Maintain budgets and adjust according to needs as they arise.

Track performance and analyse the completion of key goals.

Document and report project progress to stakeholders and clients.

Problem solving skills with for to manage the pressurised situations.

Coordination and good communication with our own team for project support and sharing experience.

Electrical PLC Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Use Siemens S7-400 PLC to do the HVAC System PLC program. Experience in CPU Redundancy, Modbus Communication Redundancy.
8. Use S7-1200 PLC to do the HVAC Control System PLC program
9. Use Siemens HMI software to do the Touch Screen Program.
10. Fully understood HVAC System D & ID, P & ID.
11. Marine and Offshore commissioning experience are required.
12. Sometimes will go to site trouble shooting.
13. Contact with client about the project requirement.
14. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

Electrical Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Fully Understand PLC control system.
8. Fully understood HVAC System D & ID, P & ID.
9. Marine and Offshore commissioning experience are required.
10. Sometimes will go to site for trouble shooting.
11. Contact with client about the project requirement.
12. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Key Responsibilities

• Lead AM materials development, manage projects involving multiple stakeholders. Use materials-process-performance research methods to investigate, solve, and deliver project objectives.
• Lead metal AM application and parts development projects including parts selection, design, prototyping and manufacturing
• Operation of metal AM machines and auxiliary equipment, including maintenance troubleshooting, and risk assessment
• Execute customer projects using AM materials and applications knowledge, to meet project deliverables and deadlines. Support in FEM simulation for DfAM.
• Provide technical support for addressing technical inquiries related to the development process, quality assurance, and analytical problems.
• Produce technical reports and presentations for AM project development

Job Requirements

• Masters/PhD in Engineering, Mechanical/Materials or equivalent
• 5-7 years of working experience with AM materials-process-performance characterization and analytical tools.
• Experience in LMD and/or L-PBF machine operations
• Proficient in 3D modelling and 2D drawing using Solidworks
• Experience in CAM and Siemens NX
• Experience in FEA/FEM
• Strong understanding of LMD process and materials, key process variables.
• Experience with parameters development, material characterization methods
• Experience with LMD machine operation
• Proficient in statistical tools like DOE
• Familiar with metal AM process chain
• Able to work independently and self-motivated

· Degree in Mechanical Engineering

· Minimum 5 years relative Design Experience in Marine Industry

· Able to independently do calculations, develop ship piping system Engine Room Layouts, HVAC, Shafting, etc

· Able to develop Specifications related to Machinery

· Knowledge of different classification Rules Regulations SOLAS,MARPOL,IMO,MEPC etc

· Able to liase with Class, Owner’s Yard & Clients

· Should have adequate knowledge of pipe routings,

· Knowledge of Piping Standards

Tasks and Responsibilities

• Assist Section Project Lead in day to day operations.
• Perform the assigned mechanical task under quality and schedule.
• Advise the project’s design mode & standard
• Familiar with Class regulation/rules, product, standard
• Report the project daily discipline (Man-hour/Schedule etc.)
• Able to work with other team members for the overall progress of the project
• Feedback for profession’s design mode & standard
• Train & Guide the other project mechanical engineer (AE or draft man) to work together.
• Study & Solve the project issues under mechanical responsibility
• Attend and report in project and section meeting
• Complete the assigned task for different project drawings or documents.
• Support Project Section Lead in Mechanical Technical issue.
• Coordinate with Shipyard /Consultant / Vendor
• Responsible to Mechanical Project Section Lead/ Mechanical Technical Lead
• Project Handling- New building project, Repair, Upgrading, Conversion project.

Job Requirements

• Minimum 5 years of relevant work experience in the marine/offshore industry Machinery/ Piping new-building engineering design.
• Familiar with Auto-CAD/ Microsoft Office/ AVEVA
• Familiar with Rules and Regulation from Classification Society and Authorities.
• Familiar with theory and calculation of marine/offshore Mechanical & Piping Design.

Job Description:

• Update and control of Mechanical Engineering specification,procedure and drawings in CMMS (Computerized maintenance management system).
• Register, control and maintenance of assets management in CMMS.
• Material Management including consumables,parts and spare units in CMMS.
• Respond to breakdowns, diagnosing faults, record and report in CMMS.
• Review and approve of service, repair and overhaul equipment, record and report.
• Managing staff “shift or on-call' work as necessary.
• Planning and supervising scheduled maintenance, improvement and investment works.
• Contract and evaluation of cost including technical proposal on improvement and investment works.
• Managing vendors, suppliers and contractors including performance appraisal.
• Managing staff KPI (Key Performance Indicator), appraisal and training plan.
• Ensuring compliance with machinery and equipment statutory requirements.
• Ensuring compliance with QEHS (Quality, Environment, Health and Safety) legislation.
• Managing routine 5S at the maintenance workshop, store and work area at site.
• Provide training to Supervisors and Technicians if needed.
• Responsible for maintaining and improving availability of rotating equipment across the Plant.
• Develop and ensure data quality for documents uploaded in the CMMS.
• Develop Mean Time Between Failure, Mean Time to Repair, Failure Mode Effect Analysis template for rotating equipment and implement it.
• Develop and monitor the performance of the rotating equipment.
• Deliver quick and effective technical solutions and proactively interface with other discipline leads for resolving issues.
• Identify bad actors in the plant and reliability improvement.
• Initiate the engineering management of change and execute the changes for plant improvement and modification work.
• Develop and maintain Standard Operating Procedures and Risk Assessments for the maintenance of rotating equipment.
• Planning and execution of all rotating equipment preventive and corrective maintenance.
• Condition monitoring of rotating equipment through online and offline vibration analysis, oil analysis and other techniques.
• Develop training plans for Operations & Maintenance Teams.
• Prepare estimates and budgets for rotating equipment.
• Ability to work weekends, holidays and respond to callouts on a non-routine basis.
• Other duties as assigned.
• Safety is a core value at Veolia, and a precondition for employment. You are expected to uphold the Veolia Always Safe rules and set an example to all colleagues in your daily work routine
• Ethics and compliance are two areas where our rules and our standards are strictly non-negotiable. You are expected to stick to ethics and compliance rules and standards which ultimately mean doing your job properly and conducting our business like true professionals, whatever our missions and our place in the Group

Job Requirements:

• Degree or Diploma in Mechanical Engineering or Maintenance Reliability Engineering field.
• At least 6 years of working experience in engineering with EPC/EPCM contractors or in Operation & Maintenance in the Oil, Petrol or Chemical plant or similar.
• Knowledge in Refractory repair work is an advantage.
• Strong desire to work in a leading edge industrial environment with a strong focus on reliability and efficiency.
• Strong Verbal and written communication skills.
• Proficient in Computer Skills such as Microsoft Office, Microsoft Project, Auto Cad, CMMS, etc.
• Able to work independently and in a team to achieve departmental goal of lean production.
• Knowledge of Maintenance and Asset Management is an advantage.
• Good knowledge of industrial standards such as API, ASME etc.
• 
  

Successful candidate will be working in the main office located at 15 Tuas View Circuit, Singapore 636968. Company transport is provided.

Job Description

• Develops and manages new designs in accordance with project requirements and objectives, while adhering to project milestones and schedule.
• Conduct feasibility studies, FMEA, cost analysis and material selection to support design decisions.
• Collaborate closely manufacturers, and suppliers to address technical challenges through DFM & DFA and ensure successful implementation of designs.
• Prepare and present design proposals, progress reports, and project updates to stakeholders, while abiding to timely delivery within project’s budget.
• Utilizes SolidWorks software to generate detailed 3D models and technical drawings for prototypes and production.
• Setup test plans using DOE methodology, analyze test results and iterate design to meet performance and quality standards.
• Participate in team design reviews, providing constructive feedback and contributing to continuous improvement initiatives.

Job Requirements

• Bachelor’s Degree in Mechanical/Material Engineering is required.
• Min 3 years’ design experience in a product development environment, contributing to a product’s successful delivery into series production will be preferred.
• Proficiency in CAD software for 3D modeling and technical drawings, SolidWorks knowledge will be preferred.
• Strong understanding of materials and manufacturing processes. Knowledge in machining, metal forming, heat treatment and casting are preferred.
• Knowledgeable in design principles, such as springs, bearings and hydraulics, and in theoretical calculations related to the field of statics, dynamics and kinematics.
• Keen interest and experience in a hands on approach towards the construction of prototypes and testing.

• To plan, coordinate and execute quality assurance and quality control of project.
• To ensure all products are executed in accordance to contract specifications.
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control.
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload.
• To conduct QC inspection and record on all the incoming materials.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• To prepare all the Quality-related reports.
• Any other ad-hoc duties as and when assigned

Established in 2010, the Energy Research Institute @ NTU (ERI@N) is a pan-university research institute that focuses on systems-level research for tropical megacities. It performs translational research that covers the energy value chain from generation to innovative end-use solutions, motivated by industrialisation and deployment. ERI@N has multiple Interdisciplinary Research Programmes which focus on translational Research, Development & Deployment which focus on specific area of the energy value chain, and a number of Living labs and Testbeds which facilitate large scale technology deployment enabling validation and demonstration of real-world applications.

We are looking for a Project Officer.

Key Responsibilities:

• Synthesis and characterization of battery materials and fabrication. Precipitation, characterization and purity analysis of products by various characterization techniques
• Carry out optimization of the equipment and SOP of various processes for batteries
• Strategies and experiments related to recycling and upcycling of batteries including lab management
• Scoping of recycling strategies and innovation in battery recycling
• Prototyping activities including proof of concept demonstration of successful processes
• Responsible for project goals, deliverables, and objectives of the company project
• Preparing and delivering meeting presentations, notes, updates, and reports as per the request of the project

Job Requirements:

• Possess at least a Bachelor’s degree in Engineering /Science (Materials/Chemical/Mechanical/Nanotechnology/Physics/Chemistry or equivalent)
• Experience in materials and extraction methods of metals from batteries
• Experience in prototyping of batteries and working with various battery systems.
• Widely experience in various materials synthesis techniques
• Experienced in materials characterization, electrochemical battery fabrication
• Ability to conceptualize and communicate research work to other staff, management, and visitors
• Knowledge of scientific or materials engineering software will be an added advantage.
• Prior experience in the field of research is an added advantage
• An effective team player with good communication & interpersonal skills
• Ability to work in a team as well as independently.

We regret that only shortlisted candidates will be notified.

• Assemble and install mechanical systems for industrial, electromedical, and manufacturing purposes Implement cost-effective changes in equipment design to improve reliability and safety
• Assist mechanical engineers in developing, building and maintaining machines and tools
• Read and interpret engineering designs, plans, and diagrams for piping, transmission, and HVAC systems Prepare cost and material estimates for a project
• Test and analyze machines, tools, and components to determine their performance, strength and response to stress
• Design manufacturing implements such as jigs, dies, and moulds
• Carry out inspections to identify faults and initiate repair of mechanical systems or products
• Monitor mechanical processes to ensure conformance to standard project procedures Use CAD software and technology to prepare drawing plans and design for an engineering project
• Assemble components or machine parts to form integral or complete product unit
• Provide technical solutions to mechanical problems found in a variety of industries
• Develop and design prototypes of equipment
• Ensure compliance with health/safety procedures and regulations
• Implement quality control systems useful in evaluating and testing mechanical processes/product for consistency.
• Liase with various departments to completed the job.
• Report to Management Level

Requirements

Degree in Engineering Mechanical Engineering

Working Location : Jurong West

Working days : Monday - Friday (5 Days)

Shift Work required ( Rotation work at Saturday & Sunday)

Require to work at Night Shift

Addcel has been delivering deep value to clients across the Oil and Gas, Petrochemical, Energy, Pharmaceutical, Data Centers, Environmental Solutions and Infrastructure industries since 2010.

Specialising in Design & Building of utility systems, prefabrication/ DFMA works, facility & plant maintenance and construction implementation such as structural steel, piping, storage tanks & silos as well as the equipment installation, we take pride and passion in all that we do.

The Project Engineer reports to the Project Manager and is responsible for the below:

• Prepare and submit required documents for Project, working with respective stack holders based on project proposal.
• Prepare and maintain the project document summary.
• Upon confirmation of project resources, update other stakeholders to prepare submission and record for final MDR.
• Prepare and follow up with Engineering and drawing related documents.
• Receive, review, update and issue latest revised drawing to project team.
• Prepare and monitor STQ / RFI for technical details.
• Preparation and updating of project schedule.
• Prepare and update Regular reports and Project Forecast.
• Base on approved layout and schematic drawings, prepare and update MTO upon approval from client.
• Escalate any abnormalities compared to bidding quantity to PM and procurement team.
• Update the revised MTO (material take off) to project team, ensuring material availability as well as manpower resources.
• Attend daily toolbox meeting.
• Update Project managers about the progress, plans and challenges.
• Assist in the preparation of the complete subcontract Scope of Work.
• Work with all stakeholders to ensure that we have the latest equipment connection drawings.
• Prepare, monitor and update status to procurement, and submit monthly progress claim.
• Record additional works and variation orders.
• Prepare variation claim with proposal team.

To be a good fit, you would possess these qualities and skills

• Bachelor’s degree in Engineering or equivalent.
• Min. 3 - 5 years of relevant working experience, preferably managing projects for Semi-con, Pharma & Oil & Gas.
• Proficient knowledge in AutoCAD software & Microsoft Office.
• Able to work independently and as a team with good prioritization skills.
• Good time management.
• Good communication skills, both verbal and written.
• Enjoy challenging yourself in a fast pace environment.

Join us in adding value everyway and creating value everyday with pride and with passion!

Responsibilities:

· You will promote and propose Trane Chiller & Equipment to building consultants and contractors

· Responsible for developing long term customer relationships

· Building close business relationship with customers especially key accounts

· Maximizing account penetration and customer retention

· Identify potential opportunities & develop solutions with existing & new customers

· Update forecast timely into the system

· Negotiates value, addresses resistance, and close the sales. Differentiates & made Trane as preferred supplier

· Any other duties as assigned from time to time

· You also need to ensure all works carried out in accordance with the specified quality and EHS standards.

Requirement:

· Degree in Mechanical/ Electrical engineering or its equivalent

· 1-2 years in Engineering sales, experience in HVAC industry will be a plus

· Customer driven with excellent communication & interpersonal skills

· Candidates with the relevant education qualifications but no prior work experience is welcome to apply

Responsibilities:

• Promote and propose Trane Controls Solutions to building owners, consultants and contractors

• Develop long term customer relationships and maximize account penetration and customer retention

• Identify potential opportunities & develop solutions with existing & new customers

• Work closely with other department to promote package solution and enhance the win rate

• Ability to effectively writes and presents proposals.

• Negotiates value, addresses resistance and closes the sale. Differentiates & made Trane as preferred supplier.

• Ensure all works carried out in accordance with the specified quality and EHS standards.

Requirements:

• Diploma/ Degree in Mechanical/ Electrical engineering or its equivalent

• At least 1-3 years’ experience in selling HVAC or building automation system

• Good presentation, interpersonal and communication skills

• Customer driven mindset

Job Description

• Online and Offline Partial Discharge Measurements for HV electrical assets such as cables , transformers, switchgears , motors and generators
• Offline Cable testings (Hi-pot test, Megger test, Tangent Delta test) above 6.6kV rated Cables
• Infra-Red Thermography for HV and LV Switchboards
• Lightning protection and earthing system measurement.
• Assist to servicing maintenance work by project teams.
• Handling of multiple test equipment from Omicron, Doble Engineering,Qualitrol, IRIS Power, EA Technology, HVPD, PDS, B2 and IPEC

Requirement

· Bachelor Degree in Electrical Engineering (Preferably SIT, NTU)

· Training will be provided and fresh graduates are welcomed to apply

· Good interpersonal and communication skill.

· Team player & able to work independently

Transport is provided from 6 MRT pickup points ie Paya Lebar, Serangoon NEX, Bishan, Jurong East, Joon Koon, Woodlands

13th Month & Variable Bonus

Responsibilities:

• Attends / conducts daily tool box briefing, weekly briefing & to participate PSCC meeting.
• Maintains safe, secure, and healthy work environment by following and enforcing standards and procedures, complying with Class/Client regulations.
• Oversees day-to-day project supervision for new construction platform
• Ensures work assigned is carried out effectively and productively in order to meet client specifications and requirements
• Monitors on structure work progress activities.
• Reports on the structure project progressEnsures sub-contractors carry out the work as planned
• Evaluates project to identify issues and opportunities to improve performance
• Identifies and resolve structure interference and propose modification onsite if necessary.
• Monitors drawing and technical information
• Conducts Risk Analysis assessment

Requirements:

• Bachelor's degree, Diploma in Engineering
• 3 – 5 years of relevant working experience in construction of oil & gas offshore platform project
• A team player & be able to work closely with other discipline supervisors.
• Willing to work late hours

Our Address and Working Hours:

Seatrium - Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thurs: 8am - 5:15pm

Fri : 8am - 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Ensure that all works carried out are of highest quality standard to meet customer satisfaction.

§ Execute the site testing and commissioning activities of the company to the satisfaction of the owners and builders

§ Liaise with Yard’s commissioning personnel to close out issues which will affect the smooth completion of project

§ Ensure that Punch List are corrected and Test Memo and Service Acknowledgement Report are signed

§ Ensure that site issues are highlighted to the Production Manager/Assistant Production Manager in order to come up with proper and timely solution

§ Inform the project engineers in the event of changes on design, drawings and system operation which may arise during the job execution.

§ Highlight to Project Engineers any changes that may be required on supplied equipment for quality improvement

§ Ensure that the equipment used for commissioning are calibrated and maintained in good working condition to achieve quality standard.

§ Ensure non-conformity report is being raised as and when necessary.

§ Ensure that non-conformances are promptly resolved by means of investigation and corrective action.

· Assist Sales / project team in Technical and Engineering support

· To execute Sales/project coordination and report to Sales/Project Engineer

· To execute production order and co-ordination with internal department and customers

· Liaise with customers on technical analysis, engineering calculation and submission

· Troubleshoot and able to service electronic / mechanical faults on equipment.

· Ensure all work complies with industry standards, codes, and safety regulations.

Job description

Non-Destructive Testing (NDT) technicians examine structures, vehicles, and products for flaws and structural weaknesses using non-destructive testing techniques. They conduct material tests, interpret the results, and generate reports on their findings.

Requirements

Bachelor's degree in mechanical engineering, structural engineering, or a similar field.

Relevant NDT certification.

10+ years' experience as an NDT technician.

Advanced knowledge of NDT technologies including ultrasound, infrared, and radiographic.

We seek a highly skilled and experienced Facility Engineer to oversee the maintenance and operations of our facilities. You will play a crucial role in ensuring functionality, safety, and compliance while leading our maintenance team. The ideal candidate will have a strong technical background in mechanical or electrical disciplines and extensive experience in facility management and supervision. Proficiency in English and Mandarin, along with excellent communication and negotiation skills, is essential for liaising with contractors, local authorities, and stakeholders.

RESPONSIBILITIES

· Oversee the maintenance and repair of facility systems, equipment, and infrastructure.

· Supervise contractors, including negotiating pricing, scheduling, and quality control.

· Ensure compliance with local codes, safety regulations, and environmental standards.

· Prepare reports on maintenance activities, budget expenditures, and project progress.

· Serve as the primary contact for local authorities, obtaining permits, and ensuring regulatory compliance.

· Develop and implement emergency response procedures.

· Lead and mentor the facility maintenance staff, providing guidance and training.

JOB REQUIREMENTS/QUALIFICATIONS:

· Diploma in Mechanical or Electrical discipline or certification in facility management.

· Minimum of 5-7 years of experience in facility management, with supervisory roles.

· Proficiency in English and Mandarin, with strong communication skills.

· Ability to write reports, plan schedules, negotiate prices, and supervise contractors.

· Familiarity with local codes, safety regulations, and environmental standards.

· Class 2 or 3 driving licence required for travel to various facilities.

ATTRIBUTES:

· Ability to lead and motivate teams, fostering accountability and teamwork.

· Strong analytical and problem-solving skills.

· Flexibility to adapt to changing priorities and deadlines.

· Meticulous attention to detail for accurate documentation and compliance.

· Excellent organisational skills to manage multiple tasks and projects.

· Clear and effective communication skills for conveying technical information.

We are seeking a highly skilled and motivated Service Engineer to join our team. The ideal candidate will be responsible for providing technical expertise, performing maintenance, and delivering support services to ensure the efficient operation of equipment and systems.

• Designing and developing electrical systems for marine vessels
• ⁠Installing and commissioning electrical systems on ships
• Supervising the work of marine engine technicians
• Inspecting and testing electrical systems and equipment
• Maintaining and repairing electrical systems and equipment
• Designing tray routes and electrical panel positions
• Creating single-line diagrams of lighting and other electrical panels
• ⁠Supervising the installation, cabling, and termination of electrical equipment
• Independently testing and Commissioning electrical panels
• Presenting surveys of electrical systems to relevant authorities

1. Design and Planning

• Review and interpret electrical designs, blueprints, and technical drawings.
• Coordinate with design engineers, architects, and other stakeholders to ensure that electrical plans align with project requirements.
• Propose modifications or improvements to electrical systems to enhance efficiency or safety.

2. Installation and Supervision

• Oversee the installation of electrical systems, equipment, and fixtures, ensuring compliance with standards and specifications.
• Supervise electricians, technicians, and subcontractors to ensure proper execution of tasks.
• Plan and allocate resources, including manpower, tools, and materials.

3. Quality Assurance and Compliance

• Ensure that all electrical work complies with local codes, standards, and regulations (e.g., NEC, IEC).
• Conduct regular inspections and audits to ensure quality and adherence to safety protocols.
• Test and commission electrical systems to confirm functionality and performance.

4. Troubleshooting and Maintenance

• Identify and resolve issues with electrical systems during installation or operation.
• Develop and implement preventive maintenance schedules for electrical equipment.
• Prepare troubleshooting guides and provide technical support as needed.

5. Safety Management

• Enforce safety protocols and ensure the use of appropriate Personal Protective Equipment (PPE).
• Conduct risk assessments to identify and mitigate hazards related to electrical works.
• Train staff on electrical safety and emergency response procedures.

6. Documentation and Reporting

• Maintain detailed records of electrical installations, inspections, and maintenance activities.
• Prepare daily progress reports, test reports, and as-built documentation.
• Report project progress and issues to the project manager or higher management.

7. Budget and Cost Control

• Estimate costs for electrical components and systems.
• Monitor project expenditures to ensure that electrical work stays within the budget.
• Suggest cost-effective solutions without compromising quality or safety.

8. Coordination and Communication

• Collaborate with other engineering disciplines to integrate electrical systems into the overall project.
• Communicate effectively with stakeholders, including clients, contractors, and suppliers.
• Attend project meetings and provide updates on electrical works.

9. Problem-Solving and Innovation

• Propose innovative solutions to overcome challenges during project execution.
• Stay updated on advancements in electrical engineering and incorporate new technologies where applicable.

• Prepare, schedule, coordinate and monitor the assigned engineering projects
• Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications
• Interact daily with the clients to interpret their needs and requirements and represent them in the field
• Perform overall quality control of the work (budget, schedule, plans, personnel’s performance) and report regularly on project status
• Assign responsibilities and mentor project team
• Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support
• Review engineering deliverables and initiate appropriate corrective actions

Job Description:

• Design FA project inclusive of tooling, artwork, material and process.
• Draft drawing for making of tooling and artwork.
• Liaise with suppliers regarding the making of tooling and artwork.
• Create job ticket which consists of material and process.
• Co-ordinate FA run with FA report submission
• Co-ordinate product transfer from US to Singapore facility.
• Develop and fabricate test jig/tool for testing of functionality of finish product.
• Maintain all test jig/ tool used in production.
• Perform product failure analysis, as well as reduce cost through yield improvement, cycle time reduction and process enhancement.
• Coordinate the Engineering Change Notice (ECN) process.
• Putting up sales quotation for the customer through the sales department.
• Any other task assigned

Requirements:

• Diploma in Electrical / Electronics / Mechanical or Microelectronics Engineering.
• Knowledge of 3D modeling software such as Pro/Engineer and AutoCAD.
• Need to be flexible on working hours as support over the weekends may be required.
• Must be a self-motivated team player with good presentation and communication skills
• Good project and time management capabilities

Responsibilities:

• Designs, plans, and handles testing, commissioning, software programming and supervision on site for BMS on project plan, specifications, and contract documents.
• Analyses plans, specifications, and contract to determine project requirements.
• Prepares submittals containing schematics, descriptions and technical literature as required. Maintains current design documents throughout project duration.
• Prepares engineering re-estimate reports and minimizes report variances.
• Perform testing & commissioning of BMS.
• HVAC experience and sequence of preparation for BMS
• Experience in BMS technical submittals preparation, method of statement, compliance statement and OMM.
• Experience in IO point schedules, assignments and materials selection with value engineering
• With logical knowledge in ACMV & HVAC system control logic.
• Network and MS office & project background knowledge is a must.
• Be aware of all kinds of risks and their controls in your work environment.
• Be a part of site EHS inspections, hazard/ risk assessments and recommend mitigation measures.
• Immediately inform the site EHS officer/site manager of any additional EHS risks.
  Stop the work if any unsafe conditions are identified.
• Project management skill required.

Requirements:

• Degree/ Diploma in Mechanical/ Electrical engineering or its equivalent

• Min 2 years related experience in HVAC/ BAS industry

• Strong customer management & problem solving skills

• Excellent communication & interpersonal skills