Rapsodo Inc. is a sports analytics company that uses computer vision and machine learning to help all athletes maximize their performance. Our proprietary technology applications range from helping PGA Tour golfers optimize their launch conditions to allowing MLB pitchers to increase the efficiency of their breaking balls. Current partners include all 30 MLB teams, MLB, USA Baseball, Golf Digest, PGA of America, and over 1000 NCAA athletic departments.

New Product Introduction (NPI) is the end-to-end process of bringing a new product to the market from design concept to the end customer. It broadly encompasses the following stages of the engineering team: Lab Prototypes (LP), Production Prototypes (PP) & Production Ramp (PR).

As an NPI Engineering Intern at Rapsodo, you will be exposed to the different stages of NPI for Rapsodo’s upcoming products to be released. You will also be exposed to the manufacturing environment of how our products are built and supported by our Research & Development (R&D) Team.

Roles & Responsibilities

• Gain invaluable exposure into Singapore’s Technology Sector

• Be exposed to the different stages of the NPI process for Rapsodo’s upcoming products

• Assist with building prototypes

• Provide feedback for the prototypes you build

• Be involved in investigative study with our R&D Team

• Be exposed to working with our Software Test Team, Purchasing Team as well as Manufacturing Team

• Pursuing Diploma in Electrical, Mechanical Engineering or any related Engineering discipline

• Responsible, hardworking and a team player

• Good attitude to learn and contribute to the team

• Pro-active, organized & meticulous and able to work independently in a fast-paced environment

• Have strong analytical, problem solving and inter-personal skills

• Excellent written and oral communication skills with the ability to present ideas and results to technical and non-technical audiences

• can work on publick holidays
• can work on shifts/change of shifts
• can work and stand for long hours
• at least 10 years experiences
• have relavant certificates/diploma
• hardworking and keen
• 
  
• Provide overall supervision of production activities.
• Plan, organize and lead a team of production workers to achieve production target and output, cycle time, and yield.
• Improvement in maintaining product quality and productivity. Provide a guideline to check on processes thereby assuring that work is done by the operators.
• Monitor the daily efficiency status of the line.
• Ensure good housekeeping and safety at the workplace.
• Oversee hiring and training of food production personnel
• Perform other duties as assigned.

Our client is a Manufacturing MNC. Due to business needs, they are now recruiting a to be part of their Procurement Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of Buyer:

• Analyze sales and purchasing data to identify market trends and support decision-making.
• Conduct cost analysis to assess total costs and identify cost-saving opportunities.
• Source and evaluate suppliers, contractors, and value-added services for projects.
• Collaborate with sales and customer service to manage subcontractors and place orders.
• Maintain material master data, including creating part numbers and Bill of Materials (BoM) items.
• Negotiate pricing and terms with suppliers to secure optimal deals.
• Monitor and adjust order schedules to meet delivery requirements.
• Address product quality issues, short-shipment claims, and replacements with suppliers.
• Plan and propose buffer stocks to meet project demands and ensure supply consistency.
• Perform demand planning and forecasting for projects and recurring business.
• Identify and implement process improvements within procurement operations.
• Handle other duties as assigned.

Requirements:

• Diploma in related field
• Relevant experience
• Well versed with SAP

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Job Description & Requirements

• Conducting machine safety checks each day
• Setting up cranes and operating them
• Moving material around site according to a plan or schedule
• Monitoring crane stability and load weights
• Working with a banksman to ensure site safety
• Making minor repairs to machinery
• Reporting any issues to the supervisor
• Keeping records of the materials you’ve moved
• Ensuring that travel routes are clear
• Working on-site, in noisy conditions.
• Must be trained in the following crane certification recognized by local regulatory (Crawler crane)
• Previous experience as a crawler crane operator would be preferrable.
• Ability to lift heavy loads, work in heights
• Able to interpret general lifting plan
• Able to work at heights and under outdoor conditions.

First preference for night shift work

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

• Conducting machine safety checks each day
• Setting up cranes and operating them
• Moving material around site according to a plan or schedule
• Monitoring crane stability and load weights
• Working with a banksman to ensure site safety
• Making minor repairs to machinery
• Reporting any issues to the supervisor
• Keeping records of the materials you’ve moved
• Ensuring that travel routes are clear
• Working on-site, in noisy conditions.
• Must be trained in the following crane certification recognized by local regulatory (Crawler crane)
• Previous experience as a trench cutter operator would be preferrable.
• Ability to lift heavy loads, work in heights
• Able to interpret general lifting plan
• Able to work at heights and under outdoor conditions.
• First preference for night shift work

• Conducting machine safety checks each day
• Setting up cranes and operating them
• Moving material around site according to a plan or schedule
• Monitoring crane stability and load weights
• Working with a banksman to ensure site safety
• Making minor repairs to machinery
• Reporting any issues to the supervisor
• Keeping records of the materials you’ve moved
• Ensuring that travel routes are clear
• Working on-site, in noisy conditions.
• Must be trained in the following trench cutter recognized by local regulatory
• Previous experience as a trench cutter operator would be preferrable.
• Ability to lift heavy loads, work in heights
• Able to interpret general lifting plan
• Able to work at heights and under outdoor conditions.
• First preference for night shift work

Basic Expectations for this position

• Proficient in all aspects of plant biotech laboratory procedure including ability to modify and adapt protocols to develop gene editing and transformation pipelines.
• Manage concurrent tasks in various stages of completion
• Provide assistance and back-up as needed to other research team members, including collecting and prepping large numbers of samples for sequencing
• Maintains an accurate and up-to-date laboratory notebook or tracks work as required by the project or supervisor
• Assists with general lab maintenance such as cleaning freezers, shared lab space and equipment, and ordering and stocking shared reagents and consumables
• Other duties as assigned

Requirements

• Minimally a degree in plant biotechnology/ Biomedical Science or proven proficiency in plant biotechnology or related degreeMeticulous attention to detail, both in actual laboratory practice and in documentation
• Excellent general molecular biology laboratory skills, including proficiency in pipetting, documentation, and procedure
• Ability to accurately convert measurements and prepare chemical solutions and buffers as required
• Ability to understand protocols, modify and clarify them, and perform protocols with consistency, as demonstrated through previous laboratory experience
• Experience with high throughput molecular biology techniques and the ability to operate specialized and general equipment (biolistic particle delivery systems, fluorescent microscopes PCR and q-PCR machines, gel electrophoresis, tabletop centrifuge).

If you are interested in any of the positions, do kindly drop your most updated resume to [email protected]

Esther Lim Suk Hui

EA Personnel No: R1872808

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

Requirements:

-Minimum 3 years of expereince as a machine operator in a printing company/factory

-Knows how to operate printing machine

Job Description & Requirements

1. Formulate and provide directives for Production Department in meeting organization's goals and committed to Quality Management System.
2. Accountable with the assigned factory sections in terms of production, New Model Development, Customer Service and Support, Supplier and Materials Management, Logistics and Transportation.
3. Analyze section profit/loss of projects and providing cost control and cost effectiveness strategy.
4. Provide production & material planning in ensuring production efficiency and on time delivery.
5. Ensure effective control of machine up/down time and well scheduled and optimized planning in machine / work-center load.
6. Manpower balancing and deplaoyment strategy with manpower skill set.
7. Continuous improvement program to ensure productivity, cost and quality effectiveness, general housekeeping and safety.
8. Formulate, identify and conduct management / training workshop to initiate / facilitate staff in aligning organizations missions and objectives and actions plans.
9. Support other function activities within the company to achieve the overall business goals and objectives.
10. Implement process improvement.
11. Authorize the appropriate use of performance monitoring and statistical techniques.
12. Ensure and coordinate the implementation of risk assessment and risk contol of medical devices.

Requirements:

• Preferred to have Diploma / Degree in Mechanical / Precision Engineering or equivalent.
• Minimum 6 years in a Manufacturing environment (preferably in Precision Engrg / Sheet metal industry) and with at least 4 years of supervisory capacity.
• Exposure with involvement in newly factory, product / process set-up is much preferred.
• In-depth understanding of manufacturing cycle and good budgeting control.
• Strong leadership with good analytical and problem solving skill, as well as dynamic in planning and result oriented.

Authorities and Responsibilities

1. Assembly of higher end products which require self-interpretation and understanding of technical drawing, assembly requirements, which also includes Geometric Dimensioning and Tolerance
2. Electrical wiring and soldering for installation and assembling of mechanical and sub-assembly level components.
3. Troubleshooting of machinery, servicing and maintenance.
4. Perform testing and commissioning of machines and testers.
5. Providing smooth and continuous running and support on machines and projects.
6. To provide rework or make call for the required rework processes.
7. Providing guidance to the team of operators.

Competence Requirements

• Preferred to have Secondary / NTC / Diploma in engineering field or equivalent.
• Fresh NTC / Diploma holder may be considered, else others with minimum 3 years of related work experience in manufacturing environment.
• Able to read and interpret technical drawing.

Job Responsibilities

• Develop, implement, and maintain efficient and controlled processes for the fabrication of parts, components, sub-assemblies, and final assemblies, ensuring adherence to cleanroom manufacturing standards (end-to-end process and including leak check/functional test)
• Collaborate with cross-functional engineering teams to facilitate the release and improvement of existing and new products, managing engineering change requests (ECRs) as needed to support design, quality, and operations.
• Estimate manufacturing work definition, cycle time standards, and provide recommendations for tooling, process improvements, and quality assurance to optimize product quality and production efficiency.
• Design and employ robust test procedures and scripts, working closely with design and software engineering teams to define testing specifications and develop test fixtures for cleanroom and non-cleanroom environments.
• Collect and evaluate operational and test data, conducting analysis to support corrective and continuous improvement initiatives, and actively lead and participate in Engineering Continuous Improvement reviews.
• Assess and refine work methods, processes, and procedures to ensure alignment with cleanroom protocols, documenting current practices, and maintaining a knowledge base for new and transferred products.
• Conduct root cause analysis for assembly and testing issues, prepare failure analysis reports, and implement corrective actions to mitigate reoccurrence.
• Perform Process Failure Mode and Effects Analysis (PFMEA) as part of new product development processes, focusing on the cleanroom environment's unique challenges.

Job Requirements

• Minimum Degree in Mechanical Engineering (ME) or Electrical and Electronics Engineering (EEE).or related field.
• Possess at least 1 year of experience as a Manufacturing Engineer in semiconductor, electronics, or engineering industries, with a preference for cleanroom manufacturing experience.
• Proficiency in Microsoft Excel, PowerPoint, VBA, Power Apps, Power BI; Design software experience with AutoCAD, SketchUp Pro, and Inventor for tooling and fixture development.
• Familiarity with software programming languages, including Python, VBA, LabVIEW, and C++ for developing test scripts and automation.
• Added advantage for candidates with a background or knowledge in Industrial Engineering (IE) to optimize process efficiency and productivity.
• Effective communication skills to interact with stakeholders at all levels globally and the flexibility to participate in meetings across various time zones.
• Willingness to work in a Class 100 ISO 5 Cleanroom Environment.

Job Responsibilities

• Generate data from server, identify printing requirements and send data for printing
• Operate printing and/ or enveloping machine to print and/ or pack the printed documents
• Ensure data are print in accordance with the job order instructions and requirements
• Handle and/ or pack the printed documents in accordance with the job order requirement
• Perform quality checks on the printed and/ or packed documents
• Identify and sort defect documents/ products in proper manner
• Ensure the printed/ packed documents are ready for delivery
• Comply with the Company’s Workplace Safety and Health (WSH) requirement, guidelines, and relevant codes of practices.
• Involve in daily 5s activities in workplace
• Other ad-hoc duties as assigned by Supervisor

Job Requirement

• At least 1 year working experience in manufacturing working environment
• Candidates without relevant experience may be considered based on merit
• Basic computer skill, able to read and understand simple English
• Physically fit, able to carry heavy loads of 10kg - 20kg
• Good attitude, willing to learn and able to follow instructions
• Able to work in rotating shift (Day, afternoon or night shift)

Production Engineer

• Working hours: 5 Days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong
• East MRT)
• Salary Range: $4500 - $6000

Position Summary:
The Production Engineer is responsible for improving the production technology of the EVAL site which will be launched in second half of 2026. The Production Engineer supports the production team for identifying, investigating, and resolving production issues in technical aspects. The Production Engineer leads technology for process control (DCS, SIS), operation condition, and product quality improvement and joins project work related to production technology development and improvement. Until the startup of EVAL production line, training and learning opportunities of EVAL production technology is provided by experienced members in Company. The Production Engineer will be a member of the commissioning and startup team of new EVAL plant and is responsible for designing and optimizing the process condition and process control system (DCS) and supports other production team members to achieve safe and stable commissioning and startup of new EVAL plant.

Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Minimum Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in Chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Preferred Requirements:

• Master’s degree in chemical engineering
• Knowledge and experience in chemical process simulations (e.g. polymerization, other reaction process, distillation, drying, and so on)
• Technical understanding of polymer extrusion process
• Knowledge of DCS programming and parameter tuning (PID control)
• Experience in lean manufacturing methods (e.g. 5S, Six Sigma, Kaizen, TPM)
• High proficiency in Excel including VBA, macros, or other related software engineering tools.
• Experience with leading Capex projects
• Experience with Management of Change (MOC), Process safety assessment (PHA, HAZOP, LOPA, FMEA, QRA, etc.), and Root Cause Analysis (RCA).

Karen Lee Kai En Reg No: R22108159

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Production Engineer

Salary Range: $4500 - $6000

Working Hours: Mon to Fri (8 am to 4.30pm)

Working Location: Jurong Island (Company transport provided near Jurong East MRT)

Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Minimum Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in Chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Work includes:

• meeting with clients virtually or during sales visits
• demonstrating and presenting products
• establishing new business
• maintaining accurate records
• attending trade exhibitions, conferences and meetings
• reviewing sales performance
• negotiating contracts and packages
• working towards monthly or annual targets.

Key skills for sales supervisor

• Self-motivated and driven by targets
• Resilience
• Strong communication skills – including both verbal and written
• The ability to influence and negotiate with others
• Commercial awareness

Job Description & Requirements:

• Develop detailed manufacturing processes, including assembly procedures, testing protocols, and quality control checks.
• Create efficient process flows to minimize waste and maximize productivity.
• Continuously analyse and improve existing processes to reduce costs, increase yield, and enhance quality.
• Design and procure necessary manufacturing equipment and tooling.
• Determine the required production capacity and allocate resources accordingly.
• Plan and design the manufacturing facility layout for optimal workflow and efficiency.
• Oversee pilot production runs to identify and address potential issues.
• Validate processes to ensure they meet product specifications and quality standards.
• Implement quality control measures to ensure product consistency.
• Drive continuous improvement initiatives to enhance product quality and process efficiency.
• Investigate and resolve quality issues.

Requirements:

• Degree / Diploma in Mechanical/Electrical/Mechatronics
• 1-4 years of relevant experience preferably in Assembly of Equipment or Test area preferably in Semiconductor Industry
• Experience in maintaining the Quality of Work
• Knowledge of Material BOM’s
• Capable of understanding Engineering drawings for Mechatronics-assembly
• Experienced in Manufacturing Engineering Tools (5S, Process Flow, FMEA, System Risk Analysis, DMAIC, 8D, Control Plan, SOP, SOO, Work Instructions, Root Cause Analysis, Capacity versus Demand)
• Experience in Mechanical Fitting, Cable Routing and Installation of Equipment. Preferably in a Semiconductor Equipment Industry.
• Able to use Solid works to design simple fixtures / jigs
• Technical skills must include basic knowledge of mechanical/Electrical/Mechatronics
• Ability to work independently with minimal supervision

Overall Job Purpose

To perform single or multiple specific tasks in developing and maintaining a cost control plan for a designated section of assigned project(s) or less complex assignments, and prepare relevant reporting and analysis to effectively and efficiently communicate project cost status at regular intervals.

Responsibilities:

• Collate and compile independently the necessary information to support timely cost data consolidation, analysis and reporting.
• Understand the requirements of the approved cost control procedures and ensure proper implementation in the course of work.
• Develop and maintain detailed cost control plans using Company tools and best industry practices.
• Set-up Cost Breakdown Structure and allocate budget, resources, and any other data required into the system.
• Derive and consolidate the commitments and actual costs for one or more portions of the scope of work.
• Review, analyze and update accurate forecasts for one or more portions of the scope work by using best industry practices.
• Track budget variances and challenge budget owners on any deviation from approved cost baseline.
• Generate and distribute internal cost report for part or the entire scope of work on a regular basis and as per Company standards.
• Reconcile project cost reporting with accounting and financial records.
• Review subcontractors’ invoices for accuracy and completeness and ensure that costs are allocated with the correct coding.
• Review Change Order requests and/or potential variations that impact project budget and forecasts, and maintain appropriate register.
• Establish appropriate coordination with other project functions to ensure compatibility with the Cost Control requirements and timely flow of the information.
• Contribute and participate to the Project Risk Management process by providing cost input and identifying potential budget and forecast impacts for risks’ occurrences.
• Perform cost risk analysis to define accurate contingency reserve by using company tools and best industry practices.
• Provide guidance and support to less experienced cost control staff as required.

Requirements/Qualification:

• Degree in Engineering, Science, Business Management, or Operations Management.
• AACE certification (CCT or CCP) preferred.
• 8 years of cost engineering experience in Oil & Gas industry or 12 years of cost engineering experience in other industries with understanding of technical knowledge of Oil & Gas process and FPSO projects.
• Previous working experience in a senior role is preferred.
• Experience with SAP (preferred) or different ERP system.

Salary: $12/h

Duration: Immedeately - end march 2025 (possible conversion to permernant role after)

Location: Jurong

Working Hours: Monday to Friday: 9:00am to 6:00pm

Need to work overtime on Saturday: 8:00am to 2:00pm (OT pay applies)

Responsibilities include:

• Shipping Documentation – Prepare and manage large volume of shipping documentations (Invoice, Packing List, Delivery Orders and Airway Bill) by stipulated daily schedules to facilitate outbound shipment delivery to customers
• Document Control and Accuracy – Ensure all shipping documents are accurate, complete and comply with industry regulations and Company standards
• Logistics Coordination – Coordinate import shipment documentations with forwarders for timely transportation to Warehouse
• Communication – Act as the main point of contact with regards to any shipping enquiries and work closely with internal and external stakeholders to ensure smooth flow of daily operations
• Reporting – Perform operation management reports

Requirements:

• Minimum A levels/diploma

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Job Scope:

• Build six sigma and lean capability of colleagues through training and coaching (including IMEx orientation, IMEx elements, Innovation, process capability, M1 training and certification, 5S etc.)
• Support site opex lead in goal setting, goals cascade and performance reviews
• Continuously deliver measured improvement in performance in all aspects of business for all the IMEX Ecosystem(s)
• Lead Six Sigma and Lean projects that are aligned with the site's short term and long-term goals Provide leadership & guidance to Green Belts (Method 2) and Yellow Belts (Method 1)
• Promote Good Practices and sharing knowledge across the site through community of practice and within the network
• Own the CI element and work with site leadership team to ensure a consistent and impactful application of CI loop site-wide
• Own, maintain and promote CI reporting and tracking portal
• Promote CI culture through reward and recognition
• Develop courses of action and drive implementation of solutions
• Uphold code of conduct and values
• Play an active and impactful role to deliver flawless execution in the Business Excellence, Process
• Centric Team (PCT) by updating performance against metrics, highlighting & resolving issues, with appropriate escalations

Requirement:

• 3 -5 years Experience in Pharma/Chemical/Medical Device Industry
• Min Bachelors in Engineering or equivalent

TELE me at @yijingggggg or WA me at https://wa.me/+6598623556 NOW!
Interested candidates, please submit your resume to [email protected]

Alison Chen
Outsourcing Team
Recruit Express Pte Ltd (EA Licence No.: 99C4599)

• Operate, maintain and ensure safety while operating the crane.
• Inspect the crane regularly for repair and ensure it is in good working condition for the next day operations.

Requirements:

• Holds a valid Crawler Crane Certificate
• At least 3 years of crawler crane operation experience.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

RESPONSIBILITY

-Checking of wood panel and pvc edging under hot environment

-Help in loading and unloading weight about 20kg

-Main job scope is machine production, end the wood panel will sent to your section for quality checking and packing

-Maintain safe and clean working environment by educationg and directiong personnel on the use of all control points, equipment , and resources

-Maintaining compliance with established policies and procedure

-Multitasking

REQUIREMENT

-Able to work overtime in weekend and public holiday

-Hardworking

-Willing to learn

Our client is a pioneering company dedicated to developing plant-based foods, believing in the power of plants to enhance human health and promote environmental sustainability through innovative practices.

• Manage customer inquiries across phone, email, and other channels, ensuring timely and accurate responses.
• Process customer orders and maintain up-to-date data in customer portals for efficient order management.
• Support marketing activities, including promotions, events, and product launches.
• Track and resolve customer complaints, collaborating with relevant departments for quick solutions.

Requirements:

• Diploma and above
• At least 3 years of experience in Marketing Administration.
• Proficient in Microsoft Office Suite.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Roles & Responsibilities:

• Operate the excavator machine in a safe and appropriate manner
• Perform daily routine check, maintenance and cleanliness of the excavator in good conditions at all time
• Operate the machine in safe manner to prevent any accidents and damages of properties
• Compliance with the site and the authorities' rules and regulations
• Work in construction company in construction environment
• Perform other adhoc duties assigned by superior
• Coordinate with on-site supervisor & colleagues

Job Requirements:

• Valid PUB & Excavator Certificates certified in Singapore
• At least 2 Years & Above experience
• Relevant working experience in Construction Industry
• Team player and able to work independently with positive work attitude

How to Apply:

PM/Message us at 8875 3388

By submitting any application or resume to us, you will be deemed to have agreed and consented to us collecting, using, retaining and disclosing your personal information to prospective employer for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you all the best.

Desmond Toh (EA Reg No: R1873209)

Manpower Advisors Pte Ltd (EA Lic No: 20C0231)

Responsibilities:

• Plans for production which includes releasing of work orders and ensuring on-time delivery of shipments based on customer requirements
• Works closely with purchasing and warehouse/logistics groups to ensure on-time receipt, delivery of materials and finished goods shipments
• Monitors and co-ordinates on material shortages, expediting and ensuring material availability to support production plan
• Manages spares planning support and ensure timely delivery of spares to distribution centre
• Drives spares repair material planning and optimize the materials needed to support the spares replenishment program
• Drives and minimize excess and obsolescence inventory
• Assists in developing, maintaining and improving existing processes, procedures and key performance metrics

Requirements:

• Bachelor Degree / Diploma or equivalent in Technical Engineering / Business / Supply Chain
• Minimum 2 years of related industry experience in manufacturing and production planningKnowledge of work order management and understanding of Bill of Material
  Proficient in an ERP system, preferably SAP system (PP module) with good knowledge of supply chain, materials flow concepts and production planning reporting/metrics
  Experience in low volume high mix (preferably equipment manufacturing) and DFT/pull manufacturing environment is a plus
• Strong written and verbal communication skills
• Team player, self-driven and able to work under pressure with a sense of urgency
• Ability to adapt to a fast-paced work environment and to work with a variety of offshore locations