· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

Geotechnical:

- Experienced in the design and design management of major earth retaining and stabilizing structures, deep foundations, reclamations, ground improvements, slope stabilities.

- Familiar with the preparation of Geotechnical Interpretative Reports.

- Familiar with the geotechnical impact assessment of structures and instrumentations.

- Familiar with the application of geotechnical FEM software.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

· Preparation of design report, calculation, drawings, specification, cost estimates and schedules for project assigned

· Management of preparation, liaison, and follow up with authority submission and approval.

· Liaison with client, architects, QS and other project consultants throughout the duration of projects.

· Supervise and guide employees assigned to the projects

· Role as project manager

· Implementation of QA/ QC

· Any other duties as assigned

Requirements:

· Degree in Electrical Engineering from a recognized University and eligible for registration with the Professional Engineers Board

· Professional Engineer Certification will be an advantage

· At least 6 years of working experience in engineering design consulting practice on mechanical projects.

· Good project technical knowledge and design softwares

· Good project management and technical skills

· Familiar with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Team player and able to work independent with minimum supervision

· Able to work under pressure with good time management skill

· Good analytical skills would be preferred

If you wish to have the opportunity to work in an international consultancy firm which offers attractive remuneration, a 5-day week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park #06-08

The Strategy Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified.)

Tasks:

● Develop and implement navigation algorithms for autonomous robots, including

localization, mapping, and path planning.

● Integrate sensor data from various sources (lidar, cameras, IMUs) to improve robot

perception and navigation capabilities.

● Work with simulation tools to validate and debug navigation algorithms in a virtual

environment.

● Collaborate with other team members to ensure overall system integration and

functionality.

Education:

● A bachelor's or master's degree in Robotics, Computer Science, Electrical

Engineering, or a related field is typically required.

Technical Skills:

● Robotics: In-depth understanding of robotic systems, kinematics, dynamics,

and control theory.

● Navigation algorithms: Proficiency in developing localization, mapping, and

path planning algorithms for autonomous robots.

● Sensor fusion: Experience with integrating data from various sensors (such as

lidar, cameras, IMUs) to improve robot perception and navigation.

● Linux, ROS, C++ and Python are your thing and you are familiar with modern

software development processes.

● Simulation tools: Experience with robotic simulation frameworks like Gazebo

or V-REP.

● Problem-solving and analytical skills: Strong analytical and problem-solving

abilities are vital for identifying issues, debugging complex systems, and

proposing effective solutions.

● Communication and teamwork: Excellent verbal and written communication

skills to collaborate with cross-functional teams, document technical

specifications, and present findings effectively.

Experience:

● Robotic navigation: Prior experience in developing navigation systems for

autonomous robots, including localization, mapping, and path planning.

● Sensor integration: Knowledge of integrating sensors like lidar, cameras, or

IMUs into the navigation system.

● ROS: Practical experience with the Robot Operating System (ROS) for robotic

software development and integration.

Endress+Hauser is a global leader in measurement instrumentation, services, and solutions for industrial process engineering. We provide process solutions for flow, level, pressure, analytics, temperature, recording and digital communications, optimizing processes in terms of economic efficiency, safety & environmental impact.

Our customers come from various industries, including chemical, food & beverage, life sciences, power & energy, mining, minerals & metals, oil & gas, and water & wastewater. Although we employed close to 16,000 individuals worldwide, we remain a family-owned company and family-owned companies are different. We believe that competent and motivated employees are the crucial factor for future success.

Become part of our team and write the next chapter in this success story with a career at Endress+Hauser, "Driving Progress Together".

Key Responsibility

• To work closely with sales, service, and industry managers in a team approach to serving customers. To perform out-door sales activities to achieve the agreed sales targets.
• To promote and develop existing customers in Singapore for Endress+Hauser products, services and solutions in the industries assigned to your team.
• To provide customer service, build and maintain good customer relations, solve problems, attend to complaints, and provide effective customer support, to achieve the best customer experience from end-to-end.
• To develop sound customer relationships at all levels and keep the accounts plan and forecast regularly updated in Salesforce Lightning CRM.
• To work closely with colleagues internationally, joining our global network to ensure the best of service to our customers and to be an active participant in Kaizen and Lean projects.
• To respond to and follow up on customer enquiries and specifications for products and systems or packages based on E+H products, services and third-party suppliers and pass on clear instruction to Internal Sales Engineer to prepare quotations and proposals in SAP, in a timely manner.
• To be responsible for sales functions, like customer visits, product demonstration, negotiations, complaint handling, providing technical assistance and advice, following up of quotations, closing orders and customer liaison.
• To assist in marketing activities, like exhibitions, seminars, presentations, direct mailing, etc.
• To assist service department in satisfying customers’ after-sales and commissioning service requirements, where applicable.
• To execute agreed strategic plans in an organized way.
• To promote digital sales and meet/exceed assigned targets.
• To be always polite and customer oriented

Requirements

• Diploma in Electrical engineering or its equivalent
• At least 3 years' relevant experience.
• Experience in Sales/Business Development, Project Management or Engineering related industry
• Proven sales records of achieving sales target.
• Knowledge of SAP and Salesforce will be an advantage

1. Need to arrange suitable workers

2.Nee to arrange the materials

3.site visit and supervise the works

4.daily report need to submibt

Job Responsibilities

• Responsible for equipment technical management and electrical operation management of electrical, instrumentation and DCS.
• Responsible for keeping records of various electrical instrument operations, equipment defect records, etc.
• Implement the company's various goals and indicator management plans, conduct production operation analysis and reduce power consumption.
• Assist operating personnel in training to prevent the occurrence of various operating accidents.
• Responsible for revising and adapting the operating procedures and technical materials of the electrical major, and responsible for the review and archiving of electrical work tickets and operation tickets.
• Carry out accident investigation and analysis work in the electrical profession.
• Responsible for formulating electrical maintenance and technical improvement plans.
• Responsible for the company's electrical inspection and maintenance management, and be proficient in the daily inspection and maintenance of DCS systems, networks, cameras, instruments and other electrical equipment.
• To carry out price and analysis and conduct purchase or contract negotiation with vendor and ensure the materials are acquired at best pricing
• Responsible for the formulation, implementation and internal assessment of 7S standards for electrical instrumentation.
• Any other duties and responsibilities to be assigned by Supervisor, HOD and the Management from time to time within the JE Group.

Job Requirements

• Diploma or Degree in Degree in Electrical, Mechanical, Instrumentation engineering or the equivalent.
• Minimum 3 years’ experience on mechanical maintenance of waste management preferred.
• Good communication skills
• A good team player
• problem solving skills
• Working Area: Tuas South Avenue
• Experience in Power Plant industry is an advantage

Project Engineer Job Description

We are looking for a dedicated project engineer to assist with the scheduling, planning, forecasting, resourcing, and managing technical activities to ensure project accuracy and quality. The Project Engineer is responsible for the engineering and technical disciplines of ongoing projects and will establish inspection criteria for the proper implementation of all the elements of a project.

To be a successful project engineer, you should have the ability to work with multiple discipline projects and demonstrate excellent project management and supervision skills. You should also have excellent organizational, time management, leadership, and decision-making skills.

Project Engineer Responsibilities:

Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.

Formulating project parameters and assigning responsibilities to the most capable

employees and monitoring the project team.

Interacting with clients, interpreting their needs and requirements, and representing them in the field.

Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.

Cooperating and communicating with the project manager and other project participants

and collaborating with senior engineers to create more efficient project methods and to maintain the project's profitability.

Reviewing the engineering tasks and initiating the necessary corrective actions.

Developing specifications for the project's needed equipment.

Creating frameworks to measure the project's metrics and data collection.

Establishing field test methods and methods for monitoring the quality of those tests.

Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.

Project Engineer Requirements:

Degree in engineering or a related field.

Minimum 3 or more years' field and project experience.

Excellent computer literacy and knowledge of design and visualization software.

The ability to work with multiple discipline projects.

Excellent project management and supervision skills.

Excellent organizational, time management, leadership, and decision-making skills.

Strong written and verbal communication skills.

Knowledge of applicable codes, policies, standards, and best practices.

Need to have engineering knowledge, comprehension of technical documents. Excellent written and spoken communication skills • Possess troubleshooting skills in engineering works • Proven leadership skills with a large and diverse workforce o Be able to work in a fast-moving environment, under pressure and long working hours, when needed.

We are looking for an energetic, trustworthy, and self-starter candidate who could be handy in paperwork preparation and supervision at the worksite, overseeing projects, maintaining safety protocols, and implementing site procedures. Our ideal candidate is experienced, responsible, and team-focused.

A Service Engineer’s responsibilities typically include installing, maintaining, and repairing machinery and equipment, ensuring optimal performance and customer satisfaction.

Job Description :

1. Equipment Installation: Assist in the installation and setup of various equipment at client sites.

2. Routine Maintenance: Perform scheduled maintenance checks on machinery and equipment to ensure optimal performance.

3. Troubleshooting: Diagnose and resolve technical issues promptly to minimize downtime.

4. Customer Support: Provide technical support to customers, address and resolve customer inquiries and complaints in a timely manner.

5. Quality Assurance: Ensure compliance with company quality standards and regulatory requirements during service operations. Adhere to all health and safety regulations and ensure compliance with industry standards.

Job Requirements :

• Diploma or degree in Mechanical Engineering, Electrical Engineering, or a related field.
• Minimum of 5 years of experience in crane service engineering or a related field.
• Familiar with hydraulic system & machinery electric system and understanding the hydraulic system theory.
• Basic knowledge of diagnosing defects and repair mechanical equipment such as heavy crawler crane, excavator or drilling rig, etc

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Miniumum 1 year of working experience in contruction industry.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall produce and review all design deliverables, including design specifications, schedules, drawings, and calculations, and have a comprehensive knowledge of CAD and BIM design.
• The candidate shall review clients' or third-party designs and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall challenge client asset standards where a clear opportunity exists to use an alternative, cost-effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX
• Preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The candidate shall have about 8 years of experience in mechanical design works, preferably with contractor experience in water and wastewater industry
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be advantageous, by reviewing pump calculations, hydraulic calculations, P&IDs, Process Flow Diagrams and technical specifications
• General experience in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Help us get ahead of disease together with our GSK Biologics Tuas Business Area

Education required: BS degree from an accredited college/university, preferably in Mechanical or Chemical Engineering discipline with a focus in Process equipment reliability and maintenance

Language requirement: Written and spoken fluency in English

Expected Start date: Immediately

Application deadline: We will close this vacancy when we have enough applications, so please apply as soon as you can so your application can be considered.

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals

What will you do?

Involve in and not limited to:

Maintenance and Calibration Project, Improvement in process reliability, Equipment troubleshooting, Qualification of new equipment, SOP amendment due to periodic review/CAPA and Continuous improvement Programme.

What will you learn?

You will be expose to but not limited to:

• The different type of equipment that are used for Vaccines manufacturing.
• How the equipment functions and the impact of each equipment have on the production system.
• Liaising with external contractors and vendors for equipment issues and projects.
• Liaising with above site (GSK sister plant outside Tuas) for sharing issue or requesting for support.
• Working closely with quality and production department on understanding problems that are contributed by process equipment.
• Understanding and using the different type of modules in SAP for routine and ad-hoc activities.
• Deeper understanding the requirements of a Vaccines site on producing vaccines.

What are we looking for?

• A lively interest in vaccines manufacturing, the commercial world and the biopharma industry
• Appetite to work as a business partner, building strong relationships with key stakeholders
• Adaptability to change and working under pressure
• Excellent communication skills that help you influence
• Strong problem-solving skills driven by curiosity
• Drive and confidence to trust your own judgment
• Great project management skills and the ability to prioritise

What do we offer you?

• Understand and experience the GSK Culture
• Work with a diversified team of professionals
• Implement technical knowledge and skills that you have acquired at school
• Apply and develop soft skills such as interpersonal, communications and negotiation skills
• Transport to and from site to MRT stations in centralised locations all across Singapore (only for manufacturing sites)

Details:

Our client is a significant player in providing completed integrated telecoms for the offshore/onshore oil and gas industries. As a recognised telecommunication system integrator in the oil and gas global market, they provide turnkey project systems that cover a full spectrum of services in the areas of engineering design, project management, supply, integration, installation, testing, commission, and maintenance.

Reporting to the Engineering Manager, the systems engineer will provide engineering design, technical configuration, and various telecommunication system drawings.

Salary: $3800 - $5500

Job Description:

1️⃣ Lead engineering design, ensure thorough understanding of client requirements to propose optimal solutions

2️⃣ Prepare engineering documents (VDRL) and address client feedback promptly with high quality and accuracy

3️⃣ Create preliminary drawings and guide AutoCAD drafters in producing engineering deliverables

4️⃣ Incorporate industry standards and best practices into design, drawing preparation, review, and submission

5️⃣ Supervise equipment assembly, cabinet integration, system configuration, simulation, testing, and verification

6️⃣ Provide in-house training for client and commissioning engineers

Requirements:

1️⃣ Minimum Diploma in Engineering (Electronics, Electrical, Mechanic, Marine & Offshore) or possesses technical knowledge about Maritime communication systems

2️⃣ Experience in a similar role within the industrial markets

3️⃣ Experience as an ex-sailor, Ex-Radio Officer, or Ex-Navy personnel are added advantage

4️⃣ Well-organised documentation and time management skills

5️⃣ Ability to articulate and share concepts with customers and suppliers

6️⃣ Knowledge of AUTOCAD will be an added advantage

7️⃣ Site commissioning/radio surveying experience as per SOLAS / MODU (Not a must-have but good to have)

8️⃣ Ability to use various coverage tools such as CadnaA for PAGA, Ekahau for WIFI coverage, and iBwave for UHF/GSM coverage (Not a must-have but good to have)

⭕️ Please send your updated resume to: berrylim(at)rapidrecruitmentasia.com

For quicker response, please contact me (Berry) directly at:
Telegram: (at)Berryseisei or HP: (at)+65 92472216

Rapid Recruitment Asia Pte Ltd (16C8261)
Berry Lim (R23117685)

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 5 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for company ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

This is a newly created role and we are looking for candidate who has start-up experience in Ship Repair Mechanical functions.

Job responsibilities

• Leading the team of mechanical technicians and common contractors workers
• Oversees and support the execution of ship repair mechanical projects
• Set up and train the mechanical team of technicians to establish an effective,flexible and reliable support base

Job requirements

• GCE 'O' level or at least 5years of supervisory with start-up experience in Ship Repair industry
• Must be comfortable to work in shipyard environment
• Candidate with relevant working experience will be preferred

Job Description:

• Aggressively build, maintain and grow accounts & relationships with key clients to achieve sales earnings and management established targets & objectives
• Grow products sales revenue and earnings per client
• Create, identify and solicit aggressively new project potentials by proactively sourcing for sales opportunities
• Identify, Qualify, Present, Negotiate and Close complex deals
• Build and maintain strong relationships with major clients and trading partners
• Tender preparation / assessment of commercial viability to bid, review technical requirements, customer specification review, best vendor assessments, deriving costing estimates, product / vendor sourcing, commercial negotiations
• Maintain high level of customer satisfaction by following up closely with inter-departments, customers & vendors during pre-sales, order, or post -sales processes to deliver end results effectively
• Sales forecasting, project coordination, after sales support, sales presentations
• Participate in trade shows, exhibitions and conferences
• Prompt submission of reports
• Provide product on networking and data-communication products/solutions within an industrial application environment
• Developing solutions, design & consultancy
• Providing pre-sales advice and consultancy on systems
• Interface with principals on technical aspects of products and solutions
• Manage, develop, build and maintain strong relationship with principals and partners on focal products/solutions under its charge
• Keep abreast of new developments and innovations and/or improved related product applications in areas of responsibility
• Additional role may be assigned by management from time to time.

Job Requirement:

• Diploma or Higher in electrical & electronics engineering or equivalent
• At least 1 year of relevant experience in BD or sales role
• Experience in IT industry or related industries an advantage
• Knowledge of industrial & commercial telecommunication systems and its applications
• Experience in the promotion of industrial and/or telecommunication systems, with proven track records in securing projects related to Telecommunication Solutions (such as network, ex-proof and electrical products)
• Technical experience with industrial and/or telecommunication systems and good understanding of equipment specification is an advantage.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

Zen Career Pte Ltd | 24C2559
Wong Kaili (Kylie)| R21100484

Responsibilities:

• Involved in technical reviews and clarifications with customer and suppliers.
• Involved in coordination of design with other engineering disciplines.
• Involved in all electrical engineering designs, calculations, preparing bill of materials including measurement and sizing, and liaise with customer and suppliers for any engineering query.
• Involved in design and construction document preparation and submissions.
• Involved in construction, installation, testing and commission activities.
• Able to use autocad/drafting software and also guide drafters for drafting

Requirements:

• Good team player. Can work with others harmoniously.
• Willing to learn new activities.
• Good communication skills in English both written & spoken.
• Must know basic electrical design knowledge.
• Know how to do electrical cable sizing, voltage drop, cable gland sizing and cable schedule.
• Know how to do lighting calculation and can operate lighting software like Dialux.
• Know how to do overcurrent protection device sizing and selection.
• Know how to do electrical equipment installation.
• Must know how to operate and draw in AutoCAD.
• Must know basic fire and gas detection knowledge.
• Must know how to operate MS office (minimum Word and Excel).
• Prepared to travel if required for overseas meeting
• Min Diploma/ Degree in Engineering or related field.