1) Cabin Technician

2) Aircraft & Component Technician

3) Sheetmetal Technician

4) Engine Technician

5) Ground Support Equipment Operator

CABIN AIRCRAFT TECHNICIAN

• To carry out inspection, repair, work on passenger and crew seats, galleys, toilets, aircraft cabin equipment and all fixtures & fittings items associated with the aircraft cabin interior in accordance with the approved company procedures and as per airworthiness and regulatory requirements.
• To remove and replace aircraft parts relating to the Aircraft Cabin to ensure high standards of maintenance of aircraft cabin and furnishings and to ensure the highest standards of passenger safety and comfort.
• Complete and maintain manuals and technical documents pertaining to the repair and maintenance work carried out on the cabin interior.
• Responsible for the cleanliness and tidiness of the working area.
• Monitor, maintain and control the movements of all spares and materials, to ensure their proper usage and deployment, including the returning to stores of all the un-used spares and materials at the end of each shift.
• To perform cabin configuration changes on fleet as per the operational requirements.
• To ensure cabin safety aspects are maintained during cabin maintenance and pay particular attention to Emergency equipment.
• To assist aircraft engineers & technician with regard to daily maintenance activities on the aircraft as assigned by Maintenance Supervisor.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionic Engineering/ Aeronautical Engineering.
• At least 2 years of Cabin Maintenance working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Able to commit rotating shifts, if applicable.

A&C AIRCRAFT TECHNICIAN

• Perform C and D aircraft heavy maintenance tasks as directed by a Certifying Licensed Engineer/Duty Supervisor.
• Perform other tasks that may reasonably be requested by the Licensed Aircraft Engineer/Duty Supervisor.
• To carry out routine aircraft servicing tasks as required in accordance with maintenance manual procedures, observing all safety procedures and manufacturers/company regulations. Depending on the discipline this may include conducting general visual inspections and fluid replenishment system servicing, refuelling etc.To effectively use any specialized tooling or test equipment that may be required as part of the checking, testing, replacement or servicing of a system or component.
• The ability to understand the need for such equipment’s as references in the aircraft manufacturer’s manuals is essential.
• The ability to communicate at various levels, and to coordinate with other areas over technical issues, to ensure that all relevant parties are aware of the aircraft’s serviceability status.
• To ensure the maintenance of tools and equipment in the relevant work place and conducting safe working practices at all times.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 2 years of A&C maintenance working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Able to commit rotating shifts, if applicable.

SHEETMETAL AIRCRAFT TECHNICIAN

• To perform Structural Repair as per OEM approved Structural Repair Manual and Repair Disposition.
• To assist Aircraft License Engineer and Supervisory Lead to perform damage/repair assessment.
• To perform part forming such as skin doubler, stiffener and bracket for structural repair proposes in-accordance to OEM approved manual or drawing.
• To perform basic airframe/cabin task as required to facilitate access removal for structural repair.
• Required excellent tool maintenance and housekeeping practices.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 5 years of Sheetmetal working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Familiar on basic structural repair tooling and practices.
• Must be able to work in confine space such as Fuel Tank if needed.
• Capable to interpret OEM Approved Engineering Drawing, Aircraft/Component Maintenance Manual and Structural Repair Manual.
• Able to commit rotating shifts, if applicable.

ENGINE OVERHAUL AIRCRAFT TECHNICIAN

• Perform disassembly/ assembly of engine/ module for repair and overhaul.
• Perform Boroscope inspection
• Install engine components onto the engine/ module.
• Perform troubleshooting, modification and maintenance works

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 2 years of Engine Overhaul working experience in Aviation industry, excluding OJT/Helper.
• Able to commit rotating shifts, if applicable.

GROUND SUPPORT EQUIPMENT OPERATOR

• To carry out preventive and corrective maintenance of the GSE
• To ensure equipment decals are visible. Replace if necessary
• Delivery of GSE to and from hangar
• Carry out inspection of GSE around airport bays
• Repositioning of maintenance steps from bays when required
• To ensure all metal structures of GSE are corrosion free by removal of corroded surface and using of corrosion protection agent
• To lubricate all movable joints

Requirements:

• NITEC in Mechanical / Electrical / Mechatronic engineering
• Class 3 or 4T preferred

• Well Established Company
• Basic $3000 - $4000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tuas (Transport Provided)
• Working day: Monday to Friday
• Working house: 8am to 5pm

Job Responsibilities:

• To ensure all the maintenance works carried out systematically, efficiently & safely
• By improving existing preventive maintenance system thus reduce maintenance cost and improve performance of equipment
• To be the initiator and coordinator of MOC for any addition, modification and replacement in the system
• To assist the Section Manager and Supervisor to co-ordinate and supervise the day-to-day activities
• To troubleshoot Mechanical Equipment / Systems’ problems when it runs abnormally malfunction
• To work closely with the operation team for daily, weekly and monthly maintenance programmed to maintain all equipment running efficiently, safely and smoothly
• To train all technician and staffs on equipment maintenance and monitor the 5S and TPM activities carried out in the section
• To assist the Section Manager to propose and implement action plans to rectify faults occurring in the system/processes
• To be involved in new project management time to time and be responsible for document preparation and other paper works, as well as co-ordination with contractors & Vendors
• To manage all Mechanical & electrical Instruments spare parts and tools

Requirements:

• Bachelor’s Degree in Mechanical Engineering
• Min 2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Senior Mechanical Manager

Working Hours: 5days (Mon-Fri), 8 am to 4.30 pm.

Work location: Jurong Island (Transport provided at Jurong East)

Salary: $8,000 to $9,500

Responsibilities：

• Management of annual/specific Project and Maintenance activities/budgets (both Mechanical and E&I) throughout fiscal year to achieve department goals.
• Ensuring that the relevant maintenance strategies as well as industry best practices are applied to the activities for maintenance and modifications in the plant to achieve reliability and availability of plant equipment of the highest level.
• Ensures all plant and equipment is maintained to the highest level of safety for work to avoid lost time accidents, with immediate response and thorough investigations and corrective actions for all hazardous occurrences and accidents.
• Ensure all Mechanical and E&I maintenance activities are carried out in accordance with the Company’s HSEQ Standards, statutory requirements, Company Maintenance & Management System, and best industry maintenance practices.
• Ensuring that there are adequate procedures and systems put in place for maintenance activities conducted within the process plant.
• Oversee all facilities planning and operations/functions including the maintenance, modification control of equipment, space allocation, move and construction.
• Works with counterparts in parent and subsidiary companies on technology transfers to raise maintenance performance standards.
• Line management responsibility for Maintenance team members.
• Approval of all work requests for equipment maintenance and modifications related to improvements and safety of process and plant.
• Approval of requisition for new equipment and maintenance spares.
• Approval of Contractors’ daily timesheets.
• Approval of the daily maintenance activities and modifications in the plant.
• Approval of grade change maintenance activities, in consultation with production department
• Planning and managing the shutdown maintenance.
• Provide training needs of Maintenance team members to ensure that they have the necessary skills and competencies to carry out their work in an efficient manner.
• Assessment and review of in-house contractors’ performance and the contract.
• Undertakes special assignments or projects as directed by the Manufacturing Director

Requirements:

• Degree in related discipline.
• Experiences in the chemical industry Singapore as Manager or Assistant manager.
• Experiences and knowledge about maintenance of mechanical rotating equipment and static facilities.
• Experiences as E&I Process/Maintenance Engineer at chemical plant or manufacturing facility.
• Knowledge about and to be familiar with high voltage power supply/MCC, control panel and/or DCS design and system to manage establishment will be an advantage.

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Job Description

• Industry/ Organization Type: Engineering
• Position Title: Mechanical Technician
• Working Location: Ang Mo Kio
• Working Hours: 5 Days/ 6 Days per week, 9am – 6pm
• Salary Package: Basic Salary + OT + AWS
• Duration: Permanent

Key Responsibilities

• Install, maintain and repair electrical machines.
• Identify and diagnose issues with machinery to perform timely repairs.
• Perform routine maintenance and inspections to ensure optimal performance.
• Assist with the development of existing or new machines.
• Helps in the sourcing of machine parts and liaise with vendors when required.
• Other ad hoc duties as assigned.

APPLY NOW!!!

• Proven experience in the electrical and machinery fields.
• With good understanding of electrical systems.
• Technical drawing knowledge is an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #68614 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Chemical Manufacturer
• Position Title: Maintenance Technician (Mechanical)
• Working Location: West (Nearest MRT: Tuas Crescent)
• Working Hours: 5 days (Monday-Friday: 8 am-5 pm)
• Salary Package: Up to SGD 5500 + Allowance SGD 220 + OT Pay + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintain, repair, and troubleshoot all plant equipment.
• Schedule and perform preventative maintenance.
• Participate in 5S and Total Productive Maintenance (TPM) teams.
• Assist in developing new equipment or plant expansion projects.
• Ensure contractor safety and oversee specific inspections or maintenance tasks.
• Maintain accurate maintenance records.
• Safely handle hazardous chemicals within the plant.
• Perform mechanical preventative and corrective maintenance on plant utilities, facilities, and manufacturing equipment.
• Operate and maintain systems such as steam boilers, water treatment, HVAC, air compressors, chemical and gas systems, and fire protection systems.
• Assist in spare part management.
• Maintain effective communication between shifts for smooth work transition.
• Process permits, conduct job safety analysis, and manage Lock-out, Tag-out (LOTO) procedures.
• Review and contribute to maintenance documentation such as Safe Work Procedures (SWP) and Job Safety Analysis (JSA).
• Report work progress to supervisors daily or as needed.
• Use a Computerized Maintenance Management System (CMMS) to manage work orders and checklists.
• Ensure contractors and third-party vendors execute maintenance tasks efficiently and adhere to safety regulations.
• Perform equipment or system testing, commissioning, and inspections to hand over to the operations team after maintenance or project completion.
• Participate in routine safety drills, troubleshooting, and failure analysis.
• Serve as an on-call technician for emergency maintenance after working hours.
• Suggest and implement ideas for continuous improvement in maintenance procedures to optimize costs, processes, and safety standards.
• Assist in maintaining spare parts inventory and ensure proper preservation in the store.

APPLY NOW!!!

• Min. ITE in Engineering.
• Min.3 years of maintenance experience in a related field, ideally within a chemical manufacturing environment.
• Proficient in the use of hand and power tools.
• Have basic knowledge of process control, refrigeration, boilers, steam systems, pumps, heat exchangers, Lockout/Tagout (LOTO) procedures, and industrial safety practices.
• Experience in electrical work or water treatment is an advantage.
• Willing to work OT on Sat.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68758 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

• Well Established Company
• Basic $4000 - $5500 + Allowance + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 5.30pm
• DCS | PLC | SCADA

Job Responsibilities:

• Understand / develop technical design specification / requirements and associated document relevant to project
• Develop system database, control logic and graphic according to project design
• Conduct Factory Acceptance Testing and System Commissioning on site
• Product test document and training material
• Conduct training to customer
• Provide technical support to sales and maintenance team
• Others ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent with 1-2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $4000 - $5500 + Allowance + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 5.30pm
• DCS | PLC | SCADA

Job Responsibilities:

• Understand / develop technical design specification / requirements and associated document relevant to project
• Develop system database, control logic and graphic according to project design
• Conduct Factory Acceptance Testing and System Commissioning on site
• Product test document and training material
• Conduct training to customer
• Provide technical support to sales and maintenance team
• Others ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent with 1-2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $ 4000 - $ 5000 + Transport Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location : Joo Koon
• Working hours : 8.30am – 5.30pm
• Working days : Monday to Friday

Job Responsibilities:

• Technical review on new project orders and order assignments to technical engineer & drafter team
• To manage and ensure timely submission of engineering documents i.e. Control Schematic Drawing, General Assembly Drawing, Wiring Diagram, Nameplate Drawing, Test Procedure, Data Sheet and etc
• To review all project engineering documents prepared by technical engineer & drafter team before submitting to client
• Manage engineering change function and ensure engineering documents are updated accordingly
• Provide advice and guidance to technical engineer & drafter team for any technical queries and To support other ops team on various aspects of technical/engineering matters
• To check and make recommendations based on common industrial engineering practice, where necessary
• To provide and implement cost effective and best engineering solutions for project in order to stay competitive
• To provide sound engineering practice and engineering calculation where applicable in a timely manner to meet project timeline
• To review international standards and/or project specifications for product compliance. i.e. ISO 12490 / API 6DX / IOGP S-707 / SHELL DEP standards or other industrial standards related to Valve Automation and/or instrumentation
• Providing field support for the customers to resolve after-sales technical issues or technical clarifications
• To attend internal/external kick off Meeting (KOM) when required
• Travel along with Technicians to installation base and sites if situation arise
• To assist manager to lead the department’s improvement programs and/or process efficiency initiatives
• To assist manager in maintaining and updating the department's Standard Operating Procedure
• To carry out Engineering Personnel annual Performance review to ensure competency and give counselling when required
• Support new employee orientation by providing brief Engineering department process flow training
• Support and Guide the Operation department in resolving aftermarket technical issues such as Product Design changes / Fault Finding / Supplier Discrepancies
• Performs additional related duties as requested or required

Requirements:

• Bachelor’s Degree / Diploma in Mechanical/Instrumentation or equivalent
• Minimum 6 to 8 years supervisory experience in Valve Automation and/or instrumentation background, preferably in the Valves & Actuators field for Oil & Gas Market
• Conversant with ISO 12490 / API 6DX / IOGP S-707 / SHELL DEP standards or other industrial standards related to Valve Automation and/or instrumentation
• Possess a strong knowledge in Pneumatic and Hydraulic circuits

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Responsibilities

• Research, network, cold call and client visit to identify and capitalize on new business opportunities.
• Build relationships with potential and existing clients to generate quality sales leads.
• Stay up-to-date on waste management industry trends, products, and services.
• Sales Forecasting and Reporting: Provide accurate and timely sales forecasts and reports.
• Attend trade shows, conferences, and industry events to network and generate leads.

Requirements

• Min Diploma in Mechanical/Electrical Engineering or it's equivalent
• At least 1 year related sales experience
• Good communication and intepersonal skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305
Reg. No.: R1874608

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Our client is from Oil and Gas industry. They are looking for a Lead / Principal Engineer (Mechanical) Oil & Gas for the next phase of their business. They are located in West.

Duties:

• Lead Mechanical and HVAC disciplines for CAPEX projects, overseeing FEED consultants, EPC contractors, and vendors.
• Develop and issue design bases, datasheets, project specifications, and scopes of work for feasibility studies, FEED, and EPC projects.
• Review and evaluate proposals from consultants, contractors, and vendors.
• Validate and approve Mechanical and HVAC deliverables in CAPEX projects.
• Support regulatory approval processes and coordinate with consultants and contractors.
• Collaborate with project management, engineering disciplines, and operations teams.
• Witness factory acceptance tests (FAT) and ensure accurate engineering databases.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 12 - 20 years’ experience in Oil & Gas industry, with exposure in LNG industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Scope:

• Provide technical support and troubleshooting for mechanical products
• Assist in product integration and customer site applications
• Collaborate with sales teams to deliver tailored solutionsX`
• Liaise with R&D to provide customer feedback and insights
• Prepare technical documentation and user training materials
• Conduct product demonstrations and training for clients
• Ensure optimal product performance and customer satisfaction
• Participate in product testing and validation
• Stay updated on industry trends and new technologies

Requirements:

• ITE or Diploma in Mechanical Engineering (or equivalent)
• Strong hands-on skills with small mechanical parts
• Proficiency in English and/or Chinese; Japanese is a plus
• Familiarity with AutoCAD 2000, R14, and SolidWorks is advantageous

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Our Client:

• Construction Industry [MNC]
• Havelock
• Mon – Fri, 8.30am – 5.15pm
• UP $3,500 Basic + VB + Mobile Allowance

Job Description:

• Assist the QS Manager in calculating quantities and costs for tender assignments, ensuring supplier proposals meet all requirements.
• Understand general contracts and various tender documents.
• Provide budget estimates as instructed.
• Liaise with suppliers for product and service presentations.
• Find solutions to technical issues during the tender process.
• Communicate with other departments regarding documents and issues.
• Coordinate with suppliers/contractors for follow-up on bills and quantities.
• Evaluate market rates for materials and labor monthly or quarterly.
• Hand over all tender documents and costing to the project team once awarded.
• Attend site visits for interested tenders.
• Respond to tender clarifications and prepare for interviews and presentations.

Requirements:

• Min. Diploma in Mechanical & Electrical Engineering or equivalent.
• Min. 1 year of mechanical engineering working experience as a Quantity Surveyor in Sub-Contractor environment.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Deidrie Chiam Rui-Xuan | EA Reg No: R23116361

RS Recruitment Agency LLP | EA Lic No: 17C8809

Employer Background:
The employer is a prominent player in the precision engineering sector, specializing in the manufacturing of high-quality metal components. They are known for their advanced engineering capabilities and commitment to delivering tailored solutions to meet customer needs.

Overview:
Join a dedicated team as a Design Engineer, where you will contribute to the design and development of precision engineering solutions, focusing on automation systems and custom fixtures.

• Position: Design Engineer
• Industry: Precision Engineering
• Department: Design and Engineering
• Employment Type: Full-Time
• Working Days & Hours: 5 Days, Monday to Friday, 9:00 AM to 6:10 PM
• Work Location: Within Central Location at Macpherson
• Salary Range: Up to $4,500 Monthly Basic (Based on Relevant Experience)

Job Responsibilities:

• Create schematic diagrams and manufacturing drawings for automation systems and jigs & fixtures, utilizing AutoCAD and/or SolidWorks.
• Collaborate closely with engineers and coordinate with customers to ensure that manufacturing drawings meet specifications and requirements.
• Assist in the design and engineering process to enhance manufacturing efficiency and product quality.

Requirements:

• Experience: Minimum 1 year of relevant working experience, preferably in the manufacturing automation or jig & fixture industry. Entry-level candidates are welcome to apply; training will be provided.
• Education: Minimum educational qualification: Nitec / Higher Nitec / Diploma / Degree in Engineering (Any Major).

Recruit Lync Pte Ltd | EA License Number: 22C1000
Poon Weng Teik (Wilson) | EA Personnel License: R1657737

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

• Mentorship, guidance, and training will 100% be provided
• Great for fresh grads who want to start out in the engineering field

• Responsibilities:
• Design, prepare shop drawing, methods statements, quality installation, inspection, testing and commissioning, documentation works for BMS system.
• Site coordination, project schedule planning, coordinate site works
• Design and deploy BMS controlling and building automation system.
• Project Management and attend project meeting.
• Provide training to customers.
• Provide testing and commissioning services

Requirements:

• Min Diploma / Degree in Engineering (Mechanical / Electrical Engineering / Construction / Building related)
• Able to define BMS project work scope, requirements and specifications, and identify, allocate resources for executing the project from start to completion.

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to Ashwin Vivek Vinod (EA Personnel Reg. No.: R22111690) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, Ashwin Vivek Vinod, at 6590 9957 or 9178 0355 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)