Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years Site/Working Experience

As a Service Engineer, you have to :

• Attend to equipment fault at customers’ premises.
• Liaise with the customer and sub-contractors regarding all aspect on the add-on project activities.
• Monitor the progress of the work done closely in order to ensure that the schedule and quality of work are met.
• Ensure that all materials and equipment are delivered on time as per schedule for site installation or rectification of fault.
• To carry out periodic maintenance for our customers.

You should :

• Possess a Diploma in Electronics and/or Electrical Engineering.
• 2-3 years’ hands-on experience in troubleshooting of card access systems, alarm systems, CCTV, etc.
• With good interpersonal communication skills.
• Have a valid Class 3 license.
• Be ready for rotating stand-by duty.

Job Responsibilities:

• Responsible for liaising with Engineering team on technical drawings, layout and clients specifications, clarifying system isometric drawings, equipment foundation drawings, drawing of parts, material lists and additional drawings for production support
• Prepares planned schedule for logistic and manpower arrangements under the supervision of senior team members and responsible for the product hierachy in outfitting installation
• Performs supervision on site to ensure outfitting installation work have been safely and appropriately executed according to the arrangement and coordination plans and sequence in outfitting production
• Coordinates with other production team members, subcontractors and consultants to resolve technical issues on-site which affect the outfitting schedule and project deliverables
• Liaises with QA/QC, owners, statutory and classification authorities for completed outfitting installation inspection and acceptance (i.e.piping systems, HVAC, electrical cabling, fitting equipment and equipment foundation) to sign off completion
• Performs on-site checks on the recorded checklists, ensuring the information is accurate and generates reports on work progress for senior team members’ review
• Maintains a high level of efficiency, ensuring good housekeeping, resource optimisation and effective material management to continuously improve the execution of outfitting scope of work
• Continually improves and implements safe work environment, efficient and effective methods for reducing project man-hours, costs and improving schedule
• Identifies, trouble-shoots problems and performs root cause analysis study on recurring cases of defects by resolving to corrective and preventive measures to improve process performance
• Works with other Production team members as required to achieve functional objectives and deadlines
• Provides support in various projects as required to promote cross-functional learning and development, balance team workload and enhance overall team productivity
• Incorporates HSEQ work cultures and best practices to ensure the successful implementation of HSEQ management systems
• Maintains and executes HSEQ procedures, policies and programmes and drives continuous improvement through risk-based thinking and analysis
• Supports the conduct of HSEQ management system audits to ensure compliance with legislations and company policies

Job Requirements:

· Bachelor’s degree in Marine/ Mechanical Engineering, or related engineering disciplines

· 3 years of working experience in planning and construction of outfitting scope of work in the oil and gas industry

· Experience in engineering outfitting activities in marine engineering projects

· Excellent proficiency in English (written and spoken)

· Knowledge and experience in the interpretation of outfitting diagrams, general mechanical drawings and its elements to deliver class approved documents and drawings

· Knowledge of engineering analysis techniques and tools/software applications (i.e.3D modeling software such as Cadmatic or Aveva Marine etc.)

· Familiar with material and equipments (i.e.main engine, generator, pump, deck machinery, mooring equipment, switchboard, etc.) used in outfitting design

· Some knowledge and experience in site inspection standards, class rules requirements and industry codes

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Title: Project Engineer

Occupation: Mechanical Engineer / Fire Protection Engineer

Industry: Industrial Pump Supply

Job Highlights

• 5 Days Work Week
• Attractive Employee Benefits
• Guaranteed 1-Month Bonus + Attractive Sales Incentive
• Work-Life Balance
• Ample Opportunities for Growth

Job Description

We are seeking a dedicated Project Engineer to support our growing team.

As a key player in the company, you will:

• Support the Project Team in pump selection, quotations, technical documentation, and drawings
• Follow up with customers and suppliers on inquiries and orders
• Liaise with customers, suppliers, and internal departments to ensure project deadlines are met
• Initiate and request orders for required project supplies
• Coordinate project timelines and resources

Requirements

To be successful in this role, candidates should have:

• A minimum of a Diploma in Mechanical Engineering or a relevant field
• Project coordination experience
• Strong critical thinking and time management skills
• Ability to work independently in a fast-paced environment
• Analytical, detailed-oriented, flexible, and dynamic mindset
• Strong written and verbal communication skills
• 2D AutoCAD skills are essential (Good AutoCAD skills are an advantage)
• A Class 3 Driving License is preferred but not mandatory

Skills Required

• Project Coordination
• Mechanical Engineering
• AutoCAD (2D)
• Technical Documentation
• Time Management
• Verbal Communication
• Critical Thinking
• Project Management
• Commissioning
• Ability to work independently

Layout Engineer for Silicon IP development

We are looking for an Integrated Circuit (IC) layout engineer for silicon IP development for emerging satellite and high-reliability applications.

Job Description

· Develop digital and analog library cells in various technologies (e.g. CMOS & SOI)

· Layout digital cells for various trade-offs (including speed, power, area, reliability)

· Layout analog circuits and IO circuits

· Characterize digital cell cells for timing and power analyses

· Construct test structures for validating various digital and analog cells

· Analyze the reliability issues (e.g. soft-errors) for various digital cells

· Support the front-end team for System-on-Chip (SoC) integration

· Document the development of digital and analog cells

Minimum Qualifications

· Possess at least a Bachelor Degree or equivalent in Electrical & Electronic Engineering or any related field with background on Integrated Circuit Design (both Analog and Digital)

· Knowledge in Electronic Design Automation (EDA) tools (e.g. Cadence, Synopsys, Silvaco)

· Knowledge in cell characterization tools (e.g. Liberate or SiliconSmart or Viola)

· Knowledge in Application Specific Integrated Circuit (ASIC) designs (full custom design methodology)

· Knowledge in digital circuit reliability issues (e.g. latch-up, soft error rates, aging, threshold voltage shift, etc.)

· Experience in digital foundation library cell development (e.g. combinational cells, sequential logic cell, memory cells, IOs)

· Experience in library cell characterization (e.g. understanding in various timing and power models)

· Experience on circuit testing

· Proficiency in English

• Total Plant Maintenance (Preventive maintenance & Corrective maintenance)
• Daily operations suport (Including Ah-hoc & CAPEX Projects)
• Shutdown, Pit-stop/Turnaroundworks
• Plant start-up commissioning support
• Computerized maintenance management system
• Condition Monitoring/Reliability Engineering
• Identifying project goals and scope
• Planning and documenting project tasks
• Ensuring deliverables are delivered on-time
• Managing all project resources
• Effectively communicating with stakeholders
• Eliminating blockers and potential risks
• Documenting projects process using various project management tools
• Ensuring top-quality results and project success

Key Accountabilities: ​

Sales Engineering and Application Matters

• Provides the design, drawing and documents for the customer’s technical requirements.
• Calculates, verifies, selects the right equipment/suppliers.
• Provides the technical specifications and defines the scope of supply for the equipment.
• Provides and maintains the product and sales engineering information.
• Uses the computerized engineering tools/database, technical library information and factory standards for the engineering work.
• Prepares and carries out technical presentations and training.
• Familiarize oneself with the applicable international and in country technical standards.

Sales Support Matters

• Work closely with sales to define the technical scope of supply.
• Reviews/clarify customer’s specifications & tender documents.
• Provides technical solutions and scope of supply.
• Coordinates with factory and local suppliers for scope of supply.
• Provides total product and project cost calculation.
• Provides technical specs, scope of supply and work with suppliers/contractors to obtain proposals and quote for the equipment timely.

Order Execution

• Raises the necessary purchase requisitions for the scope of supply.
• Manages the order with internal departments, suppliers and contractors till all contractual requirements are fulfilled.
• Verify on the clarification of the order, sales engineering, and drawings/documents.
• Knowledge in SAP tool

Qualifications and Skills:

• University / college studies in Electrical or Mechanical engineering.
• Experience in the diesel/gas engine/generator industry, min. 7 years.
• Hands on experience on engineering, site supervision and commissioning of diesel genset with knowledge of electrical power systems and genset control system
• Knowledge of engineering calculation for and related to genset and electrical systems.
• Review electrical schematics, wiring diagrams, P&ID and system layouts.
• Knowledge and Project execution in the packaging and testing of genset.
• Knowledge in Autocad would be an added advantage.
• Knowledge of switchgear and electrical power protection would be an added advantage.
• Adaptable to different cultures and business practice
• Excellent team player with an open mindset, collaborative spirit and excellent communication skills.
• Proactive and positive attitude.
• Proficient in English language. Fluent in Mandarin would be an added advantage.
• Willingness to travel.

Job Duties and Responsibilities:

• Responsible for trouble shooting and resolving all welding quality and productivity issues through active engagement with the customers and production supervisors
• Develop and draft new welding procedures, including procedure qualification training
• Trouble-shoot and provide support to the Production on all welding quality issues
• Conduct random inspections to ensure that the welding activities carried out conform to the relevant customer specifications, codes and standards
• Directs and coordinates technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with national code requirements; or testing welding personnel for certification
• Contacts personnel of other agencies, engineering personnel, or clients to exchange ideas, information or offer technical advice concerning welding matters
• Perform any other related duties as assigned by Immediate Supervisor

Requirements:

• Diploma/ degree in Metallurgical/ Material/ Mechanical Engineering
• At least 4 years of relevant experience in preparation of WPS, PQR and welders’ qualification
• Knowledge of API, ASME-IX, NACE MR00175 codes and ISO 9001:2015 standard
• Certified Welding Inspector or CSWIP

DUTIES AND RESPONSIBILITIES

• Develop and debug test equipment, executable software, and code.

• Works with testing equipment to develop user friendly software.

• Take on various engineering tasks which will help to acquire new skills.

• Design software architecture and optimize the performance.

• Data acquisition and manipulation using different hardware.

• Provide customer support to internal and external stakeholders in person, over the phone or via email.

• Provide documentation for new or existing designs.

• Follow and familiarize self with company policies and procedures.

• Performs tasks accurately and efficiently, free from errors.

• Adapts to changes in the work environment, manages competing demands and is able to deal with change, delays or unexpected events.

• Energetic, enthusiastic, positive outlook.

• Listen attentively and able to grasp fast-paced technical conversations.

• Maintain a clean and organized work area on a daily basis.

• Consistently at work and on time, follows instructions, responds to management direction and solicits feedback to improve performance.

REQUIRED SKILLS

• Experience with using LabVIEW, CTT, Python, and C#C

• Excellent technical writing abilities

• Excellent conceptual, analytical, and problem-solving abilities.

• Excellent computer skills – CAD, word processing, and spreadsheets.

• Confidence to evaluate risks and tradeoffs and present solution options to management.

• Ability to influence to deliver schedules.

• Strong analytical and problem-solving skills required.

The Senior Engineer, Projects, will lead and manage projects from initiation to completion, ensuring alignment with scope, budget, and timeline requirements. This role involves overseeing mechanical and electrical components' fabrication, assembly, and installation while coordinating with cross-functional teams to meet project objectives.

Responsibilities

• Lead projects, ensuring timely delivery, adherence to scope, and budget compliance.
• Oversee fabrication, assembly, and installation of mechanical and electrical components.
• Coordinate with factories, contractors, and cross-functional teams to align objectives.
• Review and interpret mechanical drawings, specifications, and technical data.
• Ensure fabrication adheres to layouts and designs.
• Collaborate with the procurement team to ensure timely material delivery.
• Conduct quality checks, testing, and inspections to maintain standards.
• Resolve technical issues and implement corrective actions.
• Planned and coordinated with after-sales teams to ensure smooth workflows.
• Maintain project documentation, including progress reports, Gantt charts, and technical records.
• Supervise inbound and outbound activities.
• Inspect parts to ensure compliance with BOM and data sheets.

Requirements

• Degree or Diploma in Mechanical Engineering or related field.
• 5-7 years in a similar role or industry.
• Proficiency in AutoCAD, Microsoft Office Suite, and project management tools.
• Knowledge of mechanical systems, equipment, and industry standards.
• Strong analytical and decision-making abilities.
• Ability to manage multiple projects simultaneously.
• Detail-oriented with excellent problem-solving skills.
• Strong communication and coordination abilities.
• Preferred candidates should have access to a vehicle.

Job Responsibilites

• Prepare Master Program and update progress monthly.
• Prepare Progress forecast of rolling programs and update of resources.
• Resolve any instrumentation issues & recording.
• Coordinate with services department about diversion work and schedule.
• Ensure overall site progress are updated according to schedule.
• Prepare monthly progress report for client/consultants.
• Assist Project Manager in the preparation and submission of verified work done to Quantity Surveyor.
• Any other adhoc duties as assigned by management.

Job Requirements

• Possess a Degree Civil Engineering and above or equivalent.
• At least 5 years of experience in construction planning and programme coordination for railway projects.
• Computer literate with proficiency in planning software such as Microsoft Project, AutoCAD, P6 Primavera.
• Experience in LTA Projects will be advantage.
• Willing to be based at project site office and work 5.5 days.

Job Responsibilities:

- Perform basic and advanced machine electrical wiring works

- Develop electrical testing jigs and perform testing and validation of machines

- Lead the production team to strictly adhere to production schedule and same time improving the manufacturing process to improve quality, cost, and productivity.

- Creates, implements, and monitors KPI indicators on product quality and section capability

- Provide shop floor feedback to Production Engineering and D&D Department

- Assist the Production Manager to provide quality, cost effective and efficient support for launching of new machine models

- Perform machine pre & post machine power ON inspection checks, machine parameter settings, testing and inspection according to standard

- Able to troubleshoot and resolve machine electrical non conformance

- Perform machine final electrical inspection and adjustments for any defects to maintain high level of quality

- Prepare reports on productivity, quality, claims, etc

- Work with engineering and other departments to improve assembly processes

- Monitor the serviceability of measuring electrical instruments or jigs and fixtures and reporting to Supervisor or Manager any non-compliance condition

- Maintain accurate records of inspection result at each electrical process

Job Requirements:

- Minimum Diploma or equivalent in Electrical required

- 2-3 years working in a machine assembly environment

- A good track record of supporting the department achieving KPI

- Strong understanding of 5S and HSE knowledge

- Able to work effectively in a fast and ever-changing stressful environment

- Maintain good Quality standards, 5S and safety discipline

- Well verse in Microsoft office (Excel, Words, Powerpoint and Outlook)

- Knowledge of drawing software(Solidworks, Unigraphic, etc) is added advantage

Job Description

- Work with Production Engineers, Supervisors and Technician to design, develop, and improve engineering processes.

- Planning and coordinating of production schedule and production output.

- Plan and implement improvement projects for productivity improvement

- Ensuring all monthly operating expenses stay within allocated budget.

- Support inspections of equipment and scheduling maintenance or repairs with Maintenance Dept

- Inspecting inventory and reporting inconsistencies as well as ordering more materials.

- Producing CAD drawings, nesting thru company smart system according to our standard specifications.

- Evaluating first article and processes and ensuring standardization of quality assurance measures.

- Calibrating and troubleshooting of equipment /machines as required.

- Perform time study and improve standard time hour

Job Requirements:

- A degree or minimum diploma in Engineering discipline.

- Minimum 2 years' experience in precision engineering in manufacturing industry

- Proficient in 3D drawing software – Solidworks

- Proficient in Microsoft Office

- Familiar with manufacturing quality assurance techniques

- Understand 5S discipline, TQC and other quality improvement tools

- Good interpersonal skills, problem-solving and project management skills

We are looking to hire a Senior Process Engineer to work on projects in the Pharmaceutical and Biopharmaceutical sectors.

Key responsibilities:

• Design of process and utilities – preparation of PFDs, P&IDs, equipment sizing calculations
• Coordination of design with other design disciplines and equipment suppliers
• Ownership of equipment modules and packages through design and procurement phases
• Completion of Design Risk Assessments
• Participation in Technical and Safety reviews
• Interfacing with client design team/end users
• Process optimization/site support

Requirements

• Degree in Chemical/Process Engineering (or equivalent)
• At least 8 years of design and project experience in the Pharmaceutical and Biopharmaceutical sectors.

What you can expect

• The opportunity to work on a range of projects, from conceptual stage through to detailed design, commissioning and qualification.
• Career enhancement due to the wide scope of the projects and experience you will receive.
• Work closely with Industry leaders

Responsibilities:

• Prepare detailed cost breakdown as per the scope including detailed material take off, activity wise resource requirements, subcontractors, indirect costs, etc
• Communicate with purchase dept & suppliers to get competitive quote for materials by negotiation
• Liaise with internal departments (Sales, QA/QC, Production and Purchase) to collect project information & data
• Prepare technical proposal including statement with estimated cost in time.

Requirements:

• Diploma or Degree in Mechanical Engineering or related discipline, with minimum 2 years’ cost estimation experience in the Oil and Gas, Petrochemical/Chemical industries, handling similar products is an advantage
• Experience in preparing proposals/tendering preferred
• Fresh graduates are also welcome to apply
• Good application knowledge of MS Office
• Strong communication and negotiation skills
• Only Singaporeans or Singapore PR need to apply

Meranti Power Pte Ltd, a fully owned subsidiary of Energy Market Authority, is currently in the final phase of power generating station development. and will thereafter, operate and maintain the power generating station. We are inviting applicants for the position of Senior Engineer, Electrical who shall report to the Head, Electrical. The scope and requirements are as follows:

RESPONSIBILITIES :

A. Current & future Project

• Ensure compliance to the prevailing Workplace Safety and Health Act and all relevant authorities’ regulations.
• Assist the Project Director and Head (Electrical) in all phases of Project Cycle related to all electrical systems and equipment including conceptual stage, drafting work scope for Owner’s Engineer consultant, system design and engineering stage, execution stage and right up to commissioning.
• Work with the Consultants for the timely completion and cost-effective implementation of the projects.
• Participate in the design review, implementation & commissioning of new power plants’ Electrical systems, including evaluation and recommendations for acceptance of the Consultants/Contractors’ Electrical systems engineering design and selection, procurement, and installation proposals for the power plant to ensure successful commissioning on time & within budget.
• Detect and provide prompt triggering of risks or potential risks to avoid/minimize delays or losses, recommend cost effective plans and monitor finances to ensure each phase of Electrical system works is started and completed on time and within the budget allotted.
• Attend meetings with various stakeholder to report on project progress against milestones and challenges faced
• Manage problems resolution processes with Head (Electrical) and consultants with respect to power plant project Electrical systems design, implementation, installation, and commissioning and resolve co-ordination/interfacing issues with other parties.
• Provide status updates to Head (Electrical) for report to MP’s Senior Management on progress of major Electrical systems project activity against the schedule, highlighting significant milestones and any issues/interfacing affecting or may affect project cost and schedule.
• Support Head (Electrical) to communicate, coordinate and collaborate with Contractor, external parties and agencies (SPPG, EMA/ PSO, JTC, etc) with regards to Meranti Power’s 400kV Switchhouse/ Substation, SPPG feeder connections, Gas Insulated Switchgears, Generator Step-up Transformer, Insulated Phase Bus Duct, etc. at different stages of the project (including Commissioning).

B. Operation & Maintenance Phase

• Be familiar with all regulations pertaining to the Electrical systems of the power station’s equipment, auxiliaries and common systems maintenance works and safety, e.g. Workplace, Safety & Health Act’s Regulations, including Risk Assessment and Mitigating Measures, Work Methods, Permit-to Work, Lock-Out-Tag-Out System in relation to maintenance of Electrical equipment in the power generation station.
• Prepare technical specifications for equipment electrical parts and work services when required. Work with Procurement to manage the procurement of Electrical parts and services.
• Coordinate all Electrical Maintenance programmes (Predictive, Preventive, Corrective) and liaising with relevant stakeholders to ensure safe and timely completion of works.
• Be familiar with Predictive Maintenance monitoring techniques.
• Familiar with use of Computerised Maintenance Management System (CMMS).
• Manage and optimize all planned plant/equipment electrical maintenance activities during minor and major overhauls and inspections
• Responsible for the functional tests and analyse the failures related to Electrical systems and components and recommends remedial/mitigation measures to prevent recurrence. Troubleshooting of faults/defects & carry out failure analysis to determine root cause.
• Study, evaluate and implement plant improvement projects to enhance overall plant reliability, availability and performance
• Supervision of Electrical maintenance contract works and prepare work procedures and risk assessment for all Electrical maintenance activities
• Manage day-to-day activities of Electrical team effectively; may be appointed as Reporting Officer to technical officers.
• Support Head (Electrical) to engage and manage Licensed Electrical Worker (LEW), Qualified Persons (QP), Competent Persons (CP) to carry out the required services and works.
• Track the year-to-date expenditure against the approved department Electrical budget; Support Head (Electrical) to prepare upcoming budgets.
• Prepare Department’s Electrical monthly report
• Design, coordinate and conduct training on Electrical matters

C. Other tasks

• Perform administrative tasks for the benefit of the organization as instructed by Head (Electrical) or Senior management e.g. secretariat for meetings, staffing duties, presentations, etc.
• Take part in organisation-wide activities in various capacities such as organising committees for events,
• Attend training/ events/ conferences that is in line with the organisation objectives and proceed to share the learning points for organisation benefit

REQUIREMENTS :

• Degree in Electrical Engineering or equivalent.
• Major Project Management experience with at least 3 years in power plants development, implementation, commissioning tests, preferably including operation/electrical maintenance of large power plants, specifically employing Combined Cycle Technology.
• Conversant with international and local codes, standards and recommended practices for design and selection of electrical equipment related to the above plants will be an added advantage.
• Hands-on experience in power plant projects’ tender preparation including technical/functional and commissioning tests specifications for C&I equipment, tender evaluations, contract negotiations, contract administration and contract supervision.
• Experience in overseeing the power plants worksite’s adherence to Workplace Safety & Health, and relevant regulatory requirements.
• Will be required to work beyond office hours in event of plant exigency or emergency.
• Self-motivated, results focused and willing to work under tight schedules with multi-disciplinary teams.
• Able to lead a technical team and harness and direct the strengths of the different members to output greater effect than the sum of each individual. ·
• Willing to work in construction site office during construction stage and Jurong Island. (Morning transportation pick-up points available at different parts of Singapore.)

Only shortlisted candidates will be notified.

By submitting your personal data and/or resume to Meranti Power Pte. Ltd. (“MP”), you shall be deemed to have given your consent to MP for collecting, using, and disclosing your personal data for the purpose of assessing your job application.

Responsibilities:

• Responsible to contribute to product cost savings through identifying opportunities for cost savings & build value engineering project pipeline
• Develop methodologies, templates and approach for target costs based on product analysis data
• Analyze and evaluate design for materials, manufacturing process & supply chain for value analysis / value engineering opportunities
• Execute & drive VAVE projects starting from Idea generation to implementation
• Co-ordinate with Global & local stake holders including suppliers for project execution including samples, prototypes and testing requirements
• Build active VAVE project funnel and build active VAVE project funnel and todDrive multiple VAVE projects in a timely manner to support business goal target
• Establish and update processes for execution on teardown, benchmarking and VAVE requests

Requirements:

• At least 5 years of working experience in the EMS or an MNC environment
• Strong analysis skills, knowledge in material pricing and strategy
• Strong knowledge in Mechanical/Electro-Mechanical/Electronics commodities

Interested candidates are to submit a detailed resume to speed up the application process.

We regret to inform that only shortlisted candidates will be notified.

Thank you for applying.

Activate Interactive Pte Ltd (“Activate”) is a leading IT solution and service provider headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Internal Code: A25021

This is a one-year contract role

What will you do?

• Oversee the planning, design, execution, monitoring, controlling and closure of assigned projects
• Plan and manage all aspects of the project’s tasks assigned and ensure on time delivery
• Schedule project meetings with vendor, stakeholders and users
• Collaborate and facilitate discussions with work groups and relevant stakeholders
• Record of project meeting minutes.
• Prepare project reports for management review
• Proactively managing projects issues and risks
• Create and maintain comprehensive project documentation
• Validate system functionalities and ensuring the requirements are delivered accordingly to technical specification
• Work closely and report to the Board’s project manager and stakeholders on the project progress, delays and any other matters pertaining to the assigned projects regularly
• Supervise Board’s contractor’s work to ensure the work is completed to the Board’s satisfaction
• Preparation and submission of necessary documents (clearance form, Change Request form and others) to carry out the work
• Other assigned ad-hoc project administrative tasks

What are we looking for?

• Bachelor's degree in Computer Science, Information Technology, or related field.
• At least 5 - 7 years of experience in system projects implementation, preferably cybersecurity projects
• Experience in managing multiple projects
• Basic knowledge in security practices, vulnerability assessment, penetration testing, firewall, IDS
• Knowledge in IEC 62443
• Experience in Operational Technology and/or ICS; certifications such as SANS GSEC, (ISC)2 CISSP
• Proven experience in managing security tools and common infrastructure services.
• Strong knowledge of SFTP, SMTP, SMS, Proxy, DNS, Active Directory, Server/Network administration and automation technologies (At least 4 out of 8 domains is needed)
• Experience with security assessments, audits, and compliance standards.
• Proficiency in scripting and automation tools for infrastructure management.
• Experience in procurement and maintenance of security tools and infrastructure components.

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

• Manage & develop new customers based for service sales in the industrial, Marine & Offshore/Oil Gas market.
• Responsible for maintaining a high standard level of customer services and good customer relation.
• Responsible for maximizing a high level of profit margin and ensure meeting the pre-set sales target.
• To identifying and developing sales & marketing strategies to exhaust opportunities in the local market as well as to exploit overseas markets.
• Make sales presentation and provide technical support to customer
• Gather information on market demand, competition and latest technologies.
• Submission of weekly, monthly and quarterly reports.

Job Description & Responsibilities:

Reporting directly to the Assistant Project Manager, Project Manager, Senior Project Engineer is responsible for the following:

• Lead and manage project supervisors to ensure the successful completion of projects.
• Ensure adherence to project budgets, schedules, and scope of work, while deploying appropriate staff resources.
• Review and assess project drawings, plans, specifications, and other relevant documents.
• Identify and troubleshoot issues arising during project execution and implement timely resolutions.
• Conduct and actively participate in weekly site meetings to monitor project progress.
• Collaborate with the Safety Officer to ensure compliance with quality standards and health & safety regulations.
• Monitor site staff to ensure strict adherence to all safety regulations.
• Strong analytical and problem-solving skills, resourceful and meticulous;
• Highly motivated and pro-active with the ability to work both independently as well as in a team;
• Perform night work based on project needs.
• Prepare and submit project reports in a timely manner.
• Develop project drawings, including as-built drawings and shop drawings, as required.
• Perform any other tasks as assigned by the Assistant Project Manager, Project Manager.

Knowledge/ Skills/ Abilities:

• Knowledge of building and structural details, working drawings and local construction practices.
• Knowledge of local regulations and engineering standards.
• Good verbal and written communication skills.
• Good organizational and interpersonal skills.
• Able to work independently and as a team.
• Good time management skills with exceptional attention to detail and ability to manage multiple tasks/ projects at one time.
• Familiar with tender and bidding processes.
• Familiar with local regulations pertaining to building, construction and safety.

Requirements:

· Diploma/Bachelor’s degree in Electrical Engineering or related field.

• Proficient in Microsoft Office (Outlook, Word, Excel and PowerPoint) for Windows.
• Ability to work with flexibility to work long hours when necessary.

· Minimum 5 years of experience in electrical engineering, in Residential/Industrial/Commercial and/ and other types of buildings and/or construction.

• Certification in BCSS (Building Construction Supervisor Safety) or higher safety certification.

· Proficiency in electrical design software (AutoCAD, Revit, Navisworks,BIM360, ACC), strong knowledge of electrical codes and standards, excellent problem-solving and communication skills.

Job Description:

• Inspection of project sites
• Coordinate, manage, and supervise all the instrument installation and monitoring works
• Liaise and coordinate with contractor for installation and monitoring issues
• Attending site progress meetings, preparing meeting minutes and coordinating with clients
• Process and interpret monitoring readings
• Coordinate with the construction team to minimise obstruction and damage to the monitoring instruments
• Supervise and quality control in instrumentation works
• Other ad hoc duties as assigned

Requirements

• Relevant education background in Civil Engineering / Geotechnical / Geology
• Min 3 years of working experience in instrumentation and monitoring works
• Experience in LTA projects
• Senior position will be considered with relevant experience
• Only Singaporeans

You may send your resume / CV to email address directly:

[email protected]

Digify is a cloud-based document security and data room software that allows customers to control, protect and track important documents after sharing them. Companies use Digify to protect confidential information for fundraising and due diligence, secure intellectual property, and protect sensitive communications.

Digify is used in 138 countries today. We have more than 600,000 users worldwide.

The Role

Digify is seeking a talented and motivated Full Stack Developer to join our team. You will play a vital role in developing and maintaining end-to-end solutions that drive the success of our products and services. The ideal candidate is passionate about coding, eager to learn, and ready to contribute to the development of innovative document security solutions. You will work closely with cross-functional teams to design, develop, and maintain applications that meet business requirements and delight users.

WHAT YOU WILL BE DOING

• Front-End Development:
  • Develop responsive web interfaces using modern frameworks such as React and Angular.
  • Ensure seamless user experiences by integrating front-end designs with back-end systems.
• Back-End Development:
  • Build and maintain APIs, microservices, and integrations
  • Design and manage databases, such as DynamoDB and PostgreSQL, to ensure efficient data storage and retrieval.
• Collaboration & Problem Solving:
  • Work closely with UI/UX designers, product managers, and other developers to implement new features.
  • Debug and optimize code for performance, scalability, and reliability.
• Testing & Deployment:
  • Write and maintain unit, integration, and end-to-end tests.
  • Assist with deployment and maintenance of applications in cloud environments such as AWS

WHAT YOU NEED TO HAVE

• Bachelor’s degree in Computer Science, Software Engineering, or a related field, with 3 to 5 years of professional experience as a Full Stack Developer.
• Basic understanding of cloud platforms, such as AWS and GoogleCloud, and serverless architecture
• Proficiency in front-end technologies: HTML5, CSS3, SASS and one modern framework (e.g., React, Angular).
• Proficiency in back-end development using languages like NodeJS, .Net, Python
• Familiarity with database management systems such as DynamoDB, MySQL and PostgreSQL
• Good understanding of Design Patterns and Data Integration Patterns
• Good understanding of application performance, scalability, security engineering
• Knowledge of version control systems, particularly Git.
• Strong problem-solving and troubleshooting skills
• Experience with providing third level support of production environments
• Strong sense of ownership
• Good communication skills and the ability to work collaboratively in a team environment.
• Utilize and integrate with tools like Jira & Confluence, Bitbucket and any kinds of code analysis tools like Codacy.

Job Responsibilties

• Provide after-sales product and technical support - engaging with customers, clarification meetings, supporting 3rd party events.
• Design BMS system architecture, HVAC control system and optimization program tailored to each upgrading project requirement.
• Analyse existing BMS operation and HVAC performance to propose system renewal and control system improvement.
• Support project management team on existing building upgrades including testing and commissioning.
• Troubleshoot Yamatake and Azbil product problems for existing maintenance at job site.
• Track and analyse recurring faults or issues in BMS and other monitoring systems to identify patterns.
• Use trend date to provide insights on system vulnerabilities and potential areas for improvement.
• Perform various engineering calculation, equipment sizing and selection and procurement of equipment ensuring it meets safety standards and performance requirements.
• Supports the Sales on technical aspect to formulate Business Development plan for Building Automation Solutions in Singapore.
• Liaise with various departments in Headquarter in Japanese language to report the latest trends and requirements of Singapore Market
• Identifies industry trends, collects and assesses competitive and market intelligence.
• Regularly contact with Japanese and non- Japanese customers to exchange information.

Requirements

• Bachelor's degree in a technical discipline preferred;
• Minimum 4 years of experience in BMS and Automation industry
• Well versed in specification and selection of Yamatake and Azbil building automation system and product, not limited to system and controller but including field devices like sensors, control valves
• Strong communication presentation skills with the ability to present technical information to non-technical stakeholders.
• Proficiency in Japanese Language both verbal and written is a must

Education:

Diploma/Degree in Electrical Engineering, Computer Engineering, Computer Science

or with experience of at least 3 years and above
or both.

Programming Competency:

Competent in programming languages C++, C#, SQL database and .Net Framework 2.0 and above environment.

Competent in PLC and inverter systems preferred

Other Requirements

Only S’pore citizens/PRs need to apply.

Able to lead a small team in projects.

Need to communicate with project/site managers regarding project requirements.

Proficiency in English essential as submission of site reports is required.

Preferred

Competent in PLC and inverter systems preferred

Knowledge and experience in port and warehouse cranes, preferred.

Able to use Autodesk electrical CAD with hands on electrical experience, preferred.

Candidates with class 3 driving license are preferred.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule