Senior Mechanical Engineer requirements:

- The project is a Power Plant at Jurong Island

- Familiar with Singapore's local technical standards, and acceptance process.

- Under the age of 35.

- Speak English

- Good health and strong safety awareness, good at communication

- Obey the Mechanical department management

- Have a qualified and valid skill certificate

- At least 5 years of mechanical work experience in Singapore, preferably as a mechanical engineer at the construction site of a Chinese company.

- Able to read Mechanical Installation drawings and guide site construction work drawings.

- Have a strong sense of responsibility, can take the initiative to work, reasonable planning, comprehensive consideration of work tasks

- Can communicate with owners, subcontractors, and other departments for permits and other works

- Able to start work on short notice will be an advantage

- Mechanical engineer with working experience in gas turbine power plant is preferred

- Adapt to our company's working hours

- Subcontractor management experience is preferred, have subcontractor management ideas

Responsibilities:

• Identifies, troubleshoot problems and performs root cause analysis study of equipment failures, recurring breakdown, and equipment defects in order to take effective corrective and preventive
• Liaises closely with Engineering on technical specifications required for machinery fitting, documenting the project requirements for the arrangement of machinery, equipment and system installation work
• Assists with the preparation of procedures, risk assessment, HSE work method statement and etc. under the supervision of senior team members and Project Manager to ensure all the requirements have been fulfilled
• Prepares job-list, work schedule and planning of manpower resources (i.e. yard and contractors) and facilities, working closely with the team members
• Participates in project meeting with Project team members and stakeholders to note on project specifications and report on the status of the work progress
• Liaises closely with HSE department and subcontractors for proper on-site coordination, working with QA/QC team members, owners, statutory and classification authorities on inspection arrangement and compliance review
• Maintains the equipment/ machineries at the workshop and on-board, ensuring the proper working condition, timely calibration, repair, or servicing as required
• Understands emerging engineering practices by participating in educational opportunities, professional organisations; reading professional publications and maintaining personal networks
• Recommends changes to work method/ process by reviewing the workflow and work process to implement changes for improvement and to achieve operational effectiveness and functionality

Requirements:

• Bachelor’s degree in Mechanical Engineering/ Marine Engineering or related engineering disciplines
• Entry Level candidates are welcome to apply (On Job Training will be provided)
• Excellent proficiency in English (written and spoken)
• Must be able to board ships, enter confined spaces with limited visibility and have the ability to climb up and down stairs and/or ladders of varying heights.
• Good in planning, organizing, and interpersonal skills and able to work independently

Working hours & locations:

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide Transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• Apply functional specifications and use engineering tools to design hardware for product changes and new development
• Assist in analysis, modification and design of products and services for assigned projects which requires basic knowledge of materials, components, and their applications
• Assist and participate in testing and test results analysis for assigned projects

Requirements:

• Degree in Mechanical Engineering or similar discipline
• Basic skillset should be to design various tools & equipment with latest industry/design codes and analysis
• Knowledge on CAD packages like SolidWorks are preferred

We are seeking talented R&D Engineer to assist with the design and customization of our new/existing Vertical milling machine portfolio. In this role, you will be working closely with the R&D team to create functional design concepts, validate designs, and follow through from design stage to production.

Responsibilities:

• Developing new products and introducing innovative designs for our existing product series.
• Crafting customized machines to meet the unique needs of our diverse customers.
• Nurturing collaboration across various company departments, including Sales, Marketing, Product Management, Production, Supply Chain, Customer Support, etc.
• Mastering the art of designing rigid, high-accuracy structural parts, as well as lightweight components for rapid, high-acceleration applications, working hand-in-hand with our Simulation and Test Engineers.
• Pioneering the development of mechatronic units, integrating Pneumatic, Hydraulic, Servo-electric, and Sensor components to create seamless machine systems.
• Engaging in Concept Design, Structural Simulation, Detailing, Prototyping, Testing, Production, Customer Support, and Monitoring machine performance at our clients' sites.
• Leveraging our dedicated R&D Lab for innovative prototyping.
• Enjoying mentorship from seasoned senior engineers, guiding you on your career path to success.
• Embracing a global perspective by collaborating with an extensive network of Makino R&Ds, Sales Regions, and Key Suppliers.

Requirements:

• Bachelor's Degree in Mechanical Engineering from a reputable university.
• Passion for Product design.
• Excellent Problem-solving skills and able to work hands-on.
• Effective team player who is creative, meticulous, independent and responsible.
• Familiar in 3D modelling software such as SolidWorks and Simulation tools will be an advantage.

We are seeking a highly skilled and innovative Executive Engineer, Mechanical to join our dynamic team in Singapore, Singapore. In this role, you will be responsible for designing and implementing cutting-edge mechanical engineering solutions for various building and infrastructure projects.

• Design and perform calculations for mechanical engineering works, including ACMV, fire protection systems, plumbing, and sanitary systems
• Conduct technical feasibility studies, life cycle analyses, and planning for building engineering projects
• Develop comprehensive study reports, design reports, and technical specifications for mechanical engineering projects
• Prepare detailed tender documents and evaluate proposals, providing thorough assessment reports
• Collaborate with cross-functional teams to ensure project goals are met efficiently and effectively
• Provide support in project management and contract administration for building engineering contracts
• Implement innovative mechanical engineering solutions while staying up-to-date with industry trends
• Troubleshoot and resolve complex mechanical engineering issues as they arise
• Mentor junior engineers and contribute to the overall growth of the engineering team
• Ensure compliance with industry standards and regulations in all project phases

Job Description

• Ensure and maintain in site co-ordination of housekeeping and safety activities for the concerned modules with various disciplines
• Liaise with Project Lead / Superintendent to understand and follow up of the project schedules. Expedite the equipment installation works to achieving targeted progress
• Updating and reporting project progress reports and plan for one week look ahead of activities to be completed
• Assist in manpower and resource scheduling and deployment, daily manpower deployment and allocation
• Attend daily VSCC meeting
• Obtain hot work permit and entry into confined space permits or any other work permit system
• Monitor job progress and ensure quality work at targeted schedule
• Prepare reports on job status, work completion and report to the Project Engineer
• Lead all inspections and ensure proper handling over to clients
• Liaise and coordinate with other departments on project issues
• Able to provide guidance and training to subordinates in the course of work
• Ensure that his workers are trained and instructed on the proper and safe working procedures
• Maintain safe and healthy working environment in workplace and to ensure correct safety practices are adopted by all men under his charge

Job Requirements

• Diploma/Degree in Mechanical Engineering
• Minimum 5 years of maintenance working experience in Marine Shipyard
• Excellent written and good communicative skills, able to interact with people of all levels and teamwork
• Able to handle mechanical equipment installation on FPSO module, load test and preservation of valves, instruments and mechanical equipment
• Flange management on piping will be a plus point

1. JOB DESCRIPTION

Job Title

MECHANICAL DRAUGHTSMAN

Occupation

MECHANICAL DRAUGHTSMAN

Job Description & Requirements

Position Summary

Design and Develop Packaging Products by providing 2D Drawing for customers and operations.

Main Accountabilities

The person is in-charge of

· Designing of products as required by the customers through the informations from the Sales Team.

· Preparation of Drawings and Bill of Materials for the products (Foam, Cartons, XPallet).

· Suggests improvements or modifications to current products for customers’ approval.

· Provides support to Production to ensure a more cost effective and more efficient way of producing the products.

· Integrates any requirements not stated by the customer but necessary for the intended use, where known

· Includes statutory or regulatory requirements to the designs, if applicable.

· Provides the specifications of the materials as specified in the Bill of Materials.

· Conduct Drop Tests and Vibration Tests

· Provides the specifications of the products.

· Work independently and can assist the Manager when the latter is not around.

· External discussions with customers together with Sales Team.

Internal & External Working Relationships

· External Customer

· External Vendors (ie Die Cut Mould Maker)

· Sales team

· Customer service

· Purchasing

· Operations (Production, Quality)

Job Requirements (Qualifications, Skills, Experience, Competencies)

· Engineering Background (preferably Mechanical, Industrial, Packaging or Design) or any related field.

· Experience in designing.

· Proficient in AutoCAD/ Solidwork or other CAD softwares.

· Knowledgeable in doing 3D Drawings.

· Preferably has a background in designing packaging materials.

· Has good Organizational and Planning Skills

· Knowledgeable of the concept of Engineering Statics and Dynamics.

· Knowledgeable on Microsoft Office (Word, Office, Powerpoint) or similar softwares.

· Proficient in doing reports (verbal and written)

· Has interest in personal development through new technologies and innovations.

· Good problem-solving skills

· Positive and Motivated

Key Responsibilities

• · *Maintenance and Repair*: Perform routine maintenance, repairs, and troubleshooting on oil and gas equipment (Exchanger, Pump, Vessel, etc…)
• · *Technical Support*: Provide technical assistance and guidance to operations personnel, contractors, and other stakeholders.
• · *Inspections and Testing*: Conduct regular inspections and testing to ensure equipment is functioning correctly and safely.
• · *Documentation and Reporting*: Maintain accurate records of maintenance activities, inspections, and repairs, and provide detailed reports to management.
• · *Safety and Compliance*: Ensure all work is performed in accordance with industry regulations, company policies, and safety procedures.
• · *Troubleshooting and Problem-Solving*: Identify and resolve equipment issues, using analytical and problem-solving skills.
• · *Collaboration and Communication*: Work closely with operations, maintenance, and other teams to ensure effective communication and coordination.
• · *Continuous Improvement*: Identify opportunities for improvement and implement changes to optimize maintenance processes and equipment performance.

• ITE in Mechanical Engineering or equivalent
• Good technical Knowledge on Mechanical or Electrical and Instrumentation
• Hands-On experience on Pumps (Centrifugal, gear pumps, etc.) and Motors
• Customer service oriented
• Independent and proficient in basic writing skills
• Class 3 driving license is a plus
• Relevant working experience in pumps servicing/repair

About Beca

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are currently recruiting for experienced Senior Engineer – Mechanical (Building Services) to join our Building Services team in Singapore.

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

• Leading mechanical services (HVAC) design for building projects
• Assume responsibility and undertake engineering tasks of increasing scope and complexity
• Responsible for analysis of information, production of design, tenders, proposals and technical report writing
• Assist in coordination of quality assurance and commissioning of designs with other disciplines and other design consultants
• In charge of jobs control, planning, monitoring, progress and job cost reporting
• Communicate effectively with the client, sub-consultants, contractors, and other parties relevant to the job
• Assist in assessment and review of designs prepared by others on behalf of the clients
• Liaise with authorities on plans submission and compliance

Pre-Requisites

• Degree in Mechanical Engineering
• At least 5 years experiences in consulting firm
• Leading roles experience in ventilation & air-conditioning (HVAC, Plumbing & Drainage) design & design management of commercial, healthcare or school projects will be an advantage
• Competent user of relevant engineering software, Building Information Modelling and Navisworks
• Excellent written & spoken communication skills in English
• Able to work independently & exercise initiative
• Excellent delegation and communication skills, which see you enlist the help of others to meet objectives
• A team, client and delivery focused working style

Job Highlights

• Career Advancement
• Medical & Telecommunication Allowance
• AWS, Variable Bonus

Ready to make a move?

We offer a comprehensive career growth and professional development opportunities along with a supportive and caring work environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply online now with your CV.

Please include the following information in your resume:

• Education background
• Work experiences
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

Tasks and Responsibilities

• Assist Section Project Lead in day to day operations.
• Perform the assigned mechanical task under quality and schedule.
• Advise the project’s design mode & standard
• Familiar with Class regulation/rules, product, standard
• Report the project daily discipline (Man-hour/Schedule etc.)
• Able to work with other team members for the overall progress of the project
• Feedback for profession’s design mode & standard
• Train & Guide the other project mechanical engineer (AE or draft man) to work together.
• Study & Solve the project issues under mechanical responsibility
• Attend and report in project and section meeting
• Complete the assigned task for different project drawings or documents.
• Support Project Section Lead in Mechanical Technical issue.
• Coordinate with Shipyard /Consultant / Vendor
• Responsible to Mechanical Project Section Lead/ Mechanical Technical Lead
• Project Handling- New building project, Repair, Upgrading, Conversion project.

Job Requirements

• Minimum 5 years of relevant work experience in the marine/offshore industry Machinery/ Piping new-building engineering design.
• Familiar with Auto-CAD/ Microsoft Office/ AVEVA
• Familiar with Rules and Regulation from Classification Society and Authorities.
• Familiar with theory and calculation of marine/offshore Mechanical & Piping Design.

Key Responsibilities:

• Perform maintenance, repairs, and troubleshooting on a variety of vehicles.
• Conduct inspections and ensure vehicles meet safety and operational standards.
• Assist in diagnosing mechanical issues and recommend solutions.
• Collaborate with engineers to implement improvements in vehicle performance.
• Maintain detailed records of repairs and services performed.

Requirements:

• Diploma or certification in Mechanical Engineering or a related field.
• Proven experience in vehicle maintenance and repair.
• Strong understanding of mechanical systems and tools.
• Attention to detail and problem-solving skills.
• Ability to work both independently and as part of a team.

An Mechanical Engineering Technician is largely responsible for diagnosing and repairing vehicle engine systems.

. Repair brake and steering systems

. Diagnose and repair electrical and electronic systems

. Replace or repair transmissions and fuel components as needed

. Repair cooling components and systems including air conditioners and engine cooling system

. Perform emissions inspections, safety checks and similar state-regulated vehicle examinations

. Perform preventive maintenance, checking and inspection, troubleshooting, repairs and overhauls of

motors/gear system

. Perform other ad-hoc duties as assigned by immediate supervisor

. Maintain a clean, safe working environment

Requirements

. Proactive and able to work independently in a fast-paced environment

. Responsible and dedicated team player

. Class 3 driving licence would be preferred

As a Mechanical Architect you will be the driving force for the development of high-tech, highly complex systems for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. Starting during the pre-concept phase, you act as a counterpart for the Project Manager within T&D for scoping the project and challenging our customer. While going through the different design phases, you will be the driving force who challenges the feasibility and cost-effectiveness of the proposed design solutions, bringing together the multidisciplinary team on a technical level while acting as a technical counterpart on system level with our customers.

Your responsibilities include:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer.
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of (mechanical) concepts.
• Definition Phase: develop Description of System Design Requirements and Specifications and discuss them with internal/external stakeholders.
• System Design Phase: generation of system design concepts and reviews:
• Develop well-considered choices, validated against system requirements
• Definition of high level modules and related technical interfaces
• Monitor that projects stay within agreed specifications.
• Make use of your creativity and helicopter view to find solutions in case of conflicts
• Detail Phase: supervise the creation of 3-D models and drawings, ensuring (sub)module interfaces meet their respective requirements.
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production.
• Production release: release the design for production.

Requirements:

• Master’s Degree or PhD in Mechanical or Mechatronic Engineering, preferably with a focus on construction / precision mechanics.
• At least 10 years of relevant working experience (semicon, precision mechanics, or similar).
• Extensive knowledge of mechanic design principles, accurate positioning, dynamic behavior, material properties, strength and stiffness.
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation.
• Experienced in multidisciplinary projects, knowing dependency between electrical, electromechanical and mechanical (sub)systems in both the static and dynamic domain.
• User of 3D design tools (e.g. NX or SolidWorks).
• User of product lifecycle management systems (e.g. TeamCenter or EPDM).

Job Description

• To be able read Hydraulic Circuit Drawings

• Experience in Heavy machinery related to hydraulics such as crane, winch & HPU tc..,

• Experience working in any Marine Vessel /Ships

• Has Knowledge in Instrumentation & Motor Control

Job Requirement

• ITE in Mechanical

• Able to write Service Report

• Able to follow the safety procedure

• Computer Literate

• Can work independently

• Willing to work overseas & accept offshore/onboard assignment

Job Benefits

• Positive and close knitted working environment

• Training Provided

• Onboard Allowances

• Group Hospital Surgical Insurance/ Group Personal Accident Insurance

• Annual leaves starting with 14 days and up to 21 days

Working location:

15 Kwong Min Road

Singapore 628718

Responsibilities:

• Attends and conducts daily toolbox briefing, weekly briefing & to participate PSCC meeting.
• Maintains safe, secure, and healthy work environment by following and enforcing standards and procedures, complying with Class/Client regulations.
• Ensures sub-contractors carry out the work as planned.
• Evaluates project to identify issues and opportunities to improve performance
• Ensures good co-ordination and communication between stakeholders.
• Maintains System & Sub System Mark-up Drawings.
• Ensures to follow-up Overall Commissioning and Completion Documentation.
• Creates Punch List, Updating and closing in PIMS.
• Prepares & follow up for signing Mechanical Completion Dossier (MC), signing (By Client) System Completion Dossier (SCD).
• Coordinates and arranges Tri Party Walk down, Discipline Completion Walk down (DCC) & Mechanical Completion Walk down (MC Walk down).
• Follow ups of completion hand over certificates

Requirements:

• Bachelor’s degree in mechanical engineering or related engineering disciplines, Diploma holders with relevant experience are welcome to apply
• 5 years of relevant working experience in construction of offshore platform industry
• Knowledge in PIMS – Omega365 and ProCo System
• A pass in shipyard supervisor safety course
• Must be a team player & be able to work closely with other discipline supervisors
• Willing to work late hours and rotating day or night shifts

Our Addresses:

Seatrium - Admiralty Yard

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Our Working Hours:

Mon – Thurs: 8:00am – 5:15pm

Fri: 8:00am – 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Descriptions

• Attends and conducts daily toolbox briefing, weekly briefing & to participate PSCC meeting.
• Maintains safe, secure, and healthy work environment by following and enforcing standards and procedures, complying with Class/Client regulations.
• Ensures sub-contractors carry out the work as planned.
• Evaluate project to identify issues and opportunities to improve performance
• Ensures good co-ordination and communication between stakeholders.
• Maintains System & Sub System Mark-up Drawings.
• Ensures to follow-up Overall Commissioning and Completion Documentation.
• Creates Punch List, Updating and closing in PIMS.
• Prepares & follow up for signing Mechanical Completion Dossier (MC), signing (By Client) System Completion Dossier (SCD).
• Coordinates and arranges Tri Party Walk down, Discipline Completion Walk down (DCC) & Mechanical Completion Walk down (MC Walk down).
• Follow ups of completion hand over certificates

Requirements

• Bachelor’s degree in mechanical engineering or related engineering disciplines, Diploma holders with relevant experience are welcomed to apply
• 5 years of relevant working experience in construction of offshore platform industry
• Knowledge in PIMS – Omega365 and ProCo System
• Able to read P&ID and Test Pack Limits.
• A pass in shipyard supervisor safety course
• Must be a team player & be able to work closely with other discipline supervisors
• Willing to work late hours and rotating day or night shifts

• Perform a full lifecycle product development (design, develop, test prototypes, manufacture and implement)
• Design systems and components that meet needs and requirements
• Produce outline designs
• Conduct experiments methodically, analyse data and interpret results
• Test and evaluate theoretical designs
• Identify, formulate and produce effective solutions to emerging problems
• Evaluate final product’s overall performance, reliability and safety
• Alter and modify design to meet requirements and to eliminate malfunctions
• Estimate budget and scope of project
• Solicit observations from operators
• Prepare product reports and documentation
• Engage in lifelong learning and develop new theories or methods

As a mechanical engineer, your responsibilities can vary based on the industry and specific role, but they generally include:

1. Design and Development:Create and refine mechanical systems and components using CAD (Computer-Aided Design) software.
   Develop prototypes and test designs to ensure they meet required specifications and performance standards.
   Use engineering principles to solve design problems and improve product functionality.
   
2. Analysis and Testing:Perform simulations and analyses to predict how components will behave under various conditions (e.g., stress, temperature, and load).
   Conduct tests and experiments to validate design concepts and performance.
   
3. Project Management:Plan, coordinate, and oversee engineering projects from conception through completion.
   Manage project timelines, budgets, and resources.
   Collaborate with other engineers, stakeholders, and clients to ensure project objectives are met.
   
4. Manufacturing and Production:Develop and oversee manufacturing processes and procedures.
   Ensure that products are produced efficiently and meet quality standards.
   Work with suppliers and manufacturers to source materials and components.
   
5. Maintenance and Troubleshooting:Monitor and maintain mechanical systems and equipment.
   Diagnose and resolve mechanical issues or failures.
   Implement improvements to enhance reliability and performance.
   
6. Compliance and Documentation:Ensure designs and processes comply with industry standards, regulations, and safety guidelines.
   Prepare detailed documentation, including design specifications, reports, and user manuals.
   
7. Research and Innovation:Stay updated with advancements in mechanical engineering and incorporate new technologies into designs.
   Conduct research to explore new materials, techniques, and systems.
   
8. Collaboration and Communication:Work with cross-functional teams, including electrical engineers, software engineers, and project managers.
   Communicate technical information clearly to non-engineering stakeholders.
   

These responsibilities can vary significantly depending on the specific sector, such as aerospace, automotive, manufacturing, or energy.

No experience/Diploma in Precision/Mechanical/Mechatronic/Electrical/Electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2400-$2800+OT+allowances>$3K++

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Address: Gul Circle (Have company bus transportation islandwide)

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Responsibilities:

• Attends or conducts daily tool box briefing, weekly briefing and to participate in meetings.
• Maintains safe, secure, and healthy work environment by following and enforcing standards and procedures, complying with Class/Client regulations
• Responsible for day-to-day project supervision for new construction platform on site.
• Ensures work assigned is carried out effectively and productively in order to meet client specifications and requirement.
• Liaises with client's Mechanical Supervisor for inspection.
• Ensures quality check with on sub-contractors on daily basic.
• Ensures good co-ordination and communication between team members, SRM, Engineers and clients.
• Assists with commissioning activities/troubleshooting on site.
• Ensures equipment and vendor package preservation to follow up approved Production planning and control of day to day activities.

Requirements:

• Diploma in Engineering or related engineering disciplines
• Minimum 3 years of relevant experience preferably in the construction offshore platform industry
• Able to multi-task and work in a fast-paced environment
• Good in planning, organising, interpersonal skills and able to work independently
• Willing to work late hours and shift work

Our Addresses:

Seatrium - Admiralty Yard

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Our Working Hours:

Mon – Thurs: 8:00am – 5:15pm

Fri: 8:00am – 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

• Design & model 3D skid system, skid structure, piping GA and other not mentioned shop drawing (cutting plan) for fabrication purpose.
• Maintain proper record for drawings and information.
• Proficient in operating CAD drawings software and drawing construction detailed design.
• Create drawings and models from written and verbal specifications obtained from Engineer.
• Reviewing and checking sketches and drawings for errors before being sent to productions, vendors, engineers, etc.
• Review drawings for completeness and accuracy.
• Systematically saving sketches and drawings on CAD library, keeping the server organized; updating files as jobs progress and revisions are made.
• Continually create, edit, and update standard details for use in projects.
• Complete task assigned by superior and performing other relevant duties when needed.

Are you interested in joining a team that is revolutionizing the resource exploration and navigation industry? Atomionics is developing quantum sensors using cold atom interferometry, where atoms are cooled to nearly absolute zero using lasers. At such extreme temperatures, these atoms behave like waves, enabling precise measurement of forces acting on them.

This technology has vast potential applications, including advancing the zero-carbon energy transition, enhancing the performance of inertial navigation systems, and revolutionizing the global positioning system. At Atomionics, you will have the opportunity to design, prototype, test, refine and manufacture Quantum Gravity Sensors. You will develop solutions to improve the performance of our sensor, while also making it compact and robust for field deployment on projects around the world.

Atomionics is backed by some outstanding investors across private and public sectors, such as Wavemaker, SGInnovate, Cap Vista, 500 Startups, and other notable angels.

Responsibilities

• Work in collaboration with electronics and atomic physicists to develop the system architecture to ensure robustness and reliability in a dynamic environment of atom interferometry sensing systems
• Design the housing and packaging for miniaturized atom interferometry setup
• CAD models for precision manufacturing and fabrication of optomechanical benches
• Structural analysis and characterization to ensure robustness in harsh environment

About you

• An absolutely driven individual with creative problem solving skills, analytical mind, and persistence, ideally, demonstrated
• Experience using Solidworks/Autodesk/other CAD software
• Experience in different manufacturing techniques

Even better if you have

• Worked in a technical student team, or an early stage company environment
• Worked on personal hobby projects (and can brag about them!)

What can we offer you

• A chance to learn about the intricacies of deep tech research, product development, and strategy in a high-growth startup
• Work on the cutting edge of quantum technology
• Develop robust applications for translational research
• A book/hobby project allowance to help you grow and collectively build the Atomionics library
• Board games and curry night

Only open to candidates residing in Singapore. Minimum duration of 3 months, preferably 6 months.

Purpose and Scope

You will provide mechanical maintenance works to support the operations of the Energy from Waste plant.

Key Roles and Responsibilities

• Plan and schedule corrective and preventive maintenance works. Include liaising with operations, prioritize jobs, mobilize work force, spares and allocate resources
• Lead technicians in implementing in preventive and corrective maintenance
• Trouble shoot critical or major plant issues, participate in Root Cause Analysis (RCA) studies, plant improvement initiative, and drive cost management.
• Implement management initiatives to optimize the assets and seek to continuously improve on the methods, procedures and update with the latest developments in the market by adopting a suitable approach like proactive initiatives viz predictive and preventive maintenance activities and default actions like failure finding, redesign and run to failure
• Review budget, monitor spending against budget. control cost
• Upkeep risk registers, take part in safety walkdowns, implement safety initiatives, and ensure that good safety practices are practiced by all parties’ maintenance work
• Develop and establish maintenance procedures, risk assessment and method statements for all maintenance activities to ensure safe execution
• Ensure that maintenance works, and plant equipment comply with Statutory Requirements
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)
• Other ad-hoc duties as assigned

Qualification, Skills and Experience

• Degree in Mechanical engineering
• Minimum 3 years’ experience in a Power Plant environment or oil & gas industry
• Organized and detail oriented
• Good Team player and able to deliver results within tight deadlines
• Strong interpersonal, communication and presentation skills
• Proactive in keeping up with new technologies and looking for solutions to optimize plant operations
• Independent with initiatives, resourceful and positive altitude
• Possess good leadership skills
• Good attitudes and willing to learn from experienced people
• Willing to conduct literature researches for problem solving and carry out root cause analysis

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

Responsibilities:

• Assist Engineer in coordinating and supervising maintenance and overhauling jobs
• Prepare Job Acceptance on completion of Jobs
• Monitor and update job status daily.
• Supervise mechanical / diesel / air-conditioning works
• Liaise with customers and contractors on works to be carried out
• Arrange for inspection / job acceptance
• Carry out general repair and maintenance jobs onboard vessels or in workshops
• Dismantle and troubleshoot for mechanical defects
• Perform testing of equipment to ensure smooth operation
• Perform test run and report to superior on the job completion status

Requirements:

• NTC in Mechanical/Marine/Automotive related field.
• Physically fit with good eyesight
• Possess basic understanding of basic components and functions of mechanical engines or diesel engines
• Able to use IMTE tools such as micrometer, bore gauge and torque wrench
• Able to read simple drawings and service reports
• Possess man management experience for up to 5 technicians
• Willing to work under outdoor environment on site
• Basic working knowledge in MS Word and Excel for status and reporting purpose
• Willing to work in Changi area, with company transport provided

Other Information:

• Location: Changi
• Transport provided at: Jurong West & East, Jalan Bahar, Choa Chu Kang MRT, Bukit Panjang, Woodlands MRT, Bukit Merah, Sengkang, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm