Responsibilities:

• Establish reliability test laboratory and manage the daily operation.
• Implement and optimize reliability test methodologies, ensuring alignment with industry standards and client expectations.
• Conduct qualification specifications for transfer technologies, guiding teams in the development and execution of testing methodologies.
• Manage the execution of reliability qualification processes, ensuring continuous monitoring and timely interventions for corrective actions.
• Apply advanced statistical tools and quality assurance methods to proactively detect and address potential reliability issues.
• Assess reliability risks for customer products, providing strategic guidance to mitigate potential issues.
• Manage worldwide customer reliability specifications and requirements.

Education Qualification & Essential Experiences:

• Bachelor's degree or higher in EE/Physics/Material Science or other related engineering discipline.
• At least 15 years of experience in Integrated Circuit process and Reliability Assurance management.
• Strong knowledge of semiconductor device physics, wafer-level reliability, and statistical quality control methods.
• Experience in risk assessment and developing corrective action plans.

Personal Attributes:

• Strong leadership skills
• Excellent interpersonal, written, and verbal communication abilities.
• Ability to multitask effectively and solve problems efficiently.
• Enthusiastic and able to motivate a team to achieve exceptional results.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.es.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Senior Engineer/Engineer to be part of our Product Engineering diverse team of talent. You will be responsible for yield, quality and reliability issues of devices.

What you will be working on:

• Resolve yield, quality and reliability issues in the qualification of new devices
• Perform pre-tapeout risk assessment and communication with Business line/ Fab on the necessary actions to eliminate/ minimize risk
• Conduct product yield analysis to identify root causes of wafer sort and final test failures
• Work with Customers and Account Managers to maximize die output
• Establish product low yield criteria and dispositioning
• Provide product engineering support to failure analysis lab for electrical fault isolation
• Provide product engineering support to reliability lab to understand and resolve reliability failures
• Compliance to safety, discipline and housekeeping rules
• Support cost reduction through yield improvement and resolving excursion
• Participate in continuous yield and productivity improvement projects

More About You:

• Bachelor's Degree in Engineering (Electrical/Electronic) or equivalent
• 2 years of relevant product engineering experiences in front-end wafer fab environment or
• In depth knowledge of semiconductor device physics, electrical & electronics engineering fundamentals & wafer fabrication processes
• Strong analytical and problem solving skills
• Good communication and interpersonal skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Senior Assistant/ Assistant to be part of our Warehouse diverse team of talent.

What you will be working on:

• Ensure safety in all aspects of work, including carrying heavy loads, binning in, and the use of ladders. Reference to HIRA procedures.
• Maintain excellent 6S housekeeping standards in daily work activities
• Perform SAP transactions for warehouse-related tasks, including packing.
• Support internal and external audits to ensure compliance with all audit requirements.
• Enforce procedures for security wafers management, including security wafer packing.
• Identify and contribute to improvement projects, submitting projects into the SSMC Transform Portal.
• Assist in data analysis and preparation for yearly strategic planning.
• Review and update all operating instructions (OIs) and standard operating procedures (SOPs).

More about you:

• Minimum GCE O Level / ITE / Polytechnic graduate.
• Preferably 1 to 2 years of logistic experience in a warehouse setting.
• Experience in semiconductor warehouse operations is advantageous.
• Demonstrated integrity and proactive work attitude.
• Proficient in SAP system operations.
• Conversant in Chinese for communication with Chinese-speaking associates.
• Accurate work with strong attention to detail.
• Excellent housekeeping skills.
• Forklift license is a plus.

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible and focus on creating an engineering plan for land development based on their calculations and any research conducted. They should have experience with AutoCAD and be able to utilize strong design skills in order to create visual aids. By utilizing strong organizational and communication skills, this candidate will also have the ability to execute a project based on the criteria outlined.

Key Responsibilities

• Take charge of facility CIVIL&MEP package concept design and RFP Preparation for 300mm semi-conductor Fabrication plant.
• Supervise and monitor EPC contractors or design consultants’ design progress.
• On-site management CIVIL&MEP package construction schedule and commissioning.

Education Qualification & Essential Experiences

• Bachelor's degree in Civil Engineering or a related STEM field.
• More than 5 years of construction project management experience, including 300mm semi-conductor Fabrication plant construction experience.
• Good written and verbal communication skills in English
• Good skills of computer software e.x. Microsoft Office, Microsoft Project, AutoCAD etc.
• Candidates with proactive attitude and responsibility good collaboration experiences in construction project.

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Key Responsibilities

• Take charge of facility MEP package concept design and RFP Preparation for 300mm semi-conductor Fabrication plant.
• Supervise and monitor EPC contractors or design consultants’ design progress.
• On-site management MEP package construction schedule and commissioning.

Education Qualification & Essential Experiences

• Bachelor's degree in Mechanical Engineering or related field.
• 300mm fab facility mechanical system operating experience, especially Exhaust / Chiller / PCW & Clean Room Systems.
• Good written and verbal communication skills in English.
• Good skills of computer software e.x. Microsoft Office, Microsoft Project, AutoCAD etc.
• Candidates with proactive attitude and responsibility good collaboration experiences in construction project.

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD) or Physical Vapor Deposition (PVD)

Key Responsibilities

• Maintain smooth daily manufacturing operations and problem solve issues promptly
• Actively collaborate with equipment and material suppliers and partners to identify technology deficiencies; develop, evaluate, and validate corrective and preventive solutions
• Qualify and sustain manufacturing processes to scale up capacity swiftly and maintain with quality and urgency
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards
• Design and execute experiments, analyze complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Implement statistical process control methods to establish and uphold robust manufacturing processes

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Electrical and Electronics Engineering, Chemical Engineering, Material Science, Physics or STEM related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Industrial Engineer to be part of our Industrial Engineer Department diverse team of talent.

What you will be working on:

• Maintain and improve capacity planning methodologies to ensure accuracy
• To achieve planned mix & capacity through equipment utilization improvement/conversion/other capacity improvement plans to ensure the plans meet operations goals
• Establish layout plans for all production equipment based on operation needs
• Ensure timely equipment installation/release for production to meet operation’s needs
• Initiate Tool-to-Tool Matching (Golden/Lemon) as well as Best-In-Class benchmarking to strie for the best perforamnce of the tools
• Update/maintain tool capacity/productivity database for capacity planning & productivity indices tracking
• Manage capital budget to reflect necessary equipment requirement for capacity mix and new technology introduction
• Establish standard costing methodologies & wkly/qtly/annual standard costing
• Cost management (forecast/tracking/improvement/modeling/analysis/benchmarking)
• People productivity management/coordination
• Initiate/lead/drive continuous improvement projects & Best-Known-Method sharing
• Strategic planning initiatives for capacity expansion, tool/people productivity improvement & cost reduction
• Lead/coordinate people productivity/automation initiatives. Headcount modelling
• Business Continuity Management and Risk assessment
• Enhance current systems, improve methodology & modelling
• Coach/mentor & train new Engineers/Associate Engineers

More about you:

• Degree in Industrial Engineering/ Mechanical/ Manufacturing
• Functional / Technical skills and knowledge: Knowledge in semiconductor processes and IE tools used in the semiconductor industry
• Computer skills : MS Office, MS Access, VBA, SQL, Oracle, Cognos, AutoCAD
• Strong communication and presentation skills
• Team player with strong problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Etch diverse team of talent. You will be responsible to manage the integration of all modules' processes and the respective derivatives.

What you will be working on:

• Responsible for new Process Development and/or Process Transfer
• Process optimization for Yield and Productivity improvement
• Troubleshoot and resolve Process related issues
• Sustain and/or improve Process Capability, CpK
• Qualify and release tools for required MFG capacity
• Qualify alternate sources for Cost improvement
• Plan and execute Engineering Projects
• Continuous improvement through participation in 10k idea, LSS & BKM to create cost effective and robust processes with quality
• Setup, monitor and maintain SPC charts
• Adhere and complete necessary documentation

More about you:

• Bachelor Degree in Engineering / Science or equivalent
• 1-3 years relevant experience in Semiconductor manufacturing environment
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Rapsodo Inc. is a sports analytics company that uses computer vision and machine learning to help all athletes maximize their performance. Our proprietary technology applications range from helping PGA Tour golfers optimize their launch conditions to allowing MLB pitchers to increase the efficiency of their breaking balls. Current partners include all 30 MLB teams, MLB, USA Baseball, Golf Digest, PGA of America, and over 1000 NCAA athletic departments.

New Product Introduction (NPI) is the end-to-end process of bringing a new product to the market from design concept to the end customer. It broadly encompasses the following stages of the engineering team: Lab Prototypes (LP), Production Prototypes (PP) & Production Ramp (PR).

As an NPI Engineering Intern at Rapsodo, you will be exposed to the different stages of NPI for Rapsodo’s upcoming products to be released. You will also be exposed to the manufacturing environment of how our products are built and supported by our Research & Development (R&D) Team.

Roles & Responsibilities

• Gain invaluable exposure into Singapore’s Technology Sector

• Be exposed to the different stages of the NPI process for Rapsodo’s upcoming products

• Assist with building prototypes

• Provide feedback for the prototypes you build

• Be involved in investigative study with our R&D Team

• Be exposed to working with our Software Test Team, Purchasing Team as well as Manufacturing Team

• Pursuing Diploma in Electrical, Mechanical Engineering or any related Engineering discipline

• Responsible, hardworking and a team player

• Good attitude to learn and contribute to the team

• Pro-active, organized & meticulous and able to work independently in a fast-paced environment

• Have strong analytical, problem solving and inter-personal skills

• Excellent written and oral communication skills with the ability to present ideas and results to technical and non-technical audiences

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Senior Manager/ MTS to be part of our Facilities Department diverse team of talent. You will be the Subject-Matter-Expert for the Operation & Maintenance.

What you will be working on:

• Manage facilities operation team with 12-hour shift duties for 24 hours support to Fab.
• Manage round check on site, check on all consoles and servers of facilities control and monitoring systems in shift basis.
• Alarm handling, emergency response and actions in case of excursion happened by managing 1st line incident handling, breakdown repair works as well as actively participate in ERT incident.
• PM management - Ensure scheduled preventive maintenance (PM) and Corrective Maintenance (CM) executive and tracking till closure.
• Prepare operation summary report, including PM execution, alarm counts and analysis, SPC and analysis, round check, call in services, utilities usage and others if needed, say ESG. Besides, engineering or trouble shooting activities are also part of the report. The report shall be prepared, including daily, weekly, monthly, quarterly and annually.
• Training and Certification program for on duty team members.
• Coach, mentor and train team members on technical know-how to ensure department technical competencies are up to the highest standard.
• Manage activities isolation or lock out/tag out for after office hours contractor works.
• Review, recommend and implement changes to workflow to achieve company and department goals in relation to cost saving and operational improvement.
• Complies with internal SOPs, external regulatory and EHS requirements.
• Participate in continuous improvement projects.
• Perform/support quality investigations in a timely and thorough manner.
• Working closely with systems owners, Quality team ensuring optimal plant performance as well as troubleshooting issues and drive root cause analysis
• Support GEMBA walk and other duties as necessary

More About You:

• Master/ Degree in Electrical/ Mechanical/ Electronic/ Chemical/ Environmental Engineering
• Min 10 years of relevant experience in Semiconductor Wafer Fab environment
• Min 5 years’ management experiences
• Wafer fab operation experiences is a must
• Strong technical knowledge for at least in two disciplines of four major disciplines – electrical & control, mechanical, water treatment, gas & chemical systems.

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You are responsible for ensuring robust infrastructure, managing servers, databases, analyzing system operations, and supporting digital transformation in semiconductor manufacturing.

Key Responsibilities:

• Assisting in the IT infrastructure to ensure the seamless operation of a semiconductor intelligent manufacturing.
• Handling digital transformation initiatives within the organization to enhance operational efficiency and effectiveness.
• Navigating the complexities of international IT projects, ensuring successful collaboration and cross-cultural teamwork.
• Assisting in Fab infrastructure system solutions.
• Performing server, storage, and database management to maintain optimal system performance and reliability.
• Conducting system operation optimization analysis to identify and implement improvements for enhanced performance.

Education Qualification & Essential Experiences:

• Diploma in Computer Science, Electrical, Mechanical, Information Technology or a related field.
• Strong understanding of semiconductor technology is preferable.
• Knowledge of SPC, FDC, CIM, and Full Automation
• Proficient in at least one of the following programming languages: C, C++, C#, Java, or Python.
• Capability of RTD (Real-Time Dispatching) is a plus.

Personal Attributes:

• Must be available to travel to Taiwan for a training period lasting 6 to 9 months.
• Able to be reliable and accountable in all tasks and responsibilities.
• Have the drive to achieve goals and complete tasks independently.
• Proficient in effectively conveying information through both written and verbal communication.
• Open to taking on challenging tasks and embracing new opportunities.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to analysis of production lines to identify improvement, fostering cross-departmental collaboration for project implementation, and utilizing data analysis for management reporting. It involves optimizing automated production systems for efficiency, supervising personnel and machinery, and ensuring production targets are met.

Key Responsibilities

• Conduct in-depth analysis of production lines and promote cross-departmental cooperation to propose and implement improvement projects.
• Utilize data analysis for effective management reporting.
• Optimize and maintain automated production systems to enhance efficiency.
• Supervise personnel and machinery while driving the achievement of production targets.

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Computer Science, Industrial Engineering or engineering related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible and focus on improving tool performance and availability, in charge if maintenance, diagnosing failures and implementing effective solutions to meet uptime and cycle time requirements in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD); or Physical Vapor Deposition.

Key Responsibilities

• Maintain equipment performance in cleanroom environment for quality production.
• Handle on-duty tasks and conduct fundamental alarm troubleshooting; identify root cause and problem-solve critical equipment issues with urgency
• Install and qualify new tool sets on schedule to increase capacity promptly
• Continually improve tool uptime availability, drive defect reduction and enhance hardware capability
• Develop defense and monitoring system to prevent equipment failure or performance lost.
• Analyze complex data sets and derive actionable insights to optimize equipment parameters and controls
• Actively collaborate with equipment suppliers and partners to identify tool deficiencies; develop, evaluate, and validate corrective and preventive solutions

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

The Senior Treasury Specialist will manage and optimize the company’s treasury operations, ensuring liquidity, cash management, risk management, and compliance with financial regulations. This role requires advanced analytical skills, deep knowledge of financial markets, and experience in implementing treasury best practices. The Senior Treasury Specialist will work closely with internal stakeholders and external financial institutions to drive the company's financial health and stability.

Key Responsibilities:

Cash and Liquidity Management

• Monitor and manage daily cash positions, ensuring optimal cash flow and liquidity across accounts.
• Forecast cash requirements and develop strategies to meet short-term and long-term financial obligations.
• Oversee corporate debt such as short-term or long-term loan and evaluate available financial options.
• Identify and recommend investment and borrowing opportunities in line with company policy. Prepare periodic performance analysis.

Banking Relationships

• Maintain strong relationships with banking partners, ensuring efficient communication and negotiation of banking services and fees.
• Coordinate with banks on credit facilities, foreign exchange transactions, and other treasury-related activities.

Risk Management and Compliance

• Identify, measure, and mitigate financial risks, including foreign exchange, interest rate, and liquidity risks. Implement FX hedge according to asset/liability position.
• Ensure compliance with financial policies, regulations, and treasury-related controls.
• Collaborate with the accounting and compliance teams to maintain accurate documentation and reporting standards.

Treasury Operations and Systems

• Manage and optimize treasury management systems and processes for efficiency and accuracy.
• Implement and maintain policies for cash management, forecasting, and reporting.
• Drive process improvement initiatives to streamline treasury workflows and reduce operational risks.

Financial Reporting and Analysis

• Prepare and analyze treasury reports, including cash flow forecasts, financial performance, and variance analyses.
• Support month-end and quarter-end closing activities, including reconciliations and reporting.
• Provide insights to senior management on cash flow trends, risks, and opportunities.

Strategic Projects and EDB Claims

• Support ad hoc projects related to treasury strategy, working capital optimization, and financial planning.
• Claim fixed asset investment (FAI) with EDB and liaise with auditor in respect of audited documents.

Education Qualification & Essential Experiences:

• Bachelor’s degree in Finance, Accounting, Business, or a related field. A master’s degree or relevant certification (e.g., CTP, CFA) is preferred.
• Minimum 3 years of experience in corporate treasury, finance, or banking, with a focus on cash management, forecasting, and risk management.
• Advanced knowledge of treasury management systems and financial modeling.
• Proficiency in financial software (e.g., SAP, Oracle, or similar) and MS Office, particularly Excel.
• Strong financial knowledge of financial instruments, credit facilities and treasury best practices

Key Competencies:

• Problem Solving: Ability to analyze complex financial situations and develop practical solutions.
• Adaptability: Able to handle dynamic and fast-paced environments, adapting strategies as needed.
• Strategic Thinking: Strong business acumen and the ability to align treasury operations with broader company goals.
• Ethics and Integrity: Committed to upholding ethical standards and ensuring compliance with financial regulations.
• Analytic Skills: Strong analytical skills, attention to detail, and a high level of accuracy.
• Communication Skills: Excellent communication and relationship management skills.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD) or Physical Vapor Deposition (PVD)

Key Responsibilities

• Maintain smooth daily manufacturing operations and problem solve issues promptly
• Actively collaborate with equipment and material suppliers and partners to identify technology deficiencies; develop, evaluate, and validate corrective and preventive solutions
• Qualify and sustain manufacturing processes to scale up capacity swiftly and maintain with quality and urgency
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards
• Design and execute experiments, analyze complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Implement statistical process control methods to establish and uphold robust manufacturing processes

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Electrical and Electronics Engineering, Chemical Engineering, Material Science, Physics or STEM related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You will be responsible for ensuring quality control in semiconductor manufacturing processes, managing engineering changes, resolving production issues, and driving continuous improvement.

Key Responsibilities :

• Develop, implement, and maintain quality control measures for semiconductor manufacturing processes.
• Monitor production data to identify trends and initiate corrective actions to improve yield and reliability.
• Review and validate quality systems and specifications for new equipment and processes.
• Ensure smooth integration of new technologies into the production line with a focus on maintaining quality standards.
• Manage quality control for engineering changes in wafer fabrication, including reviewing change requests, conducting risk assessments, and ensuring compliance with quality standards.
• Oversee the quality of incoming masks through inspections and audits.
• Collaborate with mask suppliers to identify quality issues, implement corrective actions, and drive continuous improvement initiatives.
• Lead the response to major abnormal events in the wafer fab, including root cause analysis and corrective actions.
• Manage RMAs and work with customer quality teams to resolve issues and improve customer satisfaction.

Education Qualification & Essential Experiences:

• Education: Bachelor's degree or higher in Electronics, Physics, Materials Science, or other related engineering fields.
• At least 5 years of relevant work experience.

Personal Attributes:

• May need to travel to Taiwan for a training period lasting 6 to 9 months.
• Excellent coordination and communication skills, with the ability to work independently and manage multiple tasks effectively in a fast-paced environment.
• Able to be reliable and accountable in all tasks and responsibilities.
• Have the drive to achieve goals and complete tasks independently.
• Proficient in effectively conveying information through both written and verbal communication.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You will be responsible for ensuring wafer products meet quality standards by developing shipment procedures, improving processes, resolving anomalies, and overseeing staff training.

Key Responsibilities :

• Develop and maintain wafer product shipment standards and procedures to ensure alignment with customer quality requirements.
• Improve the quality of wafer product shipments by identifying areas for enhancement and implementing corrective and preventive actions.
• Analyse and address quality control inspection anomalies, promptly resolving customer complaints.
• Conduct process analysis and lead continuous improvement initiatives for semiconductor products to elevate overall product quality.
• Oversee training and certification programs for quality control personnel to ensure strict adherence to quality standards and procedures.

Education Qualification & Essential Experiences:

• Bachelor's degree or higher in Electronics, Materials, Chemical Engineering, or other related engineering or science disciplines
• At least 1 years of relevant work experience.

Personal Attributes:

• May need to travel to Taiwan for a training period lasting 6 to 9 months.
• Excellent coordination and communication skills, with the ability to work independently and manage multiple tasks effectively in a fast-paced environment.
• Able to be reliable and accountable in all tasks and responsibilities.
• Have the drive to achieve goals and complete tasks independently.
• Proficient in effectively conveying information through both written and verbal communication.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You will be responsible to ensure the reliability and stability of semiconductor processes and achieve it through advanced testing, analysis, and collaboration with both internal teams and external clients.

Key Responsibilities:

• Develop and implement reliability assessment systems for semiconductor processes, including TDDB, HCI, BTI, PID, EM, and SM.
• Design and conduct reliability tests to evaluate process performance and durability, analyse test data, and provide recommendations for process technology improvements.
• Provide expert technical support to clients by diagnosing reliability issues, addressing their concerns, and delivering solutions to improve process performance.
• Assist the manufacturing team in managing abnormal events by conducting reliability risk assessments and suggesting improvements to mitigate risks.

Education Qualification & Essential Experiences:

• Bachelor’s degree or higher in Electronics, Electrical Engineering, Physics, or a related technical field.
• Minimum of three years of relevant experience in semiconductor process reliability engineering.
• Strong problem-solving skills and a detail-oriented approach with the ability to analyse complex data and derive insights.

Personal Attributes:

• Excellent coordination and communication skills, with the ability to work independently and manage multiple tasks effectively in a fast-paced environment.
• Able to be reliable and accountable in all tasks and responsibilities.
• Have the drive to achieve goals and complete tasks independently.
• Proficient in effectively conveying information through both written and verbal communication.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.es.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a newly established joint-venture dedicated to building a 300mm semiconductor wafer manufacturing facility in Singapore. We are seeking passionate, resilient, and dedicated professionals to help us launch a promising future that will power the next generation of devices and systems. If you share our commitment to excellence and want to make a lasting impact, join us and be part of something extraordinary!

Key Responsibilities

• Lead the conceptual design and RFP preparation for the Tool Installation/Hookup in a 300mm semiconductor fabrication plant.
• Supervise and track the design progress of Tool Installation/Hookup contractors and design consultants.
• Manage on-site construction schedules and oversee the commissioning of the Tool Installation/Hookup package.

Education Qualification & Essential Experiences

• Bachelor's degree in Electrical/Electronic Engineering or a related field.
• Experience with Tool Installation/Hookup in semiconductor 300mm fab facility.
• Familiar with 3D CAD design, Tool Hookup Connection, platform installation and tool move in are preferable.
• Proficient in computer software such as Microsoft Office, Microsoft Project, AutoCAD, Autodesk Revit etc.
• A proactive attitude and strong teamwork skills, with experience in construction projects.

Key Skills and Attributes

• Strong interpersonal and communication skills, with the ability to collaborate effectively across functions and teams from diverse backgrounds.
• Excellent analytical and problem-solving abilities, focused on delivering positive outcomes.
• Goal-oriented and a team player, able to perform under pressure in a fast-paced, dynamic environment.
• A growth mindset, prioritizing adaptability, resilience, innovation, and continuous learning to meet business needs.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

The Senior Cost Accountant will play a critical role in supporting the company’s financial health by managing and analyzing the costs of products, projects, and services. This position focuses on tracking, analyzing, and reporting the costs associated with business operations, driving improvements in cost efficiency, and supporting strategic decisions. The ideal candidate will have a solid background in cost accounting, analytical skills, and experience with manufacturing or production environments.

Key Responsibilities:

Cost Analysis & Reporting:

• Analyze product, labor, and material costs, and prepare detailed reports to support financial decision-making.
• Develop and maintain standard costs and manage cost updates and variances.
• Review and analyze cost data to identify trends and recommend adjustments to optimize production costs.
• Prepare and oversee cost of good manufacturing and inventory monthly close, and analyze actuals with forecasts, and budgets as well as other ad-hoc reports for management.

Inventory Management:

• Monitor and reconcile inventory accounts, ensuring accurate reporting and valuation.
• Conduct monthly and annual physical inventory counts and coordinate cycle counts as needed.
• Manage inventory reserves, and make recommendations for adjustments based on current and forecasted needs.

Financial Planning & Analysis:

• Support the budgeting and forecasting process by providing detailed cost data and analysis.
• Collaborate with production and operations teams to improve costing and efficiency.
• Develop and analyze key cost metrics, helping teams understand cost drivers and work to reduce waste.

Internal Controls & Process Improvement:

• Ensure compliance with internal control policies, company standards, and GAAP.
• Continuously seek to improve cost accounting processes and systems, identify gaps, and implement best practices.
• Support the financial audit process by preparing and reviewing cost-related documents.

Cost System Maintenance:

• Maintain and update the cost accounting system, ensuring accuracy and consistency.
• Work closely with IT and ERP systems teams to resolve costing issues and optimize the system's performance.

Education Qualification & Essential Experiences:

• Bachelor’s degree in Accounting, Finance, or related field; CPA or CMA preferred.
• Minimum 3 years of experience in cost accounting, preferably in Fab/Manufacturing environment.
• Strong knowledge of IFRS/GAAP and cost accounting principles.
• Proficiency in ERP systems (SAP, Oracle, or similar) and advanced MS Excel skills.

Key Competencies:

• Strong organizational skills and the ability to prioritize multiple tasks effectively.
• Excellent verbal and written communication skills to collaborate with cross-functional teams.
• Self-starter with strong problem-solving abilities and a proactive approach to process improvement.
• High level of integrity and commitment to ethical standards.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Responsibilities

• Lead a team of line leaders and operators to meet daily production output, quality, productivity and yield.

• Conduct daily pass-down meetings and escalate line issues if any

• Oversee manpower/overtime and consumables planning

• Ensure manufacturing and safety procedures are being followed

• Conduct training/coaching to leaders & operators to improve performance

• Implement ideas and improvement activities to prevent human errors

• Ensure good discipline and housekeeping in the line

• Coordinate with other departments to support projects, evaluations and preventive maintenance activities in the fab

Requirements

• Diploma/Degree in Engineering/Science/Production/IT

• Preferably experienced in high-tech, high-vol manufacturing environment

• Good leadership and communication skills

• Willing to work 12-hour shifts (day or night)