We are now seeking Field Service Engineer to perform on-site installation of systems and equipment and ongoing preventive maintenance, repair, and calibration after installation. On a worldwide basis, our engineers represent the company while servicing, troubleshooting and supervising repair of NOV equipment. They shall be proficient to make necessary repairs and minor corrections to systems as required and provide a high level of customer service for product maintenance and in-field repair.

Responsibilities:

• Perform inspection, installation, commissioning, repair, upgrading, troubleshooting and related service work on offshore drilling platforms, land rigs, Shipyard or in workshops.
• Liaise with rig’s management during offshore assignment.
• Communicate with respective Managers for briefing and debriefing of service-related activities.
• Fill in necessary job reports, ISO work instructions and checklists required for all work in a timely manner.
• Interface with relevant departments to obtain a thorough understanding of NOV products and how they are safely operated, tested, calibrated and problems are resolved in a timely manner.
• Communicate field failures and feedback reports to the appropriate departments.
• Install, commission, troubleshoot, and repair NOV drilling equipment
• Provide training to other NOV personnel on the following systems and equipment as needed.
• > Analog and digital PLC based systems
• > Proprietary integrated control systems (Cyberbase, Amphion)
• > Variable Frequency Drives
• > Hydraulic/Pneumatic Systems
• > Electrical Systems (including various types of AC/DC motors)

Job Requirements/ Qualification:

• Bachelor's degree in related field or equivalent combination of education and experience.
• 5+ years’ experience in a related field is most welcome.
• Travelling on short notice is required. approximately 50% travelling.

Technical Competencies:

• MS Office products (Word, Excel, Powerpoint, Project)
• Ability to understand electrical schematics and PLC programs. It will be advantageous if the candidate is well versed in hydraulic / mechanical systems and also have an in-depth knowledge of the of the Drilling Equipment designed by NOV.
• Preferred working experience in Reliability, Availability, Maintenance and Safety (RAMS) and application of FEMCAs (Failure Mode, Effects, and Criticality Analysis) strategies for predictive maintenance (PM) and corrective maintenance optimization.

General

• Responsible for all mechanical related technical solution engineering for major Data Center Projects in APAC.
• Develop and manage complete scope from initiation to onsite delivery of mechanical systems related to the diesel genset enclosure.

Tendering Matters

• Work closely with sales to define the technical scope (mechanical).
• Review/clarify customer’s specifications & tender documents.
• Review and finalize the C/D/E document.
• Provide the technical specifications and define the scope of supply for the equipment.
• Coordinate with factory and local suppliers to harmonize the scope of supply.
• Work with suppliers/contractors to quote for the equipment and obtain proposals timely.

Solution Engineering Matters

• Define the mechanical systems requirements for the walk in genset enclosures suitable for the project needs.
• Provide the design and prepares the drawings and documents for the customer’s technical requirements.
• Calculate, verify, and select the right equipment/suppliers.
• Uses the computerized engineering tools/database, technical library information and factory standards for the solution engineering work.
• Provide and maintain the product and solution engineering information.
• Prepare and carry out technical presentations and training.

Order Execution

• Verify and confirm the shop drawings, P&ID, datasheets, and similar technical documents to ensure customer specification compliance.
• Finalize equipment scope and specifications. Collaborate with internal departments to procure the equipment.
• Raise the purchase requisitions for the scope of supply.
• Support the execution team to resolve technical issue related to the mechanical systems during project execution, from packaging to site related.
• Participate in design review and lessons learnt sessions. Proactively provide valuable insights and recommendation to enhance system performance and efficiency.

​Other Matters

• Update oneself with the technical developments of the market and internal products.
• Travel overseas on business, when required.
• Special assignment from time to time.

Qualifications and Skills:​

• University / college studies in Mechanical engineering.
• Proven experience in the diesel engine/generator industry, min. 5 years with track record of successfully delivered projects and solutions.
• Solid understanding of Cooling system, Fuel system, Ventilation system of a diesel generator set and demonstrate the ability to integrate the understanding into designing a genset enclosure.
• Knowledge of engineering calculation for genset mechanical systems, for e.g., sizing calculation.
• Demonstrating the ability to conceptualize and execute complex mechanical designs and bring cost benefit to the customer.
• Knowledge of data centers, switchgear and electrical power protection would be an added advantage.
• Understanding of Asian cultures and business practices.
• Excellent team player with an open mindset, collaborative spirit, and exceptional communication skills, capable of effectively engaging with diverse teams and stakeholders to achieve common goals.
• Willingness to travel for onsite jobs when needed, demonstrating flexibility and adaptability to meet project requirements and deadlines effectively.
• Proactive and positive attitude.
• Proficient in 2D/3D CAD software.
• Proficient in English language.

Location: Yishun

Mon to Fri 8.30am to 5.30pm

salary: $3000-$3500

Japanese MNC

Have AWS & bonus

Industry: Electronic component manufacturing

Job Highlight

• Work life balance
• Career progression

Job Description

• Serve existing customers
• Understand customers’ needs, obtain feedback, and accurately forecast short-term and long-term requirements.
• Proactively explores business opportunities and expands market share including developing and implementing market penetration strategies to maximize business opportunities.
• Other adhoc duties as assigned.

Requirements

• No experience / Fresh / Entry welcome
• Diploma in engineering
• Ability to communicate effectively in English and to be bilingual (for business communication)

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

• Support engineers in conducting site acceptance tests, commissioning, and start-up for transformers and switchgear. Knowledge of UPS, Low Voltage/Medium Voltage Variable Speed Drives, and PLC systems is a plus.
• Perform preventive maintenance, breakdown repairs, fault investigation, and troubleshooting of electrical equipment.
• Provide field operations and technical support to customers, helping them identify their needs and offering post-sales service solutions.
• Address on-site repair and maintenance issues, troubleshoot, and effectively resolve technical problems.
• Deliver field feedback to engineering and manufacturing teams to assist in new product development and improvements to existing products.
• Manage the procurement of spare parts from Supplier

Job Requirements:

• Diploma/ITE in Electrical Engineering or a related field.
• Relevant experience in technical servicing roles.
• Hands-on experience in customer service with the ability to work independently on-site.
• 1 to 2 years of field service experience in a related industry.
• Strong communication & analytical skills.
• Must be ready to travel on business trips

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Apply Now” or aliceyap(a)hkmsvs.com

All applications will be treated in the strictest confidence and only shortlisted candidates will be notified

Yap Lay Choo

EA Licence No. 03C5391 | Registration No. R1987101

Location: Yishun

Mon to Fri 8.30am to 5.30pm

salary: $3000-$3500

Japanese MNC

Have AWS & bonus

Industry: Electronic component manufacturing

Job Highlight

• Work life balance
• Career progression

Job Description

• Serve existing customers
• Understand customers’ needs, obtain feedback, and accurately forecast short-term and long-term requirements.
• Proactively explores business opportunities and expands market share including developing and implementing market penetration strategies to maximize business opportunities.
• Other adhoc duties as assigned.

Requirements

• No experience / Fresh / Entry welcome
• Diploma in engineering
• Ability to communicate effectively in English and to be bilingual (for business communication)

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

JOB DESCRIPTION: Candidate will be involved in industry projects and use 3D printing technology and other post processes to build parts using polymer reinforced fiber composite materials.

RESPONSIBILITIES:

-Operate equipment to perform 3D printing and relevant post-processes (e.g. cam-based systems), mechanical charaterisation such as tensile, bending, compression tests and inspection (e.g., CMM) as part of the industry project.

-Responsible for generating jig and fixturing 2D/3D drawings for documentation and archiving purposes.

-Manage and work with local machining house for jig and fixture fabrication and assembly.

-Carry out routine maintenance, diagnostics checks and engage equipment vendors for preventive maintenance.

-Perform function testing to verify equipment readiness after maintenance or material change.

-Plan equipment schedule, maintain and improve lab environment. Manage raw feedstock and maintain stock/inventory list.

-Responsible for ensuring duties are performed in a safe, efficient, and effective manner.

JOB REQUIREMENTS:

-NITEC or Diploma in engineering related qualifications.

-At least 5-year work experience in manufacturing roles within the aerospace / MRO / oil and gas / manufacturing industry. Candidates with > 5-year experience will be considered for a senior role.

-Capabilities in CAD and 2D drawings using NX/SolidWorks, with knowledge in GD&T will be beneficial.

-Traditional methods of inspections such as CMM/handheld measurement tools and preparation of FAI documents is preferred.

-Familiarity in handling CAM based systems such as robotic system/CNC is an added advantage.

-Methods of processing and post processing of plastic parts such as prototyping of plastic parts and knowledge in fixture design for machining is preferred.

-A team player who is motivated to solve technical challenges and deliver on time to customers.

-Willingness to learn and adapt to new technology promptly.

-Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• MNC, Tuas, Transport (2 ways)
• Heavy travelling, Good exposure and opportunities
• Basic $3800 - $5000,overtime claim
• Overseas allowances, mobile allowance
• Performance bonus
• No experience can apply, On-the-job training

Role & responsibilities:

• Support the Senior/ Service & Commissioning Engineer on site.
• Provide technical expertise and carryout service order assignments from the Service & Commissioning Manager/ Service & Commissioning Coordinator
• Field representative of the company to evaluate, troubleshoot, analyze, repair, test, and return equipment to service as required or instructed by a service order in a safe and effective manner.
• Create daily reports about the performed service tasks and all related issues and send them to the Service Mailbox
• Complete all the required documentation & write reports regarding the work

Requirements:

• Minimum a Degree in Electrical, Electronic, Computer Science or equivalent
• Good, basic, technical insight into electrical, hydraulic and basic mechanical engineering fundamentals
• 1yr of relevant experience in Marine/Oil & Gas industry
• No experience can apply as on-the-job training is provided
• Good communication skills
• Analytical and systematic approach to problem solving
• Basic understanding of programming and industrial control systems is a plus
• Willing to travel abroad heavily
• Willing to work overtime
• Having a great desire to gain more knowledge and skills
• Positive, solution driven, hands on attitude.
• Can work well in a team but having a great level of self-management and independence

Interested applicants, please send your profile to [email protected]

Location: Yishun

Mon to Fri 8.30am to 5.30pm

salary: $3000-$3500

Japanese MNC

Have AWS & bonus

Industry: Electronic component manufacturing

Job Highlight

• Work life balance
• Career progression

Job Description

• Serve existing customers
• Understand customers’ needs, obtain feedback, and accurately forecast short-term and long-term requirements.
• Proactively explores business opportunities and expands market share including developing and implementing market penetration strategies to maximize business opportunities.
• Other adhoc duties as assigned.

Requirements

• No experience / Fresh / Entry welcome
• Diploma in engineering
• Ability to communicate effectively in English and to be bilingual (for business communication)

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

JOB DESCRIPTION: Candidate will be involved in industry projects and use 3D printing technology and other post processes to build parts using polymer reinforced fiber composite materials.

RESPONSIBILITIES:

-Operate equipment to perform 3D printing and relevant post-processes (e.g. cam-based systems), mechanical charaterisation such as tensile, bending, compression tests and inspection (e.g., CMM) as part of the industry project.

-Responsible for generating jig and fixturing 2D/3D drawings for documentation and archiving purposes.

-Manage and work with local machining house for jig and fixture fabrication and assembly.

-Carry out routine maintenance, diagnostics checks and engage equipment vendors for preventive maintenance.

-Perform function testing to verify equipment readiness after maintenance or material change.

-Plan equipment schedule, maintain and improve lab environment. Manage raw feedstock and maintain stock/inventory list.

-Responsible for ensuring duties are performed in a safe, efficient, and effective manner.

JOB REQUIREMENTS:

-NITEC or Diploma in engineering related qualifications.

-At least 8-year work experience in manufacturing roles within the aerospace / MRO / oil and gas / manufacturing industry. Candidates with > 5-year experience will be considered for a senior role.

-Capabilities in CAD and 2D drawings using NX/SolidWorks, with knowledge in GD&T will be beneficial.

-Traditional methods of inspections such as CMM/handheld measurement tools and preparation of FAI documents is preferred.

-Familiarity in handling CAM based systems such as robotic system/CNC is an added advantage.

-Methods of processing and post processing of plastic parts such as prototyping of plastic parts and knowledge in fixture design for machining is preferred.

-A team player who is motivated to solve technical challenges and deliver on time to customers.

-Willingness to learn and adapt to new technology promptly.

-Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

• Take instruction from/assist reporting to superior.
• Produce sketch drawings.
• Set design criteria , check design calculation and drawings.
• Assist in technical proposals.
• Check documentation complies with design criteria/Client brief/Approved concept/Standard.
• Liaise/attend clients, architects and site meetings.
• Maintain and check for completeness record, etc.
• Resolve any technical problems faced during the project design and/or construction stages.
• Other ad-hoc assigned by Director.
• At least 5 years of working experience in the construction industry.
• Candidate must possess a least bachelor's degree/post graduate diplima/professional degree in Engineering Mechanical or equvalent.
• Relevant project experience in HVAC/ACMV/MEP system both in design and project management.
• Strong knowledge of M&E installation, current practices, code and authorities requirement.
• Knowledge in ACMV product R&D preferred.
• Knowledge in Auto Cad and BIM preferred.

Job Description:

• Ensure incoming equipment meet the purchase specifications
• Arrange for protection and maintenance of equipment and system
• Review the commissioning work processes to enhance efficiency and productivity
• Review the commissioning work processes to enhance efficiency and productivity
• Coordinate with all sections for testing / commissioning requirements with different stakeholders and arrange for facilities and instruments for the job

Job Requirement:

• Degree/ Diploma in Naval Architecture/ Civil/ Marine & Offshore/ Mechanical / Electrical / Chemical Engineering / Certificate of Competency (Marine Engineer Officer) Class 1 (Motorship), or its equivalent
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position.

Working hours & locations:

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon to Thurs: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte Ltd and our group of companies, shall be used for the purposes of evaluation and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering(Civil) or equivalen.
• At least 2 years(s) of working experience in the related field is required for this position.
• Required Skill(s): Understand drawing, Quantity take off, Prepare BQ, Familiar with costing, Supplier sourcing, Contract administration.
• Preferably Senior Executive specialized in Engineering-Civil/Construction/Structural or equivalent.
• Familar with structural steelworks.
• Other QS duties as assigned from time to time.

Job Description

• Identify and evaluate problems / root cause of process inefficiency.
• Identify and source for the potential improvement method to improve process efficiency (Safety, Quality, Cost, Delivery and Environmental).
• Lead Project Team (Engineers and Technicians) on process improvement and development activities assigned.
• Develop process digitization concepts and drive big-data analytics for process knowledge improvement.
• Work closely with relevant departments for process improvement and breakthrough projects.
• Present and manage project progress, cost and completion deadline according to schedule.
• Any ad-hoc duties as assigned.

Job Requirements

• Degree in Metallurgy, Materials Science / Engineering, or equivalent with more than 3 years of relevant experience (Experience in Steel / Aluminum metallurgy and Heat Treatment is preferred).
• Diploma in the above-mentioned fields with more than 6 years of relevant experience.
• Knowledge of manufacturing processes and IIOT solution deployment is preferred.
• Preferably Sound knowledge in Process Improvement Methodology.
• Willing to travel; Willing to station 3-12 months in other countries subjected to project requirements.

Permanent, Full Time

We are seeking candidates with:

· A diploma/degree in Marine & Offshore Engineering, Mechanical Engineering, or Electrical Engineering.

· At least 2 years of experience in Engine Repair & Maintenance.

· Fresh graduates are welcome, and the company will provide training.

Roles & Responsibilities

· Perform the repair, maintenance, or overhaul of marine diesel engines 2 & 4 stroke under the supervision of Engineer / Technicians.

· Comply with all the requirements to carry out the jobs in the shipyards or anchorages.

· Lifting and shifting heavy components of engine back to the workshop for repair/reconditioning and vice-versa.

· Ensure prompt response and smooth communication with the customers

· Perform other tasks as may be assigned by the Operation Manager

Job Requirements:

· Relevant marine / mechanical / engineering qualification

· Hands-on experience in trouble-shooting, maintenance and repair is an added advantage

· Candidates with no experience may apply as apprentices as training will be provided

· Willing to work in a shipyard/anchorage environment

· Able to work overtime as and when needed

An attractive remuneration package and career growth opportunities await the successful candidates. Interested applicants are invited to email with detailed resumes indicating their current and expected salary.

JOB HIGHLIGHTS

· Cutting Edge Internet-of-Things and AI Technologies

· Open Source and Maker Culture

· Friendly Working Environment

JOB DESCRIPTION

· Realtek is one of the leading fabless semiconductor design companies in the world, with this position, you will get to play a role in value-add to the latest Realtek wireless communication IC product line.

· You will develop software and firmware for the state-of-the-art Internet-of-Things microcontrollers, writing tools, automation, and build systems.

· You will also work closely with the hardware, driver, test, and marketing team to be exposed to the entire product designing cycle.

· You will have the chance to prototype your ideas and make them public through social media, workshops, and events.

· You will be able to follow the latest tech trend and learn new skills when working with cutting-edge technologies.

ROLES & RESPONSIBILITIES

· Be a part of a team that maintains, implements, and validates embedded software for Realtek's latest IoT SoCs

· Design application-level middleware to simplify the customer development process

· Port new features, capabilities, and platforms to Realtek IoT SoCs

· Prototype innovative IoT applications using various network protocols, tools, and open source software

· Debug and fix peripheral, wireless connectivity(Bluetooth, Wi-Fi, etc.), and network-level issues

· Collaborate with third parties for hardware and software projects (ARM, SeeedStudio, Sparkfun, Adafruit, AI-Thinker...)

· Online & offline event organization with groups, institutes, and local universities

· Content creation and social media marketing strategy based on Realtek IoT solutions

· Community management and customer support

JOB REQUIREMENTS

· Bachelor’s degree or above in Computer Engineering, Electrical Engineering, or other related majors

· Fresh graduates are welcome to apply

· Experience with C/C++ and a scripting language(Python/Bash/etc.) is a must

· Experience with embedded system drivers, peripherals, computer networks, wireless connectivities, and open source development platforms (Arduino, PlatformIO, etc.)

· Experience with TinyML and/or AIoT-related development is a bonus

· Experience with video editing and content creation

· Willingness to learn new technologies and ability to follow the latest software and electronics trend

· Good Communication and Teamwork Skills

Do you want to be part of the team that revolutionizes the resource exploration and navigation industry? Atomionics is working on quantum sensors based on cold atom interferometry where atoms are cooled down to almost absolute zero using lasers. At such cold temperatures, these atoms start behaving like waves, which allows us to precisely measure the forces acting on them.

This opens up a wide range of applications including, but not limited to, paving a path in the energy transition to zero-carbon, exponentially improving the performance of inertial navigation systems, and transforming the global positioning system. At Atomionics, you will get the chance to prototype, test, refine, finalize, and produce your designs toward making our devices compact and robust for field deployment with the only constraints being power and your imagination.

We are looking for an electronics engineer who:

1. Wants the freedom to innovate by being involved in deep tech research
2. Is excited by the prospect of working within an interdisciplinary team comprised of mechanical engineers, physicists, and software engineers
3. Would like to own their work via compelling equity offerings

We are a small, focused group in a high-energy environment. Our team consists of people at the top of their domains with a diverse set of experience, such as in advanced rocket engines, the first digital cameras, and high-resolution microscopes, apart from cold atom physics. In addition, we are backed by some fantastic investors from the private and public sectors, such as Wavemaker, SGInnovate, Cap Vista, 500 Startups, and other prominent angels.

Responsibilities

• Lead project development from hardware specifications, manufacturing methods and procedures, and manufacturing quality
• Design architecture to manage size, weight, and power of cold atom sensors to target specifications
• Propose new innovative solutions and technology

Must have skills

• Analog and digital design
• Microcontroller/microprocessor and FPGA based design, interface SPI, I2C, RS232, Parallel, USB, CAN, and SATA
• Schematic capture and PCB design layout
• Prototyping and debugging of boards
• Strong interest in and passion for technology

Nice to have skills

• Knowledgeable in RF test methodologies of RF modules and the use of RF test equipment
• Knowledgeable in solid-state and fiber-based lasers
• Knowledgeable in high power switching power supply and battery management
• Leads and owns projects
• Expertise in emerging technologies

Digital Trust Centre (DTC) is looking for a candidate to join them as a Research Engineer II.

Key Responsibilities:

• Conduct cutting-edge research in large language models, translating theoretical algorithms, frameworks, and methodologies into practical, working prototypes that demonstrate potential product applications.
• Collaborate closely with researchers and engineers to design and implement system architectures and software solutions that transition research findings into scalable, deployable products.
• Develop and build tools and frameworks to facilitate the transfer of LLM capabilities to industry partners, showcasing the practical value and impact of the research outcomes.
• Create and maintain comprehensive technical documentation, including white papers, presentations, and tutorials, to disseminate knowledge to a broader audience and enhance overall expertise in these emerging areas.
• Engage with international research communities and partners to stay abreast of the latest advancements in machine unlearning, contributing to discussions, collaborations, and initiatives that elevate Singapore’s position in the global AI and privacy research landscape.

Job Requirements:

• Minimum Masters’s degree in computer science/ engineering or related fields.
• Proficiency in Python is a must. Experience with other programming languages such as Java, C/C++, or Go, and frameworks like PyTorch or TensorFlow, is highly advantageous.
• Experience in developing and deploying machine learning models, particularly in natural language processing (NLP) and large language models (LLMs), including tasks such as data preprocessing, feature extraction, model training, and evaluation.
• Strong knowledge of machine learning and deep learning techniques, including knowledge graphs, machine unlearning, and AI testing.
• Proficiency in working with common Linux distributions (e.g., Ubuntu, CentOS) and familiarity with shell scripting and command-line tools.
• Experience with cloud platforms (AWS, GCP, Azure) and containerization technologies (Docker, Kubernetes) is a must.
• Experience with version control systems (e.g., Git) and collaborative development tools.
• Experience in developing ML systems from end to end, including data exploration, feature engineering, model training/evaluation will be advantageous.
• Ability to communicate complex technical concepts effectively to both technical and non-technical stakeholders, bridging the gap between research and practical application.
• Strong analytical and problem-solving skills, with a focus on developing innovative solutions for LLMs.
• Self-motivated and able to work independently, managing multiple tasks and projects in a fast-paced environment.
• Strong collaborative skills, with experience working in cross-functional teams.
• Keen attention to detail and commitment to high-quality deliverables.
• Understanding of ethical considerations and best practices in AI research, particularly concerning data privacy and security.
• Ability to code-switch effortlessly between talking business and talking tech, and can help stakeholders, engineers, and businesses easily understand difficult research tech concepts.
• Experience in AI model testing methodologies, including robustness, fairness, and explainability assessments, as well as understanding data privacy and security considerations in AI.
• Good understanding of relational database and Unix shell scripting skills.

We regret to inform that only shortlisted candidates will be notified.

JOB DESCRIPTION

· Define the architecture and design specification for in house video encoder and decoder, according to market requirement.

· Make assessment of the video encoder quality, either in house design or licensed IP.

· Work with IC design team to resolve the issues during design phase.

· Create test plan for the video encoder and decoder and qualify the design.

· Work with software team to develop the driver for the video encoder and decoder.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with IC design background

· Familiar with video compression technology, such as MPEG4, H264, H265, MPEG5, etc.

· Familiar with video quality assessment.

· Familiar with video encoding algorithm and video decoding compliance test.

· Familiar with architecture of video encoder and decoder RTL design.

· Knowledge in video/image pre and post processing is an advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

JOB DESCRIPTION

· Understand the product requirement and create SOC system level architecture according to the requirement.

· Understand the use case and create system level test plan.

· Define design specification for new hardware modules, together with IC design engineer.

· Work with IC design engineers to resolve the issues during design phase and qualify the design.

· Understand the design specification of existing hardware modules and make improvement.

· Perform FPGA validation before tape out and silicon verification after tape out

· Provide support for any issue reported from customer.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with firmware development experience Familiar with SOC design, including bus architecture, memory sub-system, video signal processing, etc.

· Familiar with standard peripherals, such as UART, I2C, SPI, I2S, PWM, SD, flash controller, etc

· Familiar with IC design activities, such as RTL coding, timing analysis, etc.

· Familiar with lab equipment

· Knowledge in WIFI/Bluetooth physical layer or MAC operation is an advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Your Job

As a Test Engineer, your primary purpose is to drive quality, yield, and productivity improvements. You will manage the new product release to manufacturing and address any problems affecting the smooth operation of parts. You are responsible for all testing activities related to the transfer of new testers from the design center to the manufacturing plant, including working with the design team to qualify new test systems and propose test limits. Your role also involves sourcing and assembling tester components locally, setting up, and debugging test software and hardware.

Our Team

You will be part of the Data-Com and Specialty Solutions Division, reporting to a Senior Engineer, Principal Engineer, or Department Manager. In this role, you'll collaborate closely with a variety of contacts, including assembly subcontractors, vendors, suppliers, QA Engineers, and Product Design Engineers. This teamwork ensures the seamless integration of innovative solutions and product designs in production processes.

What You Will Do

• Responsible for all testing activities related to new tester transfer from design center to manufacturing plant. Work with design team qualifying new test system, proposing test limit.
• Sourcing, assembling all tester components locally, set up and debugging test software and hardware.
• Tester maintenance for on-line/off-line High-Performance testers, Cirris, BERT, OCR, Robert, etc.
• Perform electrical testing, high speed tester support used in the manufacturing of High-Speed cable assemblies based on standards such as Ethernet, Infiniband, Fibre Channel, PCIe, SAS, SATA, etc.
• Integration of custom designed circuit boards and mechanical fixtures with off-the-shelf test equipment such as digital sampling oscilloscopes, TDR modules and network analyzers.
• Integrate software upgrades into high-speed test systems. Work closely with design centers on software improvement feedback to improvise the system for better solutions.
• Perform electrical testing of High-Speed cable assemblies, analyze test data using statistical modeling tools, identify critical to quality aspects of product design and manufacturing process, perform root cause / corrective action analysis, and provide reports to summarize findings.
• Work closely with multifunctional teams to upgrade globally deployable automated production test systems for cable assembly products. Maintain records for project execution, schedule, and budget. System design includes activities such as mechanical fixture design, PCB design, hardware integration, software development, system documentation, performance testing and characterization, etc.
• Create and execute test plans, conduct software reviews, perform system verification and validation, analyze, and resolve failure modes and document the results.
• Create product and test system documentation, specification, and work instructions
• Introduction of new solutions / technologies in the design of production processes.
• Adherence to procedures related to system management of quality, health, safety and environmental.
• Perform work in accordance with the standards of personal and professional integrity as described in the Code of Ethics and Business Conduct. To comply to PBM Guiding Principles for the job carry out under his responsibility.
• Perform other related duties as assigned by Management.

Who You Are (Basic Qualifications)

• Possess a degree or diploma in Mechanical, Manufacturing, Production Engineering, Systems, or Computer fields.
• Minimum of 2 years of experience with test equipment and measuring instruments.
• Proficient in compiled programming languages such as C/C++ or VB/C# within the Microsoft .NET framework.
• Skilled in using scripted programming languages like Python.
• Strong analytical ability to apply logical reasoning, test assumptions, observe results, and make corrections.

What Will Put You Ahead

• 2-5 years of progressive engineering experience with a robust understanding of high-speed testing and design.
• Extensive experience with RF/microwave test and measurement equipment such as digital sampling oscilloscopes, TDR modules, and network analyzers.
• Knowledge of RF/microwave transmission line theory, including s-parameters, Fourier transforms, and characteristic impedance.
• Experience with relational databases using software like Microsoft SQL or MySQL.
• Exposure to RF/microwave circuit design and PCB layout with tools like Mentor Graphics PADS or Cadence Allegro, and familiarity with advanced PCB fabrication methods.
• Training in Lean/Six Sigma methodologies with an understanding and application of tools such as control charts, process capability, and gage R&R.

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.