· Preparation of design report, calculation, drawings, specification, cost estimates and schedules for project assigned

· Management of preparation, liaison, and follow up with authority submission and approval.

· Liaison with client, architects, QS and other project consultants throughout the duration of projects.

· Supervise and guide employees assigned to the projects

· Role as project manager

· Implementation of QA/ QC

· Any other duties as assigned

Requirements:

· Degree in Electrical Engineering from a recognized University and eligible for registration with the Professional Engineers Board

· Professional Engineer Certification will be an advantage

· At least 6 years of working experience in engineering design consulting practice on mechanical projects.

· Good project technical knowledge and design softwares

· Good project management and technical skills

· Familiar with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Team player and able to work independent with minimum supervision

· Able to work under pressure with good time management skill

· Good analytical skills would be preferred

If you wish to have the opportunity to work in an international consultancy firm which offers attractive remuneration, a 5-day week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park #06-08

The Strategy Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified.)

Responsibilities

· To optimize airside equipment selection in order to minimize the cost and enhance winning probability for project tender

· To respond to customers in timely manner on changes in project tender requirement

· To process PO, SO, MSR, etc. into the system

· To enter order to factory with accuracy

· To ensure delivery schedule meets customer’s requirement to align with the sales forecast

· Any other duties as assigned from time to time

· Ensure all works carried out in accordance with the specified quality and EHS standards

Requirements

· Education levels should be Diploma in Engineering or equivalent

· At least 1-2 years of experience in relevant job scopes

· A team player, able to work in a team closely

· Meticulous and has eyes for details with pleasant characteristics

· Good communication skills

· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

Geotechnical:

- Experienced in the design and design management of major earth retaining and stabilizing structures, deep foundations, reclamations, ground improvements, slope stabilities.

- Familiar with the preparation of Geotechnical Interpretative Reports.

- Familiar with the geotechnical impact assessment of structures and instrumentations.

- Familiar with the application of geotechnical FEM software.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Responsibilities:

• Work within the Quality Group and the Package Team and liaise with all project team members, such as Engineering, SCM Document Control and Vendor Inspection Coordinator etc.
• Participate in review Material Data sheets. development and issuance of Material Requisition/ RFQ.
• Understands and ensure quality requirements in built into the RFQs and POs documents as well as all the package specific Quality Requirements.
• Review the Technical Bid documents submitted by vendor
• Engages in the review and response to the Technical Clarification on Quality related issues
• Issues Quality Bid Technical Evaluation report for each Bid Package
• Participates in PO award recommendation
• Interfaces with the Vendor Inspection Coordinator wherever source inspection is required.

Requirements:

• Degree in Mechanical Engineering.
• Minimum of 5 years’ experience in equipment procurement for oil & gas/ offshore industries.
• Possess CompEx certified (Module 11), ISO 9001:2015 Lead Auditor, NORSOK / PED requirement, ASME / ASTM / API codes, DNV-GL codes and standards and basic knowledge of NDT

Our Addresses and Working Hours:

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• To provide engineering support to the Project team from validation phase to project implementation

• To identify type of material and equipment requirement during validation phase.

• To involve in preparation and submission of engineering submittals.

• Programming of devices & creating and programming graphics in accordance with the project requirement.

• To assist in Test and Commissioning of system equipment.

• To assist in preparation and submission of operation and Maintenance Manuals.

• To provide Bill of Quantity for the projects.

• Any other duties as assigned by superior

• Ensure all works carried out in accordance with the specified quality and EHS standards

Requirements:

• Diploma/ Degree in Engineering or Building Control in relevant field

• Min 1-2 years of relevant work experience

• Experience in PLC programming is added advantage

• Experience in handling energy management systems/ HVAC systems/ Chiller Plant systems/ Building Management Systems will be a plus

• Knowledge of IT networking and database programming, Function Block programming, Structured Language Programming or HTML5 programming will be of added advantage

• Knowledge of industrial system protocols like BACnet, Modbus, LONTalk

• Strong customer management and problem solving skills

• Able to work with the team and self-motivated

Key Responsibilities:

1) Part of a team who administer, manage and monitoring IT infrastructure on-premise and on-cloud, 8x5.

2) Capture workload including ad-hoc requests by properly logging tickets into types and categories.

3) Analyse IT assets, plan and implement necessary patches.

4) Monitor and manage IT back-up systems.

5) Be on rotation for After Office Hour and Weekend/PH standby/hotline.

Requirements:

1) Singaporean only.

2) VMWare (Must have), Nutanix Foundation or other Virtualization basic (Good to have)

3) Veeam Backup Admin

4) OS Admin Windows Server 2016 and above

5) OS Admin Linux RHEL and SUSE

6) AWS Cloud IaaS

7) Basic Network knowledge (Switches and Routers)

Roles & Responsibilities

The Lead Resident Engineer shall be in the discipline of Electrical, Instrumentation & Control in delivery of large scale power generation project. The Engineer shall have at least 10 years of relevant engineering experience in delivery of large scale industrial/ utilities projects (e.g. waste, water, oil & gas, power) or relevant experience in delivering large solid waste management projects (e.g. WTE, sludge incineration, materials recovery and food waste

treatment).

The duties shall include the following but not limited to:

• Work as owner’s engineer to lead the ICA project implementation at site.
• Assist Chief Resident Engineer in daily supervision and coordination duties for ICA discipline.
• Project delivery planning including time and manpower scheduling.
• Source and interview for Resident Engineers and Resident Technical Officers for ICA discipline
• Strong capability of specification capability for all ICA related specification. e.g. DCS / PLC system configuration, topology and controller, RIO engineering.
• Enforce Specifications, International Standards, Singapore Standards and good practices
• In depth of understanding for automation package for contract implementation of automation systems for WtE project.
• Contracts management of ICA discipline for the WtE project
• Review the EICA submittals from Contractors for Process like Waste Reception system,
• Incinerator-Boiler System, Water Steam Cycle, weighbridge system, building services,
• Enterprise Resources Planning, Communication Network Infrastructure, DCS, PLC, EMIS,PFMS etc.
• Essential understanding of P&ID of process engineering
• Liase with Engineering Manager and the Project Technical Specialists on the review and approval of design submissions including calculations and drawings
• Engage in Technical discussion EICA related issues with contractor and client
• Attend site meetings and resolve technical issues with Contractors
• Define Inspection and Special testing requirement and ensure coordination of those efforts on all contracts
• Ensure the documentation fully complies with the specifications and standards
• Participate in HAZOP review, SIL safety and design for safety workshops
• Work with electrical team closely for all power and process interfaces
• Participation in FAT of automation equipment, DCS, PMS, PLC and RIO
• Provide Technical support in Testing and Commissioning of the plant

Requirements:

• Degree in Electrical / Electronic/Instrumentation & Control Engineering recognized by the Professional Engineers Board
• Registered as Resident Engineer with the Joint Accreditation Committee of the
• Institution of Engineers Singapore / Association of Consulting Engineers Singapore
• At least 10 years of relevant experience in design and construction of large Waste to
• Energy (WTE) project or waste/water management projects in Singapore, particularly experience in power plant or WTE processes.

Job Description

• Design, analysis and plan for security system engineering works
• Liaise with other consultants, contractors, client & authorities from inception to completion of projects
• Responsible for timely submission of design, plans and reports
• Manage projects to meet the time, cost and quality objectives
• Prepare tender specifications and drawings for tendering of construction contracts, including evaluating of tender submissions and make appropriate recommendations to clients
• Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of projects

Requirements:

• At least a good degree in Electrical/ Mechanical Engineering or relevant engineering recognized by the Professional Engineers Board
• Proficiency in Engineering software such as AutoCad, BIM etc
• Candidates with experiences in design of integrated electronic security systems (CCTV, access control system, intrusion detection system etc) or experience with a security specialist contractor / integrator would be advantageous
• Candidates with understanding of latest electronic security technologies would be advantageous
• Candidates with experiences in crash protection measures would be advantageous
• Critical thinking skill, good communication skills and the ability to work in a team
• Self-motivated, innovative thinker and willing to take on new challenges
• Candidates with more than 4 years of relevant experience would be considered for Senior Engineer position

Responsibilities

• Hardware Design, document and develop optimized hardware (PCB Layout and Schematic Capture)
• Testing, bug fixing, improving hardware performance
• Create schematic and PCB Library and Bill of Materials
• Preparing plans and documentation to support product through certification/approval
• Assisting on product issues both during production and in-service

Requirements

• Bachelor's Degree in Electrical or Electronics Engineering preferred
• Minimum 5 years of experience in Hardware Design, Validation, & Optimization
• Proven Experience in High Speed Digital board design with experience in interfacing bus standards like DDR3/4/ LVDS/MIPI/PCIe etc.
• Analog Circuit Design & Simulation
• Experience in developing complex CPU and microcontroller-based systems
• Experience in dealing with regulatory requirements such as FCC/CE
• Experience in Design Tools (Altium Designer, Pads logic and layout, Allegro or OrCAD, Microsoft Office package, JIRA, VHDL, Linux)
• Ability to work in a dynamic environment with good communication and interpersonal skills

Apply now and be a part of a team where your skills, ideas, and expertise truly make a difference! Send your CV to [email protected] for a confidential chat.

PS: However, only shortlisted candidates will be notified.

EnviroDynamics Solutions Pte Ltd | EA License No.: 12C6285

Xie Jiani | EA Personnel Reg No.: R1548854

· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Role Summary/Purpose

Lead Field Service Engineer is a field-based role which requires the incumbent to travel to customer sites across the APAC region to provide specialist installation and maintenance support as directed by his Resource Manager. The role will report to the Resource Manager for SEA region.

Essential Responsibilities

As a Baker Hughes Lead Field Service Engineer you will represent Baker Hughes both technically and professionally to ensure that equipment is installed, maintained and started properly. Your key responsibilities will include:

• Leading a team of Field Service Engineer of site to provide on-site technical direction to skilled labor during during Baker Hughes/GE Aero derivatives Gas Turbine (LM2500) /Heavy Duty Gas Turbines/Nuovo Pignone Compressors (BCL Compressors) /Pumps/Auxiliaries Installation, Maintenance and Commissioning activities on Customer Owned Sites in remote Shipyards, Oilfields, Industrial Facilities and LNG Plant.
• Experienced in Baker Hughes/GE Aero derivatives Gas Turbine (LM2500) /Heavy Duty Gas Turbines/Nuovo Pignone Compressors (BCL Compressors) /Pumps/Auxiliariesmaintenance and services inclusive of minor inspections, major inspections, rebuilds, and refurbishment of the equipments.
• Experienced as site lead/site manager in an Installation, Maintenance, Commissioning Site Activities with proper Customer/Company Schedule Targets Mindset following strictly Quality and HSE Rules.
• Utilizing Problem Solving Skills, Engineering Instructions, Drawings, and Process Instructions during Gas Turbines Commissioning and Start-up Activities.
• Possessing the Technical Capability to troubleshoot and provide routine maintenance checkout for Gas Turbines Products.
• Preparation of job-planning documents based to Assignment’s Scope of Work and be the point of reference on site for all the activity related to Mechanical works on site.
• Communicating effectively with Customer, Site Manager, FSE, Service / Installation / Project Managers on job planning and execution and with Resource Managers regarding site arrivals, departures and job progression.
• Providing input for Daily, Weekly & Final report for outages and installations projects.
• Preparing timely and accurate technical reports for Customer records and as Reference for future Outages.
• Actively participate to customer and/or contractor meeting and be promoter on their recurrence and following action plan.
• Establish through the immediate Report after the Daily HSE Tool Box Talking (mandatory for Baker Hughes/Contractor personnel) the critical activity tasks and remark any HSE aspect to be followed.
• Have knowledge of all Quality procedures and documentation applicable to specific activities and ensure they are properly followed and updated.
• Ensure that Red Flag Review process for New Units Installation is followed and applied.
• Ensure Site Quality Check List/Job Cards/Field Procedure are followed and properly signed.
• Ensure reports and drawings “marked-up” are completed.
• Ensure all RCA and Lesson Learned are addressed properly.
• Ensure all Non-Conformity (technical and materials) are properly addressed using Baker Hughes e-tools and follow up till resolution.
• Ensure compliance with local/current legislation, requests & requirements present in the site Safety Manual.
• Willing to actively participate in NPI (New product Introduction) training to acquire Multiskilling.

Qualifications/Requirements

• Engineering Degree/High School Technical Diploma or equivalent knowledge or at least five (5) years of work experience.
• Significant work experience, preferably in the Energy or Oil & Gas industry.
• Strong knowledge on Baker Hughes/GE Aeroderivates Gas Turbine/Compressors/Auxiliaries installation & maintenance philosophy.
• Fluent oral and written English.
• Strong customer service orientation and the ability to communicate effectively with a range of stakeholders.
• Proven ability to work efficiently without direct supervision.
• Health, Safety and Environmental mindset and compliance

Job Responsibilities:

• Participate new product feasibility study and feature development.
• To designs product according to requirement.
• To support product prototype, build and MP.
• To work with cross functional team members within the organization and customers with different cultures and comfortable to work with virtual team members from remote sites.
• Participate activities in design review.

Job Requirements:

• Mechanical Engineering Degree holder or equivalent degree.
• Knowledge on materials, processes and simulation.
• Good communication skills and good team plater.
• Proficiency with Pro-E design tools or similar.
• Knowledge of international ME test standard such as MIL standard etc.
• Knowledge of Tooling, TA, reliability test.
• Prior experience in mobile, automotive, medical devices is added advantage.
• Experience with product development life cycle and development processes.

Job Description

• Oversee project execution during design, construction and testing and commission works for water and wastewater treatment works or process plant engineering and construction works.
• Lead the technical presentation to Client and Consultant
• Coordinate with Client, Consultant, Client Site Technical Representative(s), Subcontractors and Suppliers during project execution.
• Process Mechanical Work Design in water and wastewater treatment plants and pumping station and pipeline.
• Prepare and submit Process Mechanical Technical particular to Consultant/Client and following up on technical submission till its approval/acceptance by Consultant/Client.
• Control and monitor process mechanical work progress with Sub Contractors and suppliers on the mechanical technical documentation and physical work deliverables.
• Assist PM on progressive monthly claim and payment response matters with Sub Contractors and Suppliers.
• Coordinate with Project QS/PM for establishing of contractual scope of mechanical works and its technical requirements and participating in calling of quotation and assists Procurement Team during awarding of Sub Contract/Supply Contract.
• Prepare O&M Manual and As Built drawings for handing over to client.
• Support PM for project schedule or manpower arrangements.

Requirements

• Degree in Mechanical/Chemical/Environmental Engineering。
• Experienced Mechanical Engineer with qualifications recognized by the PEB Singapore.
• At least 15 years of relevant experience in plant construction fields and preferably in Water and Wastewater Industries in Singapore or in Southeast Asia Region.
• Have experience in water and sewerage pumping station including pipe laying works.
• Good knowledge of Design/Coordination and the Code of Practices and its requirements such as American Standard, British Standard and Singapore Standards.
• Good knowledge of relevant software: Microsoft Office (Word and Excel). Knowledge of CAD, BIM, and Project Scheduling will be an added advantage.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• Minimum 5 years of engineering experience with recognized Degree in relevant field, and at least 3 years of supervision experience of E&M work in construction site for projects of similar and complexity.
• Strong analytical and problem-solving skills.
• Good communication and interpersonal skills.

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years Site/Working Experience

• Schedule routine servicing and maintenance of heavy machinery and small equipment - using time based intervals and vision link for CAT
• Arrange/Deploy mechanics for daily repair and breakdown of heavy machinery
• Come up with weekly and monthly report on outstanding and completed jobs
• Liaise with workshop store and purchasing to order spare parts to create service kit for servicing?
• Renewal of lifting certificate and ad-hoc workshop duties as assigned by management
• Candidate must possess at least a Diploma / Degree in any field.
• At least 3 years' relevant working experience
• Required skill(s): MS Office, MS Word.
• Applicants must be willing to work in Benoi Crescent.

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Key Roles and Responsibilities

• Be the owner of Product Quality and work closely with Materials Engineers, Customer Quality Engineers, and Quality Systems Engineers to enable CMC Materials to supply Worry-Free products to our customers.
• Lead the team to update and maintain manufacturing documentation (SOP, work instruction, batch card, FMEA, Control Plan, RFC, P&ID) to ensure their accuracy and efficiency. Review documents regularly to ensure their compliance with Safety, Quality and other regulatory requirements.
• Own the Management of Change process for any manufacturing process and equipment changes in the plant.
• Own the root cause investigation for any production, quality and customer issues related to the manufacturing process or equipment. Support Materials Engineering team in root cause finding for issues related to raw materials.
• Develop Preventative Maintenance schedule for all existing process equipment and support Maintenance Team to timely execute the PM program.
• Identify and lead continuous improvement opportunities with a data-based approach, balancing the needs of safety, quality, cost, reliability, and capacity.
• Develop a robust SQC/SPC program balancing process capability and customer requirements. Update process parameter control limits at defined intervals and own the trend reviews to ensure all processes are in control.
• Work with Control System Engineers, lab, and Materials Engineers to ensure data accuracy and availability. Drive a culture of data-based decision making.
• Develop transfer functions between customer performance requirements and internal manufacturing key characteristics. Develop/implement control strategies to ensure consistent performance at customers’ locations.
• Work closely with operation associates, shift supervisors, and operation managers to train and encourage production staff to follow procedures and understand the impact of their actions.
• Optimize production process in terms of defining sampling points & frequency, choosing helpful in-process test protocols, and working closely with the control systems team to define all control schemes.
• Drive Best-Practice sharing/transfer among global manufacturing sites.
• Support all corporate EH&S and Quality initiatives.
• Support capital projects where vital to implement new products or processes

Performs other duties as assigned.

Qualifications and Experience

• B.S. in Chemical Engineering is required. MS or higher in Chemical Engineering is a plus
• 2+ years of experience in a chemical processing environment is required. In-depth knowledge with chemical engineering unit operations: mixing, sophisticated filtration, material handling and distillation is helpful.
• Experience with PSM is a plus.
• Experience with AutoCAD or SAP is a plus.

Skills and Abilities / Core Competencies

• Strong problem-solving and statistical data analysis skills are required.
• Ability to multi-task and attention to detail are must-haves.
• Strong verbal and written communication skills within the company and to customers are required.
• Computer Skills – Proficient with Microsoft applications and statistical software such as JMP, Minitab or SAS.

Candidates with more than 2+ years of experience may be considered for Production Engineer Position.

Supporting the Mechanical Maintenance team, you will be responsible for carrying out maintenance works in a safe, efficient and timely manner in accordance with maintenance strategy, to meet planned schedule requirements.

Responsibilities

• Perform preventive maintenance to ensure that plant equipment and auxiliary systems continue to operate smoothly and efficiently
• Perform repair or replacement of defective or malfunctioning components of machinery and equipment
• Assist with the monitoring of contractors involved in maintenance on site and maintain asset maintenance plans
• Attend to work orders allocated by Mechanical Engineers
• Perform other duties as assigned

Requirements:

• Diploma in Mechanical Engineering or equivalent
• Preferably 3 years of relevant experience in Power Plants or related industries will be advantageous
• Self-driven, with a good working attitude, and a good team player.
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

JOB SUMMARY

Duties include generating PCR and engineering drawing and exploring alternate solution to solve resource or production constrain. He is also responsible to plan, organize and manage assigned project activities. This requires direct interaction with customer, vendors and functional departments to monitor and ascertaining all jobs are progressing within schedule and meeting deadline.

RESPONSIBILITIES & DUTIES

• Understand the full requirements of all manufacturing and improvement project. Follow up on the kick start, execution, monitoring and work closely with related personnel to resolve issues until the completion of the project.
• Perform technical review on sales order and work closely with the sales department or customer to clarify all technical specifications and job requirements on the sales order.
• Generate PCR and manufacturing process plan.
• Generate engineering drawings and perform drafting.
• Support Asst. Engineering Manager on the job costing.
• Continuously explore for new manufacturing method or new external providers to support the production.
• Work closely with the Production Supervisor to resolve any production issue.
• Support the procurement department to deal with external providers on all technical issues.
• Understand and be aware of the impact of each activity to the company, its environment and minimize any detrimental results.
• Follow safe work practices and procedures.
• Ensure company and QHSE policies and procedures are adhered to at all times.
• Participate/ attend all functions, activities and meeting organized by the company.
• Familiar with various laser systems as well as advance welding/cladding technique.
• Experience in robot programming for welding/laser cladding.
• Perform other assignment and duties as and when required.

ACCOUNTABILITIES

• Ensure on time issuance of PCR and drawings and correctness.
• Ensure all projects are on schedule and completed on time.
• Work with the team to achieve QHSE objectives.
• Maintain good housekeeping at all times.

QUALIFICATION & EXPERIENCE

• Degree preferably in Manufacturing/ Mechanical Engineering discipline or equivalent.
• Preferably 2 years of relevant experience in the metal machining or oil and gas industries.

Job Description

· Monitor the machines and company equipments operational performance and condition

· Conduct preventive maintenance to machine and company equipments as per schedule

· Review and update all existing machine maintenance documents

· Prepare and design the spare parts for machines and company equipments

· Report any unsafe conditions and practices to Production Manager

· Assist of production and purchasing department of manufacturing / purchasing spare parts

· Monitor spare parts stock level and raising purchase order

· Involve in the implementation and continuous maintenance of HSE Management System

· Perform any other duties assigned by the Production Manager

Job Requirements

Knowledge of precision machining machineries, equipment and facilities

Knowledge of repair and maintenance on machineries and equipment

Knowledge of Environment, Health & Safety

Diploma in Mechanical, Electrical or Mechatronic Engineering

5 years experience in machine repair and maintenance

Job Descriptions:

* Site coordination, Development & Implementation of IoT Application, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Involve in Project planning, electrical & control, instrumentation / sensor, programming, Testing and Commissioning, Service and Maintennace, Documentation and Training

* Experience in AutoCAD drawing or equivalent will be added advantages

* Ad-hoc engineering support when required.

* Willing to work on fast pace environment.

* Willingness for standby duties or work after office hour or during weekend / Public Holiday

Job Requirements:

* Relevant graduate diploma for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance.

* Fresh graduates are welcome.

* Hands on experience in automation system implementation and support.

* Experience in programming, site coordination and support

* Electrical, instrumentations and control knowledge

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Key Responsibilities

• Execute a project or test cut for Aerospace and PM part
• Doing time study and making a fixture concept for Aerospace and PM HV part
• Provide machine operation training to customers.
• Provide on-site technical support to for pre sales activities
• Actively visiting customer for post sales support
• Preparing Aerospace sample for sales usage
• Runoff for HV PM
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Diploma in Mechanical Engineering or equivalent
• Familiar with 3 or 5 axis CAM Programming and Process Development
• High level of interpersonal skills and integrity
• Solid team player
• Good communication skill
• Willing to travel overseas for long term

Build a career with confidence

Carrier Global Corporation, global leader in intelligent climate and energy solutions is committed to creating solutions that matter for people and our planet for generations to come. From the beginning, we've led in inventing new technologies and entirely new industries. Today, we continue to lead because we have a world-class, diverse workforce that puts the customer at the center of everything we do.

Role Responsibilities

• Assist in technical proposal, understand of requirements, perform selection or co-ordinate with factory for technical solution.
• Keep Up-to-Date project status, such as drawing submission, delivery schedule, payment etc.
• Identify and mitigate project risks and liabilities.
• Organize meeting with project stakeholders.
• Actively follow up / liaise with vendors/customer to resolve issue.
• Co-ordinate & follow up with factory for equipment delivery.
• Perform shipment inspection/check, identify any punch if any.
• Attend factory test (local & overseas).
• Participate trade show, exhibition for networking and building customer relationship.

Minimum Requirements

• Min Diploma in Mechanical, or Electrical, Mechatronic, Marine engineering.
• Knowledge in Marine HVAC.
• Familiar with AutoCAD.
• Customer Management & Problem-Solving Skills.
• MS office experience.

Benefits

We are committed to offering competitive benefits programs for all of our employees and enhancing our programs when necessary.

Our commitment to you

Our greatest assets are the expertise, creativity and passion of our employees. We strive to provide a great place to work that attracts, develops and retains the best talent, promotes employee engagement, fosters teamwork and ultimately drives innovation for the benefit of our customers. We strive to create an environment where you feel that you belong, with diversity and inclusion as the engine to growth and innovation. We develop and deploy best-in-class programs and practices, providing enriching career opportunities, listening to employee feedback and always challenging ourselves to do better. This is The Carrier Way.

Join us and make a difference.

Apply Now!

Solar System Design Engineer

Salary : $3,000 - $4,000

Working hour ： Mon to Fri 9am to 6pm, Sat 9am to 1pm

Location : Potong Pasir

Job Description:

Our client is a leading provider in the renewable energy sector, specializing in solar energy solutions for residential, commercial, and industrial applications.

* Design of solar system include layouts, electrical drawing and others labeling.

* Conduct on-site assessments to evaluate project requirements for solar installations.

* Collaborate with the business development team, providing technical solutions and support on-demand.

* Assist the Project Engineering Manager in preparing method statements, engineering drawings, and developing technical solutions.

Requirements:

* Degree in Electrical or Electronic Engineering.

* Open to candidates without experience if they demonstrate a willingness to learn and grow in the role.

* Proficiency in AutoCAD.

* Ability to read and interpret single-line electrical diagrams.

* Ability to work effectively under pressure and meet project deadlines.

Company Name: Nala Employment Pte Ltd | License No.: 16C8302
Contact Person: Soo Yee Hui
Regisration No.: R24120810