As a Service Engineer, you have to :

• Attend to equipment fault at customers’ premises.
• Liaise with the customer and sub-contractors regarding all aspect on the add-on project activities.
• Monitor the progress of the work done closely in order to ensure that the schedule and quality of work are met.
• Ensure that all materials and equipment are delivered on time as per schedule for site installation or rectification of fault.
• To carry out periodic maintenance for our customers.

You should :

• Possess a Diploma in Electronics and/or Electrical Engineering.
• 2-3 years’ hands-on experience in troubleshooting of card access systems, alarm systems, CCTV, etc.
• With good interpersonal communication skills.
• Have a valid Class 3 license.
• Be ready for rotating stand-by duty.

Responsibilities

• Develop technical designs of roadworks and highways, traffic diversion schemes and delivery models according to different standards and requirements.
• Planning and supervising projects.
• Responsible for temporary traffic diversion scheme to suit construction progress.
• Coordination with relevant authorities for purpose of obtaining information and approvals.
• Preparation of Traffic Management Plan (TMP) for construction project.
• Preparation of tender documents and proposals.
• Preparation of Traffic Management Plan for road widening and viaduct construction project.
• Stakeholder management & liaising with different authorities.

Requirements

• Preferably with a Degree in Traffic Engineering and above or equivalent.
• Min 10 years experience in construction industry .
• Able to work as a team, assertive, independent, and proactive.

Performs site engineer responsibilities for

managing all aspects of the construction,

installation, maintenance, and repair of

electrical power lines, electrical systems,

fixtures, apparatus, and appliances.

This individual is responsible for planning,

scheduling, assigning, participating in, and

inspecting the works of power linesmen,

electricians, and trades helpers. The employee

also has responsibility for supervising the

operation of an electrical repair shop. Work

includes the design and construction of

special electrical apparatus and fixtures and

the preparation of specifications and

estimates for construction, repair, and

installation projects. Large scale and complex

jobs are normally inspected upon completion

for conformance with specifications; smaller

jobs are checked for satisfactory operation by

the users of the equipment. Work is

performed under general direction of an

administrative superior and is reviewed

through discussions and inspection of

completed work.

DUTIES AND RESPONSIBILITIES

Plans, assigns, schedules, and supervises the

work of power linesmen, electricians, and

helpers engaged in the construction,

installation, maintenance, and repair of university power lines, electrical systems, fixtures, apparatus, and appliances;

participates in the more difficult work.

Trains and instructs subordinates on detailed

procedures. Conducts periodic inspections and gives onsite

supervision over hazardous or unusual

work assignment is; assures availability of

equipment, materials, and supplies.

Estimates the time and material costs

required for projected jobs; keeps cost and

job records and submits reports; initiates

requisitions for supplies, tools, and

equipment. Troubleshooting of all Electrical &

ELVS PLC Knowledge preferred

Perform & Supervises the installation of all

Electrical & ELVS

Enforces safety regulations, rules, and working

conditions.

Recruits and trains personnel in the safe

operation of equipment and tools.

EDUCATION AND EXPERIENCE:-

Degree or Higher ; 4 years of related

experience including site engineer or lead

experience and considerable experience as a

Lead Site Engineer or any equivalent

combination of training and experience.

Excellent communication skills.

KNOWLEDGE, SKILLS AND ABILITIES:-

Thorough knowledge of the practices,

methods, equipment, materials, and tools of

the electrical trade.

Thorough knowledge of the occupational

hazards and safety precautions of the work.

Ability to supervise the work k of skilled

workers.

Considerable knowledge of the National

Electrical Code for electrical installations.

Ability to interpret and work from instructions,

pencilled plans and sketches, and blue prints.

Ability to communicate and coordinate with

superiors, subordinates, vendors and Ability to estimate materials and labour costs.

Skill in the use and care of all hand and shop

tools and equipment of the electrician's trade.

Job Description

- Managing a part of the construction

project

- Assist in technical advice and supervision

for other members of the staff

- Planning day to day work program of the

project progress

- Ensure projects meets agreed

specifications, budgets as well as

timescales

- Authorizing technical drawings and

engineering plans

- Ad-hoc assignments

Job Requirements

- Diploma in civil engineering or equivalent

- Minimum 1 year experience in landed

property from start to finish

- Good communications skills

Job Descriptions:

* Site coordination, Development & Implementation of IoT Application, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Involve in Project planning, electrical & control, instrumentation / sensor, programming, Testing and Commissioning, Service and Maintennace, Documentation and Training

* Experience in AutoCAD drawing or equivalent will be added advantages

* Ad-hoc engineering support when required.

* Willing to work on fast pace environment.

* Willingness for standby duties or work after office hour or during weekend / Public Holiday

Job Requirements:

* Relevant graduate diploma for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance.

* Fresh graduates are welcome.

* Hands on experience in automation system implementation and support.

* Experience in programming, site coordination and support

* Electrical, instrumentations and control knowledge

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Retrofit Engineer

Do you enjoy being part of team that provides high-quality services for our customers?

Would you like to be in a team delivering world class service to our customers?

Be part of a successful Customer Service team

Baker Hughes Valves is a global technology company that designs, develops and manufactures the highest quality, most accurate and reliable control valves and safety valves products, services and solutions to our customers across a large range of process industries.

Partner with the best

As a Retrofit Engineer, you will be in charge of BoM and technical support for Pressure Safety Valves (Consolidated) and Control Valves (Masoneilan). You will also provide a global engineering support focused on Channel Partners and Aftermarket Centers for the selection, repair, maintenance, and replacement of Masoneilan and Consolidated products.

As a Retrofit Engineer, you will be responsible for:

• Executing design and analysis of assigned projects to develop valves meeting customer application needs, specification requirements, complying with local design/product standards.
• Reviewing customer specifications and “translating” customer specification in to order instructions for manufacturing of valves.
• Providing Retrofit solutions, with bills of material, drawing information, test specifications and processing instructions to meet quality and manufacturing requirements.
• Creating the design review process, ensuring accuracy, quality and design for manufacturability goals are met.
• Enabling the use of design tools (like 2D / 3D CAD (SolidWorks / ProE / UG), Excel, and in-house design calculations.
• Engaging with sales to support the quotation activities.
• Identifying, Own and Enable such initiatives which are in line with business objectives.

Fuel your passion

To be successful in this role you will:

• Have a Bachelor's in Mechanical Engineering (or) Equivalent from an accredited uni or college.
• Have a minimum 12-15 yr of experience in an Engineering Design / Analysis /Scientific / Technical Position.
• Have at least 7 yr of Control Valve and/or Safety valve Design Expertise.
• Demonstrate effective communication and interpersonal skills with the ability to work as a team.
• Have knowledge of control valve and/or safety valves including instrumentation and actuator.
• Have good understanding and experience in Valves regarding applications, Material of Construction, Non-Destructive Tests.
• Have experience with ASME B16.34 and PED, 3D design (Solid works/Ansys), mechanical design & tech writing.
• Have basic knowledge of manufacturing processes such as casting, machining, welding or cutting etc.

Work in a way that works for you

We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns

Working with us

Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.

Working for you

Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:

• Contemporary work-life balance policies and wellbeing activities
• Comprehensive private medical care options
• Safety net of life insurance and disability programs
• Tailored financial programs
• Additional elected or voluntary benefits

Location of Work : Jurong Island

The Resident Engineer shall be the Customer’s main point of contact on site in relation to the Long-Term Service Agreement (LTSA) and shall act as a technical representative of Mitsubishi Power (MPW) in relation to operation and maintenance of the Gas Turbine Combined Cycle (GTCC) Power Plant located in Jurong Island, Singapore.

The Resident Engineer needs to have strong technical knowledge in Gas Turbine Combined Cycle Power Plant. The role requires analyzing operational data to investigate various operation problems on turbines and auxiliary systems, trouble shooting a diverse range of problems that occur during operation and/or maintenance. With the support from the Singapore office and the Service Engineering Head Office in Japan, the Resident Engineer needs to be capable of providing solutions on an urgent basis.

The Resident Engineer must have experience completing Gas Turbine Combined Cycle Power Plant outages successfully and know how to coordinate with various internal stakeholders, vendors, technical advisors and local labour. The Resident Engineer must establish and maintain good working relationships with the Customer, ensuring that the customer’s technical issues and requirements are understood and addressed in an effective and timely manner.

The Resident Engineer shall be stationed at the site in Jurong Island during normal working hours (8 hours per day, 5 days per week, excluding public holidays), and at times when there is a substantial risk of Power Train operation interruption due to problems arising from the Power Train. As the Power Plant provides essential services, in the event of an emergency, the Resident Engineer shall be required to reach the Power Plant within specific required timeframe based on the service agreement with the customer, upon activation by the Customer to support the efficient recovery of the power plant.

Technical Support

The Resident Engineer shall act as the Customer’s interface for the flow of information to and from the Singapore office and Service Engineering Head Office in Japan. Such activities include but are not limited to:

· Establishing and maintaining good working relationships with the Customer, ensuring that the customer’s technical issues and requirements are understood and addressed in an effective and timely manner.

· Responding to and resolving internal and external customer requests for technical issues concerning relevant operation and maintenance matters of the GTCC Power Plant, making use of technical product knowledge and analytical skills while adhering to sound engineering principles, standards, practices and procedures.

· Communicating with and supporting the Customer to act on Technical Information notices to improve or upgrade the plant.

· Proactively identifying potential failures, assessing and controlling operational risks with support from the 24/7 remote monitoring hub and expert support

· Proactively advising and assisting the Customer in planning and executing relevant maintenance activities and coordinating with the Customer and MPW for the preparation of planned and unplanned inspection activities.

· Analyzing, tracking and reporting monthly Reliability, Availability, and Maintainability (RAM) data and relevant KPIs for the LTSA, for the purposes of invoicing and for monitoring performance · against the contractual guarantees and obligations. If necessary, recommend corrective actions.

· Reviewing and presenting the monthly monitoring diagnostic reports to the Customer.

· Reviewing and presenting the inspection findings and outage reports to the Customer.

Maintenance Work Coordination

The Resident Engineer shall be responsible for coordinating all activities provided by MPW under the LTSA, including but not limited to:

· Collaborating with the Customer, various MPW group resources (E.g. LTSA Program Manager, Technical Advisors, Field Services, Engineering) and Local Vendors (E.g. Labour, Onsite Machining, Local Workshop or other Third Party Services) in order to achieve the common goals with the Customer including but not limiting to health and safety, environmental protection, customer satisfaction, unit availability, reliability, performance and emissions

· Presenting and discussing with the Customer the scope and the planning of Planned/ Unplanned Maintenance

· Actively contributing in maintenance planning meetings, pre-outage and post-outage meetings between the Customer and MPW, confirming repair status with Repair Facilities.

· Supporting the Customer in the selection of spare parts to be kept on stock, aiming to increase the timely availability of necessary spare parts while optimizing inventory costs.

· Helping the Customer in selecting tools and equipment required for maintenance of the Covered Equipment.

· Coordinating dispatch of Parts and Technical Advisory Services

Troubleshooting/ Failure Investigations

The Resident Engineer shall be responsible to lead and/or support the troubleshooting of a diverse range of problems that may occur during Plant operation and/or Planned or Unplanned Maintenance, with the support from the Singapore office and Service Engineering Head Office in Japan. Such activities may include but are not limited to:

· Conducting fact-finding and communicating failure data between the Customer and MPW

· Analyzing operational data to investigate various operation problems on the Power Train and Auxiliary systems and suggesting necessary actions.

· Leading or supporting root cause analysis to determine the original cause of failures that led to plant trips or unplanned maintenance.

· Investigating problems that have occurred during maintenance works and be capable of providing solutions on urgent basis.

· Summarizing findings and conclusions in clear, logical and easily understood reports for external customers or internal departments.

Pre-requisites

Education level and relevant experiences

· Diploma/Degree in a relevant engineering or technical field

· More than 10 years of proven related work experience in the Power Industry

· Previous site work experience in Long Term Service Agreements, field service or maintenance and overhaul of CCGT power plants or industrial plants rotating equipment is preferable.

· Previous customer facing experience where there is regular interaction with plant personnel to provide support and resolve problems.

Knowledge and skills

· Knowledge of Gas Turbine Combined Cycle Power Plant Equipment operations and maintenance.

· Good communication skills.

· Able to develop and write clear and concise technical instructions, reports, specifications and recommendations.

· Able to work in a multidisciplinary team with people from different cultures and nationalities.

· Good Knowledge of MS Office software (Word, Excel & PowerPoint)

· Industry standard training courses on NDT, Machinery Diagnostics, Lubrication, Automation, Quality Control, Metrology would be an added advantage.

Site engineers work chiefly on construction projects. They form part of construction management and use their skills and expertise to guide crew members and ensure the successful completion of a project. Site Engineers frequently liaise with clients and negotiate with vendors and suppliers to secure the best deals.

SINOTCC, an Engineering, Procurement and Construction (EPC) firm specializing in PROCESS and GENERAL CONSTRUCTION, is looking for a suitable candidate to fill up the role.

- Bachelor Degree in Engineering (major in HVAC, Mechanical, Electrical, Instrumentation).

- At least 5 years experience working in the Process & Construction Industry

- Independent, hardworking and self-motivated

- Willing to travel overseas (if needed)

- Willing to work over time

- 5.5 days work week

- Salary Negotiable

• Attend to Client’s site surveys, meetings and maintain constant contact/communication regarding project works (In progress and new)
• Work closely with the drafting department to come out with preliminary design (for client’s approval), material take off and cost estimation for the new potential projects
• Carry out cost estimation and prepare quotation for clients
• Overall in charge of project’s delivery schedule, cost control, quality and safety (i.e. ensure that projects are carried out within budget, schedule and with zero rework and safety incident)
• Prepare Risk Assessment for Clients review and approval prior to work start
• Check and ensure proper documentation (such as test packages, as-built drawings etc) are in place prior to project close up
• Ensure overall safety well being of workers in the workshop as well as the on site during project execution
• Attend and participate all Safety Meetings organized by Clients

Big Data Developer (3 – 10 Years)
§ Good understanding of concurrent software systems and building them in a way that is scalable, maintainable, and robust
§ Experience in designing application solutions in hadoop ecosystem
§ Deep understanding of the concepts in Hive, HDFS, yarn, Spark, Spark sql, Scala and Pyspark
§ HDFS file formats and their use cases (eg Parquet, ORC, Sequence etc)
§ Good knowledge in data warehousing system
§ Experienced in any scripting language (SHELL, PYTHON)
§ HortonWorks distribution and understanding on SQL engines (Tez, MR)
§ Java/RestServices/Maven experience is a value addition
§ Control-M development. Monitoring Resource utilization using Grafana Tool
§ Good skillset to create automation scripts in Jenkins & knowledge in working on automating builds, test frameworks, app configuration etc
§ Experience in implementing scalable applications with fully automated deployment and control using Bitbucket, Jenkins, ADO etc
§ Skillset:
o Mandatory: Big Data – Hive, HDFS, Spark, Scala, Pyspark.
o Good to have : Schedulers (Control-M), ETL Tool – Dataiku , Unix/Shell scripting , Knowledge of Integration services of FileIT/MQ and others , CI/CD tools – Jenkins, Jira, ADO Devops – tools suite , Oracle .

JD:
Big Data Developer (3 – 10 Years)
§ Good understanding of concurrent software systems and building them in a way that is scalable, maintainable, and robust
§ Experience in designing application solutions in hadoop ecosystem
§ Deep understanding of the concepts in Hive, HDFS, yarn, Spark, Spark sql, Scala and Pyspark
§ HDFS file formats and their use cases (eg Parquet, ORC, Sequence etc)
§ Good knowledge in data warehousing system
§ Experienced in any scripting language (SHELL, PYTHON)
§ HortonWorks distribution and understanding on SQL engines (Tez, MR)
§ Java/RestServices/Maven experience is a value addition
§ Control-M development. Monitoring Resource utilization using Grafana Tool
§ Good skillset to create automation scripts in Jenkins & knowledge in working on automating builds, test frameworks, app configuration etc
§ Experience in implementing scalable applications with fully automated deployment and control using Bitbucket, Jenkins, ADO etc
§ Skillset:
o Mandatory: Big Data – Hive, HDFS, Spark, Scala, Pyspark.
o Good to have : Schedulers (Control-M), ETL Tool – Dataiku , Unix/Shell scripting , Knowledge of Integration services of FileIT/MQ and others , CI/CD tools – Jenkins, Jira, ADO Devops – tools suite , Oracle .

PROJECT ENGINEER will be under service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.Working in workshop and vessels.
Good communication skills with Ship Owners and Superindents.
Good time Management and work Independently.
To perform any other duties & Responsibilities assigned by superiors from time to time.
Ability to demonstrate and implement cost -saving measures.
Ability to lead to manage project operations, schedule and specifications.
Requirements:- Min 5 Years experience .- Knowledge of MS office.- Able to work OT.- Excellent coordination skills.-

Job Responsibilities:

• Responsible for liaising with Engineering team on technical drawings, layout and clients specifications, clarifying system isometric drawings, equipment foundation drawings, drawing of parts, material lists and additional drawings for production support
• Prepares planned schedule for logistic and manpower arrangements under the supervision of senior team members and responsible for the product hierachy in outfitting installation
• Performs supervision on site to ensure outfitting installation work have been safely and appropriately executed according to the arrangement and coordination plans and sequence in outfitting production
• Coordinates with other production team members, subcontractors and consultants to resolve technical issues on-site which affect the outfitting schedule and project deliverables
• Liaises with QA/QC, owners, statutory and classification authorities for completed outfitting installation inspection and acceptance (i.e.piping systems, HVAC, electrical cabling, fitting equipment and equipment foundation) to sign off completion
• Performs on-site checks on the recorded checklists, ensuring the information is accurate and generates reports on work progress for senior team members’ review
• Maintains a high level of efficiency, ensuring good housekeeping, resource optimisation and effective material management to continuously improve the execution of outfitting scope of work
• Continually improves and implements safe work environment, efficient and effective methods for reducing project man-hours, costs and improving schedule
• Identifies, trouble-shoots problems and performs root cause analysis study on recurring cases of defects by resolving to corrective and preventive measures to improve process performance
• Works with other Production team members as required to achieve functional objectives and deadlines
• Provides support in various projects as required to promote cross-functional learning and development, balance team workload and enhance overall team productivity
• Incorporates HSEQ work cultures and best practices to ensure the successful implementation of HSEQ management systems
• Maintains and executes HSEQ procedures, policies and programmes and drives continuous improvement through risk-based thinking and analysis
• Supports the conduct of HSEQ management system audits to ensure compliance with legislations and company policies

Job Requirements:

· Bachelor’s degree in Marine/ Mechanical Engineering, or related engineering disciplines

· 3 years of working experience in planning and construction of outfitting scope of work in the oil and gas industry

· Experience in engineering outfitting activities in marine engineering projects

· Excellent proficiency in English (written and spoken)

· Knowledge and experience in the interpretation of outfitting diagrams, general mechanical drawings and its elements to deliver class approved documents and drawings

· Knowledge of engineering analysis techniques and tools/software applications (i.e.3D modeling software such as Cadmatic or Aveva Marine etc.)

· Familiar with material and equipments (i.e.main engine, generator, pump, deck machinery, mooring equipment, switchboard, etc.) used in outfitting design

· Some knowledge and experience in site inspection standards, class rules requirements and industry codes

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Passionate candidates having a sufficient knowledge and exposure in electroplating processes & the laboratory activities, are requested to submit their resume. Having a minimum 1 year of experience is prefereable for the post. Only the locals and the Permanent Residents are invited to apply for the post.

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 3 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

Job Description

• Liaise with clients to identify and define project requirements
• Coordinate between authorities, management and relevant stakeholders on project implementation
• Liaise/ negotiate with suppliers and sub-contractors
• Carry out sit surveys and submitting proposal for cabling works, project planning, etc.
• Develop or update project plans including information such as objectives, technologies, schedules, costing, and staffing
• Monitor and manage project milestones and deliverables
• Inspection of inventory to ensure working conditions of machines and equipment
• Monitor store inventory, carry out stock take and ensure quality control of project materials
• Ensure project claims are carried out in a timely manner and projects are closed successfully
• Report project status, such as budget, resources, technical issues, customer satisfaction, etc.
• Utilize industry best practice, techniques, and standards throughout the project execution

Requirements

• At least 3 years of experience in telecommunication/ fiber related fields (OSP & ISP)
• Possess at least a diploma in any engineering field
• Possesses a Class 3 driving license
• Able to commit to a 5.5-day work week

We value all applicants and thank you for your interest. However, please be advised that only shortlisted candidates will be contacted.

Your Company

We are a future forward advanced mechanical precision manufacturing company with an outstanding & proven track record for innovation, agility, growth & stability. We are poised for our next phase of growth in the semi-conductor, medical, oil & gas, automotive & optics sectors. Our team is rapidly expanding to fill the next generation leadership roles & advance our current operational capabilities.

Your Role

As our Sales Engineer, you will play a vital role in the company’s revenue growth through obtaining new sales from existing and new customers, as well as maintaining strong business relationship with customers.

Your Calling

· Plan and carry out sales activities (quotation, price negotiation, delivery, etc.)

· Hunter role need to exploring new potential customers and obtain new businesses

· Execute sales and marketing strategies to improve/increase sales revenue

· Liaise with customers and address their feedbacks/issues

· Establish and maintain strong business relationships with existing and potential customers

· Provide sales and technical/engineering support to customers

· Prepare and deliver technical presentation to explain and promote company’s services

· Keep track of orders and ensure timely delivery

· Monitoring competition by gathering current market information on pricing, delivery lead time etc.

· Any other ad-hoc duties as assigned

Your Success Factors

· Min. Diploma Holder in Precision/Manufacturing Engineering or similar field

· Able to read and interpret technical drawings

· Experience in Precision Engineering or related field advantageous

· Have experience in using ERP Systems advantageous

· Outgoing personality with strong interpersonal hunger for success and communication skills

· Initiative and results driven

· Entry level candidate are welcome

Job Description

• Configure and manage critical systems, including Active Directory (AD), telephony, video conferencing, access points (AP), firewalls, VPNs, and more. Monitor and analyse the performance of LANs, WANs, and wireless networks to ensure optimal functionality.
• Configure laptops and desktops for new and existing staff, perform system backups, and handle disaster recovery (DR) as needed. Ensure all automatic system backups are in place.
• Apply system patches after hours to maintain system stability and security. Perform routine system checks to ensure continuous operations.
• Work with third-party support vendors to resolve technical issues. Participate in IT auditing and documentation to ensure compliance with company policies.
• Provide IT support for approximately 200 users, managing user accounts and roles within the ERP system. Troubleshoot login issues, assist with basic system navigation, and resolve minor technical problems.
• Monitor ERP system performance, address minor issues, apply updates, and generate routine reports for departments like finance, HR, and inventory. Customize reports based on user requirements.
• Maintain documentation for common IT processes, user guidelines, and troubleshooting procedures. Optionally, assist with creating and launching new business processes within the company.
• Perform routine backups, monitor system security, and follow compliance protocols under the guidance of the IT team.

Requirements

• Diploma or Degree in IT/Computer Science.
• Possess CCNA / Microsoft certification.
• Proven experience in providing technical support in a corporate IT environment.
• Experience with Veeam and Microsoft 365 administration.
• Familiarity with leading wireless vendors’ products (Cisco/Meraki, Aruba/HPE, Ruckus) is advantageous.
• Knowledge of virtualization technologies such as Hyper-V and VMware is a plus.
• Strong communication and administrative skills.
• Ability to manage multiple tasks and prioritize in a fast-paced environment.

We value all applicants and thank you for your interest. However, please be advised that only shortlisted candidates will be contacted.

Responsibilities

• Data Collection & Reporting: Assist in gathering, organizing and analyz-ing data from web based data, focusing on key performance indicators such as waste and recycling tonnage.
• Liaising with operations: Work closely with operational teams ensure timely and accurate submission of operations data. Provide support and guidance to operations as needed to improve data reporting processes.
• Data Accuracy & Quality Assurance: Perform regular data quality checks to verify accuracy, completeness, and consistency of sustainability data. Identify discrepancies or issues and work with local teams to resolve them.
• Updating of route plan masterlist: Assist in the updating process for new collection data points.
• Liaising with estate managers: Provide estate managers sustainability data in a timely and accurate manner.
• Data Entry & Updates: Ensure that all sustainability data is entered into the relevant tracking systems on time and in line with reporting sched-ules.
• Develop & Maintain Reporting Tools: Assist in creating and maintaining data dashboards and reports that provide real-time insights into sustaina-bility performance.
• Reporting Support: Help prepare periodic sustainability reports and presentations for internal stakeholders
• Collaboration & Communication: Work closely with customer service team to serve as a joint point of contact for sustainability data
• Ad-hoc Project Support: Assist with various sustainability initiatives and projects as required, providing data support and helping to implement new programs or processes

Requirements:

• Have at least 1-2 years of experience in sustainability data or related fields.
• Graduated from a diploma program in Environmental Science, Sustaina-bility, Engineering, Business, or a related field.
• Strong analytical skills, with experience in data collection, cleaning, and analysis.
• Proficiency in Microsoft Excel, Google Sheets. Data analysis tools (e.g., Power BI, Python) is a plus but not required.
• Interest in sustainability and environmental impact, with a willingness to learn and contribute to global sustainability efforts

Purpose: To design, develop, and implement automation solutions for system integration and machine assembly processes to enhance productivity, minimize human errors, and ensure high-quality outputs. The role will focus on leveraging AI and robotics to achieve automated assembly and inspection solutions.

Key Area of Responsibilities:

• Design and implement robotic systems for automated assembly processes.
• Develop AI-driven solutions for process optimization and defect detection.
• Evaluate current manufacturing processes to identify automation opportunities.
• Collaborate with cross-functional teams to integrate automation into existing workflows.
• Integrate robotics and AI systems with MES systems for real-time monitoring and control.
• Ensure seamless communication between automation systems and other manufacturing tools.
• Diagnose and resolve issues with automation systems, including robotic arms and AI algorithms.
• Conduct regular maintenance to ensure system reliability and minimize downtime.
• Train technicians and operators on the use of automated systems.
• Create and maintain technical documentation, including user manuals and troubleshooting guides.
• Ensure automation solutions comply with industry safety standards and company policies.
• Perform risk assessments to identify potential hazards and implement safeguards.

Qualification & Experiences:

• Bachelor’s or Master’s degree in Automation Engineering, Robotics, AI, Mechatronics, or a related field.
• Minimum 3-5 years of experience in automation engineering with a focus on AI and robotics.
• Proven track record in designing and deploying robotic systems and AI-driven inspection tools.
• Proficiency in programming languages like Python, C++, C# or Java.
• Expertise in AI frameworks (TensorFlow, PyTorch) including machine learning algorithm and robotic platforms (e.g., ABB, KUKA, FANUC).
• Familiarity with PLC programming and industrial communication protocols (EtherCAT, Modbus, IoT etc.).
• Strong problem-solving abilities and analytical thinking.
• Excellent communication and teamwork skills to collaborate with multidisciplinary teams.
• Certification in Robotics or AI.
• Safety certifications related to industrial automation (e.g., ISO 13849).

Mandatory Skills

We are seeking a skilled and motivated Data Engineer with expertise in Scala, SQL, and Hadoop to join our dynamic team. In this role, you will design, develop, and maintain scalable data pipelines and systems to process large datasets. You will collaborate with cross-functional teams to deliver high-quality solutions for data storage, transformation, and analytics.

Key Responsibilities

Data Pipeline Development

o Design, build, and optimize scalable data pipelines using Scala and Hadoop frameworks.

o Implement ETL processes for ingesting, transforming, and storing data from various sources.

Data Analysis and Query Optimization

o Write and optimize complex SQL queries for efficient data retrieval and transformation.

o Troubleshoot and resolve performance issues in queries and data workflows.

Big Data Ecosystem Management

o Manage Hadoop-based data infrastructure, including HDFS, Hive, and related components.

o Monitor system performance and optimize resource utilization in a distributed environment.

Collaboration and Problem Solving

o Work closely with data analysts, data scientists, and business stakeholders to understand requirements and translate them into technical solutions.

o Provide technical guidance and best practices for data engineering within the team.

Automation and Monitoring

o Develop scripts and tools to automate repetitive tasks and enhance system monitoring.

o Ensure data quality and consistency through validation and monitoring mechanisms.

Documentation and Compliance

o Document technical solutions, workflows, and processes to ensure knowledge sharing and reproducibility.

o Ensure compliance with data governance and security policies.

Skills and Qualifications

Technical Skills:

o Proficiency in Scala programming and functional programming principles.

o Strong SQL skills, including query optimization and database design.

o Hands-on experience with Hadoop ecosystem tools (HDFS, Hive, YARN, MapReduce).

o Familiarity with other big data tools like Spark, Kafka, or Flink is a plus.

Problem-Solving:

o Strong analytical skills with the ability to troubleshoot and resolve complex data issues.

Communication:

o Excellent communication skills to effectively collaborate with technical and non-technical stakeholders.

Experience:

6+ years of experience in data engineering, big data technologies, or a

similar role.

Job Description

• Oversee the smooth and efficient operation of inorganic chemicals' production
• Evaluate customers' orders with Team Leader and create production schedules to meet deliverables
• Oversee the planning and ordering of Anhydrous Ammonia (skid tanks/cylinders)
• Keep track of NH3 and NH4OH Performance Matrix and account for deviation/breaches captured by the matrix
• Supervise the manufacturing processes are done in a safe and efficient manner
• Oversees and assess the existing processes, workflows and optimizes them through designing, implementing and testing new procedures
• Conduct R&D work for new product/process
• Ensure all production and testing records are properly verified and documented
• Compiling status, performance reports and submitting them to management in a timely manner
• Diagnose problems in the production line and provide recommendations, solutions and necessary training
• Formulate yearly maintenance plan and ensure all maintenance activities in the plant are appropriately carried out
• Ensure all inspection and certification of all pressure vessels are done and properly recorded
• Assignment of delivery escorts to the respective clients and qualification of the delivery escorts
• Review the delivery escorts competency and make appropriate changes
• Ensure safe working environment within the production area
• Perform inventory checks on a monthly basis
• Administer the ISO 9001:2015 system
• To lead on sites ammonia project (eg purging/charging) which includes project planning and execution. These projects entail certain risks and danger during emergency response mitigation and rescue operations
• Demonstrate and encourage a disciplined approach to compliance in all elements of the Company policies, processes and procedures
• Ensure outgoing product meet customers' requirements and specifications
• Review and generate Risk Assessment for all tasks
• Review and generate Safe Work Practices (SWP) for all tasks
• Conduct safety training for the NH3/NH4OH related process to technicians/operators/escorts
• Respond to customers' queries relating to safety, quality and deliverables
• Raise Correction Action Request (CAR) to problematic vendors
• Foster a respectful and collaborative work environment with all co-workers and vendors
• Respond to off hours critical calls to resolve facility/equipment issues
• Sourcing, review and purchase of Ammonia related equipment, accessories and spares
• Any other duties and responsibilities as may be assigned by the superior or Management

Job Requirements

• Candidate must possess at least Bachelor's Degree in Engineering (Chemical) or equivalent
• At least 5 years of working experience in the related field
• Preferably Executive level specialized in Engineering - Chemical or equivalent

1. Closely supervises and monitors the work with the Project team to ensure that the project proceeds according to the contract and deals with any queries, problems and claims that might arise.

2. Coordinate with client for the project interface activities.

3. Interpret Construction and Technical Drawings.

4. Involved in all site meetings.

5. Liaise with site HSE personnel to ensure corporate policies, practices and procedure one met.

6. Managing project deliverables in line with the project plan.

7. Managing project scope and change control with commercial or without commercial impact.

8. Monitoring project progress and performance.

9. Plan monthly works schedule and set productivity to be achieved.

10. Prepare MSRA

11. Progress Claim and monitor invoice status

12. Project Planning, Progress Reports and Claims.

13. Providing status reports to the management.

14. Review and monitor construction activity schedule including the analysis of costs, progress and other productivity data.

15. Supervise/review/prepare all final reports including as built drawings, material reconciliation, close out, etc. relating to the assigned project

16. Technical evaluation of vendor quotation.

17. To initiate and undertake action to prevent the occurrence of non- conformity.

18. To instill ownership priority & timely manner at our culture to work safe and achieve higher quality.

19. To lead and control the workmen to carry out task for installation, fabrication, testing and commissioning of process plant electrical and instrumentation.

20. To monitor the progress of projects against planned

21. To plan, monitor and ensure manpower, materials, equipment and tools are ready for day-to-day work activities.

22. Update and report daily progress status and lookahead minimum 3days plan.

23. Working closely with main contractor and client to ensure the project meets the required needs.

Responsibilities:

• Site preparation and co-ordination, preparation of submission documents.
• Coordinate, liaise and manage various project stakeholders including customers, consultants, sub- contractors, vendors, etc. on site to ensure project requirements are met.
• Able to communicate effective to all stakeholders.
• Prepare and create detail work schedule, manpower and resource planning.
• Able to understand Engineering drawings and perform basic engineering calculations, design, etc.
• Coordinate the safety management system on site.
• Follow up and reporting on the project progress.
• Able to understand Singapore standards or Code of Practice.
• Ensure all site execution with valid approved drawing, Architect Instruction, Engineer Instruction, Written Instruction from client/ main contractor representative.
• Carried out assignment as detailed by the Senior Manager / Project Manager / Assistant Project Manager.

Requirements:

• Candidate must possess at least Diploma/Advanced/Higher/Diploma/ Degree in Electrical & Electronic in any engineering field or equivalent.
• Min. 2 years relevant experience in the Construction Engineering industry.
• Proficient with computer technology and Microsoft Office application (MS PowerPoint, Excel, Project)
• Knowledge in AutoCad, Revit, Naviswork, BIM360 or other design software with strong understanding of Drawings
• Fluent in English, both written & spoken and able to communicate with all levels of team members
• Independent, resourceful, pro-active and team player in a fast-paced environment.
• Possess good organization, planning, strong interpersonal, communication skills and project management skills
• Ability to work under tight deadlines
• Ability to interact effectively with project members and managers at all levels.
• Experience in MV / LV Electrical Equipment (Site Installation, Testing and Commmissioning, Maintenance Testing) will be an added advantage.