Job Description:

• To own, maintain and improve the following indices: Quality, Uptime and Cost.
• Sustain equipment KPI and make continuous improvements to enhance the performance.
• Monitor and control equipment performance indices. Optimize PM procedures to make it more effective and efficient.
• Coordinate with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives.
• Manage the logistics for parts so as to prevent prolonged uptime losses in the case of equipment failure.
• Manage the expenditure allocated for equipment maintenance without compromising on quality output.
• Continuous improvement of equipment KPI in terms of quality, uptime and costs.
• Plan and implement an effective Preventive Maintenance program on equipment.
• Coach and Mentor subordinates to ensure that skill level and knowledge are up to date, and continuously give feedback on their work performance.
• Document Corrective Action and Best Known Methods, and Fan it out to all for maximum ROI and learning.
• Participate in CIP programs to optimize equipment utilization and cost of maintenance.
• ecome the technical Expert for the respective machine specialization.
• ● Know how to use SPACE to monitor and analyze SPC charts. Know how to use JMP to analyze engineering experiments. Know how to use measurement instruments effectively in data collection.
• Understand FMEA and be able to generate FMEA analysis for new tool. Able to utilize it to identify tool weaknesses and derive the top 3 to 5 risk factors.
• Able to create PROMIS (SiView) DC OP and SPC charts.
• Coordinate new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production.
• Wafer scrap reduction awareness and mindset.
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers.
• Self audit and update specifications to meet TS16949 Quality Standard requirements.
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager.

Job Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• Preferred 3 years of relevant work experience in Etch Equipment
• LAM & Oxide tools preferred
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Roles & Responsibilities

• Review requirements, design, develop, implement and maintain software applications for data acquisition and control systems with OT (including but not limited to OPC UA, BACnet, Modbus) and IT (including but not limited to MQTT, REST).
• Collaborate closely with system engineers and system integrators to ensure seamless integration of software components with existing systems.
• Perform unit testing, integration testing, and system testing to ensure software quality and reliability - benchmark and optimize performance as necessary.
• Create technical documentation, including software specifications, user manuals and test plans, while ensuring good documentation practices.
• Strong team player who is able to communicate well, and excited to lean new technologies in a fast pace environment.
• Stay updated on emerging technologies and industry trends in building automation and IoT.

Requirements

• Minimum Diploma/Degree in automation, information technology or equivalent.
• At least 1 year of working experience in building automation industry and relevant industry.
• Possesses strong knowledge on OPC UA, BACnet, Modbus.
• Possesses knowledge on SQLite, PostgreSQL, Python, Linux OS.
• Possesses knowledge on Containerization.
• Work individually or collaborate as a team.
• Require working onsite for project delivery.

Responsibiliites :

• Collaborate with the business development Team to develop and come up with detailed solar PV system designs that meet client requirements, local codes, and industry standards.
• Optimise system layout for maximum energy production and cost-effectiveness.
• Perform solar resource assessments to determine energy generation potential.
• Conduct shading analysis and assess site suitability for solar installations.
• Develop bill of materials (BOM) for projects.
• Use modelling software to predict system performance, energy output, and financial returns.
• Prepare and submit permit applications, ensuring compliance with local regulations and utility requirements.
• Coordinate with regulatory authorities to secure necessary approvals.
• Develop and implement quality control procedures for solar installations.
• Conduct inspections to ensure system integrity and safety standards.
• Provide technical guidance and support to installation teams during system setup.
• Troubleshoot and resolve technical issues as they arise.
• Create and maintain accurate and detailed project documentation, including schematics, drawings, and technical manuals.
• Monitor and ensure systems are operating optimally before handing over to clients.
• Promote and adhere to safety protocols and ensure that all installations meet safety requirements.
• Prepare weekly and monthly progress reports for every project to ensure that projects are within schedule.
• Provide technical support for sales, proposals, and during potential client meetings.
• Must be proficient in AutoCAD
• Solar experience is added advantage

Requirements :

• Diploma or Bachelor’s Degree in Engineering or relevant field
• Prefer two (2) years of relevant work experience
• Preferably with Energy Industry or Renewable Products background
• AutoCAD, PVSyst or Helioscope skills preferred
• Technical advisors, EPC contractors, BD related roles are welcome to apply

The Engineer is responsible for the engineering, maintenance and servicing of equipment and associated electrical and mechanical parts. He/She leads a team of Assistant Engineers and Technicians and general workers to ensure that maintenance works and services are carried out swiftly and in accordance with regulatory requirements to minimise disruptions to operations and ensure progression to meet project schedule.

The Engineer acts as a first point of contact for complex repairs and works closely with client and team to address and resolve technical and engineering issues. He/She develops maintenance and engineering regimes and ensures that they are implemented, and assesses risks and its impact on the organisation. The Engineer solves day-to-day issues and oversees the implementation of workflow improvements that may enhance clients' satisfaction, as well as optimise the use of the organisations resources.

The Engineer is a team player with strong leadership skills. He/She should be able to work under pressure, multi-task and work irregular hours, as well as be prepared to work at various heights.

~ Analyse risk management data.

~ Conduct audits on maintenance of equipment.

~ Develop, coordinate, or monitor all aspects of installation and commissioning.

~ Manage compliance to risk management frameworks, policies and processes.

~ Manage engineering resources.

~ Measure equipment efficiency to propose improvements.

~ Monitor maintenance and repair schedules to ensure compliance.

~ Oversees the deployment of staff to maintenance functions.

~ Prepares specifications and drawings installation.

~ Specify system components or direct modification of products.

~ Inspection on installation method

~ Effectiveness of the corrective action process and the improvement implementation

~ Documentation of the production inspection plan, process control plan, technical work instruction

~ Documentation of Corrective Action Request (‘CAR’), processing of returned material, maintenance of product quality tracking status

~ Plan and track receiving quality inspection results and records

~ Compile quality summary report

Work in construction sector

• Prepare shop-drawings and follow-up on subsequent comments.
• Attend project safety meeting and site co-ordination meeting.
• Arrangement of work with our site supervisors according to Builder's work program.
• Monitor materials purchase and delivery schedule.
• Implement variation work upon receiving new drawings and instructions
• Assist site staff in preparing as-built drawings, operation and maintenance manual.

Come help develop the future of software used in industrial automation. We are seeking individual with a real passion for learning that are curious and often challenge the status quo. Attitude, aptitude and integrity are central to all successful applicants. Together, we work to build our primary product, PCO.

PLC programmers are responsible for programming assembly lines, robotic devices, or other manufacturing processes using programmable logic controllers (PLC). This role is ideal for a detail-oriented, logical thinker who enjoys working with different machines in combination with computers. PLC programmers work full time but experience a moderate amount of travel and activity in the workplace, such as supervising the installation of their programs and machinery.

The daily responsibility involvement includes of the following;

• Design and perform detailed designing for machine electrical control systems;
• Write Programmable Logic Control (PLC) program for automatic machine control & processes.
• Develop process specific application function librabries.
• PLC application programming and build new function library.
• Ability to utilize, debug, design and install engineering software.
• To collaborate and work together with Design Team (comprising of both mechanical & electrical membes) for the design concept arising from new project proposal and confirmed projects;
• Diploma or Degree in Electrical Engineering OR its equivalents;
• Good knowledge of PLC and circuit design;
• Demonsrated ability to visualize projects, develop and produce design from concept through completion.
• Sound knowledge of process instrumentation, PLC programs such as Delta, Mitsubishi, Matsushita, Omron PLC, Direct Logic, Siemens.
• RS422, RS485, Modbus TCP and other industrial interface protocol.
• Knowledgeable of VB, VC, C# will be considered as an added advantage;

Plus;

• Programming experiece in C++, Python, SQL or similar language.
• Industrial electrical panel design.
• HMI/SCADA programming (Allen-Bradley, Ignition or similar).

The Engineer is responsible for the engineering, maintenance and servicing of equipment and associated electrical and mechanical parts. He/She leads a team of Assistant Engineers and Technicians and general workers to ensure that maintenance works and services are carried out swiftly and in accordance with regulatory requirements to minimise disruptions to operations and ensure progression to meet project schedule.

The Engineer acts as a first point of contact for complex repairs and works closely with client and team to address and resolve technical and engineering issues. He/She develops maintenance and engineering regimes and ensures that they are implemented, and assesses risks and its impact on the organisation. The Engineer solves day-to-day issues and oversees the implementation of workflow improvements that may enhance clients' satisfaction, as well as optimise the use of the organisations resources.

The Engineer is a team player with strong leadership skills. He/She should be able to work under pressure, multi-task and work irregular hours, as well as be prepared to work at various heights.

~ Analyse risk management data.

~ Conduct audits on maintenance of equipment.

~ Develop, coordinate, or monitor all aspects of installation and commissioning.

~ Manage compliance to risk management frameworks, policies and processes.

~ Manage engineering resources.

~ Measure equipment efficiency to propose improvements.

~ Monitor maintenance and repair schedules to ensure compliance.

~ Oversees the deployment of staff to maintenance functions.

~ Prepares specifications and drawings installation.

~ Specify system components or direct modification of products.

~ Inspection on installation method

~ Effectiveness of the corrective action process and the improvement implementation

~ Documentation of the production inspection plan, process control plan, technical work instruction

~ Documentation of Corrective Action Request (‘CAR’), processing of returned material, maintenance of product quality tracking status

~ Plan and track receiving quality inspection results and records

~ Compile quality summary report

• 5+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

• 7+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

• 5+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

We are hiring for our client in the Electronics Manufacturing industry : Mechanical Engineer

Boon Keng / Aljunied area

Up to $3700 depending on experience

830am to 6pm Mon to Fri

Duties :

• Engage in the creation and modification of sheet metal component designs using ZWCAD and Solidworks software

• Develop detailed design drawings and specifications and involve in sheet metal materials selection according to project requirements

• Participate in quality control and quality assurance activities, including inspections and tests, support inspection report during FA/PPAP

• Maintain accurate records of design changes, project progress, and technical specifications in ERP and Agile

• Prepare technical reports, drawings, and documentation for internal and external use

• Reverse engineering and product design of rack

• Collaborate with the sheet metal manufacturing team to ensure that sheet metal components are produced according to design specifications and work instructions

To apply : please email your resume to [email protected], or WhatsApp your resume to Shaun at 97125389

Shaun Lim Tau Szen R2094941

Recruit Express Services 13C6614

• Location: Henderson Road
• Working Hour: 5 Days work Week 9AM – 6PM
• Salary: $4,500 - $5,000

Responsibilities:

• Be the primary technical contact for customers and in house repair jobs
• Assist customers in the repair and maintenance activities, but also with Providing spare parts and associate services
• Identify and translate customers’ requests ;
• Handle technical incidents and establish reports (troubleshooting, expertise, gathering useful information for analysis
• Guarantee, when necessary, the proper processing of offers : spare parts, onsite interventions and repairs.
• Coordinate onsite interventions actions and ensure an ongoing communication to the customer.
• Provide technical assistance to the Repairs Department and Field Service Technicians + Business Centers ;
• Occasionally promote to customers, technical training sessions and sales of spare parts and repairs ;
• Initiate, together with the appropriate stakeholders, the implementation of corrective actions that arose from customer complaints/claims.
• Be the technical interface within the departments, such as Engineering, Purchasing, Sales, Production, Global Service and customers
• Identify potential sales opportunities and forward the information to the sales teams.
• Identify the spare parts needed for Sales team to quote to customer
• Recommend spare parts needed for regular maintenance/during troubleshooting
• Acts as last form of technical checks to make sure the spares quoted is according to customer’s requirement
• curb warranty costs.
• Be responsible for the collection of outstanding payments for the Customer Service department
• Maintain proper records of interaction with customers within the CRM tool
• Control offers and order confirmation as per applicable procedures

Requirements:

• Have 3 to 5 years of experience in Mechanical Engineering. Marine engineering with mechanical knowledge will also be considered.
• Degree in Mechanical Engineering
• With hands on experience on compressors, turbines and pumps mechanically
• Be willing to travel if needed.

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee (Ashley) Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Project Engineer

Working Days: 5.5days

Working Timing: Mon to Fri 8:30am to 5:30pm & Sat 8:30sm to 12:30pm

Working Location: Woodlands / Site Office

Salary: $3,000 to $6,000 depending on experience

Requirements

Candidate must possess at least a Diploma, Advanced/ Higher/ Graduate Diploma or Degree in Mechanical, Electrical Engineering

Experience in chiller system

Responsibilities & Duties

Knowledge of M&E project requirements and contract requirements

Able to manage projects/ claims/ sub-contracts

To able to work odd hours (if necessary)

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

about the company

Our client is a leading global leader of semiconductor solutions. They have operations globally across Taiwan, Europe, China, Korea etc. and they’re now on a look out for a Senior/Design Engineer to join their dynamic team during an exciting time in their development.

What you will be here for

• Design and develop semiconductor equipment
• Participate in design review by providing mechanical design inputs relating to DFM and DFA
• Develop, test and document designs for transport mechanisms, vacuum systems, and various process stations
• Prepare and release 3D solid Models and Engineering drawing
• Devise the initial concept of the assigned device, component or system and participate in the overall detailed product design

What you will need

• Degree in Mechanical or Mechatronics Engineering
• Min 6 years of experience in machine / semiconductor equipment design
• Must process knowledge and experience in the design of automation or semiconductor equipment
• Must process good knowledge for 3D CAD software
• Knowledge of ECO release of Manufacturing quality documentation
• Experience in dynamic electromechanical system design
• Equipment troubleshooting experience will be a plus

If you are interested in the position , kindly send your CVs to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

Responsibilities

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Requirements

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Candidate must have min 6 years of relevant working experience in design engineering of ACMV / HVAC, Fire Protection and Plumbing services with Engineering Consultancies in Singapore
• Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)
• BIM and CAD capabilities (REVIT / Microstation / Autocad) will be added advantage

Job Description

• Oversee project execution during design, construction and testing and commission works for water and wastewater treatment works or process plant engineering and construction works.
• Lead the technical presentation to Client and Consultant
• Coordinate with Client, Consultant, Client Site Technical Representative(s), Subcontractors and Suppliers during project execution.
• Process Mechanical Work Design in water and wastewater treatment plants and pumping station and pipeline.
• Prepare and submit Process Mechanical Technical particular to Consultant/Client and following up on technical submission till its approval/acceptance by Consultant/Client.
• Control and monitor process mechanical work progress with Sub Contractors and suppliers on the mechanical technical documentation and physical work deliverables.
• Assist PM on progressive monthly claim and payment response matters with Sub Contractors and Suppliers.
• Coordinate with Project QS/PM for establishing of contractual scope of mechanical works and its technical requirements and participating in calling of quotation and assists Procurement Team during awarding of Sub Contract/Supply Contract.
• Prepare O&M Manual and As Built drawings for handing over to client.
• Support PM for project schedule or manpower arrangements.

Requirements

• Degree in Mechanical/Chemical/Environmental Engineering。
• Experienced Mechanical Engineer with qualifications recognized by the PEB Singapore.
• At least 15 years of relevant experience in plant construction fields and preferably in Water and Wastewater Industries in Singapore or in Southeast Asia Region.
• Have experience in water and sewerage pumping station including pipe laying works.
• Good knowledge of Design/Coordination and the Code of Practices and its requirements such as American Standard, British Standard and Singapore Standards.
• Good knowledge of relevant software: Microsoft Office (Word and Excel). Knowledge of CAD, BIM, and Project Scheduling will be an added advantage.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Assistant Mechanical Engineer (Assembly)
• Working Location: Woodlands
• Working Hours: 5 days (Monday to Friday, 8.30 am – 5.30 pm)
• Salary Package: Basic up to $3500 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Assemble, debug, and test-run customized modular machines.
• Handle the commissioning of these machines.
• Provide technical support at customer locations to ensure proper equipment operation.
• Implement design improvements to simplify designs, reduce parts, and use cost-effective alternatives, while maintaining or enhancing product performance.
• Procure or assist in procuring necessary items to perform the above duties effectively.
• Write and maintain all required documentation, including work and assembly instructions, as well as manufacturing and test procedures.

APPLY NOW!!!

• Nitec, Higher Nitec, or Diploma in Mechanical Engineering with 2 to 3 years of relevant industry experience.
• Knowledge of industrial automation, jigs, fixture design, FMEA, SPC, and CAD as well as experience in machine design are added advantages.
• Ability to work independently with minimal supervision.
• Willingness to travel as required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67302 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition.

Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging its sector expertise and global track record.

Sembcorp has a balanced energy portfolio of 21.2GW, with 14.4GW of gross renewable energy capacity across 10 countries*.

Its urban development projects span over 14,000 hectares across Asia and have generated over 377,000 employment opportunities and attracted close to US$50 billion of investment capital.

Sembcorp is listed on the main board of the Singapore Exchange. It is a constituent stock of FTSE Russell Index, MSCI Singapore Index, Straits Times Index as well as sustainability indices including FTSE4Good Index, iEdge SG ESG indices and several MSCI ESG indices.

For more information, please visit www.sembcorp.com.

Purpose and Scope

• Able to perform corrective Mechanical Maintenance for all Power Plant Stationary and Rotary Equipment located in Banyan CCP3 and BWWT as assigned by Mechanical Engineer /Supervisor.

Key Roles and Responsibilities

• Carry out inspections as per daily maintenance schedule; attend defects, breakdowns, including the repairing and calibration of Mechanical Equipment.
• Conduct disassembling and assembling of Mechanical Equipment and of Gas turbine, Steam Turbine, HRSG, BOP and BWWT for repairs/rehabilitation.
• Hands on experience of valves, pumps, compressors, piping, safety valves, control & shutoff valves etc
• Assist the Maintenance Mechanical Engineers to troubleshoot/ fault diagnosis/ failure analysis to determine cause of failure.
• Assist the Maintenance Mechanical Engineers to develop Risk Assessment and mitigation measures for every Maintenance job in the plant
• Apply for Permit to Work (PTW) as the Competent Person (CP) for every Maintenance work in the plant
• Supervise contractors and liaise with other maintenance crafts and operations technicians to execute maintenance activities
• Withdraw and prepare spares from warehouse for job execution.
• Prepare daily updates on Maintenance activities for the day to all stakeholders (operations)
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)

Qualification, Skills and Experience

• Min ITE in engineering field
• Preferably minimum 3 years of experience in the relevant maintenance fields in a power plant / petrochemical industry

Behaviour/ Traits:

• Organized, detail oriented and ability to multi task.
• Good team player and able to deliver results within tight deadlines
• Strong interpersonal, communication and presentation skills
• Independent with initiatives, resourceful and positive attitude.
• Possess good leadership skills

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

· Institution-first Mindset – Put the interest of the Group ahead of individual interests.

· Collaboration – Deliver through collaborating across markets, businesses and functions.

· Accountability – Hold team and self accountable to deliver on our commitments.

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Job Description

• Industry/ Organization Type: Chemical Manufacturer
• Position Title: Maintenance Technician (Mechanical)
• Working Location: West (Nearest MRT: Tuas Crescent)
• Working Hours: 5 days (Monday-Friday: 8 am-5 pm)
• Salary Package: Up to SGD 5500 + Allowance SGD 220 + OT Pay + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintain, repair, and troubleshoot all plant equipment.
• Schedule and perform preventative maintenance.
• Participate in 5S and Total Productive Maintenance (TPM) teams.
• Assist in developing new equipment or plant expansion projects.
• Ensure contractor safety and oversee specific inspections or maintenance tasks.
• Maintain accurate maintenance records.
• Safely handle hazardous chemicals within the plant.
• Perform mechanical preventative and corrective maintenance on plant utilities, facilities, and manufacturing equipment.
• Operate and maintain systems such as steam boilers, water treatment, HVAC, air compressors, chemical and gas systems, and fire protection systems.
• Assist in spare part management.
• Maintain effective communication between shifts for smooth work transition.
• Process permits, conduct job safety analysis, and manage Lock-out, Tag-out (LOTO) procedures.
• Review and contribute to maintenance documentation such as Safe Work Procedures (SWP) and Job Safety Analysis (JSA).
• Report work progress to supervisors daily or as needed.
• Use a Computerized Maintenance Management System (CMMS) to manage work orders and checklists.
• Ensure contractors and third-party vendors execute maintenance tasks efficiently and adhere to safety regulations.
• Perform equipment or system testing, commissioning, and inspections to hand over to the operations team after maintenance or project completion.
• Participate in routine safety drills, troubleshooting, and failure analysis.
• Serve as an on-call technician for emergency maintenance after working hours.
• Suggest and implement ideas for continuous improvement in maintenance procedures to optimize costs, processes, and safety standards.
• Assist in maintaining spare parts inventory and ensure proper preservation in the store.

APPLY NOW!!!

• Min. ITE in Engineering.
• Min.3 years of maintenance experience in a related field, ideally within a chemical manufacturing environment.
• Proficient in the use of hand and power tools.
• Have basic knowledge of process control, refrigeration, boilers, steam systems, pumps, heat exchangers, Lockout/Tagout (LOTO) procedures, and industrial safety practices.
• Experience in electrical work or water treatment is an advantage.
• Willing to work OT on Sat.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68758 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

1. To coordinate with consultants / subcontractors on the shopdrawings / samples / method statements and keep all involved parties updated of the latest changes.
2. To attend to project / technical meeting and resolve site issues with owner / consultants in order for the site progress to proceed smoothly.
3. To verify the work done on site are in accordance to the approved drawings / specifications / authority’s requirement and also ensured that the subcontractor carry out rectification for non-compliance.
4. To resolve site issues with consultants / subcontractor / supplier ASAP in order to minimise delay to the construction progress.
5. To ensure that the related documentations are updated and ready for ISO audit.
6. To cooperate with the safety department and carry out the assigned duties within the safety framework.
7. Assist site management team in project Planning & coordination.
8. Plan and schedule work sequences for construction operation.
9. Arrange and prepare documents for authorities’ submission for Conquas, RI, TOP etc.
10. To study tender / construction drawings, specifications, and contracts to understand project requirements.
11. Understanding of critical project criteria related to schedule & productivity.
12. Must be a team player and ability to work in a cross-functional team environment.
13. Strong oral and written communication skills.
14. Able to work independently, proactive and self-motivated.
15. Able to provide guidance to new staff / junior staff.
16. Minimum of 5 years of relevant experience.

Job Description

• Industry/ Organization Type: M&E Consultancy Firm
• Position Title: Mechanical Engineer (Building and Infrastructure)
• Working Location: East – Paya Lebar
• Working Hours: 5 days (Mon-Fri: 8.30 am - 6 pm)
• Salary Package: Up to SGD 5500 + Bonus
• Duration: Permanent

Key Responsibilities

• Build relationships with clients, consultants, and contractors from other organizations
• Carry out duties in accordance with company procedures and implement prescribed systems of work
• Understand design philosophy/design fundamentals and communicate engineering solutions to project stakeholders
• Perform engineering calculations with the aid of engineering software such as Computational Fluid Dynamics (CFD), and Full Hydraulic Calculation (FHC)
• Familiar with Architect, Structural/Service Engineers drawings/specifications.
• Carry out investigative and technical review works
• Responsible for the development and production of drawings/calculations/specifications /reports
• Set an example for the placement of students and younger engineers

APPLY NOW!!!

• Degree in Mechanical Engineering recognized by PEB Singapore
• Min. 2 years of working experience in the consultancy firm in the design of ACMV, fire, and hydraulic services
• Experience as a Contractor in project execution will be considered
• Experience in Energy Storage System (ESS) / Capability in carbon, sustainability, resources conservation, and renewables will be an added advantage.
• Carry out tasks and duties assigned in a positive and dignified manner

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67061 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Summary
The Program Engineer or Senior Engineer will support business development activities, oversee the execution and transfer of new programs to designated operational sites, and ensure programs meet both internal and external customer goals and standards. This role involves managing cross-functional teams to successfully implement new projects in the production/manufacturing unit while maintaining cost and schedule objectives.

Key Responsibilities

• Lead and direct cross-functional teams in the execution of programs.
• Ensure the successful qualification and implementation of new projects in production units.
• Track and monitor project progress to meet timelines and cost objectives.
• Actively follow up on sales leads and take the lead in business development activities.
• Serve as the primary technical contact for customers on strategic or sensitive issues.
• Prepare quotations for molding projects involving new tooling.
• Collaborate with manufacturing teams to establish workflows and production concepts that optimize efficiency and meet customer requirements.
• Identify and define engineering requirements for new projects.
• Initiate equipment procurement activities as needed, in collaboration with the Purchasing team.
• Plan and execute tooling qualification activities with supporting teams to ensure project success.
• Ensure compliance with workplace health and safety (EHS) policies and actively contribute to EHS initiatives.

Requirements

• Degree in Mechanical Engineering or a related field.
• No experience require as training provided.
• Experience managing healthcare products is an advantage.
• Strong understanding of project management and production processes.
• Proficiency in IT tools (MS Office).
• Excellent communication, organizational, and planning skills.
• Ability to work independently, take initiative, and manage multiple tasks in a fast-paced environment.

Interested candidates please apply online or send your latest CV to [email protected]

We regret to inform that only shortlisted candidates will be notified. Your response to this advertisement constitutes informed consent for the collection, use, and/or disclosure of personal data by AlwaysHired and its affiliates for job application processing and administrative purposes, in compliance with the Personal Data Protection Act.

AlwaysHired Pte Ltd

Reg No: R1549345

EA: 24C2293

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541