Abbott is a global healthcare leader, creating breakthrough science to improve people’s health. We’re always looking towards the future, anticipating changes in medical science and technology.

PRIMARY FUNCTION:

• Responsible for overseeing the Operation and Maintenance of assigned Utility systems including: Non-GMP and GMP Utilities and Non-GMP and GMP HVAC equipment; including but not limited to other equipment: Boilers, Chillers, Air compressors, Building Management System, CO2, N2, Effluent Treatment Plant, Water Treatment.
• Accountable for Operation, Maintenance and monitoring regimes and play a key role in improving Utilities reliability rates, maintaining compliance, providing for a safe work environment, and controlling costs of the Utilities operations.
• To provide support to ongoing plant operations on a 24 x 7 basis and ensure total compliance to regulatory, cGMP and Environment, Health and Safety (EHS) standards
• Supervise contractors, and technicians and provide day to day operational support and maintenance services including, modifications and changes to processes and equipment, troubleshooting, deviation investigation, identification, and completion of corrective and preventative actions.
• Oversee the day-to-day operations and routine/ breakdown maintenance of Utilities Equipment systems
• Maintain operations and maintenance records to comply with regulatory, cGMP and EHS requirements.
• Take ownership of utility systems as the Subject Matter Expert
• Participate in corporate, regulatory, cGMP, EHS and other internal/ external audits as required by the management.
• Analyze technical problems in the utility and manufacturing areas and develop both short term and long-term recommendations for their correction. Lead or assist cross-functional teams in finding solutions to technical problems.
• Actively engaged in developing specifications for equipment and utility systems and assist in FAT/ SAT of related equipment as part of the new buildouts
• Participates in vendor bid solicitation, selection and contract management.
• Responsible for the performance of preventative & repair maintenance of utility system equipment, periodic inspections of utility systems to ensure proper operation, and daily checks/repairs in compliance with Standard Operating Procedures (SOPs).
• Analyze trends and identify issues and improvement opportunities proactively.
• Coaching and mentoring of Technicians in the execution of routine operations and maintenance works.
• Ensure that contractors are delivering quality services.
• Ensure that all internal customer demands are being met.
• Compliance with local regulatory laws is also required.

MAJOR RESPONSIBILITIES:

• Responsible for overseeing the Operation and Maintenance of assigned Utility systems including Non-GMP and GMP Utilities and Non-GMP and GMP HVAC equipment; including but not limited to other equipment: Boilers, Chillers, Air compressors, Building Management System, CO2, N2, Effluent Treatment Plant, Water Treatment.
• Responsible for developing the standard operating procedures, implementing of preventive and predictive maintenance, calibration program to ensure utilities equipment are maintained to thehighest level of Safety & Quality. This includes routine and plant major shut down activities.
• Responsible for support and execution of equipment qualification such as commissioning, IQ/ OQ/ PQ.
• Lead a team of technicians and contractors for day-to-day utilities operations to ensure zero
• downtime of utilities systems and drive continuous improvement projects/ initiatives.
• Preparing operation and maintenance zero base budget.
• Carry out other work or task as directed by Manager.

REQUIREMENTS:

• Bachelor of Engineering Degree in Mechanical/ Electrical/ Chemical/ Engineering or related discipline
• MOM certified Steam Engineer Certification preferred
• Minimum 3 years of relevant experience in Utilities/Mechanical/Maintenance/Electrical engineering related positions
• Hands-on experience in routine operations, maintenance, engineering design, start-up, and commissioning of the relevant Utilities Discipline
• Knowledge of cGMP is highly preferred
• Good planning and supervisory and strong interpersonal skills.
• Good contractor management skills.
• Mentoring and coaching skills.
• Excellent leadership and communication skills
• Green belt certification preferred.

*Kindly note this position is based in Tuas.

Roles & Responsibilities

Responsibilities:

• Handle payroll, yearly Auto-Inclusion Scheme submission and leave management - own the payroll process and contribute to its continuous improvement
• Administration/Employee Data Management matters
• Handle recruitment matters pertaining to interns
• Support recruitment process (including recruitment, on-boarding, confirmation, off-boarding and orientation)
• Data management of leave and claims in HRIS
• Support performance appraisal process and compensation and benefits activities
• Childcare leave claim submission and tracking
• Support work pass matters (New applications, renewals, cancellations)
• Handle and resolve employee queries
• Other ad-hoc tasks assigned

Requirements:

• Experience – 3 year of experience
• Language – English required, and Mandarin preferred
• Personnel and Human Resources — Knowledge of labour law (MOM)

1. Manage Full Spectrum of General Ledger
2. Financial Reporting and Compliance
3. Prepare Financial Statements & Management Report
4. Experience in Compliance with J Sox is advantage
5. Tax Compliance
6. Handle Goods and Service Tax Filing and Compliance with Corporate Tax Requirements
7. Manage Annual Budgeting and Variance Analysis
8. Support Annual Stock Take
9. Support Internal and External Audit
10. Support Governance Compliance Matters

Requirements

1. Minimum 5-6 Years Relavant Experience, Preferably in Manufacturing Industry
2. Experience in using Accounting Software (e.g. SAP, Oracle or Similiar ERP System.)
3. Proficient in Microsoft Office Application

Personality

1. Mature, Proactive, Resourceful and Hands-On
2. Strong Sense of Responsibility and Urgency
3. Fast Worker
4. Able to work under Stress
5. Strong, Analytical and Problem-Solving Skills.
6. Meticulous
7. Good Communication and Team Collaboration Skills

- Monitor, receiving, storing, packing/unpacking of goods.

- To conduct inventory count and to verify stock discrepancies.

- Maintain cleanliness / good housekeeping in store.

- Update to System.

- Any other ad-hoc duties when required.

Abbott is a global healthcare leader, creating breakthrough science to improve people’s health. We’re always looking towards the future, anticipating changes in medical science and technology.

Primary Function / Primary Goals / Objectives:

• Lead site wide implementation of Food Safety initiatives. Consulting with Division Food Safety SME where necessary.
• Drive and implement continuous improvements to enhance quality and food safety in our products in a cost effective manner.
• Develop training materials and conduct training as part of roll out of Food Safety initiatives.
• Monitor and report project milestones. Ensures timely and successful execution of changes.
• Improve Food Safety culture and raise awareness of Food Safety through various initiatives.
• Improve site Hazard Analysis Critical Control Point (HACCP) system.

Major Responsibilities:

• Establish project milestones and ensures tracking for timely completion.
• Training of cross functional team on the new Food Safety initiatives.
• Implement Change Management Tools (example, CLRS) to ensure successful roll out of Food Safety initiatives.
• Drive continuous improvement projects to drive efficiency and cost for the plant.
• Establish Standard Operating Procedures for new Food Safety initiatives.
• Implement improvements to site HACCP and risk assessment.
• Any other duties as assigned by Supervisor.

Requirements:

• Bachelors’ Degree in engineering (chemical / biomedical), manufacturing, industrial management, or a related field.
• Min 3 years of experience in quality project management, preferably in food/pharmaceutical manufacturing industry.
• Good practical knowledge of GMP in food / pharmaceutical manufacturing.
• Good leadership and problem-solving skill.
• Good communication and report writing skill.
• Good project management skill.
• Team player with initiative, drive, good communication skills and a strong command of written English.
• Knowledge in HACCP and risk assessment.
• Knowledge in food engineering and experience in a dairy / nutritional industry would be advantageous.
• Knowledge and experience in driving cultural changes in organization is preferred.

*Kindly note this position is based in Tuas and it is a 12-month contract opportunity.

Follow your career aspirations to Abbott for diverse opportunities with a company that can help you build your future and live your best life. Abbott is an Equal Opportunity Employer, committed to employee diversity.

Provide process engineering expertise for process design, process scale-up, trouble-shooting and process efficiency improvements. Interrogate laboratory working directions to determine optimum plant configuration to ensure that the process [chemistry + plant] meets the scale-up objectives in a safe manner. Support capital projects for R&D Jurong.

Key Responsibilities

Lead process engineering activities for NCE projects in the pilot plant

• Review of chemistry scale-up requests with Chemists, Operations and Engineering to determine optimum plant configuration.
• Define detailed plant and modification design. The time period for introducing new chemistry onto plant is usually less than 4 weeks, during which time any new equipment requirements must be identified, designed, fabricated, installed [by on-site staff or contractors], commissioned, tested and operating staff trained in use before chemical processing starts.
• Agree level of hazard assessment with Operations and complete Process Risk Assessment.
• Review batch record, carry out installation checks, write WI [Work Instruction] or SOP [Standard Operating Procedure] as required and train operators.
• Support campaign on plant, troubleshooting any engineering issues.

Technology Transfers

• Generate sufficient process engineering information for GSC to ensure that the process can be effectively introduced into the desired production plant.
• Support synthetic organic chemists, process safety scientists, and process chemists in the design of processes suitable for effective scale-up.
• Assess critical process characteristics and requirements as well as existing plant capabilities and limitations by gathering and interpreting suitable experimental data.
• Significantly contribute to the development of robust manufacturing processes for the synthesis of bulk drug substance by evaluating alternative processing strategies and recommending potential process improvements.
• As a member of the ChemDev project team, identify and effectively communicate the best suitable scale-up strategy for a process including recommendations for the application of new processing technologies.
• Play an important role in facilitating a seamless technology transfer of processes to GSC by the application of state-of -the-art tools and procedures.

Capital Projects

• Act as client representative for capital projects, to ensure all the customer needs are incorporated into the design and installation of new plant and equipment.
• Identify areas of weakness in the portfolio of processing technologies (plant and equipment) and submit proposals to address these.
• Define and seek approval for the detailed project scope of plant and equipment projects, and obtain approval for capital orders and PIP's.
• Review and make recommendations on design proposals put forward by contractors, project engineers, and equipment suppliers.
• Organise HAZOP studies, act as technical recorder, and issue HAZOP report for all installations where appropriate.
• Issue commissioning programmes, lead commissioning activities, and issue final reports.
• Carry out pre-delivery inspection visits for new equipment, prior to acceptance on site.
• Compile equipment WIs.

Knowledge, Skills & Experience

• Min A level certification
• Experience in pharmaceutical industry
• Experience in pharmaceutical process
• In depth working knowledge of the safety and compliance requirements for equipment and systems used in it.
• Strong written and verbal communication skills.
• Ability to multi-task and prioritize workload

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore

#Li-GSK

Why GSK?

Uniting science, technology and talent to get ahead of disease together.

GSK is a global biopharma company with a special purpose – to unite science, technology and talent to get ahead of disease together – so we can positively impact the health of billions of people and deliver stronger, more sustainable shareholder returns – as an organisation where people can thrive. We prevent and treat disease with vaccines, specialty and general medicines. We focus on the science of the immune system and the use of new platform and data technologies, investing in four core therapeutic areas (infectious diseases, HIV, respiratory/ immunology and oncology).

Our success absolutely depends on our people. While getting ahead of disease together is about our ambition for patients and shareholders, it’s also about making GSK a place where people can thrive. We want GSK to be a place where people feel inspired, encouraged and challenged to be the best they can be. A place where they can be themselves – feeling welcome, valued, and included. Where they can keep growing and look after their wellbeing. So, if you share our ambition, join us at this exciting moment in our journey to get Ahead Together.

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

Roles & Responsibilities

Responsibilities:

• Handle payroll, yearly Auto-Inclusion Scheme submission and leave management - own the payroll process and contribute to its continuous improvement
• Administration/Employee Data Management matters
• Handle recruitment matters pertaining to interns
• Support recruitment process (including recruitment, on-boarding, confirmation, off-boarding and orientation)
• Data management of leave and claims in HRIS
• Support performance appraisal process and compensation and benefits activities
• Childcare leave claim submission and tracking
• Support work pass matters (New applications, renewals, cancellations)
• Handle and resolve employee queries
• Other ad-hoc tasks assigned

Requirements:

• Experience – 3 year of experience
• Language – English required, and Mandarin preferred
• Personnel and Human Resources — Knowledge of labour law (MOM)

This role is responsible for planning raw materials, Flavours and Vendor Directs by maintaining safety inventory levels and replenishing based on MRP requirements. Be a back-up for the other raw materials Planner (Non Flavours and Packaging).

Responsibilities:

1. Analyze SAP purchase requisitions and convert to PO’s on timely basis for Flavors and Vendor Directs
2. Manage exceptions such as expedites and postponements or cancellations.
3. Be the data owner for these materials
4. Daily interaction with Production Planners, quality, receiving, freight forwarder to provide updates on raw material availability
5. Management of PO relating to vendor direct items and full process since PO creation until confirmation of shipment; and coordination of internal activities
6. Responsible for providing feedback for New Product Introduction via e-ICE maintenance for common materials
7. Ensure accuracy and maintenance of Safety Stock and raw materials planning master data
8. Meet key inventory and material planning metrics
9. Identify and manage opportunities to optimize SAP functionality
10. Maintain Materials Dashboard KPIs which include PO management, RM shortage, Order Acknowledgement, SOH vs Safety, Shelf life and RM availability
11. Provide accurate and timely feedback in relation to Inventory in Risk (MIRA)
12. Lead and implement projects for inventory optimization and process improvements
13. Monitoring supplier quality and delivery performance and collaborate with procurement team to resolve supply issues
14. Meet all internal and external compliance responsibilities including Purchasing Policy requirements, GCS, SOX & AIBI
15. Adherence to all PepsiCo Health & Safety requirements is a requirement of this role
16. Any other ad hoc duties and projects as assigned

Requirements

Education or Professional Certifications (minimum level required e.g. Bachelor’s degree, Diploma and/or certifications)

• Bachelor’s Degree in Supply Chain, Inventory or Materials Planning
  

Experience (number of years of directly related operational or leadership experience and to specific industry if need be)

• At least 5 years of experience in a related Supply Chain or Operations role particularly in raw materials planning
• Strong operational experience in a dynamic multinational organization
• Experience working closely with third parties and colleagues in remote locations to deliver business objectives an advantage
• Experience in FMCG is a plus.
  

Knowledge and job skills (technical know-how or professional knowledge and job skills required by this post)

• Ability to manage multiple and complex tasks
• Proven ability to execute and deliver on commitments
• Possess knowledge of SAP MM module
• Knowledge of SAP module will be an advantage
• Strong Computer literacy, particularly in MS Office, excel
• Power BI knowledge would be an advantage

Soft skills

• Excellent analytical skill, with proven ability in problem solving and quick decision making
• Excellent interpersonal skill and communication skill in, both verbal and written
• Ability to energize, develop and build rapport at all levels within an organization

Other characteristics or attributes

• Be capable of working effectively in a cross functional and virtual environment.
  

Mandatory Skills

• Recent experience in working with Java J2EE applications
• Experience in application support role for min 1 years for support or Developers willing to learn with good knowledge of Java, Unix, SQL
• Experience in programming languages such as JAVA/J2EE.
• Experience in Unix commands , SQL queries
• Knowledge of web applications, batch jobs, JBOSS, MariaDB, SQL, Shell
• Knowledge of Job scheduling, MQ setup , C:D setup experience is a plus
• Exposure to banking industry is a plus
• Dynamic individual with thirst to learn
• Strong team player with excellent inter-personal skills
• Ownership oriented and ability to meet SLAs with no compromise on the quality of the work

Requirements

• Must be graduate from IT or Computer Science
• Must have IT background and intermediate knowledge and hands on experiences with SQL and Linux
• Need to have eagerness to learn and perform with committment

Kindly take note of the following details for shift work

1. Allowance should be included in the monthly hiring rate.
2. Transport is claimable - before 7am (for morning shift 6am to 3pm) , after 11pm (afternoon shift 2pm to 11pm)
3. Shift Timing
   1. Morning shift 6am to 3pm
   2. General shift 9am to 6pm.
   3. Afternoon shift 2pm to 11pm
   4. Night shift 10pm to 7am.
4. Need to support including night shift, weekends and public holidays

KEY DUTIES AND RESPONSIBILITES:

REQUIREMENT

• Support the generation of cGMP documentation including qualification protocols, SOP and production batch record issuance.
• Co-ordinate internal review and approval of documentation
• Proactively progress documents to achieve schedule adherence and to site policies & compliance with cGMP’s.
• Initiating Production Change control, deviation, and handling of related CAPA activities, task implementation using Trackwise. Assist in the preparation of reports/presentations as required.
• To update and format documentation including SOPs, forms, logbooks, and label templates.
• Prepare label templates and print labels as required for finished product.
• Write/review manufacturing documentation (SOPs,Manufacturing Records & Logbooks) ensuring it is current, accurate and in accordance with regulatory requirements.
• Track and trend relevant technical and business process metrics to ensure operations are performing effectively and efficiently.
• To arrange quotation and purchase requisition all required production consumables.

EDUCATION & EXPERIENCE

• Minimum Diploma qualification in life science, engineering or related qualification
• Minimum of 5 years’ experience working in a regulated manufacturing environment.
• Experience in a cGMP facility, in a documentation role is desirable.
• Experience with facility start-up projects (brown field or green field) is desirable.
• Excellent computer skills MS Office (WORD, EXCEL, PowerPoint).
• Good communication and interpersonal skill.

Mandatory Skills

• Recent experience in working with Java J2EE applications
• Experience in application support role for min 1 years for support or Developers willing to learn with good knowledge of Java, Unix, SQL
• Experience in programming languages such as JAVA/J2EE.
• Experience in Unix commands , SQL queries
• Knowledge of web applications, batch jobs, JBOSS, MariaDB, SQL, Shell
• Knowledge of Job scheduling, MQ setup , C:D setup experience is a plus
• Exposure to banking industry is a plus
• Dynamic individual with thirst to learn
• Strong team player with excellent inter-personal skills
• Ownership oriented and ability to meet SLAs with no compromise on the quality of the work

Requirements

• Must be graduate from IT or Computer Science
• Must have IT background and intermediate knowledge and hands on experiences with SQL and Linux
• Need to have eagerness to learn and perform with committment

Kindly take note of the following details for shift work

1. Allowance should be included in the monthly hiring rate.
2. Transport is claimable - before 7am (for morning shift 6am to 3pm) , after 11pm (afternoon shift 2pm to 11pm)
3. Shift Timing
   1. Morning shift 6am to 3pm
   2. General shift 9am to 6pm.
   3. Afternoon shift 2pm to 11pm
   4. Night shift 10pm to 7am.
4. Need to support including night shift, weekends and public holidays

Job Description

Responsibilities

• Loading and uploading of goods onto vehicle according to delivery order
• Perform pickups and collection for the company covering specific areas
• Ensuring safe receipt, retrieval and dispatching of goods
• Delivering goods to our customers in a safe, courteous, and timely manner
• Establishing and maintaining excellent customer service during delivery
• To perform duties as tasked
• Class 3/4 Driving licence
• Able to work night shift and split shift
• Able to work ot on weekend and public holiday

Roles & Responsibilities

Responsibilities:

• Able to take measurement on site and sketch the drawing accordingly to the site requirements
• Use AutoCAD to create technical drawings within the time frame
• Prepare drawing and calculations for submission
• Maintain drawing records and report
• Perform other duties or tasks as assigned

Requirements:

• Fresh graduates are welcome to apply. Training will be provided.
• Proficiency with AutoCAD

Summary of Job Scope:

Assist production HOD to ensure that BMR and NAV closure and updating is online and real time.

• Ensure on time closure of BMR

• Ensure that all NAV entry at each stages is on time

• Preparation and submission of daily production reports

Assist production HOD to control processes and manpower

• Ensure GMP is adhere in production

• Ensure all processes are in order and following BMR

• Ensure on- time filling and closure of any deviation or IPIR; and issue investigation

• Ensure all manpower are trained properly

NTi Technology is a subsidiary of NTi Memtech Pte Ltd. We are a technology company specializing in membrane material research and development, membrane product manufacturing, membrane technology applications and services. NTi has its own fully equipped membrane R&D center and manufacturing base in Singapore to produce high-performance hollow fiber membranes.

Currently, we are looking for engineering, science, business and manufacturing interns with interests in membrane marketing, research, product development, and production.

We Offer:

• Hands-on experience in a full-scale membrane manufacturing facility, from research to production to delivery.
• Mentorship and training from experienced professionals in the field.
• Exposure to industry-standard practices and technologies.
• A supportive and collaborative work environment.

1. Membrane Production Intern

We are seeking a motivated and detail-oriented Production Intern to join our team for a 6-month internship. This position is designed for a diploma student looking to gain practical experience in a dynamic manufacturing environment. As an intern, you will work closely with our production team, contributing to various stages of the membrane manufacturing process while learning industry best practices.

Responsibilities and Duties:

• Assist in day-to-day production operations of polymeric membranes.
• Support the setup and calibration of production equipment.
• Monitor production processes to ensure quality and efficiency.
• Collect and analyze production data, reporting any deviations or issues.
• Assist in quality control checks and testing of finished products.
• Participate in continuous improvement initiatives to optimize manufacturing processes.
• Ensure compliance with safety protocols and manufacturing standards.
• Collaborate with the production team on troubleshooting and resolving operational challenges.
• Draft standard operating procedures, including risk assessments of tasks, and safe work flows.

Requirements:

• Currently pursuing a diploma in manufacturing or production, or chemical engineering.
• Basic understanding of industrial manufacturing processes.
• Strong attention to detail and a proactive approach to problem-solving.
• Ability to work effectively in a team environment.
• Eagerness to learn and adapt to new technologies and methods.
• Strong communication skills and the ability to follow instructions.

Abbott is a global healthcare leader, creating breakthrough science to improve people’s health. We’re always looking towards the future, anticipating changes in medical science and technology.

Primary Function:

• Ensure the execution of the capital project on processes, equipment, plant facilities are compliance with the Safety and GMP policies, procedures, standards, and statutory requirement
• Deliver projects independently on time, on budget and in scope.
• Manage project capital and expense cash flow budgets.
• Manage project cost status-raise Purchase Orders, process invoices on a timely manner
• Provide timely project status review
• Manage key portfolios in Project Management Office such as Capital Planning, Site Master Planning, Shutdown Planning, Drawings Management and Metrics Reporting.

Major Responsibilities:

• Implement plant continuous improvement projects and cost saving efforts.
• Lead and implement workflow streamlining projects in the company.
• Manage reward and recognition and employee engagement programs in the organization.
• Perform data analysis on production data and identify opportunity for improvement.
• Manage various improvement programs and workstreams in the plant, track and report benefits of projects.
• Drive continuous improvement culture and mindset in the organization.
• Any other duties as assigned by supervisor.

Requirements:

• Bachelor Degree in Chemical/Mechanical/Electrical or in related discipline
• Ideally 6-8 years’ experience in project management or manufacturing operations in manufacturing industry.
• Experienced in project management and leading cross functional teams.
• Conceptual understanding on Lean Six Sigma principles and Focused Problem Solving skills.
• Strong communication skills, interpersonal skills and negotiation skills.
• Proficient in statistical analysis, process mapping, graphic design skills will be an advantage.
• Knowledge in Project management skills.
• Able to react efficiently to situation and able to work independently.

*Kindly note this position is based in Tuas.

Follow your career aspirations to Abbott for diverse opportunities with a company that can help you build your future and live your best life. Abbott is an Equal Opportunity Employer, committed to employee diversity.

Administered by the Workforce Advancement Federation (WAF), the Career Conversion Programme (CCP) for Biomedical Manufacturing Executives is a premier talent development initiative designed to cultivate the next generation of skilled professionals for Singapore’s Biomedical manufacturing industry. This comprehensive 15-month programme features structured on-the-job training (OJT) provided at Novartis Singapore Pharmaceutical Manufacturing Pte Ltd (NSPM), facilitating the practical application of acquired knowledge and ensuring participants develop the essential competencies required for their roles.

Eligilibity for CCP:

• Singapore Citizen or Permanent Resident;

• Minimum 21 years old;

• Mid-Career Individual: Graduated, or completed National Service, whichever is later, for at least 2 years* prior at the point of application; or

• Fresh Graduate: Graduated, or completed National Service, whichever is later;

• Not in a similar job function prior to joining Career Conversion Programme (CCP);

• Have not attended the same programme – Career Conversion Programme (CCP) for Biomedical Manufacturing Executives / Professionals (Train-and-Place with Commitment to hire) – previously;

• Have not been funded under the same programme – Career Conversion Programme (CCP) for Biomedical Manufacturing Executives / Professionals (Train-and-Place with Commitment to hire) – previously.

• Should not be shareholders, immediate ex-employees of Novartis, or be related to shareholders of Novartis.

Successful candidates must be able to commence the program by March 2025.

Job Purpose

Support all activities in maintaining a QC IPCDS lab in BioPharmOps QC. Testing of in-process control & drug substance samples, to support production needs and document in accordance with written testing SOP’s and in accordance with local/ international regulations.

Key Responsibilities

• Maintain QC IPCDS laboratory in full cGMP-compliance.

• Track and execute individual training requirements to ensure completion on time including new methods and instrumentation.

• Ensure laboratory operations are in accordance to cGMP standards

• Perform raw material testing in accordance current testing monographs/SOPs and in accordance with local/ international regulations.

• Ensures that testing completed in a timely manner based on plan.

• Support laboratory routine operations such as inventory management and house-keepings.

• Support the optimization of work flows in the QC IPCDS Laboratory.

Requirements

• Minimum Diploma with 4 to 5 years relevant working experience in GMP-regulated industries in Quality Control. Fresh graduates are welcome to apply.

• New entrants to biopharmaceutical industry and should not be holding a bond obligation with any organisation

• Background knowledge on analysis such as HPLC, UV Spectrophotometer, pH/Conductivity meter, Total Organic Carbon (TOC),

• Preferrably a working knowledge of FDA and ex-USA regulatory requirements as well as industry quality management tools, standard, and quality systems.

Administered by the Workforce Advancement Federation (WAF), the Career Conversion Programme (CCP) for Biomedical Manufacturing Executives is a premier talent development initiative designed to cultivate the next generation of skilled professionals for Singapore’s Biomedical manufacturing industry. This comprehensive 15-month programme features structured on-the-job training (OJT) provided at Novartis Singapore Pharmaceutical Manufacturing Pte Ltd (NSPM), facilitating the practical application of acquired knowledge and ensuring participants develop the essential competencies required for their roles.

Eligilibity for CCP:

• Singapore Citizen or Permanent Resident;

• Minimum 21 years old;

• Mid-Career Individual: Graduated, or completed National Service, whichever is later, for at least 2 years* prior at the point of application; or

• Fresh Graduate: Graduated, or completed National Service, whichever is later;

• Not in a similar job function prior to joining Career Conversion Programme (CCP);

• Have not attended the same programme – Career Conversion Programme (CCP) for Biomedical Manufacturing Executives / Professionals (Train-and-Place with Commitment to hire) – previously;

• Have not been funded under the same programme – Career Conversion Programme (CCP) for Biomedical Manufacturing Executives / Professionals (Train-and-Place with Commitment to hire) – previously.

• Should not be shareholders, immediate ex-employees of Novartis, or be related to shareholders of Novartis.

Successful candidates must be able to commence the program by March 2025.

Job Purpose

Support all activities in maintaining a QC Raw Materials release lab in BioPharmOps QC. Testing of incoming raw materials and consumables, to support production needs and document in accordance with written testing SOP’s and in accordance with local/ international regulations.

Key Responsibilities

• Maintain QC Raw Materials laboratory in full cGMP-compliance.

• Track and execute individual training requirements to ensure completion on time including new methods and instrumentation.

• Ensure laboratory operations are in accordance to cGMP standards

• Perform raw material testing in accordance current testing monographs and in accordance with local/ international regulations as such as United States Pharmacopoeia (USP), European Pharmacopoeia (EP), American Chemical Society (ACS) and/ or Internal Validated Methods.

• Ensures that testing completed in a timely manner based on plan.

• Support laboratory routine operations such as inventory management and house-keepings.

• Support the optimization of work flows in the QC Raw Material Laboratory.

Requirements

• Minimum Diploma with 4 to 5 years relevant working experience in GMP-regulated industries in Quality Control. Fresh graduates are welcome to apply.

• New entrants to biopharmaceutical industry and should not be holding a bond obligation with any organisation

• Background knowledge on analysis of USP and EP pharmacopeia methods in GMP-regulated industries in Quality Control Raw Materials laboratory.

• Preferably a working knowledge of FDA and ex-USA regulatory requirements as well as industry quality management tools, standard, and quality systems.

Responsibilities:

• Oversee inventory to meet production demands and avoid shortages.
• Collaborate with internal teams and suppliers to ensure timely material delivery.
• Adjust production schedules as necessary to meet deadlines.
• Ensure product quality by working closely with the testing team.
• Schedule production staff according to workload requirements.
• Utilize ERP/MRP systems for streamlined planning and scheduling.
• Supervise production staff for effective task completion as required.

Requirements :

• Diploma in Manufacturing Engineering or equivalent.
• At least 1 year of working experience in electronics manufacturing.
• Experienced in material planning, inventory management, and proficient in ERP and MRP systems.
• Possess leadership and supervisory skills.

_________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

HOW MIGHT YOU DEFY IMAGINATION?

Amgen is one of the world’s leading independent biotechnology companies. For over 4 decades, Amgen has pioneered biotechnology breakthroughs, to bring state-of-the-art medicines from laboratory to the patient. Amgen has not only discovered and developed innovative human therapeutics, but has invested in cutting edge manufacturing capability and support services to deliver these exciting therapies to medical teams around the world. Japan and Asia Pacific (JAPAC) is the fastest growing region in Amgen. Now we are hiring an Senior Manager (Process Development) in Singapore.

Senior Manager (Process Development)

What you will do

The successful candidate will apply subject matter expertise to support technology transfer and ongoing cGMP production of commercial protein biologics processes. Scope of work could include:

• Lead site PD activities for continuous improvement, productivity improvement, and product life cycle management.

• Lead and manage PD safety and compliance initiatives including inspection readiness.

• Manage and oversee PD related projects, ensuring they are completed on time, within scope, and budget. Analyze project outcomes to identify areas for improvement and drive continuous optimization.

• Represent PD on key projects or business processes.Stay abreast of industry trends and leverage expertise to ensure the success of the Amgen Singapore Site, focusing on reliability, efficiency, agility, and differentiation.

• Collaborate with cross-functional teams and network drug substance teams for process alignment by applying advanced technical principles and concepts.

• Site PD champion for digital literacy and new digital tools deployment for process monitoring, tech transfer, and facility modeling. Apply best practices to leverage data for more proactive and predictive approaches.

• Support regulatory filings, audits and inspections, and other CMC activities.

Win

What we expect of you

Basic Qualifications

· Doctorate Degree and 2 years of biologics process development or commercial-scale technical support experience Or

· Master’s Degree and 6 years of biologics process development or commercial-scale technical support experience Or

· Bachelor’s Degree and 8 years of biologics process development or commercial-scale technical support experience

Preferred Qualifications

· 6+ years in a technical role supporting manufacturing processes or 8+ years as a project manager for cross-functional teams within regulated environments (i.e., cGMP)

· Strong oral and verbal communication skills, interact effectively with diverse internal and external (suppliers) stakeholders.

· Knowledgeable in regulatory filings authoring and inspections. Experienced in biopharma product end to end lifecycle management (e.g product team lead).

· Familiarity in MoF single use facility operational aspects of commercial biopharma manufacturing and proficient in big data analysis.

· Working experience with capital / engineering project from early stage to project turnover.

· Stakeholder Communication: Maintain clear and effective communication with all project stakeholders in multicultural working environment, including providing regular updates and managing expectations.

· Agility and Learning: Promote a culture of agility and learning within project teams, encouraging innovation and adaptability in a dynamic business environment.

Thrive

What you can expect of us

As we work to develop treatments that take care of others, so we work to care for our teammates’ professional and personal growth and well-being.

• Vast opportunities to learn and move up and across our global organization
• Diverse and inclusive community of belonging, where teammates are empowered to bring ideas to the table and act
• Generous Total Rewards Plan comprising health, finance and wealth, work/life balance, and career benefits

Apply now

for a career that defies imagination

In our quest to serve patients above all else, Amgen is the first to imagine, and the last to doubt. Join us.

careers.amgen.com

Equal Opportunity Statement

Amgen is an Equal Opportunity employer and will consider you without regard to your race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status.

We will ensure that individuals with disabilities are provided a reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request an accommodation.

Overall supervision of production personnel & production procedures

Job Objective

• To ensure that each department operates smoothly during office hours / OT.
• To ensure that better quality of products are produced.
• To ensure that all production personnel operates according to current Good Manufacturing
• Practice (cGMP) standards.

Responsibility

• Responsible for checking the quality of all the products manufactured.
• Recognize the importance of production process control.
• Report immediately to HOD and relevant personnel of any technical and disciplinary problems encountered during production.
• Seek approval from HOD before troubleshooting.
• In-charge of safekeeping of keys to main gate and ensuring that the gate is always locked after office hours.
• In-charge of the keys to the raw materials room and intermediate room when the Controller is absent.
• To check that the production procedure is followed and report any deviation from standard practice stated in the BMR.
• Report any non-compliant behavior according to GMP standards.
• Be well-trained in GMP standards.
• Provide suggestions for improvement of production work flow and its control.
• Willingness to learn all the production processes and operation and control of each piece of equipment.
• Perform the required administrative duties such as submitting the daily report, monitor the flow of BMR.
• Train new or existing production personnel according to training schedules from HOD.
• Assist the HOD with the production work flow.
• Duties as and when assigned by the Company.

Duties and Responsibilities

• Establish R&D procedures and work processes.
• Development of new and/or improved product formulation to meet pharmacopeia requirements.
• Development of suitable manufacturing process for the product formulation.
• Produces sample batch in lab scale and pilot scale.
• Responsible for effective technology transfer and upscaling to commercial scale batches.
• Participates in process validation for the R&D batches.
• Provides training to production personnel on improved formulation and manufacturing processes.
• Ensures suitable test method is developed and validated for the new/improved products.
• Trouble-shooting in the areas of formulation and process for routine production.
• Participation in the investigation of product complaints (if applicable).
• Monitors the progress of stability study for R&D samples.
• Establishment of technical information e.g. specifications of raw material, packaging materials, finished products.
• Provides documentation to support registration of products with regulatory authority.
• To ensure the quality of product is in accordance with the specification.
• To review and feedback if there is any improvement needed for the process of manufacturing.
• To ensure that products are produced, stored according to the appropriate documentation and monitor storage conditions for materials and product in order to obtain or maintain the required quality.
• To inspect, investigate and take samples in order to monitor factors which may affect product quality.
• To ensure all products, in process materials, production facilities and process are in accordance to codes of Good Manufacturing Practice (GMP) requirement through proper monitoring procedures, effective training program and up to date documentations.
• To monitor drugs manufacturing activities and ensure company is always in compliance with the latest PICS & GMP guideline.
• To ensure that company is always updated with the latest guideline required.
• Review and make recommendation for improvement in area of manufacturing processes, safety, environment, sanitation and hygiene.
• To approve the instruction relating to production operations and to ensure their strict implementation.
• To ensure the qualification and maintenance of his department, premises and equipment.
• To ensure that the appropriate validations are conducted timely and accordingly.
• To ensure all GMP quality related record are kept properly

Requirement

• Bachelor Degree/Master in Pharmacy/Pharmaceutical Sciences
• Minimum 2 - 5 years’ experience in pharmaceutical industry
• Minimum 2 years’ experience in drug development and formulation as well as manufacturing process/technologies

At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you’ll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients and customers. We foster an inclusive culture and are looking for diverse, talented people to join Alcon.

As a Assistant Microbiology, you will be responsible for overseeing routine testing for the Microbiology lab to support our manufacturing production.

In this role, a typical day will include:

· Perform routine/non-routine microbiology testing as per plan. Test includes Bioburden for product (contact lens) samples, water samples, in process samples, and environmental monitoring, growth promotion test, plate reading.

· Support analysis and report micro testing result and trend. Provide timely feedback to area owner if abnormality observed. Perform periodical evaluation on Micro related program (e.g. Environmental Monitoring, utilities monitoring and product/raw material monitoring.

· Support investigation for any Microbiology Out-Of-Specification (OOS) excursion.

· Revise SOP/forms when necessary

· Responsible for ensuring a safe work environment and compliance to all applicable laws and regulations

· Support implementation of assigned projects and HSE related activities

· Performs any other duties as assigned by Supervisor according to business needs

WHAT YOU’LL BRING TO ALCON:

· Diploma in Microbiology, Medical science or related field with 1-2 years of relevant experience in microbiology lab

· Office hours

HOW YOU CAN THRIVE AT ALCON:

· Good team player

· Enjoy working with various cross functional team across manufacturing site

Alcon Careers

See your impact at alcon.com/careers

Our Production Technicians operate our chemical processes and perform production related activities, utilizing their chemical manufacturing knowledge and experience to operate and troubleshoot the plant in a safe and efficient manner. The Production Technician works in a team environment where collaboration and teamwork are critical to meeting the goals of the business.

Production Technicians are required to work shift work including nights, weekends, and holidays.

Job Responsibilities include but are not limited to:
- Safely and efficiently operates their assigned processes to meet the day-to-day quality, production and productivity goals of ALAM.
- Effectively prioritizes their daily tasks working with the Production Leads and Production Supervisors.
- Participate in monthly safety meetings and promote a safe work environment
- Actively participate on ALAM’s emergency response (ER) team and ER entry team
- Reviews and updates the Standard Operating Procedures
- Reviews and updates the Learning Resources for the processes
- Completes annual personal goals to achieve the plant goals and their own personal development goals
- Assembles and disassembles production equipment
- Performs basic maintenance on equipment
- Drives a culture of "Do It Safe, Do It Right the First Time" with their actions and their words on a daily basis
- Successfully complete all assigned training
- Cross-trains peers on approved functions
- Ability to roll cylinders- Rolling cylinders requires an individual to tilt a cylinder slightly with one hand, and use the other hand to move the cylinder forward by rolling it
- Fitness for duty, including but not limited to: ability to lift 50 pounds and have the ability to climb ladders
- Actively participate on ALAM’s emergency response (ER) team including as an ER entry team member, which requires wearing a tight fitting full-face respirator

The Senior QA Lead will oversee the activity of the quality assurance department and staff, developing, implementing and maintaining a system of quality and reliability testing for the organisation’s product and development processes.

Responsibilities

• Oversees the daily workflow and schedules of the department
• Develops, implements and manages processes to ensure that products meet required specifications for quality prior to delivery.
• Communicates quality standards and parameters to QA and Production team.
• Identify and analyses issues, defects and other problems, particularly when problem recur in multiple products; recommend and facilitates solution to these issues
• Review client, customer and user feedback
• Conduct internal reviews and audits based on QMS ISO 9001
• Prepare First-Article reports
• Participate in ISO 9001 internal annual audit
• Perform other ad-hoc duties as assigned by the management team

Requirements

• Excellent verbal and written communication skills
• Good interpersonal and customer service skills
• Attention to details with strong analytical and problem-solving skills
• Proficient with Microsoft Office Suite
• 3 to 5 years of experience in related field with supervisory experience a plus

Education Qualification

Bachelor's Degree or diploma

Working Location: Tuas Link 1

Working Hours: Monday to Friday, 8.30am to 6pm