• Experienced in the design of water treatment plants (desalination, potable water, recycle water), wastewater treatment plants (municipal and industrial) and membranes systems (MBR, MF/UF, Reverse Osmosis, Nano-Filtration, etc.)

• Review Client’s Requirement, Technical Specifications & Tender Specifications to generate engineering deliverables (General Specification & Particular Specifications, Datasheets, Major Equipment List, Pipe List, Mass Balance, Hydraulic Profiles, Process Flow Diagram, Process & Instrumentation Diagram, etc.)

• Assist the Engineering Manager on engagement with Clients, Consultants, Sub-Contractors, Vendors, and others for the development of design, procurement, fabrication, construction, erection and commissioning works.

• Coordinate with inter-disciplines engineering team (Process, Mechanical, Electrical, Instrumentation & Control Automation, C&S, Piping & Systems/Skids Engineering and Drafting) on development of engineering deliverable on a timely basis.

• Reviewing and providing input to project schedule and ensure all planned dates and progress are realistic. Provide updates on engineering deliverables per schedules and implement catch-up actions where applicable.

• Procurement Services Support: Develop the applicable Equipment List/Package, Technical Specifications and Bill of Materials to support Procurement Department to issue Request for Quotation (RFQ). Assist to review the RFQ, prepare applicable technical & commercial clarifications with selected Sub-Contractors or Suppliers. Provide justification on the shortlisted Sub-Contractors or Suppliers for onward negotiations.

• Assist the Engineering Manager on the development of FAT, SAT, Pre-Commissioning, Start-up, Commissioning protocol and support the implementation.

• Development of Operational & Maintenance Manual.

• Assist the Engineering Manager to support project management team in project implementation related engineering, troubleshooting and maintenance requirement.

No experience/Diploma in precision/mechanical/mechatronic/electrical/electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2600, after 3 months confirmation $2700

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

No experience/Diploma in precision/mechanical/mechatronic/electrical/electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2600, after 3 months $2700

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

No experience/Diploma in precision/mechanical/mechatronic/electrical/electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2600-$2800+OT+allowances>$3K

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Responsibilities :

• Experience in integrating vision systems with automated processes, motion control based on model data, mathematical modeling experience and creating software solutions.
• Work in a multi-discipline team to aid in the collection and validation of system requirements.
• Create automated inspection and guidance solutions using vision and other sensing technology.
• Provide hands-on implementation and mentoring.
• Create innovative technical concepts, ensure costing and schedule to successfully deliver the project.
• Maintain knowledge of new vision, automation and sensing technology.
• Detailed design specification generation.
• Provide internal and on-site integration support.
• Aid in the creation of test plans and documentation.

Requirements :

• Bachelor's Degree in Electrical Engineering or Mechanical Engineering with min three (3) years of relevant experience.
• Experience working with vision system database.
• Knowledge of camera, light, and lens selection for applications ranging from defect detection to part location.
• Programming background with high-level languages such as Visual C# WPF, C++ and Python.
• Experience in developing vision system with Halcon and Opteon camera.
• Good knowledge in Machine Vision programming and experiences.
• Good experience on automation controls, motors & sensors like PLC, CTC, Beckoff PC and controllers, Servo & Stepper motors.
• Familiarity with wiring/cabling size/terminations and load/temperature requirements.
• Familiarity with industrial machinery design.
• Skilled in the utilization of statistical analysis.
• Required to travel regionally (average 20% of the time).
• 5 days work week.
• Transport pick-up at Bedok MRT station.

• Provide supervision services for all M&E works to ensure that contractors complies with contract/authorities'/agencies' requirements
• Oversee the M&E team and personnel
• Review all drawings and specifications and highlight any discrepancies, non-workable and/or missing details to OIC and the QP(D)s and QP(S)
• Review and comment on all construction method statements, risk assessmentsfor works, workplans, design for safety (DfS) workshop and SOP proposals
• Evaluate technically any claims submitted by main contractor and submit recommendation to the Superintending Officer
• Provide all relevant endorsements required by authorities/agencies/client
• Assist QPD for application of TOP and CSC
• Prepare site supervision plan and supervise all works directed by OIC
• Monitor project progress to ensure timely completion and prepare necessary site progress and status report for update to client
• Adhere to regulations and requirements of all stakeholders for any supervision work while ensuring proper supervision
• Report any accident/incident/near miss on site

Requirements

• Accredited with Resident Engineer certification under Joint Accreditation Committee of the Institution of Engineers Singapore
• Minimum 10 years of experience , of which at least 8 years in major construction works in buildings, services laying and testing and commissioning
• A Mechanical and Electrical Engineering degree recognised by the PEB of Singapore
• Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report
• Licensed electrical worker and licensed plumber are preferred

The Process Engineer will be based in Changi South reporting to Engineering section Lead.

In charge of process-engineering capabilities focused on cost, quality, and delivery improvements to hold up a manufacturing organization to build state of the art semiconductor equipment's.

Job Responsibilities

• Recognize the manufacturing process, technologies, techniques, and the product.
• Define, implement, and evaluate proposed designs and processes for manufacturability.
• Have the capability to singly or with other engineering stakeholders identify root causes of failures in the manufacturing process.
• High level participation in daily production activities and effective problem solving on daily issues.
• Prepare justification, purchase and implement capital equipment for production.
• Hold up and oversee new process equipment production.
• Hold up the raising and introduction of engineering change orders (ECOs).
• Establish robust, repeatable, and reproducible process parameters.
• Develop, implement, and take ownership of process control methodologies.
• Trouble shoot process related issues.
• Participate in activities pertaining to cycle time and process improvements.
• Evaluate and select various engineered materials.
• Implement statistical process research on new and existing products.
• Implement safety, productivity and give in improvements.
• Improve manufacturing techniques and throughput.
• Provide continuous development of manufacturing techniques that will improve in-house capabilities and gives in.
• Develop and maintain process documentation.
• Review processing methods.
• Interface with production of all activities associated with new process implementation and transfer.
• Assist in the development of training and provide training to production personnel during innovative technology transfer.
• Provide equipment maintenance and repair hold up as required.
• Guide to cost improvement/reduction programs.

Job Requirements

• Typically requires a bachelor's degree in mechanical engineering or manufacturing engineering or relevant field with equivalent experience and training.
• Typically requires 2-3 years of relevant experience.
• Use of the following tools may be required: Electronic Assembly: color code, component, and schematics.
• May require various PCB operations. Testing: oscilloscope, cable and harness testing, trouble shooting, component testing, logic analyzer. Inspection: bare board, systems, components, cable and harness, microscope, measuring tools. Mechanical & Electrical Tools: taps and dies, alignment tools, measuring tools.
• Those will Electrical & Electronics degree with process / manufacturing experience are welcome to apply.

Responsibilities:

• Manage all marketing/program activities requests.
• Manage customer's account/ project matters.
• Prepare quotation.
• Follow up project closely and attend to customers’ inquiry.
• Follow up with customers on the development of the project.
• Good presentation skills with ability to hold the interest of audience.
• Manage relationship with internal & external parties to ensure communication objectives are met within schedule, budget & the fulfilment of the projects.
• Undertake ad-hoc duties & projects from time to time.

**Successful candidate will be provided on-the job training

Requirements:

• Diploma/Degree in Mechanical/ Mechatronic/ Manufacturing/ Engineering/ Marketing or equivalent.
• Strong project management skills & marketing strategics.
• Good negotiation & interpersonal skills.
• Strong verbal & written communication skills with the ability to influence and persuade with a positive attitude.
• Self-independent.
• Fast paced environment show creativity and a different way of thinking will be essential.
• Team player with good & positive working attitude.
• Has passion towards marketing business/programme.
• At least 1 year working experience in related field; entry level candidates are welcomed to apply.
• Able to start work immediately.
• Comfortable to work at East area, Changi South.

• Conduct market research to identify potential customers and market trends to achieve monthly sales revenue.
• Expand new customer base, maintain and service existing customers.
• Work closely with supply and operation teams to ensure smooth deliveries.
• Handle inquiries and follow up on sales progress.
• Prepare bi-weekly Sales Reports for submit to the management.
• Mon to Fri ( 9am to 5:30am)

Description

• Expertise in configuring, customizing, and integrating payment engines such as Global PayPlus (GPP), Finastra, and familiarity with API-based payment solutions.
• Synthesize intricate high-level requirements into actionable, product-specific deliverables. Drive gap analysis within payment systems, particularly for Global Pay Plus (GPP) engines, and leverage technical depth to integrate API-driven solutions for seamless global deployments.
• Navigate intricate vendor relationships, guiding them through RFPs and the selection of payment solutions, particularly for advanced capabilities like Virtual Account Management.
• Oversee sanctions compliance and payment risk mitigation strategies, ensuring all systems adhere to the most stringent global compliance standards.

Description

• Expertise in configuring, customizing, and integrating payment engines such as Global PayPlus (GPP), Finastra, and familiarity with API-based payment solutions.
• Synthesize intricate high-level requirements into actionable, product-specific deliverables. Drive gap analysis within payment systems, particularly for Global Pay Plus (GPP) engines, and leverage technical depth to integrate API-driven solutions for seamless global deployments.
• Navigate intricate vendor relationships, guiding them through RFPs and the selection of payment solutions, particularly for advanced capabilities like Virtual Account Management.
• Oversee sanctions compliance and payment risk mitigation strategies, ensuring all systems adhere to the most stringent global compliance standards.

Job Description:

• Corporate with the constrcution manager to connect with various government acceptance departments.
• Corporate with the constrcution manager to supervise and manage the site to meet the various goals of the project.
• Corporate closely with subcontractors to monitor the progress of small towns and coordinate the work resources required by subcontractors to meet project requirements.
• Corporate with goverment personnel to conduct on-site inspections.
• Participate in weekly or monthly meetings with subcontractors to discuss work progress and corperate in preparing monthly meeting progress reports.
• Establish good relationships with all relevant parties.
• Corporate to ensure site safety and comply with the requirements of the authorities.
• Corporate to organize relevant physical and electronic documents on site engineer, etc.
• Other tasks assigned by the manager.

Requirements & Qualifications:

• Diploma / Degree or above preferably from a recognized University accredited with PEB, Singapore
• Experience with public residential projects would be advantages
• Proficient in Microsoft Office / Projects, AutoCAD
• Ability to keep a positive attitube in a fast-paced environment
• Good team player

West Region, Singapore

Sales Representatives/Consultants (Sales)

Full time

$3,500 – $5,000 per month (SGD)

Key Responsibilities:

• Promote and sell hygienic components, such as sanitary tubes, fittings, valves, and seals, to clients within the F&B, pharmaceutical, and semiconductor industries.
• Build and maintain strong relationships with key accounts, ensuring a high level of customer satisfaction.
• Identify and capitalize on new sales opportunities by understanding client requirements for hygienic components.
• Provide clients with detailed information on hygienic products, focusing on their applications within clean and contamination-sensitive environments.
• Meet or exceed sales targets, ensuring consistent growth in the market share of hygienic components.
• Collaborate with internal teams to address customer needs, ensuring timely delivery of products and solutions.
• Keep abreast of industry developments, trends, and regulatory requirements relevant to hygienic components.
• Assist in creating quotations, proposals, and contracts tailored to client specifications.
• Maintain detailed records of sales activities, customer interactions, and feedback.

Qualifications and Skills:

• Proven experience in sales, particularly in selling hygienic components to the F&B, pharmaceutical, or semiconductor sectors, is highly preferred.
• Strong communication, negotiation, and relationship-building skills.
• Bilingual in English and Chinese will be advantageous.
• Customer-oriented approach, with a focus on delivering tailored solutions to meet specific industry needs.
• Driver license with own transport will be advantageous.

The Test Engineer will be based in Changi South reporting to NPI Manager.

Responsible for implementing and maintaining cost-effective methods of testing and troubleshooting systems, software, and/or equipment for state-of-the-art semiconductor component manufacturing equipment's.

Job Responsibilities

• Directs and/or coordinate test process flow for system Integration and modular testing of high precisions electromechanical assemblies.
• Directs and/or coordinate test solutions for system Integration and modular testing in collaboration with OEM to meet the product functional performance to achieve zero defects in field.
• Directs and/or coordinates electronic and electromechanical engineering and/or technical personnel in fabrication and design of testing and test control apparatus and equipment, or software and systems testing.
• Directs and coordinates electronic engineering activities concerned with development, procurement, installation and calibration of instruments, equipment and control devices required to test, and record test data.
• Interfaces and confers with engineering and technical personnel to resolve testing problems such as product or system malfunctions, incomplete test data, data interpretation or coding issues.
• Evaluates and interprets test data and prepares technical reports for monitoring and management purposes.
• Resolve test yield problems by performing evaluation of root causes, developing, and coordinating corrective action measures and monitoring improvements.
• Trains and instructs floor support, test technicians and test operators on test hardware and/or software, as well as problem solving techniques.
• Perform and support equipment verification and integration in production.
• May develop or use computer software and hardware to conduct tests on electronic products and systems or software.
• Create and maintain process documentation.
• Actively search for innovative technologies or procedures in the test sector.
• Defines conditions under which tests are to be conducted and sequences and phases of test operations.

Job Requirements

• Bachelor's degree in electrical and electronics or Mechatronics field or equivalent experience and training which requires at least 4 years of experience in test engineering in the high technology electronics industry or related area.
• Modular/ System Integration Testing: Product functional testing and troubleshooting various test solution at various level component, modular and final system
• Experience in functional software, measuring equipment’s (Oscilloscope, logic analyzer, sensors, measuring gauges etc.) and tools that are integrated to perform the functional test to cover the product functionality
• Experience on modify or updating existing software solutions to support product design changes or test enhancements
• Experience in creating and maintaining stand operating procedures to enable easy of manufacturing and meeting all audit compliance.
• Inspection: PCBA board, systems, components, cable and harness, microscope, measuring tools.
• Handling Mechanical & Electrical Tools: taps and dies, alignment tools, measuring tools.
• Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
• Ability to write reports, business correspondence and procedure manuals.
• Ability to effectively communicate with managers and employees of the organizations.
• Impacts the near-term (quarterly/semi-annual)operational success of the function. Enhances and provides input to functional processes or technologies. Assists in achieving section/sub-function objectives for a functional area. Demonstrates capability in leading a major initiative that may impact multiple sites/customers.

The Industrial Engineer will be based in Changi South reporting to NPI Manager.

Job Responsibilities

• Analyze production processes, schedules, and workflows to optimize efficiency.
• Develop and implement process improvements to enhance productivity.
• Conduct time and motion studies to identify areas for improvement.
• Design efficient systems integrating workers, machines, materials, and information.
• Establish quality control procedures to ensure product standards are met.
• Manage inventory control and warehouse operations.
• Develop safety procedures to ensure safe working environments.
• Use computer-aided design (CAD) software to create efficient layouts.
• Collaborate with management and staff to implement solutions.
• Monitor operational performance and sustain improvements.
• Use simulation software to simulate new line setup or upsize or downsize of capacity.

Job Requirements

• Typically requires a Bachelor’s degree Industrial Engineering or equivalent experience in addition to 5 years of experience in a manufacturing or related Industry.
• Experience with Lean Manufacturing and Six Sigma methodologies.
• Experience in setting up factory or area for Cleanroom requirements
• Proficiency in CAD and simulation software
• Strong project management skills
• Excellent problem-solving abilities
• Effective communication and teamwork skills
• Understanding of ergonomic principles
• Capability to manage multiple projects concurrently
• Proficiency with statistical analysis tools
• Experience with production planning and control
• Ability to work independently and as part of a team
• Experience and Knowledge of operating bulky and heavy product : 5Mx7M and 10-15 tons weight

Develop and maintain software applications using C, C++, and Unix/Linux-based environments.

Write efficient, scalable, and well-documented code to optimize system performance.

Troubleshoot, debug, and resolve complex system and application issues.

Collaborate with cross-functional teams to design and implement new features.

Utilize shell scripting and other Unix utilities for automation and system management.

• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• Any other Adhoc tasks are given by management

Requirements:

• Min 8 years of civil engineering experience
• 3 years of experience in major construction works likes deep excavation, drainage, pipe jacking, ground improvement, supervision & installation of monitoring instruments and collating of monitoring data.
• Degree in Civil Engineering recognized by PEB
• Accredited as a RE with IES
• Able to perform shift work.

ELECTRICAL DRAFTER ENGINEER

· Produce accurate 2D Auto CAD drawing according to project requirement.

· On-site or Off-site support to the project team to co-ordinate and follow through with main contractors/ client’s requirement and amendments

· Update drawings for submission and approval

· Single line Diagram, lighting, lighting protection, earthing & cable routing, equipment and switch room layout etc.

· Amend redraw plan/section base on client’s comments

· Perform other duties as assigned

REQUIREMENT

· Candidate must possess at least a Nitec / Higher Nitec / Diploma in Electrical Engineering or equivalent; or Certificate in AutoCAD Drafting

· At least 2 years of relevant experience in electrical drafting

· Able to work independently and diligently under stress and pressure

· Good communication skills, team player, meticulous, independent and self-motivated

· Engineering or equivalent; or Certificate in AutoCAD Drafting

Job Description:

• Corporate with the constrcution manager to connect with various government acceptance departments.
• Corporate with the constrcution manager to supervise and manage the site to meet the various goals of the project.
• Corporate closely with subcontractors to monitor the progress of small towns and coordinate the work resources required by subcontractors to meet project requirements.
• Corporate with goverment personnel to conduct on-site inspections.
• Participate in weekly or monthly meetings with subcontractors to discuss work progress and corperate in preparing monthly meeting progress reports.
• Establish good relationships with all relevant parties.
• Corporate to ensure site safety and comply with the requirements of the authorities.
• Corporate to organize relevant physical and electronic documents on site engineer, etc.
• Other tasks assigned by the manager.

Requirements & Qualifications:

• Diploma / Degree or above preferably from a recognized University accredited with PEB, Singapore
• Experience with public residential projects would be advantages
• Proficient in Microsoft Office / Projects, AutoCAD
• Ability to keep a positive attitube in a fast-paced environment
• Good team player

Job Description & Requirements

The position will be responsible for the deployment and support of the enterprise-wide network system infrastructure and interconnected technologies that require day-to-day support and administration in order to obtain maximum availability of systems and optimal network performance.

Responsibilities :

• Administer, monitor, maintain and optimize WAN, LAN and Wi-Fi networks for optimal performance and maximum availability.
• Ensure all the Network devices (Routers, Switches, Load Balancers, Wireless LAN Controllers) & Firewalls remains in good working condition.
• Configure, troubleshoot, and resolve any issues within Network and Security areas, including performance and capacity issues.
• Respond to production issues speedily, including bringing up the defective hardware during and after office hours.
• Taking the lead in updating & documenting all Network configuration, Firmware, Network diagrams and all the cabling for all the End-Devices.
• Provide technical support and consultation, conduct procurement, and perform project management activities for enhancement and the change in Network and Security configuration.
• Define processes to manage the Network infrastructure; identify and drive service improvement initiatives to improve overall network operation quality and productivity.
• Work with vendor to manage and coordinate the infrastructure security reviews, assessments and penetration tests.
• Work with the cyber security team in the remediation of network related vulnerabilities.
• Manage network related projects as and when required.
• Any other related duties/tasks as assigned by immediate supervisor or Director, Information Technology.

Requirements :

• Diploma / Bachelor’s degree (or higher) in Electrical Engineering or Computer Science / Information Technology or relevant discipline.
• At least 5 years of relevant working experience in network administration.
• Preferably Cisco Certified Network Associate (CCNA) certified.
• Having any Security certification is advantageous.
• Familiar with the following Network configuration & setup: BGP, OSPF, MPLS, VPN Tunnel (GRE & IPSec), VRF, HSRP / VRRP, QoS, IP Flow Top Talkers, IP Accounting, ARP, NAT, PAT, Port Channel, VXLAN, Policy Routing.
• Familiar with Security Appliances such as Cisco FirePower, Fortinet Firewall and/or Palo Alto.
• Familiar with NMS setup and configuration such as NetFlow, MRTG / PRTG and SolarWinds.
• Familiar with F5 Networks / A10 Load Balancers devices.
• Have experience with Security Remediation Audit and RFP / RFQ Tender requirements.
• A motivated person with the ability to work independently, a good team player and goal oriented individual.
• Good interpersonal, communication and analytical skills.

Interested applicants are requested to write in with detailed resume indicating current and expected salary and availability.

We regret only shortlisted candidates will be notified.

Job Summary

We are seeking a highly skilled Devops Engineer (GCP) to join our team for scalability while ensuring the seamless functioning of our production environments. This is an opportunity to work in a fast-paced, dynamic environment and make a significant impact.

Mandatory Skill-set

• Has 2+ years of experience in cloud computing, specifically with GCP;
• Proven experience in cloud infrastructure design, cloud migStrong understanding of GCP services like Compute Engine, App Engine, Kubernetes Engine, Cloud Functions, Cloud Storage, BigQuery, etc;
• Proficiency in programming languages such as Java, Python, or C++ for application development and scripting;
• Familiarity with DevOps tools and practices, including CI/CD pipelines and container orchestration tools (e.g., Kubernetes).ration, and application development on Google Cloud PlatfStrong analytical and problem-solving skills with the ability to identify issues and provide effective solutions;
• Ability to troubleshoot and resolve cloud infrastructure and application performance issues;
• Experience working within Agile development teams and using version control systems like Git for collaboration;
• Knowledge of Agile methodologies such as Scrum or Kanban;
• Strong communication and interpersonal skills to work effectively with both technical and non-technical teams;
• Ability to explain complex technical concepts to non-technical stakeholders;
• Detail-oriented, with excellent time management and organizational skills.

Desired Skill-set

• Google Cloud Certified – Professional Cloud Developer or Cloud Architect;
• Experience working with containerized applications and Kubernetes;
• Knowledge of cloud security best practices and implementation, including IAM, encryption, and networking security;
• Understanding of compliance frameworks (e.g., GDPR, HIPAA, PCI-DSS) and the ability to implement these within the cloud environment.

Responsibilities

• Design and implement scalable, secure, and efficient cloud systems on Google Cloud Platform (GCP);
• Manage and optimize cloud infrastructure to meet the needs of the business while ensuring high performance, reliability, and availability;
• Develop and deploy cloud-native applications using GCP services such as Compute Engine, App Engine, Kubernetes Engine, Cloud Functions, and Cloud Storage;
• that applications are designed with scalability, resilience, and cost-effectiveness in mind;
• Plan and execute the migration of on-premises systems to GCP, ensuring minimal downtime and a seamless transition;
• Optimize resources during the migration process to achieve efficiency and cost savings;
• Implement security measures, including Identity and Access Management (IAM), firewalls, and encryption protocols to ensure data protection;
• Ensure that GCP deployments comply with internal policies, industry standards, and regulatory requirements (e.g., GDPR, HIPAA);
• Work closely with product teams, business units, and other stakeholders to gather requirements and provide cloud-based technical solutions;
• Collaborate on the design and development of new cloud-based applications or services to meet business objectives;
• Continuously monitor cloud infrastructure and applications using tools like GCP Cloud Monitoring, Stackdriver, and Cloud Logging to ensure optimal performance;
• Identify areas for improvement in terms of resource utilization, cost management, and system reliability;
• Stay up-to-date with the latest developments in GCP services, tools, and best practices;
• Drive continuous improvement in cloud architectures, application performance, and cloud deployment methodologies.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE's website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

EA Licence No. 07C5639

Job Description & Requirements

• Provides hands on technical expertise (SME) , senior level technical guidance to application team as necessary
• Assist and respond promptly to incident, investigate and provide temporary/permanent resolution to incidents escalated with respect to Middleware/ Operating system/ database performance, capacity, resiliency , stability,replication and other key aspects
• Researching and recommending solution that best meet business needs and enterprise operational requirements
• Provide technical support to application development teams
• Evaluate release of Middleware, Operating system, Database components and its tools to ensure entire environment is complaint with no/minimal impact

Qualifications

Understanding of protocols like HTTP/HTTPS/FTP/SFTP/AS2 etc

Programing experience in Java

Write Unix Shell & Bash Scripting

Familiarity with Linux operating system and commands

Capability to troubleshoot integration issues efficiently

Job Responsibilities:

• Create specifications and define software architecture for embedded systems.
• Design and develop MCU based firmware for embedded system.
• Design and develop middleware, application and GUI in Windows, embedded Linux or other environments.
• Work closely with other engineers to analyze and resolve bugs.
• Analyze performance bottleneck and optimize product quality and throughput.

Job Requirements:

• Master or degree in computer science, computer engineering or electronic engineering, or equivalent
• At least 5 years direct relevant experience for the senior engineer position.
• Fresh graduates with relevant knowledge or experience are welcome.
• Experience in MCU firmware or embedded Linux development.
• Firmware development experience with STM32 family is a plus.
• Good understanding in hardware and ability to develop low level codes.
• Strong programming experience in C/C++. Rich experience on embedded software development is a plus.
• Good knowledge in software debugging and performance optimization.
• Good experience in embedded systems based on ARM Cortex-M or Cortex-A series processors.
• Familiar with ISO13485 or IEC 62304 design process, source version control and bug tracking system is an advantage.
• Independent and resourceful.

Job Description

• 5 years relevant working experience in Water Treatment industries is preferable.

• Experienced in the design of water treatment plants (desalination, potable water, demineralization) and membranes systems (MBR, MF/UF, Reverse Osmosis, Nano-Filtration, etc.), experience in Demineralization System will be added advantage.

• Strong technical knowledge (i.e Process Design and Calculation) in Membrane (MF/UF/RO/EDI), Ion Exchange, and pretreatment processes (coagulation / flocculation, sedimentation, clarification, filtration)

• Review Client’s Requirement, Technical Specifications & Tender Specifications to generate engineering deliverables (General Specification & Particular Specifications, Datasheets, Major Equipment List, Pipe List, Mass Balance, Hydraulic Profiles, Process Flow Diagram, Process & Instrumentation Diagram, etc.)

• Assist the Engineering Manager & Lead Engineer, Process on engagement with Clients, Consultants, Sub-Contractors, Vendors, and others for the development of design, procurement, fabrication, construction, erection and commissioning works.

• Coordinate with inter-disciplines engineering team (Process, Mechanical, Electrical, Instrumentation & Control Automation, C&S and Drafting) on development of engineering deliverable on a timely basis.

• Procurement Services Support: Develop the applicable Equipment List/Package, Technical Specifications and Bill of Materials to support Procurement Department to issue Request for Quotation (RFQ). Assist to review the RFQ, prepare applicable technical & commercial clarifications with selected Sub-Contractors or Suppliers. Provide justification on the shortlisted Sub-Contractors or Suppliers for onward negotiations.

Requirement:

• Degree in Chemical Engineering or Environmental.

• Prior experience of at least 5 years in process design. Experience in UltraPure Water (UPW) will be added advantage.

• Ability to establish and maintain appropriate relationships with team members.

• Able to work independently with minimal supervision

• Hand on Experience with ETL, Informatica and writing Teradata SQL.
• Should be expert in Teradata Utilities
• Should be good in Unix Shell scripting
• Sound knowledge of financial service logical data model (Teradata FSLDM)
• Work closely with Business Users to convert the business requirement into Technical
• Requirement.
• Should be able to create Mapping documents for FSLDM and downstream data mart
• Must have work with ETL, preferably in Datastage
• Prepare Test cases for Unit Testing/SIT/Regression
• Design and document development standards
• Sound knowledge of Core Banking Domain
• Should have knowledge on Data warehouse Concepts
• Hands on experience in Control M Scheduling tool
• User and Client meetings
• Should be able to take ownership and deliver independently

Required Technical and Professional Expertise

• Experience in Teradata SQL Query Writing
• Hands on experience in Unix and shell scripts
• Experience in Teradata Utilities(BTEQ, Fast Load, Multi Load)
• Experience in FSLDM
• Control M
• Demonstrate string SQL skills and performance tunning
• Prefer Banking Domain
• Willingness to provide L2/L3 application support.
• Willingness to support on production issues on a 24/7 rotational basis.
• Willingness to support weekend and public holidays.