Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or related/equivalent discipline
• Experience / knowledge in RTL, C/C++ programming and verification
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours
• C++/SystemC knowledge with High Level Synthesis experience is a plus.
• Experience / knowledge in CMOS Image Sensor is a plus

Professional are responsible for identifying, analyzing, and relating business
demands. Your responsibilities include aligning priorities, planning and actions
to the overall business objectives. And involve business stakeholders. You will
share and communicate knowledge and innovation. You have knowledge of
the fundamentals of the Semco business model and the value chain.
The function is directly responsible to assist the Project Manager in all aspects
of the assigned project.

• Assist Project Engineers in producing telecom system drawings for
approval submission
• Check system compliance for project requirements and translate to project
documents.
• Checking of equipment ordered for a specific project, ensuring technical
compliance with relevant specification requirements
• Provide project progress updates and status reports to Project Manager
• Provide technical support to system assembly and fabrication, and ensure
assembly is done according to project requirements
• Assist Project Engineers to organize and plan usage of available
resources to achieve optimal performance and cost efficiency for each project
• Assist Project Engineer to report, follow-up and resolve on
non-conformance issues and customers’ complaints
• To maintain Semco’s quality policy and take active part in implementing
quality system
• Critical adherence to deadlines
• Assist the Project Engineer to monitor project deliverables in terms of
delivery and quality control
• Assist in site commissioning if required

We are looking for individuals with the following qualifications and experience:

• Education: Bachelor's Degree in Telecommunications, Electrical & Electronics Engineering, Computer Engineering, or IT.
• Experience: Entry-level candidates welcome

Personal Qualities:

• Excellent analytical and problem-solving skills.
• Strong attention to detail and organizational skills.
• Team player with a positive and proactive attitude.
• Excellent communication and interpersonal skills (written and spoken English).
• Ability to work independently and as part of a team.

Purpose: To create, control and manage changes to customer's Technical Product Data (TPD) packages (Items, Bill of Materials, Product specification documents) in the Product Lifecycle Management (PLM) and Enterprise Resource Planning (ERP) systems. To deploy TPD changes to the relevant Persons-in-Charge (PICs) for execution.

Key Area of Responsibilities:

• Check the correctness and completeness of product packages, such as Technical Product Data (TPD) and Bill of Materials (BOM) received from customers.
• Work with the user of TPDs to define the new TPD requirement and update the ISO document (for new customers or any change in TPD requirement).
• Maintain required customer items, BOM, and TPDs in PLM and ERP systems.
• Create and control the item part number, BOM and TPD in the PLM and ERP systems.
• Create projects in the ERP system for the fulfillment of customer Sales orders.
• Implement Engineering Change Order (ECOs) and deploy the changes to the next inline PIC (such as planner, purchaser, process engineer and Sales & Program dept.)
• Check and ensure all required information for the TPD (items, BOMs, documents) and/or configuration change are provided, and approved by the customer.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Science or relevant field.
• Minimum 2 years of working as a product data engineer in the semiconductor industry or similar position.
• Proficient in Microsoft Excel functions
• Good communication skills

Purpose: Responsible for the complete end-to-end planning, direction, and coordination of all the manufacturing processes related to system integration for a specific project. Together with the program team, the Manufacturing Engineer is to ensure that assembly can meet costs, quality, and delivery requirements.

Key Area of Responsibilities:

• Design of production layout to enable production to fulfill build plan forecast or pre-defined production run rate.
• Define requirements for assembly tools and equipment to support product realization and build plan.
• Participate actively in PQP to ensure that risks are identified, and preventive actions defined and implemented.
• Implement a certification program for assembly to ensure that assembly module leads are trained and certified to carry out specific assembly tasks.
• Collaborate with the Process Engineer in the design of the assembly Kit Kart for issue of materials into the clean room and effective handling of materials inside the production area.
• Lead in resolving technical problems faced by Assembly, and resolve internal and customer quality complaints.
• Monitor assembly capacity of the program, and perform ramp assessment when required, to fulfill build plan system delivery.
• Contribute to the system build progress meetings together with the program team to meet on-time delivery targets.
• Evaluate assembly efficiency and implement improvements to achieve the calculated standard time.
• Monitor all customer's consigned equipment to ensure all are inventoried, calibrated, and maintained regularly.
• Identify and implement improvements to shorten production cycle time, improve overall production efficiency, improve quality performance, enhance safety or to boost sustainability.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Mechatronics, Electrical, Precision or Industrial Engineering)
• At least 3 year of experience as an engineer in the manufacturing assembly environment.
• Strategic, creative, and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Main Responsibilities:

• Taking care for infrastructure support such as servers, storages, VMWare, Firewall (Checkpoint), cisco Switches, wireless AP, VPN, etc.
• Assist 1st level / 2nd level support on any technical related issues.
• Administering and overseeing network infrastructure
• Provide support for video conferencing (Microsoft Teams), and meeting equipment, projector, microphone, etc.
• Provide knowledge transfer for the projects deployed to end-users.
• Manage, support, train users for Microsoft 365 services, such as Outlook, OneDrive, SharePoint, Teams, etc.
• Support IP phone, printers, projectors, display TV, CCTV, and door access, with the assist from vendors.
• Any other Technical related tasks as assigned.

Job requirements:

• Min Diploma in IT / Computer Science / relevant field or higher.
• At least 5-years experience in a similar position is preferred
• Knowledge and experience in cyber security will be an advantage.
• Experience in Network, routing protocol.
• Knowledge of Active Directory, DNS, GPO, Office 365, SQL Server, Druva etc
• Good communication skills and fluent in common language.

Expected Start Date: May 2025

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform turn around inspection of pressure vessel, piping and columns.
3. Able to review previous history, ITP, client procedures and NDT reports.
4. Perform corrosion monitoring inspection and coordination with NDT team.
5. Submit daily and weekly reports to client on the inspection findings.
6. Perform QA/QC welding inspections at site.
7. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc.
8. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have more than 15 years’ work experience.
2. Must have bachelor or masters degree in mechanical/Metallurgical engineering or equivalent.
3. Must have valid API 510, API 570, API 571 and API 653 Certificate.
4. Must have Welding inspector certificate under AWS-CWI or CSWIP 3.1.
5. Must have NDT level II certificates in MPI, PT, UT and RT.
6. Must have previous shutdown inspection experience in Shell Bukom Singapore.
7. Knowledge in code book like AWS, ASME, API codes.
8. Must have a good knowledge about MT, PT, UT, RT Methods.
9. Must having an inspection experience in Exchanger, pressure vessels, piping, tanks and columns.

Purpose: To manage and provide technical support of IT systems and networks, to ensure uninterrupted and secured business operation, and compliance with VDL/ETG standards and roadmap.

Key Area of Responsibilities:

• Maintain and update all information technology (IT) systems, devices and peripherals, within the company to ensure stable and reliable performance.
• Maintain and update the company’s network infrastructure and adhere to the parameters & static address tables according to the One-ETG standard.
• Trouble-shoot and resolve all IT-related technical issues and prevent re-occurrences.
• Ensure security and proper access control of all IT systems, networks and data, so that they are free from malware, spyware, hacking, illegal software and unauthorized access.
• Create regular backups of all relevant company data and store it safely, to ensure Business Continuity, in case of systems and/or network outage.
• Research and benchmark new developments in the IT industry, and propose improvements to business processes to save costs and drive for better efficiency and productivity.
• Source, communicate and manage external parties or service providers that provide service support and maintenance to operational IT matters.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Degree in Computer Science/Electrical and Electronic Engineering or other relevant field.
• Minimum 3 years of working as a system support engineer in the semiconductor industry or other similar roles.
• Proficient in Microsoft Excel functions
• Good communication skills

Job Description

• Interpret contract specifications, architectural standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manage budgets; write reports; and carry out additional administrative duties associated with the projects that are allocated
• Oversee architectural planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise and prepare construction and architectural documents and drawings
• Oversee architectural projects, communicate with clients and subcontractors regarding architectural issues, and guarantee the highest levels of architectural workmanship
• Provide the architectural designers with technical guidance on building requirements
• Organize and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in engineering
• Min 3 years of construction experience

Tasks and Responsibilities

• To assist Fire Safety Manager in the implementation of protocols as per Emergency Response Procedure (ERP) to be in line and compliance with Singapore Fire Code requirements.
• To assist Fire Safety Manager in conducting relevant drills as per frequency stipulated by SCDF.
• To enforce on compliance of all Fire safety related legislations and Pollution control matters.
• To develop, plan and conduct training relevant to emergency response scenarios to all relevant staff and contractors within PaxOcean.
• To organise and conduct first aid & rescue related training to all HSE and yard staff.
• To lead appointed CERT members in firefighting, rescue and oil pollution control operations.
• To support in the administration and conduct of all other HSE related training i.e., Safety Induction Program for all staff & subcontractors.
• To be in charge of planning, inspecting, replenishing and maintenance of all emergency response equipment within HSE department Store in accordance manufacturers recommendation and/or industry best practices.
• To support and provide first aid treatment to casualties in times of emergency.
• To ensure that all fire fighting, fire suppression and rescue/ first aid equipment are maintained periodically as per manufacturer’s or Industry best practices.

Job Requirements

• At least 3-5 years of SCDF Experience on Emergency.
• NITEC or higher NITEC or equivalent and above.
• At least 3-5 years of actual front-line emergency response experience including (but not limited to) Firefighting and casualties Rescue, Confined Space Rescue, Work at Height Rescue
• Experience in leading and managing a team of responders for the mentioned emergency scenarios
• Candidates without prior experience are encouraged to apply.

In this role, you will:

• Responsible for machine wiring, troubleshooting, and performing functional checks on electrical systems in prototypes.
• Documenting activities in technical reports and also support for basic mechanical assembly.

Responsibilities:

• Wire prototype machines according to design specifications.
• Identify and troubleshoot electrical issues for prototype machine.
• Perform function check to ensure that the prototype operates as intended.
• Document activities and troubleshooting processes in technical reports.
• Provide supporting basic mechanical assembly

Requirements:

• Diploma in Electrical Engineering or Equivalent
• Able to Interpret electrical schematics, diagrams, and technical documents.
• Independent and ability to diagnose and resolve electrical problems.
• Hands-on experience with machine.
• Good time management, pro-active, self-motivated and high sense of responsibility.

Expected Start Date: May 2025

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform turn around inspection of pressure vessel, piping and columns.
3. Able to review previous history, ITP, client procedures and NDT reports.
4. Perform corrosion monitoring inspection and coordination with NDT team.
5. Submit daily and weekly reports to client on the inspection findings.
6. Perform QA/QC welding inspections at site.
7. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc.
8. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have more than 15 years’ work experience.
2. Must have bachelor or masters degree in mechanical engineering or equivalent.
3. Must have valid API 510 and API 570 Certificate.
4. Must have Welding inspector certificate under AWS-CWI or CSWIP 3.1.
5. Must have NDT level II certificates in MPI, PT, UT and RT.
6. Must have previous shutdown inspection experience in shell Seraya Singapore.
7. Knowledge in code book like AWS, ASME, API codes.
8. Must have a good knowledge about MT, PT, UT, RT Methods.
9. Must having an inspection experience in Exchanger, pressure vessels, piping and columns.

Job Description & Requirements

• Perform general electrical maintenance including troubleshooting and repairing malfunctioning equipment.
• Identify the root cause and conduct analysis to generate solutions.
• Ensure completion of all protective maintenance duties are following the safety standards that complying with company policy.
• Install improvements and major upgrades to process system.
• Provide engineering support in project or plant maintenance
• Alert the Engineer Managers of any unusual incident that have taken place.
• Monitor the equipment process and prevent the equipment breakdown.
• Procedures for inspection, testing and certification of electrical fixed installations.
• Industrial hazards, safety and health precautions, and environmental concerns.
• Installation practice and regulations, and relevant codes of practice.

Job Requirements:

• Good interpersonal and communication skill
• Work independently
• Attention to details
• Good problem solving and observing skills

Purpose: To retrieve and analyse data to determine the company's needs and provide support in decision-making.

Key Area of Responsibilities:

• Understand the stakeholders' requirements and assess the technical feasibility of implementing the best solution to achieve the highest added value.
• Develop BI tools such as reports and dashboards for the various process owners and management to meet business needs.
• Develop automation tools/applications or IT-related solutions to improve the efficiency of the various processes in the organization.
• Develop/source and implement new technologies/capabilities to develop more efficient and secured business processes.
• Identify areas where there is an opportunity to significantly improve the efficiency and security of the business processes, and where there is currently no capability or tool available in-house.
• Create user guides and documentation for the various BI and process automation tools, to ensure usability and maintainability.
• Share the solution, including the user guides and documentation, with the Digital Factory Team so that all BI Engineers can use the knowledge for future projects and back up each other.
• Support and participate in company's continuous improvement program.

Qualification & Experiences:

• Degree in Engineering, Science, Business and Finance or other relevant field.
• Minimum 2 years of experience as a business intelligence engineer in the semiconductor industry.
• Certified Business Intelligence Professional (CBIP) will be an advantage
• Knowledge of Lean Six Stigma
• Proficient in advanced Excel functions
• Knowledge of different programming language (Javascript, Python & C#)

Job Responsibilities:

• Establishes networking environment by designing system configuration, directing system installation, defining, documenting, and enforcing system standards
• Maximizes network performance and optimization by monitoring performance, troubleshooting network problems and scheduling upgrades when necessary
• Oversee maintenance of all IT system in line with IT security policy
• Secures network system by establishing and enforcing policies, defining and monitoring access
• Ensure project tasks are completed on time and project goals are achieved

Relevant experience:

• 1-2 years of experience in network engineering, administration, or related roles

Basic skills required:

• Diploma / Bachelor degree in IT related field
• Strong understanding of network protocols (Eg: TCP/IP, DNS, DHCP, BGP, OSPF)
• Knowledge on LAN/WAN networking, network design, problem solving, network hardware configuration and project management
• Familiarity with cloud networking (AWS, Azure, Google Cloud) is a plus
• Knowledge of network security best practices and tools
• Excellent problem-solving and analytical skills
• Responsible, resourceful, customer oriented and an independent player

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities:

• Oversee the installation, calibration, and testing of instrumentation and control systems
• Conduct functional and performance tests for instrumentation and control systems
• Identify and troubleshoot issues during commissioning and ensure timely resolution
• Collaborate with engineering and construction teams to ensure seamless integration of systems
• Prepare and maintain accurate documentation and reports related to commissioning activities
• Ensure compliance with safety standards and protocols
• Any other duties to be assigned from time to time

Pre-requsites:

• Bachelor's degree in Electrical, Instrumentation, or a related engineering field.
• Minimum 5 years of experience in commissioning instrumentation and control systems in power plant or industrial projects
• Strong knowledge of control systems, instrumentation and DCS
• Excellent troubleshooting and problem-solving skills
• Ability to work in a team environment and communicate effectively
• Project Location: Jurong Island (Transport will be provided at designated pick-up points)

Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Degree/Diploma in Electrical Engineering or equivalent
• Min 3 years experience in machine tool or automation environment
• Experience in CNC Machinery assembly process and automation will be advantageous
• A team player with a sense of responsibility and urgency
• Good interpersonal and communication skills

Expected Start Date: May 2025

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform turn around inspection of pressure vessel, piping and columns.
3. Able to review previous history, ITP, client procedures and NDT reports.
4. Perform corrosion monitoring inspection and coordination with NDT team.
5. Submit daily and weekly reports to client on the inspection findings.
6. Perform QA/QC welding inspections at site.
7. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc.
8. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have more than 15 years’ work experience.
2. Must have bachelor or masters degree in mechanical engineering or equivalent.
3. Must have valid API 510 and API 570 Certificate.
4. Must have Welding inspector certificate under AWS-CWI or CSWIP 3.1.
5. Must have NDT level II certificates in MPI, PT, UT and RT.
6. Must have previous shutdown inspection experience.
7. Knowledge in code book like AWS, ASME, API codes.
8. Must have a good knowledge about MT, PT, UT, RT Methods.
9. Must having an inspection experience in Exchanger, pressure vessels, piping and columns.

· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 3 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

About Beca

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.
We are a growing engineering consulting company based in Singapore, seeking for a fresh graduate to join us as an Engineer – Mechanical (Building Services).

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

In this role, you will be responsible to:

• Perform initial engineering task on the Mechanical services detailed design (including calculations, computer simulations, etc.) for building projects under the supervision of senior engineers.
• Prepare submission to authorities for approval of design
• Attend to project meeting with Client, PM and Consultants from other disciplines
• Attend site project meeting and site inspection, and respond to technical queries
• Liaise with authorities on plans submission and compliance

PRE-REQUISITES

• Degree in Mechanical Engineering discipline
• Able to work independently and exercise initiatives
• Excellent in both written and verbal communication skills
• A team player; Able to interact and work with colleagues and member of other consultants at various level
• Schedule driven and self-motivated

Job Highlights

• Career Development & Opportunities
• Medical Allowance
• AWS, Variable Bonus

Why Beca?

We offer a comprehensive career growth and development programme along with a vibrant and supportive team environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for its people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply now with your CV and cover letter online today.

Please include the following information in your resume:

• Education background
• Work experiences
• Reason(s)for leaving
• Current and Expected salary
• Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

Responsibilities:

• Monitor, support, maintain, and document CIM systems.
• Design, develop, maintain, and improve CIM applications and components.
• Provide Level 2 and Level 3 support for production line operations.

Requirements:

• Degree in Computer Science/Computer Engineering, or equivalents. Diploma with relevant experience acceptable.
• Minimum 2 years of experience in CIM with High Automation, MES, and SECS/GEM.
• Proficient in basic SQL (Oracle) and Java.
• Experience with Tibco (TIB/RV) or high-tech manufacturing environments is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilites

• Assist the Project Manager in producing, analysing and accepting design and technical details
• Assist the Project Manager in developing, managing and overseeing a safety management system for projects across the organisation
• Provide Engineering support to project, production and yard staff as directed by Project Manager.
• Provide technical expertise during design activities and reviews.
• Produce technical documentation as required to support daily operations and tendering activities
• Coordinate stakeholder activities during construction phases of projects not limited to clients, suppliers and contractors
• Create and maintain a culture of continuing improvement in safety performance and awareness across teams & work areas
• Execute Project Plan assigned by Project Manager.

Task Management:

• Preliminary vessel concept work for tendering
• Prepare 2D & 3D drawings/models for construction
• Engineering system calculations to various classification society rules
• Preparation & review of production drawings for construction
• Follow approved company processes as defined in the Strategic Marine Business Management System
• Assist in the development of design office standards / procedures
• Able to take on project management tasks
• Ensure OHSE policies & guidelines are carried out

People Management:

• Provide technical and professional support to junior staff

Interpersonal Management:

• Liaise with Project Managers and Designers
• Liaise with class and flag societies
• Liaise with customers to meet contracted requirements
• Liaise with external design organisations
• Liaise with production departments to provide technical support

Information Management: (Will this person be handling paperwork e.g. reports, forms, invoices, drawings, documentation, etc? What will this involve?)

• Provide regular communications to the Design Manager
• Attend Design & Project meetings and conference calls
• Provide info on work accomplished for B.O.D. reports on monthly basis to the Design Manager
• Ensure proper filing and documentation of drawings, calculations & other project documents in the design server
• Maintain an accurate project design register
• Provide weekly timesheets to Accounts and Design Manager

Personal Management: (How will this person have to behave to be successful in this job e.g. Honest, Reliable Punctual?)

• Open, respectful & approachable
• Act with integrity and honesty
• Continue to develop skills and industry knowledge through a variety of means
• Ability to work unsupervised to meet deadlines
• Flexibility and ability to multi-task
• Ability to mentor and develop junior staff
• Passionate about boats and a desire to work on a range of vessel types