• Responsible (review and check) Process Engineer/s and Process Supervisors works.
• Define System Design Deliverables and review with leads to finalise that suit to the project.
• Scope of works to review with leads and get confirmed with client.
• Develop and / or review design documentation as per Deliverable List with leads e.g. Process Flow Diagrams Piping and Instrumentation Drawings, System Layouts, Equipment and Instrumentation data sheets.
• Review and participate in tendering activities (tender preparation, tender interview/clarification meetings, evaluate proposals submissions and Tender Recommendation Report preparation).
• Perform engineering reviews on vendor documentation to ensure compliance and completeness in technical scope.
• Brief Process Engineers/Supervisors on the project scope and ensure system complete on schedule.
• Participate in Risk and Process Hazard Analysis.
• Prepare budget and cost estimations.
• Mentor and provide guidance to Process Engineers in their work.
• Support implementation of Engineering Efficiency activities.
• Plan, organise and approve Inspecting and Test Plant, Inspection Qualification and Testing and Commissioning.
• To take role as Work Package Owner (WPO) responsible for packages progress to completion with help of supervisor and final handover documents.
• Promote safe work practises.
• Promote commercial awareness.
• Participation in providing inputs to Knowledge centre and utilization of temp plates, materials.
• BIM Modelling internal reviews with BIM/CAD Team , CSA & MEP counter parts and review with client for LOD 400, 450 and 500
• Ad-hoc duties as determined by Management.

Job Qualifications:

• Bachelor’s Degree in Chemical or Environmental Engineering
• Diploma holders with additional 2 - 3 years’ experience unless equated with professional certifications.
• With 6 - 8 years of relevant experience
• Experience in design and/or construction in either Deionised/Ultrapure Water or Wastewater or Chemical or Gas Systems
• Experience in leading team in throughout project cycle start from concept design, detail design, construction, testing and commissioning, handing over.
• Understanding of Codes and Engineering Standards of International Clients.
• Conversant in the use of design software.

Job Description:

• Responsible in preparing documentation including daily report, monthly progress report, method of statement and work procedure to project manager.
• Responsible in overseeing drawing management and make sure the updated drawings to the clients and subcontractor are issued.
• Assist the project manager or senior project engineer in coordinate with related consultant and quantity surveyor on the change order issued
• Coordinate and work closely with safety personnel to ensure all government and safety regulation are complied.
• Conduct weekly or monthly meeting with sub-contractors to update the progress of work.

Job Requirements:

• Good interpersonal and communication skill
• Good organization skill
• Able to multitask
• Able to work under fast paced environment

• Overseeing the construction activities and progress, planning, implementation and monitoring work schedules in accordance to the master and detailed work programs.
• Liaise with Consultants on technical issues and coordinate the site activities with subcontractors.
• Maintain quality standards and carry out site inspections.
• Ensure compliance with EHS requirements, regulations, and best practices throughout the project lifecycle.
• To supervise and ensure works are in accordance to the contract drawings and specifications.
• Ensure site safety and proper execution of site work procedure on site
• Plan the sequences of the construction operations following the Project Quality Plan.

Requirements

• Minimum 5 years Local Experience in Construction Industry;
• Degree in Civil Engineering or Construction related field;
• Able to work independently, a strong team player and to handle fast paced projects.
• Good interpersonal, written and verbal communication skills for collaboration with stakeholders across all levels.
• Independent, diligent and highly motivated with excellent team spirit

Project Engineer

Job Detail:

• Basic salary $3,500 - $4,500 (Subject to the experiences)
• VB
• 5.5 days, Mon - Fri 8am - 6pm; Sat 8am - 12nn
• Full 6 days week for the first 6 months of employment
• Aljunied

Job Scope:

• Manage the transmission of documents and drawings to the client and subcontractor to ensure the updated drawings are issued
• Prepare method statements and work procedures
• Conduct weekly or monthly meetings with subcontractors to update the progress of work
• Ensure the quality of work is achieved and all government and safety regulations are complied with
• Oversee drawing management and control of technical documentation
• Manage the procurement of resources, monitor and control material usage on site to avoid unnecessary wastage or wrongful usage
• Assist the Project Manager or Senior Project Engineer in coordination with consultants on change orders issued & liaise closely with the Quantity Surveyor by providing necessary supporting documents on the change order
• Organize labor, equipment, and material for day-to-day site activities
• Carry out material receiving inspections and maintain material records
• All delivery orders are to be returned to the office for record
• Prepare daily and monthly progress reports, perform, and maintain inspection records
• Any other duties assigned

Job Requirements:

• Degree in Civil Engineering ONLY (Recognized Degree by BCA/PEB)
• Minimum 1-2 years of local experience with main-con

How to apply:

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret only shortlisted candidates will be notified.

Kok Jean Ray
Registration Number: R22110935
EA Licence No: 16C8004 (Elitez Pte Ltd)

M&E Engineer

Job Detail:

• Basic salary $3,500 - $4,500 (Subject to the experiences)
• VB
• 5.5 days, Mon - Fri 8am - 6pm; Sat 8am - 12nn
• Full 6 days week for the first 6 months of employment
• Aljunied

Job Scope:

• Assist M&E Manager in coordinating M&E specific works on site
• Control site progress & installation quality as per approved Shop Drawings, Technical Submissions and Equipment/Material Procurement/Fabrication/Delivery Schedule for on-time completion
• Responsible for M&E drawing coordination and production of CSD and individual service drawings quality
• Responsible for conducting QA/QC inspection, managing RE, RTO and responsible for clearing QA/QC inspections to meet with construction schedule
• ⁠Responsible for variation order cost collection, cost verification of the VO works and make necessary recommendation of VO prices
• ⁠To check, evaluate and confirm work done and material supply quantity status for the purpose of M&E sub-contractor/NSC vendors progress payments incl. instruction of progress substantiation document preparation by sub-contractors and vendors
• ⁠⁠Responsible for site implementation of safety standards to comply with IMS safe work methods
• Responsible for attendance to daily site co-ordination meeting and provide detail co- ordination with sub-contractors

Job Requirements:

• Degree in M&E Engineering ONLY (Recognized Degree by BCA/PEB)
• Minimum 2-3years in construction related experiences
• Possess Electrical Trade experiences will be added advantage

How to apply:

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret only shortlisted candidates will be notified.

Kok Jean Ray
Registration Number: R22110935
EA Licence No: 16C8004 (Elitez Pte Ltd)

Join Our Dynamic Team as a Senior Project Engineer!

Are you an experienced engineer with a passion for innovation and a track record of excellence? Do you thrive in dynamic environments where your expertise can drive impactful change? If so, we invite you to take your career to the next level with us!

We are seeking a highly skilled Senior Project Engineer to join our team and lead our mission of innovation and excellence. As a Senior Project Engineer, you will play a pivotal role in managing and executing a variety of projects across different facilities. You will collaborate with a team of dedicated professionals, leveraging the latest technologies and your extensive experience to deliver outstanding results.

Key Responsibilities:

• Work closely with Project Managers to plan and manage projects effectively, ensuring seamless execution and alignment with technical and engineering requirements.
• Collaborate with main contractors and consultants to diligently track work progress and adherence to the project schedule, ensuring engineering specifications and standards are met.
• Facilitate communication with subcontractors and suppliers, meticulously prepare all project costs, process claims, and monitor budgets to ensure financial efficiency and compliance with engineering requirements.
• Attend site meetings and perform detailed site inspections to ensure project milestones are met and technical standards are upheld.
• Oversee the daily activities of subcontractors, ensuring strict adherence to job site safety policies and procedures, with a focus on engineering safety standards.
• Monitor and inspect work progress, maintaining rigorous quality control and assurance standards, and promptly address any engineering issues that arise.
• Work closely with the team to meet all requirements and expectations during testing and commissioning with consultants, ensuring successful project outcomes that meet engineering criteria.
• Prepare and review technical documentation, reports, and specifications to ensure clarity and accuracy throughout the project lifecycle.
• Identify potential risks and develop mitigation strategies to ensure project objectives are achieved without compromising safety or quality.
• Aid the Project Manager and team in the efficient closure of projects, including the handover process, OMM, and as-built documentation submission, ensuring all engineering documentation is accurate and complete.
• Ensure the proper upkeep of documents and efficiently upload them to the server for organized record-keeping, maintaining the integrity of all engineering records.
• Participate in post-project reviews to identify lessons learned and recommend improvements for future projects.

Qualifications:

• Diploma / Bachelor's degree in Engineering or related field
• Excellent problem-solving skills and analytical thinking
• Effective communication skills with the ability to collaborate in a team environment
• Commitment to maintaining high standards of safety and quality.
• High adaptability
• Minimum of 3 years of experience in a related field.
• Proven experience in project management and execution.

Why Join Us:

• Opportunity to work on innovative projects that make a real impact
• Collaborative and supportive team environment with mentorship opportunities
• Continuous learning and professional development opportunities
• Competitive compensation and benefits package
• Exciting company culture with team outings, events, and more

Helpdesk or (Outsourced) – End-User Support

Working hours: Monday to Friday, 9:00 AM - 6:30 PM.

Responsibilities:

• Oversee maintenance, set-up, installation/re-installation, relocation and migration of IT peripherals.
• Provide support for hardware, software, and peripheral devices, including upgrades and patches.
• Onsite & remote support for clients/end-users on IT-related requests
• Diagnose and able to resolve technical issues related to desktops, laptops, and printers.
• Ensure issues are addressed and resolved in a timely manner.
• Assist in configuring and setting up new employee workstations
• Manage software administration (e.g. Microsoft 365), including password resets and account management.

Requirements:

• Minimum ITE / Diploma in IT or equivalent.
• Fresh graduate are welcomed to apply.
• Able to deliver IT support to in a end-user environment.
• Excellent verbal and written communication skills, with a strong focus on customer service.
• Take initiative and able to work in a fast-paced environment, independently and also as part of a team.
• Open to help out after office hours (OT) depending on projects

What you will do:

As Senior Sales Engineer HVAC, you will be responsible for small accounts offering less technically complex solutions. Builds relationship with customers, which may be end users, to understand needs and offers solution within a standard framework or range on pricing and margin.

How you will do it:

• Study product knowledge and company working procedure, continuous to improve domain knowledge of product, company and industry.
• Plan annual secured order strategy aligned with Department goal. Achieve business sales target with YOY growth expectation in the region.
• Prepare and issue tenders and proposals to customers. Lead negotiation and/or bidding activity at optimum profit levels to the company. Close orders to achieve the goals and targets assigned. Responsible for payment collection.
• Provide monthly reporting on assigned vertical secured and revenue attainment as well as non-financial reporting to management team.
• Be proactive to liaise, develop relationship and influence customer(s) to maintain a long-term service relationship, ensure customer satisfaction at high level.
• Develop sales leads and identify customer requirements.
• Monitor and collect competitors’ activities in market and report periodically directed by company.
• Independently develop and follow up HVAC projects to provide solutions for customers.
• Responsible for the promotion of HVAC products and systems in design institutes, industry associations and integrators in the industry in the region.
• Conduct cold calls and new business development.
• Explore and execute end to end HVAC project, and provide product/industry solution to customer.

What we look for:

• Bachelor Degree or above, preferably in Mechanical engineering and HVAC engineering or Electrical / Electronic engineering
• Minimum 1-3 years working experience as sales/marketing position in direct selling industrial machineries
• Self-motivated, hardworking and positive, hunter personality
• Strong interpersonal, presentation and selling skills
• Good spoken and written in English

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Job Summary: The ideal candidate will have a strong background in GenAI development, with a focus on Azure and OpenAI integration. Experience with AWS and Google GenAI services is preferred. Candidate will play a key role in designing, developing, and implementing cutting-edge GenAI solutions that leverage the power of Azure and OpenAI technologies.

Responsibilities:

· Design, develop, and implement GenAI solutions that integrate with Azure and OpenAI platforms.

· Collaborate with cross-functional teams to gather requirements and define project objectives.

· Conduct research and stay up-to-date with the latest advancements in GenAI, Azure, OpenAI, AWS, and Google GenAI technologies.

· Develop and maintain scalable and efficient codebase for GenAI applications.

· Optimize GenAI models and algorithms for performance and accuracy.

· Troubleshoot and debug GenAI applications, ensuring smooth operation and minimal downtime.

· Collaborate with data scientists and machine learning engineers to enhance GenAI capabilities.

· Provide technical guidance and mentorship to junior team members.

· Stay informed about industry trends and best practices in GenAI engineering and cloud service integration.

Requirements:

· Bachelor’s or master’s degree in computer science, Engineering, or a related field.

· Proven experience as a GenAI Engineer, with a focus on Azure and OpenAI integration. Experience with AWS and Google GenAI services is preferred.

· Strong programming skills in languages such as Python and/or Java.

· Experience with Azure services, including Azure Machine Learning, Azure Cognitive Services, and Azure Functions.

· Familiarity with OpenAI technologies, such as GPT-3/4 and reinforcement learning frameworks.

· Solid understanding of machine learning algorithms and deep learning frameworks.

· Proficiency in data preprocessing, feature engineering, and model evaluation techniques.

· Strong problem-solving and analytical skills.

· Excellent communication and collaboration abilities.

· Ability to work independently and as part of a team in a fast-paced environment.

Preferred Qualifications:

· Experience with AWS services, such as Amazon SageMaker, AWS Lambda, and AWS AI/ML services.

· Knowledge of Google Cloud services, including Google Cloud AI Platform, Google Cloud Functions, and Google Cloud AutoML.

· Experience with cloud-based deployment and scaling of GenAI applications on Azure, AWS, and Google Cloud.

· Knowledge of containerization technologies such as Docker and Kubernetes.

· Familiarity with DevOps practices and tools for CI/CD pipelines.

· Contributions to open-source GenAI or cloud service integration projects.

Field of Study ; Civil Engineering

Roles & Responsibilities

· The Project Engineer is reporting to the Director / Project Manager / Supervisor.
· Site & office project management and daily operations including inspections, handover, site measurements, project management.
· Handling technical and engineering issues.

· Report and prepare with given report template for the inspection outcome.
· Attend Site / Design meeting / Site Inspection when required.
· Site co-ordination, monitoring and report work progress.
· Ensure safe work procedures are implemented at site.
· Ensure projects meet authority standards.
· Manage projects to meet the time, cost and quality objectives
· Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of projects
· To carry out inspections independently to all kind of civil & structures related matters such as infrastructures, roads & related facilities and/or existing building structures and to identify any defects and the scope of suitable repairs.

· Supervise on the repair works conducted by the contractors and ground agencies; and keep proper records accordingly.

· Responsible for timely submission of reports and completion of projects including tender/submission with target dates

· Proficient in Microsoft Office

· Degree Civil & Structures Engineering discipline recognized by PEB
· At least 1 years of related work
· Possess good leadership, planning and decision-making skills
· Possess good communication and interpersonal skills
· Possess positive, responsible and self-motivated attitude
· Able to work in a team

· Other Ad-hoc related duties assigned by the company.

JOB DESCRIPTION

You will be part of the Managed Services team. Your responsibilities include technical administration, maintenance and troubleshooting. You are expected to work with our client to ensure IT Support Services are delivered based on agreed service level definition, much to the satisfaction of both customers & company. Managing customer’s expectation is part of your job scope, which required of you to work closely with external & internal project team members. You are expected to be a fast learner, to acquire technical implementation skill as and when needed due to business requirements. You need to have a strong analytical and problem-solving skill, so as to excel in supporting our customers.

KEY RESPONSIBILITIES

• Monitor condition of server, apps and security measures

• Identify, log and resolve technical problems of the scope (Incident Management)

• Ensure that work is carried out within agreed service levels (Service Request / Incident / Change / Patch Management)

• Respond to site to troubleshoot, diagnose and rectify faults

• Liaise and coordinate the recovery of systems

• Identify potential changes and system improvements for consideration and implementation (continuous improvements)

• Create, maintain and distribute reports of progress to service delivery manager.

• Any other ad-hoc tasks assigned

JOB REQUIREMENTS

• Good knowledge of windows operating systems, Clusters, NLB, or Unix

• Good knowledge of OS Provision, hardening and patching.

• Good knowledge of Solarwinds, Manage Engine.

• Good knowledge of AV solution such as Symantec.

• BMC Control-M

• Good server experiences like AD administration & basic networking experiences

• At least 3 years of relevant working experience in infrastructure support is required for this position.

Soft Skills:

- Self-driven and must be effective in working both independently and in a team setting, with minimum supervision.

- Good problem solving and logic skills

- Good communication skills (verbal and written) in English

- Excellent customer management skills

Qualifications:

- Diploma or Bachelor degree in Computer Science, Engineering, Information Technology or related discipline from a recognized institution.

- Information Technology Infrastructure Library (ITIL) foundation certification

WORKING HOURS

Mon - Fri 8.30am - 6pm

will be stationed at either RWS Sentosa or Genting Centre

NO VB & AWS

**We regret that only shortlisted candidates will be notified. Personal data collected will be used for recruitment purposes**

JOB DESCRIPTION

IT Infrastructure Engineer You will be part of the Managed Services team. Your responsibilities include technical administration, maintenance and troubleshooting. You are expected to work with our client to ensure IT Support Services are delivered based on agreed service level definition, much to the satisfaction of both customers & company. Managing customer’s expectation is part of your job scope, which required of you to work closely with external & internal project team members. You are expected to be a fast learner, to acquire technical implementation skill as and when needed due to business requirements. You need to have a strong analytical and problem-solving skill, so as to excel in supporting our customers.

KEY RESPONSIBILITIES

• Monitor condition of server, apps and security measures

• Identify, log and resolve technical problems of the scope (Incident Management)

• Ensure that work is carried out within agreed service levels (Service Request / Incident / Change / Patch Management)

• Respond to site to troubleshoot, diagnose and rectify faults

• Liaise and coordinate the recovery of systems

• Identify potential changes and system improvements for consideration and implementation (continuous improvements)

• Create, maintain and distribute reports of progress to service delivery manager.

• Any other ad-hoc tasks assigned

JOB REQUIREMENTS

• Good knowledge of Vmware and Nutanix

• Good knowledge of EMC and Huawei storage systems

• Good knowledge of windows operating systems, Clusters, NLB, or Unix

• Good knowledge of Solarwinds, Qradar

• At least 5 years of relevant working experience in infrastructure support is required for this position.

Soft Skills:

- Self-driven and must be effective in working both independently and in a team setting, with minimum supervision.

- Good problem solving and logic skills

- Good communication skills (verbal and written) in English

- Excellent customer management skills

Qualifications:

- Diploma or Bachelor degree in Computer Science, Engineering, Information Technology or related discipline from a recognized institution.

- Information Technology Infrastructure Library (ITIL) foundation certification

WORKING HOURS

Mon - Fri 8.30am - 6pm

Will be stationed at either RWS Sentosa or Genting Centre

NO VB & AWS

**We regret that only shortlisted candidates will be notified. Personal data collected will be used for recruitment purposes**

Main contractor for LTA project seeking for the above position:-

Alternate Saturday

Roles & Responsibilities:-

· Act as the main technical adviser on a construction site for subcontractors, craftspeople, and operatives & junior Engineers.

· Responsible for checking/advise of plans, drawings, and quantities for accuracy of calculations of area are followed correctly.

· Responsible to ensure that all materials used, and work performed are in accordance with the specifications & budget.

· Responsible for work progress timescales. (In charge area)

· Supervising of project crews.

· Coordination with consultant traffic team for timely submission and obtaining approval of temporary and permanent traffic diversion plan.

· Coordination work with authorities, clients and QP.

· Coordination with LTA term contractors (traffic light and street lighting).

· Ensure safety, health & security of the in-charge area.

· Assist in preparation of Approve-In-Principle (AIP), Preliminary, pre-final and final submission drawings with consultant for LTA, NPARKS, PUB and BCA submissions.

· Attending and preparing minutes for meeting with clients, consultant and technical agencies such as NPARKS, PUB, HDB, URA and etc

· Liaise and coordinate with interfacing contractors on traffic diversion matters.

· Assist in planning and execution of works

· Review method statement for various construction works and traffic diversion and traffic control plan for submission to LTA.

· Take part in briefing with sub-contractors on the technical

· Deal with arborist on site works to meet NPARKS requirement

Qualifications and Education Requirements

· Minimum 10 years of working experience in road alignment design and traffic engineering after tertiary education. Shall be well versed and have experience in LTA’s design standards.

Job Description

• Industry/ Organization Type: Manufacturing/ Production (Precision Engineering)
• Position Title: Procurement Engineer
• Working Location: Kaki Bukit
• Working Hours: 5 days (Mon – Fri, 8am – 5.30pm)
• Salary Package: Up to $4,500 + AWS
• Duration: Permanent

Key Responsibilities

• Report to Operations Manager.
• Obtain quotations and purchase raw materials, components, and assign secondary processes to subcontractors.
• Update approved machining subcontractor quotations in the system.
• Issue and manage Work Orders and Purchase Orders.
• Source materials, components, and plating for cost reduction.
• Perform evaluations for company purchases and assist with assigned duties.
• Collaborate with the group sourcing team on procurement evaluations.
• Develop and manage the Supply Chain Management plan.

APPLY NOW!!!

• At least Diploma in Mechanical Engineering with 1 year of related working experience. Preferably from the Manufacturing industry.
• Proficient in Microsoft Office is a must.
• Experience with CRM tools (such as Salesforce) would be beneficial.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71172 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

If you are a Sales professional looking to grow your technical sales know-how, then Emerson has a great opportunity for you! Based in Singapore, the Senior / Sales Engineer will plan, and drive accounts assigned to grow the Valve business in Singapore.

In this Role, Your Responsibilities Will Be:

· Provide sales forecast and achieve/exceed bookings, sales, and profitability targets set for the Business Unit’s business in Singapore.

· Tap on prospects, analyze requirements to develop winning strategies, and negotiate to win the business profitably.

· Maintain excellent accounts and build strong relationships with external customers and the internal sales and service team.

· Collaborate with Inside Sales team for technical support, and generate winning proposals for order processing, project team, and documentation including post-sales service with the Service team and various departments within the organization.

· Proactively promote regulators and pressure safety relief valve products and service solutions by using marketing programs, maximizing field resources.

· Lead and build on internal sales team relationships and bring in Product Sales Specialists to assist in value proposition.

· Understand customer needs to uncover additional opportunities within accounts across all products and service solutions.

· Strong and keen sense of hunting and developing new opportunities/new customers.

Who You Are:

You effectively communicate in various settings: one-on-one, small and large groups, or among diverse styles and position levels. You build rapport in an open, friendly, and accepting way. You draw upon multiple relationships to exchange ideas, resources, and know-how. You understand that different situations call for different approaches. You position views and arguments appropriately to win support.

For This Role, You Will Need:

· Good communication/interpersonal skills and strong negotiation skills.

· Good in analytical, questioning and possess good critical thinking skills coupled with the ability to develop and implement strategies.

· Mature and independent while having strong team spirit with internal stakeholders.

Preferred Qualifications that Set You Apart:

· Degree/Diploma in Engineering (Mechanical, Chemical, Instrumentation, Automation) with 3-5 years of sales experience in marine, oil & gas, petrochemical & chemical industry.

· Proven experience in technical sales, preferably in the valves business would be an added advantage.

Please submit your application on or before 31 December 2024.

Our Offer To You:

By joining Emerson, you will be given the opportunity to make a difference through the work you do.

Emerson's compensation and benefits programs are designed to be competitive within the industry and local labor markets. We also offer a comprehensive medical and insurance coverage to meet the needs of our employees.

We are committed to creating a global workplace that supports diversity, equity and embraces inclusion.

We attract, develop, and retain exceptional people in an inclusive environment, where all employees can reach their greatest potential. We are dedicated to the ongoing development of our employees because we know that it is critical to our success as a global company.

We have established our Remote Work Policy for eligible roles to promote Work-Life Balance through a hybrid work set up where our team members can take advantage of working both from home and at the office.

Safety is paramount to us, and we are relentless in our pursuit to provide a Safe Working Environmentacross our global network and facilities.

Through our benefits, development opportunities, and an inclusive and safe work environment, we aim to create an organization our people are proud to represent.

Our Commitment to Diversity, Equity & Inclusion

At Emerson, we are committed to fostering a culture where every employee is valued and respected for their unique experiences and perspectives. We believe a diverse and inclusive work environment contributes to the rich exchange of ideas and diversity of thoughts, that inspires innovation and brings the best solutions to our customers.

This philosophy is fundamental to living our company’s values and our responsibility to leave the world in a better place. Learn more about our Culture & Values and about Diversity, Equity & Inclusion at Emerson.

If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: [email protected].

Main contractor for LTA project seeking for the above position:-

Alternate Saturday

Roles & Responsibilities:-

· Act as the main technical adviser on a construction site for subcontractors, craftspeople, and operatives & junior Engineers.

· Responsible for checking/advise of plans, drawings, and quantities for accuracy of calculations of area are followed correctly.

· Responsible to ensure that all materials used, and work performed are in accordance with the specifications & budget.

· Responsible for work progress timescales. (In charge area)

· Supervising of project crews.

· Coordination with consultant traffic team for timely submission and obtaining approval of temporary and permanent traffic diversion plan.

· Coordination work with authorities, clients and QP.

· Coordination with LTA term contractors (traffic light and street lighting).

· Ensure safety, health & security of the in-charge area.

· Assist in preparation of Approve-In-Principle (AIP), Preliminary, pre-final and final submission drawings with consultant for LTA, NPARKS, PUB and BCA submissions.

· Attending and preparing minutes for meeting with clients, consultant and technical agencies such as NPARKS, PUB, HDB, URA and etc

· Liaise and coordinate with interfacing contractors on traffic diversion matters.

· Assist in planning and execution of works

· Review method statement for various construction works and traffic diversion and traffic control plan for submission to LTA.

· Take part in briefing with sub-contractors on the technical

· Deal with arborist on site works to meet NPARKS requirement

Qualifications and Education Requirements

· Minimum 10 years of working experience in road alignment design and traffic engineering after tertiary education. Shall be well versed and have experience in LTA’s design standards.

Responsibilities:

· To prepare commercial and technical proposals for tenders / enquiries from local and overseas clients.

· Carry out municipal and industrial wastewater treatment process design and calculations, especially for biological treatment process.

· Able to generate P&ID and general arrangement layout drawings for proposed system.

· To specify process equipment/instrument/bulk materials for price sourcing from vendors.

· Able to work out complete detail costing for projects.

· To meet with customers on any technical clarifications or system presentation.

· Other ad hoc duties as assigned.

Qualifications and Education Requirements:

· At least 3 -5 Years of working experience in the water and wastewater field (with Design and Proposal role).

· Candidate must possess at least Bachelor’s Degree/ Post Graduate Diploma/ Professional Degree in Mechanical Engineering/ Environmental Engineering.

· Proficient in AutoCAD and Microsoft Office software.

· Fast learner and able to cope in a fast paced environment.

Please indicate your current and expected salary in your resume.

ALG is currently hiring Licensed Aircraft Engineers (B2) for our client based in Singapore. This role is an exciting long-term contract position with us.

Our client is renowned in the aviation industry for aerospace manufacturing, maintenance, repair, and overhaul of aircraft engines.

Job Responsibilities:

• Perform and certify aircraft maintenance tasks including inspection, repair, modification, and functional tests

Job Requirements:

• A CAAS license or an Aircraft Maintenance License, that is transferable to a Singaporean CAAS license; These include (but not limited to) – EASA, CASA, DCAM, etc.;
• Possess at least 2 type ratings, with a minimum of one of the following type ratings: A320, A350, A380, B747, B777, and/or B787
• At least five years of experience as an LAE; and
• Excellent interpersonal and communication skills (English proficiency in reading/writing)
• Good customer relationship skills

If you are interested in this role, please APPLY NOW! Please note that only shortlisted candidates will be notified.

EA License Number: 11C4379 | Registration Number: R22105273

Responsibilities

• Assist, plan and execute Mechanical / Electrical / Fire / Plumbing & Sanitary (MEPL) project in compliance with safety, quality, and schedule
• Perform overall quality control of the work (budget, schedule, plans, team performance, supervision, and inspection)
• Manage project budget and expenses and provide regular project budget statement and progress update.
• Prepare, schedule, coordinate and monitor the assigned projects
• Monitor project compliance to applicable codes, practices, QA/QC policies, performance standard and specifications
• Assist to propose value engineering methods with the clients to interpret their requirements and represent them in the field
• Ensure site organization, workforce management and arrangement
• Provide technical submission of proposal / drawings / MOS / RA etc
• Attend site meetings and necessary site walk
• Cooperate and communicate effectively with internal and external stake holder.
• Review engineering deliverable and initiate appropriate corrective actions
• Any other duties as assigned and comply to ISO / OSHA standards

Requirements

• 1-3 Year(s) of working experience in managing Additional and Alteration services in Commercial / Industrial / Plants sectors for Mechanical, electrical, Plumbing and Sanitary system, Fire system (MEPL)
• Candidate must possess at least Bachelor's Degree/ Diploma in Engineering or equivalent.
• Proficient in MS Excels/words/PowerPoint/Project
• Preferred skill sets: good leadership skill, self-Driven, resourceful, problem-solving nature, strong business acumen, project management and good conversational/writing skills in English

Responsibilities

• Manage the project site by overseeing the day-to-day activities related to the construction of the project as designated by Project Manager
• Liaise with consultant for technical issues and coordinate the site activities with subcontractors
• Conduct inspection and checks on work performed by subcontractors
• Assist in the planning and sequencing of the construction operations
• Prepare project-related reports and method statement for submission

Requirements

• Degree in Civil Engineering recognized by PEB or qualification acceptable to the Commissioner of Building Control as eligible for application as a Resident Engineer, or recognised Degree in the relevant field subject to the acceptance of the Engineer, and at least 3 years of experience in the construction supervision for projects of similar scale and complexity.
• Minimum 5 years relevant experiences in Engineering and construction industry
• Experience with LTA Project is an advantage, working area nearby Boon Lay MRT.

Job Description

· Co-ordination and supervision of M&E works

· Liaise with M&E Consultants

· Ascertain and make provision for all M&E and building services in collaboration with the project staff

· Monitor progress, quality of workmanship and compliance with authority requirements.

· Highlight and advise the project staff on the interfacing of M&E services and the building works

· Coordination with multiple parties not limiting to design consultants / engineers, clients’ project representatives, statutory / authority agencies etc. for the establishment of the design deliverables requirements for submission

· Review design deliverables together with the design consultants / engineers and ensure that it is in order for submission

· Attend to technical clarifications as and when required to address technical issues and establish method statements

· Project Management and sites supervision works.

· Able to coordinate with contractors and consultants for engineering issues and drawing plans.

· Perform all duties in accordance with company policies, processes, systems and procedures.

. Working location nearby Boon Lay MRT.

Job Requirements:

Minimum five years of engineering experience with Degree in Civil Engineering recognised by the PE Board or qualification acceptable to the Commissioner of Building Control and eligible for application as a Resident Engineer or Recognised Degree in the relevant field subject to the acceptance of the Engineer, and at least three years of experience in the construction supervision for building projects with basement structures.

• Possess a deep understanding of network protocols, risk management, security standards, and regulatory compliance.
• Analyze network traffic patterns, identify bottlenecks, and track performance to proactively address issues and optimize network efficiency.
• Actively participate in network audits and collaborate with stakeholders to ensure the Bank's APAC network adheres to bank rules and regulatory guidelines.
• Establish and enforce network operational procedures, supervise the Network Operations team, review KPIs, and ensure SLAs are met.
• Manage vendors and service providers, including MSAs and SAs, to optimize service reliability and cost-efficiency.
• Coordinate with cross-functional teams on network planning and service-related matters, such as DR drills, third-party risk management, asset management, lifecycle management, privilege access management, and patch management.
• Oversee the design and architecture of the network to ensure scalability, reliability, and security.
• Possess a strong understanding of network budget planning, including Capex and Opex.
• Develop and maintain network performance reports for management review.

Qualifications:

• Bachelor's degree in Computer Science, Information Technology, or a related field with at least 5 years of experience as a Network Operations Lead or Senior Network Engineer.
• Minimum of 8-10 years of experience in network planning, design, and implementation.
• CCNP/CCDP, ITIL, or equivalent certifications. CCIE certification is preferred.
• In-depth knowledge of network protocols, risk management, security standards, and regulatory compliance.
• Proven hands-on experience in network deployment for large enterprises and data centers.
• In-depth knowledge of IP routing, switching, BGP, OSPF, SD-WAN, QoS, and VPC.
• Proficient with Cisco, Fortinet, Checkpoint, F5, or equivalent network devices.
• Proven ability to work effectively with cross-functional teams.
• Prior experience in the banking or financial industry is advantageous.
• In-depth knowledge of IP routing, switching, BGP, OSPF, SD-WAN, QoS, and VPC.
• Strong technical writing and documentation skills.
• Excellent written and verbal communication skills, capable of presenting to both technical and non-technical audiences.

To apply, please visit www.gmprecruit.com and search for Job Reference: 24981

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

Company Overview

Quanta Integration and Solution Pte Ltd is a leading vehicle safety solution and telematics company that specializes in providing cutting-edge technologies to enhance vehicle safety, efficiency, and connectivity. With a focus on innovation and customer satisfaction, Quanta Integration and Solutions is committed to delivering top-notch solutions to its clients working closely with its technology partners

Position Overview

As an Assistant Ops Engineer at Quanta Integration and Solutions, you will play a crucial role in supporting the operations team in various technical and administrative tasks. You will work closely with the operations team to ensure smooth project execution and efficient delivery of services to our clients.

Responsibilities

• Assist in Operations and Management: Collaborate with the Operations Manager to oversee and manage all aspects of daily operations, including fleet safety, telematics services, and customer support.
• Coordinate with different departments- During operations and projects need to coordinate with the internal departments to ensure the Technology requirement is addressed according to the customer's need and coordinate with the internal department to order the stock and follow up closely for the delivery to the customer.
• Team Leadership: Provide guidance and support to operational teams to ensure they meet performance and safety standards. Assist in staff development and training.
• Process Improvement: Continuously assess and enhance operational processes, seeking ways to improve efficiency, safety, and customer satisfaction.
• Data Analysis: Utilize telematics data and reporting tools to monitor and analyze vehicle and driver performance. Identify areas for improvement and implement solutions.
• Customer Support: Handle escalated customer inquiries or issues, ensuring swift resolution and excellent customer service.
• Resource Allocation: Assist in resource planning, scheduling, and deployment to ensure optimal utilization of personnel and equipment.
• Compliance and Safety: Ensure that all operations adhere to safety regulations, industry standards, and compliance requirements.
• Quality Control: Implement quality control measures to maintain service standards and client satisfaction.
• Reporting: Generate regular reports for senior management, summarizing key operational metrics, challenges, and improvements

Qualifications

• Degree/Diploma in Engineering Electronics/Electrical or a related field.
• Strong leadership skills with the ability to motivate and guide teams to achieve operational excellence.
• Strong technical knowledge in Electronics and an understanding of vehicle safety solutions and telematics systems is a plus.
• Experience with project management principles and practices.
• Proficient in using relevant software and tools for project documentation and analysis.
• Excellent problem-solving and analytical skills.
• Strong organizational and time management abilities.
• Effective communication and interpersonal skills.

Benefits

• Competitive salary and benefits package.
• Opportunities for professional growth and development.
• Collaborative and dynamic work environment.
• Chance to work with cutting-edge technologies in the automotive industry.

If you are a motivated individual with a passion for vehicle safety solutions and telematics and want to be part of a dynamic team at Quanta Integration and Solutions, we would love to hear from you. Apply now and join us in shaping the future of automotive technology!

Our client is one of the leading medical manufacturers. Due to business needs, they are now recruiting a Quality Assurance Engineer to be part of their QA Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of Quality Assurance Engineer:

• Maintain and update Quality Management System (QMS) procedures to ensure compliance.
• Verify process documentation, including work instructions, quality inspection plans, data sheets, and inspection reports.
• Lead and guide quality control inspectors to uphold compliance standards.
• Oversee in-process and final quality inspections, collaborating with internal teams to address manufacturing quality issues.
• Resolve process non-conformance issues promptly and effectively.
• Address customer complaints through containment actions, root cause analysis, and implementation of corrective and preventive measures.
• Manage documentation control systems and facilitate internal and external audits.
• Ensure timely completion of customer environmental surveys and related requests.
• Provide support for QA/QC activities, projects, and other ad hoc duties as needed.

Requirements:

• Min Diploma in related field
• At least 1 year of experience in Medical Manufacturing Industry, with exposure of ISO 13485 and ISO 90001

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Responsibilities:

• Attending site meetings with consultants.
• Study of Construction drawings details and coordinate with the consultants and sub-contractors to resolve any technical / site issues.
• Ensuring that works on site are carried out according to specifications / drawings.
• Inform Project Director or Project Manager on any technical / site problems arising.
• Supervising the progress of work on site.
• Reporting work progress to the necessary party.
• Ensure all fire protection systems and/or ACMV systems are in good conditions and ensure the systems are compliance with codes and standards.
• Oversee the installation, repair, and maintenance of fire protection systems.
• Coordination of sub-contractor’s work and ensuring that the work on site is on schedule.

Benefits:

• Performance bonus
• Company incentive trip
• Annual salary review

Requirements:

• Minimum Bachelor's Degree of Mechanical/Electrical/Mechatronics engineering or in related field.
• At least 3 years of working experience in building construction system for A&A works.
• Willing to travel islandwide.
• Offer subject to experience and qualification.