Job Description:
We are looking for a highly skilled Physical Chip Design Engineer to lead the development of low-power and high-performance chip design processes. This is a critical role that requires deep expertise in advanced semiconductor technologies and the ability to drive full-chip physical design workflows from start to finish.

Key Responsibilities:

• Low-Power Physical Design Workflows: Lead and optimize processes to enhance energy efficiency while maintaining chip performance.
• Full-Chip Floor Planning & Place-and-Route: Oversee floor planning to ensure optimal performance, power, and area. Manage place-and-route processes for efficient, functional designs.
• Power Network Design & Analysis: Design and optimize power distribution networks, perform grid analysis to ensure power integrity and low-power design.
• Timing Closure, Power Integrity, & Signal Integrity: Resolve timing challenges, ensure power and signal integrity signoff, and perform necessary optimizations.
• Physical Verification (DRC & LVS): Conduct thorough physical verification, including Design Rule Checks (DRC) and Layout Versus Schematic (LVS) to ensure compliance with design specifications.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics, Electrical Engineering, Computer Science, or related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience: 4-5 years of hands-on experience in physical design, with expertise in low-power, high-performance chip design. Experience with 12nm and below semiconductor technologies and tape-out processes is essential.
• Technical Skills:
  • Expertise in full-chip floor planning, place-and-route methodologies, and physical verification (including DRC and LVS).
  • In-depth knowledge of power network design, IR drop analysis, and timing closure.
  • Proficiency in Synopsys IC Compiler, Cadence Innovus, or similar tools.
  • Proficiency with Static Timing Analysis (STA) tools.
• Programming Skills: Strong scripting skills in Perl, TCL, Python, and C++.

Job Summary:

We are looking for an Architecture Design Engineer to focus on the development and optimization of AI Chip hardware systems. This highly technical role involves designing simulators, optimizing AI chips at various levels, and developing front-end code to ensure AI chip functionality and performance.

Key Responsibilities:

• Simulator Design:
  Utilize tools like GEM5 to design and develop simulators for AI chips, ensuring accuracy and efficiency in simulating chip behavior across various workloads.
• Performance Optimization:
  Optimize AI chips at:
  • Algorithm Level: Enhance computational algorithms for efficiency.
  • Architecture Level: Design and refine the overall chip structure.
  • Circuit Level: Improve low-level electrical performance.
• Front-End Code Development:
  Write, test, and optimize front-end code for AI chip functionality, ensuring compatibility with the chip’s architecture.

Qualifications:

• Educational Background:
  Minimum Bachelor's degree in Computer Science, Electronics, or a related field. Advanced degrees are a plus.
• Technical Knowledge:
  • Strong understanding of computer architecture and AI hardware accelerators (e.g., GPUs).
  • Familiarity with memory access patterns in AI models and effective memory handling.

Job Description:
We are looking for a skilled and innovative AI System Hardware Engineer to join our team. In this role, you will take ownership of the full hardware R&D process, drive innovation, and ensure high-quality deliverables. If you’re passionate about cutting-edge hardware design and enjoy tackling complex challenges, we’d love to hear from you.

Key Responsibilities:

Lead the entire hardware R&D process, including:

• ASIC bring-up
• Developing hardware design schemes
• Selecting components
• Designing schematics and inspecting PCBs
• Conducting testing, debugging, and ensuring successful mass production
• Design innovative hardware solutions that enhance product functionality, performance, cost efficiency, and quality.

Qualifications:

• Education:Bachelor’s degree or higher in Computer Science, Electronics Engineering, or a related field.
• Technical Skills:Strong understanding of high-speed signal integrity and power distribution techniques.
  Familiarity with modern processors, including GPUs, FPGAs, and X86 architecture.
• Experience:Proven experience with ASIC bring-up and hardware validation.
  Proficient in using testing tools such as power sources, loads, and oscilloscopes.
• Tools:Expertise in hardware design software such as Cadence, Allegro, or similar tools.
  

EMQ2 is seeking a highly qualified Software Development Engineer to join our team and work on projects that impact the lives of many. Our products, including Enterprise Login, Payment Gateways, and Training and Learning Management Systems, are used by over 1,000,000 users. We're looking for passionate professionals to grow and learn with us. If you have more experience, you may be considered for a senior role.

You will be

As a developer on our team, you will have the opportunity to work with the latest technologies and take on challenging projects that will both test and reward your skills. In addition to working on projects that align with your passions and helping you grow as a developer, you will play a key role in the design and implementation of high-quality software systems. Collaboration is a crucial aspect of this role, as you will work closely with other engineering teams, product management, and QA/DevOps to ensure that our products meet the needs and expectations of our customers.

By actively participating in and providing feedback on internal practices, you will also help to drive our commitment to continuous improvement and excellence. This may involve suggesting new ideas or approaches, or providing constructive feedback on current processes. We believe that by constantly striving for excellence, we can provide the best possible products and services to our customers.

Ideally, should have

• Strong communication skills to work with clients and team members
• Passion for learning and growing as a developer
• Grit and determination to overcome challenges and strong problem-solving skills to solve complex problems
• Ownership of work and desire to deliver high-quality solutions
• Capable of understanding the business requirements, working closely with customers, product management, and engineering to develop customer-centric solutions
• Experience in Agile Software Development Methodologies or at least theoretical knowledge and classroom experience
• Experience in Software Development and Design with frontend technologies like ReactJS, NextJS, VueJS or React Native
• Experience in Source Control Management (SCM) tools such as Git
• Experience with web services and RESTful APIs
• Ability to work independently and collaboratively as part of a team in a flexible and fast-paced environment

It would be a plus if you also have:

• Experience working with Design Language System, design patterns and tokens
• Experience in using Continuous Integration and Continuous Deployment (CI/CD) tools
• Experience in backend technology stack like Java Springboot, ASP .NET or NodeJS
• Experience in using and developing with SQL databases (e.g. Microsoft SQL, MySQL)
• Experience in using and developing with Docker
• Experience in using and developing with Amazon Web Services (AWS)

Our Benefits:

• Competitive remuneration package
• Flexible work schedule and remote work options
• Career progression opportunities
• Medical Insurance Coverage
• Open & Transparent Culture with a flat hierarchy

How to Apply

Interested candidates, please send your resume to [email protected]

Our Recruitment Process

After submitting your resume, we will personally review it and invite qualified candidates to take a technical test. The test should take no more than 60 minutes and will be based on the skills required for the position.

If you pass the test, you will be invited for a technical interview with the hiring manager. The interview will be a 60-minute session where we will discuss your experience and knowledge in the field.

Based on the outcome of the interview, the hiring manager will decide if you are suitable for the position. If that's the case, our HR team will contact you with an offer and the next steps.

Job Description:

Facilities Operations and Management

• Lead the planning, be hands-on construction supervision and maintenance of facilities, equipment, and buildings
• Design and lifecycle management of all facilities and equipment
• Maintain documentation related to electrical systems, including schematics and maintenance records
• Develop and maintain workspace (clean room, lab & offices) that builds a work environment enabling collaboration, innovation, productivity, and destination of choice
• Ensure high level of service for transportation, pantry, and other services
• Lead all aspects of building space allocation and layout, communication services and facilities expansion
• Lead Singapore office access and security control in partnership with Asia Regional Security lead
• Ensure all facilities meet established environmental and safety control requirements in partnership with Asia EHS team
• Collaborate with the business continuity team on disaster preparedness policies and procedures
• Manage the portfolio KPIs, space utilization rate and budget spend
• Lead and implement Integrated Facility Management outsourced for Singapore

Space Planning and Projects

• Develop space roadmaps for cleanroom, lab, and offices to meet business needs
• Lead site planning and design for new building construction, remodels, cleanroom, and lab installs, capacity planning, space planning, and engineering
• Develop and manage budget/timeline for projects

Real Estate Management

• Drive proactive planning and management of the Singapore real estate portfolio and leases
• Manage the site selection, negotiate, and execute lease agreements

Vendor Management

• Lead oversight of the performance of service providers, contractors, vendors, and suppliers
• Partner with Indirect Procurement to select and manage vendors for construction and operations based on procurement guidelines and standards

Data Analytics

• Compile market data, forecast, budget, and other analysis to support real estate investment opportunities
• Create and benchmark industrial peers’ key operational and service levels KPIs

Qualifications

• Bachelor's Level Degree with at least 5 years of experience (preferably in Electrical)
• Possess Singapore Certified Energy Manager (SCEM)
• Strong understanding of energy auditing, energy modelling, and energy efficiency technologies
• Demonstrated ability to partner effectively with business groups and align with company’s goals and objectives
• Deep understanding of real estate and facilities ecosystem: strategic sourcing, supply chain management, people management, facilities management, lease transaction management, design, construction, and project management
• Experience in leading country level network of sites, including knowledge in Singapore and international commercial real estate markets and regulations from proposal to build.
• Held position(s) in relevant or manufacturing environments
• Experience in operation and maintenance of transformers, LV/MV switchboards, UPS, motors, frequency converters, and power distribution
• Ability to study protection circuits, single line drawings, and control circuits
• Knowledge of low voltage systems including fire protection
• Compulsory knowledge of HV, LV, transformers, switchboards, and breakers
• Manage projects related to electrical infrastructure upgrades and improvements
• Experience in project installation of electrical distribution systems
• Strong communication and presentation skills with senior leaders
• Proficient with organizing and using data and financial analyses support and influence decision-making
• Ability to travel up to 30% of the time

You will be at the core team of Delta Research Center leading disruptive technological advancement with strong business value that empower company’s new business in intelligence machines, robotics and automation. As a research engineer, you will collaborate with technical experts to develop state-of-the-art mobile robot products / solution. You will play a key role in continuously improving existing and new products /technology, as well as be part of a dynamic and growing ecosystem in this field. You will manage and execute research programs and projects – particularly in the domain of robotic manipulation that develop and deliver impactful research and business outcomes.

Responsibilities:

• Work within a cross-functional team of robotics scientists and engineers to develop next- generation autonomous mobile robots (AMR)
• Design system architecture, design and write software for robotic systems, sub-systems or modules in a continuous integration and continuous deployment (CI/CD) environment
• AMR setup, integration, programming and testing using different brands of mobile robots and mobile manipulators, including proprietary robots
• Providing hands-on on-site support for software development, integration, testing and troubleshooting of AMR platforms
• Translate new technology and research outputs into modular and re-useable software packages
• Design of experiments to benchmark system performance by adopting in-house and/or industrial test methodology
• Adopting latest standards and/or methodology to work (Agile, standards, open source, common platform)

Requirements:

• Degree/Masters in Electronics, Computing, Mechatronics Engineering or equivalent
• 4-6 years relevant experience in robotics software design, development and integration
• Passionate in robotic navigation, sensing/perception and control system design, prototyping and practical problem-solving; with hands-on experience with robotics system / hardware
• Proficient in programming languages such as Python and C++, and/or other languages
• Proficient in robot programming using Robot Operating System (ROS) and Linux environment
• Proficient in software development in as AGILE and collaborative environment using CI/CD tools and able to break down robotic software development into smaller tasks
• Experience in one or more of the following domains will be preferred: Localisation, Mapping, Navigation, Machine Vision, Path Planning, Motion Planning, and/or Mission Planning
• Experience with design and development of mobile robots or mobile manipulator will be a plus
• Must be result-orientated, independent and a self-driven team player

A. Overall Purpose Of The Job

As a member of the Service Desk team, this position serves as a single point of contact for all IT issues and requests reported by users through the different support channels (phone, email, Self-Service Portal, Tech Concierge Desk). It is responsible for providing support (remotely or onsite) on company supported computer software, applications, and platforms.

B. Key Responsibilities

The scope of responsibilities includes the following:

• Serve as the first point of contact for users experiencing technical issues via different support channels (phone, email, Self-Service Portal, Tech Concierge Desk).
• Diagnose, troubleshoot, and resolve hardware, software, and network issues efficiently. ● Log incidents and requests accurately in the service management tool, categorizing and prioritizing them based on urgency and documenting with event timeline.
• Escalate unresolved issues to relevant next level support team (L2/L3)
• Ensure effective management of all incident priorities including Major Incidents, Priority 1,2,3 and 4 and service requests through various communication channels, including phone, email, and in-person interactions at the concierge desk .
• Act as an Incident Manager and drive end-to-end Major Incident and Priority 1 incident management process
• Monitor ticket, email, chat, phone queues and agent performance to ensure adherence to service level agreements (SLAs) and quality standards
• Handle user account lifecycle management (Joiner, Mover & Leaver), access provisioning in accordance with company IT security policies.
• Perform regular out of office hours on call duties as per operational needs
• Oversee DSAT feedbacks and take corrective action
• Handle account provisioning across various system platforms (Active Directory, GSuite email account, Windows, Linux etc) for staff and generic accounts such as service accounts, admin account or FTP.
• Oversee daily cessation activities and evaluate any potential issues to ensure compliance with audit requirements.
• Provide reports upon stakeholder requests to list the active users or users associated with a specific application.
• Manage and process IT service requests, assist in projects including user profiling setup, software installation, and system configuration

● Assist in DWS (Digital Workplace Services) BAU tasks and projects such as but not limited to the following:

• OS imaging, deployment, upgrade, and tracking (Windows and Mac)
• Endpoint device management
• Hardware refresh
• Maintain up-to-date knowledge base articles for common issues, troubleshooting steps, and SOPs used by the Service Desk team
• Collaborate with cross-functional teams (Product Managers, Engineering, Architects, etc.), and business stakeholders and ensure proper escalation to improve service delivery and user experience.
• Communicate effectively with end-users, keeping them informed of the status of incidents and requests.
• Monitor alerts triggered from servers, databases, or systems and inform the respective teams for necessary actions.

C. Job Profile

• Required Qualifications
• Degree/Diploma in Computer Science, Information Technology, or related field • Proven work experience in an IT support function such as a Service Desk Agent, Desktop Support Engineer, or other similar roles
• Working knowledge and experience on ITSM ticketing tools (ServiceNow, etc.) • Working knowledge and experience on computer hardware, OS, software, and applications both in Windows and Mac environments.
• Comfortable in supporting users over the phone, onsite, or remotely using remote access tools such as Teamviewer
• Possess an ITIL v3 and above Foundation certification is an advantage
• Knowledge of user access management processes and tools such as Sailpoint or OKTA is a plus.

Required Competencies

• Excellent written and verbal communication skills
• A minimum of 5 years of experience in a 24X7 service desk or technical support role
• Good interpersonal and problem-solving skills
• Able to multitask and prioritize the tasks accordingly
• Pragmatic and flexible mindset to succeed in an ever-changing and dynamic environment • Capacity to learn and adapt to new technologies fast
• Ability to proactively carry out tasks independently or with minimal supervision
• Clearly and calmly communicating with team members or stakeholders to manage expectations and coordinate efforts during high-stress situations.

Job Description:

• Handle project planning, scheduling, monitoring and updating to meet project completion targets
• Perform site planning, coordination and inspection relating to the construction project so as to ensure that project completion timeline, requirements and budget are met
• Liaise with the BIM team to update the drawings or BIM Model with the latest information available timely
• Prepare as-built drawings or BIM Model and compile O&M Manual for submission
• To assist in project coordination and oversee of all Civil and Structural works on site and ensure all related activities are carried out as per drawings
• Review architectural & structural submission documents & submission drawings prior relevant authorities' submission
• Assist the Project team in site walk-down survey with other discipline engineers and Client representatives as required, in resolving technical issues until construction completion
• Liaise with internal and external parties for project management
• Any ad-hoc duties as assigned

Job Requirements:

• Minimum of 2 years’ HDB experience
• Recognized Degree in Civil Engineering, Project Management, Structural Engineering or equivalent approved by PEB, BOA or SISV
• Good knowledge of technical design and engineering, construction methodology and construction planning
• Good oral, written and inter-personal communications skills in dealing with individuals and groups at all levels
• Proficient in Microsoft Office, AutoCAD and knowledge of BIM
• Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment
• Obtain CONQUAS supervisor certificate will be added advantage

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Employment Type: Full-time

About the Role:

We are seeking a skilled and proactive IT Level 2 EUCD (End-User Computing Devices) Assistant Specialist to join our dynamic IT support team. In this role, you will be guided to provide second-level technical assistance to ensure seamless operation and optimal performance of end-user computing devices and systems. Your expertise will be crucial in resolving complex technical issues and delivering exceptional service to our users.

Key Responsibilities:

• Assist in Level 2 technical support for end-user devices, including desktops, laptops, tablets, mobile devices, and peripherals.
• Troubleshoot and resolve hardware, software, and connectivity issues in a timely manner.
• Collaborate with helpdesk to escalate unresolved issues and ensure prompt resolution.
• Install, configure, and maintain end-user devices and related software applications.
• Support system upgrades, patches, and new software rollouts for end-user devices.
• Manage and update IT documentation, including FAQs and troubleshooting guides.
• Monitor and address vulnerabilities and compliance issues on end-user devices with other infrastructure teams.
• Provide excellent customer service by effectively communicating technical solutions to non-technical users.

Required Qualifications:

• Minimum 1 years of experience in IT support, specifically with end-user computing devices.
• Good technical knowledge of Windows, macOS, and mobile operating systems (iOS/Android).
• Experience with Active Directory, Office 365 and remote troubleshooting tools.
• Familiarity with endpoint security solutions and system management tools (e.g., SCCM, Intune).
• Strong problem-solving skills and ability to work independently under minimal supervision.
• Excellent communication and interpersonal skills with a customer-focused mindset.

What We Offer:

• Competitive salary and benefits package.
• A supportive and inclusive work environment.
• Exposure to cutting-edge technologies and projects.

How to Apply:

Interested candidates are encouraged to submit their resume and cover letter outlining their qualifications and experience.

Join us in delivering exceptional IT support and driving technological excellence!

Job Responsibilities:

• Design and commissioning of building electrical systems including, fire alarm, EVCS, power distribution, lighting, lightning protection etc.
• Perform Lighting Power Budget calculations.
• Understand and design Single Line Diagram and perform electrical load calculations.
• Understand and familiarize with Singapore authority requirements and adherence to Singapore building code of practices.
• Involve with project site meetings to understand client requirements and site supervision.
• Participate in Testing & Commissioning phase of completed electrical installations.

Experienced Electrical Engineer with minimum 5 years of relevant experience is welcomed to apply.

Requirements:

• An electrical engineering degree recognised by the PEB of Singapore.
• Familiar with statutory code and requirements.
• Minimum 5 years of work experience as a Electrical design Consultant in an M&E consultancy firm.

Job Description:

We are looking for an Analog Chip Design Engineer to lead the development of digital standard cell libraries and design advanced analog circuits. You will optimize circuit designs, innovate new digital standard cells, and collaborate with cross-functional teams to meet performance, power, and area requirements.

Key Responsibilities:

• Circuit Design & Optimization: Lead analog circuit design, optimize for speed, power, and reliability using Cadence Virtuoso, Spectre, and HSPICE.
• Digital Standard Cell Libraries: Develop high-performance, low-power digital standard cells.
• Innovative Architecture Development: Research and design innovative digital standard cell architectures and explore new logic families and power-saving techniques.
• Collaboration: Work with layout designers to ensure manufacturability, performance, and adherence to DFM/DFT standards.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. is a plus.
• Experience: 5+ years in high-performance analog design with expertise in deep sub-micron process technologies (12nm and below).
• Skills:
  • Analog Design Expertise: Proficient in transistor-level design, noise analysis, and power optimization.
  • Tool Proficiency: Experience with Cadence Virtuoso, Spectre, and HSPICE.
  • Digital Standard Cell Design: Experience designing digital cells balancing performance, power, and area.
• Communication: Strong collaboration skills and ability to work in cross-functional teams.

Job role:

1. Works with the front-end design team to complete the chip floorplan , clock

architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDS2, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability (DFR) and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an

automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 3 years of work experience in the digital backend design field.

3. Hands-on project experience is required.

4. Tapeout experience at advanced technology is prefered.

5. TCL , Perl or Python script development and familiar with EDA tool design will be plus.

Responsibilities

• To ensure smooth operation of site activities.
• To Provide logistical support (site utilisation) when needed, as requested by sub-contractors.
• To be the liaison for the coordination of different trades within the same discipline.
• Responsible for all on-site engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients queries to ensure timely work arrangements.
• Involve in day-to-day management of site supervision of construction activity to ensure site works are carried out as per schedule

Qualifications

• Degree/Diploma in Design/Structural/Architectural/Civil Engineering/Building Construction or any equivalent qualification.
• Experience/Knowledge in structural steel works/ precast RC works/ Building/ MRT/ LTA is an advantage
• More than 8-years of site experience in Construction sector.
• Good team player and able to work independently
• BCSS Certificate
• Interested applicants are required to submit their detailed CV and state their current and expected salary.

Summary:

• Construction industry
• Junior role up to $3800
• Senior role up to $5000
• Performance bonus on a yearly basis
• Location: AMK / YCK / Central
• 5 days work week
• Experienced in ACMV & LTA / SMRT

Key Responsibilities:

• Perform engineering design, calculations, planning, and tender preparation / evaluations
• QA/QC documentation of engineering deliverables (DTS,MSS,RFI)
• Liaise with clients, project managers, architects, contractors about the projects
• Assist in resolving any technical problems faced during project design and / or construction stages
• Any other required duties as required by the Project Team

Key Requirements:

• At least 3 years experience in relevant field
• Must have ACMV, LTA / SMRT experience

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

• To assist the Professional Engineers and Mechanical Engineers to design and draft in 2D/3D or AutoCAD/BIM M&E systems of buildings (Electrical, Fire Protection, ACMV, Pumbling & Sanitary systems).
• Identify and resolve coordination/interface issues with project engineers, subconsultants, contractors and clients.
• Experience with AutoCAD, and Revit MEP.

Responsibilities:

• Design, develop, and test electronic circuits for embedded systems.
• Develop and debug embedded software using C/C++ or other relevant programming languages.
• Implement software solutions and design interfaces to support robot integrations
• Perform circuit simulations and PCB layout design.
• Optimize power consumption, performance, and reliability of embedded systems.
• Collaborate with cross-functional teams to define system requirements and specifications.
• Conduct design reviews, testing, and validation of hardware and software.
• Provide technical support and troubleshooting for product development and production teams.
• Assist robot field testing, evaluate the performance of our systems, and create performance reports.
• Contribute to overall architecture design and documentation.

Requirements:

Technical qualifications:

• Background in Computer Science/Electrical Engineering/Mechanical Engineering with focus in robotics, mechatronics, or related fields
• Proficient in ROS or C++ or Python and embedded programming
• Strong knowledge of robotic platforms, robotics hardware (sensors, actuators), and networks (Ethernet, Ethercat, CAN, Modbus, RS232, etc)
• Experience in circuit design, PCB layout, and debugging using tools like oscilloscopes, logic analyzers, and multimeters.
• Familiar with Linux platform, its configuration, and command line operations

As an Associate Engineer in Product Support Organization, within the Aftermarket Products & Services (APS) Business Unit, this role is responsible for the technical activities that support the repair and refurbishment of goods. This includes the completion of the quality of goods meeting schedule timelines.

The Associate Engineer ensures smooth repair and refurbishment of goods:

• Repair and refurbishment support: Ensure assemble of goods with accuracy
• On time delivery: completion of work order within the scheduled time frame

Responsibilities

• Create repair and/or refurbishment work orders.
• Expedite support and coordinate the replenishing of materials and work with materials planners to proactively solve raw material issues.
• Ensure materials are issued correctly as per work order.
• Perform Troubleshooting and Diagnostic based on Troubleshooting Guide
• Perform bonding and data collection based on Standard Work Instruction and Test Procedures (~2 - 4 hours standing and using microscope)
• Disassembly, assembly and Testing of Mechatronics Assemblies module to Standard Work Instruction and Test Procedures.
• Update system records in a timely upon completion.
• Support Agility Training to all Product Lines based on Supervisor’s assignment.
• Performs other duties as assigned.

Qualification

• Minimum qualification of Vocational Certificate/NITEC in Electrical or Mechanical Engineering
• Minimum experience of 2 years in the semiconductor/ manufacturing industry
• Basic knowledge of wire bonding and/or die bonding technology is preferred
• Able to work independently to troubleshoot and analyze machines and spares issues when needed
• Possess good written and communication skills
• Proficient in Microsoft Office (Excel, PowerPoint and Words)

Company Overview

Founded in 1951, Kulicke and Soffa Industries, Inc. (NASDAQ: KLIC) specialize in developing cutting-edge semiconductor and electronics assembly solutions enabling a smarter and more sustainable future. Ever-growing range of products and services supports growth and facilitates technology transitions across large-scale markets.

Please refer to the website for more details: www.kns.com.

Equal Opportunity

Kulicke & Soffa recruits on the basis of merit (such as skills, experience or ability to perform the job), regardless of age, race, gender, religion, marital status and family responsibilities, or disability.

BROAD FUNCTION

A dedicated and proactive IT Support Engineer with a strong foundation in supporting environments primarily consisting of Windows devices and the Microsoft 365 suite.

Manage IT assets and responsible for troubleshooting/repair, providing technical support, and ensuring seamless end-user IT operations.

Effectively support the organization's IT needs, contribute to a positive user experience, and grow within the role.

ROLES AND RESPONSIBILITIES

• Provide Technical Support: Ensure timely and effective resolution of technical issues related to windows devices and Microsoft 365 applications, minimizing downtime and maintaining productivity.
• Enhance User Experience: Deliver high-quality customer service and support to end-users, ensuring their IT needs are met and they are satisfied with the solutions provided.
• Maintain IT Infrastructure: Assist in the maintenance and optimization of the IT infrastructure, including performing routine updates, backups, and system monitoring to ensure smooth operations.
• Support IT Projects: Contribute to various IT projects and initiatives, providing support and collaborating with the IT team to achieve project goals and improve IT services.
• Develop Technical Skills: Continuously learn and develop technical skills to stay updated with the latest technologies and best practices, enhancing the overall capability of the IT support team.
• Documentation and Reporting: Create and maintain detailed documentation of IT processes, procedures, and troubleshooting steps, ensuring knowledge is shared and easily accessible within the team.
• User Training and Education: Conduct training sessions and create user guides to help end-users effectively utilize Windows devices and Microsoft 365 applications, promoting best practices and reducing common issues.
• On Rotating Roster: Provide standby support during off-office hours and weekend on a rotational basis.
• Ad-Hoc Assignments: carry out any other tasks assigned by the Supervisor or Reporting Officer.

EXPERIENCE

• Technical Support: Provided first-level support to users, resolving issues related to Windows devices and Microsoft 365 applications. Assisted in setting up new workstations and configuring user accounts.
• Incident Management: Logged and tracked support tickets using IT service management tools. Ensured timely resolution of incidents and escalated complex issues to senior engineers when necessary.
• System Maintenance: Performed routine maintenance tasks such as software updates, system backups, and virus scans. Monitored system performance and implemented necessary optimizations.
• User Training: Conducted training sessions for end-users on best practices for using Windows devices and Microsoft 365 applications. Created user guides and FAQs to assist with common issues.
• Collaboration: Worked closely with the IT team to support various projects and initiatives. Participated in team meetings and contributed to the continuous improvement of IT services.

SKILLS

• Technical Support: Proficient in diagnosing and resolving hardware and software issues on Windows devices. Experienced in providing remote and on-site support to end-users.
• Microsoft 365: Skilled in managing and troubleshooting Microsoft 365 applications, including Outlook, Teams, OneDrive, and SharePoint. Familiar with user account management and license allocation.
• Windows OS: Strong understanding of Windows operating systems (Windows 10/11), including installation, configuration, and maintenance. Knowledgeable in Active Directory for user and group management.
• Networking: Basic knowledge of networking concepts such as TCP/IP, DNS, DHCP, and VPN. Capable of troubleshooting connectivity issues.
• Customer Service: Excellent communication and interpersonal skills, with a focus on delivering high-quality support and ensuring user satisfaction.
• Documentation: Ability to create and maintain detailed documentation of IT processes, procedures, and troubleshooting steps.

QUALIFICATIONS

• Diploma or Bachelor's Degree in IT with minimally 3-5 years of relevant experience.
• With relevant certifications such as CompTIA A+, Microsoft Certified: Modern Desktop Administrator Associate, Azure Fundamentals, CCNA, or equivalent will be an advantage.

Responsibilities:

• Provide tier-3 technical support for robotic systems, including hardware, software, and firmware components.
• Diagnose and resolve technical issues reported by customers, collaborating with the technical team to escalate and address complex problems.
• Document and report recurring issues to the Technical team to support continuous improvement and product development.
• Facilitate knowledge transfer sessions, training, and technical briefings to empower the Customer Success team in providing top-tier support to customers.
• Participate in testing and validation of new robotic systems and updates, providing critical feedback to ensure customer needs and experiences are addressed.
• Maintain detailed records of technical issues, resolutions, and feedback from customers and the Customer Success team.
• Develop and update technical documentation, user manuals, and support guides to assist the Customer Success team and customers in effectively utilizing robotic systems.

Requirements:

• Bachelor’s degree in Robotics, Electrical Engineering, Mechanical Engineering, Computer Science, or a related field.
• 2+ years of experience in technical support
• Excellent problem-solving skills with the ability to diagnose and resolve complex technical issues.
• Strong communication and interpersonal skills, with the ability to effectively bridge gaps between technical and non-technical teams.
• This position may require occasional travel to customer sites.
• Good English communication skills (verbal and written).

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Mission:

- Develop Go to Market Strategies on the IDEC’s focused products for specific vertical markets in the APAC Region

- Meet the growth target of product group in the APAC

- Develop sales across APAC & Middle East as per assigned targets

- Assist distribution channel during customer visits to conduct design-in opportunity

- Regular visits to direct account/customers to maximize IDEC opportunities

- Generate NBO (New Business Opportunities)

- Maintain a strong level of relationship with Distributors & Direct Accounts

- Following the group's pricing and sales policies

- Provide timely and accurate weekly and monthly Sales report to the sales management

- Maintain and share competitive intelligence

- provide customers feedback, market trend and new product development ideas to the sales/product management

Main Tasks:

- Tracking product performance against target

- Provide go to market strategy and for successful penetration into the focused vertical markets, identifying suitable portfolio for specific vertical markets

- Sales management and mentoring of distributors in assigned territories to generate NBOs and achieve budget

- Periodic visits to the distributors to conduct business reviews and regular joint customer visits

- Raise and follow up special price enquiries, prepare quotations with objective to maximize margin

- Assist distributors during exhibitions both at Marcom level and physical presence during the event

- Finding new prospective distributors and customers when needed

- Analyzing feedback from various channels and proposal of actions to Management

- Collect and feedback any competition information

- Prepare and Manage Sales Forecast quarterly/yearly in conjunction with Company Business Plan

- Work with colleagues and managers to understand & promote Company strategy & objectives

- Presentation of periodic reports with activity analysis

- Any other reasonably duties define by direct manager

Key Performance Indicators:

- Achievement of company turnover objective

- Achievement of personal turnover objective

- Achievement of Product and Vertical market growth target

- Achievement of NBO generation & win (number to be defined)

Territory Focus: APAC and Middle East. Region to be defined (e.g. Singapore, Malaysia, Indonesia, Vietnam, Philippines, S. Korea, Australia)

Candidate Profile:

- Bachelor’s Degree in electrical engineering is preferred (not mandatory)

- Minimum of 4 years of experience in OEM or distribution sales, product management

- Experience working with multiple distribution channels

- Ability to translate customer requirements into workable solutions

- Strong oral and written communications skills

- Strong technical aptitude & the ability to understand & communicate technical information

- Strong organizational skills & the ability to coordinate multiple projects simultaneously

- Able to travel overseas as required

- Good attention to detail and strong follow-up skills

- Ability to analyse sales results, interpret data and prepare action plan accordingly

- Knowledge of Microsoft Word, Excel and PowerPoint

- Experience with Salesforce.com is a plus (not mandatory)

- Posess a driving licence and car is desired (not mandatory)

Attractive package based on fixed salary + Variable bonus based on KPI’s achievement + Local travel allowance + Telephone allowance.