Prepare costing for new project
- Prepare shop/As built drawing for submission to authorities using Autocad software
- Prepare documents for the submission of drawings to relevant authorities
- Going out to sites for checking and inspection
- Any other related work assigned by the Company
- NITEC/Higher NITEC in Mechanical or related field
- Familiar with Autocad software/Microsoft Office
- Do not mind travelling to sites
- With working experience prefered
- Able to work and communicate with people from many other countries

58 RECRUITMENT PTE. LTD

12C5922

67026282

A mechanical technician in a chemical plant plays a crucial role in ensuring the smooth and safe operation of the facility. Their job scope encompasses a wide range of responsibilities, including:

Job Responsiblities

• Responsible for the maintenance, repair, and troubleshooting of various mechanical equipment, including pumps, compressors, turbines, conveyors, and heat exchangers.
• Diagnosing faults, and carrying out repairs or replacements of piping systems, including installation, inspection, and leak detection.
• Maintenance and calibration of instruments used to monitor and control process parameters, such as pressure, temperature, and flow rate.
• Participate in the installation and commissioning of new equipment, ensuring proper alignment, connections, and functionality.
• Perform scheduled inspections and preventive maintenance tasks on equipment to identify potential problems. Adhere to safety procedures and regulations, ensuring a safe working environment for themselves and others.
• Maintain accurate records of all maintenance and repair work performed, including work orders, parts used, and repair details.
• Assist in training other technicians or apprentices.
• Managing the inventory of spare parts and tools.

Skills, Knowledge & Requirements

• Ability to diagnose and troubleshoot mechanical problems effectively.
• Strong safety awareness and commitment to safety practices and regulations.
• Ability to communicate effectively with colleagues, supervisors, and operators.
• Minimum 8 years experience in local process plants

Responsibilities:

• Assist Engineer in coordinating and supervising maintenance and overhauling jobs
• Prepare Job Acceptance on completion of Jobs
• Monitor and update job status daily.
• Supervise mechanical / diesel / air-conditioning works
• Liaise with customers and contractors on works to be carried out
• Arrange for inspection / job acceptance
• Carry out general repair and maintenance jobs onboard vessels or in workshops
• Dismantle and troubleshoot for mechanical defects
• Perform testing of equipment to ensure smooth operation
• Perform test run and report to superior on the job completion status

Requirements:

• NTC in Mechanical/Marine/Automotive related field.
• Physically fit with good eyesight
• Possess basic understanding of basic components and functions of mechanical engines or diesel engines
• Able to use IMTE tools such as micrometer, bore gauge and torque wrench
• Able to read simple drawings and service reports
• Possess man management experience for up to 5 technicians
• Willing to work under outdoor environment on site
• Basic working knowledge in MS Word and Excel for status and reporting purpose
• Willing to work in Changi area, with company transport provided

Other Information:

• Location: Changi
• Transport provided at: Jurong West & East, Jalan Bahar, Choa Chu Kang MRT, Bukit Panjang, Woodlands MRT, Bukit Merah, Sengkang, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

Job Responsibilities:

• Responsible for leading the planning and design of Mechanical engineering works for building services and infrastructure works.
• Review reports, specifications, calculations, drawings and other documents prepared for the different stages of a project.
• Supervise the installation, testing and commissioning of Mechanical engineering works.
• Work together with other disciplines in feasibility studies and design, as well as to ensure excellent service delivery to Clients.
• Job Title will correspond with project experience acquired and individual competency in technical knowledge/skills, project management and contract administration.

Job Requirements:

• Degree in Mechanical Engineering recognised by the Professional Engineers Board, Singapore.
• Ideally registered with the Professional Engineers Board, Singapore.
• Minimum 6-8 years of relevant experience in Mechanical engineering design for building services and infrastructure works.
• Good working experience in a consulting firm with a proven track record in major development projects.
• Conversant with local codes and regulations, and authority submission procedures.
• Strong planning, organizational and supervisory skills.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous.

Roles and responsibilities:

· To do conceptual and detailed machine design with regard to mechanical aspects;

· To prepare solid models, layouts, views and bills of materials for assigned design machine assemblies and sub-assemblies;

· To prepare final design configurations, layouts, solid models and production/engineering data;

· To assist in preparation of machine documentation, specifications, manual.

Job Requirements:

· Diploma or relevant in Mechanical Engineering;

· Will consider fresh-graduate.

· Preferably with working experience in designing automation systems , jig and fixture ,robotics and conveyor system.

· Proficiency with Solid Works is desirable;

· Ability to lead, manage project and communicate well with customers, vendors, engineers, technicians and team members.

No experience/Diploma in Precision/Mechanical/Mechatronic/Electrical/Electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2400-$2800+OT+allowances>$3K++

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Address: Gul Circle (Have company bus transportation islandwide)

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

No experience/Diploma in Precision/Mechanical/Mechatronic/Electrical/Electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2400-$2800+OT+allowances>$3K++

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Address: Gul Circle (Have company bus transportation islandwide)

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

No experience/Diploma in Precision/Mechanical/Mechatronic/Electrical/Electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2400-$2800+OT+allowances>$3K++

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Address: Gul Circle (Have company bus transportation islandwide)

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

No experience/Diploma in Precision/Mechanical/Mechatronic/Electrical/Electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2400-$2800+OT+allowances>$3K++

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Address: Gul Circle (Have company bus transportation islandwide)

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

No experience/Diploma in Precision/Mechanical/Mechatronic/Electrical/Electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2400-$2800+OT+allowances>$3K++

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Address: Gul Circle (Have company bus transportation islandwide)

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Job Responsibilities:

• Perform basic and advanced machine assembly works
• Develop mechanical testing jigs & fixtures and perform testing and validation of machines
• Lead the production team to strictly adhere to production schedule and same time improving the manufacturing process to improve quality, cost, and productivity
• Creates, implements, and monitors KPI indicators on product quality and section capability
• Provide shop floor feedback to Production Engineering and D&D Department
• Assist the Production Manager to provide quality, cost effective and efficient support for launching of new machine models
• Perform machine mechanical setting and inspection checks according to YS standard
• Able to troubleshoot and resolve machine any kind of mechanical non conformance
• Perform machine final mechanical inspection and adjustments for any defects to maintain high level of quality
• Prepare reports on productivity, quality, claims, etc
• Work with engineering and other departments to improve assembly processes
• Monitor the serviceability of measuring instruments or jigs and fixtures and reporting to Supervisor or Manager any non-compliance condition
• Maintain accurate records of inspection result at each electrical process

Job Requirements:

• Bachelor Degree or Diploma in Mechanical/Electrical Engineering
• Experience working in machine assembly environment
• A good track record of supporting the department achieving KPI
• Strong understanding of 5S and HSE knowledge
• Maintain good Quality standards, 5S and safety discipline
• Well verse in Microsoft office (Excel, Words, Powerpoint and Outlook)
• Knowledge of drawing software(Solidworks, Unigraphic, etc)

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

• Cooling Equipment, Chiller
• High Variable bonus + Mobile Allowance + Other Allowance
• Work-Life Balance
• Yearly appraisals salary adjustment（Based on performance)
• Singlife Medical Insurance Benefits

Responsibilities:

• Work closely with customers and engineers to assess equipment needs, and to determine system requirements.
• Prepare project document submissions, and support other team members in execution.
• Performing quality control tasks on equipment, budgets, schedules, plans, and personnel performance and reporting on the project's status.
• Coordinating, cooperating and communicating with team members and other project participants and collaborating to create more efficient project methods and to maintain the project's profitability.
• Ensuring the project's compliance with the applicable codes, safety practices, policies, performance standards, and specifications.

Requirements:

• Diploma / Degree in Mechanical Engineering or related field
• Prefer candidate with min 2 years experience in dealing with ACMV, Equipment Installation and etc
• Prefer candidate with Class 3 driving license.

*Only shortlisted candidates would be notified**

We are looking for Mechanical Engineer :

Job Description:

- Provide support to operations maintenance staff in their work flow, maintaining, repairing and installation of HVAC units and Refrigeration systems. (Main tasks of the job scope)

- Mechanical general work

- Other ad-hoc duties as assigned

Job Requirements:

- Monday to Friday, 8am to 5pm

- Saturaday, 8am to 12pm

- Must be able to support OT on weekdays / weekends if needed

Interested applicant, please resume to [email protected]

JOB DESCRIPTIONS:

• Carry out routine inspection and maintenance on company’s construction equipment
• Dismantles defective equipment and install new or repaired mechanical and electrical parts
• Handles & follows up on equipment issues such as repair & maintenance of electrical and mechanical equipment
• Carrying out mechanical and electrical maintenance, repairing and servicing tasks
• Supervise installation / renovation / replacement works on facilities and equipment which are carried out by vendors / contractors and ensures all works are carried out appropriately
• Troubleshoot and perform minor repairs on M&E services & installation for the building, which includes but not limited to general handyman work in fitting, installation, electrical wiring, plumbing, painter, carpentry and etc.
• Install, test, and commission mechanical and electrical systems and equipment, including heating, ventilation, air conditioning (HVAC), plumbing, electrical wiring, and other critical systems.
• Liaise & supervise the appointed contractors / Term Contractor for any maintenance, repairs and / or renovation works and to ensure standard of work is performed
• Communicate effectively with clients, supervisors, or contractors regarding system status, repairs, and timelines.
• Support foreman / manager in supervision of night site works, ensuring that safety regulations are adhered to when carrying out maintenance works
• Co-ordinate job site activities to consistently meet timeline, customer / client job requirements, SOPs, and statutory regulations
• Carry out any other duties or instructions assigned by the Management

JOB REQUIREMENTS:

• N/O Level/ Higher /Nitec/ Diploma
• Preferably with atleast 5 years of relevant experience in a similar capacity
• Required to work hands-on and in Non-Aircon environment
• Able to be on standby after office hours for any technical / electrical works default.
• Possess knowledge of cable & wiring, AC/ DC drives & inverter motors
• Candidates must have class 3 driving licence. Need to travel from time to time for business needs.
• Able to interpret blueprints, technical drawings and sketches to calculate requirements
• Knowledge on mechanical, electrical and building system, including using of hand and electrical tools
• Regularly inspect and monitor mechanical and electrical systems to detect any performance issues or wear.
• Must be able to read technical manuals and drawings
• Must be able to meet the physical requirements of the job which include bending, lifting heavy equipment and working in confined spaces
• Ability to work in physically demanding conditions and handle equipment with precision.
• Must be able to work shifts, weekends and public holiday when necessary
• Able to manage multiple projects within the scope of work and stay on task
• Able to work well under pressure with minimal supervision

Roles & Responsibilities

The incumbent shall be responsible for, but not limited to the following scope of tasks and duties:

1. Carry out all preventive, predictive and corrective maintenance as directed by the Supervisor and clear completed work from the CMMS data base.
2. Responsible for the proper maintenance on various rotating and static equipment and systems including the plant piping systems and structural support systems.
3. Response and resolve work orders for any mal-functioning for static and rotating equipment in the facility. Ensure minimum down time or timely repairs of production equipment.
4. Determine materials, spares, tools and method required to complete maintenance task safely.
5. Plan and execute machinery condition monitoring and field data collection with production team and engineers.
6. Ensure all plant valves are fully operational and all mechanical components properly grease and lubricated where applicable, including carry out, strip, redress and rebuild of various types of control and plant valves.
7. Supervise and work closely with in-house contractor and equipment vendor to execute maintenance work at the terminal. Ensure safeguards are followed such as valid work permit are issued, wearing prescribed personal protection equipment etc.
8. Liaise with production team with all aspects of mechanical system testing, running, trouble-shooting, carry out material specification checks on all installed piping components such as gasket, bolts, etc.
9. Able to take on additional tasks or responsibilities as assigned by superiors.
10. Able to perform valve line up & LOTO for operations or maintenance preparations.
11. The incumbent shall be part of the Company's Emergency Response Team(CERT) and perform any assigned roles and responsibilities (ie fire fighter etc) for such purposes.

Work Experience

1. Minimum of 3-5 years practical experience in the oil and petrochemical refinery.
2. Experience in hands-on troubleshooting of mechanical/ machinery systems i.e compressor/pump and diesel/gas engine.
3. Familiar with Permit to Work system and local codes, regulations and standards requirement.
4. Proficient in usage of Microsoft Office and trained in the use of the Computerized Maintenance Management System (CMMS); ie SAP.
5. Ability to speak, write and communicate effectively in English.
6. Experience with LNG/Natural Gas or gas engine generator maintenance and operations will be an added advantage.
7. In addition, successful candidate should possess the following personal attributes:

• A team player who can work well in a team and with good listening skill
• High self-motivation with the ability to work with minimal supervision & adapt to changing priorities and assignments.
• Willing to take up new challenges and responsibilities
• Fast learner

Education Requirement

The candidate must possess a Professional Certificate/NiTEC, Diploma in Engineering (Mechanical/ Mechatronic/ Electromechanical) or equivalent.

• Advanced CAD Skills – Proficiency in using advanced computer-aided design (CAD) software to create detailed 3D models and engineering drawings.
• Mechanical Engineering Knowledge – Strong understanding of mechanics, materials science, thermodynamics, and manufacturing processes.
• Problem-Solving – Ability to identify issues in design and find innovative solutions, considering both technical and cost constraints.
• Design for Manufacturability – Knowledge of how to design products that can be easily and cost-effectively manufactured.
• Project Management – Ability to lead and manage projects, including timelines, resources, and cross-functional collaboration.
• Finite Element Analysis – Experience with FEA tools to predict the behavior of mechanical components under various conditions.
• Communication Skills – Ability to clearly communicate technical ideas and collaborate with other teams, including engineers and manufacturers.
• Attention to Detail – A keen eye for detail to ensure designs are accurate and meet all specifications and safety standards.

Employment Type: Full-time

About Us:
WF2 is a leading sub-contractor specializing in high-quality P&S infrastructure and building projects. We are committed to delivering excellence and seeking talented professionals to join our dynamic team.

Position Overview:
We are looking for an experienced Mechanical Drafter cum Quantity Surveyor (Plumbing & Sanitary) to join our team. This individual will be responsible for preparing detailed plumbing and sanitary system designs and drafts while managing project quantities, cost estimates, and budget monitoring. The ideal candidate will have a solid background in mechanical drafting, with a specific focus on plumbing and sanitary systems, along with strong skills in quantity surveying.

Key Responsibilities:

• Prepare detailed mechanical plumbing and sanitary system drawings using CAD software.
• Develop and review detailed plumbing and sanitary system layouts and specifications.
• Perform quantity take-offs, cost estimation, and budgeting for plumbing and sanitary works.
• Prepare and maintain accurate records of materials, labor, and associated costs for plumbing projects.
• Collaborate with project managers to ensure designs align with project requirements.
• Assist in reviewing contracts and tender submissions for plumbing and sanitary systems.
• Ensure compliance with local codes, regulations, and company standards.
• Monitor and track project progress, adjusting designs or estimates as needed.
• Provide support during the construction phase, including site visits and addressing technical queries.

Qualifications & Skills:

• Diploma or degree in Mechanical Engineering, Drafting, Quantity Surveying, or related field.
• Proven experience (1 years) as a Mechanical Drafter with a focus on plumbing and sanitary systems.
• Strong knowledge of plumbing codes, standards, and regulations.
• Proficiency in AutoCAD, Revit, and other relevant drafting software.
• Experience in cost estimation, quantity take-offs, and budget management for plumbing systems.
• Excellent communication, organizational, and time-management skills.
• Ability to work both independently and as part of a team.
• Detail-oriented and able to handle multiple projects simultaneously.
• Knowledge of building codes and safety regulations related to plumbing and sanitary systems.

Preferred Qualifications:

• Experience working with large-scale construction projects.
• Certification in Quantity Surveying.
• Familiarity with CAD and other technical skills required.

Employment Type: Full-time

About Us:
WF2 is a leading sub-contractor specializing in high-quality P&S infrastructure and building projects. We are committed to delivering excellence and seeking talented professionals to join our dynamic team.

Position Overview:
We are looking for an experienced Mechanical Drafter cum Quantity Surveyor (Plumbing & Sanitary) to join our team. This individual will be responsible for preparing detailed plumbing and sanitary system designs and drafts while managing project quantities, cost estimates, and budget monitoring. The ideal candidate will have a solid background in mechanical drafting, with a specific focus on plumbing and sanitary systems, along with strong skills in quantity surveying.

Key Responsibilities:

• Prepare detailed mechanical plumbing and sanitary system drawings using CAD software.
• Develop and review detailed plumbing and sanitary system layouts and specifications.
• Perform quantity take-offs, cost estimation, and budgeting for plumbing and sanitary works.
• Prepare and maintain accurate records of materials, labor, and associated costs for plumbing projects.
• Collaborate with project managers to ensure designs align with project requirements.
• Assist in reviewing contracts and tender submissions for plumbing and sanitary systems.
• Ensure compliance with local codes, regulations, and company standards.
• Monitor and track project progress, adjusting designs or estimates as needed.
• Provide support during the construction phase, including site visits and addressing technical queries.

Qualifications & Skills:

• Diploma or degree in Mechanical Engineering, Drafting, Quantity Surveying, or related field.
• Proven experience (3 years) as a Mechanical Drafter with a focus on plumbing and sanitary systems.
• Strong knowledge of plumbing codes, standards, and regulations.
• Proficiency in AutoCAD, Revit, and other relevant drafting software.
• Experience in cost estimation, quantity take-offs, and budget management for plumbing systems.
• Excellent communication, organizational, and time-management skills.
• Ability to work both independently and as part of a team.
• Detail-oriented and able to handle multiple projects simultaneously.
• Knowledge of building codes and safety regulations related to plumbing and sanitary systems.

Preferred Qualifications:

• Experience working with large-scale construction projects.
• Certification in Quantity Surveying.
• Familiarity with CAD and other technical skills required.

Need to have engineering knowledge, comprehension of technical documents. Excellent written and spoken communication skills • Possess troubleshooting skills in engineering works • Proven leadership skills with a large and diverse workforce o Be able to work in a fast-moving environment, under pressure and long working hours, when needed.

We are looking for an energetic, trustworthy, and self-starter candidate who could be handy in paperwork preparation and supervision at the worksite, overseeing projects, maintaining safety protocols, and implementing site procedures. Our ideal candidate is experienced, responsible, and team-focused.

Project Engineer Job Description

We are looking for a dedicated project engineer to assist with the scheduling, planning, forecasting, resourcing, and managing technical activities to ensure project accuracy and quality. The Project Engineer is responsible for the engineering and technical disciplines of ongoing projects and will establish inspection criteria for the proper implementation of all the elements of a project.

To be a successful project engineer, you should have the ability to work with multiple discipline projects and demonstrate excellent project management and supervision skills. You should also have excellent organizational, time management, leadership, and decision-making skills.

Project Engineer Responsibilities:

Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.

Formulating project parameters and assigning responsibilities to the most capable

employees and monitoring the project team.

Interacting with clients, interpreting their needs and requirements, and representing them in the field.

Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.

Cooperating and communicating with the project manager and other project participants

and collaborating with senior engineers to create more efficient project methods and to maintain the project's profitability.

Reviewing the engineering tasks and initiating the necessary corrective actions.

Developing specifications for the project's needed equipment.

Creating frameworks to measure the project's metrics and data collection.

Establishing field test methods and methods for monitoring the quality of those tests.

Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.

Project Engineer Requirements:

Degree in engineering or a related field.

Minimum 3 or more years' field and project experience.

Excellent computer literacy and knowledge of design and visualization software.

The ability to work with multiple discipline projects.

Excellent project management and supervision skills.

Excellent organizational, time management, leadership, and decision-making skills.

Strong written and verbal communication skills.

Knowledge of applicable codes, policies, standards, and best practices.

A Service Engineer’s responsibilities typically include installing, maintaining, and repairing machinery and equipment, ensuring optimal performance and customer satisfaction.

Job Description :

1. Equipment Installation: Assist in the installation and setup of various equipment at client sites.

2. Routine Maintenance: Perform scheduled maintenance checks on machinery and equipment to ensure optimal performance.

3. Troubleshooting: Diagnose and resolve technical issues promptly to minimize downtime.

4. Customer Support: Provide technical support to customers, address and resolve customer inquiries and complaints in a timely manner.

5. Quality Assurance: Ensure compliance with company quality standards and regulatory requirements during service operations. Adhere to all health and safety regulations and ensure compliance with industry standards.

Job Requirements :

• Diploma or degree in Mechanical Engineering, Electrical Engineering, or a related field.
• Minimum of 5 years of experience in crane service engineering or a related field.
• Familiar with hydraulic system & machinery electric system and understanding the hydraulic system theory.
• Basic knowledge of diagnosing defects and repair mechanical equipment such as heavy crawler crane, excavator or drilling rig, etc

Degree in Mechanical Engineering

Minimum 3 years M & E Experience

Experience in Fire Sprinkler System

Autocad Skills and Computer Skills

independent Self-motivated, hard working and able to work as a team

To assist Project Manager to liaise with clients and consultants on Projects

To co-ordinate sub-contract works

• Design and building of infrastructure/ Water plant / building engineering works (Civil / Structural)
• Conducting technical feasibility study, life cycle study and planning for building engineering.
• Preparation of design report, calculation, drawings, specification, cost estimation and details / schedules for projects.
• Assist Project Manager in up-keeping the project ISO quality documentation and records.
• Evaluation of tenders and preparation of tender assessment reports.
• Assist Professional Engineer in liaison preparation and follow up of authority submission.

Requirements:

• Bachelor Degree / Diploma in Civil / Mechanical / Electrical Engineering
• Minimum 5 years hands-on design experience in building and/or infrastructure projects
• Good project management and technical skills
• Familiar with local code and authority submission procedures
• Team player and able to work independent with minimal supervision
• Proficient in AutoCAD and BIM
• Good communication skills; ability to work well in a team
• Must hold valid Singapore License

Responsibilities:

• Reviews technical specifications, drawings, procedures, and standards pertaining to project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents, and weekly update drawing register form documents controller and distribute to project Quality Assurance personnel.
• Administrates the project's internal quality audit to ensure compliance with the project quality plan.
• Monitors the inspection and documentation activities of the Quality Assurance Inspector to ensure compliance with the inspection test plan and project quality requirements
• Resolves quality-related issues arising from subcontractor and in-house production
• Ensures protection and preservation of various systems
• Ensures updates on electrical completion and mechanical completion progress in the project database
• Assigns the systems to be tested by the various supervisors and technicians involved in the operation
• Reviews the quality work processes to enhance efficiency and productivity
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, Quality Assurance Department, and vendors
• Reports non-conformance and issue improvement notes where necessary
• Any other assigned duties and responsibilities

Requirements:

• Degree in Naval Architecture, Marine and Offshore or Electrical Engineering
• Minimum 3 years of relevant experience in Quality Assurance working experience, and the offshore or marine industry

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

KEY DUTIES AND RESPONSIBILITES:

· Develop detailed project plans, including scope, goals, deliverables, resource allocation, timelines, and budgets.

· Planning and follow up all new and retrofit projects of Sterile filling for the manufacturing site

· Responsible for development of SOPs, quality standard, development, and execution of Qualification protocols with following site QMS procedures.

· Responsible for managing a team of vendors / contractors.

· Techno commercial evaluations of consultants, vendors, and contractors.

· Coordinating with statutory authorities for relevant approvals.

· Complying with operational and personnel standards, regulatory and statutory requirement to ensure efficient, reliable, and uninterrupted operation.

· Ensuring best available technologies are incorporated by design.

· Delivering the project within the budget and timeline approved.

· Ensure smooth handing over of the project to end-users, coordinate and ensure deliverables as per plan.

· Ensure to maintain the highest standards for cGMP requirements for the manufacturing site.

· Ensure to meet required the regulatory requirements (e.g. HSA, FDA etc.) and keep the site audit ready all the time.

· Achieve financial objectives through efficient project management.
Qualifications

Education:

· Bachelor’s / master’s degree in mechanical engineering or equivalent.

· Project management certification: PMP or PRINCE2

Experience:

· Proficient / experienced in the Microsoft project software and project tracking.

· Proficient / experienced in AutoCAD.

· 3~5 years of experience in the green field / brown field area project management.

· Capability handles the pharma project from USD 2-5 million.

Soft Skills:

· Strong problem-solving abilities and analytical thinking.

· Excellent communication and teamwork skills.

· Ability to manage multiple projects and meet deadlines.

· Good investigation and report writing skills.

· Knowledge of industry standards and regulations.(GMP, PICs)

TO APPLY:

Candidates are encouraged to apply this position via email to [email protected] with the following information in the resume.

· Work experiences and job responsibilities.

· Current and Expected salary

· Reason for leaving.

· Date of availability

· Education background

We regret that only shortlisted candidates will be contacted.