Job Description

• Plan and monitor Mechanical section on the manpower, equipment and resources
• Prepare construction specification in coordination with vendors for critical items and finalize installation procedures
• Prepare method of statements for Mechanical document submission on project basis
• MOS preparation and JSA arrangement for lifting and other site activities
• Study scope of work and documents concerning mechanical items / equipment
• Raise purchase requisition for the project required consumable and hardware items & sub-contractor works
• Liaise with Clients representatives, classification society surveyors and others to comply with inspection requirements
• Initiate and promote safety programs along with safety department like monthly safety committee meetings, JSA meetings, RA meetings etc
• Instruct foreman / subcontractors on a day-to-day basis for work progress
• Monitor progress; instruct supervisor and foreman on safety and quality matters
• Maintain the file copy of all latest revision drawings, approved procedures, clients Site Instruction, Project specification, JCS/JCF and prepare timesheet Form-A & Form-AA, Raised AFI and Client signed reports for Material receiving inspection and Mechanical works for internal and external audits
• Resolve any technical problems or issues faced at the work site
• Keep records of all works done
• Liaise and coordinate with other departments on project issues

Jobs Requirement

• Degree/Diploma in Mechanical Engineering or equivalent
• Minimum 8 years of experience in Marine Shipyard operations
• Able to perform HVAC activities encompass a wide range of tasks related to the installation, maintenance, repair, and optimization of HVAC systems
• Highly motivated individuals with good organizational skills and leadership skills
• Able to adapt new work environment and able to lead independently
• Active and positive minded
• Proficient in MS Office applications (ie. Microsoft Excel)

Job Descriptions:

• To ensure all the maintenance works carried out systematically, efficiently & safely.
• By improving existing preventive maintenance system thus reduce maintenance cost and improve performance of equipment.
• To be the initiator and coordinator of MOC for any addition, modification and replacement in the system.
• To assist the Section Manager and Supervisor to co-ordinate and supervise the day to day activities.
• To troubleshoot Mechanical Equipment / Systems’ problems when it runs abnormally malfunction.
• To work closely with the operation team for daily, weekly and monthly maintenance programmed to maintain all equipment running efficiently, safely and smoothly.
• To train all technician and staffs on equipment maintenance and monitor the 5S and TPM activities carried out in the section.
• To assist the Section Manager to propose and implement action plans to rectify faults occurring in the system/processes.
• To be involved in new project management time to time and be responsible for document preparation and other paper works, as well as co-ordination with contractors & Vendors.
• To manage all Mechanical & electrical Instruments spare parts and tools.

Job Requirements:

• Bachelor Degree in Mechanical Engineering
• Self-motivated, able to work independently and with a team to completion of tasks

Remuneration:

• Working hours - Monday to Friday: 8am to 5pm ,Alternate Saturday: 8am to 5pm
• Company Transport / Transport Allowance $120 if possess own transport
• AWS
• Performance Bonus
• Medical Benefits
• Sign-on Bonus

1. Promote and practice 5 "S" and the QEHS system procedures.

2. Take corrective steps on non-conformities which are reported and to solve the problems which impact the quality and delivery of service and products.

3. To counsel subordinates who violate company rules and regulations.

4. Lead team of men for site works as required.

5. On time delivery.

6. Promote & drive continual improvement programs.

7. Mentor new fitters and give guidance to update others on technological changes in our portfolio

To be successful in this role, we expect you to have:

• Supervisory Capacity with Minimum 5 years of Experience in Anchorage Engine works

• Knowledge & Experience of job cards

• Hands-On knowledge and experience in assembly/disassembly of engines

• To oversee packing standards to ensure compliance

• To conduct tool-box meeting with subordinates to disseminate information and instructions

• A diploma in marine engineering with shipyard experience

• Fruitful and Meaningful relationship with our customers

• A good attitude with willingness to learn

As a mechanical engineer, your responsibilities can vary based on the industry and specific role, but they generally include:

1. Design and Development:Create and refine mechanical systems and components using CAD (Computer-Aided Design) software.
   Develop prototypes and test designs to ensure they meet required specifications and performance standards.
   Use engineering principles to solve design problems and improve product functionality.
   
2. Analysis and Testing:Perform simulations and analyses to predict how components will behave under various conditions (e.g., stress, temperature, and load).
   Conduct tests and experiments to validate design concepts and performance.
   
3. Project Management:Plan, coordinate, and oversee engineering projects from conception through completion.
   Manage project timelines, budgets, and resources.
   Collaborate with other engineers, stakeholders, and clients to ensure project objectives are met.
   
4. Manufacturing and Production:Develop and oversee manufacturing processes and procedures.
   Ensure that products are produced efficiently and meet quality standards.
   Work with suppliers and manufacturers to source materials and components.
   
5. Maintenance and Troubleshooting:Monitor and maintain mechanical systems and equipment.
   Diagnose and resolve mechanical issues or failures.
   Implement improvements to enhance reliability and performance.
   
6. Compliance and Documentation:Ensure designs and processes comply with industry standards, regulations, and safety guidelines.
   Prepare detailed documentation, including design specifications, reports, and user manuals.
   
7. Research and Innovation:Stay updated with advancements in mechanical engineering and incorporate new technologies into designs.
   Conduct research to explore new materials, techniques, and systems.
   
8. Collaboration and Communication:Work with cross-functional teams, including electrical engineers, software engineers, and project managers.
   Communicate technical information clearly to non-engineering stakeholders.
   

These responsibilities can vary significantly depending on the specific sector, such as aerospace, automotive, manufacturing, or energy.

You will be leading the mechanical testing laboratory.

- Minimum of 5 years of working experience in mechanical testing.

- Familiarity with international standards related to mechanical testing.

- Ability to work independently and improve job productivity.

- Strong communication and negotiation skills to discuss terms and conditions and update clients on job status.

- Capability to secure new jobs and contracts from clients.

- Lead a team of technicians to ensure jobs are completed on time and meet quality standards.

- Manage regular audits conducted by clients and the Singapore Accreditation Council.

• Perform a full lifecycle product development (design, develop, test prototypes, manufacture and implement)
• Design systems and components that meet needs and requirements
• Produce outline designs
• Conduct experiments methodically, analyse data and interpret results
• Test and evaluate theoretical designs
• Identify, formulate and produce effective solutions to emerging problems
• Evaluate final product’s overall performance, reliability and safety
• Alter and modify design to meet requirements and to eliminate malfunctions
• Estimate budget and scope of project
• Solicit observations from operators
• Prepare product reports and documentation
• Engage in lifelong learning and develop new theories or methods

JOB DESCRIPTION

• Manage projects from conception to completion, including planning, budgeting, and coordinating with cross-functional teams.
• Conduct thorough testing and inspection of mechanical systems to ensure they meet performance and safety standards.
• Provide technical support and expertise to production and maintenance teams, troubleshooting and resolving mechanical issues.
• Prepare detailed reports, technical drawings, and documentation for all projects and maintenance activities.

JOB REQUIREMENTS

• Diploma in Mechanical Engineering or in a related field.
• Must have minimum 2-3 years of electroplating experience
• Minimum 3 years experience in mechanical engineering, preferably in the Oil & Gas, Marine, or Industrial sectors.
• Proficiency in CAD software (e.g., AutoCAD, SolidWorks) and other engineering design tools.
• Strong analytical and problem-solving skills with the ability to troubleshoot problem.
• Excellent verbal and written communication skills.
• Ability to work collaboratively in a team environment, as well as independently when required.

JOB DESCRIPTION

* Design and develop Mechanical Equipment/Systems, keeping in mind budget, timelines and other essential resources.

* Work with a team of Engineers in the creation of new product designs, ensuring alignment with project objectives and timelines.

* Utilized CAD Software to create 3D Models and details drawings for new product development.

* Implemented design modifications and optimizations to streamlne the assembly process.

* Collaborate with cross functional teams including product management, manufacturing and quality assurance to ensure successful product development and launch.

* Troubleshoot problems and devise solutions to resolve them.

* Research and keep up with the Dynamic Technology and trends in the mechanical design spectrum.

REQUIREMENTS

* Degree in Mechanical Engineering.

* Knowledge in dealing with Engineering Drawings and 3D Modelling.

* Experience working with designing software - Solidworks and Autocad.

* Minimum 5 years of relevant working experience as Mechanical Design Engineer.

* Able to work independently with minimal supervision.

* Strong verbal, written and communicatin skills.

* Sound knowledge of Computer Application and Microsoft Office.

* Willing to work on weekends and travel occassionally if required.

Job Description:

You will participate in the specification, design and design maintenance of high-tech mechanic system solutions for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. You are a highly talented and ambitious engineer with a bachelor’s or master’s degree in engineering. VDL offers a dynamic working environment with opportunities to travel abroad. You will participate in the following phases for system (re)design projects:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of mechanical concepts
• Definition Phase: develop Description of System Design Requirements and Specifications
• System Design Phase: generation of system design concepts and reviews

1. Develop well-considered choices, validated against system requirements
2. Definition of high level modules and related technical interfaces
3. Monitor that projects stay within agreed specifications.
4. Make use of your creativity and helicopter view to find solutions in case of conflicts.

• Detail Phase: create 3-D models and drawings
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production
• Production release: release the design for production

Requirements:

• Bachelor’s or Master’s Degree in Mechanical Engineering, preferably with a focus on construction / precision mechanics
• Knowledge of mechanic design principles, accurate positioning, dynamic behavior, material properties, strength and stiffness
• User of 3D design tools (e.g. NX or SolidWorks)
• User of product lifecycle management systems (e.g. TeamCenter or EPDM)
• Basic knowledge of FEA calculations in the area of mechanical design
• Helicopter view, abstract thinking and ability to think out-of-the box
• An effective communicator
• Fluent in English, both speaking and writing
• Willingness to travel overseas and cooperate with the European mother company

Additional requirements for Senior Mechanical Design Engineer:

• At least 5 years of relevant working experience (semicon, precision mechanics, or similar)
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation
• Experience in multidisciplinary projects, knowing dependency between electrical, electromechanical and mechanical (sub)systems
• Proficient in stakeholder management (internal and external) to increase effectiveness and efficiency of the team

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Tasks and Responsibilities

• Assist Section Project Lead in day to day operations.
• Perform the assigned mechanical task under quality and schedule.
• Advise the project’s design mode & standard
• Familiar with Class regulation/rules, product, standard
• Report the project daily discipline (Man-hour/Schedule etc.)
• Able to work with other team members for the overall progress of the project
• Feedback for profession’s design mode & standard
• Train & Guide the other project mechanical engineer (AE or draft man) to work together.
• Study & Solve the project issues under mechanical responsibility
• Attend and report in project and section meeting
• Complete the assigned task for different project drawings or documents.
• Support Project Section Lead in Mechanical Technical issue.
• Coordinate with Shipyard /Consultant / Vendor
• Responsible to Mechanical Project Section Lead/ Mechanical Technical Lead
• Project Handling- New building project, Repair, Upgrading, Conversion project.

Job Requirements

• Minimum 5 years of relevant work experience in the marine/offshore industry Machinery/ Piping new-building engineering design.
• Familiar with Auto-CAD/ Microsoft Office/ AVEVA
• Familiar with Rules and Regulation from Classification Society and Authorities.
• Familiar with theory and calculation of marine/offshore Mechanical & Piping Design.

· Degree in Mechanical Engineering

· Minimum 5 years relative Design Experience in Marine Industry

· Able to independently do calculations, develop ship piping system Engine Room Layouts, HVAC, Shafting, etc

· Able to develop Specifications related to Machinery

· Knowledge of different classification Rules Regulations SOLAS,MARPOL,IMO,MEPC etc

· Able to liase with Class, Owner’s Yard & Clients

· Should have adequate knowledge of pipe routings,

· Knowledge of Piping Standards

· Technically sound and consistently designed and delivered to client’s project requirements

· Preparation of design report, calculation, drawings, specification, cost estimates and schedules for project assigned.

· Assist Professional Engineer in management of preparation, liaison, and follow up with authority submission and approval.

· Liaison with client, architects, QS and other project consultants throughout the duration of projects.

· Supervise and guide employees assigned to the projects

· Role as project manager

· Implementation of QA/ QC

· Any other duties as assigned

Requirements:

· Diploma in Mechanical Engineering from a recognized Polytechnic with more than 5 years of working experience in engineering design consulting practice on Building Services projects

· Degree in Mechanical Engineering from a recognized University and eligible for registration with the Professional Engineers Board with more than 3 years of working experience in engineering design consulting practice on Building Services projects.

· Being a Professional Engineer is an advantage.

· Strong project technical knowledge and design softwares

· Good supervision and project management skills

· Excellent with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Lead team of staff for successful delivery of projects

· Strong analytical skills would be preferred

· Excellent interpersonal, good written and verbal communication skills

· Strong time management and resources management skill

If you wish to have the opportunity to work in an international consultancy firm which offers attractive remuneration, a 5-day week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park #06-08

The Strategy Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified.)

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

About Beca

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are currently recruiting for experienced Senior Engineer – Mechanical (Building Services) to join our Building Services team in Singapore.

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

• Leading mechanical services (HVAC) design for building projects
• Assume responsibility and undertake engineering tasks of increasing scope and complexity
• Responsible for analysis of information, production of design, tenders, proposals and technical report writing
• Assist in coordination of quality assurance and commissioning of designs with other disciplines and other design consultants
• In charge of jobs control, planning, monitoring, progress and job cost reporting
• Communicate effectively with the client, sub-consultants, contractors, and other parties relevant to the job
• Assist in assessment and review of designs prepared by others on behalf of the clients
• Liaise with authorities on plans submission and compliance

Pre-Requisites

• Degree in Mechanical Engineering
• At least 5 years experiences in consulting firm
• Leading roles experience in ventilation & air-conditioning (HVAC, Plumbing & Drainage) design & design management of commercial, healthcare or school projects will be an advantage
• Competent user of relevant engineering software, Building Information Modelling and Navisworks
• Excellent written & spoken communication skills in English
• Able to work independently & exercise initiative
• Excellent delegation and communication skills, which see you enlist the help of others to meet objectives
• A team, client and delivery focused working style

Job Highlights

• Career Advancement
• Medical & Telecommunication Allowance
• AWS, Variable Bonus

Ready to make a move?

We offer a comprehensive career growth and professional development opportunities along with a supportive and caring work environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply online now with your CV.

Please include the following information in your resume:

• Education background
• Work experiences
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

We are seeking talented R&D Engineer to assist with the design and customization of our new/existing Vertical milling machine portfolio. In this role, you will be working closely with the R&D team to create functional design concepts, validate designs, and follow through from design stage to production.

Responsibilities:

• Developing new products and introducing innovative designs for our existing product series.
• Crafting customized machines to meet the unique needs of our diverse customers.
• Nurturing collaboration across various company departments, including Sales, Marketing, Product Management, Production, Supply Chain, Customer Support, etc.
• Mastering the art of designing rigid, high-accuracy structural parts, as well as lightweight components for rapid, high-acceleration applications, working hand-in-hand with our Simulation and Test Engineers.
• Pioneering the development of mechatronic units, integrating Pneumatic, Hydraulic, Servo-electric, and Sensor components to create seamless machine systems.
• Engaging in Concept Design, Structural Simulation, Detailing, Prototyping, Testing, Production, Customer Support, and Monitoring machine performance at our clients' sites.
• Leveraging our dedicated R&D Lab for innovative prototyping.
• Enjoying mentorship from seasoned senior engineers, guiding you on your career path to success.
• Embracing a global perspective by collaborating with an extensive network of Makino R&Ds, Sales Regions, and Key Suppliers.

Requirements:

• Bachelor's Degree in Mechanical Engineering from a reputable university.
• Passion for Product design.
• Excellent Problem-solving skills and able to work hands-on.
• Effective team player who is creative, meticulous, independent and responsible.
• Familiar in 3D modelling software such as SolidWorks and Simulation tools will be an advantage.

Responsibilities:

• Identifies, troubleshoot problems and performs root cause analysis study of equipment failures, recurring breakdown, and equipment defects in order to take effective corrective and preventive
• Liaises closely with Engineering on technical specifications required for machinery fitting, documenting the project requirements for the arrangement of machinery, equipment and system installation work
• Assists with the preparation of procedures, risk assessment, HSE work method statement and etc. under the supervision of senior team members and Project Manager to ensure all the requirements have been fulfilled
• Prepares job-list, work schedule and planning of manpower resources (i.e. yard and contractors) and facilities, working closely with the team members
• Participates in project meeting with Project team members and stakeholders to note on project specifications and report on the status of the work progress
• Liaises closely with HSE department and subcontractors for proper on-site coordination, working with QA/QC team members, owners, statutory and classification authorities on inspection arrangement and compliance review
• Maintains the equipment/ machineries at the workshop and on-board, ensuring the proper working condition, timely calibration, repair, or servicing as required
• Understands emerging engineering practices by participating in educational opportunities, professional organisations; reading professional publications and maintaining personal networks
• Recommends changes to work method/ process by reviewing the workflow and work process to implement changes for improvement and to achieve operational effectiveness and functionality

Requirements:

• Bachelor’s degree in Mechanical Engineering/ Marine Engineering or related engineering disciplines
• Entry Level candidates are welcome to apply (On Job Training will be provided)
• Excellent proficiency in English (written and spoken)
• Must be able to board ships, enter confined spaces with limited visibility and have the ability to climb up and down stairs and/or ladders of varying heights.
• Good in planning, organizing, and interpersonal skills and able to work independently

Working hours & locations:

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide Transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

• Efficient project management, including project scheduling, leading, and coordinating the project team (supervisors, foreman, workers, and subcontractors)
• Liaise with clients, architects, consultants, and main contractors to resolve site issues and ensure timely project execution
• Coordinate workers on site and make accurate, decisive, and prompt decisions related to work matters
• Prepare, check, and submit shop drawings and as-built drawings, ensuring conformance to regulations and client requirements
• Produce detailed manufacturing drawings to implement design solutions to all relevant engineering and quality standards by using SolidWorks and other AUTOCAD software

Purpose and Scope

You will provide mechanical maintenance works to support the operations of the Energy from Waste plant.

Key Roles and Responsibilities

• Plan and schedule corrective and preventive maintenance works. Include liaising with operations, prioritize jobs, mobilize work force, spares and allocate resources
• Lead technicians in implementing in preventive and corrective maintenance
• Trouble shoot critical or major plant issues, participate in Root Cause Analysis (RCA) studies, plant improvement initiative, and drive cost management.
• Implement management initiatives to optimize the assets and seek to continuously improve on the methods, procedures and update with the latest developments in the market by adopting a suitable approach like proactive initiatives viz predictive and preventive maintenance activities and default actions like failure finding, redesign and run to failure
• Review budget, monitor spending against budget. control cost
• Upkeep risk registers, take part in safety walkdowns, implement safety initiatives, and ensure that good safety practices are practiced by all parties’ maintenance work
• Develop and establish maintenance procedures, risk assessment and method statements for all maintenance activities to ensure safe execution
• Ensure that maintenance works, and plant equipment comply with Statutory Requirements
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)
• Other ad-hoc duties as assigned

Qualification, Skills and Experience

• Degree in Mechanical engineering
• Minimum 3 years’ experience in a Power Plant environment or oil & gas industry
• Organized and detail oriented
• Good Team player and able to deliver results within tight deadlines
• Strong interpersonal, communication and presentation skills
• Proactive in keeping up with new technologies and looking for solutions to optimize plant operations
• Independent with initiatives, resourceful and positive altitude
• Possess good leadership skills
• Good attitudes and willing to learn from experienced people
• Willing to conduct literature researches for problem solving and carry out root cause analysis

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

Responsibilities:

• Apply functional specifications and use engineering tools to design hardware for product changes and new development
• Assist in analysis, modification and design of products and services for assigned projects which requires basic knowledge of materials, components, and their applications
• Assist and participate in testing and test results analysis for assigned projects

Requirements:

• Degree in Mechanical Engineering or similar discipline
• Basic skillset should be to design various tools & equipment with latest industry/design codes and analysis
• Knowledge on CAD packages like SolidWorks are preferred

Degree/Diploma in Mechanical Engineering or related fields

Must have minimum Two (5) year work experience in the servicing, maintenance and troubleshooting on the Sewage water network, pumping station and reclamation plant with ancillary system.

Responsibilities

· Manage & Lead engineering team

· Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations to as part of the engineering project team

· Team development

· QA/QC documentation review of engineering deliverables

· Liaison with clients, project managers, architects, contractors

· Resolve any technical problems faced during project design and/or construction stages

· Any other required duties as required by the Project Team.

· Candidate who has knowledge in the application of Bentley BIM models and project scheduling software Primavera P6 will be added as an advantage.

• ITE in Mechanical Engineering or equivalent
• Good technical Knowledge on Mechanical or Electrical and Instrumentation
• Hands-On experience on Pumps (Centrifugal, gear pumps, etc.) and Motors
• Customer service oriented
• Independent and proficient in basic writing skills
• Class 3 driving license is a plus
• Relevant working experience in pumps servicing/repair

• Assist engineers in producing detailed and construction drawings.
• Min. 2-3 years of working experience in mechanical engineering field
• Design and drafting of mechanical arrangement, assembly and details
• Able to work under pressure and meet datelines
• AutoCAD skills and Microsoft Office
• Support the engineering manager on projects as required

As a Mechanical Architect you will be the driving force for the development of high-tech, highly complex systems for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. Starting during the pre-concept phase, you act as a counterpart for the Project Manager within T&D for scoping the project and challenging our customer. While going through the different design phases, you will be the driving force who challenges the feasibility and cost-effectiveness of the proposed design solutions, bringing together the multidisciplinary team on a technical level while acting as a technical counterpart on system level with our customers.

Your responsibilities include:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer.
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of (mechanical) concepts.
• Definition Phase: develop Description of System Design Requirements and Specifications and discuss them with internal/external stakeholders.
• System Design Phase: generation of system design concepts and reviews:
• Develop well-considered choices, validated against system requirements
• Definition of high level modules and related technical interfaces
• Monitor that projects stay within agreed specifications.
• Make use of your creativity and helicopter view to find solutions in case of conflicts
• Detail Phase: supervise the creation of 3-D models and drawings, ensuring (sub)module interfaces meet their respective requirements.
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production.
• Production release: release the design for production.

Requirements:

• Master’s Degree or PhD in Mechanical or Mechatronic Engineering, preferably with a focus on construction / precision mechanics.
• At least 10 years of relevant working experience (semicon, precision mechanics, or similar).
• Extensive knowledge of mechanic design principles, accurate positioning, dynamic behavior, material properties, strength and stiffness.
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation.
• Experienced in multidisciplinary projects, knowing dependency between electrical, electromechanical and mechanical (sub)systems in both the static and dynamic domain.
• User of 3D design tools (e.g. NX or SolidWorks).
• User of product lifecycle management systems (e.g. TeamCenter or EPDM).