Responsibilities:

• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall produce and review all design deliverables, including design specifications, schedules, drawings, and calculations, and have a comprehensive knowledge of CAD and BIM design.
• The candidate shall review clients' or third-party designs and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall challenge client asset standards where a clear opportunity exists to use an alternative, cost-effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX
• Preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The candidate shall have about 8 years of experience in mechanical design works, preferably with contractor experience in water and wastewater industry
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be advantageous, by reviewing pump calculations, hydraulic calculations, P&IDs, Process Flow Diagrams and technical specifications
• General experience in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Lead a project team in the following for Mechanical (M&E) services for building projects:

• Concept designed.

• Detail design development.

• Contract documentation.

• Authority submission.

• Site administration to project completion.

Requirements:

• Singaporean / PR.

• At least 5 years of working experience in the related Building Consultancy/Project Management field.

• Bachelor’s Degree in Mechanical or related discipline.

• Good inter-personal skills.

• Self driven and able to work independently.

• Basic Proficiency in AutoCAD and BIM.

Salary: $4,500 to $5,000

Key Responsibilities

Perform engineering analysis under general supervision

Design or modify mechanical engineering layouts/schematics and/or detailed drawings/specifications of moderate scope under general supervision

Perform and document engineering tests under general supervision

Generate related alpha/gamma documentation for product release under general supervision

Coordinate the procurement and assembly of mechanical components/equipment and identify sources of critical parts and subsystems to resolve moderately complex technical issues

Troubleshoot a variety of mechanical problems of moderate difficultly under general supervision

Implement concepts of moderate product issues and mechanical solutions of moderate difficulty

May be responsible for the design, development and implementation of custom mechanical tooling, fixturing, and associated processes to enable the handling, assembly and/or disassembly of parts, components, sub-assemblies and final assemblies throughout the product life cycle

Functional Knowledge

• Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities

Business Expertise

• Understands key business drivers; uses this understanding to accomplish own work

Leadership

• No supervisory responsibilities but provides informal guidance to new team members

Problem Solving

• Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents

Impact

• Impacts quality of own work and the work of others on the team; works within guidelines and policies

Interpersonal Skills

• Explains complex information to others in straightforward situations

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 5 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities:

• Perform scheduled plant inspection according to maintenance regime as well as ensuring that our gas plant, auxiliaries and common systems are maintained according to SOPs, and in compliance with regulations and requirements and in a safe manner.
• Coordination of all Mechanical Maintenance programmes (PM & CM)
• Manage and optimize all planned plant/equipment maintenance activities during minor and major overhauls and inspections.
• sponsible for the functional tests and analyse the failures related to mechanical systems and components and recommends corrective actions to prevent re-occurrence. Troubleshooting of faults/defects issues & carry out failure analysis.
• · Study, evaluate and implement plant improvement projects to enhance overall plant reliability, availability and performance
• Execute approved plant improvement works
• Supervision of maintenance contract works and prepare work procedures for all maintenance activities
• Prepare technical specifications for equipment parts and work services. Manage the procurement of parts and services to meet the maintenance needs

Requirements:

• Degree in Mechanical Engineering
• At least 8 years in mechanical maintenance
• Experience in power plant or related process plant experience
• Leadership experience will be a plus

Account Manager:

Kerwin Tan Kai Bin (R1331624)

[email protected]

EA16S8107

• Taking the conceptual design through to implementation and handover;
• Progressing all elements of design in-line with the Design Checklist;
• Production of tender specifications and ensuring these align with contractual obligations;
• Mentoring of Mechanical Designers with the intent of securing properly trained personnel for the continual expansion of the company;
• Ensuring the System Supervisor is provided with the current shop and space management drawings, specifications, approved technical submittals and all approved changes in scope;
• Ensuring the System Supervisor is fully briefed on the awarded scope of work, the tender technical documents and all contractual revisions to tender documentation;
• Evaluating technical submittals for specification and client requirement compliance;
• Approving Test Packs at each step of construction through to completion;
• Forwarding testing and commission passing criteria to the System Supervisor;
• Evaluating progress claims against work complete;
• Evaluating contractor variation quantity claimed is accurate.

Elsa Fontanne (CEI No. R24124496)

Recruitment Consultant

Contact Number: 67860100

Email Address: [email protected]

Recruit Express Pte Ltd / EA Licence No: 99C4599

We regret only shortlisted candidates will be contacted

Lead a project team in the following for Mechanical (M&E) services for building projects:

• Concept designed.

• Detail design development.

• Contract documentation.

• Authority submission.

• Site administration to project completion.

Requirements:

• Singaporean / PR.

• At least 2 years of working experience in the related Building Consultancy/Project Management field.

• Degree in Mechanical or related discipline.

• Good inter-personal skills.

• Self driven and able to work independently.

• Basic Proficiency in AutoCAD and BIM.

• Salary $2,500 to $3,500

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description

Key Responsibilities

Problem identification and troubleshooting a variety of difficult mechanical problems with limited supervision

Define, coordinate, perform, and document engineering test reports with limited supervision

Develop, design, or modify mechanical engineering layouts/schematics and/or detailed drawings/specifications of difficult scope

Perform engineering analysis of difficult scope with limited supervision

Technically lead and/or execute engineering projects, including development of key suppliers. Generate mechanical product specifications.

May be responsible for the design, development and implementation of custom mechanical tooling, fixturing, and associated processes to enable the handling, assembly and/or disassembly of parts, components, sub-assemblies and final assemblies throughout the product life cycle. Establishes standards across all operational processes

Specify and review engineering documentation

Implements concepts for variety of complex product issues and mechanical solutions

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Working Day: 5 Day | Mon – Fri 8.30am – 6pm

Location: Ang Mo Kio

Salary: $6,000 - $9,000

Requirements

• Degree / Diploma in Electrical Engineering, Mechanical Engineering or Building Services.
• Min 8-10 years’ experience in Mechanical (ACMV) services.
• Good knowledge in Mechanical works, planning capability and authorities / statutory compliance.
• Good knowledge and experienced in Design & Build Tender for Mechanical (ACMV) services is preferred

Job scope

• Preparation and submission of Mechanical tenders, including reviewing technical specifications, cost estimates and project timelines.
• Taking charge on Mechanical QS related matters and responsible from tender to pre-contract and post contract administration duties.
• Prepare tender clarifications, liaise with consultant, attend site visit and tender briefings/meetings.
• Responsible for interpretation of specifications, compliances, review of tender drawings for any discrepancies and any other relevant document.
• Conduct detailed technical evaluations of tender documents to ensure compliance with project requirements and industry standards.
• Identify potential risks and challenges associated with tender submissions and develop mitigation strategies.
• Plan and execute with tender team to achieve KPI.
• Suggest Value Engineering solution for MEP works, if required, in the tender.
• Assist in the presentation slide, technical write up for tender submission/interview and attendance of tender interview.
• Involve in project write up such as understanding scope of work, manpower histogram, programs and project schedule using Microsoft Project software.
• Provide technical expertise and guidance to support the decision-making process during tender evaluations.
• Evaluating quotations from sub-cons/suppliers according to tender requirement.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years Site/Working Experience

At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you’ll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients and customers. We foster an inclusive culture and are looking for diverse, talented people to join Alcon.

As an Engineer under Engineering- Manufacturing System and Automation, you will be tasked to provide operational technical support to drive productivity and product quality with GxP compliance and regulatory requirements. You will also assist to drive/ execute control and automation projects and provide maintenance, backup and restore for IPC and PLCs. You will also carry out / support investigation for non-conformances.

In this role, a typical day will include:

· 1st level engineering support for major equipment downtime [24x7 supports]

· Focus on solving recurring/ long-term equipment issues through detailed understanding of the design or engineering concepts.

· Maintain and perform routine check and backup/restore for Industrial PCs/ PLCs.

· Lead and support automation/control related projects. Develop/review project documentations and related SOPs. Perform equipment/software validation.

· Prepare training materials on respective process/ system/ equipment in term of operation, maintenance or troubleshooting.

· Innovate, provide and implement ideas for process or equipment improvement.

· Ensure the system/equipment are comply with HSE, and Alcon quality requirement

WHAT YOU’LL BRING TO ALCON:

· Minimum 0-3 years of intensive hands on experiences in technical (Electrical/ Mechatronic /Electronic/Physics/ Automation) troubleshooting and experience on Siemens S7/TIA Portal, Beckhoff TwinCAT and/or Allen Bradley PLC.

· Experience on factory automation system installation/validation and understanding of GMP/GDP requirement.

HOW YOU CAN THRIVE AT ALCON:

· Good team player

· Enjoy working with various cross functional team across manufacturing site

Alcon Careers

See your impact at alcon.com/careers

• Oversee daily construction activities, ensuring compliance with safety regulations, quality standards, and project specifications.
• Collaborate with architects, engineers, and other construction professionals to develop project plans and schedules.
• Monitor project expenses, track budgets, and implement cost-saving measures where possible.
• Conduct regular site inspections to ensure that construction work meets design specifications and safety standards.
• Address and resolve any issues or delays that arise during the construction process.
• Maintain accurate records of project progress, changes, and communications with stakeholders.
• Ensure all work complies with local building codes, regulations, and company policies.
• Prepare and present progress reports to project managers, clients, and other stakeholders.

Qualifications:

• Bachelor’s degree in Civil Engineering from an accredited institution.
• Preferably with atleast 2 years of experience in construction engineering or a related field.
• Proficiency in construction management software (e.g., Procore, Buildertrend)
• Strong understanding of construction methods, materials, and legal regulations.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership abilities.

· Site project management.

· Overall project planning, scheduling, monitoring and updating to meet project completion targets.

· Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.

· Work closely with sub-contractors on project progress and ensure timely work arrangements

· Liaise with consultant and carry out site inspection.

· Attend weekly or monthly meeting with sub-contractors on work progression and prepare monthly meeting progress report.

· Preparation of structural analysis, loading calculation and drawings.

· Establish good relationship with all relevant parties.

· Ensure site safety & compliance to authorities’ requirements.

Requirement

- Degree in Civil or relevant Engineering

- 3-5 years’ minimum experience in Infra-structure project more than 200million.

· Site project management.

· Overall project planning, scheduling, monitoring and updating to meet project completion targets.

· Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.

· Work closely with sub-contractors on project progress and ensure timely work arrangements

· Liaise with consultant and carry out site inspection.

· Attend weekly or monthly meeting with sub-contractors on work progression and prepare monthly meeting progress report.

· Preparation of structural analysis, loading calculation and drawings.

· Establish good relationship with all relevant parties.

· Ensure site safety & compliance to authorities’ requirements.

Requirement

- Degree in Civil or relevant Engineering

- 3-5 years’ minimum experience in Infra-structure project more than 200million.

Job Description :

• Project management and daily operations including inspections, handover, site measurements, project management.
• Prepare submission of shop drawing, method statement, progress claims and project management reports.
• Supervise and monitor projects are carried out in accordance to company's operating procedures, quality standards and contractual specifications.
• Ensure environmental, safety and health practices are carried out at all times.

Requirements :

• Candidate must possess at least a Diploma / Bachelor's Degree in Civil Engineering or its equivalent.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Min. 5 years of working experience in Construction Industry are preferred.
• Strong analytical and communication skills.

· Site project management.

· Overall project planning, scheduling, monitoring and updating to meet project completion targets.

· Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.

· Work closely with sub-contractors on project progress and ensure timely work arrangements

· Liaise with consultant and carry out site inspection.

· Attend weekly or monthly meeting with sub-contractors on work progression and prepare monthly meeting progress report.

· Preparation of structural analysis, loading calculation and drawings.

· Establish good relationship with all relevant parties.

· Ensure site safety & compliance to authorities’ requirements.

Requirement

- Degree in Civil or relevant Engineering

- 3-5 years’ minimum experience in Infra-structure project more than 200million.

Able to design the electrical system in the construction projects.

Must ensure compliance in the electrical systems.

Able to do coordinate installation.

Able to do maintenance and test activities.

Able to solve the issues in the electrical projects in the construction projects.

Able to lead the team of workers and site supervisors.

• Making plans using detailed drawings
• Preparing estimates and budgets
• Creating accurate project specifications
• Designing engineering experiments
• Creating technical reports for customers
• Completing regulatory documents concerning safety issues
• Finishing projects on time and within budget
• Communicating with clients and coworkers about analysis results

Responsibilities:

• Analyse project/business needs and necessary technical requirements, activities and employees, monitor planning continuously and take corrective measures if necessary.
• Coordinate the different technical activities (conceptual design, built, mobilisation, commission, maintenance and repair) in own focus area.
• Prepare and request budget for technical activities (based on detailed specifications), manage actuals and present views.
• Ensure conceptual, basic and detailed design is executed according to needs defined and in accordance with compliance regulations.
• Write technical specifications to workshops/shipyards, suppliers and service providers for technical asset production, repair and/or maintenance, evaluate proposals and decide on parties, in accordance with Technical Specifications and in agreement with Technical Manager, draft contract/PO and ensure execution/delivery according to these agreements.
• Have relevant expertise in the technical field, keep up with relevant developments in the own area and related areas of expertise and contribute to the (technical) field by developing new, state of the art knowledge and exchanging knowledge with colleagues.

Requirements:

• Relevant tertiary qualifications/Degree/Diploma/Master in Science or Engineering (or equivalent knowledge and experience)
• With minimum 7 years of relevant work experience
• Meticulous, organised and attentive to details in the midst of a fast-paced environment
• Analytical and problem-solving skills
• Excellent verbal and written communication skills in English
• Proficiency in MS Excel and IT skills

Our Company
Powerzone H2 Technologies is a provider focusing on the design, manufacture, and distribution of PEM fuel cells.
We aspire to be the leader in Hydrogen fuel cell system integrator and solution provider in the APAC region.
We are hiring a talented engineering professional to join our team.
If you're excited to be part of a winning team, Powerzone H2 Technologies is a great place to grow your career.

Job Scope

· Work with the research center for scale-up production/ manufacturing· Troubleshoot and advise on electrical and mechanical Fuel cell systems together with superior. Do fuel cell product testing

· Monitoring stock level and dealing with suppliers for the production process

· Answer all technical enquires and maintenance requirements from customers as assigned by the Manager

· Complete projects on time and within budget. Carry out any other work directly by your immediate superior or Director

· Cooperate with the team to solve problems

Requirement

· Bachelor's Degree or equivalent in Engineering or Other Advanced Diploma / Post-Diploma qualifications in Electronic Certificate equivalent

· With at least 2 years of working experience in a relevant field ( Fresh graduates are welcome to apply)

· Good computer skills i.e MS Office Suite and MS Project, Autocad, Photoshop

· Fast learner

· Good problem-solving, organizational, analytical, and critical thinking skills

· Ability to manage your project effectively

· Must be able to work in a team environment, including the ability to manage vendors and project stakeholders

· Demonstrate proactiveness in handling tasks at hand.

· Previous experience working with lab/industrial equipment required (if applicable)

Responsibilities :

• Perform electrical and electronic conceptual details design work.
• Responsible for the analysis, definition, design, construction, testing, installation, modification, and maintenance of automated machines, containing software as the major component.
• Writes new machine program, makes modification to existing machine software, or integrates software application.
• Creates and executes until testing and integration testing ensuring machine software meets requirements.
• Identify, define and implement the technical architecture for use of auto visual inspection in our product within budget and schedule.
• Review electrical and electronic documents/drawings.
• Creates, reviews, and maintains all required technical documentation/manual related to assigned software to ensure supportability and reuse.
• Participate in project planning sessions with team members to analyze development requirements.
• Reviews project work with the team, included the machine design engineers and engineering engineers.
• Provide timely status updates for areas of individual responsibilities within projects to superior.
• Provides technical support to operations or other development teams.
• Overall responsibility for technical issues and coordinate with other disciplines.
• To participate in the continuous improvement programs to explore ways and means to improve production efficiency and reliability.

Requirements :

• Bachelor's Degree in Electrical, Electronics Engineering with min one (1) years of relevant experience.
• Experience working with vision system database.
• Knowledge of camera, light, and lens selection for applications ranging from defect detection to part location.
• Programming background with high-level languages such as Visual C# WPF, C++ and Python.
• Experience in developing vision system with Halcon and Opteon camera.
• Good knowledge in Machine Vision programming and experiences.
• Good experience on automation controls, motors & sensors like PLC, CTC, Beckoff PC and controllers, Servo & Stepper motors.
• Familiarity with wiring/cabling size/terminations and load/temperature requirements.
• Familiarity with industrial machinery design.
• Skilled in the utilization of statistical analysis.
• Required to travel regionally (average 20% of the time).
• 5 days work week.
• Transport pick-up at Bedok MRT station.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Key Responsibilities:

• Responsible for MEP Design, taking off BOQ, sourcing the quotation and prepare quotation.
• Lead the development and submission of high-quality M&E tenders, ensuring compliance with all client requirements and deadlines.
• Attend site visit for tender briefing.
• Interpretation of tender specifications, client requirement, drawings and any other relevant documents; not limited to Project Presentation, Schedule of Rates, Technical Data, Risk Assessment, Bill of Quantity and documents needed for Tender Submissions.
• Understand how to do MEP design to comply with Singapore Standard
• Liaise with suppliers and contractors to get proposals/quotations and carry out evaluation
• Able to assist client for Value Engineering
• Conversant with Singapore building codes and regulations
• Demonstrate effective communication and consultative skills
• Strong in communication skills and a team player
• Provide guidance and support to project teams in the implementation of successful M&E practices.
• Ensure adherence to company policies and procedures throughout the tender process.

Job Requirements:

• Preferably hold a Diploma or Degree in Electrical Engineering
• At least 2 years of relevant working experience in Interior Fitting Out M&E Works
• Preferably have knowledge on how to prepare M&E technical design, technical write-up, prepare tender specifications and presentation slide for tender interviews
• MUST understand the process of tender preparation and submission
• MUST have experience in project costing and estimating
• MUST know BCA Green Mark Requirement
• Strong in Tender Presentation Skill
• Highly self-motivated, good working attitude with high level of professionalism & integrity
• Well-versed in MS offices tools i.e. Words, Excel and PowerPoint
• Strong understanding of M&E methodologies and best practices.
• Excellent written and verbal communication skills.
• Requires travelling to various worksites in Singapore
• Requires to perform night work/weekends when need arises
• Candidates with more experience may be considered for a senior role.
• This position is only open to Singapore citizens and Permanent Residents.